Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 1 | /* |
Jubin John | 05d6ac1 | 2016-02-14 20:22:17 -0800 | [diff] [blame] | 2 | * Copyright(c) 2015, 2016 Intel Corporation. |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 3 | * |
| 4 | * This file is provided under a dual BSD/GPLv2 license. When using or |
| 5 | * redistributing this file, you may do so under either license. |
| 6 | * |
| 7 | * GPL LICENSE SUMMARY |
| 8 | * |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of version 2 of the GNU General Public License as |
| 11 | * published by the Free Software Foundation. |
| 12 | * |
| 13 | * This program is distributed in the hope that it will be useful, but |
| 14 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 16 | * General Public License for more details. |
| 17 | * |
| 18 | * BSD LICENSE |
| 19 | * |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 20 | * Redistribution and use in source and binary forms, with or without |
| 21 | * modification, are permitted provided that the following conditions |
| 22 | * are met: |
| 23 | * |
| 24 | * - Redistributions of source code must retain the above copyright |
| 25 | * notice, this list of conditions and the following disclaimer. |
| 26 | * - Redistributions in binary form must reproduce the above copyright |
| 27 | * notice, this list of conditions and the following disclaimer in |
| 28 | * the documentation and/or other materials provided with the |
| 29 | * distribution. |
| 30 | * - Neither the name of Intel Corporation nor the names of its |
| 31 | * contributors may be used to endorse or promote products derived |
| 32 | * from this software without specific prior written permission. |
| 33 | * |
| 34 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| 35 | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| 36 | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| 37 | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| 38 | * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| 39 | * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| 40 | * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| 41 | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| 42 | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 43 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| 44 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 45 | * |
| 46 | */ |
Easwar Hariharan | c3838b3 | 2016-02-09 14:29:13 -0800 | [diff] [blame] | 47 | |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 48 | #include "hfi.h" |
Easwar Hariharan | c3838b3 | 2016-02-09 14:29:13 -0800 | [diff] [blame] | 49 | #include "efivar.h" |
Dean Luick | e83eba2 | 2016-09-30 04:41:45 -0700 | [diff] [blame] | 50 | #include "eprom.h" |
Easwar Hariharan | c3838b3 | 2016-02-09 14:29:13 -0800 | [diff] [blame] | 51 | |
| 52 | void get_platform_config(struct hfi1_devdata *dd) |
| 53 | { |
| 54 | int ret = 0; |
| 55 | unsigned long size = 0; |
| 56 | u8 *temp_platform_config = NULL; |
Dean Luick | e83eba2 | 2016-09-30 04:41:45 -0700 | [diff] [blame] | 57 | u32 esize; |
| 58 | |
| 59 | ret = eprom_read_platform_config(dd, (void **)&temp_platform_config, |
| 60 | &esize); |
| 61 | if (!ret) { |
| 62 | /* success */ |
| 63 | size = esize; |
| 64 | goto success; |
| 65 | } |
| 66 | /* fail, try EFI variable */ |
Easwar Hariharan | c3838b3 | 2016-02-09 14:29:13 -0800 | [diff] [blame] | 67 | |
| 68 | ret = read_hfi1_efi_var(dd, "configuration", &size, |
| 69 | (void **)&temp_platform_config); |
Dean Luick | e83eba2 | 2016-09-30 04:41:45 -0700 | [diff] [blame] | 70 | if (!ret) |
| 71 | goto success; |
Easwar Hariharan | c3838b3 | 2016-02-09 14:29:13 -0800 | [diff] [blame] | 72 | |
Dean Luick | e83eba2 | 2016-09-30 04:41:45 -0700 | [diff] [blame] | 73 | dd_dev_info(dd, |
| 74 | "%s: Failed to get platform config from UEFI, falling back to request firmware\n", |
| 75 | __func__); |
| 76 | /* fall back to request firmware */ |
| 77 | platform_config_load = 1; |
| 78 | return; |
| 79 | |
| 80 | success: |
Easwar Hariharan | c3838b3 | 2016-02-09 14:29:13 -0800 | [diff] [blame] | 81 | dd->platform_config.data = temp_platform_config; |
| 82 | dd->platform_config.size = size; |
Easwar Hariharan | c3838b3 | 2016-02-09 14:29:13 -0800 | [diff] [blame] | 83 | } |
| 84 | |
| 85 | void free_platform_config(struct hfi1_devdata *dd) |
| 86 | { |
| 87 | if (!platform_config_load) { |
| 88 | /* |
| 89 | * was loaded from EFI, release memory |
| 90 | * allocated by read_efi_var |
| 91 | */ |
| 92 | kfree(dd->platform_config.data); |
| 93 | } |
| 94 | /* |
| 95 | * else do nothing, dispose_firmware will release |
| 96 | * struct firmware platform_config on driver exit |
| 97 | */ |
| 98 | } |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 99 | |
