Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 1 | /* |
| 2 | * TI LP8860 4-Channel LED Driver |
| 3 | * |
| 4 | * Copyright (C) 2014 Texas Instruments |
| 5 | * |
| 6 | * Author: Dan Murphy <dmurphy@ti.com> |
| 7 | * |
| 8 | * This program is free software; you can redistribute it and/or |
| 9 | * modify it under the terms of the GNU General Public License |
| 10 | * version 2 as published by the Free Software Foundation. |
| 11 | * |
| 12 | */ |
| 13 | |
| 14 | #include <linux/i2c.h> |
| 15 | #include <linux/init.h> |
| 16 | #include <linux/leds.h> |
| 17 | #include <linux/regmap.h> |
| 18 | #include <linux/regulator/consumer.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/mutex.h> |
| 21 | #include <linux/of.h> |
| 22 | #include <linux/of_gpio.h> |
| 23 | #include <linux/gpio/consumer.h> |
| 24 | #include <linux/slab.h> |
Dan Murphy | c6b218c | 2017-12-18 14:23:04 -0600 | [diff] [blame] | 25 | #include <uapi/linux/uleds.h> |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 26 | |
| 27 | #define LP8860_DISP_CL1_BRT_MSB 0x00 |
| 28 | #define LP8860_DISP_CL1_BRT_LSB 0x01 |
| 29 | #define LP8860_DISP_CL1_CURR_MSB 0x02 |
| 30 | #define LP8860_DISP_CL1_CURR_LSB 0x03 |
| 31 | #define LP8860_CL2_BRT_MSB 0x04 |
| 32 | #define LP8860_CL2_BRT_LSB 0x05 |
| 33 | #define LP8860_CL2_CURRENT 0x06 |
| 34 | #define LP8860_CL3_BRT_MSB 0x07 |
| 35 | #define LP8860_CL3_BRT_LSB 0x08 |
| 36 | #define LP8860_CL3_CURRENT 0x09 |
| 37 | #define LP8860_CL4_BRT_MSB 0x0a |
| 38 | #define LP8860_CL4_BRT_LSB 0x0b |
| 39 | #define LP8860_CL4_CURRENT 0x0c |
| 40 | #define LP8860_CONFIG 0x0d |
| 41 | #define LP8860_STATUS 0x0e |
| 42 | #define LP8860_FAULT 0x0f |
| 43 | #define LP8860_LED_FAULT 0x10 |
| 44 | #define LP8860_FAULT_CLEAR 0x11 |
| 45 | #define LP8860_ID 0x12 |
| 46 | #define LP8860_TEMP_MSB 0x13 |
| 47 | #define LP8860_TEMP_LSB 0x14 |
| 48 | #define LP8860_DISP_LED_CURR_MSB 0x15 |
| 49 | #define LP8860_DISP_LED_CURR_LSB 0x16 |
| 50 | #define LP8860_DISP_LED_PWM_MSB 0x17 |
| 51 | #define LP8860_DISP_LED_PWM_LSB 0x18 |
| 52 | #define LP8860_EEPROM_CNTRL 0x19 |
| 53 | #define LP8860_EEPROM_UNLOCK 0x1a |
| 54 | |
| 55 | #define LP8860_EEPROM_REG_0 0x60 |
| 56 | #define LP8860_EEPROM_REG_1 0x61 |
| 57 | #define LP8860_EEPROM_REG_2 0x62 |
| 58 | #define LP8860_EEPROM_REG_3 0x63 |
| 59 | #define LP8860_EEPROM_REG_4 0x64 |
| 60 | #define LP8860_EEPROM_REG_5 0x65 |
| 61 | #define LP8860_EEPROM_REG_6 0x66 |
| 62 | #define LP8860_EEPROM_REG_7 0x67 |
| 63 | #define LP8860_EEPROM_REG_8 0x68 |
| 64 | #define LP8860_EEPROM_REG_9 0x69 |
| 65 | #define LP8860_EEPROM_REG_10 0x6a |
| 66 | #define LP8860_EEPROM_REG_11 0x6b |
| 67 | #define LP8860_EEPROM_REG_12 0x6c |
| 68 | #define LP8860_EEPROM_REG_13 0x6d |
| 69 | #define LP8860_EEPROM_REG_14 0x6e |
| 70 | #define LP8860_EEPROM_REG_15 0x6f |
| 71 | #define LP8860_EEPROM_REG_16 0x70 |
