Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Freescale ESAI ALSA SoC Digital Audio Interface (DAI) driver |
| 3 | * |
| 4 | * Copyright (C) 2014 Freescale Semiconductor, Inc. |
| 5 | * |
| 6 | * This file is licensed under the terms of the GNU General Public License |
| 7 | * version 2. This program is licensed "as is" without any warranty of any |
| 8 | * kind, whether express or implied. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/clk.h> |
| 12 | #include <linux/dmaengine.h> |
| 13 | #include <linux/module.h> |
| 14 | #include <linux/of_irq.h> |
| 15 | #include <linux/of_platform.h> |
| 16 | #include <sound/dmaengine_pcm.h> |
| 17 | #include <sound/pcm_params.h> |
| 18 | |
| 19 | #include "fsl_esai.h" |
| 20 | #include "imx-pcm.h" |
| 21 | |
| 22 | #define FSL_ESAI_RATES SNDRV_PCM_RATE_8000_192000 |
| 23 | #define FSL_ESAI_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ |
| 24 | SNDRV_PCM_FMTBIT_S16_LE | \ |
| 25 | SNDRV_PCM_FMTBIT_S20_3LE | \ |
| 26 | SNDRV_PCM_FMTBIT_S24_LE) |
| 27 | |
| 28 | /** |
| 29 | * fsl_esai: ESAI private data |
| 30 | * |
| 31 | * @dma_params_rx: DMA parameters for receive channel |
| 32 | * @dma_params_tx: DMA parameters for transmit channel |
| 33 | * @pdev: platform device pointer |
| 34 | * @regmap: regmap handler |
| 35 | * @coreclk: clock source to access register |
| 36 | * @extalclk: esai clock source to derive HCK, SCK and FS |
| 37 | * @fsysclk: system clock source to derive HCK, SCK and FS |
| 38 | * @fifo_depth: depth of tx/rx FIFO |
| 39 | * @slot_width: width of each DAI slot |
Shengjiu Wang | de0d712 | 2014-08-08 14:47:21 +0800 | [diff] [blame] | 40 | * @slots: number of slots |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 41 | * @hck_rate: clock rate of desired HCKx clock |
Nicolin Chen | f975ca4 | 2014-05-06 16:56:01 +0800 | [diff] [blame] | 42 | * @sck_rate: clock rate of desired SCKx clock |
| 43 | * @hck_dir: the direction of HCKx pads |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 44 | * @sck_div: if using PSR/PM dividers for SCKx clock |
| 45 | * @slave_mode: if fully using DAI slave mode |
| 46 | * @synchronous: if using tx/rx synchronous mode |
| 47 | * @name: driver name |
| 48 | */ |
| 49 | struct fsl_esai { |
| 50 | struct snd_dmaengine_dai_dma_data dma_params_rx; |
| 51 | struct snd_dmaengine_dai_dma_data dma_params_tx; |
| 52 | struct platform_device *pdev; |
| 53 | struct regmap *regmap; |
| 54 | struct clk *coreclk; |
| 55 | struct clk *extalclk; |
| 56 | struct clk *fsysclk; |
| 57 | u32 fifo_depth; |
| 58 | u32 slot_width; |
Shengjiu Wang | de0d712 | 2014-08-08 14:47:21 +0800 | [diff] [blame] | 59 | u32 slots; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 60 | u32 hck_rate[2]; |
Nicolin Chen | f975ca4 | 2014-05-06 16:56:01 +0800 | [diff] [blame] | 61 | u32 sck_rate[2]; |
| 62 | bool hck_dir[2]; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 63 | bool sck_div[2]; |
| 64 | bool slave_mode; |
| 65 | bool synchronous; |
| 66 | char name[32]; |
| 67 | }; |
| 68 | |
| 69 | static irqreturn_t esai_isr(int irq, void *devid) |
| 70 | { |
| 71 | struct fsl_esai *esai_priv = (struct fsl_esai *)devid; |
| 72 | struct platform_device *pdev = esai_priv->pdev; |
| 73 | u32 esr; |
| 74 | |
| 75 | regmap_read(esai_priv->regmap, REG_ESAI_ESR, &esr); |
| 76 | |
| 77 | if (esr & ESAI_ESR_TINIT_MASK) |
| 78 | dev_dbg(&pdev->dev, "isr: Transmition Initialized\n"); |
| 79 | |
| 80 | if (esr & ESAI_ESR_RFF_MASK) |
| 81 | dev_warn(&pdev->dev, "isr: Receiving overrun\n"); |
| 82 | |
| 83 | if (esr & ESAI_ESR_TFE_MASK) |
| 84 | dev_warn(&pdev->dev, "isr: Transmition underrun\n"); |
| 85 | |
| 86 | if (esr & ESAI_ESR_TLS_MASK) |
| 87 | dev_dbg(&pdev->dev, "isr: Just transmitted the last slot\n"); |
| 88 | |
| 89 | if (esr & ESAI_ESR_TDE_MASK) |
| 90 | dev_dbg(&pdev->dev, "isr: Transmition data exception\n"); |
| 91 | |
| 92 | if (esr & ESAI_ESR_TED_MASK) |
| 93 | dev_dbg(&pdev->dev, "isr: Transmitting even slots\n"); |
| 94 | |
| 95 | if (esr & ESAI_ESR_TD_MASK) |
| 96 | dev_dbg(&pdev->dev, "isr: Transmitting data\n"); |
| 97 | |
| 98 | if (esr & ESAI_ESR_RLS_MASK) |
| 99 | dev_dbg(&pdev->dev, "isr: Just received the last slot\n"); |
| 100 | |
| 101 | if (esr & ESAI_ESR_RDE_MASK) |
| 102 | dev_dbg(&pdev->dev, "isr: Receiving data exception\n"); |
| 103 | |
| 104 | if (esr & ESAI_ESR_RED_MASK) |
| 105 | dev_dbg(&pdev->dev, "isr: Receiving even slots\n"); |
| 106 | |
| 107 | if (esr & ESAI_ESR_RD_MASK) |
| 108 | dev_dbg(&pdev->dev, "isr: Receiving data\n"); |