Easwar Hariharan | 9775a99 | 2016-05-12 10:22:39 -0700 | [diff] [blame] | 100 | void get_port_type(struct hfi1_pportdata *ppd) |
| 101 | { |
| 102 | int ret; |
| 103 | |
| 104 | ret = get_platform_config_field(ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| 105 | PORT_TABLE_PORT_TYPE, &ppd->port_type, |
| 106 | 4); |
| 107 | if (ret) |
| 108 | ppd->port_type = PORT_TYPE_UNKNOWN; |
| 109 | } |
| 110 | |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 111 | int set_qsfp_tx(struct hfi1_pportdata *ppd, int on) |
| 112 | { |
| 113 | u8 tx_ctrl_byte = on ? 0x0 : 0xF; |
| 114 | int ret = 0; |
| 115 | |
| 116 | ret = qsfp_write(ppd, ppd->dd->hfi1_id, QSFP_TX_CTRL_BYTE_OFFS, |
| 117 | &tx_ctrl_byte, 1); |
| 118 | /* we expected 1, so consider 0 an error */ |
| 119 | if (ret == 0) |
| 120 | ret = -EIO; |
| 121 | else if (ret == 1) |
| 122 | ret = 0; |
| 123 | return ret; |
| 124 | } |
| 125 | |
| 126 | static int qual_power(struct hfi1_pportdata *ppd) |
| 127 | { |
| 128 | u32 cable_power_class = 0, power_class_max = 0; |
| 129 | u8 *cache = ppd->qsfp_info.cache; |
| 130 | int ret = 0; |
| 131 | |
| 132 | ret = get_platform_config_field( |
| 133 | ppd->dd, PLATFORM_CONFIG_SYSTEM_TABLE, 0, |
| 134 | SYSTEM_TABLE_QSFP_POWER_CLASS_MAX, &power_class_max, 4); |
| 135 | if (ret) |
| 136 | return ret; |
| 137 | |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 138 | cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 139 | |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 140 | if (cable_power_class > power_class_max) |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 141 | ppd->offline_disabled_reason = |
| 142 | HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 143 | |
| 144 | if (ppd->offline_disabled_reason == |
| 145 | HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY)) { |
| 146 | dd_dev_info( |
| 147 | ppd->dd, |
| 148 | "%s: Port disabled due to system power restrictions\n", |
| 149 | __func__); |
| 150 | ret = -EPERM; |
| 151 | } |
| 152 | return ret; |
| 153 | } |
| 154 | |
| 155 | static int qual_bitrate(struct hfi1_pportdata *ppd) |
| 156 | { |
| 157 | u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled; |
| 158 | u8 *cache = ppd->qsfp_info.cache; |
| 159 | |
| 160 | if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G) && |
| 161 | cache[QSFP_NOM_BIT_RATE_250_OFFS] < 0x64) |
| 162 | ppd->offline_disabled_reason = |
| 163 | HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY); |
| 164 | |
| 165 | if ((lss & OPA_LINK_SPEED_12_5G) && (lse & OPA_LINK_SPEED_12_5G) && |
| 166 | cache[QSFP_NOM_BIT_RATE_100_OFFS] < 0x7D) |
| 167 | ppd->offline_disabled_reason = |
| 168 | HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY); |
| 169 | |
| 170 | if (ppd->offline_disabled_reason == |
| 171 | HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY)) { |
| 172 | dd_dev_info( |
| 173 | ppd->dd, |
| 174 | "%s: Cable failed bitrate check, disabling port\n", |
| 175 | __func__); |
| 176 | return -EPERM; |
| 177 | } |
| 178 | return 0; |
| 179 | } |
| 180 | |
| 181 | static int set_qsfp_high_power(struct hfi1_pportdata *ppd) |
| 182 | { |
| 183 | u8 cable_power_class = 0, power_ctrl_byte = 0; |
| 184 | u8 *cache = ppd->qsfp_info.cache; |
| 185 | int ret; |
| 186 | |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 187 | cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 188 | |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 189 | if (cable_power_class > QSFP_POWER_CLASS_1) { |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 190 | power_ctrl_byte = cache[QSFP_PWR_CTRL_BYTE_OFFS]; |
| 191 | |
| 192 | power_ctrl_byte |= 1; |
| 193 | power_ctrl_byte &= ~(0x2); |
| 194 | |
| 195 | ret = qsfp_write(ppd, ppd->dd->hfi1_id, |
| 196 | QSFP_PWR_CTRL_BYTE_OFFS, |
| 197 | &power_ctrl_byte, 1); |
| 198 | if (ret != 1) |
| 199 | return -EIO; |
| 200 | |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 201 | if (cable_power_class > QSFP_POWER_CLASS_4) { |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 202 | power_ctrl_byte |= (1 << 2); |
| 203 | ret = qsfp_write(ppd, ppd->dd->hfi1_id, |
| 204 | QSFP_PWR_CTRL_BYTE_OFFS, |
| 205 | &power_ctrl_byte, 1); |
| 206 | if (ret != 1) |
| 207 | return -EIO; |
| 208 | } |
| 209 | |
| 210 | /* SFF 8679 rev 1.7 LPMode Deassert time */ |
| 211 | msleep(300); |
| 212 | } |
| 213 | return 0; |
| 214 | } |
| 215 | |
| 216 | static void apply_rx_cdr(struct hfi1_pportdata *ppd, |
| 217 | u32 rx_preset_index, |
| 218 | u8 *cdr_ctrl_byte) |
| 219 | { |
| 220 | u32 rx_preset; |
| 221 | u8 *cache = ppd->qsfp_info.cache; |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 222 | int cable_power_class; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 223 | |
