Rafał Miłecki | 0fc6a32 | 2014-08-17 18:33:38 +0200 | [diff] [blame] | 1 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 2 | |
| 3 | #include <linux/kernel.h> |
| 4 | #include <linux/module.h> |
| 5 | #include <linux/slab.h> |
| 6 | #include <linux/delay.h> |
| 7 | #include <linux/bcma/bcma.h> |
| 8 | #include <linux/spi/spi.h> |
| 9 | |
| 10 | #include "spi-bcm53xx.h" |
| 11 | |
| 12 | #define BCM53XXSPI_MAX_SPI_BAUD 13500000 /* 216 MHz? */ |
| 13 | |
| 14 | /* The longest observed required wait was 19 ms */ |
| 15 | #define BCM53XXSPI_SPE_TIMEOUT_MS 80 |
| 16 | |
| 17 | struct bcm53xxspi { |
| 18 | struct bcma_device *core; |
| 19 | struct spi_master *master; |
| 20 | |
| 21 | size_t read_offset; |
| 22 | }; |
| 23 | |
| 24 | static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset) |
| 25 | { |
| 26 | return bcma_read32(b53spi->core, offset); |
| 27 | } |
| 28 | |
| 29 | static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset, |
| 30 | u32 value) |
| 31 | { |
| 32 | bcma_write32(b53spi->core, offset, value); |
| 33 | } |
| 34 | |
| 35 | static inline unsigned int bcm53xxspi_calc_timeout(size_t len) |
| 36 | { |
| 37 | /* Do some magic calculation based on length and buad. Add 10% and 1. */ |
| 38 | return (len * 9000 / BCM53XXSPI_MAX_SPI_BAUD * 110 / 100) + 1; |
| 39 | } |
| 40 | |
| 41 | static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms) |
| 42 | { |
| 43 | unsigned long deadline; |
| 44 | u32 tmp; |
| 45 | |
| 46 | /* SPE bit has to be 0 before we read MSPI STATUS */ |
| 47 | deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000; |
| 48 | do { |
| 49 | tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); |
| 50 | if (!(tmp & B53SPI_MSPI_SPCR2_SPE)) |
| 51 | break; |
| 52 | udelay(5); |
| 53 | } while (!time_after_eq(jiffies, deadline)); |
| 54 | |
| 55 | if (tmp & B53SPI_MSPI_SPCR2_SPE) |
| 56 | goto spi_timeout; |
| 57 | |
| 58 | /* Check status */ |
| 59 | deadline = jiffies + timeout_ms * HZ / 1000; |
| 60 | do { |
| 61 | tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS); |
| 62 | if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) { |
| 63 | bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0); |
| 64 | return 0; |
| 65 | } |
| 66 | |
| 67 | cpu_relax(); |
| 68 | udelay(100); |
| 69 | } while (!time_after_eq(jiffies, deadline)); |
| 70 | |
| 71 | spi_timeout: |
| 72 | bcm53xxspi_write(b53spi, B53SPI_MSPI_MSPI_STATUS, 0); |
| 73 | |
| 74 | pr_err("Timeout waiting for SPI to be ready!\n"); |
| 75 | |
| 76 | return -EBUSY; |
| 77 | } |
| 78 | |
| 79 | static void bcm53xxspi_buf_write(struct bcm53xxspi *b53spi, u8 *w_buf, |
| 80 | size_t len, bool cont) |
| 81 | { |
| 82 | u32 tmp; |
| 83 | int i; |
| 84 | |
| 85 | for (i = 0; i < len; i++) { |
| 86 | /* Transmit Register File MSB */ |
| 87 | bcm53xxspi_write(b53spi, B53SPI_MSPI_TXRAM + 4 * (i * 2), |
| 88 | (unsigned int)w_buf[i]); |
| 89 | } |
| 90 | |
| 91 | for (i = 0; i < len; i++) { |
| 92 | tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL | |
| 93 | B53SPI_CDRAM_PCS_DSCK; |
| 94 | if (!cont && i == len - 1) |
| 95 | tmp &= ~B53SPI_CDRAM_CONT; |
| 96 | tmp &= ~0x1; |
| 97 | /* Command Register File */ |
| 98 | bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp); |
| 99 | } |
| 100 | |
| 101 | /* Set queue pointers */ |
| 102 | bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0); |