| 72 | #define LP8860_EEPROM_REG_17 0x71 |
| 73 | #define LP8860_EEPROM_REG_18 0x72 |
| 74 | #define LP8860_EEPROM_REG_19 0x73 |
| 75 | #define LP8860_EEPROM_REG_20 0x74 |
| 76 | #define LP8860_EEPROM_REG_21 0x75 |
| 77 | #define LP8860_EEPROM_REG_22 0x76 |
| 78 | #define LP8860_EEPROM_REG_23 0x77 |
| 79 | #define LP8860_EEPROM_REG_24 0x78 |
| 80 | |
| 81 | #define LP8860_LOCK_EEPROM 0x00 |
| 82 | #define LP8860_UNLOCK_EEPROM 0x01 |
| 83 | #define LP8860_PROGRAM_EEPROM 0x02 |
| 84 | #define LP8860_EEPROM_CODE_1 0x08 |
| 85 | #define LP8860_EEPROM_CODE_2 0xba |
| 86 | #define LP8860_EEPROM_CODE_3 0xef |
| 87 | |
| 88 | #define LP8860_CLEAR_FAULTS 0x01 |
| 89 | |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 90 | /** |
| 91 | * struct lp8860_led - |
| 92 | * @lock - Lock for reading/writing the device |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 93 | * @client - Pointer to the I2C client |
| 94 | * @led_dev - led class device pointer |
| 95 | * @regmap - Devices register map |
| 96 | * @eeprom_regmap - EEPROM register map |
| 97 | * @enable_gpio - VDDIO/EN gpio to enable communication interface |
| 98 | * @regulator - LED supply regulator pointer |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 99 | * @label - LED label |
Dan Murphy | 8a7a76c | 2017-11-15 13:52:12 -0600 | [diff] [blame] | 100 | */ |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 101 | struct lp8860_led { |
| 102 | struct mutex lock; |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 103 | struct i2c_client *client; |
| 104 | struct led_classdev led_dev; |
| 105 | struct regmap *regmap; |
| 106 | struct regmap *eeprom_regmap; |
| 107 | struct gpio_desc *enable_gpio; |
| 108 | struct regulator *regulator; |
Dan Murphy | c6b218c | 2017-12-18 14:23:04 -0600 | [diff] [blame] | 109 | char label[LED_MAX_NAME_SIZE]; |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 110 | }; |
| 111 | |
| 112 | struct lp8860_eeprom_reg { |
| 113 | uint8_t reg; |
| 114 | uint8_t value; |
| 115 | }; |
| 116 | |
| 117 | static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = { |
| 118 | { LP8860_EEPROM_REG_0, 0xed }, |
| 119 | { LP8860_EEPROM_REG_1, 0xdf }, |
| 120 | { LP8860_EEPROM_REG_2, 0xdc }, |
| 121 | { LP8860_EEPROM_REG_3, 0xf0 }, |
| 122 | { LP8860_EEPROM_REG_4, 0xdf }, |
| 123 | { LP8860_EEPROM_REG_5, 0xe5 }, |
| 124 | { LP8860_EEPROM_REG_6, 0xf2 }, |
| 125 | { LP8860_EEPROM_REG_7, 0x77 }, |
| 126 | { LP8860_EEPROM_REG_8, 0x77 }, |
| 127 | { LP8860_EEPROM_REG_9, 0x71 }, |
| 128 | { LP8860_EEPROM_REG_10, 0x3f }, |
| 129 | { LP8860_EEPROM_REG_11, 0xb7 }, |
| 130 | { LP8860_EEPROM_REG_12, 0x17 }, |
| 131 | { LP8860_EEPROM_REG_13, 0xef }, |
| 132 | { LP8860_EEPROM_REG_14, 0xb0 }, |
| 133 | { LP8860_EEPROM_REG_15, 0x87 }, |
| 134 | { LP8860_EEPROM_REG_16, 0xce }, |
| 135 | { LP8860_EEPROM_REG_17, 0x72 }, |