| 224 | if (!((cache[QSFP_MOD_PWR_OFFS] & 0x4) && |
| 225 | (cache[QSFP_CDR_INFO_OFFS] & 0x40))) |
| 226 | return; |
| 227 | |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 228 | /* RX CDR present, bypass supported */ |
| 229 | cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]); |
| 230 | |
| 231 | if (cable_power_class <= QSFP_POWER_CLASS_3) { |
| 232 | /* Power class <= 3, ignore config & turn RX CDR on */ |
| 233 | *cdr_ctrl_byte |= 0xF; |
| 234 | return; |
| 235 | } |
| 236 | |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 237 | get_platform_config_field( |
| 238 | ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, |
| 239 | rx_preset_index, RX_PRESET_TABLE_QSFP_RX_CDR_APPLY, |
| 240 | &rx_preset, 4); |
| 241 | |
| 242 | if (!rx_preset) { |
| 243 | dd_dev_info( |
| 244 | ppd->dd, |
| 245 | "%s: RX_CDR_APPLY is set to disabled\n", |
| 246 | __func__); |
| 247 | return; |
| 248 | } |
| 249 | get_platform_config_field( |
| 250 | ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, |
| 251 | rx_preset_index, RX_PRESET_TABLE_QSFP_RX_CDR, |
| 252 | &rx_preset, 4); |
| 253 | |
| 254 | /* Expand cdr setting to all 4 lanes */ |
| 255 | rx_preset = (rx_preset | (rx_preset << 1) | |
| 256 | (rx_preset << 2) | (rx_preset << 3)); |
| 257 | |
| 258 | if (rx_preset) { |
| 259 | *cdr_ctrl_byte |= rx_preset; |
| 260 | } else { |
| 261 | *cdr_ctrl_byte &= rx_preset; |
| 262 | /* Preserve current TX CDR status */ |
| 263 | *cdr_ctrl_byte |= (cache[QSFP_CDR_CTRL_BYTE_OFFS] & 0xF0); |
| 264 | } |
| 265 | } |
| 266 | |
| 267 | static void apply_tx_cdr(struct hfi1_pportdata *ppd, |
| 268 | u32 tx_preset_index, |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 269 | u8 *cdr_ctrl_byte) |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 270 | { |
| 271 | u32 tx_preset; |
| 272 | u8 *cache = ppd->qsfp_info.cache; |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 273 | int cable_power_class; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 274 | |
| 275 | if (!((cache[QSFP_MOD_PWR_OFFS] & 0x8) && |
| 276 | (cache[QSFP_CDR_INFO_OFFS] & 0x80))) |
| 277 | return; |
| 278 | |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 279 | /* TX CDR present, bypass supported */ |
| 280 | cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]); |
| 281 | |
| 282 | if (cable_power_class <= QSFP_POWER_CLASS_3) { |
| 283 | /* Power class <= 3, ignore config & turn TX CDR on */ |
| 284 | *cdr_ctrl_byte |= 0xF0; |
| 285 | return; |
| 286 | } |
| 287 | |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 288 | get_platform_config_field( |
| 289 | ppd->dd, |
| 290 | PLATFORM_CONFIG_TX_PRESET_TABLE, tx_preset_index, |
| 291 | TX_PRESET_TABLE_QSFP_TX_CDR_APPLY, &tx_preset, 4); |
| 292 | |
| 293 | if (!tx_preset) { |
| 294 | dd_dev_info( |
| 295 | ppd->dd, |
| 296 | "%s: TX_CDR_APPLY is set to disabled\n", |
| 297 | __func__); |
| 298 | return; |
| 299 | } |
| 300 | get_platform_config_field( |
| 301 | ppd->dd, |
| 302 | PLATFORM_CONFIG_TX_PRESET_TABLE, |
| 303 | tx_preset_index, |
| 304 | TX_PRESET_TABLE_QSFP_TX_CDR, &tx_preset, 4); |
| 305 | |
| 306 | /* Expand cdr setting to all 4 lanes */ |
| 307 | tx_preset = (tx_preset | (tx_preset << 1) | |
| 308 | (tx_preset << 2) | (tx_preset << 3)); |
| 309 | |
| 310 | if (tx_preset) |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 311 | *cdr_ctrl_byte |= (tx_preset << 4); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 312 | else |
| 313 | /* Preserve current/determined RX CDR status */ |
Easwar Hariharan | 145dd2b | 2016-04-12 11:25:31 -0700 | [diff] [blame] | 314 | *cdr_ctrl_byte &= ((tx_preset << 4) | 0xF); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 315 | } |
| 316 | |
| 317 | static void apply_cdr_settings( |
| 318 | struct hfi1_pportdata *ppd, u32 rx_preset_index, |
| 319 | u32 tx_preset_index) |
| 320 | { |
| 321 | u8 *cache = ppd->qsfp_info.cache; |
| 322 | u8 cdr_ctrl_byte = cache[QSFP_CDR_CTRL_BYTE_OFFS]; |
| 323 | |
| 324 | apply_rx_cdr(ppd, rx_preset_index, &cdr_ctrl_byte); |
| 325 | |
| 326 | apply_tx_cdr(ppd, tx_preset_index, &cdr_ctrl_byte); |
| 327 | |
| 328 | qsfp_write(ppd, ppd->dd->hfi1_id, QSFP_CDR_CTRL_BYTE_OFFS, |
| 329 | &cdr_ctrl_byte, 1); |
| 330 | } |
| 331 | |
| 332 | static void apply_tx_eq_auto(struct hfi1_pportdata *ppd) |
| 333 | { |
| 334 | u8 *cache = ppd->qsfp_info.cache; |
| 335 | u8 tx_eq; |
| 336 | |
| 337 | if (!(cache[QSFP_EQ_INFO_OFFS] & 0x8)) |
| 338 | return; |
| 339 | /* Disable adaptive TX EQ if present */ |
| 340 | tx_eq = cache[(128 * 3) + 241]; |
| 341 | tx_eq &= 0xF0; |
| 342 | qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 241, &tx_eq, 1); |
| 343 | } |
| 344 | |
