David S. Miller | 4621bf1 | 2008-11-28 16:40:26 -0800 | [diff] [blame] | 1 | /* |
| 2 | * drivers/net/phy/national.c |
| 3 | * |
| 4 | * Driver for National Semiconductor PHYs |
| 5 | * |
| 6 | * Author: Stuart Menefy <stuart.menefy@st.com> |
| 7 | * Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com> |
| 8 | * |
| 9 | * Copyright (c) 2008 STMicroelectronics Limited |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or modify it |
| 12 | * under the terms of the GNU General Public License as published by the |
| 13 | * Free Software Foundation; either version 2 of the License, or (at your |
| 14 | * option) any later version. |
| 15 | * |
| 16 | */ |
| 17 | |
| 18 | #include <linux/kernel.h> |
| 19 | #include <linux/module.h> |
| 20 | #include <linux/mii.h> |
| 21 | #include <linux/ethtool.h> |
| 22 | #include <linux/phy.h> |
| 23 | #include <linux/netdevice.h> |
| 24 | |
| 25 | /* DP83865 phy identifier values */ |
| 26 | #define DP83865_PHY_ID 0x20005c7a |
| 27 | |
| 28 | #define DP83865_INT_MASK_REG 0x15 |
| 29 | #define DP83865_INT_MASK_STATUS 0x14 |
| 30 | |
| 31 | #define DP83865_INT_REMOTE_FAULT 0x0008 |
| 32 | #define DP83865_INT_ANE_COMPLETED 0x0010 |
| 33 | #define DP83865_INT_LINK_CHANGE 0xe000 |
| 34 | #define DP83865_INT_MASK_DEFAULT (DP83865_INT_REMOTE_FAULT | \ |
| 35 | DP83865_INT_ANE_COMPLETED | \ |
| 36 | DP83865_INT_LINK_CHANGE) |
| 37 | |
| 38 | /* Advanced proprietary configuration */ |
| 39 | #define NS_EXP_MEM_CTL 0x16 |
| 40 | #define NS_EXP_MEM_DATA 0x1d |
| 41 | #define NS_EXP_MEM_ADD 0x1e |
| 42 | |
| 43 | #define LED_CTRL_REG 0x13 |
| 44 | #define AN_FALLBACK_AN 0x0001 |
| 45 | #define AN_FALLBACK_CRC 0x0002 |
| 46 | #define AN_FALLBACK_IE 0x0004 |
| 47 | #define ALL_FALLBACK_ON (AN_FALLBACK_AN | AN_FALLBACK_CRC | AN_FALLBACK_IE) |
| 48 | |
| 49 | enum hdx_loopback { |
| 50 | hdx_loopback_on = 0, |
| 51 | hdx_loopback_off = 1, |
| 52 | }; |
| 53 | |
| 54 | static u8 ns_exp_read(struct phy_device *phydev, u16 reg) |
| 55 | { |
| 56 | phy_write(phydev, NS_EXP_MEM_ADD, reg); |
| 57 | return phy_read(phydev, NS_EXP_MEM_DATA); |
| 58 | } |
| 59 | |
| 60 | static void ns_exp_write(struct phy_device *phydev, u16 reg, u8 data) |
| 61 | { |
| 62 | phy_write(phydev, NS_EXP_MEM_ADD, reg); |
| 63 | phy_write(phydev, NS_EXP_MEM_DATA, data); |
| 64 | } |
| 65 | |
| 66 | static int ns_config_intr(struct phy_device *phydev) |
| 67 | { |
| 68 | int err; |
| 69 | |
| 70 | if (phydev->interrupts == PHY_INTERRUPT_ENABLED) |
| 71 | err = phy_write(phydev, DP83865_INT_MASK_REG, |
| 72 | DP83865_INT_MASK_DEFAULT); |
| 73 | else |
| 74 | err = phy_write(phydev, DP83865_INT_MASK_REG, 0); |
| 75 | |
| 76 | return err; |
| 77 | } |
| 78 | |
| 79 | static int ns_ack_interrupt(struct phy_device *phydev) |
| 80 | { |
| 81 | int ret = phy_read(phydev, DP83865_INT_MASK_STATUS); |
| 82 | if (ret < 0) |
| 83 | return ret; |
| 84 | |
| 85 | return 0; |
| 86 | } |
| 87 | |
