Lennert Buytenhek | 638772c | 2009-02-11 17:25:24 +0800 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/video/pxa168fb.c -- Marvell PXA168 LCD Controller |
| 3 | * |
| 4 | * Copyright (C) 2008 Marvell International Ltd. |
| 5 | * All rights reserved. |
| 6 | * |
| 7 | * 2009-02-16 adapted from original version for PXA168/910 |
| 8 | * Jun Nie <njun@marvell.com> |
| 9 | * |
| 10 | * This file is subject to the terms and conditions of the GNU General Public |
| 11 | * License. See the file COPYING in the main directory of this archive for |
| 12 | * more details. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/kernel.h> |
| 17 | #include <linux/sched.h> |
| 18 | #include <linux/string.h> |
| 19 | #include <linux/interrupt.h> |
| 20 | #include <linux/slab.h> |
| 21 | #include <linux/fb.h> |
| 22 | #include <linux/delay.h> |
| 23 | #include <linux/init.h> |
| 24 | #include <linux/ioport.h> |
| 25 | #include <linux/platform_device.h> |
| 26 | #include <linux/dma-mapping.h> |
| 27 | #include <linux/clk.h> |
| 28 | #include <linux/err.h> |
| 29 | #include <linux/uaccess.h> |
| 30 | #include <video/pxa168fb.h> |
| 31 | |
| 32 | #include "pxa168fb.h" |
| 33 | |
| 34 | #define DEFAULT_REFRESH 60 /* Hz */ |
| 35 | |
| 36 | static int determine_best_pix_fmt(struct fb_var_screeninfo *var) |
| 37 | { |
| 38 | /* |
| 39 | * Pseudocolor mode? |
| 40 | */ |
| 41 | if (var->bits_per_pixel == 8) |
| 42 | return PIX_FMT_PSEUDOCOLOR; |
| 43 | |
| 44 | /* |
| 45 | * Check for 565/1555. |
| 46 | */ |
| 47 | if (var->bits_per_pixel == 16 && var->red.length <= 5 && |
| 48 | var->green.length <= 6 && var->blue.length <= 5) { |
| 49 | if (var->transp.length == 0) { |
| 50 | if (var->red.offset >= var->blue.offset) |
| 51 | return PIX_FMT_RGB565; |
| 52 | else |
| 53 | return PIX_FMT_BGR565; |
| 54 | } |
| 55 | |
| 56 | if (var->transp.length == 1 && var->green.length <= 5) { |
| 57 | if (var->red.offset >= var->blue.offset) |
| 58 | return PIX_FMT_RGB1555; |
| 59 | else |
| 60 | return PIX_FMT_BGR1555; |
| 61 | } |
| 62 | |
| 63 | /* fall through */ |
| 64 | } |
| 65 | |
| 66 | /* |
| 67 | * Check for 888/A888. |
| 68 | */ |
| 69 | if (var->bits_per_pixel <= 32 && var->red.length <= 8 && |
| 70 | var->green.length <= 8 && var->blue.length <= 8) { |
| 71 | if (var->bits_per_pixel == 24 && var->transp.length == 0) { |
| 72 | if (var->red.offset >= var->blue.offset) |
| 73 | return PIX_FMT_RGB888PACK; |
| 74 | else |
| 75 | return PIX_FMT_BGR888PACK; |
| 76 | } |
| 77 | |
| 78 | if (var->bits_per_pixel == 32 && var->transp.length == 8) { |
| 79 | if (var->red.offset >= var->blue.offset) |
| 80 | return PIX_FMT_RGBA888; |
| 81 | else |
| 82 | return PIX_FMT_BGRA888; |
| 83 | } else { |
| 84 | if (var->red.offset >= var->blue.offset) |
| 85 | return PIX_FMT_RGB888UNPACK; |
| 86 | else |
| 87 | return PIX_FMT_BGR888UNPACK; |
| 88 | } |
| 89 | |
| 90 | /* fall through */ |
| 91 | } |
| 92 | |
| 93 | return -EINVAL; |
| 94 | } |
| 95 | |
| 96 | static void set_pix_fmt(struct fb_var_screeninfo *var, int pix_fmt) |
| 97 | { |
| 98 | switch (pix_fmt) { |
| 99 | case PIX_FMT_RGB565: |
| 100 | var->bits_per_pixel = 16; |
| 101 | var->red.offset = 11; var->red.length = 5; |
| 102 | var->green.offset = 5; var->green.length = 6; |
| 103 | var->blue.offset = 0; var->blue.length = 5; |
| 104 | var->transp.offset = 0; var->transp.length = 0; |
| 105 | break; |
| 106 | case PIX_FMT_BGR565: |
