blob: f0887d12a5bb5cd77bc399392fd51a14b4ca97ff [file] [log] [blame]
Sam Ravnborg1032c0b2007-11-06 21:35:08 +01001# x86 configuration
Sam Ravnborgdaa93fa2007-11-12 20:54:30 +01002mainmenu "Linux Kernel Configuration for x86"
3
4# Select 32 or 64 bit
5config 64BIT
Sam Ravnborg68409992007-11-17 15:37:31 +01006 bool "64-bit kernel" if ARCH = "x86"
7 default ARCH = "x86_64"
Sam Ravnborgdaa93fa2007-11-12 20:54:30 +01008 help
9 Say yes to build a 64-bit kernel - formerly known as x86_64
10 Say no to build a 32-bit kernel - formerly known as i386
11
12config X86_32
13 def_bool !64BIT
14
15config X86_64
16 def_bool 64BIT
Sam Ravnborg1032c0b2007-11-06 21:35:08 +010017
18### Arch settings
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010019config X86
Harvey Harrison3c2362e2008-01-30 13:31:03 +010020 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010021
Nick Piggin95c354f2008-01-30 13:31:20 +010022config GENERIC_LOCKBREAK
Nick Piggin314cdbe2008-01-30 13:31:21 +010023 def_bool n
Nick Piggin95c354f2008-01-30 13:31:20 +010024
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010025config GENERIC_TIME
Harvey Harrison3c2362e2008-01-30 13:31:03 +010026 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010027
28config GENERIC_CMOS_UPDATE
Harvey Harrison3c2362e2008-01-30 13:31:03 +010029 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010030
31config CLOCKSOURCE_WATCHDOG
Harvey Harrison3c2362e2008-01-30 13:31:03 +010032 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010033
34config GENERIC_CLOCKEVENTS
Harvey Harrison3c2362e2008-01-30 13:31:03 +010035 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010036
37config GENERIC_CLOCKEVENTS_BROADCAST
Harvey Harrison3c2362e2008-01-30 13:31:03 +010038 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010039 depends on X86_64 || (X86_32 && X86_LOCAL_APIC)
40
41config LOCKDEP_SUPPORT
Harvey Harrison3c2362e2008-01-30 13:31:03 +010042 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010043
44config STACKTRACE_SUPPORT
Harvey Harrison3c2362e2008-01-30 13:31:03 +010045 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010046
47config SEMAPHORE_SLEEPERS
Harvey Harrison3c2362e2008-01-30 13:31:03 +010048 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010049
50config MMU
Harvey Harrison3c2362e2008-01-30 13:31:03 +010051 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010052
53config ZONE_DMA
Harvey Harrison3c2362e2008-01-30 13:31:03 +010054 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010055
56config QUICKLIST
Harvey Harrison3c2362e2008-01-30 13:31:03 +010057 def_bool X86_32
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010058
59config SBUS
60 bool
61
62config GENERIC_ISA_DMA
Harvey Harrison3c2362e2008-01-30 13:31:03 +010063 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010064
65config GENERIC_IOMAP
Harvey Harrison3c2362e2008-01-30 13:31:03 +010066 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010067
68config GENERIC_BUG
Harvey Harrison3c2362e2008-01-30 13:31:03 +010069 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010070 depends on BUG
71
72config GENERIC_HWEIGHT
Harvey Harrison3c2362e2008-01-30 13:31:03 +010073 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010074
75config ARCH_MAY_HAVE_PC_FDC
Harvey Harrison3c2362e2008-01-30 13:31:03 +010076 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010077
78config DMI
Harvey Harrison3c2362e2008-01-30 13:31:03 +010079 def_bool y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010080
Sam Ravnborg1032c0b2007-11-06 21:35:08 +010081config RWSEM_GENERIC_SPINLOCK
82 def_bool !X86_XADD
83
84config RWSEM_XCHGADD_ALGORITHM
85 def_bool X86_XADD
86
87config ARCH_HAS_ILOG2_U32
88 def_bool n
89
90config ARCH_HAS_ILOG2_U64
91 def_bool n
92
93config GENERIC_CALIBRATE_DELAY
94 def_bool y
95
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +010096config GENERIC_TIME_VSYSCALL
97 bool
98 default X86_64
99
travis@sgi.comb32ef632008-01-30 13:32:51 +0100100config ARCH_SETS_UP_PER_CPU_AREA
101 def_bool X86_64
102
Linus Torvalds3743d332007-12-06 09:41:12 -0800103config ARCH_SUPPORTS_OPROFILE
104 bool
105 default y
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +0100106
107
108config ZONE_DMA32
109 bool
110 default X86_64
111
112config ARCH_POPULATES_NODE_MAP
113 def_bool y
114
115config AUDIT_ARCH
116 bool
117 default X86_64
118
119# Use the generic interrupt handling code in kernel/irq/:
120config GENERIC_HARDIRQS
121 bool
122 default y
123
124config GENERIC_IRQ_PROBE
125 bool
126 default y
127
128config GENERIC_PENDING_IRQ
129 bool
130 depends on GENERIC_HARDIRQS && SMP
131 default y
132
133config X86_SMP
134 bool
Sam Ravnborg6b0c3d42008-01-30 13:32:27 +0100135 depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +0100136 default y
137
Sam Ravnborg6b0c3d42008-01-30 13:32:27 +0100138config X86_32_SMP
139 def_bool y
140 depends on X86_32 && SMP
141
142config X86_64_SMP
143 def_bool y
144 depends on X86_64 && SMP
145
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +0100146config X86_HT
147 bool
Adrian Bunkee0011a2007-12-04 17:19:07 +0100148 depends on SMP
149 depends on (X86_32 && !(X86_VISWS || X86_VOYAGER)) || (X86_64 && !MK8)
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +0100150 default y
151
152config X86_BIOS_REBOOT
153 bool
154 depends on X86_32 && !(X86_VISWS || X86_VOYAGER)
155 default y
156
157config X86_TRAMPOLINE
158 bool
159 depends on X86_SMP || (X86_VOYAGER && SMP)
160 default y
161
162config KTIME_SCALAR
163 def_bool X86_32
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100164source "init/Kconfig"
Sam Ravnborg8d5fffb2007-11-06 23:30:30 +0100165
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100166menu "Processor type and features"
167
168source "kernel/time/Kconfig"
169
170config SMP
171 bool "Symmetric multi-processing support"
172 ---help---
173 This enables support for systems with more than one CPU. If you have
174 a system with only one CPU, like most personal computers, say N. If
175 you have a system with more than one CPU, say Y.
176
177 If you say N here, the kernel will run on single and multiprocessor
178 machines, but will use only one CPU of a multiprocessor machine. If
179 you say Y here, the kernel will run on many, but not all,
180 singleprocessor machines. On a singleprocessor machine, the kernel
181 will run faster if you say N here.
182
183 Note that if you say Y here and choose architecture "586" or
184 "Pentium" under "Processor family", the kernel will not work on 486
185 architectures. Similarly, multiprocessor kernels for the "PPro"
186 architecture may not work on all Pentium based boards.
187
188 People using multiprocessor machines who say Y here should also say
189 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
190 Management" code will be disabled if you say Y here.
191
192 See also the <file:Documentation/smp.txt>,
193 <file:Documentation/i386/IO-APIC.txt>,
194 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
195 <http://www.tldp.org/docs.html#howto>.