| 345 | static void apply_tx_eq_prog(struct hfi1_pportdata *ppd, u32 tx_preset_index) |
| 346 | { |
| 347 | u8 *cache = ppd->qsfp_info.cache; |
| 348 | u32 tx_preset; |
| 349 | u8 tx_eq; |
| 350 | |
| 351 | if (!(cache[QSFP_EQ_INFO_OFFS] & 0x4)) |
| 352 | return; |
| 353 | |
| 354 | get_platform_config_field( |
| 355 | ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, |
| 356 | tx_preset_index, TX_PRESET_TABLE_QSFP_TX_EQ_APPLY, |
| 357 | &tx_preset, 4); |
| 358 | if (!tx_preset) { |
| 359 | dd_dev_info( |
| 360 | ppd->dd, |
| 361 | "%s: TX_EQ_APPLY is set to disabled\n", |
| 362 | __func__); |
| 363 | return; |
| 364 | } |
| 365 | get_platform_config_field( |
| 366 | ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, |
| 367 | tx_preset_index, TX_PRESET_TABLE_QSFP_TX_EQ, |
| 368 | &tx_preset, 4); |
| 369 | |
| 370 | if (((cache[(128 * 3) + 224] & 0xF0) >> 4) < tx_preset) { |
| 371 | dd_dev_info( |
| 372 | ppd->dd, |
| 373 | "%s: TX EQ %x unsupported\n", |
| 374 | __func__, tx_preset); |
| 375 | |
| 376 | dd_dev_info( |
| 377 | ppd->dd, |
| 378 | "%s: Applying EQ %x\n", |
| 379 | __func__, cache[608] & 0xF0); |
| 380 | |
| 381 | tx_preset = (cache[608] & 0xF0) >> 4; |
| 382 | } |
| 383 | |
| 384 | tx_eq = tx_preset | (tx_preset << 4); |
| 385 | qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 234, &tx_eq, 1); |
| 386 | qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 235, &tx_eq, 1); |
| 387 | } |
| 388 | |
| 389 | static void apply_rx_eq_emp(struct hfi1_pportdata *ppd, u32 rx_preset_index) |
| 390 | { |
| 391 | u32 rx_preset; |
| 392 | u8 rx_eq, *cache = ppd->qsfp_info.cache; |
| 393 | |
| 394 | if (!(cache[QSFP_EQ_INFO_OFFS] & 0x2)) |
| 395 | return; |
| 396 | get_platform_config_field( |
| 397 | ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, |
| 398 | rx_preset_index, RX_PRESET_TABLE_QSFP_RX_EMP_APPLY, |
| 399 | &rx_preset, 4); |
| 400 | |
| 401 | if (!rx_preset) { |
| 402 | dd_dev_info( |
| 403 | ppd->dd, |
| 404 | "%s: RX_EMP_APPLY is set to disabled\n", |
| 405 | __func__); |
| 406 | return; |
| 407 | } |
| 408 | get_platform_config_field( |
| 409 | ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, |
| 410 | rx_preset_index, RX_PRESET_TABLE_QSFP_RX_EMP, |
| 411 | &rx_preset, 4); |
| 412 | |
| 413 | if ((cache[(128 * 3) + 224] & 0xF) < rx_preset) { |
| 414 | dd_dev_info( |
| 415 | ppd->dd, |
| 416 | "%s: Requested RX EMP %x\n", |
| 417 | __func__, rx_preset); |
| 418 | |
| 419 | dd_dev_info( |
| 420 | ppd->dd, |
| 421 | "%s: Applying supported EMP %x\n", |
| 422 | __func__, cache[608] & 0xF); |
| 423 | |
| 424 | rx_preset = cache[608] & 0xF; |
| 425 | } |
| 426 | |
| 427 | rx_eq = rx_preset | (rx_preset << 4); |
| 428 | |
| 429 | qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 236, &rx_eq, 1); |
| 430 | qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 237, &rx_eq, 1); |
| 431 | } |
| 432 | |
| 433 | static void apply_eq_settings(struct hfi1_pportdata *ppd, |
| 434 | u32 rx_preset_index, u32 tx_preset_index) |
| 435 | { |
| 436 | u8 *cache = ppd->qsfp_info.cache; |
| 437 | |
| 438 | /* no point going on w/o a page 3 */ |
| 439 | if (cache[2] & 4) { |
| 440 | dd_dev_info(ppd->dd, |
| 441 | "%s: Upper page 03 not present\n", |
| 442 | __func__); |
| 443 | return; |
| 444 | } |
| 445 | |
| 446 | apply_tx_eq_auto(ppd); |
| 447 | |
| 448 | apply_tx_eq_prog(ppd, tx_preset_index); |
| 449 | |
| 450 | apply_rx_eq_emp(ppd, rx_preset_index); |
| 451 | } |
| 452 | |
| 453 | static void apply_rx_amplitude_settings( |
| 454 | struct hfi1_pportdata *ppd, u32 rx_preset_index, |
| 455 | u32 tx_preset_index) |
| 456 | { |
| 457 | u32 rx_preset; |
| 458 | u8 rx_amp = 0, i = 0, preferred = 0, *cache = ppd->qsfp_info.cache; |
| 459 | |
| 460 | /* no point going on w/o a page 3 */ |
| 461 | if (cache[2] & 4) { |
| 462 | dd_dev_info(ppd->dd, |
| 463 | "%s: Upper page 03 not present\n", |
| 464 | __func__); |
| 465 | return; |
| 466 | } |
| 467 | if (!(cache[QSFP_EQ_INFO_OFFS] & 0x1)) { |
| 468 | dd_dev_info(ppd->dd, |
| 469 | "%s: RX_AMP_APPLY is set to disabled\n", |
| 470 | __func__); |
| 471 | return; |
| 472 | } |
| 473 | |
| 474 | get_platform_config_field(ppd->dd, |
| 475 | PLATFORM_CONFIG_RX_PRESET_TABLE, |
| 476 | rx_preset_index, |
| 477 | RX_PRESET_TABLE_QSFP_RX_AMP_APPLY, |
| 478 | &rx_preset, 4); |
| 479 | |
| 480 | if (!rx_preset) { |
| 481 | dd_dev_info(ppd->dd, |
| 482 | "%s: RX_AMP_APPLY is set to disabled\n", |
| 483 | __func__); |
| 484 | return; |
| 485 | } |
| 486 | get_platform_config_field(ppd->dd, |
| 487 | PLATFORM_CONFIG_RX_PRESET_TABLE, |
| 488 | rx_preset_index, |
| 489 | RX_PRESET_TABLE_QSFP_RX_AMP, |
| 490 | &rx_preset, 4); |
| 491 | |
| 492 | dd_dev_info(ppd->dd, |
| 493 | "%s: Requested RX AMP %x\n", |