| 109 | |
| 110 | return IRQ_HANDLED; |
| 111 | } |
| 112 | |
| 113 | /** |
| 114 | * This function is used to calculate the divisors of psr, pm, fp and it is |
| 115 | * supposed to be called in set_dai_sysclk() and set_bclk(). |
| 116 | * |
| 117 | * @ratio: desired overall ratio for the paticipating dividers |
| 118 | * @usefp: for HCK setting, there is no need to set fp divider |
| 119 | * @fp: bypass other dividers by setting fp directly if fp != 0 |
| 120 | * @tx: current setting is for playback or capture |
| 121 | */ |
| 122 | static int fsl_esai_divisor_cal(struct snd_soc_dai *dai, bool tx, u32 ratio, |
| 123 | bool usefp, u32 fp) |
| 124 | { |
| 125 | struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); |
| 126 | u32 psr, pm = 999, maxfp, prod, sub, savesub, i, j; |
| 127 | |
| 128 | maxfp = usefp ? 16 : 1; |
| 129 | |
| 130 | if (usefp && fp) |
| 131 | goto out_fp; |
| 132 | |
| 133 | if (ratio > 2 * 8 * 256 * maxfp || ratio < 2) { |
| 134 | dev_err(dai->dev, "the ratio is out of range (2 ~ %d)\n", |
| 135 | 2 * 8 * 256 * maxfp); |
| 136 | return -EINVAL; |
| 137 | } else if (ratio % 2) { |
| 138 | dev_err(dai->dev, "the raio must be even if using upper divider\n"); |
| 139 | return -EINVAL; |
| 140 | } |
| 141 | |
| 142 | ratio /= 2; |
| 143 | |
| 144 | psr = ratio <= 256 * maxfp ? ESAI_xCCR_xPSR_BYPASS : ESAI_xCCR_xPSR_DIV8; |
| 145 | |
| 146 | /* Set the max fluctuation -- 0.1% of the max devisor */ |
| 147 | savesub = (psr ? 1 : 8) * 256 * maxfp / 1000; |
| 148 | |
| 149 | /* Find the best value for PM */ |
| 150 | for (i = 1; i <= 256; i++) { |
| 151 | for (j = 1; j <= maxfp; j++) { |
| 152 | /* PSR (1 or 8) * PM (1 ~ 256) * FP (1 ~ 16) */ |
| 153 | prod = (psr ? 1 : 8) * i * j; |
| 154 | |
| 155 | if (prod == ratio) |
| 156 | sub = 0; |
| 157 | else if (prod / ratio == 1) |
| 158 | sub = prod - ratio; |
| 159 | else if (ratio / prod == 1) |
| 160 | sub = ratio - prod; |
| 161 | else |
| 162 | continue; |
| 163 | |
| 164 | /* Calculate the fraction */ |
| 165 | sub = sub * 1000 / ratio; |
| 166 | if (sub < savesub) { |
| 167 | savesub = sub; |
| 168 | pm = i; |
| 169 | fp = j; |
| 170 | } |
| 171 | |
| 172 | /* We are lucky */ |
| 173 | if (savesub == 0) |
| 174 | goto out; |
| 175 | } |
| 176 | } |
| 177 | |
| 178 | if (pm == 999) { |
| 179 | dev_err(dai->dev, "failed to calculate proper divisors\n"); |
| 180 | return -EINVAL; |
| 181 | } |
| 182 | |
| 183 | out: |
| 184 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xCCR(tx), |
| 185 | ESAI_xCCR_xPSR_MASK | ESAI_xCCR_xPM_MASK, |
| 186 | psr | ESAI_xCCR_xPM(pm)); |
| 187 | |
| 188 | out_fp: |
| 189 | /* Bypass fp if not being required */ |
| 190 | if (maxfp <= 1) |
| 191 | return 0; |
| 192 | |
| 193 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xCCR(tx), |
| 194 | ESAI_xCCR_xFP_MASK, ESAI_xCCR_xFP(fp)); |
| 195 | |
| 196 | return 0; |
| 197 | } |
| 198 | |
| 199 | /** |
| 200 | * This function mainly configures the clock frequency of MCLK (HCKT/HCKR) |
| 201 | * |
| 202 | * @Parameters: |
| 203 | * clk_id: The clock source of HCKT/HCKR |
| 204 | * (Input from outside; output from inside, FSYS or EXTAL) |
| 205 | * freq: The required clock rate of HCKT/HCKR |
| 206 | * dir: The clock direction of HCKT/HCKR |
| 207 | * |
| 208 | * Note: If the direction is input, we do not care about clk_id. |
| 209 | */ |
| 210 | static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, |
| 211 | unsigned int freq, int dir) |
| 212 | { |
| 213 | struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); |
| 214 | struct clk *clksrc = esai_priv->extalclk; |
| 215 | bool tx = clk_id <= ESAI_HCKT_EXTAL; |
| 216 | bool in = dir == SND_SOC_CLOCK_IN; |
Xiubo Li | 3e18523 | 2014-04-04 15:10:26 +0800 | [diff] [blame] | 217 | u32 ratio, ecr = 0; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 218 | unsigned long clk_rate; |
Xiubo Li | 3e18523 | 2014-04-04 15:10:26 +0800 | [diff] [blame] | 219 | int ret; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 220 | |
Nicolin Chen | f975ca4 | 2014-05-06 16:56:01 +0800 | [diff] [blame] | 221 | /* Bypass divider settings if the requirement doesn't change */ |
| 222 | if (freq == esai_priv->hck_rate[tx] && dir == esai_priv->hck_dir[tx]) |
| 223 | return 0; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 224 | |
| 225 | /* sck_div can be only bypassed if ETO/ERO=0 and SNC_SOC_CLOCK_OUT */ |
| 226 | esai_priv->sck_div[tx] = true; |
| 227 | |
| 228 | /* Set the direction of HCKT/HCKR pins */ |
