Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 1 | /* |
| 2 | * This program is free software; you can redistribute it and/or modify |
| 3 | * it under the terms of the GNU General Public License as published by |
| 4 | * the Free Software Foundation; either version 2 of the License, or |
| 5 | * (at your option) any later version. |
| 6 | * |
| 7 | * This program is distributed in the hope that it will be useful, |
| 8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 10 | * GNU General Public License for more details. |
| 11 | * |
| 12 | * You should have received a copy of the GNU General Public License |
| 13 | * along with this program; if not, write to the Free Software |
| 14 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 15 | * |
| 16 | */ |
| 17 | |
| 18 | #include <linux/init.h> |
Stephen Rothwell | 36db045 | 2010-03-29 16:02:50 +1100 | [diff] [blame] | 19 | #include <linux/slab.h> |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 20 | #include <linux/usb.h> |
| 21 | #include <linux/usb/audio.h> |
Daniel Mack | 7e84789 | 2010-03-11 21:13:20 +0100 | [diff] [blame] | 22 | #include <linux/usb/audio-v2.h> |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 23 | |
| 24 | #include <sound/core.h> |
| 25 | #include <sound/pcm.h> |
| 26 | |
| 27 | #include "usbaudio.h" |
| 28 | #include "card.h" |
| 29 | #include "proc.h" |
| 30 | #include "quirks.h" |
| 31 | #include "endpoint.h" |
| 32 | #include "urb.h" |
| 33 | #include "pcm.h" |
| 34 | #include "helper.h" |
| 35 | #include "format.h" |
| 36 | |
| 37 | /* |
| 38 | * free a substream |
| 39 | */ |
| 40 | static void free_substream(struct snd_usb_substream *subs) |
| 41 | { |
| 42 | struct list_head *p, *n; |
| 43 | |
| 44 | if (!subs->num_formats) |
| 45 | return; /* not initialized */ |
| 46 | list_for_each_safe(p, n, &subs->fmt_list) { |
| 47 | struct audioformat *fp = list_entry(p, struct audioformat, list); |
| 48 | kfree(fp->rate_table); |
| 49 | kfree(fp); |
| 50 | } |
| 51 | kfree(subs->rate_list.list); |
| 52 | } |
| 53 | |
| 54 | |
| 55 | /* |
| 56 | * free a usb stream instance |
| 57 | */ |
| 58 | static void snd_usb_audio_stream_free(struct snd_usb_stream *stream) |
| 59 | { |
| 60 | free_substream(&stream->substream[0]); |
| 61 | free_substream(&stream->substream[1]); |
| 62 | list_del(&stream->list); |
| 63 | kfree(stream); |
| 64 | } |
| 65 | |
| 66 | static void snd_usb_audio_pcm_free(struct snd_pcm *pcm) |
| 67 | { |
| 68 | struct snd_usb_stream *stream = pcm->private_data; |
| 69 | if (stream) { |
| 70 | stream->pcm = NULL; |
| 71 | snd_usb_audio_stream_free(stream); |
| 72 | } |
| 73 | } |
| 74 | |
| 75 | |
| 76 | /* |
| 77 | * add this endpoint to the chip instance. |
| 78 | * if a stream with the same endpoint already exists, append to it. |
| 79 | * if not, create a new pcm stream. |
| 80 | */ |
| 81 | int snd_usb_add_audio_endpoint(struct snd_usb_audio *chip, int stream, struct audioformat *fp) |
| 82 | { |
| 83 | struct list_head *p; |
| 84 | struct snd_usb_stream *as; |
| 85 | struct snd_usb_substream *subs; |
| 86 | struct snd_pcm *pcm; |
| 87 | int err; |
| 88 | |
| 89 | list_for_each(p, &chip->pcm_list) { |