| 107 | var->bits_per_pixel = 16; |
| 108 | var->red.offset = 0; var->red.length = 5; |
| 109 | var->green.offset = 5; var->green.length = 6; |
| 110 | var->blue.offset = 11; var->blue.length = 5; |
| 111 | var->transp.offset = 0; var->transp.length = 0; |
| 112 | break; |
| 113 | case PIX_FMT_RGB1555: |
| 114 | var->bits_per_pixel = 16; |
| 115 | var->red.offset = 10; var->red.length = 5; |
| 116 | var->green.offset = 5; var->green.length = 5; |
| 117 | var->blue.offset = 0; var->blue.length = 5; |
| 118 | var->transp.offset = 15; var->transp.length = 1; |
| 119 | break; |
| 120 | case PIX_FMT_BGR1555: |
| 121 | var->bits_per_pixel = 16; |
| 122 | var->red.offset = 0; var->red.length = 5; |
| 123 | var->green.offset = 5; var->green.length = 5; |
| 124 | var->blue.offset = 10; var->blue.length = 5; |
| 125 | var->transp.offset = 15; var->transp.length = 1; |
| 126 | break; |
| 127 | case PIX_FMT_RGB888PACK: |
| 128 | var->bits_per_pixel = 24; |
| 129 | var->red.offset = 16; var->red.length = 8; |
| 130 | var->green.offset = 8; var->green.length = 8; |
| 131 | var->blue.offset = 0; var->blue.length = 8; |
| 132 | var->transp.offset = 0; var->transp.length = 0; |
| 133 | break; |
| 134 | case PIX_FMT_BGR888PACK: |
| 135 | var->bits_per_pixel = 24; |
| 136 | var->red.offset = 0; var->red.length = 8; |
| 137 | var->green.offset = 8; var->green.length = 8; |
| 138 | var->blue.offset = 16; var->blue.length = 8; |
| 139 | var->transp.offset = 0; var->transp.length = 0; |
| 140 | break; |
| 141 | case PIX_FMT_RGBA888: |
| 142 | var->bits_per_pixel = 32; |
| 143 | var->red.offset = 16; var->red.length = 8; |
| 144 | var->green.offset = 8; var->green.length = 8; |
| 145 | var->blue.offset = 0; var->blue.length = 8; |
| 146 | var->transp.offset = 24; var->transp.length = 8; |
| 147 | break; |
| 148 | case PIX_FMT_BGRA888: |
| 149 | var->bits_per_pixel = 32; |
| 150 | var->red.offset = 0; var->red.length = 8; |
| 151 | var->green.offset = 8; var->green.length = 8; |
| 152 | var->blue.offset = 16; var->blue.length = 8; |
| 153 | var->transp.offset = 24; var->transp.length = 8; |
| 154 | break; |
| 155 | case PIX_FMT_PSEUDOCOLOR: |
| 156 | var->bits_per_pixel = 8; |
| 157 | var->red.offset = 0; var->red.length = 8; |
| 158 | var->green.offset = 0; var->green.length = 8; |
| 159 | var->blue.offset = 0; var->blue.length = 8; |
| 160 | var->transp.offset = 0; var->transp.length = 0; |
| 161 | break; |
| 162 | } |
| 163 | } |
| 164 | |
| 165 | static void set_mode(struct pxa168fb_info *fbi, struct fb_var_screeninfo *var, |
| 166 | struct fb_videomode *mode, int pix_fmt, int ystretch) |
| 167 | { |
| 168 | struct fb_info *info = fbi->info; |
| 169 | |
| 170 | set_pix_fmt(var, pix_fmt); |
| 171 | |
| 172 | var->xres = mode->xres; |
| 173 | var->yres = mode->yres; |
| 174 | var->xres_virtual = max(var->xres, var->xres_virtual); |
| 175 | if (ystretch) |
| 176 | var->yres_virtual = info->fix.smem_len / |
| 177 | (var->xres_virtual * (var->bits_per_pixel >> 3)); |
| 178 | else |
| 179 | var->yres_virtual = max(var->yres, var->yres_virtual); |
| 180 | var->grayscale = 0; |
| 181 | var->accel_flags = FB_ACCEL_NONE; |
| 182 | var->pixclock = mode->pixclock; |
| 183 | var->left_margin = mode->left_margin; |
| 184 | var->right_margin = mode->right_margin; |
| 185 | var->upper_margin = mode->upper_margin; |
| 186 | var->lower_margin = mode->lower_margin; |