| 229 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xCCR(tx), |
| 230 | ESAI_xCCR_xHCKD, in ? 0 : ESAI_xCCR_xHCKD); |
| 231 | |
| 232 | if (in) |
| 233 | goto out; |
| 234 | |
| 235 | switch (clk_id) { |
| 236 | case ESAI_HCKT_FSYS: |
| 237 | case ESAI_HCKR_FSYS: |
| 238 | clksrc = esai_priv->fsysclk; |
| 239 | break; |
| 240 | case ESAI_HCKT_EXTAL: |
| 241 | ecr |= ESAI_ECR_ETI; |
| 242 | case ESAI_HCKR_EXTAL: |
| 243 | ecr |= ESAI_ECR_ERI; |
| 244 | break; |
| 245 | default: |
| 246 | return -EINVAL; |
| 247 | } |
| 248 | |
| 249 | if (IS_ERR(clksrc)) { |
| 250 | dev_err(dai->dev, "no assigned %s clock\n", |
| 251 | clk_id % 2 ? "extal" : "fsys"); |
| 252 | return PTR_ERR(clksrc); |
| 253 | } |
| 254 | clk_rate = clk_get_rate(clksrc); |
| 255 | |
| 256 | ratio = clk_rate / freq; |
| 257 | if (ratio * freq > clk_rate) |
| 258 | ret = ratio * freq - clk_rate; |
| 259 | else if (ratio * freq < clk_rate) |
| 260 | ret = clk_rate - ratio * freq; |
| 261 | else |
| 262 | ret = 0; |
| 263 | |
| 264 | /* Block if clock source can not be divided into the required rate */ |
| 265 | if (ret != 0 && clk_rate / ret < 1000) { |
| 266 | dev_err(dai->dev, "failed to derive required HCK%c rate\n", |
| 267 | tx ? 'T' : 'R'); |
| 268 | return -EINVAL; |
| 269 | } |
| 270 | |
Nicolin Chen | 57ebbca | 2014-05-06 16:56:00 +0800 | [diff] [blame] | 271 | /* Only EXTAL source can be output directly without using PSR and PM */ |
| 272 | if (ratio == 1 && clksrc == esai_priv->extalclk) { |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 273 | /* Bypass all the dividers if not being needed */ |
| 274 | ecr |= tx ? ESAI_ECR_ETO : ESAI_ECR_ERO; |
| 275 | goto out; |
Nicolin Chen | 57ebbca | 2014-05-06 16:56:00 +0800 | [diff] [blame] | 276 | } else if (ratio < 2) { |
| 277 | /* The ratio should be no less than 2 if using other sources */ |
| 278 | dev_err(dai->dev, "failed to derive required HCK%c rate\n", |
| 279 | tx ? 'T' : 'R'); |
| 280 | return -EINVAL; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 281 | } |
| 282 | |
| 283 | ret = fsl_esai_divisor_cal(dai, tx, ratio, false, 0); |
| 284 | if (ret) |
| 285 | return ret; |
| 286 | |
| 287 | esai_priv->sck_div[tx] = false; |
| 288 | |
| 289 | out: |
Nicolin Chen | f975ca4 | 2014-05-06 16:56:01 +0800 | [diff] [blame] | 290 | esai_priv->hck_dir[tx] = dir; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 291 | esai_priv->hck_rate[tx] = freq; |
| 292 | |
| 293 | regmap_update_bits(esai_priv->regmap, REG_ESAI_ECR, |
| 294 | tx ? ESAI_ECR_ETI | ESAI_ECR_ETO : |
| 295 | ESAI_ECR_ERI | ESAI_ECR_ERO, ecr); |
| 296 | |
| 297 | return 0; |
| 298 | } |
| 299 | |
| 300 | /** |
| 301 | * This function configures the related dividers according to the bclk rate |
| 302 | */ |
| 303 | static int fsl_esai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq) |
| 304 | { |
| 305 | struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); |
| 306 | u32 hck_rate = esai_priv->hck_rate[tx]; |
| 307 | u32 sub, ratio = hck_rate / freq; |
Nicolin Chen | f975ca4 | 2014-05-06 16:56:01 +0800 | [diff] [blame] | 308 | int ret; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 309 | |
Nicolin Chen | f975ca4 | 2014-05-06 16:56:01 +0800 | [diff] [blame] | 310 | /* Don't apply for fully slave mode or unchanged bclk */ |
| 311 | if (esai_priv->slave_mode || esai_priv->sck_rate[tx] == freq) |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 312 | return 0; |
| 313 | |
| 314 | if (ratio * freq > hck_rate) |
| 315 | sub = ratio * freq - hck_rate; |
| 316 | else if (ratio * freq < hck_rate) |
| 317 | sub = hck_rate - ratio * freq; |
| 318 | else |
| 319 | sub = 0; |
| 320 | |
| 321 | /* Block if clock source can not be divided into the required rate */ |
| 322 | if (sub != 0 && hck_rate / sub < 1000) { |
| 323 | dev_err(dai->dev, "failed to derive required SCK%c rate\n", |
| 324 | tx ? 'T' : 'R'); |
| 325 | return -EINVAL; |
| 326 | } |
| 327 | |
Nicolin Chen | 89e47f6 | 2014-05-06 16:55:59 +0800 | [diff] [blame] | 328 | /* The ratio should be contented by FP alone if bypassing PM and PSR */ |
| 329 | if (!esai_priv->sck_div[tx] && (ratio > 16 || ratio == 0)) { |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 330 | dev_err(dai->dev, "the ratio is out of range (1 ~ 16)\n"); |
| 331 | return -EINVAL; |
| 332 | } |
| 333 | |
Nicolin Chen | f975ca4 | 2014-05-06 16:56:01 +0800 | [diff] [blame] | 334 | ret = fsl_esai_divisor_cal(dai, tx, ratio, true, |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 335 | esai_priv->sck_div[tx] ? 0 : ratio); |
