Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 5f5d585167dadce1c895a860ae0be0dc6f48ee82 / . / arch / arm / mach-msm / proc_comm.h
blob: 235076533c03d3d4ccade73ac01f106e2098c72c [file] [log] [blame]
Brian Swetlandb8a16e12008-09-09 09:36:50 -0700[diff] [blame]1/* arch/arm/mach-msm/proc_comm.h
2 *
3 * Copyright (c) 2007 QUALCOMM Incorporated
4 *
5 * This software is licensed under the terms of the GNU General Public
6 * License version 2, as published by the Free Software Foundation, and
7 * may be copied, distributed, and modified under those terms.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 */
15
16#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_
17#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_
18
19enum {
20 PCOM_CMD_IDLE = 0x0,
21 PCOM_CMD_DONE,
22 PCOM_RESET_APPS,
23 PCOM_RESET_CHIP,
24 PCOM_CONFIG_NAND_MPU,
25 PCOM_CONFIG_USB_CLKS,
26 PCOM_GET_POWER_ON_STATUS,
27 PCOM_GET_WAKE_UP_STATUS,
28 PCOM_GET_BATT_LEVEL,
29 PCOM_CHG_IS_CHARGING,
30 PCOM_POWER_DOWN,
31 PCOM_USB_PIN_CONFIG,
32 PCOM_USB_PIN_SEL,
33 PCOM_SET_RTC_ALARM,
34 PCOM_NV_READ,
35 PCOM_NV_WRITE,
36 PCOM_GET_UUID_HIGH,
37 PCOM_GET_UUID_LOW,
38 PCOM_GET_HW_ENTROPY,
39 PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE,
40 PCOM_CLKCTL_RPC_ENABLE,
41 PCOM_CLKCTL_RPC_DISABLE,
42 PCOM_CLKCTL_RPC_RESET,
43 PCOM_CLKCTL_RPC_SET_FLAGS,
44 PCOM_CLKCTL_RPC_SET_RATE,
45 PCOM_CLKCTL_RPC_MIN_RATE,
46 PCOM_CLKCTL_RPC_MAX_RATE,
47 PCOM_CLKCTL_RPC_RATE,
48 PCOM_CLKCTL_RPC_PLL_REQUEST,
49 PCOM_CLKCTL_RPC_ENABLED,
50 PCOM_VREG_SWITCH,
51 PCOM_VREG_SET_LEVEL,
52 PCOM_GPIO_TLMM_CONFIG_GROUP,
53 PCOM_GPIO_TLMM_UNCONFIG_GROUP,
54 PCOM_NV_WRITE_BYTES_4_7,
55 PCOM_CONFIG_DISP,
56 PCOM_GET_FTM_BOOT_COUNT,
57 PCOM_RPC_GPIO_TLMM_CONFIG_EX,
58 PCOM_PM_MPP_CONFIG,
59 PCOM_GPIO_IN,
60 PCOM_GPIO_OUT,
61 PCOM_RESET_MODEM,
62 PCOM_RESET_CHIP_IMM,
63 PCOM_PM_VID_EN,
64 PCOM_VREG_PULLDOWN,
Dima Zavin5f5d5852009-09-08 20:15:37 -0700[diff] [blame^]65 PCOM_GET_MODEM_VERSION,
66 PCOM_CLK_REGIME_SEC_RESET,
67 PCOM_CLK_REGIME_SEC_RESET_ASSERT,
68 PCOM_CLK_REGIME_SEC_RESET_DEASSERT,
69 PCOM_CLK_REGIME_SEC_PLL_REQUEST_WRP,
70 PCOM_CLK_REGIME_SEC_ENABLE,
71 PCOM_CLK_REGIME_SEC_DISABLE,
72 PCOM_CLK_REGIME_SEC_IS_ON,
73 PCOM_CLK_REGIME_SEC_SEL_CLK_INV,
74 PCOM_CLK_REGIME_SEC_SEL_CLK_SRC,
75 PCOM_CLK_REGIME_SEC_SEL_CLK_DIV,
76 PCOM_CLK_REGIME_SEC_ICODEC_CLK_ENABLE,
77 PCOM_CLK_REGIME_SEC_ICODEC_CLK_DISABLE,
78 PCOM_CLK_REGIME_SEC_SEL_SPEED,
79 PCOM_CLK_REGIME_SEC_CONFIG_GP_CLK_WRP,
80 PCOM_CLK_REGIME_SEC_CONFIG_MDH_CLK_WRP,
81 PCOM_CLK_REGIME_SEC_USB_XTAL_ON,
82 PCOM_CLK_REGIME_SEC_USB_XTAL_OFF,
83 PCOM_CLK_REGIME_SEC_SET_QDSP_DME_MODE,
84 PCOM_CLK_REGIME_SEC_SWITCH_ADSP_CLK,
85 PCOM_CLK_REGIME_SEC_GET_MAX_ADSP_CLK_KHZ,
86 PCOM_CLK_REGIME_SEC_GET_I2C_CLK_KHZ,
87 PCOM_CLK_REGIME_SEC_MSM_GET_CLK_FREQ_KHZ,
88 PCOM_CLK_REGIME_SEC_SEL_VFE_SRC,
89 PCOM_CLK_REGIME_SEC_MSM_SEL_CAMCLK,