| 90 | as = list_entry(p, struct snd_usb_stream, list); |
| 91 | if (as->fmt_type != fp->fmt_type) |
| 92 | continue; |
| 93 | subs = &as->substream[stream]; |
| 94 | if (!subs->endpoint) |
| 95 | continue; |
| 96 | if (subs->endpoint == fp->endpoint) { |
| 97 | list_add_tail(&fp->list, &subs->fmt_list); |
| 98 | subs->num_formats++; |
Clemens Ladisch | 015eb0b | 2010-03-04 19:46:15 +0100 | [diff] [blame] | 99 | subs->formats |= fp->formats; |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 100 | return 0; |
| 101 | } |
| 102 | } |
| 103 | /* look for an empty stream */ |
| 104 | list_for_each(p, &chip->pcm_list) { |
| 105 | as = list_entry(p, struct snd_usb_stream, list); |
| 106 | if (as->fmt_type != fp->fmt_type) |
| 107 | continue; |
| 108 | subs = &as->substream[stream]; |
| 109 | if (subs->endpoint) |
| 110 | continue; |
| 111 | err = snd_pcm_new_stream(as->pcm, stream, 1); |
| 112 | if (err < 0) |
| 113 | return err; |
| 114 | snd_usb_init_substream(as, stream, fp); |
| 115 | return 0; |
| 116 | } |
| 117 | |
| 118 | /* create a new pcm */ |
| 119 | as = kzalloc(sizeof(*as), GFP_KERNEL); |
| 120 | if (!as) |
| 121 | return -ENOMEM; |
| 122 | as->pcm_index = chip->pcm_devs; |
| 123 | as->chip = chip; |
| 124 | as->fmt_type = fp->fmt_type; |
| 125 | err = snd_pcm_new(chip->card, "USB Audio", chip->pcm_devs, |
| 126 | stream == SNDRV_PCM_STREAM_PLAYBACK ? 1 : 0, |
| 127 | stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1, |
| 128 | &pcm); |
| 129 | if (err < 0) { |
| 130 | kfree(as); |
| 131 | return err; |
| 132 | } |
| 133 | as->pcm = pcm; |
| 134 | pcm->private_data = as; |
| 135 | pcm->private_free = snd_usb_audio_pcm_free; |
| 136 | pcm->info_flags = 0; |
| 137 | if (chip->pcm_devs > 0) |
| 138 | sprintf(pcm->name, "USB Audio #%d", chip->pcm_devs); |
| 139 | else |
| 140 | strcpy(pcm->name, "USB Audio"); |
| 141 | |
| 142 | snd_usb_init_substream(as, stream, fp); |
| 143 | |
| 144 | list_add(&as->list, &chip->pcm_list); |
| 145 | chip->pcm_devs++; |
| 146 | |
| 147 | snd_usb_proc_pcm_format_add(as); |
| 148 | |
| 149 | return 0; |
| 150 | } |
| 151 | |
Daniel Mack | 43b8e3b | 2010-05-26 18:11:38 +0200 | [diff] [blame] | 152 | static int parse_uac_endpoint_attributes(struct snd_usb_audio *chip, |
| 153 | struct usb_host_interface *alts, |
| 154 | int protocol, int iface_no) |
| 155 | { |
| 156 | /* parsed with a v1 header here. that's ok as we only look at the |
| 157 | * header first which is the same for both versions */ |
| 158 | struct uac_iso_endpoint_descriptor *csep; |
| 159 | struct usb_interface_descriptor *altsd = get_iface_desc(alts); |
| 160 | int attributes = 0; |
| 161 | |
| 162 | csep = snd_usb_find_desc(alts->endpoint[0].extra, alts->endpoint[0].extralen, NULL, USB_DT_CS_ENDPOINT); |
| 163 | |
| 164 | /* Creamware Noah has this descriptor after the 2nd endpoint */ |
| 165 | if (!csep && altsd->bNumEndpoints >= 2) |
| 166 | csep = snd_usb_find_desc(alts->endpoint[1].extra, alts->endpoint[1].extralen, NULL, USB_DT_CS_ENDPOINT); |
| 167 | |
| 168 | if (!csep || csep->bLength < 7 || |
| 169 | csep->bDescriptorSubtype != UAC_EP_GENERAL) { |
| 170 | snd_printk(KERN_WARNING "%d:%u:%d : no or invalid" |