| 136 | { LP8860_EEPROM_REG_18, 0xe5 }, |
| 137 | { LP8860_EEPROM_REG_19, 0xdf }, |
| 138 | { LP8860_EEPROM_REG_20, 0x35 }, |
| 139 | { LP8860_EEPROM_REG_21, 0x06 }, |
| 140 | { LP8860_EEPROM_REG_22, 0xdc }, |
| 141 | { LP8860_EEPROM_REG_23, 0x88 }, |
| 142 | { LP8860_EEPROM_REG_24, 0x3E }, |
| 143 | }; |
| 144 | |
| 145 | static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock) |
| 146 | { |
| 147 | int ret; |
| 148 | |
| 149 | mutex_lock(&led->lock); |
| 150 | |
| 151 | if (lock == LP8860_UNLOCK_EEPROM) { |
| 152 | ret = regmap_write(led->regmap, |
| 153 | LP8860_EEPROM_UNLOCK, |
| 154 | LP8860_EEPROM_CODE_1); |
| 155 | if (ret) { |
| 156 | dev_err(&led->client->dev, "EEPROM Unlock failed\n"); |
| 157 | goto out; |
| 158 | } |
| 159 | |
| 160 | ret = regmap_write(led->regmap, |
| 161 | LP8860_EEPROM_UNLOCK, |
| 162 | LP8860_EEPROM_CODE_2); |
| 163 | if (ret) { |
| 164 | dev_err(&led->client->dev, "EEPROM Unlock failed\n"); |
| 165 | goto out; |
| 166 | } |
| 167 | ret = regmap_write(led->regmap, |
| 168 | LP8860_EEPROM_UNLOCK, |
| 169 | LP8860_EEPROM_CODE_3); |
| 170 | if (ret) { |
| 171 | dev_err(&led->client->dev, "EEPROM Unlock failed\n"); |
| 172 | goto out; |
| 173 | } |
| 174 | } else { |
| 175 | ret = regmap_write(led->regmap, |
| 176 | LP8860_EEPROM_UNLOCK, |
| 177 | LP8860_LOCK_EEPROM); |
| 178 | } |
| 179 | |
| 180 | out: |
| 181 | mutex_unlock(&led->lock); |
| 182 | return ret; |
| 183 | } |
| 184 | |
| 185 | static int lp8860_fault_check(struct lp8860_led *led) |
| 186 | { |
| 187 | int ret, fault; |
| 188 | unsigned int read_buf; |
| 189 | |
| 190 | ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf); |
| 191 | if (ret) |
| 192 | goto out; |
| 193 | |
| 194 | fault = read_buf; |
| 195 | |
| 196 | ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf); |
| 197 | if (ret) |
| 198 | goto out; |
| 199 | |
| 200 | fault |= read_buf; |
| 201 | |
| 202 | /* Attempt to clear any faults */ |
| 203 | if (fault) |
| 204 | ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR, |
| 205 | LP8860_CLEAR_FAULTS); |
| 206 | out: |
| 207 | return ret; |
| 208 | } |
| 209 | |
Andrew Lunn | 7c4b10a | 2015-08-20 12:28:26 +0200 | [diff] [blame] | 210 | static int lp8860_brightness_set(struct led_classdev *led_cdev, |
| 211 | enum led_brightness brt_val) |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 212 | { |
Andrew Lunn | 7c4b10a | 2015-08-20 12:28:26 +0200 | [diff] [blame] | 213 | struct lp8860_led *led = |
| 214 | container_of(led_cdev, struct lp8860_led, led_dev); |
| 215 | int disp_brightness = brt_val * 255; |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 216 | int ret; |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 217 | |
| 218 | mutex_lock(&led->lock); |
| 219 | |
| 220 | ret = lp8860_fault_check(led); |
| 221 | if (ret) { |
| 222 | dev_err(&led->client->dev, "Cannot read/clear faults\n"); |
