blob: 816ecd13f81e241c3fca64b4554b3a235b548d69 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Tony Lindgrendbdf9ced2005-07-10 19:58:11 +01002 * linux/arch/arm/mach-omap1/board-h3.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * This file contains OMAP1710 H3 specific code.
5 *
6 * Copyright (C) 2004 Texas Instruments, Inc.
7 * Copyright (C) 2002 MontaVista Software, Inc.
8 * Copyright (C) 2001 RidgeRun, Inc.
9 * Author: RidgeRun, Inc.
10 * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
15 */
Russell King2f8163b2011-07-26 10:53:52 +010016#include <linux/gpio.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070017#include <linux/types.h>
18#include <linux/init.h>
19#include <linux/major.h>
20#include <linux/kernel.h>
Russell Kingd052d1b2005-10-29 19:07:23 +010021#include <linux/platform_device.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070022#include <linux/errno.h>
Tony Lindgren9b6553c2006-04-02 17:46:30 +010023#include <linux/workqueue.h>
David Brownell8056c6c2007-10-13 23:56:30 +020024#include <linux/i2c.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070025#include <linux/mtd/mtd.h>
Tony Lindgren9b6553c2006-04-02 17:46:30 +010026#include <linux/mtd/nand.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070027#include <linux/mtd/partitions.h>
Ladislav Michl561b0362010-02-15 10:03:32 -080028#include <linux/mtd/physmap.h>
Tony Lindgren9b6553c2006-04-02 17:46:30 +010029#include <linux/input.h>
David Brownell0cc0a442008-02-28 14:44:08 -080030#include <linux/spi/spi.h>
David Brownell6d16bfb2008-01-27 18:14:49 +010031#include <linux/i2c/tps65010.h>
Ladislav Michl3bc48012009-12-11 16:16:33 -080032#include <linux/smc91x.h>
Tomi Valkeinenddba6c72011-09-20 15:23:13 +030033#include <linux/omapfb.h>
Tony Lindgrende6ca332012-09-17 16:24:20 -070034#include <linux/platform_data/gpio-omap.h>
Bryan Wudafbead2012-03-14 02:14:39 +080035#include <linux/leds.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070036
37#include <asm/setup.h>
38#include <asm/page.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070039#include <asm/mach-types.h>
40#include <asm/mach/arch.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070041#include <asm/mach/map.h>
42
Tony Lindgren70c494c2012-09-19 10:46:56 -070043#include <mach/mux.h>
Tony Lindgren54b693d2012-10-02 13:39:28 -070044#include <mach/tc.h>
Arnd Bergmann22037472012-08-24 15:21:06 +020045#include <linux/platform_data/keypad-omap.h>
Tony Lindgren45c3eb72012-11-30 08:41:50 -080046#include <linux/omap-dma.h>
Tony Lindgren578fad42012-09-20 11:41:37 -070047#include <mach/flash.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070048
Tony Lindgren2e3ee9f2012-02-24 10:34:34 -080049#include <mach/hardware.h>
50#include <mach/irqs.h>
Tony Lindgrenb924b202012-06-04 00:56:15 -070051#include <mach/usb.h>
Tony Lindgren2e3ee9f2012-02-24 10:34:34 -080052
53#include "common.h"
Tony Lindgren228fe422009-03-23 18:07:33 -070054#include "board-h3.h"
55
56/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
57#define OMAP1710_ETHR_START 0x04000300
58
David Brownell0cc0a442008-02-28 14:44:08 -080059#define H3_TS_GPIO 48
60
Janusz Krzysztofikda1f0262010-12-20 21:09:22 +000061static const unsigned int h3_keymap[] = {
Tony Lindgren9b6553c2006-04-02 17:46:30 +010062 KEY(0, 0, KEY_LEFT),
Janusz Krzysztofikda1f0262010-12-20 21:09:22 +000063 KEY(1, 0, KEY_RIGHT),
64 KEY(2, 0, KEY_3),
65 KEY(3, 0, KEY_F10),
66 KEY(4, 0, KEY_F5),
67 KEY(5, 0, KEY_9),
68 KEY(0, 1, KEY_DOWN),
Tony Lindgren9b6553c2006-04-02 17:46:30 +010069 KEY(1, 1, KEY_UP),
Janusz Krzysztofikda1f0262010-12-20 21:09:22 +000070 KEY(2, 1, KEY_2),
71 KEY(3, 1, KEY_F9),
72 KEY(4, 1, KEY_F7),