196
197 If you don't know what to do here, say N.
198
199choice
200 prompt "Subarchitecture Type"
201 default X86_PC
202
203config X86_PC
204 bool "PC-compatible"
205 help
206 Choose this option if your computer is a standard PC or compatible.
207
208config X86_ELAN
209 bool "AMD Elan"
210 depends on X86_32
211 help
212 Select this for an AMD Elan processor.
213
214 Do not use this option for K6/Athlon/Opteron processors!
215
216 If unsure, choose "PC-compatible" instead.
217
218config X86_VOYAGER
219 bool "Voyager (NCR)"
220 depends on X86_32
221 select SMP if !BROKEN
222 help
223 Voyager is an MCA-based 32-way capable SMP architecture proprietary
224 to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based.
225
226 *** WARNING ***
227
228 If you do not specifically know you have a Voyager based machine,
229 say N here, otherwise the kernel you build will not be bootable.
230
231config X86_NUMAQ
232 bool "NUMAQ (IBM/Sequent)"
233 select SMP
234 select NUMA
235 depends on X86_32
236 help
237 This option is used for getting Linux to run on a (IBM/Sequent) NUMA
238 multiquad box. This changes the way that processors are bootstrapped,
239 and uses Clustered Logical APIC addressing mode instead of Flat Logical.
240 You will need a new lynxer.elf file to flash your firmware with - send
241 email to <Martin.Bligh@us.ibm.com>.
242
243config X86_SUMMIT
244 bool "Summit/EXA (IBM x440)"
245 depends on X86_32 && SMP
246 help
247 This option is needed for IBM systems that use the Summit/EXA chipset.
248 In particular, it is needed for the x440.
249
250 If you don't have one of these computers, you should say N here.
251 If you want to build a NUMA kernel, you must select ACPI.
252
253config X86_BIGSMP
254 bool "Support for other sub-arch SMP systems with more than 8 CPUs"
255 depends on X86_32 && SMP
256 help
257 This option is needed for the systems that have more than 8 CPUs
258 and if the system is not of any sub-arch type above.
259
260 If you don't have such a system, you should say N here.
261
262config X86_VISWS
263 bool "SGI 320/540 (Visual Workstation)"
264 depends on X86_32
265 help
266 The SGI Visual Workstation series is an IA32-based workstation
267 based on SGI systems chips with some legacy PC hardware attached.
268
269 Say Y here to create a kernel to run on the SGI 320 or 540.
270
271 A kernel compiled for the Visual Workstation will not run on PCs
272 and vice versa. See <file:Documentation/sgi-visws.txt> for details.
273
274config X86_GENERICARCH
275 bool "Generic architecture (Summit, bigsmp, ES7000, default)"
276 depends on X86_32
277 help
278 This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
279 It is intended for a generic binary kernel.
280 If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
281
282config X86_ES7000
283 bool "Support for Unisys ES7000 IA32 series"
284 depends on X86_32 && SMP
285 help
286 Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
287 supposed to run on an IA32-based Unisys ES7000 system.
288 Only choose this option if you have such a system, otherwise you
289 should say N here.
290
291config X86_VSMP
292 bool "Support for ScaleMP vSMP"
293 depends on X86_64 && PCI
294 help
295 Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
296 supposed to run on these EM64T-based machines. Only choose this option
297 if you have one of these machines.
298
299endchoice
300
301config SCHED_NO_NO_OMIT_FRAME_POINTER
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100302 def_bool y
303 prompt "Single-depth WCHAN output"
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100304 depends on X86_32
305 help
306 Calculate simpler /proc/<PID>/wchan values. If this option
307 is disabled then wchan values will recurse back to the
308 caller function. This provides more accurate wchan values,
309 at the expense of slightly more scheduling overhead.
310
311 If in doubt, say "Y".
312
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100313menuconfig PARAVIRT_GUEST
314 bool "Paravirtualized guest support"
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100315 help
316 Say Y here to get to see options related to running Linux under
317 various hypervisors. This option alone does not add any kernel code.
318
319 If you say N, all options in this submenu will be skipped and disabled.
320
321if PARAVIRT_GUEST
322
323source "arch/x86/xen/Kconfig"
324
325config VMI
326 bool "VMI Guest support"
327 select PARAVIRT
Eduardo Pereira Habkost42d545c2008-01-30 13:33:32 +0100328 depends on X86_32
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100329 depends on !(X86_VISWS || X86_VOYAGER)
330 help
331 VMI provides a paravirtualized interface to the VMware ESX server
332 (it could be used by other hypervisors in theory too, but is not
333 at the moment), by linking the kernel to a GPL-ed ROM module
334 provided by the hypervisor.
335
336source "arch/x86/lguest/Kconfig"
337
Eduardo Pereira Habkoste61bd942008-01-30 13:33:32 +0100338config PARAVIRT
339 bool "Enable paravirtualization code"
Eduardo Pereira Habkost42d545c2008-01-30 13:33:32 +0100340 depends on !(X86_VISWS || X86_VOYAGER)
Eduardo Pereira Habkoste61bd942008-01-30 13:33:32 +0100341 help
342 This changes the kernel so it can modify itself when it is run
343 under a hypervisor, potentially improving performance significantly
344 over full virtualization. However, when run without a hypervisor
345 the kernel is theoretically slower and slightly larger.
346
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100347endif
348
349config ACPI_SRAT
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100350 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100351 depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
352 select ACPI_NUMA
353
354config HAVE_ARCH_PARSE_SRAT
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100355 def_bool y
356 depends on ACPI_SRAT
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100357
358config X86_SUMMIT_NUMA
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100359 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100360 depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH)
361
362config X86_CYCLONE_TIMER
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100363 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100364 depends on X86_32 && X86_SUMMIT || X86_GENERICARCH
365
366config ES7000_CLUSTERED_APIC
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100367 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100368 depends on SMP && X86_ES7000 && MPENTIUMIII
369
370source "arch/x86/Kconfig.cpu"
371
372config HPET_TIMER
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100373 def_bool X86_64
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100374 prompt "HPET Timer Support" if X86_32
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100375 help
376 Use the IA-PC HPET (High Precision Event Timer) to manage
377 time in preference to the PIT and RTC, if a HPET is
378 present.
379 HPET is the next generation timer replacing legacy 8254s.
380 The HPET provides a stable time base on SMP
381 systems, unlike the TSC, but it is more expensive to access,
382 as it is off-chip. You can find the HPET spec at
383 <http://www.intel.com/hardwaredesign/hpetspec.htm>.
384
385 You can safely choose Y here. However, HPET will only be
386 activated if the platform and the BIOS support this feature.
387 Otherwise the 8254 will be used for timing services.
388
389 Choose N to continue using the legacy 8254 timer.
390
391config HPET_EMULATE_RTC
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100392 def_bool y
Bernhard Wallef8f76482008-01-30 13:33:31 +0100393 depends on HPET_TIMER && (RTC=y || RTC=m)
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100394
395# Mark as embedded because too many people got it wrong.
396# The code disables itself when not needed.
397config GART_IOMMU
398 bool "GART IOMMU support" if EMBEDDED
399 default y
400 select SWIOTLB
401 select AGP
402 depends on X86_64 && PCI
403 help
404 Support for full DMA access of devices with 32bit memory access only
405 on systems with more than 3GB. This is usually needed for USB,
406 sound, many IDE/SATA chipsets and some other devices.
407 Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
408 based hardware IOMMU and a software bounce buffer based IOMMU used
409 on Intel systems and as fallback.
410 The code is only active when needed (enough memory and limited
411 device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
412 too.
413
414config CALGARY_IOMMU
415 bool "IBM Calgary IOMMU support"
416 select SWIOTLB
417 depends on X86_64 && PCI && EXPERIMENTAL
418 help
419 Support for hardware IOMMUs in IBM's xSeries x366 and x460
420 systems. Needed to run systems with more than 3GB of memory
421 properly with 32-bit PCI devices that do not support DAC
422 (Double Address Cycle). Calgary also supports bus level
423 isolation, where all DMAs pass through the IOMMU. This
424 prevents them from going anywhere except their intended
425 destination. This catches hard-to-find kernel bugs and
426 mis-behaving drivers and devices that do not use the DMA-API
427 properly to set up their DMA buffers. The IOMMU can be
428 turned off at boot time with the iommu=off parameter.