| 223 | goto out; |
| 224 | } |
| 225 | |
| 226 | ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB, |
| 227 | (disp_brightness & 0xff00) >> 8); |
| 228 | if (ret) { |
| 229 | dev_err(&led->client->dev, "Cannot write CL1 MSB\n"); |
| 230 | goto out; |
| 231 | } |
| 232 | |
| 233 | ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB, |
| 234 | disp_brightness & 0xff); |
| 235 | if (ret) { |
| 236 | dev_err(&led->client->dev, "Cannot write CL1 LSB\n"); |
| 237 | goto out; |
| 238 | } |
| 239 | out: |
| 240 | mutex_unlock(&led->lock); |
Andrew Lunn | 7c4b10a | 2015-08-20 12:28:26 +0200 | [diff] [blame] | 241 | return ret; |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 242 | } |
| 243 | |
| 244 | static int lp8860_init(struct lp8860_led *led) |
| 245 | { |
| 246 | unsigned int read_buf; |
| 247 | int ret, i, reg_count; |
| 248 | |
Dan Murphy | b12ef03 | 2017-11-15 13:52:13 -0600 | [diff] [blame] | 249 | if (led->regulator) { |
| 250 | ret = regulator_enable(led->regulator); |
| 251 | if (ret) { |
| 252 | dev_err(&led->client->dev, |
| 253 | "Failed to enable regulator\n"); |
| 254 | return ret; |
| 255 | } |
| 256 | } |
| 257 | |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 258 | if (led->enable_gpio) |
| 259 | gpiod_direction_output(led->enable_gpio, 1); |
| 260 | |
| 261 | ret = lp8860_fault_check(led); |
| 262 | if (ret) |
| 263 | goto out; |
| 264 | |
| 265 | ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf); |
| 266 | if (ret) |
| 267 | goto out; |
| 268 | |
| 269 | ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM); |
| 270 | if (ret) { |
| 271 | dev_err(&led->client->dev, "Failed unlocking EEPROM\n"); |
| 272 | goto out; |
| 273 | } |
| 274 | |
| 275 | reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]); |
| 276 | for (i = 0; i < reg_count; i++) { |
| 277 | ret = regmap_write(led->eeprom_regmap, |
| 278 | lp8860_eeprom_disp_regs[i].reg, |
| 279 | lp8860_eeprom_disp_regs[i].value); |
| 280 | if (ret) { |
| 281 | dev_err(&led->client->dev, "Failed writing EEPROM\n"); |
| 282 | goto out; |
| 283 | } |
| 284 | } |
| 285 | |
| 286 | ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM); |
| 287 | if (ret) |
| 288 | goto out; |
| 289 | |
| 290 | ret = regmap_write(led->regmap, |
| 291 | LP8860_EEPROM_CNTRL, |
| 292 | LP8860_PROGRAM_EEPROM); |
Dan Murphy | b12ef03 | 2017-11-15 13:52:13 -0600 | [diff] [blame] | 293 | if (ret) { |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 294 | dev_err(&led->client->dev, "Failed programming EEPROM\n"); |
Dan Murphy | b12ef03 | 2017-11-15 13:52:13 -0600 | [diff] [blame] | 295 | goto out; |
| 296 | } |
| 297 | |
| 298 | return ret; |
| 299 | |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 300 | out: |
| 301 | if (ret) |
| 302 | if (led->enable_gpio) |
| 303 | gpiod_direction_output(led->enable_gpio, 0); |