| 171 | " class specific endpoint descriptor\n", |
| 172 | chip->dev->devnum, iface_no, |
| 173 | altsd->bAlternateSetting); |
| 174 | return 0; |
| 175 | } |
| 176 | |
| 177 | if (protocol == UAC_VERSION_1) { |
| 178 | attributes = csep->bmAttributes; |
| 179 | } else { |
| 180 | struct uac2_iso_endpoint_descriptor *csep2 = |
| 181 | (struct uac2_iso_endpoint_descriptor *) csep; |
| 182 | |
| 183 | attributes = csep->bmAttributes & UAC_EP_CS_ATTR_FILL_MAX; |
| 184 | |
| 185 | /* emulate the endpoint attributes of a v1 device */ |
| 186 | if (csep2->bmControls & UAC2_CONTROL_PITCH) |
| 187 | attributes |= UAC_EP_CS_ATTR_PITCH_CONTROL; |
| 188 | } |
| 189 | |
| 190 | return attributes; |
| 191 | } |
| 192 | |
Daniel Mack | 79f920f | 2010-05-31 14:51:31 +0200 | [diff] [blame] | 193 | static struct uac2_input_terminal_descriptor * |
| 194 | snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface, |
| 195 | int terminal_id) |
| 196 | { |
| 197 | struct uac2_input_terminal_descriptor *term = NULL; |
| 198 | |
| 199 | while ((term = snd_usb_find_csint_desc(ctrl_iface->extra, |
| 200 | ctrl_iface->extralen, |
| 201 | term, UAC_INPUT_TERMINAL))) { |
| 202 | if (term->bTerminalID == terminal_id) |
| 203 | return term; |
| 204 | } |
| 205 | |
| 206 | return NULL; |
| 207 | } |
| 208 | |
| 209 | static struct uac2_output_terminal_descriptor * |
| 210 | snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface, |
| 211 | int terminal_id) |
| 212 | { |
| 213 | struct uac2_output_terminal_descriptor *term = NULL; |
| 214 | |
| 215 | while ((term = snd_usb_find_csint_desc(ctrl_iface->extra, |
| 216 | ctrl_iface->extralen, |
| 217 | term, UAC_OUTPUT_TERMINAL))) { |
| 218 | if (term->bTerminalID == terminal_id) |
| 219 | return term; |
| 220 | } |
| 221 | |
| 222 | return NULL; |
| 223 | } |
| 224 | |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 225 | int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no) |
| 226 | { |
| 227 | struct usb_device *dev; |
| 228 | struct usb_interface *iface; |
| 229 | struct usb_host_interface *alts; |
| 230 | struct usb_interface_descriptor *altsd; |
| 231 | int i, altno, err, stream; |
| 232 | int format = 0, num_channels = 0; |
| 233 | struct audioformat *fp = NULL; |
Daniel Mack | 79f920f | 2010-05-31 14:51:31 +0200 | [diff] [blame] | 234 | int num, protocol, clock = 0; |
Daniel Mack | 74754f9 | 2010-05-26 18:11:36 +0200 | [diff] [blame] | 235 | struct uac_format_type_i_continuous_descriptor *fmt; |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 236 | |
| 237 | dev = chip->dev; |
| 238 | |
| 239 | /* parse the interface's altsettings */ |
| 240 | iface = usb_ifnum_to_if(dev, iface_no); |
| 241 | |
| 242 | num = iface->num_altsetting; |
| 243 | |
| 244 | /* |
| 245 | * Dallas DS4201 workaround: It presents 5 altsettings, but the last |
| 246 | * one misses syncpipe, and does not produce any sound. |
| 247 | */ |
| 248 | if (chip->usb_id == USB_ID(0x04fa, 0x4201)) |
| 249 | num = 4; |
| 250 | |
| 251 | for (i = 0; i < num; i++) { |
| 252 | alts = &iface->altsetting[i]; |
| 253 | altsd = get_iface_desc(alts); |
| 254 | protocol = altsd->bInterfaceProtocol; |
| 255 | /* skip invalid one */ |