73 KEY(5, 1, KEY_0),
74 KEY(0, 2, KEY_ENTER),
75 KEY(1, 2, KEY_6),
Tony Lindgren9b6553c2006-04-02 17:46:30 +010076 KEY(2, 2, KEY_1),
Janusz Krzysztofikda1f0262010-12-20 21:09:22 +000077 KEY(3, 2, KEY_F2),
78 KEY(4, 2, KEY_F6),
79 KEY(5, 2, KEY_HOME),
80 KEY(0, 3, KEY_8),
81 KEY(1, 3, KEY_5),
82 KEY(2, 3, KEY_F12),
Tony Lindgren9b6553c2006-04-02 17:46:30 +010083 KEY(3, 3, KEY_F3),
Janusz Krzysztofikda1f0262010-12-20 21:09:22 +000084 KEY(4, 3, KEY_F8),
85 KEY(5, 3, KEY_END),
86 KEY(0, 4, KEY_7),
87 KEY(1, 4, KEY_4),
88 KEY(2, 4, KEY_F11),
89 KEY(3, 4, KEY_F1),
Tony Lindgren9b6553c2006-04-02 17:46:30 +010090 KEY(4, 4, KEY_F4),
Janusz Krzysztofikda1f0262010-12-20 21:09:22 +000091 KEY(5, 4, KEY_ESC),
92 KEY(0, 5, KEY_F13),
93 KEY(1, 5, KEY_F14),
94 KEY(2, 5, KEY_F15),
95 KEY(3, 5, KEY_F16),
96 KEY(4, 5, KEY_SLEEP),
Tony Lindgren9b6553c2006-04-02 17:46:30 +010097};
98
99
100static struct mtd_partition nor_partitions[] = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700101 /* bootloader (U-Boot, etc) in first sector */
102 {
103 .name = "bootloader",
104 .offset = 0,
105 .size = SZ_128K,
106 .mask_flags = MTD_WRITEABLE, /* force read-only */
107 },
108 /* bootloader params in the next sector */
109 {
110 .name = "params",
111 .offset = MTDPART_OFS_APPEND,
112 .size = SZ_128K,
113 .mask_flags = 0,
114 },
115 /* kernel */
116 {
117 .name = "kernel",
118 .offset = MTDPART_OFS_APPEND,
119 .size = SZ_2M,
120 .mask_flags = 0
121 },
122 /* file system */
123 {
124 .name = "filesystem",
125 .offset = MTDPART_OFS_APPEND,
126 .size = MTDPART_SIZ_FULL,
127 .mask_flags = 0
128 }
129};
130
Ladislav Michl561b0362010-02-15 10:03:32 -0800131static struct physmap_flash_data nor_data = {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700132 .width = 2,
Ladislav Michl561b0362010-02-15 10:03:32 -0800133 .set_vpp = omap1_set_vpp,
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100134 .parts = nor_partitions,
135 .nr_parts = ARRAY_SIZE(nor_partitions),
Linus Torvalds1da177e2005-04-16 15:20:36 -0700136};
137
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100138static struct resource nor_resource = {
Tony Lindgren7c38cf02005-09-08 23:07:38 +0100139 /* This is on CS3, wherever it's mapped */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700140 .flags = IORESOURCE_MEM,
141};
142
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100143static struct platform_device nor_device = {
Ladislav Michl561b0362010-02-15 10:03:32 -0800144 .name = "physmap-flash",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145 .id = 0,
146 .dev = {
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100147 .platform_data = &nor_data,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148 },
149 .num_resources = 1,
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100150 .resource = &nor_resource,
151};
152
153static struct mtd_partition nand_partitions[] = {
154#if 0
155 /* REVISIT: enable these partitions if you make NAND BOOT work */
156 {
157 .name = "xloader",
158 .offset = 0,
159 .size = 64 * 1024,
160 .mask_flags = MTD_WRITEABLE, /* force read-only */
161 },
162 {
163 .name = "bootloader",
164 .offset = MTDPART_OFS_APPEND,
165 .size = 256 * 1024,
166 .mask_flags = MTD_WRITEABLE, /* force read-only */
167 },
168 {
169 .name = "params",
170 .offset = MTDPART_OFS_APPEND,
171 .size = 192 * 1024,
172 },
173 {
174 .name = "kernel",
175 .offset = MTDPART_OFS_APPEND,
176 .size = 2 * SZ_1M,
177 },
178#endif
179 {
180 .name = "filesystem",
181 .size = MTDPART_SIZ_FULL,
182 .offset = MTDPART_OFS_APPEND,
183 },
184};
185
Ladislav Michl414f552a2009-12-11 16:16:33 -0800186#define H3_NAND_RB_GPIO_PIN 10
187
