blob: 1547d8cac5fb96fcae8f87b0085a63c277eb1320 [file] [log] [blame]
Oliver Bock9189bfc2006-06-22 19:04:47 +02001/*
2* cypress_cy7c63.c
3*
Oliver Bockd09d6a32007-11-12 00:42:16 +01004* Copyright (c) 2006-2007 Oliver Bock (bock@tfh-berlin.de)
Oliver Bock9189bfc2006-06-22 19:04:47 +02005*
6* This driver is based on the Cypress USB Driver by Marcus Maul
7* (cyport) and the 2.0 version of Greg Kroah-Hartman's
8* USB Skeleton driver.
9*
10* This is a generic driver for the Cypress CY7C63xxx family.
11* For the time being it enables you to read from and write to
12* the single I/O ports of the device.
13*
14* Supported vendors: AK Modul-Bus Computer GmbH
Oliver Bock6ad576b2006-07-27 21:34:58 +020015* (Firmware "Port-Chip")
16*
17* Supported devices: CY7C63001A-PC
18* CY7C63001C-PXC
19* CY7C63001C-SXC
20*
21* Supported functions: Read/Write Ports
Oliver Bock9189bfc2006-06-22 19:04:47 +020022*
23*
Oliver Bockd09d6a32007-11-12 00:42:16 +010024* For up-to-date information please visit:
25* http://www.obock.de/kernel/cypress
26*
Oliver Bock9189bfc2006-06-22 19:04:47 +020027* This program is free software; you can redistribute it and/or
28* modify it under the terms of the GNU General Public License as
29* published by the Free Software Foundation, version 2.
30*/
31
32#include <linux/init.h>
33#include <linux/module.h>
34#include <linux/kernel.h>
35#include <linux/usb.h>
36
Oliver Bockd09d6a32007-11-12 00:42:16 +010037#define DRIVER_AUTHOR "Oliver Bock (bock@tfh-berlin.de)"
Oliver Bock9189bfc2006-06-22 19:04:47 +020038#define DRIVER_DESC "Cypress CY7C63xxx USB driver"
39
40#define CYPRESS_VENDOR_ID 0xa2c
41#define CYPRESS_PRODUCT_ID 0x8
42
43#define CYPRESS_READ_PORT 0x4
44#define CYPRESS_WRITE_PORT 0x5
45
46#define CYPRESS_READ_RAM 0x2
47#define CYPRESS_WRITE_RAM 0x3
48#define CYPRESS_READ_ROM 0x1
49
50#define CYPRESS_READ_PORT_ID0 0
51#define CYPRESS_WRITE_PORT_ID0 0
52#define CYPRESS_READ_PORT_ID1 0x2
53#define CYPRESS_WRITE_PORT_ID1 1
54
55#define CYPRESS_MAX_REQSIZE 8
56
57
58/* table of devices that work with this driver */
Németh Márton33b9e162010-01-10 15:34:45 +010059static const struct usb_device_id cypress_table[] = {
Oliver Bock9189bfc2006-06-22 19:04:47 +020060 { USB_DEVICE(CYPRESS_VENDOR_ID, CYPRESS_PRODUCT_ID) },
61 { }
62};
63MODULE_DEVICE_TABLE(usb, cypress_table);
64
65/* structure to hold all of our device specific stuff */
66struct cypress {
67 struct usb_device * udev;
68 unsigned char port[2];
69};
70
71/* used to send usb control messages to device */
72static int vendor_command(struct cypress *dev, unsigned char request,
73 unsigned char address, unsigned char data)
74{
75 int retval = 0;
76 unsigned int pipe;
77 unsigned char *iobuf;
78
79 /* allocate some memory for the i/o buffer*/
80 iobuf = kzalloc(CYPRESS_MAX_REQSIZE, GFP_KERNEL);
81 if (!iobuf) {
82 dev_err(&dev->udev->dev, "Out of memory!\n");
83 retval = -ENOMEM;
84 goto error;
85 }
86
87 dev_dbg(&dev->udev->dev, "Sending usb_control_msg (data: %d)\n", data);
88
89 /* prepare usb control message and send it upstream */
90 pipe = usb_rcvctrlpipe(dev->udev, 0);
91 retval = usb_control_msg(dev->udev, pipe, request,
92 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