| 494 | __func__, |
| 495 | rx_preset); |
| 496 | |
| 497 | for (i = 0; i < 4; i++) { |
| 498 | if (cache[(128 * 3) + 225] & (1 << i)) { |
| 499 | preferred = i; |
| 500 | if (preferred == rx_preset) |
| 501 | break; |
| 502 | } |
| 503 | } |
| 504 | |
| 505 | /* |
| 506 | * Verify that preferred RX amplitude is not just a |
| 507 | * fall through of the default |
| 508 | */ |
| 509 | if (!preferred && !(cache[(128 * 3) + 225] & 0x1)) { |
| 510 | dd_dev_info(ppd->dd, "No supported RX AMP, not applying\n"); |
| 511 | return; |
| 512 | } |
| 513 | |
| 514 | dd_dev_info(ppd->dd, |
| 515 | "%s: Applying RX AMP %x\n", __func__, preferred); |
| 516 | |
| 517 | rx_amp = preferred | (preferred << 4); |
| 518 | qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 238, &rx_amp, 1); |
| 519 | qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 239, &rx_amp, 1); |
| 520 | } |
| 521 | |
| 522 | #define OPA_INVALID_INDEX 0xFFF |
| 523 | |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 524 | static void apply_tx_lanes(struct hfi1_pportdata *ppd, u8 field_id, |
| 525 | u32 config_data, const char *message) |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 526 | { |
| 527 | u8 i; |
| 528 | int ret = HCMD_SUCCESS; |
| 529 | |
| 530 | for (i = 0; i < 4; i++) { |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 531 | ret = load_8051_config(ppd->dd, field_id, i, config_data); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 532 | if (ret != HCMD_SUCCESS) { |
| 533 | dd_dev_err( |
| 534 | ppd->dd, |
| 535 | "%s: %s for lane %u failed\n", |
| 536 | message, __func__, i); |
| 537 | } |
| 538 | } |
| 539 | } |
| 540 | |
| 541 | static void apply_tunings( |
| 542 | struct hfi1_pportdata *ppd, u32 tx_preset_index, |
| 543 | u8 tuning_method, u32 total_atten, u8 limiting_active) |
| 544 | { |
| 545 | int ret = 0; |
| 546 | u32 config_data = 0, tx_preset = 0; |
| 547 | u8 precur = 0, attn = 0, postcur = 0, external_device_config = 0; |
| 548 | u8 *cache = ppd->qsfp_info.cache; |
| 549 | |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 550 | /* Pass tuning method to 8051 */ |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 551 | read_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG, |
| 552 | &config_data); |
Dean Luick | f6de3d3 | 2016-05-24 12:51:00 -0700 | [diff] [blame] | 553 | config_data &= ~(0xff << TUNING_METHOD_SHIFT); |
| 554 | config_data |= ((u32)tuning_method << TUNING_METHOD_SHIFT); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 555 | ret = load_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG, |
| 556 | config_data); |
| 557 | if (ret != HCMD_SUCCESS) |
| 558 | dd_dev_err(ppd->dd, "%s: Failed to set tuning method\n", |
| 559 | __func__); |
| 560 | |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 561 | /* Set same channel loss for both TX and RX */ |
| 562 | config_data = 0 | (total_atten << 16) | (total_atten << 24); |
| 563 | apply_tx_lanes(ppd, CHANNEL_LOSS_SETTINGS, config_data, |
| 564 | "Setting channel loss"); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 565 | |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 566 | /* Inform 8051 of cable capabilities */ |
| 567 | if (ppd->qsfp_info.cache_valid) { |
| 568 | external_device_config = |
| 569 | ((cache[QSFP_MOD_PWR_OFFS] & 0x4) << 3) | |
| 570 | ((cache[QSFP_MOD_PWR_OFFS] & 0x8) << 2) | |
| 571 | ((cache[QSFP_EQ_INFO_OFFS] & 0x2) << 1) | |
| 572 | (cache[QSFP_EQ_INFO_OFFS] & 0x4); |
| 573 | ret = read_8051_config(ppd->dd, DC_HOST_COMM_SETTINGS, |
| 574 | GENERAL_CONFIG, &config_data); |
| 575 | /* Clear, then set the external device config field */ |
Easwar Hariharan | 27a340f | 2016-05-12 10:22:45 -0700 | [diff] [blame] | 576 | config_data &= ~(u32)0xFF; |
| 577 | config_data |= external_device_config; |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 578 | ret = load_8051_config(ppd->dd, DC_HOST_COMM_SETTINGS, |
| 579 | GENERAL_CONFIG, config_data); |
| 580 | if (ret != HCMD_SUCCESS) |
| 581 | dd_dev_info(ppd->dd, |
| 582 | "%s: Failed set ext device config params\n", |
| 583 | __func__); |
| 584 | } |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 585 | |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 586 | if (tx_preset_index == OPA_INVALID_INDEX) { |
| 587 | if (ppd->port_type == PORT_TYPE_QSFP && limiting_active) |
| 588 | dd_dev_info(ppd->dd, "%s: Invalid Tx preset index\n", |
| 589 | __func__); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 590 | return; |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 591 | } |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 592 | |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 593 | /* Following for limiting active channels only */ |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 594 | get_platform_config_field( |