188static int nand_dev_ready(struct mtd_info *mtd)
189{
190 return gpio_get_value(H3_NAND_RB_GPIO_PIN);
191}
192
Aaro Koskinen277a2852011-01-27 16:39:44 -0800193static struct platform_nand_data nand_platdata = {
Ladislav Michl414f552a2009-12-11 16:16:33 -0800194 .chip = {
195 .nr_chips = 1,
196 .chip_offset = 0,
197 .nr_partitions = ARRAY_SIZE(nand_partitions),
198 .partitions = nand_partitions,
199 .options = NAND_SAMSUNG_LP_OPTIONS,
Ladislav Michl414f552a2009-12-11 16:16:33 -0800200 },
201 .ctrl = {
Paul Walmsley31cde042012-04-13 06:34:31 -0600202 .cmd_ctrl = omap1_nand_cmd_ctl,
Ladislav Michl414f552a2009-12-11 16:16:33 -0800203 .dev_ready = nand_dev_ready,
204
205 },
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100206};
207
208static struct resource nand_resource = {
209 .flags = IORESOURCE_MEM,
210};
211
212static struct platform_device nand_device = {
Ladislav Michl414f552a2009-12-11 16:16:33 -0800213 .name = "gen_nand",
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100214 .id = 0,
215 .dev = {
Ladislav Michl414f552a2009-12-11 16:16:33 -0800216 .platform_data = &nand_platdata,
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100217 },
218 .num_resources = 1,
219 .resource = &nand_resource,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700220};
221
Ladislav Michl3bc48012009-12-11 16:16:33 -0800222static struct smc91x_platdata smc91x_info = {
223 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
224 .leda = RPC_LED_100_10,
225 .ledb = RPC_LED_TX_RX,
226};
227
Linus Torvalds1da177e2005-04-16 15:20:36 -0700228static struct resource smc91x_resources[] = {
229 [0] = {
230 .start = OMAP1710_ETHR_START, /* Physical */
231 .end = OMAP1710_ETHR_START + 0xf,
232 .flags = IORESOURCE_MEM,
233 },
234 [1] = {
Russell Kinge7b3dc72008-01-14 22:30:10 +0000235 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700236 },
237};
238
239static struct platform_device smc91x_device = {
240 .name = "smc91x",
241 .id = 0,
Ladislav Michl3bc48012009-12-11 16:16:33 -0800242 .dev = {
243 .platform_data = &smc91x_info,
244 },
Linus Torvalds1da177e2005-04-16 15:20:36 -0700245 .num_resources = ARRAY_SIZE(smc91x_resources),
246 .resource = smc91x_resources,
247};
248
Tony Lindgrenc2cdaff2010-12-07 16:26:55 -0800249static void __init h3_init_smc91x(void)
250{
251 omap_cfg_reg(W15_1710_GPIO40);
252 if (gpio_request(40, "SMC91x irq") < 0) {
253 printk("Error requesting gpio 40 for smc91x irq\n");
254 return;
255 }
256}
257
Linus Torvalds1da177e2005-04-16 15:20:36 -0700258#define GPTIMER_BASE 0xFFFB1400
259#define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800))
260#define GPTIMER_REGS_SIZE 0x46
261
262static struct resource intlat_resources[] = {
263 [0] = {
264 .start = GPTIMER_REGS(0), /* Physical */
265 .end = GPTIMER_REGS(0) + GPTIMER_REGS_SIZE,
266 .flags = IORESOURCE_MEM,
267 },
268 [1] = {
269 .start = INT_1610_GPTIMER1,
270 .end = INT_1610_GPTIMER1,
271 .flags = IORESOURCE_IRQ,
272 },
273};
274
275static struct platform_device intlat_device = {
276 .name = "omap_intlat",
277 .id = 0,
278 .num_resources = ARRAY_SIZE(intlat_resources),
279 .resource = intlat_resources,
280};
281
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100282static struct resource h3_kp_resources[] = {
283 [0] = {
284 .start = INT_KEYBOARD,
285 .end = INT_KEYBOARD,
286 .flags = IORESOURCE_IRQ,
287 },
288};
289
Janusz Krzysztofikda1f0262010-12-20 21:09:22 +0000290static const struct matrix_keymap_data h3_keymap_data = {
291 .keymap = h3_keymap,
292 .keymap_size = ARRAY_SIZE(h3_keymap),
293};
294
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100295static struct omap_kp_platform_data h3_kp_data = {
Komal Shah4d246072006-09-29 01:59:20 -0700296 .rows = 8,
