Bibek Basu | 0cb3fcd | 2011-02-09 11:02:35 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) ST-Ericsson SA 2011 |
| 3 | * |
| 4 | * Author: BIBEK BASU <bibek.basu@stericsson.com> |
| 5 | * License terms: GNU General Public License (GPL) version 2 |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | */ |
| 11 | #include <linux/kernel.h> |
| 12 | #include <linux/types.h> |
| 13 | #include <linux/slab.h> |
| 14 | #include <linux/init.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/err.h> |
| 17 | #include <linux/platform_device.h> |
Bibek Basu | 0cb3fcd | 2011-02-09 11:02:35 +0530 | [diff] [blame] | 18 | #include <linux/gpio.h> |
| 19 | #include <linux/irq.h> |
| 20 | #include <linux/interrupt.h> |
| 21 | #include <linux/mfd/ab8500.h> |
| 22 | #include <linux/mfd/abx500.h> |
| 23 | #include <linux/mfd/ab8500/gpio.h> |
| 24 | |
| 25 | /* |
| 26 | * GPIO registers offset |
| 27 | * Bank: 0x10 |
| 28 | */ |
| 29 | #define AB8500_GPIO_SEL1_REG 0x00 |
| 30 | #define AB8500_GPIO_SEL2_REG 0x01 |
| 31 | #define AB8500_GPIO_SEL3_REG 0x02 |
| 32 | #define AB8500_GPIO_SEL4_REG 0x03 |
| 33 | #define AB8500_GPIO_SEL5_REG 0x04 |
| 34 | #define AB8500_GPIO_SEL6_REG 0x05 |
| 35 | |
| 36 | #define AB8500_GPIO_DIR1_REG 0x10 |
| 37 | #define AB8500_GPIO_DIR2_REG 0x11 |
| 38 | #define AB8500_GPIO_DIR3_REG 0x12 |
| 39 | #define AB8500_GPIO_DIR4_REG 0x13 |
| 40 | #define AB8500_GPIO_DIR5_REG 0x14 |
| 41 | #define AB8500_GPIO_DIR6_REG 0x15 |
| 42 | |
| 43 | #define AB8500_GPIO_OUT1_REG 0x20 |
| 44 | #define AB8500_GPIO_OUT2_REG 0x21 |
| 45 | #define AB8500_GPIO_OUT3_REG 0x22 |
| 46 | #define AB8500_GPIO_OUT4_REG 0x23 |
| 47 | #define AB8500_GPIO_OUT5_REG 0x24 |
| 48 | #define AB8500_GPIO_OUT6_REG 0x25 |
| 49 | |
| 50 | #define AB8500_GPIO_PUD1_REG 0x30 |
| 51 | #define AB8500_GPIO_PUD2_REG 0x31 |
| 52 | #define AB8500_GPIO_PUD3_REG 0x32 |
| 53 | #define AB8500_GPIO_PUD4_REG 0x33 |
| 54 | #define AB8500_GPIO_PUD5_REG 0x34 |
| 55 | #define AB8500_GPIO_PUD6_REG 0x35 |
| 56 | |
| 57 | #define AB8500_GPIO_IN1_REG 0x40 |
| 58 | #define AB8500_GPIO_IN2_REG 0x41 |
| 59 | #define AB8500_GPIO_IN3_REG 0x42 |
| 60 | #define AB8500_GPIO_IN4_REG 0x43 |
| 61 | #define AB8500_GPIO_IN5_REG 0x44 |
| 62 | #define AB8500_GPIO_IN6_REG 0x45 |
| 63 | #define AB8500_GPIO_ALTFUN_REG 0x45 |
| 64 | #define ALTFUN_REG_INDEX 6 |
| 65 | #define AB8500_NUM_GPIO 42 |
| 66 | #define AB8500_NUM_VIR_GPIO_IRQ 16 |
| 67 | |
| 68 | enum ab8500_gpio_action { |
| 69 | NONE, |
| 70 | STARTUP, |
| 71 | SHUTDOWN, |
| 72 | MASK, |
| 73 | UNMASK |
| 74 | }; |
| 75 | |
| 76 | struct ab8500_gpio { |
| 77 | struct gpio_chip chip; |
| 78 | struct ab8500 *parent; |
| 79 | struct device *dev; |
| 80 | struct mutex lock; |
| 81 | u32 irq_base; |
| 82 | enum ab8500_gpio_action irq_action; |
| 83 | u16 rising; |
| 84 | u16 falling; |
| 85 | }; |
| 86 | /** |
| 87 | * to_ab8500_gpio() - get the pointer to ab8500_gpio |
| 88 | * @chip: Member of the structure ab8500_gpio |
| 89 | */ |
| 90 | static inline struct ab8500_gpio *to_ab8500_gpio(struct gpio_chip *chip) |