| 595 | ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, tx_preset_index, |
| 596 | TX_PRESET_TABLE_PRECUR, &tx_preset, 4); |
| 597 | precur = tx_preset; |
| 598 | |
| 599 | get_platform_config_field( |
| 600 | ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, |
| 601 | tx_preset_index, TX_PRESET_TABLE_ATTN, &tx_preset, 4); |
| 602 | attn = tx_preset; |
| 603 | |
| 604 | get_platform_config_field( |
| 605 | ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, |
| 606 | tx_preset_index, TX_PRESET_TABLE_POSTCUR, &tx_preset, 4); |
| 607 | postcur = tx_preset; |
| 608 | |
| 609 | config_data = precur | (attn << 8) | (postcur << 16); |
| 610 | |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 611 | apply_tx_lanes(ppd, TX_EQ_SETTINGS, config_data, |
| 612 | "Applying TX settings"); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 613 | } |
| 614 | |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 615 | /* Must be holding the QSFP i2c resource */ |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 616 | static int tune_active_qsfp(struct hfi1_pportdata *ppd, u32 *ptr_tx_preset, |
| 617 | u32 *ptr_rx_preset, u32 *ptr_total_atten) |
| 618 | { |
Dean Luick | 765a6fa | 2016-03-05 08:50:06 -0800 | [diff] [blame] | 619 | int ret; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 620 | u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled; |
| 621 | u8 *cache = ppd->qsfp_info.cache; |
| 622 | |
| 623 | ppd->qsfp_info.limiting_active = 1; |
| 624 | |
| 625 | ret = set_qsfp_tx(ppd, 0); |
| 626 | if (ret) |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 627 | return ret; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 628 | |
| 629 | ret = qual_power(ppd); |
| 630 | if (ret) |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 631 | return ret; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 632 | |
| 633 | ret = qual_bitrate(ppd); |
| 634 | if (ret) |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 635 | return ret; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 636 | |
Easwar Hariharan | b5e7101 | 2016-07-25 13:40:03 -0700 | [diff] [blame] | 637 | /* |
| 638 | * We'll change the QSFP memory contents from here on out, thus we set a |
| 639 | * flag here to remind ourselves to reset the QSFP module. This prevents |
| 640 | * reuse of stale settings established in our previous pass through. |
| 641 | */ |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 642 | if (ppd->qsfp_info.reset_needed) { |
| 643 | reset_qsfp(ppd); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 644 | refresh_qsfp_cache(ppd, &ppd->qsfp_info); |
| 645 | } else { |
| 646 | ppd->qsfp_info.reset_needed = 1; |
| 647 | } |
| 648 | |
| 649 | ret = set_qsfp_high_power(ppd); |
| 650 | if (ret) |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 651 | return ret; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 652 | |
| 653 | if (cache[QSFP_EQ_INFO_OFFS] & 0x4) { |
| 654 | ret = get_platform_config_field( |
| 655 | ppd->dd, |
| 656 | PLATFORM_CONFIG_PORT_TABLE, 0, |
| 657 | PORT_TABLE_TX_PRESET_IDX_ACTIVE_EQ, |
| 658 | ptr_tx_preset, 4); |
| 659 | if (ret) { |
| 660 | *ptr_tx_preset = OPA_INVALID_INDEX; |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 661 | return ret; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 662 | } |
| 663 | } else { |
| 664 | ret = get_platform_config_field( |
| 665 | ppd->dd, |
| 666 | PLATFORM_CONFIG_PORT_TABLE, 0, |
| 667 | PORT_TABLE_TX_PRESET_IDX_ACTIVE_NO_EQ, |
| 668 | ptr_tx_preset, 4); |
| 669 | if (ret) { |
| 670 | *ptr_tx_preset = OPA_INVALID_INDEX; |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 671 | return ret; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 672 | } |
| 673 | } |
| 674 | |
| 675 | ret = get_platform_config_field( |
| 676 | ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| 677 | PORT_TABLE_RX_PRESET_IDX, ptr_rx_preset, 4); |
| 678 | if (ret) { |
| 679 | *ptr_rx_preset = OPA_INVALID_INDEX; |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 680 | return ret; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 681 | } |
| 682 | |
| 683 | if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G)) |
| 684 | get_platform_config_field( |
| 685 | ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| 686 | PORT_TABLE_LOCAL_ATTEN_25G, ptr_total_atten, 4); |
| 687 | else if ((lss & OPA_LINK_SPEED_12_5G) && (lse & OPA_LINK_SPEED_12_5G)) |
| 688 | get_platform_config_field( |
| 689 | ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| 690 | PORT_TABLE_LOCAL_ATTEN_12G, ptr_total_atten, 4); |
| 691 | |
| 692 | apply_cdr_settings(ppd, *ptr_rx_preset, *ptr_tx_preset); |
