Peter Ujfalusi | 3744c26 | 2012-11-27 11:09:57 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Driver for TWL4030/6030 Generic Pulse Width Modulator |
| 3 | * |
| 4 | * Copyright (C) 2012 Texas Instruments |
| 5 | * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms of the GNU General Public License version 2 as published by |
| 9 | * the Free Software Foundation. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, but WITHOUT |
| 12 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 13 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 14 | * more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License along with |
| 17 | * this program. If not, see <http://www.gnu.org/licenses/>. |
| 18 | */ |
| 19 | |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/platform_device.h> |
| 22 | #include <linux/pwm.h> |
| 23 | #include <linux/i2c/twl.h> |
| 24 | #include <linux/slab.h> |
| 25 | |
| 26 | /* |
| 27 | * This driver handles the PWMs of TWL4030 and TWL6030. |
| 28 | * The TRM names for the PWMs on TWL4030 are: PWM0, PWM1 |
| 29 | * TWL6030 also have two PWMs named in the TRM as PWM1, PWM2 |
| 30 | */ |
| 31 | |
| 32 | #define TWL_PWM_MAX 0x7f |
| 33 | |
| 34 | /* Registers, bits and macro for TWL4030 */ |
| 35 | #define TWL4030_GPBR1_REG 0x0c |
| 36 | #define TWL4030_PMBR1_REG 0x0d |
| 37 | |
| 38 | /* GPBR1 register bits */ |
| 39 | #define TWL4030_PWMXCLK_ENABLE (1 << 0) |
| 40 | #define TWL4030_PWMX_ENABLE (1 << 2) |
| 41 | #define TWL4030_PWMX_BITS (TWL4030_PWMX_ENABLE | TWL4030_PWMXCLK_ENABLE) |
| 42 | #define TWL4030_PWM_TOGGLE(pwm, x) ((x) << (pwm)) |
| 43 | |
| 44 | /* PMBR1 register bits */ |
| 45 | #define TWL4030_GPIO6_PWM0_MUTE_MASK (0x03 << 2) |
| 46 | #define TWL4030_GPIO6_PWM0_MUTE_PWM0 (0x01 << 2) |
| 47 | #define TWL4030_GPIO7_VIBRASYNC_PWM1_MASK (0x03 << 4) |
| 48 | #define TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1 (0x03 << 4) |
| 49 | |
| 50 | /* Register, bits and macro for TWL6030 */ |
| 51 | #define TWL6030_TOGGLE3_REG 0x92 |
| 52 | |
| 53 | #define TWL6030_PWMXR (1 << 0) |
| 54 | #define TWL6030_PWMXS (1 << 1) |
| 55 | #define TWL6030_PWMXEN (1 << 2) |
| 56 | #define TWL6030_PWM_TOGGLE(pwm, x) ((x) << (pwm * 3)) |
| 57 | |
| 58 | struct twl_pwm_chip { |
| 59 | struct pwm_chip chip; |
| 60 | struct mutex mutex; |
| 61 | u8 twl6030_toggle3; |
| 62 | u8 twl4030_pwm_mux; |
| 63 | }; |
| 64 | |
| 65 | static inline struct twl_pwm_chip *to_twl(struct pwm_chip *chip) |
| 66 | { |
| 67 | return container_of(chip, struct twl_pwm_chip, chip); |
| 68 | } |
| 69 | |
| 70 | static int twl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| 71 | int duty_ns, int period_ns) |
| 72 | { |
| 73 | int duty_cycle = DIV_ROUND_UP(duty_ns * TWL_PWM_MAX, period_ns) + 1; |
| 74 | u8 pwm_config[2] = { 1, 0 }; |
| 75 | int base, ret; |
| 76 | |
| 77 | /* |
| 78 | * To configure the duty period: |
| 79 | * On-cycle is set to 1 (the minimum allowed value) |
| 80 | * The off time of 0 is not configurable, so the mapping is: |
| 81 | * 0 -> off cycle = 2, |
| 82 | * 1 -> off cycle = 2, |
| 83 | * 2 -> off cycle = 3, |
| 84 | * 126 - > off cycle 127, |
| 85 | * 127 - > off cycle 1 |
| 86 | * When on cycle == off cycle the PWM will be always on |
| 87 | */ |
| 88 | if (duty_cycle == 1) |
| 89 | duty_cycle = 2; |
| 90 | else if (duty_cycle > TWL_PWM_MAX) |
| 91 | duty_cycle = 1; |
| 92 | |
| 93 | base = pwm->hwpwm * 3; |
| 94 | |
| 95 | pwm_config[1] = duty_cycle; |
| 96 | |
| 97 | ret = twl_i2c_write(TWL_MODULE_PWM, pwm_config, base, 2); |
| 98 | if (ret < 0) |
| 99 | dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label); |
| 100 | |
| 101 | return ret; |
| 102 | } |
| 103 | |
| 104 | static int twl4030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 105 | { |
| 106 | struct twl_pwm_chip *twl = to_twl(chip); |
| 107 | int ret; |
| 108 | u8 val; |
| 109 | |
| 110 | mutex_lock(&twl->mutex); |
| 111 | ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG); |
| 112 | if (ret < 0) { |
| 113 | dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label); |
| 114 | goto out; |
| 115 | } |
| 116 | |