Dan Murphy | b12ef03 | 2017-11-15 13:52:13 -0600 | [diff] [blame] | 304 | |
| 305 | if (led->regulator) { |
| 306 | ret = regulator_disable(led->regulator); |
| 307 | if (ret) |
| 308 | dev_err(&led->client->dev, |
| 309 | "Failed to disable regulator\n"); |
| 310 | } |
| 311 | |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 312 | return ret; |
| 313 | } |
| 314 | |
Axel Lin | de88e71 | 2015-07-08 10:43:26 +0800 | [diff] [blame] | 315 | static const struct reg_default lp8860_reg_defs[] = { |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 316 | { LP8860_DISP_CL1_BRT_MSB, 0x00}, |
| 317 | { LP8860_DISP_CL1_BRT_LSB, 0x00}, |
| 318 | { LP8860_DISP_CL1_CURR_MSB, 0x00}, |
| 319 | { LP8860_DISP_CL1_CURR_LSB, 0x00}, |
| 320 | { LP8860_CL2_BRT_MSB, 0x00}, |
| 321 | { LP8860_CL2_BRT_LSB, 0x00}, |
| 322 | { LP8860_CL2_CURRENT, 0x00}, |
| 323 | { LP8860_CL3_BRT_MSB, 0x00}, |
| 324 | { LP8860_CL3_BRT_LSB, 0x00}, |
| 325 | { LP8860_CL3_CURRENT, 0x00}, |
| 326 | { LP8860_CL4_BRT_MSB, 0x00}, |
| 327 | { LP8860_CL4_BRT_LSB, 0x00}, |
| 328 | { LP8860_CL4_CURRENT, 0x00}, |
| 329 | { LP8860_CONFIG, 0x00}, |
| 330 | { LP8860_FAULT_CLEAR, 0x00}, |
| 331 | { LP8860_EEPROM_CNTRL, 0x80}, |
| 332 | { LP8860_EEPROM_UNLOCK, 0x00}, |
| 333 | }; |
| 334 | |
| 335 | static const struct regmap_config lp8860_regmap_config = { |
| 336 | .reg_bits = 8, |
| 337 | .val_bits = 8, |
| 338 | |
| 339 | .max_register = LP8860_EEPROM_UNLOCK, |
| 340 | .reg_defaults = lp8860_reg_defs, |
| 341 | .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs), |
| 342 | .cache_type = REGCACHE_NONE, |
| 343 | }; |
| 344 | |
Axel Lin | de88e71 | 2015-07-08 10:43:26 +0800 | [diff] [blame] | 345 | static const struct reg_default lp8860_eeprom_defs[] = { |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 346 | { LP8860_EEPROM_REG_0, 0x00 }, |
| 347 | { LP8860_EEPROM_REG_1, 0x00 }, |
| 348 | { LP8860_EEPROM_REG_2, 0x00 }, |
| 349 | { LP8860_EEPROM_REG_3, 0x00 }, |
| 350 | { LP8860_EEPROM_REG_4, 0x00 }, |
| 351 | { LP8860_EEPROM_REG_5, 0x00 }, |
| 352 | { LP8860_EEPROM_REG_6, 0x00 }, |
| 353 | { LP8860_EEPROM_REG_7, 0x00 }, |
| 354 | { LP8860_EEPROM_REG_8, 0x00 }, |
| 355 | { LP8860_EEPROM_REG_9, 0x00 }, |
| 356 | { LP8860_EEPROM_REG_10, 0x00 }, |
| 357 | { LP8860_EEPROM_REG_11, 0x00 }, |
| 358 | { LP8860_EEPROM_REG_12, 0x00 }, |
| 359 | { LP8860_EEPROM_REG_13, 0x00 }, |
| 360 | { LP8860_EEPROM_REG_14, 0x00 }, |
| 361 | { LP8860_EEPROM_REG_15, 0x00 }, |
| 362 | { LP8860_EEPROM_REG_16, 0x00 }, |
| 363 | { LP8860_EEPROM_REG_17, 0x00 }, |
| 364 | { LP8860_EEPROM_REG_18, 0x00 }, |
| 365 | { LP8860_EEPROM_REG_19, 0x00 }, |
| 366 | { LP8860_EEPROM_REG_20, 0x00 }, |
| 367 | { LP8860_EEPROM_REG_21, 0x00 }, |
| 368 | { LP8860_EEPROM_REG_22, 0x00 }, |
| 369 | { LP8860_EEPROM_REG_23, 0x00 }, |
| 370 | { LP8860_EEPROM_REG_24, 0x00 }, |
| 371 | }; |
| 372 | |