Nicolin Chen | f975ca4 | 2014-05-06 16:56:01 +0800 | [diff] [blame] | 336 | if (ret) |
| 337 | return ret; |
| 338 | |
| 339 | /* Save current bclk rate */ |
| 340 | esai_priv->sck_rate[tx] = freq; |
| 341 | |
| 342 | return 0; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 343 | } |
| 344 | |
| 345 | static int fsl_esai_set_dai_tdm_slot(struct snd_soc_dai *dai, u32 tx_mask, |
| 346 | u32 rx_mask, int slots, int slot_width) |
| 347 | { |
| 348 | struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); |
| 349 | |
| 350 | regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, |
| 351 | ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots)); |
| 352 | |
| 353 | regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMA, |
| 354 | ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(tx_mask)); |
| 355 | regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMB, |
Xiubo Li | 236014a | 2014-02-10 14:47:17 +0800 | [diff] [blame] | 356 | ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(tx_mask)); |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 357 | |
| 358 | regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, |
| 359 | ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots)); |
| 360 | |
| 361 | regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMA, |
| 362 | ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(rx_mask)); |
| 363 | regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMB, |
Xiubo Li | 236014a | 2014-02-10 14:47:17 +0800 | [diff] [blame] | 364 | ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(rx_mask)); |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 365 | |
| 366 | esai_priv->slot_width = slot_width; |
Shengjiu Wang | de0d712 | 2014-08-08 14:47:21 +0800 | [diff] [blame] | 367 | esai_priv->slots = slots; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 368 | |
| 369 | return 0; |
| 370 | } |
| 371 | |
| 372 | static int fsl_esai_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) |
| 373 | { |
| 374 | struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); |
| 375 | u32 xcr = 0, xccr = 0, mask; |
| 376 | |
| 377 | /* DAI mode */ |
| 378 | switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| 379 | case SND_SOC_DAIFMT_I2S: |
| 380 | /* Data on rising edge of bclk, frame low, 1clk before data */ |
| 381 | xcr |= ESAI_xCR_xFSR; |
| 382 | xccr |= ESAI_xCCR_xFSP | ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; |
| 383 | break; |
| 384 | case SND_SOC_DAIFMT_LEFT_J: |
| 385 | /* Data on rising edge of bclk, frame high */ |
| 386 | xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; |
| 387 | break; |
| 388 | case SND_SOC_DAIFMT_RIGHT_J: |
| 389 | /* Data on rising edge of bclk, frame high, right aligned */ |
| 390 | xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCR_xWA; |
| 391 | break; |
| 392 | case SND_SOC_DAIFMT_DSP_A: |
| 393 | /* Data on rising edge of bclk, frame high, 1clk before data */ |
| 394 | xcr |= ESAI_xCR_xFSL | ESAI_xCR_xFSR; |
| 395 | xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; |
| 396 | break; |
| 397 | case SND_SOC_DAIFMT_DSP_B: |
| 398 | /* Data on rising edge of bclk, frame high */ |
| 399 | xcr |= ESAI_xCR_xFSL; |
| 400 | xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; |
| 401 | break; |
| 402 | default: |
| 403 | return -EINVAL; |
| 404 | } |
| 405 | |
| 406 | /* DAI clock inversion */ |
| 407 | switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| 408 | case SND_SOC_DAIFMT_NB_NF: |
| 409 | /* Nothing to do for both normal cases */ |
| 410 | break; |
| 411 | case SND_SOC_DAIFMT_IB_NF: |
| 412 | /* Invert bit clock */ |
| 413 | xccr ^= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP; |
| 414 | break; |
| 415 | case SND_SOC_DAIFMT_NB_IF: |
| 416 | /* Invert frame clock */ |
| 417 | xccr ^= ESAI_xCCR_xFSP; |
| 418 | break; |
| 419 | case SND_SOC_DAIFMT_IB_IF: |
| 420 | /* Invert both clocks */ |
| 421 | xccr ^= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCCR_xFSP; |
| 422 | break; |
| 423 | default: |
| 424 | return -EINVAL; |
| 425 | } |
| 426 | |
| 427 | esai_priv->slave_mode = false; |
| 428 | |
| 429 | /* DAI clock master masks */ |
| 430 | switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| 431 | case SND_SOC_DAIFMT_CBM_CFM: |
| 432 | esai_priv->slave_mode = true; |
| 433 | break; |
| 434 | case SND_SOC_DAIFMT_CBS_CFM: |
| 435 | xccr |= ESAI_xCCR_xCKD; |
| 436 | break; |
| 437 | case SND_SOC_DAIFMT_CBM_CFS: |