297 .cols = 8,
Janusz Krzysztofikda1f0262010-12-20 21:09:22 +0000298 .keymap_data = &h3_keymap_data,
299 .rep = true,
Komal Shah4d246072006-09-29 01:59:20 -0700300 .delay = 9,
Janusz Krzysztofikda1f0262010-12-20 21:09:22 +0000301 .dbounce = true,
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100302};
303
304static struct platform_device h3_kp_device = {
305 .name = "omap-keypad",
306 .id = -1,
307 .dev = {
308 .platform_data = &h3_kp_data,
309 },
310 .num_resources = ARRAY_SIZE(h3_kp_resources),
311 .resource = h3_kp_resources,
312};
313
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100314static struct platform_device h3_lcd_device = {
315 .name = "lcd_h3",
316 .id = -1,
317};
318
David Brownell0cc0a442008-02-28 14:44:08 -0800319static struct spi_board_info h3_spi_board_info[] __initdata = {
320 [0] = {
321 .modalias = "tsc2101",
322 .bus_num = 2,
323 .chip_select = 0,
David Brownell0cc0a442008-02-28 14:44:08 -0800324 .max_speed_hz = 16000000,
325 /* .platform_data = &tsc_platform_data, */
326 },
327};
328
Bryan Wudafbead2012-03-14 02:14:39 +0800329static struct gpio_led h3_gpio_led_pins[] = {
330 {
331 .name = "h3:red",
332 .default_trigger = "heartbeat",
333 .gpio = 3,
334 },
335 {
336 .name = "h3:green",
337 .default_trigger = "cpu0",
338 .gpio = OMAP_MPUIO(4),
339 },
340};
341
342static struct gpio_led_platform_data h3_gpio_led_data = {
343 .leds = h3_gpio_led_pins,
344 .num_leds = ARRAY_SIZE(h3_gpio_led_pins),
345};
346
347static struct platform_device h3_gpio_leds = {
348 .name = "leds-gpio",
349 .id = -1,
350 .dev = {
351 .platform_data = &h3_gpio_led_data,
352 },
353};
354
Linus Torvalds1da177e2005-04-16 15:20:36 -0700355static struct platform_device *devices[] __initdata = {
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100356 &nor_device,
357 &nand_device,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700358 &smc91x_device,
359 &intlat_device,
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100360 &h3_kp_device,
361 &h3_lcd_device,
Bryan Wudafbead2012-03-14 02:14:39 +0800362 &h3_gpio_leds,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700363};
364
365static struct omap_usb_config h3_usb_config __initdata = {
366 /* usb1 has a Mini-AB port and external isp1301 transceiver */
367 .otg = 2,
368
369#ifdef CONFIG_USB_GADGET_OMAP
370 .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */
371#elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
372 /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
373 .hmc_mode = 20, /* 1:dev|otg(off) 1:host 2:disabled */
374#endif
375
376 .pins[1] = 3,
377};
378
Tony Lindgren3179a012005-11-10 14:26:48 +0000379static struct omap_lcd_config h3_lcd_config __initdata = {
Tony Lindgren3179a012005-11-10 14:26:48 +0000380 .ctrl_name = "internal",
381};
382
David Brownell0cc0a442008-02-28 14:44:08 -0800383static struct i2c_board_info __initdata h3_i2c_board_info[] = {
384 {
Jean Delvare3760f732008-04-29 23:11:40 +0200385 I2C_BOARD_INFO("tps65013", 0x48),
David Brownell0cc0a442008-02-28 14:44:08 -0800386 },
Jean Delvare9df013b2008-10-14 17:30:02 +0200387 {
388 I2C_BOARD_INFO("isp1301_omap", 0x2d),
Jean Delvare9df013b2008-10-14 17:30:02 +0200389 },
David Brownell0cc0a442008-02-28 14:44:08 -0800390};
391
Linus Torvalds1da177e2005-04-16 15:20:36 -0700392static void __init h3_init(void)
393{
Tony Lindgrenc2cdaff2010-12-07 16:26:55 -0800394 h3_init_smc91x();
395
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100396 /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
397 * to address 0 by a dip switch), NAND on CS2B. The NAND driver will
398 * notice whether a NAND chip is enabled at probe time.
