Sébastien Szymanski | 902cb3a | 2015-03-06 16:49:38 -0800 | [diff] [blame] | 1 | /* |
| 2 | * Driver for Semtech SX8654 I2C touchscreen controller. |
| 3 | * |
| 4 | * Copyright (c) 2015 Armadeus Systems |
| 5 | * Sébastien Szymanski <sebastien.szymanski@armadeus.com> |
| 6 | * |
| 7 | * Using code from: |
| 8 | * - sx865x.c |
| 9 | * Copyright (c) 2013 U-MoBo Srl |
| 10 | * Pierluigi Passaro <p.passaro@u-mobo.com> |
| 11 | * - sx8650.c |
| 12 | * Copyright (c) 2009 Wayne Roberts |
| 13 | * - tsc2007.c |
| 14 | * Copyright (c) 2008 Kwangwoo Lee |
| 15 | * - ads7846.c |
| 16 | * Copyright (c) 2005 David Brownell |
| 17 | * Copyright (c) 2006 Nokia Corporation |
| 18 | * - corgi_ts.c |
| 19 | * Copyright (C) 2004-2005 Richard Purdie |
| 20 | * - omap_ts.[hc], ads7846.h, ts_osk.c |
| 21 | * Copyright (C) 2002 MontaVista Software |
| 22 | * Copyright (C) 2004 Texas Instruments |
| 23 | * Copyright (C) 2005 Dirk Behme |
| 24 | * |
| 25 | * This program is free software; you can redistribute it and/or modify |
| 26 | * it under the terms of the GNU General Public License version 2 as |
| 27 | * published by the Free Software Foundation. |
| 28 | */ |
| 29 | |
| 30 | #include <linux/input.h> |
| 31 | #include <linux/module.h> |
| 32 | #include <linux/of.h> |
| 33 | #include <linux/i2c.h> |
| 34 | #include <linux/interrupt.h> |
| 35 | #include <linux/irq.h> |
| 36 | |
| 37 | /* register addresses */ |
| 38 | #define I2C_REG_TOUCH0 0x00 |
| 39 | #define I2C_REG_TOUCH1 0x01 |
| 40 | #define I2C_REG_CHANMASK 0x04 |
| 41 | #define I2C_REG_IRQMASK 0x22 |
| 42 | #define I2C_REG_IRQSRC 0x23 |
| 43 | #define I2C_REG_SOFTRESET 0x3f |
| 44 | |
| 45 | /* commands */ |
| 46 | #define CMD_READ_REGISTER 0x40 |
| 47 | #define CMD_MANUAL 0xc0 |
| 48 | #define CMD_PENTRG 0xe0 |
| 49 | |
| 50 | /* value for I2C_REG_SOFTRESET */ |
| 51 | #define SOFTRESET_VALUE 0xde |
| 52 | |
| 53 | /* bits for I2C_REG_IRQSRC */ |
| 54 | #define IRQ_PENTOUCH_TOUCHCONVDONE 0x08 |
| 55 | #define IRQ_PENRELEASE 0x04 |
| 56 | |
| 57 | /* bits for RegTouch1 */ |
| 58 | #define CONDIRQ 0x20 |
| 59 | #define FILT_7SA 0x03 |
| 60 | |
| 61 | /* bits for I2C_REG_CHANMASK */ |
| 62 | #define CONV_X 0x80 |
| 63 | #define CONV_Y 0x40 |
| 64 | |
| 65 | /* coordinates rate: higher nibble of CTRL0 register */ |
| 66 | #define RATE_MANUAL 0x00 |
| 67 | #define RATE_5000CPS 0xf0 |
| 68 | |
| 69 | /* power delay: lower nibble of CTRL0 register */ |
| 70 | #define POWDLY_1_1MS 0x0b |
| 71 | |
| 72 | #define MAX_12BIT ((1 << 12) - 1) |
| 73 | |
| 74 | struct sx8654 { |
| 75 | struct input_dev *input; |
| 76 | struct i2c_client *client; |
| 77 | }; |
| 78 | |
| 79 | static irqreturn_t sx8654_irq(int irq, void *handle) |
| 80 | { |
| 81 | struct sx8654 *sx8654 = handle; |
Dan Carpenter | b6310af | 2015-03-11 10:42:13 -0700 | [diff] [blame] | 82 | int irqsrc; |
Sébastien Szymanski | 902cb3a | 2015-03-06 16:49:38 -0800 | [diff] [blame] | 83 | u8 data[4]; |
| 84 | unsigned int x, y; |
| 85 | int retval; |
| 86 | |
| 87 | irqsrc = i2c_smbus_read_byte_data(sx8654->client, |
| 88 | CMD_READ_REGISTER | I2C_REG_IRQSRC); |
| 89 | dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc); |
| 90 | |
| 91 | if (irqsrc < 0) |
| 92 | goto out; |
| 93 | |
| 94 | if (irqsrc & IRQ_PENRELEASE) { |