| 91 | { |
| 92 | return container_of(chip, struct ab8500_gpio, chip); |
| 93 | } |
| 94 | |
| 95 | static int ab8500_gpio_set_bits(struct gpio_chip *chip, u8 reg, |
| 96 | unsigned offset, int val) |
| 97 | { |
| 98 | struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); |
| 99 | u8 pos = offset % 8; |
| 100 | int ret; |
| 101 | |
| 102 | reg = reg + (offset / 8); |
| 103 | ret = abx500_mask_and_set_register_interruptible(ab8500_gpio->dev, |
| 104 | AB8500_MISC, reg, 1 << pos, val << pos); |
| 105 | if (ret < 0) |
| 106 | dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); |
| 107 | return ret; |
| 108 | } |
| 109 | /** |
| 110 | * ab8500_gpio_get() - Get the particular GPIO value |
| 111 | * @chip: Gpio device |
| 112 | * @offset: GPIO number to read |
| 113 | */ |
| 114 | static int ab8500_gpio_get(struct gpio_chip *chip, unsigned offset) |
| 115 | { |
| 116 | struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); |
| 117 | u8 mask = 1 << (offset % 8); |
| 118 | u8 reg = AB8500_GPIO_OUT1_REG + (offset / 8); |
| 119 | int ret; |
| 120 | u8 data; |
| 121 | ret = abx500_get_register_interruptible(ab8500_gpio->dev, AB8500_MISC, |
| 122 | reg, &data); |
| 123 | if (ret < 0) { |
| 124 | dev_err(ab8500_gpio->dev, "%s read failed\n", __func__); |
| 125 | return ret; |
| 126 | } |
| 127 | return (data & mask) >> (offset % 8); |
| 128 | } |
| 129 | |
| 130 | static void ab8500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) |
| 131 | { |
| 132 | struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); |
| 133 | int ret; |
| 134 | /* Write the data */ |
| 135 | ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, 1); |
| 136 | if (ret < 0) |
| 137 | dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); |
| 138 | } |
| 139 | |
| 140 | static int ab8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset, |
| 141 | int val) |
| 142 | { |
| 143 | int ret; |
| 144 | /* set direction as output */ |
| 145 | ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1); |
| 146 | if (ret < 0) |
| 147 | return ret; |
| 148 | /* disable pull down */ |
| 149 | ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1); |
| 150 | if (ret < 0) |
| 151 | return ret; |
| 152 | /* set the output as 1 or 0 */ |
| 153 | return ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); |
| 154 | |
| 155 | } |
| 156 | |
| 157 | static int ab8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| 158 | { |
| 159 | /* set the register as input */ |
| 160 | return ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0); |
| 161 | } |
| 162 | |
| 163 | static int ab8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) |
| 164 | { |
| 165 | /* |
| 166 | * Only some GPIOs are interrupt capable, and they are |
| 167 | * organized in discontiguous clusters: |
| 168 | * |
| 169 | * GPIO6 to GPIO13 |
| 170 | * GPIO24 and GPIO25 |
| 171 | * GPIO36 to GPIO41 |
| 172 | */ |
| 173 | static struct ab8500_gpio_irq_cluster { |
| 174 | int start; |
| 175 | int end; |
| 176 | } clusters[] = { |