93 address, data, iobuf, CYPRESS_MAX_REQSIZE,
94 USB_CTRL_GET_TIMEOUT);
95
96 /* store returned data (more READs to be added) */
97 switch (request) {
98 case CYPRESS_READ_PORT:
99 if (address == CYPRESS_READ_PORT_ID0) {
100 dev->port[0] = iobuf[1];
101 dev_dbg(&dev->udev->dev,
102 "READ_PORT0 returned: %d\n",
103 dev->port[0]);
104 }
105 else if (address == CYPRESS_READ_PORT_ID1) {
106 dev->port[1] = iobuf[1];
107 dev_dbg(&dev->udev->dev,
108 "READ_PORT1 returned: %d\n",
109 dev->port[1]);
110 }
111 break;
112 }
113
114 kfree(iobuf);
115error:
116 return retval;
117}
118
119/* write port value */
120static ssize_t write_port(struct device *dev, struct device_attribute *attr,
121 const char *buf, size_t count,
122 int port_num, int write_id)
123{
124 int value = -1;
125 int result = 0;
126
127 struct usb_interface *intf = to_usb_interface(dev);
128 struct cypress *cyp = usb_get_intfdata(intf);
129
130 dev_dbg(&cyp->udev->dev, "WRITE_PORT%d called\n", port_num);
131
132 /* validate input data */
133 if (sscanf(buf, "%d", &value) < 1) {
134 result = -EINVAL;
135 goto error;
136 }
137 if (value < 0 || value > 255) {
138 result = -EINVAL;
139 goto error;
140 }
141
142 result = vendor_command(cyp, CYPRESS_WRITE_PORT, write_id,
143 (unsigned char)value);
144
145 dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
146error:
147 return result < 0 ? result : count;
148}
149
150/* attribute callback handler (write) */
151static ssize_t set_port0_handler(struct device *dev,
152 struct device_attribute *attr,
153 const char *buf, size_t count)
154{
155 return write_port(dev, attr, buf, count, 0, CYPRESS_WRITE_PORT_ID0);
156}
157
158/* attribute callback handler (write) */
159static ssize_t set_port1_handler(struct device *dev,
160 struct device_attribute *attr,
161 const char *buf, size_t count)
162{
163 return write_port(dev, attr, buf, count, 1, CYPRESS_WRITE_PORT_ID1);
164}
165
166/* read port value */
167static ssize_t read_port(struct device *dev, struct device_attribute *attr,
168 char *buf, int port_num, int read_id)
169{
170 int result = 0;
171
172 struct usb_interface *intf = to_usb_interface(dev);
173 struct cypress *cyp = usb_get_intfdata(intf);
174
175 dev_dbg(&cyp->udev->dev, "READ_PORT%d called\n", port_num);
176
177 result = vendor_command(cyp, CYPRESS_READ_PORT, read_id, 0);
178
179 dev_dbg(&cyp->udev->dev, "Result of vendor_command: %d\n\n", result);
180
181 return sprintf(buf, "%d", cyp->port[port_num]);
182}
183
184/* attribute callback handler (read) */
185static ssize_t get_port0_handler(struct device *dev,
186 struct device_attribute *attr, char *buf)
187{
188 return read_port(dev, attr, buf, 0, CYPRESS_READ_PORT_ID0);
189}
190
191/* attribute callback handler (read) */
192static ssize_t get_port1_handler(struct device *dev,
193 struct device_attribute *attr, char *buf)
194{
195 return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
196}
197
198static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
199 get_port0_handler, set_port0_handler);
200
201static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
202 get_port1_handler, set_port1_handler);
203
204
205static int cypress_probe(struct usb_interface *interface,