| 103 | bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1); |
| 104 | |
| 105 | if (cont) |
| 106 | bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1); |
| 107 | |
| 108 | /* Start SPI transfer */ |
| 109 | tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); |
| 110 | tmp |= B53SPI_MSPI_SPCR2_SPE; |
| 111 | if (cont) |
| 112 | tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD; |
| 113 | bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp); |
| 114 | |
| 115 | /* Wait for SPI to finish */ |
| 116 | bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len)); |
| 117 | |
| 118 | if (!cont) |
| 119 | bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0); |
| 120 | |
| 121 | b53spi->read_offset = len; |
| 122 | } |
| 123 | |
| 124 | static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf, |
| 125 | size_t len, bool cont) |
| 126 | { |
| 127 | u32 tmp; |
| 128 | int i; |
| 129 | |
| 130 | for (i = 0; i < b53spi->read_offset + len; i++) { |
| 131 | tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL | |
| 132 | B53SPI_CDRAM_PCS_DSCK; |
| 133 | if (!cont && i == b53spi->read_offset + len - 1) |
| 134 | tmp &= ~B53SPI_CDRAM_CONT; |
| 135 | tmp &= ~0x1; |
| 136 | /* Command Register File */ |
| 137 | bcm53xxspi_write(b53spi, B53SPI_MSPI_CDRAM + 4 * i, tmp); |
| 138 | } |
| 139 | |
| 140 | /* Set queue pointers */ |
| 141 | bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0); |
| 142 | bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, |
| 143 | b53spi->read_offset + len - 1); |
| 144 | |
| 145 | if (cont) |
| 146 | bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1); |
| 147 | |
| 148 | /* Start SPI transfer */ |
| 149 | tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2); |
| 150 | tmp |= B53SPI_MSPI_SPCR2_SPE; |
| 151 | if (cont) |
| 152 | tmp |= B53SPI_MSPI_SPCR2_CONT_AFTER_CMD; |
| 153 | bcm53xxspi_write(b53spi, B53SPI_MSPI_SPCR2, tmp); |
| 154 | |
| 155 | /* Wait for SPI to finish */ |
| 156 | bcm53xxspi_wait(b53spi, bcm53xxspi_calc_timeout(len)); |
| 157 | |
| 158 | if (!cont) |
| 159 | bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0); |
| 160 | |
| 161 | for (i = 0; i < len; ++i) { |
| 162 | int offset = b53spi->read_offset + i; |
| 163 | |
| 164 | /* Data stored in the transmit register file LSB */ |
| 165 | r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2)); |
| 166 | } |
| 167 | |
| 168 | b53spi->read_offset = 0; |
| 169 | } |
| 170 | |
| 171 | static int bcm53xxspi_transfer_one(struct spi_master *master, |
| 172 | struct spi_device *spi, |
| 173 | struct spi_transfer *t) |
| 174 | { |
| 175 | struct bcm53xxspi *b53spi = spi_master_get_devdata(master); |
| 176 | u8 *buf; |
| 177 | size_t left; |
| 178 | |
| 179 | if (t->tx_buf) { |
| 180 | buf = (u8 *)t->tx_buf; |
| 181 | left = t->len; |
| 182 | while (left) { |
| 183 | size_t to_write = min_t(size_t, 16, left); |
| 184 | bool cont = left - to_write > 0; |
| 185 | |
| 186 | bcm53xxspi_buf_write(b53spi, buf, to_write, cont); |
| 187 | left -= to_write; |
| 188 | buf += to_write; |
| 189 | } |
| 190 | } |
| 191 | |
| 192 | if (t->rx_buf) { |
| 193 | buf = (u8 *)t->rx_buf; |
| 194 | left = t->len; |
| 195 | while (left) { |
| 196 | size_t to_read = min_t(size_t, 16 - b53spi->read_offset, |
| 197 | left); |
| 198 | bool cont = left - to_read > 0; |
| 199 | |