| 438 | xccr |= ESAI_xCCR_xFSD; |
| 439 | break; |
| 440 | case SND_SOC_DAIFMT_CBS_CFS: |
| 441 | xccr |= ESAI_xCCR_xFSD | ESAI_xCCR_xCKD; |
| 442 | break; |
| 443 | default: |
| 444 | return -EINVAL; |
| 445 | } |
| 446 | |
| 447 | mask = ESAI_xCR_xFSL | ESAI_xCR_xFSR; |
| 448 | regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, mask, xcr); |
| 449 | regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, mask, xcr); |
| 450 | |
| 451 | mask = ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCCR_xFSP | |
| 452 | ESAI_xCCR_xFSD | ESAI_xCCR_xCKD | ESAI_xCR_xWA; |
| 453 | regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, mask, xccr); |
| 454 | regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, mask, xccr); |
| 455 | |
| 456 | return 0; |
| 457 | } |
| 458 | |
| 459 | static int fsl_esai_startup(struct snd_pcm_substream *substream, |
| 460 | struct snd_soc_dai *dai) |
| 461 | { |
| 462 | struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); |
Xiubo Li | 3e18523 | 2014-04-04 15:10:26 +0800 | [diff] [blame] | 463 | int ret; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 464 | |
| 465 | /* |
| 466 | * Some platforms might use the same bit to gate all three or two of |
| 467 | * clocks, so keep all clocks open/close at the same time for safety |
| 468 | */ |
Fabio Estevam | 33529ec | 2014-02-10 16:01:28 -0200 | [diff] [blame] | 469 | ret = clk_prepare_enable(esai_priv->coreclk); |
| 470 | if (ret) |
| 471 | return ret; |
| 472 | if (!IS_ERR(esai_priv->extalclk)) { |
| 473 | ret = clk_prepare_enable(esai_priv->extalclk); |
| 474 | if (ret) |
| 475 | goto err_extalck; |
| 476 | } |
| 477 | if (!IS_ERR(esai_priv->fsysclk)) { |
| 478 | ret = clk_prepare_enable(esai_priv->fsysclk); |
| 479 | if (ret) |
| 480 | goto err_fsysclk; |
| 481 | } |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 482 | |
| 483 | if (!dai->active) { |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 484 | /* Set synchronous mode */ |
| 485 | regmap_update_bits(esai_priv->regmap, REG_ESAI_SAICR, |
| 486 | ESAI_SAICR_SYNC, esai_priv->synchronous ? |
| 487 | ESAI_SAICR_SYNC : 0); |
| 488 | |
| 489 | /* Set a default slot number -- 2 */ |
| 490 | regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, |
| 491 | ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(2)); |
| 492 | regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, |
| 493 | ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(2)); |
| 494 | } |
| 495 | |
| 496 | return 0; |
Fabio Estevam | 33529ec | 2014-02-10 16:01:28 -0200 | [diff] [blame] | 497 | |
| 498 | err_fsysclk: |
| 499 | if (!IS_ERR(esai_priv->extalclk)) |
| 500 | clk_disable_unprepare(esai_priv->extalclk); |
| 501 | err_extalck: |
| 502 | clk_disable_unprepare(esai_priv->coreclk); |
| 503 | |
| 504 | return ret; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 505 | } |
| 506 | |
| 507 | static int fsl_esai_hw_params(struct snd_pcm_substream *substream, |
| 508 | struct snd_pcm_hw_params *params, |
| 509 | struct snd_soc_dai *dai) |
| 510 | { |
| 511 | struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); |
| 512 | bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; |
| 513 | u32 width = snd_pcm_format_width(params_format(params)); |
| 514 | u32 channels = params_channels(params); |
Shengjiu Wang | de0d712 | 2014-08-08 14:47:21 +0800 | [diff] [blame] | 515 | u32 pins = DIV_ROUND_UP(channels, esai_priv->slots); |
Nicolin Chen | 86ea522 | 2014-10-24 16:48:12 -0700 | [diff] [blame] | 516 | u32 slot_width = width; |
Xiubo Li | 3e18523 | 2014-04-04 15:10:26 +0800 | [diff] [blame] | 517 | u32 bclk, mask, val; |
| 518 | int ret; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 519 | |
Nicolin Chen | 86ea522 | 2014-10-24 16:48:12 -0700 | [diff] [blame] | 520 | /* Override slot_width if being specifially set */ |
| 521 | if (esai_priv->slot_width) |
| 522 | slot_width = esai_priv->slot_width; |
| 523 | |
| 524 | bclk = params_rate(params) * slot_width * esai_priv->slots; |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 525 | |
| 526 | ret = fsl_esai_set_bclk(dai, tx, bclk); |
| 527 | if (ret) |
| 528 | return ret; |
| 529 | |
| 530 | /* Use Normal mode to support monaural audio */ |
| 531 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), |
| 532 | ESAI_xCR_xMOD_MASK, params_channels(params) > 1 ? |
| 533 | ESAI_xCR_xMOD_NETWORK : 0); |
| 534 | |
| 535 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), |
| 536 | ESAI_xFCR_xFR_MASK, ESAI_xFCR_xFR); |