| 88 | static void ns_giga_speed_fallback(struct phy_device *phydev, int mode) |
| 89 | { |
| 90 | int bmcr = phy_read(phydev, MII_BMCR); |
| 91 | |
| 92 | phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN)); |
| 93 | |
| 94 | /* Enable 8 bit expended memory read/write (no auto increment) */ |
| 95 | phy_write(phydev, NS_EXP_MEM_CTL, 0); |
| 96 | phy_write(phydev, NS_EXP_MEM_ADD, 0x1C0); |
| 97 | phy_write(phydev, NS_EXP_MEM_DATA, 0x0008); |
| 98 | phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN)); |
| 99 | phy_write(phydev, LED_CTRL_REG, mode); |
David S. Miller | 4621bf1 | 2008-11-28 16:40:26 -0800 | [diff] [blame] | 100 | } |
| 101 | |
| 102 | static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable) |
| 103 | { |
| 104 | if (disable) |
| 105 | ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1); |
| 106 | else |
| 107 | ns_exp_write(phydev, 0x1c0, |
| 108 | ns_exp_read(phydev, 0x1c0) & 0xfffe); |
| 109 | |
| 110 | printk(KERN_DEBUG "DP83865 PHY: 10BASE-T HDX loopback %s\n", |
| 111 | (ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on"); |
David S. Miller | 4621bf1 | 2008-11-28 16:40:26 -0800 | [diff] [blame] | 112 | } |
| 113 | |
| 114 | static int ns_config_init(struct phy_device *phydev) |
| 115 | { |
| 116 | ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON); |
| 117 | /* In the latest MAC or switches design, the 10 Mbps loopback |
| 118 | is desired to be turned off. */ |
| 119 | ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off); |
| 120 | return ns_ack_interrupt(phydev); |
| 121 | } |
| 122 | |
| 123 | static struct phy_driver dp83865_driver = { |
| 124 | .phy_id = DP83865_PHY_ID, |
| 125 | .phy_id_mask = 0xfffffff0, |
| 126 | .name = "NatSemi DP83865", |
| 127 | .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, |
| 128 | .flags = PHY_HAS_INTERRUPT, |
| 129 | .config_init = ns_config_init, |
| 130 | .config_aneg = genphy_config_aneg, |
| 131 | .read_status = genphy_read_status, |
| 132 | .ack_interrupt = ns_ack_interrupt, |
| 133 | .config_intr = ns_config_intr, |
| 134 | .driver = {.owner = THIS_MODULE,} |
| 135 | }; |
| 136 | |
| 137 | static int __init ns_init(void) |
| 138 | { |
| 139 | return phy_driver_register(&dp83865_driver); |
| 140 | } |
| 141 | |
| 142 | static void __exit ns_exit(void) |
| 143 | { |
| 144 | phy_driver_unregister(&dp83865_driver); |
| 145 | } |
| 146 | |
| 147 | MODULE_DESCRIPTION("NatSemi PHY driver"); |
| 148 | MODULE_AUTHOR("Stuart Menefy"); |
| 149 | MODULE_LICENSE("GPL"); |
| 150 | |
| 151 | module_init(ns_init); |
| 152 | module_exit(ns_exit); |
David Woodhouse | 4e4f10f | 2010-04-02 01:05:56 +0000 | [diff] [blame] | 153 | |
Uwe Kleine-König | cf93c94 | 2010-10-03 23:43:32 +0000 | [diff] [blame] | 154 | static struct mdio_device_id __maybe_unused ns_tbl[] = { |
David Woodhouse | 4e4f10f | 2010-04-02 01:05:56 +0000 | [diff] [blame] | 155 | { DP83865_PHY_ID, 0xfffffff0 }, |
| 156 | { } |
| 157 | }; |
| 158 | |
| 159 | MODULE_DEVICE_TABLE(mdio, ns_tbl); |