| 200 | bcm53xxspi_buf_read(b53spi, buf, to_read, cont); |
| 201 | left -= to_read; |
| 202 | buf += to_read; |
| 203 | } |
| 204 | } |
| 205 | |
| 206 | return 0; |
| 207 | } |
| 208 | |
| 209 | /************************************************** |
| 210 | * BCMA |
| 211 | **************************************************/ |
| 212 | |
Jingoo Han | 050429a | 2014-08-28 18:21:09 +0900 | [diff] [blame] | 213 | static struct spi_board_info bcm53xx_info = { |
Rafał Miłecki | 0fc6a32 | 2014-08-17 18:33:38 +0200 | [diff] [blame] | 214 | .modalias = "bcm53xxspiflash", |
| 215 | }; |
| 216 | |
| 217 | static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = { |
| 218 | BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS), |
| 219 | BCMA_CORETABLE_END |
| 220 | }; |
| 221 | MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl); |
| 222 | |
| 223 | static int bcm53xxspi_bcma_probe(struct bcma_device *core) |
| 224 | { |
| 225 | struct bcm53xxspi *b53spi; |
| 226 | struct spi_master *master; |
| 227 | int err; |
| 228 | |
| 229 | if (core->bus->drv_cc.core->id.rev != 42) { |
| 230 | pr_err("SPI on SoC with unsupported ChipCommon rev\n"); |
| 231 | return -ENOTSUPP; |
| 232 | } |
| 233 | |
| 234 | master = spi_alloc_master(&core->dev, sizeof(*b53spi)); |
| 235 | if (!master) |
| 236 | return -ENOMEM; |
| 237 | |
| 238 | b53spi = spi_master_get_devdata(master); |
| 239 | b53spi->master = master; |
| 240 | b53spi->core = core; |
| 241 | |
| 242 | master->transfer_one = bcm53xxspi_transfer_one; |
| 243 | |
| 244 | bcma_set_drvdata(core, b53spi); |
| 245 | |
| 246 | err = devm_spi_register_master(&core->dev, master); |
| 247 | if (err) { |
| 248 | spi_master_put(master); |
| 249 | bcma_set_drvdata(core, NULL); |
| 250 | goto out; |
| 251 | } |
| 252 | |
| 253 | /* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */ |
| 254 | spi_new_device(master, &bcm53xx_info); |
| 255 | |
| 256 | out: |
| 257 | return err; |
| 258 | } |
| 259 | |
| 260 | static void bcm53xxspi_bcma_remove(struct bcma_device *core) |
| 261 | { |
| 262 | struct bcm53xxspi *b53spi = bcma_get_drvdata(core); |
| 263 | |
| 264 | spi_unregister_master(b53spi->master); |
| 265 | } |
| 266 | |
| 267 | static struct bcma_driver bcm53xxspi_bcma_driver = { |
| 268 | .name = KBUILD_MODNAME, |
| 269 | .id_table = bcm53xxspi_bcma_tbl, |
| 270 | .probe = bcm53xxspi_bcma_probe, |
| 271 | .remove = bcm53xxspi_bcma_remove, |
| 272 | }; |
| 273 | |
| 274 | /************************************************** |
| 275 | * Init & exit |
| 276 | **************************************************/ |
| 277 | |
| 278 | static int __init bcm53xxspi_module_init(void) |
| 279 | { |
| 280 | int err = 0; |
| 281 | |
| 282 | err = bcma_driver_register(&bcm53xxspi_bcma_driver); |
| 283 | if (err) |
| 284 | pr_err("Failed to register bcma driver: %d\n", err); |
| 285 | |
| 286 | return err; |
| 287 | } |
| 288 | |
| 289 | static void __exit bcm53xxspi_module_exit(void) |
| 290 | { |
| 291 | bcma_driver_unregister(&bcm53xxspi_bcma_driver); |
| 292 | } |
| 293 | |
| 294 | module_init(bcm53xxspi_module_init); |
| 295 | module_exit(bcm53xxspi_module_exit); |
Axel Lin | 61d38b9 | 2014-09-26 14:19:22 +0800 | [diff] [blame^] | 296 | |
| 297 | MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver"); |
| 298 | MODULE_AUTHOR("Rafał Miłecki <zajec5@gmail.com>"); |
| 299 | MODULE_LICENSE("GPL"); |