| 537 | |
| 538 | mask = ESAI_xFCR_xFR_MASK | ESAI_xFCR_xWA_MASK | ESAI_xFCR_xFWM_MASK | |
| 539 | (tx ? ESAI_xFCR_TE_MASK | ESAI_xFCR_TIEN : ESAI_xFCR_RE_MASK); |
| 540 | val = ESAI_xFCR_xWA(width) | ESAI_xFCR_xFWM(esai_priv->fifo_depth) | |
Shengjiu Wang | de0d712 | 2014-08-08 14:47:21 +0800 | [diff] [blame] | 541 | (tx ? ESAI_xFCR_TE(pins) | ESAI_xFCR_TIEN : ESAI_xFCR_RE(pins)); |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 542 | |
| 543 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), mask, val); |
| 544 | |
| 545 | mask = ESAI_xCR_xSWS_MASK | (tx ? ESAI_xCR_PADC : 0); |
Nicolin Chen | 86ea522 | 2014-10-24 16:48:12 -0700 | [diff] [blame] | 546 | val = ESAI_xCR_xSWS(slot_width, width) | (tx ? ESAI_xCR_PADC : 0); |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 547 | |
| 548 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), mask, val); |
| 549 | |
Nicolin Chen | 4f8210f | 2014-05-06 16:56:02 +0800 | [diff] [blame] | 550 | /* Remove ESAI personal reset by configuring ESAI_PCRC and ESAI_PRRC */ |
| 551 | regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC, |
| 552 | ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO)); |
| 553 | regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC, |
| 554 | ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO)); |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 555 | return 0; |
| 556 | } |
| 557 | |
| 558 | static void fsl_esai_shutdown(struct snd_pcm_substream *substream, |
| 559 | struct snd_soc_dai *dai) |
| 560 | { |
| 561 | struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); |
| 562 | |
| 563 | if (!IS_ERR(esai_priv->fsysclk)) |
| 564 | clk_disable_unprepare(esai_priv->fsysclk); |
| 565 | if (!IS_ERR(esai_priv->extalclk)) |
| 566 | clk_disable_unprepare(esai_priv->extalclk); |
| 567 | clk_disable_unprepare(esai_priv->coreclk); |
| 568 | } |
| 569 | |
| 570 | static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd, |
| 571 | struct snd_soc_dai *dai) |
| 572 | { |
| 573 | struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); |
| 574 | bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; |
| 575 | u8 i, channels = substream->runtime->channels; |
Shengjiu Wang | de0d712 | 2014-08-08 14:47:21 +0800 | [diff] [blame] | 576 | u32 pins = DIV_ROUND_UP(channels, esai_priv->slots); |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 577 | |
| 578 | switch (cmd) { |
| 579 | case SNDRV_PCM_TRIGGER_START: |
| 580 | case SNDRV_PCM_TRIGGER_RESUME: |
| 581 | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| 582 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), |
| 583 | ESAI_xFCR_xFEN_MASK, ESAI_xFCR_xFEN); |
| 584 | |
| 585 | /* Write initial words reqiured by ESAI as normal procedure */ |
| 586 | for (i = 0; tx && i < channels; i++) |
| 587 | regmap_write(esai_priv->regmap, REG_ESAI_ETDR, 0x0); |
| 588 | |
| 589 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), |
| 590 | tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, |
Shengjiu Wang | de0d712 | 2014-08-08 14:47:21 +0800 | [diff] [blame] | 591 | tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins)); |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 592 | break; |
| 593 | case SNDRV_PCM_TRIGGER_SUSPEND: |
| 594 | case SNDRV_PCM_TRIGGER_STOP: |
| 595 | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| 596 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), |
| 597 | tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK, 0); |
| 598 | |
| 599 | /* Disable and reset FIFO */ |
| 600 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), |
| 601 | ESAI_xFCR_xFR | ESAI_xFCR_xFEN, ESAI_xFCR_xFR); |
| 602 | regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), |
| 603 | ESAI_xFCR_xFR, 0); |
| 604 | break; |
| 605 | default: |
| 606 | return -EINVAL; |
| 607 | } |
| 608 | |
| 609 | return 0; |
| 610 | } |
| 611 | |
| 612 | static struct snd_soc_dai_ops fsl_esai_dai_ops = { |
| 613 | .startup = fsl_esai_startup, |
| 614 | .shutdown = fsl_esai_shutdown, |
| 615 | .trigger = fsl_esai_trigger, |
| 616 | .hw_params = fsl_esai_hw_params, |
| 617 | .set_sysclk = fsl_esai_set_dai_sysclk, |
| 618 | .set_fmt = fsl_esai_set_dai_fmt, |
| 619 | .set_tdm_slot = fsl_esai_set_dai_tdm_slot, |
| 620 | }; |
| 621 | |
| 622 | static int fsl_esai_dai_probe(struct snd_soc_dai *dai) |
| 623 | { |
| 624 | struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai); |
| 625 | |
| 626 | snd_soc_dai_init_dma_data(dai, &esai_priv->dma_params_tx, |