429 Normally the kernel will make the right choice by itself.
430 If unsure, say Y.
431
432config CALGARY_IOMMU_ENABLED_BY_DEFAULT
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100433 def_bool y
434 prompt "Should Calgary be enabled by default?"
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100435 depends on CALGARY_IOMMU
436 help
437 Should Calgary be enabled by default? if you choose 'y', Calgary
438 will be used (if it exists). If you choose 'n', Calgary will not be
439 used even if it exists. If you choose 'n' and would like to use
440 Calgary anyway, pass 'iommu=calgary' on the kernel command line.
441 If unsure, say Y.
442
443# need this always selected by IOMMU for the VIA workaround
444config SWIOTLB
445 bool
446 help
447 Support for software bounce buffers used on x86-64 systems
448 which don't have a hardware IOMMU (e.g. the current generation
449 of Intel's x86-64 CPUs). Using this PCI devices which can only
450 access 32-bits of memory can be used on systems with more than
451 3 GB of memory. If unsure, say Y.
452
453
454config NR_CPUS
455 int "Maximum number of CPUs (2-255)"
456 range 2 255
457 depends on SMP
458 default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
459 default "8"
460 help
461 This allows you to specify the maximum number of CPUs which this
462 kernel will support. The maximum supported value is 255 and the
463 minimum value which makes sense is 2.
464
465 This is purely to save memory - each supported CPU adds
466 approximately eight kilobytes to the kernel image.
467
468config SCHED_SMT
469 bool "SMT (Hyperthreading) scheduler support"
470 depends on (X86_64 && SMP) || (X86_32 && X86_HT)
471 help
472 SMT scheduler support improves the CPU scheduler's decision making
473 when dealing with Intel Pentium 4 chips with HyperThreading at a
474 cost of slightly increased overhead in some places. If unsure say
475 N here.
476
477config SCHED_MC
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100478 def_bool y
479 prompt "Multi-core scheduler support"
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100480 depends on (X86_64 && SMP) || (X86_32 && X86_HT)
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100481 help
482 Multi-core scheduler support improves the CPU scheduler's decision
483 making when dealing with multi-core CPU chips at a cost of slightly
484 increased overhead in some places. If unsure say N here.
485
486source "kernel/Kconfig.preempt"
487
488config X86_UP_APIC
489 bool "Local APIC support on uniprocessors"
490 depends on X86_32 && !SMP && !(X86_VISWS || X86_VOYAGER || X86_GENERICARCH)
491 help
492 A local APIC (Advanced Programmable Interrupt Controller) is an
493 integrated interrupt controller in the CPU. If you have a single-CPU
494 system which has a processor with a local APIC, you can say Y here to
495 enable and use it. If you say Y here even though your machine doesn't
496 have a local APIC, then the kernel will still run with no slowdown at
497 all. The local APIC supports CPU-generated self-interrupts (timer,
498 performance counters), and the NMI watchdog which detects hard
499 lockups.
500
501config X86_UP_IOAPIC
502 bool "IO-APIC support on uniprocessors"
503 depends on X86_UP_APIC
504 help
505 An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
506 SMP-capable replacement for PC-style interrupt controllers. Most
507 SMP systems and many recent uniprocessor systems have one.
508
509 If you have a single-CPU system with an IO-APIC, you can say Y here
510 to use it. If you say Y here even though your machine doesn't have
511 an IO-APIC, then the kernel will still run with no slowdown at all.
512
513config X86_LOCAL_APIC
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100514 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100515 depends on X86_64 || (X86_32 && (X86_UP_APIC || ((X86_VISWS || SMP) && !X86_VOYAGER) || X86_GENERICARCH))
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100516
517config X86_IO_APIC
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100518 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100519 depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !(X86_VISWS || X86_VOYAGER)) || X86_GENERICARCH))
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100520
521config X86_VISWS_APIC
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100522 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100523 depends on X86_32 && X86_VISWS
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100524
525config X86_MCE
526 bool "Machine Check Exception"
527 depends on !X86_VOYAGER
528 ---help---
529 Machine Check Exception support allows the processor to notify the
530 kernel if it detects a problem (e.g. overheating, component failure).
531 The action the kernel takes depends on the severity of the problem,
532 ranging from a warning message on the console, to halting the machine.
533 Your processor must be a Pentium or newer to support this - check the
534 flags in /proc/cpuinfo for mce. Note that some older Pentium systems
535 have a design flaw which leads to false MCE events - hence MCE is
536 disabled on all P5 processors, unless explicitly enabled with "mce"
537 as a boot argument. Similarly, if MCE is built in and creates a
538 problem on some new non-standard machine, you can boot with "nomce"
539 to disable it. MCE support simply ignores non-MCE processors like
540 the 386 and 486, so nearly everyone can say Y here.
541
542config X86_MCE_INTEL
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100543 def_bool y
544 prompt "Intel MCE features"
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100545 depends on X86_64 && X86_MCE && X86_LOCAL_APIC
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100546 help
547 Additional support for intel specific MCE features such as
548 the thermal monitor.
549
550config X86_MCE_AMD
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100551 def_bool y
552 prompt "AMD MCE features"
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100553 depends on X86_64 && X86_MCE && X86_LOCAL_APIC
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100554 help
555 Additional support for AMD specific MCE features such as
556 the DRAM Error Threshold.
557
558config X86_MCE_NONFATAL
559 tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
560 depends on X86_32 && X86_MCE
561 help
562 Enabling this feature starts a timer that triggers every 5 seconds which
563 will look at the machine check registers to see if anything happened.
564 Non-fatal problems automatically get corrected (but still logged).
565 Disable this if you don't want to see these messages.
566 Seeing the messages this option prints out may be indicative of dying
567 or out-of-spec (ie, overclocked) hardware.
568 This option only does something on certain CPUs.
569 (AMD Athlon/Duron and Intel Pentium 4)
570
571config X86_MCE_P4THERMAL
572 bool "check for P4 thermal throttling interrupt."
573 depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP) && !X86_VISWS
574 help
575 Enabling this feature will cause a message to be printed when the P4
576 enters thermal throttling.
577
578config VM86
579 bool "Enable VM86 support" if EMBEDDED
580 default y
581 depends on X86_32
582 help
583 This option is required by programs like DOSEMU to run 16-bit legacy
584 code on X86 processors. It also may be needed by software like
585 XFree86 to initialize some video cards via BIOS. Disabling this
586 option saves about 6k.
587
588config TOSHIBA
589 tristate "Toshiba Laptop support"
590 depends on X86_32
591 ---help---
592 This adds a driver to safely access the System Management Mode of
593 the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
594 not work on models with a Phoenix BIOS. The System Management Mode
595 is used to set the BIOS and power saving options on Toshiba portables.
596
597 For information on utilities to make use of this driver see the
598 Toshiba Linux utilities web site at:
599 <http://www.buzzard.org.uk/toshiba/>.
600
601 Say Y if you intend to run this kernel on a Toshiba portable.
602 Say N otherwise.
603
604config I8K
605 tristate "Dell laptop support"
606 depends on X86_32
607 ---help---
608 This adds a driver to safely access the System Management Mode
609 of the CPU on the Dell Inspiron 8000. The System Management Mode
610 is used to read cpu temperature and cooling fan status and to
611 control the fans on the I8K portables.
612
613 This driver has been tested only on the Inspiron 8000 but it may
614 also work with other Dell laptops. You can force loading on other
615 models by passing the parameter `force=1' to the module. Use at
616 your own risk.
