Alessandro Rubini | 6007b1b | 2013-06-18 23:47:56 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012 CERN (www.cern.ch) |
| 3 | * Author: Alessandro Rubini <rubini@gnudd.com> |
| 4 | * |
| 5 | * Released according to the GNU GPL, version 2 or any later version. |
| 6 | * |
| 7 | * This work is part of the White Rabbit project, a research effort led |
| 8 | * by CERN, the European Institute for Nuclear Research. |
| 9 | */ |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/string.h> |
| 12 | #include <linux/firmware.h> |
| 13 | #include <linux/init.h> |
| 14 | #include <linux/fmc.h> |
| 15 | #include <asm/unaligned.h> |
| 16 | |
| 17 | /* |
| 18 | * This module uses the firmware loader to program the whole or part |
| 19 | * of the FMC eeprom. The meat is in the _run functions. However, no |
| 20 | * default file name is provided, to avoid accidental mishaps. Also, |
| 21 | * you must pass the busid argument |
| 22 | */ |
| 23 | static struct fmc_driver fwe_drv; |
| 24 | |
| 25 | FMC_PARAM_BUSID(fwe_drv); |
| 26 | |
| 27 | /* The "file=" is like the generic "gateware=" used elsewhere */ |
| 28 | static char *fwe_file[FMC_MAX_CARDS]; |
| 29 | static int fwe_file_n; |
| 30 | module_param_array_named(file, fwe_file, charp, &fwe_file_n, 444); |
| 31 | |
| 32 | static int fwe_run_tlv(struct fmc_device *fmc, const struct firmware *fw, |
| 33 | int write) |
| 34 | { |
| 35 | const uint8_t *p = fw->data; |
| 36 | int len = fw->size; |
| 37 | uint16_t thislen, thisaddr; |
| 38 | int err; |
| 39 | |
| 40 | /* format is: 'w' addr16 len16 data... */ |
| 41 | while (len > 5) { |
| 42 | thisaddr = get_unaligned_le16(p+1); |
| 43 | thislen = get_unaligned_le16(p+3); |
| 44 | if (p[0] != 'w' || thislen + 5 > len) { |
| 45 | dev_err(&fmc->dev, "invalid tlv at offset %ti\n", |
| 46 | p - fw->data); |
| 47 | return -EINVAL; |
| 48 | } |
| 49 | err = 0; |
| 50 | if (write) { |
| 51 | dev_info(&fmc->dev, "write %i bytes at 0x%04x\n", |
| 52 | thislen, thisaddr); |
| 53 | err = fmc->op->write_ee(fmc, thisaddr, p + 5, thislen); |
| 54 | } |
| 55 | if (err < 0) { |
| 56 | dev_err(&fmc->dev, "write failure @0x%04x\n", |
| 57 | thisaddr); |
| 58 | return err; |
| 59 | } |
| 60 | p += 5 + thislen; |
| 61 | len -= 5 + thislen; |
| 62 | } |
| 63 | if (write) |
| 64 | dev_info(&fmc->dev, "write_eeprom: success\n"); |
| 65 | return 0; |
| 66 | } |
| 67 | |
| 68 | static int fwe_run_bin(struct fmc_device *fmc, const struct firmware *fw) |
| 69 | { |
| 70 | int ret; |
| 71 | |
| 72 | dev_info(&fmc->dev, "programming %zi bytes\n", fw->size); |
| 73 | ret = fmc->op->write_ee(fmc, 0, (void *)fw->data, fw->size); |
| 74 | if (ret < 0) { |
| 75 | dev_info(&fmc->dev, "write_eeprom: error %i\n", ret); |
| 76 | return ret; |
| 77 | } |
| 78 | dev_info(&fmc->dev, "write_eeprom: success\n"); |
| 79 | return 0; |
| 80 | } |
| 81 | |
| 82 | static int fwe_run(struct fmc_device *fmc, const struct firmware *fw, char *s) |
| 83 | { |
| 84 | char *last4 = s + strlen(s) - 4; |
| 85 | int err; |