| 117 | val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE); |
| 118 | |
| 119 | ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG); |
| 120 | if (ret < 0) |
| 121 | dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label); |
| 122 | |
| 123 | val |= TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE); |
| 124 | |
| 125 | ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG); |
| 126 | if (ret < 0) |
| 127 | dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label); |
| 128 | |
| 129 | out: |
| 130 | mutex_unlock(&twl->mutex); |
| 131 | return ret; |
| 132 | } |
| 133 | |
| 134 | static void twl4030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 135 | { |
| 136 | struct twl_pwm_chip *twl = to_twl(chip); |
| 137 | int ret; |
| 138 | u8 val; |
| 139 | |
| 140 | mutex_lock(&twl->mutex); |
| 141 | ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_GPBR1_REG); |
| 142 | if (ret < 0) { |
| 143 | dev_err(chip->dev, "%s: Failed to read GPBR1\n", pwm->label); |
| 144 | goto out; |
| 145 | } |
| 146 | |
| 147 | val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMX_ENABLE); |
| 148 | |
| 149 | ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG); |
| 150 | if (ret < 0) |
| 151 | dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); |
| 152 | |
| 153 | val &= ~TWL4030_PWM_TOGGLE(pwm->hwpwm, TWL4030_PWMXCLK_ENABLE); |
| 154 | |
| 155 | ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_GPBR1_REG); |
| 156 | if (ret < 0) |
| 157 | dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); |
| 158 | |
| 159 | out: |
| 160 | mutex_unlock(&twl->mutex); |
| 161 | } |
| 162 | |
| 163 | static int twl4030_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| 164 | { |
| 165 | struct twl_pwm_chip *twl = to_twl(chip); |
| 166 | int ret; |
| 167 | u8 val, mask, bits; |
| 168 | |
| 169 | if (pwm->hwpwm == 1) { |
| 170 | mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK; |
| 171 | bits = TWL4030_GPIO7_VIBRASYNC_PWM1_PWM1; |
| 172 | } else { |
| 173 | mask = TWL4030_GPIO6_PWM0_MUTE_MASK; |
| 174 | bits = TWL4030_GPIO6_PWM0_MUTE_PWM0; |
| 175 | } |
| 176 | |
| 177 | mutex_lock(&twl->mutex); |
| 178 | ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG); |
| 179 | if (ret < 0) { |
| 180 | dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label); |
| 181 | goto out; |
| 182 | } |
| 183 | |
| 184 | /* Save the current MUX configuration for the PWM */ |
| 185 | twl->twl4030_pwm_mux &= ~mask; |
| 186 | twl->twl4030_pwm_mux |= (val & mask); |
| 187 | |
| 188 | /* Select PWM functionality */ |
| 189 | val &= ~mask; |
| 190 | val |= bits; |
| 191 | |
| 192 | ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG); |
| 193 | if (ret < 0) |
| 194 | dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label); |
| 195 | |
| 196 | out: |
| 197 | mutex_unlock(&twl->mutex); |
| 198 | return ret; |
| 199 | } |
| 200 | |
| 201 | static void twl4030_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| 202 | { |
| 203 | struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip, |
| 204 | chip); |
| 205 | int ret; |
| 206 | u8 val, mask; |
| 207 | |
| 208 | if (pwm->hwpwm == 1) |
| 209 | mask = TWL4030_GPIO7_VIBRASYNC_PWM1_MASK; |
| 210 | else |
| 211 | mask = TWL4030_GPIO6_PWM0_MUTE_MASK; |
| 212 | |
| 213 | mutex_lock(&twl->mutex); |
| 214 | ret = twl_i2c_read_u8(TWL4030_MODULE_INTBR, &val, TWL4030_PMBR1_REG); |
| 215 | if (ret < 0) { |
| 216 | dev_err(chip->dev, "%s: Failed to read PMBR1\n", pwm->label); |
| 217 | goto out; |
| 218 | } |
| 219 | |
| 220 | /* Restore the MUX configuration for the PWM */ |
| 221 | val &= ~mask; |
| 222 | val |= (twl->twl4030_pwm_mux & mask); |
| 223 | |
| 224 | ret = twl_i2c_write_u8(TWL4030_MODULE_INTBR, val, TWL4030_PMBR1_REG); |
| 225 | if (ret < 0) |
| 226 | dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label); |
| 227 | |
| 228 | out: |
| 229 | mutex_unlock(&twl->mutex); |
| 230 | } |
| 231 | |
| 232 | static int twl6030_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 233 | { |
| 234 | struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip, |
| 235 | chip); |
| 236 | int ret; |