| 95 | dev_dbg(&sx8654->client->dev, "pen release interrupt"); |
| 96 | |
| 97 | input_report_key(sx8654->input, BTN_TOUCH, 0); |
| 98 | input_sync(sx8654->input); |
| 99 | } |
| 100 | |
| 101 | if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) { |
| 102 | dev_dbg(&sx8654->client->dev, "pen touch interrupt"); |
| 103 | |
| 104 | retval = i2c_master_recv(sx8654->client, data, sizeof(data)); |
| 105 | if (retval != sizeof(data)) |
| 106 | goto out; |
| 107 | |
| 108 | /* invalid data */ |
| 109 | if (unlikely(data[0] & 0x80 || data[2] & 0x80)) |
| 110 | goto out; |
| 111 | |
| 112 | x = ((data[0] & 0xf) << 8) | (data[1]); |
| 113 | y = ((data[2] & 0xf) << 8) | (data[3]); |
| 114 | |
| 115 | input_report_abs(sx8654->input, ABS_X, x); |
| 116 | input_report_abs(sx8654->input, ABS_Y, y); |
| 117 | input_report_key(sx8654->input, BTN_TOUCH, 1); |
| 118 | input_sync(sx8654->input); |
| 119 | |
| 120 | dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y); |
| 121 | } |
| 122 | |
| 123 | out: |
| 124 | return IRQ_HANDLED; |
| 125 | } |
| 126 | |
| 127 | static int sx8654_open(struct input_dev *dev) |
| 128 | { |
| 129 | struct sx8654 *sx8654 = input_get_drvdata(dev); |
| 130 | struct i2c_client *client = sx8654->client; |
| 131 | int error; |
| 132 | |
| 133 | /* enable pen trigger mode */ |
| 134 | error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, |
| 135 | RATE_5000CPS | POWDLY_1_1MS); |
| 136 | if (error) { |
| 137 | dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed"); |
| 138 | return error; |
| 139 | } |
| 140 | |
| 141 | error = i2c_smbus_write_byte(client, CMD_PENTRG); |
| 142 | if (error) { |
| 143 | dev_err(&client->dev, "writing command CMD_PENTRG failed"); |
| 144 | return error; |
| 145 | } |
| 146 | |
| 147 | enable_irq(client->irq); |
| 148 | |
| 149 | return 0; |
| 150 | } |
| 151 | |
| 152 | static void sx8654_close(struct input_dev *dev) |
| 153 | { |
| 154 | struct sx8654 *sx8654 = input_get_drvdata(dev); |
| 155 | struct i2c_client *client = sx8654->client; |
| 156 | int error; |
| 157 | |
| 158 | disable_irq(client->irq); |
| 159 | |
| 160 | /* enable manual mode mode */ |
| 161 | error = i2c_smbus_write_byte(client, CMD_MANUAL); |
| 162 | if (error) { |
| 163 | dev_err(&client->dev, "writing command CMD_MANUAL failed"); |
| 164 | return; |
| 165 | } |
| 166 | |
| 167 | error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0); |
| 168 | if (error) { |
| 169 | dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed"); |
| 170 | return; |
| 171 | } |
| 172 | } |
| 173 | |
| 174 | static int sx8654_probe(struct i2c_client *client, |
| 175 | const struct i2c_device_id *id) |
| 176 | { |
| 177 | struct sx8654 *sx8654; |
| 178 | struct input_dev *input; |
| 179 | int error; |
| 180 | |
| 181 | if (!i2c_check_functionality(client->adapter, |
| 182 | I2C_FUNC_SMBUS_READ_WORD_DATA)) |
| 183 | return -ENXIO; |
| 184 | |
| 185 | sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL); |
| 186 | if (!sx8654) |
| 187 | return -ENOMEM; |
| 188 | |
| 189 | input = devm_input_allocate_device(&client->dev); |
Dmitry Torokhov | 22ffc3e | 2015-05-04 12:45:38 -0700 | [diff] [blame] | 190 | if (!input) |
Sébastien Szymanski | 902cb3a | 2015-03-06 16:49:38 -0800 | [diff] [blame] | 191 | return -ENOMEM; |