| 187 | var->hsync_len = mode->hsync_len; |
| 188 | var->vsync_len = mode->vsync_len; |
| 189 | var->sync = mode->sync; |
| 190 | var->vmode = FB_VMODE_NONINTERLACED; |
| 191 | var->rotate = FB_ROTATE_UR; |
| 192 | } |
| 193 | |
| 194 | static int pxa168fb_check_var(struct fb_var_screeninfo *var, |
| 195 | struct fb_info *info) |
| 196 | { |
| 197 | struct pxa168fb_info *fbi = info->par; |
| 198 | int pix_fmt; |
| 199 | |
| 200 | /* |
| 201 | * Determine which pixel format we're going to use. |
| 202 | */ |
| 203 | pix_fmt = determine_best_pix_fmt(var); |
| 204 | if (pix_fmt < 0) |
| 205 | return pix_fmt; |
| 206 | set_pix_fmt(var, pix_fmt); |
| 207 | fbi->pix_fmt = pix_fmt; |
| 208 | |
| 209 | /* |
| 210 | * Basic geometry sanity checks. |
| 211 | */ |
| 212 | if (var->xoffset + var->xres > var->xres_virtual) |
| 213 | return -EINVAL; |
| 214 | if (var->yoffset + var->yres > var->yres_virtual) |
| 215 | return -EINVAL; |
| 216 | if (var->xres + var->right_margin + |
| 217 | var->hsync_len + var->left_margin > 2048) |
| 218 | return -EINVAL; |
| 219 | if (var->yres + var->lower_margin + |
| 220 | var->vsync_len + var->upper_margin > 2048) |
| 221 | return -EINVAL; |
| 222 | |
| 223 | /* |
| 224 | * Check size of framebuffer. |
| 225 | */ |
| 226 | if (var->xres_virtual * var->yres_virtual * |
| 227 | (var->bits_per_pixel >> 3) > info->fix.smem_len) |
| 228 | return -EINVAL; |
| 229 | |
| 230 | return 0; |
| 231 | } |
| 232 | |
| 233 | /* |
| 234 | * The hardware clock divider has an integer and a fractional |
| 235 | * stage: |
| 236 | * |
| 237 | * clk2 = clk_in / integer_divider |
| 238 | * clk_out = clk2 * (1 - (fractional_divider >> 12)) |
| 239 | * |
| 240 | * Calculate integer and fractional divider for given clk_in |
| 241 | * and clk_out. |
| 242 | */ |
| 243 | static void set_clock_divider(struct pxa168fb_info *fbi, |
| 244 | const struct fb_videomode *m) |
| 245 | { |
| 246 | int divider_int; |
| 247 | int needed_pixclk; |
| 248 | u64 div_result; |
| 249 | u32 x = 0; |
| 250 | |
| 251 | /* |
| 252 | * Notice: The field pixclock is used by linux fb |
| 253 | * is in pixel second. E.g. struct fb_videomode & |
| 254 | * struct fb_var_screeninfo |
| 255 | */ |
| 256 | |
| 257 | /* |
| 258 | * Check input values. |
| 259 | */ |
| 260 | if (!m || !m->pixclock || !m->refresh) { |
| 261 | dev_err(fbi->dev, "Input refresh or pixclock is wrong.\n"); |
| 262 | return; |
| 263 | } |
| 264 | |
| 265 | /* |
| 266 | * Using PLL/AXI clock. |
| 267 | */ |
| 268 | x = 0x80000000; |
| 269 | |
| 270 | /* |
| 271 | * Calc divider according to refresh rate. |
| 272 | */ |
| 273 | div_result = 1000000000000ll; |
| 274 | do_div(div_result, m->pixclock); |
| 275 | needed_pixclk = (u32)div_result; |
| 276 | |
| 277 | divider_int = clk_get_rate(fbi->clk) / needed_pixclk; |
| 278 | |
| 279 | /* check whether divisor is too small. */ |
| 280 | if (divider_int < 2) { |
| 281 | dev_warn(fbi->dev, "Warning: clock source is too slow." |
| 282 | "Try smaller resolution\n"); |
| 283 | divider_int = 2; |
| 284 | } |
| 285 | |
| 286 | /* |
| 287 | * Set setting to reg. |
| 288 | */ |
| 289 | x |= divider_int; |
| 290 | writel(x, fbi->reg_base + LCD_CFG_SCLK_DIV); |
| 291 | } |
| 292 | |
| 293 | static void set_dma_control0(struct pxa168fb_info *fbi) |
| 294 | { |
| 295 | u32 x; |
| 296 | |
| 297 | /* |
| 298 | * Set bit to enable graphics DMA. |
| 299 | */ |
| 300 | x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0); |