617
618 For information on utilities to make use of this driver see the
619 I8K Linux utilities web site at:
620 <http://people.debian.org/~dz/i8k/>
621
622 Say Y if you intend to run this kernel on a Dell Inspiron 8000.
623 Say N otherwise.
624
625config X86_REBOOTFIXUPS
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100626 def_bool n
627 prompt "Enable X86 board specific fixups for reboot"
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100628 depends on X86_32 && X86
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100629 ---help---
630 This enables chipset and/or board specific fixups to be done
631 in order to get reboot to work correctly. This is only needed on
632 some combinations of hardware and BIOS. The symptom, for which
633 this config is intended, is when reboot ends with a stalled/hung
634 system.
635
636 Currently, the only fixup is for the Geode machines using
637 CS5530A and CS5536 chipsets.
638
639 Say Y if you want to enable the fixup. Currently, it's safe to
640 enable this option even if you don't need it.
641 Say N otherwise.
642
643config MICROCODE
644 tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
645 select FW_LOADER
646 ---help---
647 If you say Y here, you will be able to update the microcode on
648 Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
649 Pentium III, Pentium 4, Xeon etc. You will obviously need the
650 actual microcode binary data itself which is not shipped with the
651 Linux kernel.
652
653 For latest news and information on obtaining all the required
654 ingredients for this driver, check:
655 <http://www.urbanmyth.org/microcode/>.
656
657 To compile this driver as a module, choose M here: the
658 module will be called microcode.
659
660config MICROCODE_OLD_INTERFACE
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100661 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100662 depends on MICROCODE
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100663
664config X86_MSR
665 tristate "/dev/cpu/*/msr - Model-specific register support"
666 help
667 This device gives privileged processes access to the x86
668 Model-Specific Registers (MSRs). It is a character device with
669 major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
670 MSR accesses are directed to a specific CPU on multi-processor
671 systems.
672
673config X86_CPUID
674 tristate "/dev/cpu/*/cpuid - CPU information support"
675 help
676 This device gives processes access to the x86 CPUID instruction to
677 be executed on a specific processor. It is a character device
678 with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
679 /dev/cpu/31/cpuid.
680
681choice
682 prompt "High Memory Support"
683 default HIGHMEM4G if !X86_NUMAQ
684 default HIGHMEM64G if X86_NUMAQ
685 depends on X86_32
686
687config NOHIGHMEM
688 bool "off"
689 depends on !X86_NUMAQ
690 ---help---
691 Linux can use up to 64 Gigabytes of physical memory on x86 systems.
692 However, the address space of 32-bit x86 processors is only 4
693 Gigabytes large. That means that, if you have a large amount of
694 physical memory, not all of it can be "permanently mapped" by the
695 kernel. The physical memory that's not permanently mapped is called
696 "high memory".
697
698 If you are compiling a kernel which will never run on a machine with
699 more than 1 Gigabyte total physical RAM, answer "off" here (default
700 choice and suitable for most users). This will result in a "3GB/1GB"
701 split: 3GB are mapped so that each process sees a 3GB virtual memory
702 space and the remaining part of the 4GB virtual memory space is used
703 by the kernel to permanently map as much physical memory as
704 possible.
705
706 If the machine has between 1 and 4 Gigabytes physical RAM, then
707 answer "4GB" here.
708
709 If more than 4 Gigabytes is used then answer "64GB" here. This
710 selection turns Intel PAE (Physical Address Extension) mode on.
711 PAE implements 3-level paging on IA32 processors. PAE is fully
712 supported by Linux, PAE mode is implemented on all recent Intel
713 processors (Pentium Pro and better). NOTE: If you say "64GB" here,
714 then the kernel will not boot on CPUs that don't support PAE!
715
716 The actual amount of total physical memory will either be
717 auto detected or can be forced by using a kernel command line option
718 such as "mem=256M". (Try "man bootparam" or see the documentation of
719 your boot loader (lilo or loadlin) about how to pass options to the
720 kernel at boot time.)
721
722 If unsure, say "off".
723
724config HIGHMEM4G
725 bool "4GB"
726 depends on !X86_NUMAQ
727 help
728 Select this if you have a 32-bit processor and between 1 and 4
729 gigabytes of physical RAM.
730
731config HIGHMEM64G
732 bool "64GB"
733 depends on !M386 && !M486
734 select X86_PAE
735 help
736 Select this if you have a 32-bit processor and more than 4
737 gigabytes of physical RAM.
738
739endchoice
740
741choice
742 depends on EXPERIMENTAL
743 prompt "Memory split" if EMBEDDED
744 default VMSPLIT_3G
745 depends on X86_32
746 help
747 Select the desired split between kernel and user memory.
748
749 If the address range available to the kernel is less than the
750 physical memory installed, the remaining memory will be available
751 as "high memory". Accessing high memory is a little more costly
752 than low memory, as it needs to be mapped into the kernel first.
753 Note that increasing the kernel address space limits the range
754 available to user programs, making the address space there
755 tighter. Selecting anything other than the default 3G/1G split
756 will also likely make your kernel incompatible with binary-only
757 kernel modules.
758
759 If you are not absolutely sure what you are doing, leave this
760 option alone!
761
762 config VMSPLIT_3G
763 bool "3G/1G user/kernel split"
764 config VMSPLIT_3G_OPT
765 depends on !X86_PAE
766 bool "3G/1G user/kernel split (for full 1G low memory)"
767 config VMSPLIT_2G
768 bool "2G/2G user/kernel split"
769 config VMSPLIT_2G_OPT
770 depends on !X86_PAE
771 bool "2G/2G user/kernel split (for full 2G low memory)"
772 config VMSPLIT_1G
773 bool "1G/3G user/kernel split"
774endchoice
775
776config PAGE_OFFSET
777 hex
778 default 0xB0000000 if VMSPLIT_3G_OPT
779 default 0x80000000 if VMSPLIT_2G
780 default 0x78000000 if VMSPLIT_2G_OPT
781 default 0x40000000 if VMSPLIT_1G
782 default 0xC0000000
783 depends on X86_32
784
785config HIGHMEM
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100786 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100787 depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100788
789config X86_PAE
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100790 def_bool n
791 prompt "PAE (Physical Address Extension) Support"
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100792 depends on X86_32 && !HIGHMEM4G
793 select RESOURCES_64BIT
794 help
795 PAE is required for NX support, and furthermore enables
796 larger swapspace support for non-overcommit purposes. It
797 has the cost of more pagetable lookup overhead, and also
798 consumes more pagetable space per process.
799
800# Common NUMA Features
801config NUMA
802 bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
803 depends on SMP
804 depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
805 default n if X86_PC
806 default y if (X86_NUMAQ || X86_SUMMIT)
807 help
808 Enable NUMA (Non Uniform Memory Access) support.
809 The kernel will try to allocate memory used by a CPU on the
810 local memory controller of the CPU and add some more
811 NUMA awareness to the kernel.
812
813 For i386 this is currently highly experimental and should be only
814 used for kernel development. It might also cause boot failures.
815 For x86_64 this is recommended on all multiprocessor Opteron systems.
816 If the system is EM64T, you should say N unless your system is
817 EM64T NUMA.
818
819comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
820 depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
821
822config K8_NUMA
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100823 def_bool y
824 prompt "Old style AMD Opteron NUMA detection"
825 depends on X86_64 && NUMA && PCI
826 help
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100827 Enable K8 NUMA node topology detection. You should say Y here if
828 you have a multi processor AMD K8 system. This uses an old
829 method to read the NUMA configuration directly from the builtin
830 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
831 instead, which also takes priority if both are compiled in.