| 693 | |
| 694 | apply_eq_settings(ppd, *ptr_rx_preset, *ptr_tx_preset); |
| 695 | |
| 696 | apply_rx_amplitude_settings(ppd, *ptr_rx_preset, *ptr_tx_preset); |
| 697 | |
| 698 | ret = set_qsfp_tx(ppd, 1); |
Dean Luick | 765a6fa | 2016-03-05 08:50:06 -0800 | [diff] [blame] | 699 | |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 700 | return ret; |
| 701 | } |
| 702 | |
| 703 | static int tune_qsfp(struct hfi1_pportdata *ppd, |
| 704 | u32 *ptr_tx_preset, u32 *ptr_rx_preset, |
| 705 | u8 *ptr_tuning_method, u32 *ptr_total_atten) |
| 706 | { |
| 707 | u32 cable_atten = 0, remote_atten = 0, platform_atten = 0; |
| 708 | u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled; |
| 709 | int ret = 0; |
| 710 | u8 *cache = ppd->qsfp_info.cache; |
| 711 | |
| 712 | switch ((cache[QSFP_MOD_TECH_OFFS] & 0xF0) >> 4) { |
| 713 | case 0xA ... 0xB: |
| 714 | ret = get_platform_config_field( |
| 715 | ppd->dd, |
| 716 | PLATFORM_CONFIG_PORT_TABLE, 0, |
| 717 | PORT_TABLE_LOCAL_ATTEN_25G, |
| 718 | &platform_atten, 4); |
| 719 | if (ret) |
| 720 | return ret; |
| 721 | |
| 722 | if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G)) |
| 723 | cable_atten = cache[QSFP_CU_ATTEN_12G_OFFS]; |
| 724 | else if ((lss & OPA_LINK_SPEED_12_5G) && |
| 725 | (lse & OPA_LINK_SPEED_12_5G)) |
| 726 | cable_atten = cache[QSFP_CU_ATTEN_7G_OFFS]; |
| 727 | |
| 728 | /* Fallback to configured attenuation if cable memory is bad */ |
| 729 | if (cable_atten == 0 || cable_atten > 36) { |
| 730 | ret = get_platform_config_field( |
| 731 | ppd->dd, |
| 732 | PLATFORM_CONFIG_SYSTEM_TABLE, 0, |
| 733 | SYSTEM_TABLE_QSFP_ATTENUATION_DEFAULT_25G, |
| 734 | &cable_atten, 4); |
| 735 | if (ret) |
| 736 | return ret; |
| 737 | } |
| 738 | |
| 739 | ret = get_platform_config_field( |
| 740 | ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| 741 | PORT_TABLE_REMOTE_ATTEN_25G, &remote_atten, 4); |
| 742 | if (ret) |
| 743 | return ret; |
| 744 | |
| 745 | *ptr_total_atten = platform_atten + cable_atten + remote_atten; |
| 746 | |
| 747 | *ptr_tuning_method = OPA_PASSIVE_TUNING; |
| 748 | break; |
| 749 | case 0x0 ... 0x9: /* fallthrough */ |
| 750 | case 0xC: /* fallthrough */ |
| 751 | case 0xE: |
| 752 | ret = tune_active_qsfp(ppd, ptr_tx_preset, ptr_rx_preset, |
| 753 | ptr_total_atten); |
| 754 | if (ret) |
| 755 | return ret; |
| 756 | |
| 757 | *ptr_tuning_method = OPA_ACTIVE_TUNING; |
| 758 | break; |
| 759 | case 0xD: /* fallthrough */ |
| 760 | case 0xF: |
| 761 | default: |
| 762 | dd_dev_info(ppd->dd, "%s: Unknown/unsupported cable\n", |
| 763 | __func__); |
| 764 | break; |
| 765 | } |
| 766 | return ret; |
| 767 | } |
| 768 | |
| 769 | /* |
| 770 | * This function communicates its success or failure via ppd->driver_link_ready |
| 771 | * Thus, it depends on its association with start_link(...) which checks |
| 772 | * driver_link_ready before proceeding with the link negotiation and |
| 773 | * initialization process. |
| 774 | */ |
| 775 | void tune_serdes(struct hfi1_pportdata *ppd) |
| 776 | { |
| 777 | int ret = 0; |
| 778 | u32 total_atten = 0; |
| 779 | u32 remote_atten = 0, platform_atten = 0; |
| 780 | u32 rx_preset_index, tx_preset_index; |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 781 | u8 tuning_method = 0, limiting_active = 0; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 782 | struct hfi1_devdata *dd = ppd->dd; |
| 783 | |
| 784 | rx_preset_index = OPA_INVALID_INDEX; |
| 785 | tx_preset_index = OPA_INVALID_INDEX; |
| 786 | |
| 787 | /* the link defaults to enabled */ |
| 788 | ppd->link_enabled = 1; |
| 789 | /* the driver link ready state defaults to not ready */ |
| 790 | ppd->driver_link_ready = 0; |
| 791 | ppd->offline_disabled_reason = HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE); |
| 792 | |
Easwar Hariharan | 715c430 | 2016-02-03 14:32:14 -0800 | [diff] [blame] | 793 | /* Skip the tuning for testing (loopback != none) and simulations */ |
| 794 | if (loopback != LOOPBACK_NONE || |
Easwar Hariharan | c3838b3 | 2016-02-09 14:29:13 -0800 | [diff] [blame] | 795 | ppd->dd->icode == ICODE_FUNCTIONAL_SIMULATOR) { |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 796 | ppd->driver_link_ready = 1; |
| 797 | return; |
| 798 | } |
| 799 | |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 800 | switch (ppd->port_type) { |
| 801 | case PORT_TYPE_DISCONNECTED: |
| 802 | ppd->offline_disabled_reason = |
| 803 | HFI1_ODR_MASK(OPA_LINKDOWN_REASON_DISCONNECTED); |
| 804 | dd_dev_info(dd, "%s: Port disconnected, disabling port\n", |
| 805 | __func__); |
| 806 | goto bail; |
| 807 | case PORT_TYPE_FIXED: |
| 808 | /* platform_atten, remote_atten pre-zeroed to catch error */ |
| 809 | get_platform_config_field( |