| 301 | x |= fbi->active ? 0x00000100 : 0; |
| 302 | fbi->active = 0; |
| 303 | |
| 304 | /* |
| 305 | * If we are in a pseudo-color mode, we need to enable |
| 306 | * palette lookup. |
| 307 | */ |
| 308 | if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR) |
| 309 | x |= 0x10000000; |
| 310 | |
| 311 | /* |
| 312 | * Configure hardware pixel format. |
| 313 | */ |
| 314 | x &= ~(0xF << 16); |
| 315 | x |= (fbi->pix_fmt >> 1) << 16; |
| 316 | |
| 317 | /* |
| 318 | * Check red and blue pixel swap. |
| 319 | * 1. source data swap |
| 320 | * 2. panel output data swap |
| 321 | */ |
| 322 | x &= ~(1 << 12); |
| 323 | x |= ((fbi->pix_fmt & 1) ^ (fbi->panel_rbswap)) << 12; |
| 324 | |
| 325 | writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL0); |
| 326 | } |
| 327 | |
| 328 | static void set_dma_control1(struct pxa168fb_info *fbi, int sync) |
| 329 | { |
| 330 | u32 x; |
| 331 | |
| 332 | /* |
| 333 | * Configure default bits: vsync triggers DMA, gated clock |
| 334 | * enable, power save enable, configure alpha registers to |
| 335 | * display 100% graphics, and set pixel command. |
| 336 | */ |
| 337 | x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL1); |
| 338 | x |= 0x2032ff81; |
| 339 | |
| 340 | /* |
| 341 | * We trigger DMA on the falling edge of vsync if vsync is |
| 342 | * active low, or on the rising edge if vsync is active high. |
| 343 | */ |
| 344 | if (!(sync & FB_SYNC_VERT_HIGH_ACT)) |
| 345 | x |= 0x08000000; |
| 346 | |
| 347 | writel(x, fbi->reg_base + LCD_SPU_DMA_CTRL1); |
| 348 | } |
| 349 | |
| 350 | static void set_graphics_start(struct fb_info *info, int xoffset, int yoffset) |
| 351 | { |
| 352 | struct pxa168fb_info *fbi = info->par; |
| 353 | struct fb_var_screeninfo *var = &info->var; |
| 354 | int pixel_offset; |
| 355 | unsigned long addr; |
| 356 | |
| 357 | pixel_offset = (yoffset * var->xres_virtual) + xoffset; |
| 358 | |
| 359 | addr = fbi->fb_start_dma + (pixel_offset * (var->bits_per_pixel >> 3)); |
| 360 | writel(addr, fbi->reg_base + LCD_CFG_GRA_START_ADDR0); |
| 361 | } |
| 362 | |
| 363 | static void set_dumb_panel_control(struct fb_info *info) |
| 364 | { |
| 365 | struct pxa168fb_info *fbi = info->par; |
| 366 | struct pxa168fb_mach_info *mi = fbi->dev->platform_data; |
| 367 | u32 x; |
| 368 | |
| 369 | /* |
| 370 | * Preserve enable flag. |
| 371 | */ |
| 372 | x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL) & 0x00000001; |
| 373 | |
| 374 | x |= (fbi->is_blanked ? 0x7 : mi->dumb_mode) << 28; |
| 375 | x |= mi->gpio_output_data << 20; |
| 376 | x |= mi->gpio_output_mask << 12; |
| 377 | x |= mi->panel_rgb_reverse_lanes ? 0x00000080 : 0; |
| 378 | x |= mi->invert_composite_blank ? 0x00000040 : 0; |
| 379 | x |= (info->var.sync & FB_SYNC_COMP_HIGH_ACT) ? 0x00000020 : 0; |
| 380 | x |= mi->invert_pix_val_ena ? 0x00000010 : 0; |
| 381 | x |= (info->var.sync & FB_SYNC_VERT_HIGH_ACT) ? 0 : 0x00000008; |
| 382 | x |= (info->var.sync & FB_SYNC_HOR_HIGH_ACT) ? 0 : 0x00000004; |
| 383 | x |= mi->invert_pixclock ? 0x00000002 : 0; |
| 384 | |
| 385 | writel(x, fbi->reg_base + LCD_SPU_DUMB_CTRL); |
| 386 | } |
| 387 | |
| 388 | static void set_dumb_screen_dimensions(struct fb_info *info) |
| 389 | { |
| 390 | struct pxa168fb_info *fbi = info->par; |
| 391 | struct fb_var_screeninfo *v = &info->var; |
| 392 | int x; |
| 393 | int y; |
| 394 | |