90 PCOM_CLK_REGIME_SEC_MSM_SEL_LCDCLK,
91 PCOM_CLK_REGIME_SEC_VFE_RAIL_OFF,
92 PCOM_CLK_REGIME_SEC_VFE_RAIL_ON,
93 PCOM_CLK_REGIME_SEC_GRP_RAIL_OFF,
94 PCOM_CLK_REGIME_SEC_GRP_RAIL_ON,
95 PCOM_CLK_REGIME_SEC_VDC_RAIL_OFF,
96 PCOM_CLK_REGIME_SEC_VDC_RAIL_ON,
97 PCOM_CLK_REGIME_SEC_LCD_CTRL,
98 PCOM_CLK_REGIME_SEC_REGISTER_FOR_CPU_RESOURCE,
99 PCOM_CLK_REGIME_SEC_DEREGISTER_FOR_CPU_RESOURCE,
100 PCOM_CLK_REGIME_SEC_RESOURCE_REQUEST_WRP,
101 PCOM_CLK_REGIME_MSM_SEC_SEL_CLK_OWNER,
102 PCOM_CLK_REGIME_SEC_DEVMAN_REQUEST_WRP,
103 PCOM_GPIO_CONFIG,
104 PCOM_GPIO_CONFIGURE_GROUP,
105 PCOM_GPIO_TLMM_SET_PORT,
106 PCOM_GPIO_TLMM_CONFIG_EX,
107 PCOM_SET_FTM_BOOT_COUNT,
108 PCOM_RESERVED0,
109 PCOM_RESERVED1,
110 PCOM_CUSTOMER_CMD1,
111 PCOM_CUSTOMER_CMD2,
112 PCOM_CUSTOMER_CMD3,
113 PCOM_CLK_REGIME_ENTER_APPSBL_CHG_MODE,
114 PCOM_CLK_REGIME_EXIT_APPSBL_CHG_MODE,
115 PCOM_CLK_REGIME_SEC_RAIL_DISABLE,
116 PCOM_CLK_REGIME_SEC_RAIL_ENABLE,
117 PCOM_CLK_REGIME_SEC_RAIL_CONTROL,
118 PCOM_SET_SW_WATCHDOG_STATE,
119 PCOM_PM_MPP_CONFIG_DIGITAL_INPUT,
120 PCOM_PM_MPP_CONFIG_I_SINK,
121 PCOM_RESERVED_101,
122 PCOM_MSM_HSUSB_PHY_RESET,
123 PCOM_GET_BATT_MV_LEVEL,
124 PCOM_CHG_USB_IS_PC_CONNECTED,
125 PCOM_CHG_USB_IS_CHARGER_CONNECTED,
126 PCOM_CHG_USB_IS_DISCONNECTED,
127 PCOM_CHG_USB_IS_AVAILABLE,
128 PCOM_CLK_REGIME_SEC_MSM_SEL_FREQ,
129 PCOM_CLK_REGIME_SEC_SET_PCLK_AXI_POLICY,
130 PCOM_CLKCTL_RPC_RESET_ASSERT,
131 PCOM_CLKCTL_RPC_RESET_DEASSERT,
132 PCOM_CLKCTL_RPC_RAIL_ON,
133 PCOM_CLKCTL_RPC_RAIL_OFF,
134 PCOM_CLKCTL_RPC_RAIL_ENABLE,
135 PCOM_CLKCTL_RPC_RAIL_DISABLE,
136 PCOM_CLKCTL_RPC_RAIL_CONTROL,
137 PCOM_CLKCTL_RPC_MIN_MSMC1,
Brian Swetlandb8a16e12008-09-09 09:36:50 -0700[diff] [blame]138 PCOM_NUM_CMDS,
139};
140
141enum {
Dima Zavin5f5d5852009-09-08 20:15:37 -0700[diff] [blame^]142 PCOM_INVALID_STATUS = 0x0,
143 PCOM_READY,
144 PCOM_CMD_RUNNING,
145 PCOM_CMD_SUCCESS,
146 PCOM_CMD_FAIL,
147 PCOM_CMD_FAIL_FALSE_RETURNED,
148 PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_SERVER,
149 PCOM_CMD_FAIL_CMD_OUT_OF_BOUNDS_CLIENT,
150 PCOM_CMD_FAIL_CMD_UNREGISTERED,
151 PCOM_CMD_FAIL_CMD_LOCKED,
152 PCOM_CMD_FAIL_SERVER_NOT_YET_READY,
153 PCOM_CMD_FAIL_BAD_DESTINATION,
154 PCOM_CMD_FAIL_SERVER_RESET,
155 PCOM_CMD_FAIL_SMSM_NOT_INIT,
156 PCOM_CMD_FAIL_PROC_COMM_BUSY,
157 PCOM_CMD_FAIL_PROC_COMM_NOT_INIT,
158
Brian Swetlandb8a16e12008-09-09 09:36:50 -0700[diff] [blame]159};
160
161/* List of VREGs that support the Pull Down Resistor setting. */
Dima Zavin5f5d5852009-09-08 20:15:37 -0700[diff] [blame^]162enum vreg_pdown_id {
Brian Swetlandb8a16e12008-09-09 09:36:50 -0700[diff] [blame]163 PM_VREG_PDOWN_MSMA_ID,
164 PM_VREG_PDOWN_MSMP_ID,
165 PM_VREG_PDOWN_MSME1_ID, /* Not supported in Panoramix */
166 PM_VREG_PDOWN_MSMC1_ID, /* Not supported in PM6620 */
167 PM_VREG_PDOWN_MSMC2_ID, /* Supported in PM7500 only */