| 373 | static const struct regmap_config lp8860_eeprom_regmap_config = { |
| 374 | .reg_bits = 8, |
| 375 | .val_bits = 8, |
| 376 | |
| 377 | .max_register = LP8860_EEPROM_REG_24, |
| 378 | .reg_defaults = lp8860_eeprom_defs, |
| 379 | .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs), |
| 380 | .cache_type = REGCACHE_NONE, |
| 381 | }; |
| 382 | |
| 383 | static int lp8860_probe(struct i2c_client *client, |
| 384 | const struct i2c_device_id *id) |
| 385 | { |
| 386 | int ret; |
| 387 | struct lp8860_led *led; |
| 388 | struct device_node *np = client->dev.of_node; |
Dan Murphy | c6b218c | 2017-12-18 14:23:04 -0600 | [diff] [blame] | 389 | struct device_node *child_node; |
| 390 | const char *name; |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 391 | |
| 392 | led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL); |
| 393 | if (!led) |
| 394 | return -ENOMEM; |
| 395 | |
Dan Murphy | c6b218c | 2017-12-18 14:23:04 -0600 | [diff] [blame] | 396 | for_each_available_child_of_node(np, child_node) { |
Dan Murphy | 50aa46c | 2017-12-18 14:23:06 -0600 | [diff] [blame] | 397 | led->led_dev.default_trigger = of_get_property(child_node, |
| 398 | "linux,default-trigger", |
| 399 | NULL); |
| 400 | |
Dan Murphy | c6b218c | 2017-12-18 14:23:04 -0600 | [diff] [blame] | 401 | ret = of_property_read_string(child_node, "label", &name); |
| 402 | if (!ret) |
| 403 | snprintf(led->label, sizeof(led->label), "%s:%s", |
| 404 | id->name, name); |
| 405 | else |
| 406 | snprintf(led->label, sizeof(led->label), |
| 407 | "%s::display_cluster", id->name); |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 408 | } |
| 409 | |
Uwe Kleine-König | eb2294c | 2015-03-01 13:25:47 -0800 | [diff] [blame] | 410 | led->enable_gpio = devm_gpiod_get_optional(&client->dev, |
| 411 | "enable", GPIOD_OUT_LOW); |
| 412 | if (IS_ERR(led->enable_gpio)) { |
| 413 | ret = PTR_ERR(led->enable_gpio); |
| 414 | dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret); |
| 415 | return ret; |
| 416 | } |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 417 | |
| 418 | led->regulator = devm_regulator_get(&client->dev, "vled"); |
| 419 | if (IS_ERR(led->regulator)) |
| 420 | led->regulator = NULL; |
| 421 | |
| 422 | led->client = client; |
| 423 | led->led_dev.name = led->label; |
Andrew Lunn | 7c4b10a | 2015-08-20 12:28:26 +0200 | [diff] [blame] | 424 | led->led_dev.brightness_set_blocking = lp8860_brightness_set; |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 425 | |
| 426 | mutex_init(&led->lock); |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 427 | |
| 428 | i2c_set_clientdata(client, led); |
| 429 | |
| 430 | led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config); |
| 431 | if (IS_ERR(led->regmap)) { |
| 432 | ret = PTR_ERR(led->regmap); |
| 433 | dev_err(&client->dev, "Failed to allocate register map: %d\n", |