| 395 | x = v->xres + v->right_margin + v->hsync_len + v->left_margin; |
| 396 | y = v->yres + v->lower_margin + v->vsync_len + v->upper_margin; |
| 397 | |
| 398 | writel((y << 16) | x, fbi->reg_base + LCD_SPUT_V_H_TOTAL); |
| 399 | } |
| 400 | |
| 401 | static int pxa168fb_set_par(struct fb_info *info) |
| 402 | { |
| 403 | struct pxa168fb_info *fbi = info->par; |
| 404 | struct fb_var_screeninfo *var = &info->var; |
| 405 | struct fb_videomode mode; |
| 406 | u32 x; |
| 407 | struct pxa168fb_mach_info *mi; |
| 408 | |
| 409 | mi = fbi->dev->platform_data; |
| 410 | |
| 411 | /* |
| 412 | * Set additional mode info. |
| 413 | */ |
| 414 | if (fbi->pix_fmt == PIX_FMT_PSEUDOCOLOR) |
| 415 | info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| 416 | else |
| 417 | info->fix.visual = FB_VISUAL_TRUECOLOR; |
| 418 | info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; |
| 419 | info->fix.ypanstep = var->yres; |
| 420 | |
| 421 | /* |
| 422 | * Disable panel output while we setup the display. |
| 423 | */ |
| 424 | x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL); |
| 425 | writel(x & ~1, fbi->reg_base + LCD_SPU_DUMB_CTRL); |
| 426 | |
| 427 | /* |
| 428 | * Configure global panel parameters. |
| 429 | */ |
| 430 | writel((var->yres << 16) | var->xres, |
| 431 | fbi->reg_base + LCD_SPU_V_H_ACTIVE); |
| 432 | |
| 433 | /* |
| 434 | * convet var to video mode |
| 435 | */ |
| 436 | fb_var_to_videomode(&mode, &info->var); |
| 437 | |
| 438 | /* Calculate clock divisor. */ |
| 439 | set_clock_divider(fbi, &mode); |
| 440 | |
| 441 | /* Configure dma ctrl regs. */ |
| 442 | set_dma_control0(fbi); |
| 443 | set_dma_control1(fbi, info->var.sync); |
| 444 | |
| 445 | /* |
| 446 | * Configure graphics DMA parameters. |
| 447 | */ |
| 448 | x = readl(fbi->reg_base + LCD_CFG_GRA_PITCH); |
| 449 | x = (x & ~0xFFFF) | ((var->xres_virtual * var->bits_per_pixel) >> 3); |
| 450 | writel(x, fbi->reg_base + LCD_CFG_GRA_PITCH); |
| 451 | writel((var->yres << 16) | var->xres, |
| 452 | fbi->reg_base + LCD_SPU_GRA_HPXL_VLN); |
| 453 | writel((var->yres << 16) | var->xres, |
| 454 | fbi->reg_base + LCD_SPU_GZM_HPXL_VLN); |
| 455 | |
| 456 | /* |
| 457 | * Configure dumb panel ctrl regs & timings. |
| 458 | */ |
| 459 | set_dumb_panel_control(info); |
| 460 | set_dumb_screen_dimensions(info); |
| 461 | |
| 462 | writel((var->left_margin << 16) | var->right_margin, |
| 463 | fbi->reg_base + LCD_SPU_H_PORCH); |
| 464 | writel((var->upper_margin << 16) | var->lower_margin, |
| 465 | fbi->reg_base + LCD_SPU_V_PORCH); |
| 466 | |
| 467 | /* |
| 468 | * Re-enable panel output. |
| 469 | */ |
| 470 | x = readl(fbi->reg_base + LCD_SPU_DUMB_CTRL); |
| 471 | writel(x | 1, fbi->reg_base + LCD_SPU_DUMB_CTRL); |
| 472 | |
| 473 | return 0; |
| 474 | } |
| 475 | |
| 476 | static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf) |
| 477 | { |
| 478 | return ((chan & 0xffff) >> (16 - bf->length)) << bf->offset; |
| 479 | } |
| 480 | |
| 481 | static u32 to_rgb(u16 red, u16 green, u16 blue) |
| 482 | { |
| 483 | red >>= 8; |
| 484 | green >>= 8; |
| 485 | blue >>= 8; |
| 486 | |
| 487 | return (red << 16) | (green << 8) | blue; |
| 488 | } |
| 489 | |
| 490 | static int |
| 491 | pxa168fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, |
| 492 | unsigned int blue, unsigned int trans, struct fb_info *info) |
| 493 | { |
| 494 | struct pxa168fb_info *fbi = info->par; |
| 495 | u32 val; |