| 192 | |
| 193 | input->name = "SX8654 I2C Touchscreen"; |
| 194 | input->id.bustype = BUS_I2C; |
| 195 | input->dev.parent = &client->dev; |
| 196 | input->open = sx8654_open; |
| 197 | input->close = sx8654_close; |
| 198 | |
| 199 | __set_bit(INPUT_PROP_DIRECT, input->propbit); |
| 200 | input_set_capability(input, EV_KEY, BTN_TOUCH); |
| 201 | input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0); |
| 202 | input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0); |
| 203 | |
| 204 | sx8654->client = client; |
| 205 | sx8654->input = input; |
| 206 | |
| 207 | input_set_drvdata(sx8654->input, sx8654); |
| 208 | |
| 209 | error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET, |
| 210 | SOFTRESET_VALUE); |
| 211 | if (error) { |
| 212 | dev_err(&client->dev, "writing softreset value failed"); |
| 213 | return error; |
| 214 | } |
| 215 | |
| 216 | error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK, |
| 217 | CONV_X | CONV_Y); |
| 218 | if (error) { |
| 219 | dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed"); |
| 220 | return error; |
| 221 | } |
| 222 | |
| 223 | error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK, |
| 224 | IRQ_PENTOUCH_TOUCHCONVDONE | |
| 225 | IRQ_PENRELEASE); |
| 226 | if (error) { |
| 227 | dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed"); |
| 228 | return error; |
| 229 | } |
| 230 | |
| 231 | error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1, |
| 232 | CONDIRQ | FILT_7SA); |
| 233 | if (error) { |
| 234 | dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed"); |
| 235 | return error; |
| 236 | } |
| 237 | |
| 238 | error = devm_request_threaded_irq(&client->dev, client->irq, |
| 239 | NULL, sx8654_irq, |
| 240 | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| 241 | client->name, sx8654); |
| 242 | if (error) { |
| 243 | dev_err(&client->dev, |
| 244 | "Failed to enable IRQ %d, error: %d\n", |
| 245 | client->irq, error); |
| 246 | return error; |
| 247 | } |
| 248 | |
| 249 | /* Disable the IRQ, we'll enable it in sx8654_open() */ |
| 250 | disable_irq(client->irq); |
| 251 | |
| 252 | error = input_register_device(sx8654->input); |
| 253 | if (error) |
| 254 | return error; |
| 255 | |
| 256 | i2c_set_clientdata(client, sx8654); |
| 257 | return 0; |
| 258 | } |
| 259 | |
| 260 | #ifdef CONFIG_OF |
| 261 | static const struct of_device_id sx8654_of_match[] = { |
| 262 | { .compatible = "semtech,sx8654", }, |
| 263 | { }, |
| 264 | }; |
| 265 | MODULE_DEVICE_TABLE(of, sx8654_of_match); |
| 266 | #endif |
| 267 | |
| 268 | static const struct i2c_device_id sx8654_id_table[] = { |
| 269 | { "semtech_sx8654", 0 }, |
| 270 | { }, |
| 271 | }; |
| 272 | MODULE_DEVICE_TABLE(i2c, sx8654_id_table); |
| 273 | |
| 274 | static struct i2c_driver sx8654_driver = { |
| 275 | .driver = { |
| 276 | .name = "sx8654", |
| 277 | .of_match_table = of_match_ptr(sx8654_of_match), |
| 278 | }, |
| 279 | .id_table = sx8654_id_table, |
| 280 | .probe = sx8654_probe, |
| 281 | }; |
| 282 | module_i2c_driver(sx8654_driver); |
| 283 | |
| 284 | MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>"); |
| 285 | MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver"); |
| 286 | MODULE_LICENSE("GPL"); |