| 627 | &esai_priv->dma_params_rx); |
| 628 | |
| 629 | return 0; |
| 630 | } |
| 631 | |
| 632 | static struct snd_soc_dai_driver fsl_esai_dai = { |
| 633 | .probe = fsl_esai_dai_probe, |
| 634 | .playback = { |
Nicolin Chen | 74ccb27 | 2014-07-30 11:10:26 +0800 | [diff] [blame] | 635 | .stream_name = "CPU-Playback", |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 636 | .channels_min = 1, |
| 637 | .channels_max = 12, |
| 638 | .rates = FSL_ESAI_RATES, |
| 639 | .formats = FSL_ESAI_FORMATS, |
| 640 | }, |
| 641 | .capture = { |
Nicolin Chen | 74ccb27 | 2014-07-30 11:10:26 +0800 | [diff] [blame] | 642 | .stream_name = "CPU-Capture", |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 643 | .channels_min = 1, |
| 644 | .channels_max = 8, |
| 645 | .rates = FSL_ESAI_RATES, |
| 646 | .formats = FSL_ESAI_FORMATS, |
| 647 | }, |
| 648 | .ops = &fsl_esai_dai_ops, |
| 649 | }; |
| 650 | |
| 651 | static const struct snd_soc_component_driver fsl_esai_component = { |
| 652 | .name = "fsl-esai", |
| 653 | }; |
| 654 | |
| 655 | static bool fsl_esai_readable_reg(struct device *dev, unsigned int reg) |
| 656 | { |
| 657 | switch (reg) { |
| 658 | case REG_ESAI_ERDR: |
| 659 | case REG_ESAI_ECR: |
| 660 | case REG_ESAI_ESR: |
| 661 | case REG_ESAI_TFCR: |
| 662 | case REG_ESAI_TFSR: |
| 663 | case REG_ESAI_RFCR: |
| 664 | case REG_ESAI_RFSR: |
| 665 | case REG_ESAI_RX0: |
| 666 | case REG_ESAI_RX1: |
| 667 | case REG_ESAI_RX2: |
| 668 | case REG_ESAI_RX3: |
| 669 | case REG_ESAI_SAISR: |
| 670 | case REG_ESAI_SAICR: |
| 671 | case REG_ESAI_TCR: |
| 672 | case REG_ESAI_TCCR: |
| 673 | case REG_ESAI_RCR: |
| 674 | case REG_ESAI_RCCR: |
| 675 | case REG_ESAI_TSMA: |
| 676 | case REG_ESAI_TSMB: |
| 677 | case REG_ESAI_RSMA: |
| 678 | case REG_ESAI_RSMB: |
| 679 | case REG_ESAI_PRRC: |
| 680 | case REG_ESAI_PCRC: |
| 681 | return true; |
| 682 | default: |
| 683 | return false; |
| 684 | } |
| 685 | } |
| 686 | |
| 687 | static bool fsl_esai_writeable_reg(struct device *dev, unsigned int reg) |
| 688 | { |
| 689 | switch (reg) { |
| 690 | case REG_ESAI_ETDR: |
| 691 | case REG_ESAI_ECR: |
| 692 | case REG_ESAI_TFCR: |
| 693 | case REG_ESAI_RFCR: |
| 694 | case REG_ESAI_TX0: |
| 695 | case REG_ESAI_TX1: |
| 696 | case REG_ESAI_TX2: |
| 697 | case REG_ESAI_TX3: |
| 698 | case REG_ESAI_TX4: |
| 699 | case REG_ESAI_TX5: |
| 700 | case REG_ESAI_TSR: |
| 701 | case REG_ESAI_SAICR: |
| 702 | case REG_ESAI_TCR: |
| 703 | case REG_ESAI_TCCR: |
| 704 | case REG_ESAI_RCR: |
| 705 | case REG_ESAI_RCCR: |
| 706 | case REG_ESAI_TSMA: |
| 707 | case REG_ESAI_TSMB: |
| 708 | case REG_ESAI_RSMA: |
| 709 | case REG_ESAI_RSMB: |
| 710 | case REG_ESAI_PRRC: |
| 711 | case REG_ESAI_PCRC: |
| 712 | return true; |
| 713 | default: |
| 714 | return false; |
| 715 | } |
| 716 | } |
| 717 | |
Xiubo Li | 92bd033 | 2014-08-25 11:31:00 +0800 | [diff] [blame] | 718 | static const struct regmap_config fsl_esai_regmap_config = { |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 719 | .reg_bits = 32, |
| 720 | .reg_stride = 4, |
| 721 | .val_bits = 32, |
| 722 | |
| 723 | .max_register = REG_ESAI_PCRC, |
| 724 | .readable_reg = fsl_esai_readable_reg, |
| 725 | .writeable_reg = fsl_esai_writeable_reg, |
| 726 | }; |
| 727 | |
| 728 | static int fsl_esai_probe(struct platform_device *pdev) |
| 729 | { |
| 730 | struct device_node *np = pdev->dev.of_node; |
| 731 | struct fsl_esai *esai_priv; |
| 732 | struct resource *res; |
| 733 | const uint32_t *iprop; |
| 734 | void __iomem *regs; |
| 735 | int irq, ret; |
| 736 | |
| 737 | esai_priv = devm_kzalloc(&pdev->dev, sizeof(*esai_priv), GFP_KERNEL); |
| 738 | if (!esai_priv) |
| 739 | return -ENOMEM; |
| 740 | |
| 741 | esai_priv->pdev = pdev; |
Daniel Mack | 6aa256b6 | 2014-10-19 09:07:36 +0200 | [diff] [blame] | 742 | strncpy(esai_priv->name, np->name, sizeof(esai_priv->name) - 1); |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 743 | |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 744 | /* Get the addresses and IRQ */ |
| 745 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 746 | regs = devm_ioremap_resource(&pdev->dev, res); |
| 747 | if (IS_ERR(regs)) |
| 748 | return PTR_ERR(regs); |
| 749 | |
| 750 | esai_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev, |
| 751 | "core", regs, &fsl_esai_regmap_config); |
| 752 | if (IS_ERR(esai_priv->regmap)) { |
| 753 | dev_err(&pdev->dev, "failed to init regmap: %ld\n", |
| 754 | PTR_ERR(esai_priv->regmap)); |
| 755 | return PTR_ERR(esai_priv->regmap); |