| 177 | {.start = 6, .end = 13}, |
| 178 | {.start = 24, .end = 25}, |
| 179 | {.start = 36, .end = 41}, |
| 180 | }; |
| 181 | struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); |
| 182 | int base = ab8500_gpio->irq_base; |
| 183 | int i; |
| 184 | |
| 185 | for (i = 0; i < ARRAY_SIZE(clusters); i++) { |
| 186 | struct ab8500_gpio_irq_cluster *cluster = &clusters[i]; |
| 187 | |
| 188 | if (offset >= cluster->start && offset <= cluster->end) |
| 189 | return base + offset - cluster->start; |
| 190 | |
| 191 | /* Advance by the number of gpios in this cluster */ |
| 192 | base += cluster->end - cluster->start + 1; |
| 193 | } |
| 194 | |
| 195 | return -EINVAL; |
| 196 | } |
| 197 | |
| 198 | static struct gpio_chip ab8500gpio_chip = { |
| 199 | .label = "ab8500_gpio", |
| 200 | .owner = THIS_MODULE, |
| 201 | .direction_input = ab8500_gpio_direction_input, |
| 202 | .get = ab8500_gpio_get, |
| 203 | .direction_output = ab8500_gpio_direction_output, |
| 204 | .set = ab8500_gpio_set, |
| 205 | .to_irq = ab8500_gpio_to_irq, |
| 206 | }; |
| 207 | |
| 208 | static unsigned int irq_to_rising(unsigned int irq) |
| 209 | { |
| 210 | struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| 211 | int offset = irq - ab8500_gpio->irq_base; |
| 212 | int new_irq = offset + AB8500_INT_GPIO6R |
| 213 | + ab8500_gpio->parent->irq_base; |
| 214 | return new_irq; |
| 215 | } |
| 216 | |
| 217 | static unsigned int irq_to_falling(unsigned int irq) |
| 218 | { |
| 219 | struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| 220 | int offset = irq - ab8500_gpio->irq_base; |
| 221 | int new_irq = offset + AB8500_INT_GPIO6F |
| 222 | + ab8500_gpio->parent->irq_base; |
| 223 | return new_irq; |
| 224 | |
| 225 | } |
| 226 | |
| 227 | static unsigned int rising_to_irq(unsigned int irq, void *dev) |
| 228 | { |
| 229 | struct ab8500_gpio *ab8500_gpio = dev; |
| 230 | int offset = irq - AB8500_INT_GPIO6R |
| 231 | - ab8500_gpio->parent->irq_base ; |
| 232 | int new_irq = offset + ab8500_gpio->irq_base; |
| 233 | return new_irq; |
| 234 | } |
| 235 | |
| 236 | static unsigned int falling_to_irq(unsigned int irq, void *dev) |
| 237 | { |
| 238 | struct ab8500_gpio *ab8500_gpio = dev; |
| 239 | int offset = irq - AB8500_INT_GPIO6F |
| 240 | - ab8500_gpio->parent->irq_base ; |
| 241 | int new_irq = offset + ab8500_gpio->irq_base; |
| 242 | return new_irq; |
| 243 | |
| 244 | } |
| 245 | |
| 246 | /* |
| 247 | * IRQ handler |
| 248 | */ |
| 249 | |
| 250 | static irqreturn_t handle_rising(int irq, void *dev) |
| 251 | { |
| 252 | |
| 253 | handle_nested_irq(rising_to_irq(irq , dev)); |
| 254 | return IRQ_HANDLED; |
| 255 | } |
| 256 | |
| 257 | static irqreturn_t handle_falling(int irq, void *dev) |
| 258 | { |
| 259 | |
| 260 | handle_nested_irq(falling_to_irq(irq, dev)); |
| 261 | return IRQ_HANDLED; |
| 262 | } |
| 263 | |
| 264 | static void ab8500_gpio_irq_lock(unsigned int irq) |
| 265 | { |
| 266 | struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| 267 | mutex_lock(&ab8500_gpio->lock); |
| 268 | } |
