Stefan Roese | 2a70691 | 2008-03-26 22:39:50 +1100 | [diff] [blame] | 1 | /* |
| 2 | * IBM/AMCC PPC4xx SoC setup code |
| 3 | * |
| 4 | * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> |
| 5 | * |
| 6 | * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is: |
| 7 | * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> |
| 8 | * Copyright (c) 2003 - 2006 Zultys Technologies |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify it |
| 11 | * under the terms of the GNU General Public License as published by the |
| 12 | * Free Software Foundation; either version 2 of the License, or (at your |
| 13 | * option) any later version. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/stddef.h> |
| 17 | #include <linux/kernel.h> |
| 18 | #include <linux/init.h> |
| 19 | #include <linux/errno.h> |
| 20 | #include <linux/interrupt.h> |
| 21 | #include <linux/irq.h> |
| 22 | #include <linux/of_platform.h> |
| 23 | |
| 24 | #include <asm/dcr.h> |
| 25 | #include <asm/dcr-regs.h> |
Stefan Roese | 93173ce | 2008-03-28 01:43:31 +1100 | [diff] [blame] | 26 | #include <asm/reg.h> |
Stefan Roese | 2a70691 | 2008-03-26 22:39:50 +1100 | [diff] [blame] | 27 | |
| 28 | static u32 dcrbase_l2c; |
| 29 | |
| 30 | /* |
| 31 | * L2-cache |
| 32 | */ |
| 33 | |
| 34 | /* Issue L2C diagnostic command */ |
| 35 | static inline u32 l2c_diag(u32 addr) |
| 36 | { |
| 37 | mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr); |
| 38 | mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG); |
| 39 | while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) |
| 40 | ; |
| 41 | |
| 42 | return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA); |
| 43 | } |
| 44 | |
| 45 | static irqreturn_t l2c_error_handler(int irq, void *dev) |
| 46 | { |
| 47 | u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR); |
| 48 | |
| 49 | if (sr & L2C_SR_CPE) { |
| 50 | /* Read cache trapped address */ |
| 51 | u32 addr = l2c_diag(0x42000000); |
| 52 | printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", |
| 53 | addr); |
| 54 | } |
| 55 | if (sr & L2C_SR_TPE) { |
| 56 | /* Read tag trapped address */ |
| 57 | u32 addr = l2c_diag(0x82000000) >> 16; |
| 58 | printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", |
| 59 | addr); |
| 60 | } |
| 61 | |
| 62 | /* Clear parity errors */ |
| 63 | if (sr & (L2C_SR_CPE | L2C_SR_TPE)){ |
| 64 | mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); |
| 65 | mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); |
| 66 | } else { |
| 67 | printk(KERN_EMERG "L2C: LRU error\n"); |
| 68 | } |
| 69 | |
| 70 | return IRQ_HANDLED; |
| 71 | } |
| 72 | |
| 73 | static int __init ppc4xx_l2c_probe(void) |
| 74 | { |
| 75 | struct device_node *np; |
| 76 | u32 r; |
| 77 | unsigned long flags; |
| 78 | int irq; |
| 79 | const u32 *dcrreg; |
| 80 | u32 dcrbase_isram; |
| 81 | int len; |
| 82 | const u32 *prop; |
| 83 | u32 l2_size; |
| 84 | |
| 85 | np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache"); |
| 86 | if (!np) |
| 87 | return 0; |
| 88 | |
| 89 | /* Get l2 cache size */ |
| 90 | prop = of_get_property(np, "cache-size", NULL); |
| 91 | if (prop == NULL) { |
| 92 | printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name); |
| 93 | of_node_put(np); |
| 94 | return -ENODEV; |
| 95 | } |
| 96 | l2_size = prop[0]; |
| 97 | |
| 98 | /* Map DCRs */ |
| 99 | dcrreg = of_get_property(np, "dcr-reg", &len); |
| 100 | if (!dcrreg || (len != 4 * sizeof(u32))) { |
| 101 | printk(KERN_ERR "%s: Can't get DCR register base !", |
| 102 | np->full_name); |
| 103 | of_node_put(np); |
| 104 | return -ENODEV; |
| 105 | } |
| 106 | dcrbase_isram = dcrreg[0]; |
| 107 | dcrbase_l2c = dcrreg[2]; |
| 108 | |
| 109 | /* Get and map irq number from device tree */ |
| 110 | irq = irq_of_parse_and_map(np, 0); |
| 111 | if (irq == NO_IRQ) { |