| 756 | } |
| 757 | |
| 758 | esai_priv->coreclk = devm_clk_get(&pdev->dev, "core"); |
| 759 | if (IS_ERR(esai_priv->coreclk)) { |
| 760 | dev_err(&pdev->dev, "failed to get core clock: %ld\n", |
| 761 | PTR_ERR(esai_priv->coreclk)); |
| 762 | return PTR_ERR(esai_priv->coreclk); |
| 763 | } |
| 764 | |
| 765 | esai_priv->extalclk = devm_clk_get(&pdev->dev, "extal"); |
| 766 | if (IS_ERR(esai_priv->extalclk)) |
| 767 | dev_warn(&pdev->dev, "failed to get extal clock: %ld\n", |
| 768 | PTR_ERR(esai_priv->extalclk)); |
| 769 | |
| 770 | esai_priv->fsysclk = devm_clk_get(&pdev->dev, "fsys"); |
| 771 | if (IS_ERR(esai_priv->fsysclk)) |
| 772 | dev_warn(&pdev->dev, "failed to get fsys clock: %ld\n", |
| 773 | PTR_ERR(esai_priv->fsysclk)); |
| 774 | |
| 775 | irq = platform_get_irq(pdev, 0); |
| 776 | if (irq < 0) { |
Fabio Estevam | da2d452 | 2015-01-07 13:44:35 -0200 | [diff] [blame] | 777 | dev_err(&pdev->dev, "no irq for node %s\n", pdev->name); |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 778 | return irq; |
| 779 | } |
| 780 | |
| 781 | ret = devm_request_irq(&pdev->dev, irq, esai_isr, 0, |
| 782 | esai_priv->name, esai_priv); |
| 783 | if (ret) { |
| 784 | dev_err(&pdev->dev, "failed to claim irq %u\n", irq); |
| 785 | return ret; |
| 786 | } |
| 787 | |
Shengjiu Wang | de0d712 | 2014-08-08 14:47:21 +0800 | [diff] [blame] | 788 | /* Set a default slot number */ |
| 789 | esai_priv->slots = 2; |
| 790 | |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 791 | /* Set a default master/slave state */ |
| 792 | esai_priv->slave_mode = true; |
| 793 | |
| 794 | /* Determine the FIFO depth */ |
| 795 | iprop = of_get_property(np, "fsl,fifo-depth", NULL); |
| 796 | if (iprop) |
| 797 | esai_priv->fifo_depth = be32_to_cpup(iprop); |
| 798 | else |
| 799 | esai_priv->fifo_depth = 64; |
| 800 | |
| 801 | esai_priv->dma_params_tx.maxburst = 16; |
| 802 | esai_priv->dma_params_rx.maxburst = 16; |
| 803 | esai_priv->dma_params_tx.addr = res->start + REG_ESAI_ETDR; |
| 804 | esai_priv->dma_params_rx.addr = res->start + REG_ESAI_ERDR; |
| 805 | |
| 806 | esai_priv->synchronous = |
| 807 | of_property_read_bool(np, "fsl,esai-synchronous"); |
| 808 | |
| 809 | /* Implement full symmetry for synchronous mode */ |
| 810 | if (esai_priv->synchronous) { |
| 811 | fsl_esai_dai.symmetric_rates = 1; |
| 812 | fsl_esai_dai.symmetric_channels = 1; |
| 813 | fsl_esai_dai.symmetric_samplebits = 1; |
| 814 | } |
| 815 | |
| 816 | dev_set_drvdata(&pdev->dev, esai_priv); |
| 817 | |
| 818 | /* Reset ESAI unit */ |
| 819 | ret = regmap_write(esai_priv->regmap, REG_ESAI_ECR, ESAI_ECR_ERST); |
| 820 | if (ret) { |
| 821 | dev_err(&pdev->dev, "failed to reset ESAI: %d\n", ret); |
| 822 | return ret; |
| 823 | } |
| 824 | |
| 825 | /* |
| 826 | * We need to enable ESAI so as to access some of its registers. |
| 827 | * Otherwise, we would fail to dump regmap from user space. |
| 828 | */ |
| 829 | ret = regmap_write(esai_priv->regmap, REG_ESAI_ECR, ESAI_ECR_ESAIEN); |
| 830 | if (ret) { |
| 831 | dev_err(&pdev->dev, "failed to enable ESAI: %d\n", ret); |
| 832 | return ret; |
| 833 | } |
| 834 | |
| 835 | ret = devm_snd_soc_register_component(&pdev->dev, &fsl_esai_component, |
| 836 | &fsl_esai_dai, 1); |
| 837 | if (ret) { |
| 838 | dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); |
| 839 | return ret; |
| 840 | } |
| 841 | |
| 842 | ret = imx_pcm_dma_init(pdev); |
| 843 | if (ret) |
| 844 | dev_err(&pdev->dev, "failed to init imx pcm dma: %d\n", ret); |
| 845 | |
| 846 | return ret; |
| 847 | } |
| 848 | |
| 849 | static const struct of_device_id fsl_esai_dt_ids[] = { |
| 850 | { .compatible = "fsl,imx35-esai", }, |
Xiubo Li | b21cc2f | 2014-04-04 15:10:28 +0800 | [diff] [blame] | 851 | { .compatible = "fsl,vf610-esai", }, |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 852 | {} |
| 853 | }; |
| 854 | MODULE_DEVICE_TABLE(of, fsl_esai_dt_ids); |
| 855 | |
| 856 | static struct platform_driver fsl_esai_driver = { |
| 857 | .probe = fsl_esai_probe, |
| 858 | .driver = { |
| 859 | .name = "fsl-esai-dai", |
Nicolin Chen | 43d24e7 | 2014-01-10 17:54:06 +0800 | [diff] [blame] | 860 | .of_match_table = fsl_esai_dt_ids, |
| 861 | }, |
| 862 | }; |
| 863 | |
| 864 | module_platform_driver(fsl_esai_driver); |
| 865 | |
| 866 | MODULE_AUTHOR("Freescale Semiconductor, Inc."); |
| 867 | MODULE_DESCRIPTION("Freescale ESAI CPU DAI driver"); |
| 868 | MODULE_LICENSE("GPL v2"); |
| 869 | MODULE_ALIAS("platform:fsl-esai-dai"); |