Florian Fainelli | 092ccf0 | 2017-07-18 12:37:37 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2017 Broadcom |
| 3 | * Author: Florian Fainelli <f.fainelli@gmail.com> |
| 4 | * |
| 5 | * Licensed under the ISC license. |
| 6 | */ |
| 7 | |
| 8 | /dts-v1/; |
| 9 | |
| 10 | #include "bcm53573.dtsi" |
| 11 | |
| 12 | / { |
| 13 | compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573"; |
| 14 | model = "Broadcom BCM947189ACDBMR"; |
| 15 | |
| 16 | chosen { |
| 17 | bootargs = "console=ttyS0,115200 earlycon"; |
| 18 | }; |
| 19 | |
| 20 | memory { |
| 21 | reg = <0x00000000 0x08000000>; |
| 22 | }; |
| 23 | |
| 24 | leds { |
| 25 | compatible = "gpio-leds"; |
| 26 | |
| 27 | wps { |
| 28 | label = "bcm53xx:blue:wps"; |
| 29 | gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; |
| 30 | }; |
| 31 | |
| 32 | 5ghz { |
| 33 | label = "bcm53xx:blue:5ghz"; |
| 34 | gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; |
| 35 | }; |
| 36 | |
| 37 | 2ghz { |
| 38 | label = "bcm53xx:blue:2ghz"; |
| 39 | gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; |
| 40 | }; |
| 41 | }; |
| 42 | |
| 43 | gpio-keys { |
| 44 | compatible = "gpio-keys"; |
| 45 | #address-cells = <1>; |
| 46 | #size-cells = <0>; |
| 47 | |
| 48 | restart { |
| 49 | label = "Reset"; |
| 50 | linux,code = <KEY_RESTART>; |
| 51 | gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; |
| 52 | }; |
| 53 | |
| 54 | wps { |
| 55 | label = "WPS"; |
| 56 | linux,code = <KEY_WPS_BUTTON>; |
| 57 | gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; |
| 58 | }; |
| 59 | }; |
| 60 | |
| 61 | spi { |
| 62 | compatible = "spi-gpio"; |
| 63 | num-chipselects = <1>; |
| 64 | gpio-sck = <&chipcommon 21 0>; |
| 65 | gpio-miso = <&chipcommon 22 0>; |
| 66 | gpio-mosi = <&chipcommon 23 0>; |
| 67 | cs-gpios = <&chipcommon 24 0>; |
| 68 | #address-cells = <1>; |
| 69 | #size-cells = <0>; |
| 70 | |
| 71 | /* External BCM6802 MoCA chip is connected */ |
| 72 | }; |
| 73 | }; |
| 74 | |
| 75 | &pcie0 { |
| 76 | ranges = <0x00000000 0 0 0 0 0x00100000>; |
| 77 | #address-cells = <3>; |
| 78 | #size-cells = <2>; |
| 79 | |
| 80 | bridge@0,0,0 { |
| 81 | reg = <0x0000 0 0 0 0>; |
| 82 | ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; |
| 83 | #address-cells = <3>; |
| 84 | #size-cells = <2>; |
| 85 | |
| 86 | wifi@0,1,0 { |
| 87 | reg = <0x0000 0 0 0 0>; |
| 88 | ranges = <0x00000000 0 0 0 0x00100000>; |
| 89 | #address-cells = <1>; |
| 90 | #size-cells = <1>; |
| 91 | }; |
| 92 | }; |
| 93 | }; |
| 94 | |
| 95 | &usb2 { |
| 96 | vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>; |
| 97 | }; |