399 *
400 * H3 support NAND-boot, with a dip switch to put NOR on CS2B and NAND
401 * (which on H2 may be 16bit) on CS3. Try detecting that in code here,
402 * to avoid probing every possible flash configuration...
403 */
404 nor_resource.end = nor_resource.start = omap_cs3_phys();
405 nor_resource.end += SZ_32M - 1;
406
407 nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS;
408 nand_resource.end += SZ_4K - 1;
Sasha Levin04494102012-11-08 15:23:09 -0500409 BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0);
Ladislav Michl414f552a2009-12-11 16:16:33 -0800410 gpio_direction_input(H3_NAND_RB_GPIO_PIN);
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100411
412 /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
413 /* GPIO10 pullup/down register, Enable pullup on GPIO10 */
414 omap_cfg_reg(V2_1710_GPIO10);
415
Tony Lindgren93c43f22010-07-05 16:31:39 +0300416 /* Mux pins for keypad */
417 omap_cfg_reg(F18_1610_KBC0);
418 omap_cfg_reg(D20_1610_KBC1);
419 omap_cfg_reg(D19_1610_KBC2);
420 omap_cfg_reg(E18_1610_KBC3);
421 omap_cfg_reg(C21_1610_KBC4);
422 omap_cfg_reg(G18_1610_KBR0);
423 omap_cfg_reg(F19_1610_KBR1);
424 omap_cfg_reg(H14_1610_KBR2);
425 omap_cfg_reg(E20_1610_KBR3);
426 omap_cfg_reg(E19_1610_KBR4);
427 omap_cfg_reg(N19_1610_KBR5);
428
Bryan Wudafbead2012-03-14 02:14:39 +0800429 /* GPIO based LEDs */
430 omap_cfg_reg(P18_1610_GPIO3);
431 omap_cfg_reg(MPUIO4);
432
Tarun Kanti DebBarma46a0a542012-03-29 08:41:01 -0700433 smc91x_resources[1].start = gpio_to_irq(40);
434 smc91x_resources[1].end = gpio_to_irq(40);
Tony Lindgren9b6553c2006-04-02 17:46:30 +0100435 platform_add_devices(devices, ARRAY_SIZE(devices));
Tarun Kanti DebBarma46a0a542012-03-29 08:41:01 -0700436 h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO);
Tony Lindgrene27a93a2007-12-18 20:58:32 -0800437 spi_register_board_info(h3_spi_board_info,
438 ARRAY_SIZE(h3_spi_board_info));
Tony Lindgren3179a012005-11-10 14:26:48 +0000439 omap_serial_init();
Tarun Kanti DebBarma46a0a542012-03-29 08:41:01 -0700440 h3_i2c_board_info[1].irq = gpio_to_irq(14);
Jarkko Nikula1ed16a82007-11-07 06:54:32 +0200441 omap_register_i2c_bus(1, 100, h3_i2c_board_info,
442 ARRAY_SIZE(h3_i2c_board_info));
Tony Lindgrendd0cdd82010-07-05 16:31:30 +0300443 omap1_usb_init(&h3_usb_config);
Felipe Balbi138ab9f2007-11-27 00:01:45 -0400444 h3_mmc_init();
Tomi Valkeinenddba6c72011-09-20 15:23:13 +0300445
446 omapfb_set_lcd_config(&h3_lcd_config);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700447}
448
Linus Torvalds1da177e2005-04-16 15:20:36 -0700449MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
Russell Kinge9dea0c2005-07-03 17:38:58 +0100450 /* Maintainer: Texas Instruments, Inc. */
Nicolas Pitre246e3892011-07-05 22:38:15 -0400451 .atag_offset = 0x100,
Tony Lindgren7b88e622011-10-05 15:14:02 -0700452 .map_io = omap16xx_map_io,
453 .init_early = omap1_init_early,
Tony Lindgren7b88e622011-10-05 15:14:02 -0700454 .init_irq = omap1_init_irq,
Russell Kinge9dea0c2005-07-03 17:38:58 +0100455 .init_machine = h3_init,
Shawn Guo82c3bd02012-04-26 13:49:29 +0800456 .init_late = omap1_init_late,
Stephen Warren6bb27d72012-11-08 12:40:59 -0700457 .init_time = omap1_timer_init,
Russell Kingbaa95882011-11-05 17:06:28 +0000458 .restart = omap1_restart,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700459MACHINE_END