| 434 | ret); |
| 435 | return ret; |
| 436 | } |
| 437 | |
| 438 | led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config); |
| 439 | if (IS_ERR(led->eeprom_regmap)) { |
| 440 | ret = PTR_ERR(led->eeprom_regmap); |
| 441 | dev_err(&client->dev, "Failed to allocate register map: %d\n", |
| 442 | ret); |
| 443 | return ret; |
| 444 | } |
| 445 | |
| 446 | ret = lp8860_init(led); |
| 447 | if (ret) |
| 448 | return ret; |
| 449 | |
Dan Murphy | a2169c9 | 2017-12-18 14:23:07 -0600 | [diff] [blame] | 450 | ret = devm_led_classdev_register(&client->dev, &led->led_dev); |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 451 | if (ret) { |
| 452 | dev_err(&client->dev, "led register err: %d\n", ret); |
| 453 | return ret; |
| 454 | } |
| 455 | |
| 456 | return 0; |
| 457 | } |
| 458 | |
| 459 | static int lp8860_remove(struct i2c_client *client) |
| 460 | { |
| 461 | struct lp8860_led *led = i2c_get_clientdata(client); |
| 462 | int ret; |
| 463 | |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 464 | if (led->enable_gpio) |
| 465 | gpiod_direction_output(led->enable_gpio, 0); |
| 466 | |
| 467 | if (led->regulator) { |
| 468 | ret = regulator_disable(led->regulator); |
| 469 | if (ret) |
| 470 | dev_err(&led->client->dev, |
| 471 | "Failed to disable regulator\n"); |
| 472 | } |
| 473 | |
Dan Murphy | a2169c9 | 2017-12-18 14:23:07 -0600 | [diff] [blame] | 474 | mutex_destroy(&led->lock); |
| 475 | |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 476 | return 0; |
| 477 | } |
| 478 | |
| 479 | static const struct i2c_device_id lp8860_id[] = { |
| 480 | { "lp8860", 0 }, |
| 481 | { } |
| 482 | }; |
| 483 | MODULE_DEVICE_TABLE(i2c, lp8860_id); |
| 484 | |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 485 | static const struct of_device_id of_lp8860_leds_match[] = { |
| 486 | { .compatible = "ti,lp8860", }, |
| 487 | {}, |
| 488 | }; |
| 489 | MODULE_DEVICE_TABLE(of, of_lp8860_leds_match); |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 490 | |
| 491 | static struct i2c_driver lp8860_driver = { |
| 492 | .driver = { |
| 493 | .name = "lp8860", |
Dan Murphy | a2169c9 | 2017-12-18 14:23:07 -0600 | [diff] [blame] | 494 | .of_match_table = of_lp8860_leds_match, |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 495 | }, |
| 496 | .probe = lp8860_probe, |
| 497 | .remove = lp8860_remove, |
| 498 | .id_table = lp8860_id, |
| 499 | }; |
| 500 | module_i2c_driver(lp8860_driver); |
| 501 | |
Masanari Iida | 5ee047f | 2015-03-30 02:50:11 -0700 | [diff] [blame] | 502 | MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver"); |
Dan Murphy | 7a8685a | 2014-11-19 04:48:35 -0800 | [diff] [blame] | 503 | MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); |
Dan Murphy | a2169c9 | 2017-12-18 14:23:07 -0600 | [diff] [blame] | 504 | MODULE_LICENSE("GPL v2"); |