Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 5230f8fe9ad870ac24f23bca496347b87185c7c5 / . / arch / arm / boot / dts / imx27.dtsi
blob: 5303ab680a3461614e324b27ed455f7da01b253d [file] [log] [blame]
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]1/*
2 * Copyright 2012 Sascha Hauer, Pengutronix
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/include/ "skeleton.dtsi"
13
14/ {
15 aliases {
16 serial0 = &uart1;
17 serial1 = &uart2;
18 serial2 = &uart3;
19 serial3 = &uart4;
20 serial4 = &uart5;
21 serial5 = &uart6;
Shawn Guo5230f8f2012-08-05 14:01:28 +0800[diff] [blame^]22 gpio0 = &gpio1;
23 gpio1 = &gpio2;
24 gpio2 = &gpio3;
25 gpio3 = &gpio4;
26 gpio4 = &gpio5;
27 gpio5 = &gpio6;
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]28 };
29
30 avic: avic-interrupt-controller@e0000000 {
31 compatible = "fsl,imx27-avic", "fsl,avic";
32 interrupt-controller;
33 #interrupt-cells = <1>;
34 reg = <0x10040000 0x1000>;
35 };
36
37 clocks {
38 #address-cells = <1>;
39 #size-cells = <0>;
40
41 osc26m {
42 compatible = "fsl,imx-osc26m", "fixed-clock";
43 clock-frequency = <26000000>;
44 };
45 };
46
47 soc {
48 #address-cells = <1>;
49 #size-cells = <1>;
50 compatible = "simple-bus";
51 interrupt-parent = <&avic>;
52 ranges;
53
54 aipi@10000000 { /* AIPI1 */
55 compatible = "fsl,aipi-bus", "simple-bus";
56 #address-cells = <1>;
57 #size-cells = <1>;
58 reg = <0x10000000 0x10000000>;
59 ranges;
60
61 wdog@10002000 {
62 compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
63 reg = <0x10002000 0x4000>;
64 interrupts = <27>;
65 status = "disabled";
66 };
67
Shawn Guo0c456cf2012-04-02 14:39:26 +0800[diff] [blame]68 uart1: serial@1000a000 {
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]69 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
70 reg = <0x1000a000 0x1000>;
71 interrupts = <20>;
72 status = "disabled";
73 };
74
Shawn Guo0c456cf2012-04-02 14:39:26 +0800[diff] [blame]75 uart2: serial@1000b000 {
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]76 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
77 reg = <0x1000b000 0x1000>;
78 interrupts = <19>;
79 status = "disabled";
80 };
81
Shawn Guo0c456cf2012-04-02 14:39:26 +0800[diff] [blame]82 uart3: serial@1000c000 {
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]83 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
84 reg = <0x1000c000 0x1000>;
85 interrupts = <18>;
86 status = "disabled";
87 };
88
Shawn Guo0c456cf2012-04-02 14:39:26 +0800[diff] [blame]89 uart4: serial@1000d000 {
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]90 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
91 reg = <0x1000d000 0x1000>;
92 interrupts = <17>;
93 status = "disabled";
94 };
95
96 cspi1: cspi@1000e000 {
97 #address-cells = <1>;
98 #size-cells = <0>;
99 compatible = "fsl,imx27-cspi";
100 reg = <0x1000e000 0x1000>;
101 interrupts = <16>;
102 status = "disabled";
103 };
104
105 cspi2: cspi@1000f000 {
106 #address-cells = <1>;
107 #size-cells = <0>;
108 compatible = "fsl,imx27-cspi";
109 reg = <0x1000f000 0x1000>;
110 interrupts = <15>;
111 status = "disabled";
112 };
113
114 i2c1: i2c@10012000 {
115 #address-cells = <1>;
116 #size-cells = <0>;
117 compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
118 reg = <0x10012000 0x1000>;
119 interrupts = <12>;
120 status = "disabled";
121 };
122
123 gpio1: gpio@10015000 {
124 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
125 reg = <0x10015000 0x100>;
126 interrupts = <8>;
127 gpio-controller;
128 #gpio-cells = <2>;