| 237 | u8 val; |
| 238 | |
| 239 | mutex_lock(&twl->mutex); |
| 240 | val = twl->twl6030_toggle3; |
| 241 | val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN); |
| 242 | val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR); |
| 243 | |
| 244 | ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG); |
| 245 | if (ret < 0) { |
| 246 | dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label); |
| 247 | goto out; |
| 248 | } |
| 249 | |
| 250 | twl->twl6030_toggle3 = val; |
| 251 | out: |
| 252 | mutex_unlock(&twl->mutex); |
| 253 | return 0; |
| 254 | } |
| 255 | |
| 256 | static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 257 | { |
| 258 | struct twl_pwm_chip *twl = container_of(chip, struct twl_pwm_chip, |
| 259 | chip); |
| 260 | int ret; |
| 261 | u8 val; |
| 262 | |
| 263 | mutex_lock(&twl->mutex); |
| 264 | val = twl->twl6030_toggle3; |
| 265 | val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXR); |
| 266 | val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN); |
| 267 | |
| 268 | ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG); |
| 269 | if (ret < 0) { |
| 270 | dev_err(chip->dev, "%s: Failed to read TOGGLE3\n", pwm->label); |
| 271 | goto out; |
| 272 | } |
| 273 | |
| 274 | val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXS | TWL6030_PWMXEN); |
| 275 | |
| 276 | ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG); |
| 277 | if (ret < 0) { |
| 278 | dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); |
| 279 | goto out; |
| 280 | } |
| 281 | |
| 282 | twl->twl6030_toggle3 = val; |
| 283 | out: |
| 284 | mutex_unlock(&twl->mutex); |
| 285 | } |
| 286 | |
| 287 | static const struct pwm_ops twl4030_pwm_ops = { |
| 288 | .config = twl_pwm_config, |
| 289 | .enable = twl4030_pwm_enable, |
| 290 | .disable = twl4030_pwm_disable, |
| 291 | .request = twl4030_pwm_request, |
| 292 | .free = twl4030_pwm_free, |
| 293 | }; |
| 294 | |
| 295 | static const struct pwm_ops twl6030_pwm_ops = { |
| 296 | .config = twl_pwm_config, |
| 297 | .enable = twl6030_pwm_enable, |
| 298 | .disable = twl6030_pwm_disable, |
| 299 | }; |
| 300 | |
| 301 | static int twl_pwm_probe(struct platform_device *pdev) |
| 302 | { |
| 303 | struct twl_pwm_chip *twl; |
| 304 | int ret; |
| 305 | |
| 306 | twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL); |
| 307 | if (!twl) |
| 308 | return -ENOMEM; |
| 309 | |
| 310 | if (twl_class_is_4030()) |
| 311 | twl->chip.ops = &twl4030_pwm_ops; |
| 312 | else |
| 313 | twl->chip.ops = &twl6030_pwm_ops; |
| 314 | |
| 315 | twl->chip.dev = &pdev->dev; |
| 316 | twl->chip.base = -1; |
| 317 | twl->chip.npwm = 2; |
Florian Vaussard | 2e2a0f6 | 2013-01-28 15:00:58 +0100 | [diff] [blame^] | 318 | twl->chip.can_sleep = true; |
Peter Ujfalusi | 3744c26 | 2012-11-27 11:09:57 +0100 | [diff] [blame] | 319 | |
| 320 | mutex_init(&twl->mutex); |
| 321 | |
| 322 | ret = pwmchip_add(&twl->chip); |
| 323 | if (ret < 0) |
| 324 | return ret; |
| 325 | |
| 326 | platform_set_drvdata(pdev, twl); |
| 327 | |
| 328 | return 0; |
| 329 | } |
| 330 | |
| 331 | static int twl_pwm_remove(struct platform_device *pdev) |
| 332 | { |
| 333 | struct twl_pwm_chip *twl = platform_get_drvdata(pdev); |
| 334 | |
| 335 | return pwmchip_remove(&twl->chip); |
| 336 | } |
| 337 | |
| 338 | #ifdef CONFIG_OF |
| 339 | static struct of_device_id twl_pwm_of_match[] = { |
| 340 | { .compatible = "ti,twl4030-pwm" }, |
| 341 | { .compatible = "ti,twl6030-pwm" }, |
| 342 | { }, |
| 343 | }; |
| 344 | MODULE_DEVICE_TABLE(of, twl_pwm_of_match); |
| 345 | #endif |
| 346 | |
| 347 | static struct platform_driver twl_pwm_driver = { |
| 348 | .driver = { |
| 349 | .name = "twl-pwm", |
| 350 | .of_match_table = of_match_ptr(twl_pwm_of_match), |
| 351 | }, |
| 352 | .probe = twl_pwm_probe, |
| 353 | .remove = twl_pwm_remove, |
| 354 | }; |
| 355 | module_platform_driver(twl_pwm_driver); |
| 356 | |
| 357 | MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>"); |
| 358 | MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030"); |
| 359 | MODULE_ALIAS("platform:twl-pwm"); |
| 360 | MODULE_LICENSE("GPL"); |