| 269 | |
| 270 | static void ab8500_gpio_irq_sync_unlock(unsigned int irq) |
| 271 | { |
| 272 | struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| 273 | int offset = irq - ab8500_gpio->irq_base; |
| 274 | bool rising = ab8500_gpio->rising & BIT(offset); |
| 275 | bool falling = ab8500_gpio->falling & BIT(offset); |
| 276 | int ret; |
| 277 | |
| 278 | switch (ab8500_gpio->irq_action) { |
| 279 | case STARTUP: |
| 280 | if (rising) |
| 281 | ret = request_threaded_irq(irq_to_rising(irq), |
| 282 | NULL, handle_rising, |
| 283 | IRQF_TRIGGER_RISING, |
| 284 | "ab8500-gpio-r", ab8500_gpio); |
| 285 | if (falling) |
| 286 | ret = request_threaded_irq(irq_to_falling(irq), |
| 287 | NULL, handle_falling, |
| 288 | IRQF_TRIGGER_FALLING, |
| 289 | "ab8500-gpio-f", ab8500_gpio); |
| 290 | break; |
| 291 | case SHUTDOWN: |
| 292 | if (rising) |
| 293 | free_irq(irq_to_rising(irq), ab8500_gpio); |
| 294 | if (falling) |
| 295 | free_irq(irq_to_falling(irq), ab8500_gpio); |
| 296 | break; |
| 297 | case MASK: |
| 298 | if (rising) |
| 299 | disable_irq(irq_to_rising(irq)); |
| 300 | if (falling) |
| 301 | disable_irq(irq_to_falling(irq)); |
| 302 | break; |
| 303 | case UNMASK: |
| 304 | if (rising) |
| 305 | enable_irq(irq_to_rising(irq)); |
| 306 | if (falling) |
| 307 | enable_irq(irq_to_falling(irq)); |
| 308 | break; |
| 309 | case NONE: |
| 310 | break; |
| 311 | } |
| 312 | ab8500_gpio->irq_action = NONE; |
| 313 | ab8500_gpio->rising &= ~(BIT(offset)); |
| 314 | ab8500_gpio->falling &= ~(BIT(offset)); |
| 315 | mutex_unlock(&ab8500_gpio->lock); |
| 316 | } |
| 317 | |
| 318 | |
| 319 | static void ab8500_gpio_irq_mask(unsigned int irq) |
| 320 | { |
| 321 | struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| 322 | ab8500_gpio->irq_action = MASK; |
| 323 | } |
| 324 | |
| 325 | static void ab8500_gpio_irq_unmask(unsigned int irq) |
| 326 | { |
| 327 | struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| 328 | ab8500_gpio->irq_action = UNMASK; |
| 329 | } |
| 330 | |
| 331 | static int ab8500_gpio_irq_set_type(unsigned int irq, unsigned int type) |
| 332 | { |
| 333 | struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| 334 | int offset = irq - ab8500_gpio->irq_base; |
| 335 | |
| 336 | if (type == IRQ_TYPE_EDGE_BOTH) { |
| 337 | ab8500_gpio->rising = BIT(offset); |
| 338 | ab8500_gpio->falling = BIT(offset); |
| 339 | } else if (type == IRQ_TYPE_EDGE_RISING) { |
| 340 | ab8500_gpio->rising = BIT(offset); |
| 341 | } else { |
| 342 | ab8500_gpio->falling = BIT(offset); |
| 343 | } |
| 344 | return 0; |
| 345 | } |
| 346 | |
| 347 | unsigned int ab8500_gpio_irq_startup(unsigned int irq) |
| 348 | { |
| 349 | struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| 350 | ab8500_gpio->irq_action = STARTUP; |
| 351 | return 0; |
| 352 | } |
| 353 | |
| 354 | void ab8500_gpio_irq_shutdown(unsigned int irq) |
| 355 | { |
| 356 | struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); |
| 357 | ab8500_gpio->irq_action = SHUTDOWN; |
| 358 | } |
| 359 | |