832
833config X86_64_ACPI_NUMA
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100834 def_bool y
835 prompt "ACPI NUMA detection"
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100836 depends on X86_64 && NUMA && ACPI && PCI
837 select ACPI_NUMA
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100838 help
839 Enable ACPI SRAT based node topology detection.
840
841config NUMA_EMU
842 bool "NUMA emulation"
843 depends on X86_64 && NUMA
844 help
845 Enable NUMA emulation. A flat machine will be split
846 into virtual nodes when booted with "numa=fake=N", where N is the
847 number of nodes. This is only useful for debugging.
848
849config NODES_SHIFT
850 int
travis@sgi.com43238382008-01-30 13:33:25 +0100851 range 1 15 if X86_64
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100852 default "6" if X86_64
853 default "4" if X86_NUMAQ
854 default "3"
855 depends on NEED_MULTIPLE_NODES
856
857config HAVE_ARCH_BOOTMEM_NODE
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100858 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100859 depends on X86_32 && NUMA
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100860
861config ARCH_HAVE_MEMORY_PRESENT
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100862 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100863 depends on X86_32 && DISCONTIGMEM
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100864
865config NEED_NODE_MEMMAP_SIZE
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100866 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100867 depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100868
869config HAVE_ARCH_ALLOC_REMAP
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100870 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100871 depends on X86_32 && NUMA
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100872
873config ARCH_FLATMEM_ENABLE
874 def_bool y
Mel Gorman409a7b82008-01-30 13:33:25 +0100875 depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC && !NUMA
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100876
877config ARCH_DISCONTIGMEM_ENABLE
878 def_bool y
Christoph Lameterb2632952008-01-30 13:30:47 +0100879 depends on NUMA && X86_32
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100880
881config ARCH_DISCONTIGMEM_DEFAULT
882 def_bool y
Christoph Lameterb2632952008-01-30 13:30:47 +0100883 depends on NUMA && X86_32
884
885config ARCH_SPARSEMEM_DEFAULT
886 def_bool y
887 depends on X86_64
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100888
889config ARCH_SPARSEMEM_ENABLE
890 def_bool y
Christoph Lameterb2632952008-01-30 13:30:47 +0100891 depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC)
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100892 select SPARSEMEM_STATIC if X86_32
893 select SPARSEMEM_VMEMMAP_ENABLE if X86_64
894
895config ARCH_SELECT_MEMORY_MODEL
896 def_bool y
Christoph Lameterb2632952008-01-30 13:30:47 +0100897 depends on ARCH_SPARSEMEM_ENABLE
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100898
899config ARCH_MEMORY_PROBE
900 def_bool X86_64
901 depends on MEMORY_HOTPLUG
902
903source "mm/Kconfig"
904
905config HIGHPTE
906 bool "Allocate 3rd-level pagetables from highmem"
907 depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
908 help
909 The VM uses one page table entry for each page of physical memory.
910 For systems with a lot of RAM, this can be wasteful of precious
911 low memory. Setting this option will put user-space page table
912 entries in high memory.
913
914config MATH_EMULATION
915 bool
916 prompt "Math emulation" if X86_32
917 ---help---
918 Linux can emulate a math coprocessor (used for floating point
919 operations) if you don't have one. 486DX and Pentium processors have
920 a math coprocessor built in, 486SX and 386 do not, unless you added
921 a 487DX or 387, respectively. (The messages during boot time can
922 give you some hints here ["man dmesg"].) Everyone needs either a
923 coprocessor or this emulation.
924
925 If you don't have a math coprocessor, you need to say Y here; if you
926 say Y here even though you have a coprocessor, the coprocessor will
927 be used nevertheless. (This behavior can be changed with the kernel
928 command line option "no387", which comes handy if your coprocessor
929 is broken. Try "man bootparam" or see the documentation of your boot
930 loader (lilo or loadlin) about how to pass options to the kernel at
931 boot time.) This means that it is a good idea to say Y here if you
932 intend to use this kernel on different machines.
933
934 More information about the internals of the Linux math coprocessor
935 emulation can be found in <file:arch/x86/math-emu/README>.
936
937 If you are not sure, say Y; apart from resulting in a 66 KB bigger
938 kernel, it won't hurt.
939
940config MTRR
941 bool "MTRR (Memory Type Range Register) support"
942 ---help---
943 On Intel P6 family processors (Pentium Pro, Pentium II and later)
944 the Memory Type Range Registers (MTRRs) may be used to control
945 processor access to memory ranges. This is most useful if you have
946 a video (VGA) card on a PCI or AGP bus. Enabling write-combining
947 allows bus write transfers to be combined into a larger transfer
948 before bursting over the PCI/AGP bus. This can increase performance
949 of image write operations 2.5 times or more. Saying Y here creates a
950 /proc/mtrr file which may be used to manipulate your processor's
951 MTRRs. Typically the X server should use this.
952
953 This code has a reasonably generic interface so that similar
954 control registers on other processors can be easily supported
955 as well:
956
957 The Cyrix 6x86, 6x86MX and M II processors have Address Range
958 Registers (ARRs) which provide a similar functionality to MTRRs. For
959 these, the ARRs are used to emulate the MTRRs.
960 The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
961 MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
962 write-combining. All of these processors are supported by this code
963 and it makes sense to say Y here if you have one of them.
964
965 Saying Y here also fixes a problem with buggy SMP BIOSes which only
966 set the MTRRs for the boot CPU and not for the secondary CPUs. This
967 can lead to all sorts of problems, so it's good to say Y here.
968
969 You can safely say Y even if your machine doesn't have MTRRs, you'll
970 just add about 9 KB to your kernel.
971
972 See <file:Documentation/mtrr.txt> for more information.
973
974config EFI
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100975 def_bool n
Huang, Ying8b2cb7a2008-01-30 13:32:11 +0100976 prompt "EFI runtime service support"
Huang, Ying5b836832008-01-30 13:31:19 +0100977 depends on ACPI
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100978 ---help---
Huang, Ying8b2cb7a2008-01-30 13:32:11 +0100979 This enables the kernel to use EFI runtime services that are
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100980 available (such as the EFI variable services).
981
Huang, Ying8b2cb7a2008-01-30 13:32:11 +0100982 This option is only useful on systems that have EFI firmware.
983 In addition, you should use the latest ELILO loader available
984 at <http://elilo.sourceforge.net> in order to take advantage
985 of EFI runtime services. However, even with this option, the
986 resultant kernel should continue to boot on existing non-EFI
987 platforms.
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100988
989config IRQBALANCE
Harvey Harrison3c2362e2008-01-30 13:31:03 +0100990 def_bool y
991 prompt "Enable kernel irq balancing"
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100992 depends on X86_32 && SMP && X86_IO_APIC
Sam Ravnborg506f1d02007-11-09 21:56:54 +0100993 help
994 The default yes will allow the kernel to do irq load balancing.
995 Saying no will keep the kernel from doing irq load balancing.
996
997# turning this on wastes a bunch of space.
998# Summit needs it only when NUMA is on
999config BOOT_IOREMAP
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001000 def_bool y
Sam Ravnborg506f1d02007-11-09 21:56:54 +01001001 depends on X86_32 && (((X86_SUMMIT || X86_GENERICARCH) && NUMA) || (X86 && EFI))
Sam Ravnborg506f1d02007-11-09 21:56:54 +01001002
1003config SECCOMP
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001004 def_bool y
1005 prompt "Enable seccomp to safely compute untrusted bytecode"
Sam Ravnborg506f1d02007-11-09 21:56:54 +01001006 depends on PROC_FS
Sam Ravnborg506f1d02007-11-09 21:56:54 +01001007 help
1008 This kernel feature is useful for number crunching applications
1009 that may need to compute untrusted bytecode during their
1010 execution. By using pipes or other transports made available to
1011 the process as file descriptors supporting the read/write
1012 syscalls, it's possible to isolate those applications in
1013 their own address space using seccomp. Once seccomp is
1014 enabled via /proc/<pid>/seccomp, it cannot be disabled
1015 and the task is only allowed to execute a few safe syscalls
1016 defined by each seccomp mode.