129 interrupt-controller;
Shawn Guo88cde8b2012-07-06 20:03:37 +0800[diff] [blame]130 #interrupt-cells = <2>;
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]131 };
132
133 gpio2: gpio@10015100 {
134 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
135 reg = <0x10015100 0x100>;
136 interrupts = <8>;
137 gpio-controller;
138 #gpio-cells = <2>;
139 interrupt-controller;
Shawn Guo88cde8b2012-07-06 20:03:37 +0800[diff] [blame]140 #interrupt-cells = <2>;
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]141 };
142
143 gpio3: gpio@10015200 {
144 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
145 reg = <0x10015200 0x100>;
146 interrupts = <8>;
147 gpio-controller;
148 #gpio-cells = <2>;
149 interrupt-controller;
Shawn Guo88cde8b2012-07-06 20:03:37 +0800[diff] [blame]150 #interrupt-cells = <2>;
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]151 };
152
153 gpio4: gpio@10015300 {
154 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
155 reg = <0x10015300 0x100>;
156 interrupts = <8>;
157 gpio-controller;
158 #gpio-cells = <2>;
159 interrupt-controller;
Shawn Guo88cde8b2012-07-06 20:03:37 +0800[diff] [blame]160 #interrupt-cells = <2>;
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]161 };
162
163 gpio5: gpio@10015400 {
164 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
165 reg = <0x10015400 0x100>;
166 interrupts = <8>;
167 gpio-controller;
168 #gpio-cells = <2>;
169 interrupt-controller;
Shawn Guo88cde8b2012-07-06 20:03:37 +0800[diff] [blame]170 #interrupt-cells = <2>;
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]171 };
172
173 gpio6: gpio@10015500 {
174 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
175 reg = <0x10015500 0x100>;
176 interrupts = <8>;
177 gpio-controller;
178 #gpio-cells = <2>;
179 interrupt-controller;
Shawn Guo88cde8b2012-07-06 20:03:37 +0800[diff] [blame]180 #interrupt-cells = <2>;
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]181 };
182
183 cspi3: cspi@10017000 {
184 #address-cells = <1>;
185 #size-cells = <0>;
186 compatible = "fsl,imx27-cspi";
187 reg = <0x10017000 0x1000>;
188 interrupts = <6>;
189 status = "disabled";
190 };
191
Shawn Guo0c456cf2012-04-02 14:39:26 +0800[diff] [blame]192 uart5: serial@1001b000 {
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]193 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
194 reg = <0x1001b000 0x1000>;
195 interrupts = <49>;
196 status = "disabled";
197 };
198
Shawn Guo0c456cf2012-04-02 14:39:26 +0800[diff] [blame]199 uart6: serial@1001c000 {
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]200 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
201 reg = <0x1001c000 0x1000>;
202 interrupts = <48>;
203 status = "disabled";
204 };
205
206 i2c2: i2c@1001d000 {
207 #address-cells = <1>;
208 #size-cells = <0>;
209 compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
210 reg = <0x1001d000 0x1000>;
211 interrupts = <1>;
212 status = "disabled";
213 };
214
Shawn Guo0c456cf2012-04-02 14:39:26 +0800[diff] [blame]215 fec: ethernet@1002b000 {
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]216 compatible = "fsl,imx27-fec";
217 reg = <0x1002b000 0x4000>;
218 interrupts = <50>;
219 status = "disabled";
220 };
221 };
Uwe Kleine-König37787362012-04-23 11:23:42 +0200[diff] [blame]222 nand@d8000000 {
223 #address-cells = <1>;
224 #size-cells = <1>;
225
226 compatible = "fsl,imx27-nand";
227 reg = <0xd8000000 0x1000>;
228 interrupts = <29>;
229 status = "disabled";
230 };
Sascha Hauer9f0749e2012-02-28 21:57:50 +0100[diff] [blame]231 };
232};