| 360 | static struct irq_chip ab8500_gpio_irq_chip = { |
| 361 | .name = "ab8500-gpio", |
| 362 | .startup = ab8500_gpio_irq_startup, |
| 363 | .shutdown = ab8500_gpio_irq_shutdown, |
| 364 | .bus_lock = ab8500_gpio_irq_lock, |
| 365 | .bus_sync_unlock = ab8500_gpio_irq_sync_unlock, |
| 366 | .mask = ab8500_gpio_irq_mask, |
| 367 | .unmask = ab8500_gpio_irq_unmask, |
| 368 | .set_type = ab8500_gpio_irq_set_type, |
| 369 | }; |
| 370 | |
| 371 | static int ab8500_gpio_irq_init(struct ab8500_gpio *ab8500_gpio) |
| 372 | { |
| 373 | u32 base = ab8500_gpio->irq_base; |
| 374 | int irq; |
| 375 | |
| 376 | for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ ; irq++) { |
| 377 | set_irq_chip_data(irq, ab8500_gpio); |
| 378 | set_irq_chip_and_handler(irq, &ab8500_gpio_irq_chip, |
| 379 | handle_simple_irq); |
| 380 | set_irq_nested_thread(irq, 1); |
| 381 | #ifdef CONFIG_ARM |
| 382 | set_irq_flags(irq, IRQF_VALID); |
| 383 | #else |
| 384 | set_irq_noprobe(irq); |
| 385 | #endif |
| 386 | } |
| 387 | |
| 388 | return 0; |
| 389 | } |
| 390 | |
| 391 | static void ab8500_gpio_irq_remove(struct ab8500_gpio *ab8500_gpio) |
| 392 | { |
| 393 | int base = ab8500_gpio->irq_base; |
| 394 | int irq; |
| 395 | |
| 396 | for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ; irq++) { |
| 397 | #ifdef CONFIG_ARM |
| 398 | set_irq_flags(irq, 0); |
| 399 | #endif |
| 400 | set_irq_chip_and_handler(irq, NULL, NULL); |
| 401 | set_irq_chip_data(irq, NULL); |
| 402 | } |
| 403 | } |
| 404 | |
Bill Pemberton | 3836309 | 2012-11-19 13:22:34 -0500 | [diff] [blame^] | 405 | static int ab8500_gpio_probe(struct platform_device *pdev) |
Bibek Basu | 0cb3fcd | 2011-02-09 11:02:35 +0530 | [diff] [blame] | 406 | { |
| 407 | struct ab8500_platform_data *ab8500_pdata = |
| 408 | dev_get_platdata(pdev->dev.parent); |
| 409 | struct ab8500_gpio_platform_data *pdata; |
| 410 | struct ab8500_gpio *ab8500_gpio; |
| 411 | int ret; |
| 412 | int i; |
| 413 | |
| 414 | pdata = ab8500_pdata->gpio; |
| 415 | if (!pdata) { |
| 416 | dev_err(&pdev->dev, "gpio platform data missing\n"); |
| 417 | return -ENODEV; |
| 418 | } |
| 419 | |
| 420 | ab8500_gpio = kzalloc(sizeof(struct ab8500_gpio), GFP_KERNEL); |
| 421 | if (ab8500_gpio == NULL) { |
| 422 | dev_err(&pdev->dev, "failed to allocate memory\n"); |
| 423 | return -ENOMEM; |
| 424 | } |
| 425 | ab8500_gpio->dev = &pdev->dev; |
| 426 | ab8500_gpio->parent = dev_get_drvdata(pdev->dev.parent); |
| 427 | ab8500_gpio->chip = ab8500gpio_chip; |
| 428 | ab8500_gpio->chip.ngpio = AB8500_NUM_GPIO; |
| 429 | ab8500_gpio->chip.dev = &pdev->dev; |
| 430 | ab8500_gpio->chip.base = pdata->gpio_base; |
| 431 | ab8500_gpio->irq_base = pdata->irq_base; |
| 432 | /* initialize the lock */ |
| 433 | mutex_init(&ab8500_gpio->lock); |
| 434 | /* |
| 435 | * AB8500 core will handle and clear the IRQ |
| 436 | * configre GPIO based on config-reg value. |
| 437 | * These values are for selecting the PINs as |
| 438 | * GPIO or alternate function |
| 439 | */ |
| 440 | for (i = AB8500_GPIO_SEL1_REG; i <= AB8500_GPIO_SEL6_REG; i++) { |