1017
1018 If unsure, say Y. Only embedded should say N here.
1019
1020config CC_STACKPROTECTOR
1021 bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
1022 depends on X86_64 && EXPERIMENTAL
1023 help
1024 This option turns on the -fstack-protector GCC feature. This
1025 feature puts, at the beginning of critical functions, a canary
1026 value on the stack just before the return address, and validates
1027 the value just before actually returning. Stack based buffer
1028 overflows (that need to overwrite this return address) now also
1029 overwrite the canary, which gets detected and the attack is then
1030 neutralized via a kernel panic.
1031
1032 This feature requires gcc version 4.2 or above, or a distribution
1033 gcc with the feature backported. Older versions are automatically
1034 detected and for those versions, this configuration option is ignored.
1035
1036config CC_STACKPROTECTOR_ALL
1037 bool "Use stack-protector for all functions"
1038 depends on CC_STACKPROTECTOR
1039 help
1040 Normally, GCC only inserts the canary value protection for
1041 functions that use large-ish on-stack buffers. By enabling
1042 this option, GCC will be asked to do this for ALL functions.
1043
1044source kernel/Kconfig.hz
1045
1046config KEXEC
1047 bool "kexec system call"
1048 help
1049 kexec is a system call that implements the ability to shutdown your
1050 current kernel, and to start another kernel. It is like a reboot
1051 but it is independent of the system firmware. And like a reboot
1052 you can start any kernel with it, not just Linux.
1053
1054 The name comes from the similarity to the exec system call.
1055
1056 It is an ongoing process to be certain the hardware in a machine
1057 is properly shutdown, so do not be surprised if this code does not
1058 initially work for you. It may help to enable device hotplugging
1059 support. As of this writing the exact hardware interface is
1060 strongly in flux, so no good recommendation can be made.
1061
1062config CRASH_DUMP
1063 bool "kernel crash dumps (EXPERIMENTAL)"
1064 depends on EXPERIMENTAL
1065 depends on X86_64 || (X86_32 && HIGHMEM)
1066 help
1067 Generate crash dump after being started by kexec.
1068 This should be normally only set in special crash dump kernels
1069 which are loaded in the main kernel with kexec-tools into
1070 a specially reserved region and then later executed after
1071 a crash by kdump/kexec. The crash dump kernel must be compiled
1072 to a memory address not used by the main kernel or BIOS using
1073 PHYSICAL_START, or it must be built as a relocatable image
1074 (CONFIG_RELOCATABLE=y).
1075 For more details see Documentation/kdump/kdump.txt
1076
1077config PHYSICAL_START
1078 hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
1079 default "0x1000000" if X86_NUMAQ
1080 default "0x200000" if X86_64
1081 default "0x100000"
1082 help
1083 This gives the physical address where the kernel is loaded.
1084
1085 If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
1086 bzImage will decompress itself to above physical address and
1087 run from there. Otherwise, bzImage will run from the address where
1088 it has been loaded by the boot loader and will ignore above physical
1089 address.
1090
1091 In normal kdump cases one does not have to set/change this option
1092 as now bzImage can be compiled as a completely relocatable image
1093 (CONFIG_RELOCATABLE=y) and be used to load and run from a different
1094 address. This option is mainly useful for the folks who don't want
1095 to use a bzImage for capturing the crash dump and want to use a
1096 vmlinux instead. vmlinux is not relocatable hence a kernel needs
1097 to be specifically compiled to run from a specific memory area
1098 (normally a reserved region) and this option comes handy.
1099
1100 So if you are using bzImage for capturing the crash dump, leave
1101 the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
1102 Otherwise if you plan to use vmlinux for capturing the crash dump
1103 change this value to start of the reserved region (Typically 16MB
1104 0x1000000). In other words, it can be set based on the "X" value as
1105 specified in the "crashkernel=YM@XM" command line boot parameter
1106 passed to the panic-ed kernel. Typically this parameter is set as
1107 crashkernel=64M@16M. Please take a look at
1108 Documentation/kdump/kdump.txt for more details about crash dumps.
1109
1110 Usage of bzImage for capturing the crash dump is recommended as
1111 one does not have to build two kernels. Same kernel can be used
1112 as production kernel and capture kernel. Above option should have
1113 gone away after relocatable bzImage support is introduced. But it
1114 is present because there are users out there who continue to use
1115 vmlinux for dump capture. This option should go away down the
1116 line.
1117
1118 Don't change this unless you know what you are doing.
1119
1120config RELOCATABLE
1121 bool "Build a relocatable kernel (EXPERIMENTAL)"
1122 depends on EXPERIMENTAL
1123 help
1124 This builds a kernel image that retains relocation information
1125 so it can be loaded someplace besides the default 1MB.
1126 The relocations tend to make the kernel binary about 10% larger,
1127 but are discarded at runtime.
1128
1129 One use is for the kexec on panic case where the recovery kernel
1130 must live at a different physical address than the primary
1131 kernel.
1132
1133 Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
1134 it has been loaded at and the compile time physical address
1135 (CONFIG_PHYSICAL_START) is ignored.
1136
1137config PHYSICAL_ALIGN
1138 hex
1139 prompt "Alignment value to which kernel should be aligned" if X86_32
1140 default "0x100000" if X86_32
1141 default "0x200000" if X86_64
1142 range 0x2000 0x400000
1143 help
1144 This value puts the alignment restrictions on physical address
1145 where kernel is loaded and run from. Kernel is compiled for an
1146 address which meets above alignment restriction.
1147
1148 If bootloader loads the kernel at a non-aligned address and
1149 CONFIG_RELOCATABLE is set, kernel will move itself to nearest
1150 address aligned to above value and run from there.
1151
1152 If bootloader loads the kernel at a non-aligned address and
1153 CONFIG_RELOCATABLE is not set, kernel will ignore the run time
1154 load address and decompress itself to the address it has been
1155 compiled for and run from there. The address for which kernel is
1156 compiled already meets above alignment restrictions. Hence the
1157 end result is that kernel runs from a physical address meeting
1158 above alignment restrictions.
1159
1160 Don't change this unless you know what you are doing.
1161
1162config HOTPLUG_CPU
1163 bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
1164 depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
1165 ---help---
1166 Say Y here to experiment with turning CPUs off and on, and to
1167 enable suspend on SMP systems. CPUs can be controlled through
1168 /sys/devices/system/cpu.
1169 Say N if you want to disable CPU hotplug and don't need to
1170 suspend.
1171
1172config COMPAT_VDSO
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001173 def_bool y
1174 prompt "Compat VDSO support"
Roland McGrathaf65d642008-01-30 13:30:43 +01001175 depends on X86_32 || IA32_EMULATION
Sam Ravnborg506f1d02007-11-09 21:56:54 +01001176 help
Roland McGrathaf65d642008-01-30 13:30:43 +01001177 Map the 32-bit VDSO to the predictable old-style address too.