| 496 | |
| 497 | if (info->var.grayscale) |
| 498 | red = green = blue = (19595 * red + 38470 * green + |
| 499 | 7471 * blue) >> 16; |
| 500 | |
| 501 | if (info->fix.visual == FB_VISUAL_TRUECOLOR && regno < 16) { |
| 502 | val = chan_to_field(red, &info->var.red); |
| 503 | val |= chan_to_field(green, &info->var.green); |
| 504 | val |= chan_to_field(blue , &info->var.blue); |
| 505 | fbi->pseudo_palette[regno] = val; |
| 506 | } |
| 507 | |
| 508 | if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) { |
| 509 | val = to_rgb(red, green, blue); |
| 510 | writel(val, fbi->reg_base + LCD_SPU_SRAM_WRDAT); |
| 511 | writel(0x8300 | regno, fbi->reg_base + LCD_SPU_SRAM_CTRL); |
| 512 | } |
| 513 | |
| 514 | return 0; |
| 515 | } |
| 516 | |
| 517 | static int pxa168fb_blank(int blank, struct fb_info *info) |
| 518 | { |
| 519 | struct pxa168fb_info *fbi = info->par; |
| 520 | |
| 521 | fbi->is_blanked = (blank == FB_BLANK_UNBLANK) ? 0 : 1; |
| 522 | set_dumb_panel_control(info); |
| 523 | |
| 524 | return 0; |
| 525 | } |
| 526 | |
| 527 | static int pxa168fb_pan_display(struct fb_var_screeninfo *var, |
| 528 | struct fb_info *info) |
| 529 | { |
| 530 | set_graphics_start(info, var->xoffset, var->yoffset); |
| 531 | |
| 532 | return 0; |
| 533 | } |
| 534 | |
| 535 | static irqreturn_t pxa168fb_handle_irq(int irq, void *dev_id) |
| 536 | { |
| 537 | struct pxa168fb_info *fbi = dev_id; |
| 538 | u32 isr = readl(fbi->reg_base + SPU_IRQ_ISR); |
| 539 | |
| 540 | if ((isr & GRA_FRAME_IRQ0_ENA_MASK)) { |
| 541 | |
| 542 | writel(isr & (~GRA_FRAME_IRQ0_ENA_MASK), |
| 543 | fbi->reg_base + SPU_IRQ_ISR); |
| 544 | |
| 545 | return IRQ_HANDLED; |
| 546 | } |
| 547 | return IRQ_NONE; |
| 548 | } |
| 549 | |
| 550 | static struct fb_ops pxa168fb_ops = { |
| 551 | .owner = THIS_MODULE, |
| 552 | .fb_check_var = pxa168fb_check_var, |
| 553 | .fb_set_par = pxa168fb_set_par, |
| 554 | .fb_setcolreg = pxa168fb_setcolreg, |
| 555 | .fb_blank = pxa168fb_blank, |
| 556 | .fb_pan_display = pxa168fb_pan_display, |
| 557 | .fb_fillrect = cfb_fillrect, |
| 558 | .fb_copyarea = cfb_copyarea, |
| 559 | .fb_imageblit = cfb_imageblit, |
| 560 | }; |
| 561 | |
| 562 | static int __init pxa168fb_init_mode(struct fb_info *info, |
| 563 | struct pxa168fb_mach_info *mi) |
| 564 | { |
| 565 | struct pxa168fb_info *fbi = info->par; |
| 566 | struct fb_var_screeninfo *var = &info->var; |
| 567 | int ret = 0; |
| 568 | u32 total_w, total_h, refresh; |
| 569 | u64 div_result; |
| 570 | const struct fb_videomode *m; |
| 571 | |
| 572 | /* |
| 573 | * Set default value |
| 574 | */ |
| 575 | refresh = DEFAULT_REFRESH; |
| 576 | |
| 577 | /* try to find best video mode. */ |
| 578 | m = fb_find_best_mode(&info->var, &info->modelist); |
| 579 | if (m) |
| 580 | fb_videomode_to_var(&info->var, m); |
| 581 | |
| 582 | /* Init settings. */ |
| 583 | var->xres_virtual = var->xres; |
| 584 | var->yres_virtual = info->fix.smem_len / |
| 585 | (var->xres_virtual * (var->bits_per_pixel >> 3)); |
| 586 | dev_dbg(fbi->dev, "pxa168fb: find best mode: res = %dx%d\n", |
| 587 | var->xres, var->yres); |
| 588 | |
| 589 | /* correct pixclock. */ |
| 590 | total_w = var->xres + var->left_margin + var->right_margin + |
| 591 | var->hsync_len; |
| 592 | total_h = var->yres + var->upper_margin + var->lower_margin + |
| 593 | var->vsync_len; |
| 594 | |
| 595 | div_result = 1000000000000ll; |