| 441 | ret = abx500_set_register_interruptible(ab8500_gpio->dev, |
| 442 | AB8500_MISC, i, |
| 443 | pdata->config_reg[i]); |
| 444 | if (ret < 0) |
| 445 | goto out_free; |
| 446 | } |
| 447 | ret = abx500_set_register_interruptible(ab8500_gpio->dev, AB8500_MISC, |
| 448 | AB8500_GPIO_ALTFUN_REG, |
| 449 | pdata->config_reg[ALTFUN_REG_INDEX]); |
| 450 | if (ret < 0) |
| 451 | goto out_free; |
| 452 | |
| 453 | ret = ab8500_gpio_irq_init(ab8500_gpio); |
| 454 | if (ret) |
| 455 | goto out_free; |
| 456 | ret = gpiochip_add(&ab8500_gpio->chip); |
| 457 | if (ret) { |
| 458 | dev_err(&pdev->dev, "unable to add gpiochip: %d\n", |
| 459 | ret); |
| 460 | goto out_rem_irq; |
| 461 | } |
| 462 | platform_set_drvdata(pdev, ab8500_gpio); |
| 463 | return 0; |
| 464 | |
| 465 | out_rem_irq: |
| 466 | ab8500_gpio_irq_remove(ab8500_gpio); |
| 467 | out_free: |
| 468 | mutex_destroy(&ab8500_gpio->lock); |
| 469 | kfree(ab8500_gpio); |
| 470 | return ret; |
| 471 | } |
| 472 | |
| 473 | /* |
| 474 | * ab8500_gpio_remove() - remove Ab8500-gpio driver |
| 475 | * @pdev : Platform device registered |
| 476 | */ |
| 477 | static int __devexit ab8500_gpio_remove(struct platform_device *pdev) |
| 478 | { |
| 479 | struct ab8500_gpio *ab8500_gpio = platform_get_drvdata(pdev); |
| 480 | int ret; |
| 481 | |
| 482 | ret = gpiochip_remove(&ab8500_gpio->chip); |
| 483 | if (ret < 0) { |
Joe Perches | 85ee7a1 | 2011-04-23 20:38:19 -0700 | [diff] [blame] | 484 | dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n", |
| 485 | ret); |
Bibek Basu | 0cb3fcd | 2011-02-09 11:02:35 +0530 | [diff] [blame] | 486 | return ret; |
| 487 | } |
| 488 | |
| 489 | platform_set_drvdata(pdev, NULL); |
| 490 | mutex_destroy(&ab8500_gpio->lock); |
| 491 | kfree(ab8500_gpio); |
| 492 | |
| 493 | return 0; |
| 494 | } |
| 495 | |
| 496 | static struct platform_driver ab8500_gpio_driver = { |
| 497 | .driver = { |
| 498 | .name = "ab8500-gpio", |
| 499 | .owner = THIS_MODULE, |
| 500 | }, |
| 501 | .probe = ab8500_gpio_probe, |
Bill Pemberton | 8283c4f | 2012-11-19 13:20:08 -0500 | [diff] [blame] | 502 | .remove = ab8500_gpio_remove, |
Bibek Basu | 0cb3fcd | 2011-02-09 11:02:35 +0530 | [diff] [blame] | 503 | }; |
| 504 | |
| 505 | static int __init ab8500_gpio_init(void) |
| 506 | { |
| 507 | return platform_driver_register(&ab8500_gpio_driver); |
| 508 | } |
| 509 | arch_initcall(ab8500_gpio_init); |
| 510 | |
| 511 | static void __exit ab8500_gpio_exit(void) |
| 512 | { |
| 513 | platform_driver_unregister(&ab8500_gpio_driver); |
| 514 | } |
| 515 | module_exit(ab8500_gpio_exit); |
| 516 | |
| 517 | MODULE_AUTHOR("BIBEK BASU <bibek.basu@stericsson.com>"); |
Joe Perches | 85ee7a1 | 2011-04-23 20:38:19 -0700 | [diff] [blame] | 518 | MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO"); |
Axel Lin | 5b8ce5e | 2011-07-28 22:16:49 +0800 | [diff] [blame] | 519 | MODULE_ALIAS("platform:ab8500-gpio"); |
Bibek Basu | 0cb3fcd | 2011-02-09 11:02:35 +0530 | [diff] [blame] | 520 | MODULE_LICENSE("GPL v2"); |