| 112 | printk(KERN_ERR "irq_of_parse_and_map failed\n"); |
| 113 | of_node_put(np); |
| 114 | return -ENODEV; |
| 115 | } |
| 116 | |
| 117 | /* Install error handler */ |
| 118 | if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) { |
| 119 | printk(KERN_ERR "Cannot install L2C error handler" |
| 120 | ", cache is not enabled\n"); |
| 121 | of_node_put(np); |
| 122 | return -ENODEV; |
| 123 | } |
| 124 | |
| 125 | local_irq_save(flags); |
| 126 | asm volatile ("sync" ::: "memory"); |
| 127 | |
| 128 | /* Disable SRAM */ |
| 129 | mtdcr(dcrbase_isram + DCRN_SRAM0_DPC, |
| 130 | mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE); |
| 131 | mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR, |
| 132 | mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK); |
| 133 | mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR, |
| 134 | mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK); |
| 135 | mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR, |
| 136 | mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK); |
| 137 | mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR, |
| 138 | mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK); |
| 139 | |
| 140 | /* Enable L2_MODE without ICU/DCU */ |
| 141 | r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) & |
| 142 | ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK); |
| 143 | r |= L2C_CFG_L2M | L2C_CFG_SS_256; |
| 144 | mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); |
| 145 | |
| 146 | mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); |
| 147 | |
| 148 | /* Hardware Clear Command */ |
| 149 | mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC); |
| 150 | while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) |
| 151 | ; |
| 152 | |
| 153 | /* Clear Cache Parity and Tag Errors */ |
| 154 | mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); |
| 155 | |
| 156 | /* Enable 64G snoop region starting at 0 */ |
| 157 | r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) & |
| 158 | ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); |
| 159 | r |= L2C_SNP_SSR_32G | L2C_SNP_ESR; |
| 160 | mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r); |
| 161 | |
| 162 | r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) & |
| 163 | ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); |
| 164 | r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR; |
| 165 | mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r); |
| 166 | |
| 167 | asm volatile ("sync" ::: "memory"); |
| 168 | |
| 169 | /* Enable ICU/DCU ports */ |
| 170 | r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG); |
| 171 | r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM |
| 172 | | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM); |
| 173 | r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN |
| 174 | | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM; |
| 175 | |
| 176 | /* Check for 460EX/GT special handling */ |
| 177 | if (of_device_is_compatible(np, "ibm,l2-cache-460ex")) |
| 178 | r |= L2C_CFG_RDBW; |
| 179 | |
| 180 | mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); |
| 181 | |
| 182 | asm volatile ("sync; isync" ::: "memory"); |
| 183 | local_irq_restore(flags); |
| 184 | |
| 185 | printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10); |
| 186 | |
| 187 | of_node_put(np); |
| 188 | return 0; |
| 189 | } |
| 190 | arch_initcall(ppc4xx_l2c_probe); |
Stefan Roese | 93173ce | 2008-03-28 01:43:31 +1100 | [diff] [blame] | 191 | |
| 192 | /* |
| 193 | * At present, this routine just applies a system reset. |
| 194 | */ |
| 195 | void ppc4xx_reset_system(char *cmd) |
| 196 | { |
| 197 | mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM); |
| 198 | while (1) |
| 199 | ; /* Just in case the reset doesn't work */ |
| 200 | } |