| 596 | do_div(div_result, total_w * total_h * refresh); |
| 597 | var->pixclock = (u32)div_result; |
| 598 | |
| 599 | return ret; |
| 600 | } |
| 601 | |
| 602 | static int __init pxa168fb_probe(struct platform_device *pdev) |
| 603 | { |
| 604 | struct pxa168fb_mach_info *mi; |
| 605 | struct fb_info *info = 0; |
| 606 | struct pxa168fb_info *fbi = 0; |
| 607 | struct resource *res; |
| 608 | struct clk *clk; |
| 609 | int irq, ret; |
| 610 | |
| 611 | mi = pdev->dev.platform_data; |
| 612 | if (mi == NULL) { |
| 613 | dev_err(&pdev->dev, "no platform data defined\n"); |
| 614 | return -EINVAL; |
| 615 | } |
| 616 | |
| 617 | clk = clk_get(&pdev->dev, "LCDCLK"); |
| 618 | if (IS_ERR(clk)) { |
| 619 | dev_err(&pdev->dev, "unable to get LCDCLK"); |
| 620 | return PTR_ERR(clk); |
| 621 | } |
| 622 | |
| 623 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 624 | if (res == NULL) { |
| 625 | dev_err(&pdev->dev, "no IO memory defined\n"); |
| 626 | return -ENOENT; |
| 627 | } |
| 628 | |
| 629 | irq = platform_get_irq(pdev, 0); |
| 630 | if (irq < 0) { |
| 631 | dev_err(&pdev->dev, "no IRQ defined\n"); |
| 632 | return -ENOENT; |
| 633 | } |
| 634 | |
| 635 | info = framebuffer_alloc(sizeof(struct pxa168fb_info), &pdev->dev); |
| 636 | if (info == NULL) { |
| 637 | clk_put(clk); |
| 638 | return -ENOMEM; |
| 639 | } |
| 640 | |
| 641 | /* Initialize private data */ |
| 642 | fbi = info->par; |
| 643 | fbi->info = info; |
| 644 | fbi->clk = clk; |
| 645 | fbi->dev = info->dev = &pdev->dev; |
| 646 | fbi->panel_rbswap = mi->panel_rbswap; |
| 647 | fbi->is_blanked = 0; |
| 648 | fbi->active = mi->active; |
| 649 | |
| 650 | /* |
| 651 | * Initialise static fb parameters. |
| 652 | */ |
| 653 | info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK | |
| 654 | FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN; |
| 655 | info->node = -1; |
| 656 | strlcpy(info->fix.id, mi->id, 16); |
| 657 | info->fix.type = FB_TYPE_PACKED_PIXELS; |
| 658 | info->fix.type_aux = 0; |
| 659 | info->fix.xpanstep = 0; |
| 660 | info->fix.ypanstep = 0; |
| 661 | info->fix.ywrapstep = 0; |
| 662 | info->fix.mmio_start = res->start; |
| 663 | info->fix.mmio_len = res->end - res->start + 1; |
| 664 | info->fix.accel = FB_ACCEL_NONE; |
| 665 | info->fbops = &pxa168fb_ops; |
| 666 | info->pseudo_palette = fbi->pseudo_palette; |
| 667 | |
| 668 | /* |
| 669 | * Map LCD controller registers. |
| 670 | */ |
Dan Carpenter | e3396b2 | 2010-03-22 15:10:35 +0300 | [diff] [blame] | 671 | fbi->reg_base = ioremap_nocache(res->start, resource_size(res)); |
Lennert Buytenhek | 638772c | 2009-02-11 17:25:24 +0800 | [diff] [blame] | 672 | if (fbi->reg_base == NULL) { |
| 673 | ret = -ENOMEM; |
| 674 | goto failed; |
| 675 | } |
| 676 | |
| 677 | /* |
| 678 | * Allocate framebuffer memory. |
| 679 | */ |
| 680 | info->fix.smem_len = PAGE_ALIGN(DEFAULT_FB_SIZE); |
| 681 | |
| 682 | info->screen_base = dma_alloc_writecombine(fbi->dev, info->fix.smem_len, |
| 683 | &fbi->fb_start_dma, GFP_KERNEL); |
| 684 | if (info->screen_base == NULL) { |
| 685 | ret = -ENOMEM; |
| 686 | goto failed; |
| 687 | } |
| 688 | |
| 689 | info->fix.smem_start = (unsigned long)fbi->fb_start_dma; |
Jun Nie | a291ea2 | 2009-11-10 09:33:49 +0800 | [diff] [blame] | 690 | set_graphics_start(info, 0, 0); |
Lennert Buytenhek | 638772c | 2009-02-11 17:25:24 +0800 | [diff] [blame] | 691 | |
| 692 | /* |
| 693 | * Set video mode according to platform data. |