Sam Ravnborg506f1d02007-11-09 21:56:54 +01001178 ---help---
1179 Say N here if you are running a sufficiently recent glibc
1180 version (2.3.3 or later), to remove the high-mapped
1181 VDSO mapping and to exclusively use the randomized VDSO.
1182
1183 If unsure, say Y.
1184
1185endmenu
1186
1187config ARCH_ENABLE_MEMORY_HOTPLUG
1188 def_bool y
1189 depends on X86_64 || (X86_32 && HIGHMEM)
1190
Sam Ravnborg506f1d02007-11-09 21:56:54 +01001191config HAVE_ARCH_EARLY_PFN_TO_NID
1192 def_bool X86_64
1193 depends on NUMA
1194
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001195menu "Power management options"
1196 depends on !X86_VOYAGER
1197
1198config ARCH_HIBERNATION_HEADER
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001199 def_bool y
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001200 depends on X86_64 && HIBERNATION
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001201
1202source "kernel/power/Kconfig"
1203
1204source "drivers/acpi/Kconfig"
1205
Andi Kleena6b68072008-01-30 13:32:49 +01001206config X86_APM_BOOT
1207 bool
1208 default y
1209 depends on APM || APM_MODULE
1210
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001211menuconfig APM
1212 tristate "APM (Advanced Power Management) BIOS support"
1213 depends on X86_32 && PM_SLEEP && !X86_VISWS
1214 ---help---
1215 APM is a BIOS specification for saving power using several different
1216 techniques. This is mostly useful for battery powered laptops with
1217 APM compliant BIOSes. If you say Y here, the system time will be
1218 reset after a RESUME operation, the /proc/apm device will provide
1219 battery status information, and user-space programs will receive
1220 notification of APM "events" (e.g. battery status change).
1221
1222 If you select "Y" here, you can disable actual use of the APM
1223 BIOS by passing the "apm=off" option to the kernel at boot time.
1224
1225 Note that the APM support is almost completely disabled for
1226 machines with more than one CPU.
1227
1228 In order to use APM, you will need supporting software. For location
1229 and more information, read <file:Documentation/pm.txt> and the
1230 Battery Powered Linux mini-HOWTO, available from
1231 <http://www.tldp.org/docs.html#howto>.
1232
1233 This driver does not spin down disk drives (see the hdparm(8)
1234 manpage ("man 8 hdparm") for that), and it doesn't turn off
1235 VESA-compliant "green" monitors.
1236
1237 This driver does not support the TI 4000M TravelMate and the ACER
1238 486/DX4/75 because they don't have compliant BIOSes. Many "green"
1239 desktop machines also don't have compliant BIOSes, and this driver
1240 may cause those machines to panic during the boot phase.
1241
1242 Generally, if you don't have a battery in your machine, there isn't
1243 much point in using this driver and you should say N. If you get
1244 random kernel OOPSes or reboots that don't seem to be related to
1245 anything, try disabling/enabling this option (or disabling/enabling
1246 APM in your BIOS).
1247
1248 Some other things you should try when experiencing seemingly random,
1249 "weird" problems:
1250
1251 1) make sure that you have enough swap space and that it is
1252 enabled.
1253 2) pass the "no-hlt" option to the kernel
1254 3) switch on floating point emulation in the kernel and pass
1255 the "no387" option to the kernel
1256 4) pass the "floppy=nodma" option to the kernel
1257 5) pass the "mem=4M" option to the kernel (thereby disabling
1258 all but the first 4 MB of RAM)
1259 6) make sure that the CPU is not over clocked.
1260 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
1261 8) disable the cache from your BIOS settings
1262 9) install a fan for the video card or exchange video RAM
1263 10) install a better fan for the CPU
1264 11) exchange RAM chips
1265 12) exchange the motherboard.
1266
1267 To compile this driver as a module, choose M here: the
1268 module will be called apm.
1269
1270if APM
1271
1272config APM_IGNORE_USER_SUSPEND
1273 bool "Ignore USER SUSPEND"
1274 help
1275 This option will ignore USER SUSPEND requests. On machines with a
1276 compliant APM BIOS, you want to say N. However, on the NEC Versa M
1277 series notebooks, it is necessary to say Y because of a BIOS bug.
1278
1279config APM_DO_ENABLE
1280 bool "Enable PM at boot time"
1281 ---help---
1282 Enable APM features at boot time. From page 36 of the APM BIOS
1283 specification: "When disabled, the APM BIOS does not automatically
1284 power manage devices, enter the Standby State, enter the Suspend
1285 State, or take power saving steps in response to CPU Idle calls."
1286 This driver will make CPU Idle calls when Linux is idle (unless this
1287 feature is turned off -- see "Do CPU IDLE calls", below). This
1288 should always save battery power, but more complicated APM features
1289 will be dependent on your BIOS implementation. You may need to turn
1290 this option off if your computer hangs at boot time when using APM
1291 support, or if it beeps continuously instead of suspending. Turn
1292 this off if you have a NEC UltraLite Versa 33/C or a Toshiba
1293 T400CDT. This is off by default since most machines do fine without
1294 this feature.
1295
1296config APM_CPU_IDLE
1297 bool "Make CPU Idle calls when idle"
1298 help
1299 Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
1300 On some machines, this can activate improved power savings, such as
1301 a slowed CPU clock rate, when the machine is idle. These idle calls
1302 are made after the idle loop has run for some length of time (e.g.,
1303 333 mS). On some machines, this will cause a hang at boot time or
1304 whenever the CPU becomes idle. (On machines with more than one CPU,
1305 this option does nothing.)
1306
1307config APM_DISPLAY_BLANK
1308 bool "Enable console blanking using APM"
1309 help
1310 Enable console blanking using the APM. Some laptops can use this to
1311 turn off the LCD backlight when the screen blanker of the Linux
1312 virtual console blanks the screen. Note that this is only used by
1313 the virtual console screen blanker, and won't turn off the backlight
1314 when using the X Window system. This also doesn't have anything to
1315 do with your VESA-compliant power-saving monitor. Further, this
1316 option doesn't work for all laptops -- it might not turn off your
1317 backlight at all, or it might print a lot of errors to the console,
1318 especially if you are using gpm.
1319
1320config APM_ALLOW_INTS
1321 bool "Allow interrupts during APM BIOS calls"
1322 help
1323 Normally we disable external interrupts while we are making calls to
1324 the APM BIOS as a measure to lessen the effects of a badly behaving
1325 BIOS implementation. The BIOS should reenable interrupts if it
1326 needs to. Unfortunately, some BIOSes do not -- especially those in
1327 many of the newer IBM Thinkpads. If you experience hangs when you
1328 suspend, try setting this to Y. Otherwise, say N.
1329
1330config APM_REAL_MODE_POWER_OFF
1331 bool "Use real mode APM BIOS call to power off"
1332 help
1333 Use real mode APM BIOS calls to switch off the computer. This is
1334 a work-around for a number of buggy BIOSes. Switch this option on if
1335 your computer crashes instead of powering off properly.
1336
1337endif # APM
1338
1339source "arch/x86/kernel/cpu/cpufreq/Kconfig"
1340
1341source "drivers/cpuidle/Kconfig"
1342
1343endmenu
1344
1345
1346menu "Bus options (PCI etc.)"
1347
1348config PCI
1349 bool "PCI support" if !X86_VISWS
1350 depends on !X86_VOYAGER
Adrian Bunk1c858082008-01-30 13:32:32 +01001351 default y
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001352 select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
1353 help
1354 Find out whether you have a PCI motherboard. PCI is the name of a
1355 bus system, i.e. the way the CPU talks to the other stuff inside
1356 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1357 VESA. If you have PCI, say Y, otherwise N.
1358
1359 The PCI-HOWTO, available from
1360 <http://www.tldp.org/docs.html#howto>, contains valuable
1361 information about which PCI hardware does work under Linux and which
1362 doesn't.
1363
1364choice
1365 prompt "PCI access mode"
1366 depends on X86_32 && PCI && !X86_VISWS
1367 default PCI_GOANY
1368 ---help---
1369 On PCI systems, the BIOS can be used to detect the PCI devices and
1370 determine their configuration. However, some old PCI motherboards
1371 have BIOS bugs and may crash if this is done. Also, some embedded
1372 PCI-based systems don't have any BIOS at all. Linux can also try to
1373 detect the PCI hardware directly without using the BIOS.