| 810 | ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| 811 | PORT_TABLE_LOCAL_ATTEN_25G, &platform_atten, 4); |
| 812 | |
| 813 | get_platform_config_field( |
| 814 | ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| 815 | PORT_TABLE_REMOTE_ATTEN_25G, &remote_atten, 4); |
| 816 | |
| 817 | total_atten = platform_atten + remote_atten; |
| 818 | |
| 819 | tuning_method = OPA_PASSIVE_TUNING; |
| 820 | break; |
| 821 | case PORT_TYPE_VARIABLE: |
| 822 | if (qsfp_mod_present(ppd)) { |
| 823 | /* |
| 824 | * platform_atten, remote_atten pre-zeroed to |
| 825 | * catch error |
| 826 | */ |
| 827 | get_platform_config_field( |
| 828 | ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| 829 | PORT_TABLE_LOCAL_ATTEN_25G, |
| 830 | &platform_atten, 4); |
| 831 | |
| 832 | get_platform_config_field( |
| 833 | ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, |
| 834 | PORT_TABLE_REMOTE_ATTEN_25G, |
| 835 | &remote_atten, 4); |
| 836 | |
| 837 | total_atten = platform_atten + remote_atten; |
| 838 | |
| 839 | tuning_method = OPA_PASSIVE_TUNING; |
Easwar Hariharan | 623bba2 | 2016-04-12 11:25:57 -0700 | [diff] [blame] | 840 | } else { |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 841 | ppd->offline_disabled_reason = |
| 842 | HFI1_ODR_MASK(OPA_LINKDOWN_REASON_CHASSIS_CONFIG); |
Easwar Hariharan | 623bba2 | 2016-04-12 11:25:57 -0700 | [diff] [blame] | 843 | goto bail; |
| 844 | } |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 845 | break; |
| 846 | case PORT_TYPE_QSFP: |
| 847 | if (qsfp_mod_present(ppd)) { |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 848 | ret = acquire_chip_resource(ppd->dd, |
| 849 | qsfp_resource(ppd->dd), |
| 850 | QSFP_WAIT); |
| 851 | if (ret) { |
| 852 | dd_dev_err(ppd->dd, "%s: hfi%d: cannot lock i2c chain\n", |
| 853 | __func__, (int)ppd->dd->hfi1_id); |
| 854 | goto bail; |
| 855 | } |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 856 | refresh_qsfp_cache(ppd, &ppd->qsfp_info); |
| 857 | |
| 858 | if (ppd->qsfp_info.cache_valid) { |
| 859 | ret = tune_qsfp(ppd, |
| 860 | &tx_preset_index, |
| 861 | &rx_preset_index, |
| 862 | &tuning_method, |
| 863 | &total_atten); |
Easwar Hariharan | c3838b3 | 2016-02-09 14:29:13 -0800 | [diff] [blame] | 864 | |
| 865 | /* |
| 866 | * We may have modified the QSFP memory, so |
| 867 | * update the cache to reflect the changes |
| 868 | */ |
| 869 | refresh_qsfp_cache(ppd, &ppd->qsfp_info); |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 870 | limiting_active = |
| 871 | ppd->qsfp_info.limiting_active; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 872 | } else { |
| 873 | dd_dev_err(dd, |
| 874 | "%s: Reading QSFP memory failed\n", |
| 875 | __func__); |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 876 | ret = -EINVAL; /* a fail indication */ |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 877 | } |
Dean Luick | e4e0e39 | 2016-04-12 11:28:36 -0700 | [diff] [blame] | 878 | release_chip_resource(ppd->dd, qsfp_resource(ppd->dd)); |
| 879 | if (ret) |
| 880 | goto bail; |
Easwar Hariharan | 623bba2 | 2016-04-12 11:25:57 -0700 | [diff] [blame] | 881 | } else { |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 882 | ppd->offline_disabled_reason = |
| 883 | HFI1_ODR_MASK( |
Easwar Hariharan | e1bf0d5 | 2016-02-03 14:36:58 -0800 | [diff] [blame] | 884 | OPA_LINKDOWN_REASON_LOCAL_MEDIA_NOT_INSTALLED); |
Easwar Hariharan | 623bba2 | 2016-04-12 11:25:57 -0700 | [diff] [blame] | 885 | goto bail; |
| 886 | } |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 887 | break; |
| 888 | default: |
| 889 | dd_dev_info(ppd->dd, "%s: Unknown port type\n", __func__); |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 890 | ppd->port_type = PORT_TYPE_UNKNOWN; |
| 891 | tuning_method = OPA_UNKNOWN_TUNING; |
| 892 | total_atten = 0; |
| 893 | limiting_active = 0; |
| 894 | tx_preset_index = OPA_INVALID_INDEX; |
| 895 | break; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 896 | } |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 897 | |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 898 | if (ppd->offline_disabled_reason == |
| 899 | HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE)) |
| 900 | apply_tunings(ppd, tx_preset_index, tuning_method, |
Easwar Hariharan | 97167e8 | 2016-02-09 14:29:22 -0800 | [diff] [blame] | 901 | total_atten, limiting_active); |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 902 | |
Easwar Hariharan | c3838b3 | 2016-02-09 14:29:13 -0800 | [diff] [blame] | 903 | if (!ret) |
| 904 | ppd->driver_link_ready = 1; |
Easwar Hariharan | 8ebd4cf | 2016-02-03 14:31:14 -0800 | [diff] [blame] | 905 | |
| 906 | return; |
| 907 | bail: |
| 908 | ppd->driver_link_ready = 0; |
| 909 | } |