| 694 | */ |
| 695 | set_mode(fbi, &info->var, mi->modes, mi->pix_fmt, 1); |
| 696 | |
| 697 | fb_videomode_to_modelist(mi->modes, mi->num_modes, &info->modelist); |
| 698 | |
| 699 | /* |
| 700 | * init video mode data. |
| 701 | */ |
| 702 | pxa168fb_init_mode(info, mi); |
| 703 | |
| 704 | ret = pxa168fb_check_var(&info->var, info); |
| 705 | if (ret) |
| 706 | goto failed_free_fbmem; |
| 707 | |
| 708 | /* |
| 709 | * Fill in sane defaults. |
| 710 | */ |
| 711 | ret = pxa168fb_check_var(&info->var, info); |
| 712 | if (ret) |
| 713 | goto failed; |
| 714 | |
| 715 | /* |
| 716 | * enable controller clock |
| 717 | */ |
| 718 | clk_enable(fbi->clk); |
| 719 | |
| 720 | pxa168fb_set_par(info); |
| 721 | |
| 722 | /* |
| 723 | * Configure default register values. |
| 724 | */ |
| 725 | writel(0, fbi->reg_base + LCD_SPU_BLANKCOLOR); |
| 726 | writel(mi->io_pin_allocation_mode, fbi->reg_base + SPU_IOPAD_CONTROL); |
| 727 | writel(0, fbi->reg_base + LCD_CFG_GRA_START_ADDR1); |
| 728 | writel(0, fbi->reg_base + LCD_SPU_GRA_OVSA_HPXL_VLN); |
| 729 | writel(0, fbi->reg_base + LCD_SPU_SRAM_PARA0); |
| 730 | writel(CFG_CSB_256x32(0x1)|CFG_CSB_256x24(0x1)|CFG_CSB_256x8(0x1), |
| 731 | fbi->reg_base + LCD_SPU_SRAM_PARA1); |
| 732 | |
| 733 | /* |
| 734 | * Allocate color map. |
| 735 | */ |
| 736 | if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { |
| 737 | ret = -ENOMEM; |
| 738 | goto failed_free_clk; |
| 739 | } |
| 740 | |
| 741 | /* |
| 742 | * Register irq handler. |
| 743 | */ |
| 744 | ret = request_irq(irq, pxa168fb_handle_irq, IRQF_SHARED, |
| 745 | info->fix.id, fbi); |
| 746 | if (ret < 0) { |
| 747 | dev_err(&pdev->dev, "unable to request IRQ\n"); |
| 748 | ret = -ENXIO; |
| 749 | goto failed_free_cmap; |
| 750 | } |
| 751 | |
| 752 | /* |
| 753 | * Enable GFX interrupt |
| 754 | */ |
| 755 | writel(GRA_FRAME_IRQ0_ENA(0x1), fbi->reg_base + SPU_IRQ_ENA); |
| 756 | |
| 757 | /* |
| 758 | * Register framebuffer. |
| 759 | */ |
| 760 | ret = register_framebuffer(info); |
| 761 | if (ret < 0) { |
| 762 | dev_err(&pdev->dev, "Failed to register pxa168-fb: %d\n", ret); |
| 763 | ret = -ENXIO; |
| 764 | goto failed_free_irq; |
| 765 | } |
| 766 | |
| 767 | platform_set_drvdata(pdev, fbi); |
| 768 | return 0; |
| 769 | |
| 770 | failed_free_irq: |
| 771 | free_irq(irq, fbi); |
| 772 | failed_free_cmap: |
| 773 | fb_dealloc_cmap(&info->cmap); |
| 774 | failed_free_clk: |
| 775 | clk_disable(fbi->clk); |
| 776 | failed_free_fbmem: |
| 777 | dma_free_coherent(fbi->dev, info->fix.smem_len, |
| 778 | info->screen_base, fbi->fb_start_dma); |
| 779 | failed: |
| 780 | kfree(info); |
| 781 | clk_put(clk); |
| 782 | |
| 783 | dev_err(&pdev->dev, "frame buffer device init failed with %d\n", ret); |
| 784 | return ret; |
| 785 | } |
| 786 | |
| 787 | static struct platform_driver pxa168fb_driver = { |
| 788 | .driver = { |
| 789 | .name = "pxa168-fb", |
| 790 | .owner = THIS_MODULE, |
| 791 | }, |
| 792 | .probe = pxa168fb_probe, |
| 793 | }; |
| 794 | |
| 795 | static int __devinit pxa168fb_init(void) |
| 796 | { |
| 797 | return platform_driver_register(&pxa168fb_driver); |
| 798 | } |
| 799 | module_init(pxa168fb_init); |
| 800 | |
| 801 | MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com> " |
| 802 | "Green Wan <gwan@marvell.com>"); |
| 803 | MODULE_DESCRIPTION("Framebuffer driver for PXA168/910"); |
| 804 | MODULE_LICENSE("GPL"); |