1374
1375 With this option, you can specify how Linux should detect the
1376 PCI devices. If you choose "BIOS", the BIOS will be used,
1377 if you choose "Direct", the BIOS won't be used, and if you
1378 choose "MMConfig", then PCI Express MMCONFIG will be used.
1379 If you choose "Any", the kernel will try MMCONFIG, then the
1380 direct access method and falls back to the BIOS if that doesn't
1381 work. If unsure, go with the default, which is "Any".
1382
1383config PCI_GOBIOS
1384 bool "BIOS"
1385
1386config PCI_GOMMCONFIG
1387 bool "MMConfig"
1388
1389config PCI_GODIRECT
1390 bool "Direct"
1391
1392config PCI_GOANY
1393 bool "Any"
1394
1395endchoice
1396
1397config PCI_BIOS
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001398 def_bool y
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001399 depends on X86_32 && !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001400
1401# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
1402config PCI_DIRECT
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001403 def_bool y
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001404 depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001405
1406config PCI_MMCONFIG
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001407 def_bool y
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001408 depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001409
1410config PCI_DOMAINS
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001411 def_bool y
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001412 depends on PCI
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001413
1414config PCI_MMCONFIG
1415 bool "Support mmconfig PCI config space access"
1416 depends on X86_64 && PCI && ACPI
1417
1418config DMAR
1419 bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
1420 depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL
1421 help
1422 DMA remapping (DMAR) devices support enables independent address
1423 translations for Direct Memory Access (DMA) from devices.
1424 These DMA remapping devices are reported via ACPI tables
1425 and include PCI device scope covered by these DMA
1426 remapping devices.
1427
1428config DMAR_GFX_WA
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001429 def_bool y
1430 prompt "Support for Graphics workaround"
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001431 depends on DMAR
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001432 help
1433 Current Graphics drivers tend to use physical address
1434 for DMA and avoid using DMA APIs. Setting this config
1435 option permits the IOMMU driver to set a unity map for
1436 all the OS-visible memory. Hence the driver can continue
1437 to use physical addresses for DMA.
1438
1439config DMAR_FLOPPY_WA
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001440 def_bool y
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001441 depends on DMAR
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001442 help
1443 Floppy disk drivers are know to bypass DMA API calls
1444 thereby failing to work when IOMMU is enabled. This
1445 workaround will setup a 1:1 mapping for the first
1446 16M to make floppy (an ISA device) work.
1447
1448source "drivers/pci/pcie/Kconfig"
1449
1450source "drivers/pci/Kconfig"
1451
1452# x86_64 have no ISA slots, but do have ISA-style DMA.
1453config ISA_DMA_API
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001454 def_bool y
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001455
1456if X86_32
1457
1458config ISA
1459 bool "ISA support"
1460 depends on !(X86_VOYAGER || X86_VISWS)
1461 help
1462 Find out whether you have ISA slots on your motherboard. ISA is the
1463 name of a bus system, i.e. the way the CPU talks to the other stuff
1464 inside your box. Other bus systems are PCI, EISA, MicroChannel
1465 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
1466 newer boards don't support it. If you have ISA, say Y, otherwise N.
1467
1468config EISA
1469 bool "EISA support"
1470 depends on ISA
1471 ---help---
1472 The Extended Industry Standard Architecture (EISA) bus was
1473 developed as an open alternative to the IBM MicroChannel bus.
1474
1475 The EISA bus provided some of the features of the IBM MicroChannel
1476 bus while maintaining backward compatibility with cards made for
1477 the older ISA bus. The EISA bus saw limited use between 1988 and
1478 1995 when it was made obsolete by the PCI bus.
1479
1480 Say Y here if you are building a kernel for an EISA-based machine.
1481
1482 Otherwise, say N.
1483
1484source "drivers/eisa/Kconfig"
1485
1486config MCA
1487 bool "MCA support" if !(X86_VISWS || X86_VOYAGER)
1488 default y if X86_VOYAGER
1489 help
1490 MicroChannel Architecture is found in some IBM PS/2 machines and
1491 laptops. It is a bus system similar to PCI or ISA. See
1492 <file:Documentation/mca.txt> (and especially the web page given
1493 there) before attempting to build an MCA bus kernel.
1494
1495source "drivers/mca/Kconfig"
1496
1497config SCx200
1498 tristate "NatSemi SCx200 support"
1499 depends on !X86_VOYAGER
1500 help
1501 This provides basic support for National Semiconductor's
1502 (now AMD's) Geode processors. The driver probes for the
1503 PCI-IDs of several on-chip devices, so its a good dependency
1504 for other scx200_* drivers.
1505
1506 If compiled as a module, the driver is named scx200.
1507
1508config SCx200HR_TIMER
1509 tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
1510 depends on SCx200 && GENERIC_TIME
1511 default y
1512 help
1513 This driver provides a clocksource built upon the on-chip
1514 27MHz high-resolution timer. Its also a workaround for
1515 NSC Geode SC-1100's buggy TSC, which loses time when the
1516 processor goes idle (as is done by the scheduler). The
1517 other workaround is idle=poll boot option.
1518
1519config GEODE_MFGPT_TIMER
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001520 def_bool y
1521 prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001522 depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001523 help
1524 This driver provides a clock event source based on the MFGPT
1525 timer(s) in the CS5535 and CS5536 companion chip for the geode.
1526 MFGPTs have a better resolution and max interval than the
1527 generic PIT, and are suitable for use as high-res timers.
1528
Sam Ravnborgbc0120f2007-11-06 23:10:39 +01001529endif # X86_32
1530
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001531config K8_NB
1532 def_bool y
Sam Ravnborgbc0120f2007-11-06 23:10:39 +01001533 depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001534
1535source "drivers/pcmcia/Kconfig"
1536
1537source "drivers/pci/hotplug/Kconfig"
1538
1539endmenu
1540
1541
1542menu "Executable file formats / Emulations"
1543
1544source "fs/Kconfig.binfmt"
1545
1546config IA32_EMULATION
1547 bool "IA32 Emulation"
1548 depends on X86_64
Roland McGratha97f52e2008-01-30 13:31:55 +01001549 select COMPAT_BINFMT_ELF
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001550 help
1551 Include code to run 32-bit programs under a 64-bit kernel. You should
1552 likely turn this on, unless you're 100% sure that you don't have any
1553 32-bit programs left.
1554
1555config IA32_AOUT
1556 tristate "IA32 a.out support"
1557 depends on IA32_EMULATION
1558 help
1559 Support old a.out binaries in the 32bit emulation.
1560
1561config COMPAT
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001562 def_bool y
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001563 depends on IA32_EMULATION
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001564
1565config COMPAT_FOR_U64_ALIGNMENT
1566 def_bool COMPAT
1567 depends on X86_64
1568
1569config SYSVIPC_COMPAT
Harvey Harrison3c2362e2008-01-30 13:31:03 +01001570 def_bool y
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001571 depends on X86_64 && COMPAT && SYSVIPC
Sam Ravnborge279b6c2007-11-06 20:41:05 +01001572
1573endmenu
1574
1575
1576source "net/Kconfig"
1577
1578source "drivers/Kconfig"
1579
1580source "drivers/firmware/Kconfig"
1581
1582source "fs/Kconfig"
1583
1584source "kernel/Kconfig.instrumentation"
1585
1586source "arch/x86/Kconfig.debug"
1587
1588source "security/Kconfig"
1589
1590source "crypto/Kconfig"
1591
1592source "lib/Kconfig"