| 86 | |
| 87 | if (!strcmp(last4, ".bin")) |
| 88 | return fwe_run_bin(fmc, fw); |
| 89 | if (!strcmp(last4, ".tlv")) { |
| 90 | err = fwe_run_tlv(fmc, fw, 0); |
| 91 | if (!err) |
| 92 | err = fwe_run_tlv(fmc, fw, 1); |
| 93 | return err; |
| 94 | } |
| 95 | dev_err(&fmc->dev, "invalid file name \"%s\"\n", s); |
| 96 | return -EINVAL; |
| 97 | } |
| 98 | |
| 99 | /* |
| 100 | * Programming is done at probe time. Morever, only those listed with |
| 101 | * busid= are programmed. |
| 102 | * card is probed for, only one is programmed. Unfortunately, it's |
| 103 | * difficult to know in advance when probing the first card if others |
| 104 | * are there. |
| 105 | */ |
Jingoo Han | 3d04dd2 | 2013-08-12 12:35:46 +0900 | [diff] [blame^] | 106 | static int fwe_probe(struct fmc_device *fmc) |
Alessandro Rubini | 6007b1b | 2013-06-18 23:47:56 +0200 | [diff] [blame] | 107 | { |
| 108 | int err, index = 0; |
| 109 | const struct firmware *fw; |
| 110 | struct device *dev = &fmc->dev; |
| 111 | char *s; |
| 112 | |
| 113 | if (!fwe_drv.busid_n) { |
| 114 | dev_err(dev, "%s: no busid passed, refusing all cards\n", |
| 115 | KBUILD_MODNAME); |
| 116 | return -ENODEV; |
| 117 | } |
| 118 | if (fmc->op->validate) |
| 119 | index = fmc->op->validate(fmc, &fwe_drv); |
| 120 | if (index < 0) { |
| 121 | pr_err("%s: refusing device \"%s\"\n", KBUILD_MODNAME, |
| 122 | dev_name(dev)); |
| 123 | return -ENODEV; |
| 124 | } |
| 125 | if (index >= fwe_file_n) { |
| 126 | pr_err("%s: no filename for device index %i\n", |
| 127 | KBUILD_MODNAME, index); |
| 128 | return -ENODEV; |
| 129 | } |
| 130 | s = fwe_file[index]; |
| 131 | if (!s) { |
| 132 | pr_err("%s: no filename for \"%s\" not programming\n", |
| 133 | KBUILD_MODNAME, dev_name(dev)); |
| 134 | return -ENOENT; |
| 135 | } |
| 136 | err = request_firmware(&fw, s, dev); |
| 137 | if (err < 0) { |
| 138 | dev_err(&fmc->dev, "request firmware \"%s\": error %i\n", |
| 139 | s, err); |
| 140 | return err; |
| 141 | } |
| 142 | fwe_run(fmc, fw, s); |
| 143 | release_firmware(fw); |
| 144 | return 0; |
| 145 | } |
| 146 | |
Jingoo Han | 3d04dd2 | 2013-08-12 12:35:46 +0900 | [diff] [blame^] | 147 | static int fwe_remove(struct fmc_device *fmc) |
Alessandro Rubini | 6007b1b | 2013-06-18 23:47:56 +0200 | [diff] [blame] | 148 | { |
| 149 | return 0; |
| 150 | } |
| 151 | |
| 152 | static struct fmc_driver fwe_drv = { |
| 153 | .version = FMC_VERSION, |
| 154 | .driver.name = KBUILD_MODNAME, |
| 155 | .probe = fwe_probe, |
| 156 | .remove = fwe_remove, |
| 157 | /* no table, as the current match just matches everything */ |
| 158 | }; |
| 159 | |
| 160 | static int fwe_init(void) |
| 161 | { |
| 162 | int ret; |
| 163 | |
| 164 | ret = fmc_driver_register(&fwe_drv); |
| 165 | return ret; |
| 166 | } |
| 167 | |
| 168 | static void fwe_exit(void) |
| 169 | { |
| 170 | fmc_driver_unregister(&fwe_drv); |
| 171 | } |
| 172 | |
| 173 | module_init(fwe_init); |
| 174 | module_exit(fwe_exit); |
| 175 | |
| 176 | MODULE_LICENSE("GPL"); |