168 PM_VREG_PDOWN_GP3_ID, /* Supported in PM7500 only */
169 PM_VREG_PDOWN_MSME2_ID, /* Supported in PM7500 and Panoramix only */
170 PM_VREG_PDOWN_GP4_ID, /* Supported in PM7500 only */
171 PM_VREG_PDOWN_GP1_ID, /* Supported in PM7500 only */
172 PM_VREG_PDOWN_TCXO_ID,
173 PM_VREG_PDOWN_PA_ID,
174 PM_VREG_PDOWN_RFTX_ID,
175 PM_VREG_PDOWN_RFRX1_ID,
176 PM_VREG_PDOWN_RFRX2_ID,
177 PM_VREG_PDOWN_SYNT_ID,
178 PM_VREG_PDOWN_WLAN_ID,
179 PM_VREG_PDOWN_USB_ID,
180 PM_VREG_PDOWN_MMC_ID,
181 PM_VREG_PDOWN_RUIM_ID,
182 PM_VREG_PDOWN_MSMC0_ID, /* Supported in PM6610 only */
183 PM_VREG_PDOWN_GP2_ID, /* Supported in PM7500 only */
184 PM_VREG_PDOWN_GP5_ID, /* Supported in PM7500 only */
185 PM_VREG_PDOWN_GP6_ID, /* Supported in PM7500 only */
186 PM_VREG_PDOWN_RF_ID,
187 PM_VREG_PDOWN_RF_VCO_ID,
188 PM_VREG_PDOWN_MPLL_ID,
189 PM_VREG_PDOWN_S2_ID,
190 PM_VREG_PDOWN_S3_ID,
191 PM_VREG_PDOWN_RFUBM_ID,
192
193 /* new for HAN */
194 PM_VREG_PDOWN_RF1_ID,
195 PM_VREG_PDOWN_RF2_ID,
196 PM_VREG_PDOWN_RFA_ID,
197 PM_VREG_PDOWN_CDC2_ID,
198 PM_VREG_PDOWN_RFTX2_ID,
199 PM_VREG_PDOWN_USIM_ID,
200 PM_VREG_PDOWN_USB2P6_ID,
201 PM_VREG_PDOWN_USB3P3_ID,
202 PM_VREG_PDOWN_INVALID_ID,
203
204 /* backward compatible enums only */
205 PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID,
206 PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID,
207 PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID,
208 PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID,
209 PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID,
210 PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID,
211
212 PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID,
213 PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID,
214 PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID,
215 PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID,
216 PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID
217};
218
Dima Zavin5f5d5852009-09-08 20:15:37 -0700[diff] [blame^]219enum {
220 PCOM_CLKRGM_APPS_RESET_USB_PHY = 34,
221 PCOM_CLKRGM_APPS_RESET_USBH = 37,
222};
223
Brian Swetlandb8a16e12008-09-09 09:36:50 -0700[diff] [blame]224/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */
225
226#define GPIO_ENABLE 0
227#define GPIO_DISABLE 1
228
229#define GPIO_INPUT 0
230#define GPIO_OUTPUT 1
231
232#define GPIO_NO_PULL 0
233#define GPIO_PULL_DOWN 1
234#define GPIO_KEEPER 2
235#define GPIO_PULL_UP 3
236
237#define GPIO_2MA 0
238#define GPIO_4MA 1
239#define GPIO_6MA 2
240#define GPIO_8MA 3
241#define GPIO_10MA 4
242#define GPIO_12MA 5
243#define GPIO_14MA 6
244#define GPIO_16MA 7
245
246#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \
247 ((((gpio) & 0x3FF) << 4) | \
248 ((func) & 0xf) | \
249 (((dir) & 0x1) << 14) | \
250 (((pull) & 0x3) << 15) | \
251 (((drvstr) & 0xF) << 17))
252
253int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2);
254
255#endif