206 const struct usb_device_id *id)
207{
208 struct cypress *dev = NULL;
209 int retval = -ENOMEM;
210
211 /* allocate memory for our device state and initialize it */
212 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
213 if (dev == NULL) {
Greg Kroah-Hartmanb93b58e2006-08-14 17:32:51 -0700214 dev_err(&interface->dev, "Out of memory!\n");
Greg Kroah-Hartman4d42e1b2006-08-28 11:43:25 -0700215 goto error_mem;
Oliver Bock9189bfc2006-06-22 19:04:47 +0200216 }
217
218 dev->udev = usb_get_dev(interface_to_usbdev(interface));
219
220 /* save our data pointer in this interface device */
221 usb_set_intfdata(interface, dev);
222
223 /* create device attribute files */
Greg Kroah-Hartman4d42e1b2006-08-28 11:43:25 -0700224 retval = device_create_file(&interface->dev, &dev_attr_port0);
225 if (retval)
226 goto error;
227 retval = device_create_file(&interface->dev, &dev_attr_port1);
228 if (retval)
229 goto error;
Oliver Bock9189bfc2006-06-22 19:04:47 +0200230
231 /* let the user know that the device is now attached */
232 dev_info(&interface->dev,
233 "Cypress CY7C63xxx device now attached\n");
Greg Kroah-Hartman4d42e1b2006-08-28 11:43:25 -0700234 return 0;
Oliver Bock9189bfc2006-06-22 19:04:47 +0200235
Oliver Bock9189bfc2006-06-22 19:04:47 +0200236error:
Greg Kroah-Hartman4d42e1b2006-08-28 11:43:25 -0700237 device_remove_file(&interface->dev, &dev_attr_port0);
238 device_remove_file(&interface->dev, &dev_attr_port1);
239 usb_set_intfdata(interface, NULL);
240 usb_put_dev(dev->udev);
241 kfree(dev);
242
243error_mem:
Oliver Bock9189bfc2006-06-22 19:04:47 +0200244 return retval;
245}
246
247static void cypress_disconnect(struct usb_interface *interface)
248{
249 struct cypress *dev;
250
251 dev = usb_get_intfdata(interface);
Oliver Bock9189bfc2006-06-22 19:04:47 +0200252
253 /* remove device attribute files */
254 device_remove_file(&interface->dev, &dev_attr_port0);
255 device_remove_file(&interface->dev, &dev_attr_port1);
Oliver Neukum949ce472007-03-30 10:52:16 +0200256 /* the intfdata can be set to NULL only after the
257 * device files have been removed */
258 usb_set_intfdata(interface, NULL);
Oliver Bock9189bfc2006-06-22 19:04:47 +0200259
260 usb_put_dev(dev->udev);
261
262 dev_info(&interface->dev,
263 "Cypress CY7C63xxx device now disconnected\n");
264
265 kfree(dev);
266}
267
268static struct usb_driver cypress_driver = {
269 .name = "cypress_cy7c63",
270 .probe = cypress_probe,
271 .disconnect = cypress_disconnect,
272 .id_table = cypress_table,
273};
274
275static int __init cypress_init(void)
276{
277 int result;
278
279 /* register this driver with the USB subsystem */
280 result = usb_register(&cypress_driver);
Greg Kroah-Hartmanfd3f1912008-08-14 09:37:34 -0700281 if (result)
282 printk(KERN_ERR KBUILD_MODNAME ": usb_register failed! "
283 "Error number: %d\n", result);
Oliver Bock9189bfc2006-06-22 19:04:47 +0200284
285 return result;
286}
287
288static void __exit cypress_exit(void)
289{
290 /* deregister this driver with the USB subsystem */
291 usb_deregister(&cypress_driver);
292}
293
294module_init(cypress_init);
295module_exit(cypress_exit);
296
297MODULE_AUTHOR(DRIVER_AUTHOR);
298MODULE_DESCRIPTION(DRIVER_DESC);
299
300MODULE_LICENSE("GPL");