| 256 | if ((altsd->bInterfaceClass != USB_CLASS_AUDIO && |
| 257 | altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC) || |
| 258 | (altsd->bInterfaceSubClass != USB_SUBCLASS_AUDIOSTREAMING && |
| 259 | altsd->bInterfaceSubClass != USB_SUBCLASS_VENDOR_SPEC) || |
| 260 | altsd->bNumEndpoints < 1 || |
| 261 | le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == 0) |
| 262 | continue; |
| 263 | /* must be isochronous */ |
| 264 | if ((get_endpoint(alts, 0)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != |
| 265 | USB_ENDPOINT_XFER_ISOC) |
| 266 | continue; |
| 267 | /* check direction */ |
| 268 | stream = (get_endpoint(alts, 0)->bEndpointAddress & USB_DIR_IN) ? |
| 269 | SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; |
| 270 | altno = altsd->bAlternateSetting; |
| 271 | |
| 272 | if (snd_usb_apply_interface_quirk(chip, iface_no, altno)) |
| 273 | continue; |
| 274 | |
| 275 | /* get audio formats */ |
| 276 | switch (protocol) { |
| 277 | case UAC_VERSION_1: { |
Daniel Mack | 69da9bc | 2010-06-16 17:57:28 +0200 | [diff] [blame^] | 278 | struct uac1_as_header_descriptor *as = |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 279 | snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL); |
| 280 | |
| 281 | if (!as) { |
| 282 | snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n", |
| 283 | dev->devnum, iface_no, altno); |
| 284 | continue; |
| 285 | } |
| 286 | |
| 287 | if (as->bLength < sizeof(*as)) { |
| 288 | snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n", |
| 289 | dev->devnum, iface_no, altno); |
| 290 | continue; |
| 291 | } |
| 292 | |
| 293 | format = le16_to_cpu(as->wFormatTag); /* remember the format value */ |
| 294 | break; |
| 295 | } |
| 296 | |
| 297 | case UAC_VERSION_2: { |
Daniel Mack | 79f920f | 2010-05-31 14:51:31 +0200 | [diff] [blame] | 298 | struct uac2_input_terminal_descriptor *input_term; |
| 299 | struct uac2_output_terminal_descriptor *output_term; |
Daniel Mack | 69da9bc | 2010-06-16 17:57:28 +0200 | [diff] [blame^] | 300 | struct uac2_as_header_descriptor *as = |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 301 | snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL); |
| 302 | |
| 303 | if (!as) { |
| 304 | snd_printk(KERN_ERR "%d:%u:%d : UAC_AS_GENERAL descriptor not found\n", |
| 305 | dev->devnum, iface_no, altno); |
| 306 | continue; |
| 307 | } |
| 308 | |
| 309 | if (as->bLength < sizeof(*as)) { |
| 310 | snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_AS_GENERAL desc\n", |
| 311 | dev->devnum, iface_no, altno); |
| 312 | continue; |
| 313 | } |
| 314 | |
| 315 | num_channels = as->bNrChannels; |
| 316 | format = le32_to_cpu(as->bmFormats); |
| 317 | |
Daniel Mack | 79f920f | 2010-05-31 14:51:31 +0200 | [diff] [blame] | 318 | /* lookup the terminal associated to this interface |
| 319 | * to extract the clock */ |
| 320 | input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf, |
| 321 | as->bTerminalLink); |
| 322 | if (input_term) { |
| 323 | clock = input_term->bCSourceID; |
| 324 | break; |
| 325 | } |
| 326 | |
| 327 | output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf, |
| 328 | as->bTerminalLink); |
| 329 | if (output_term) { |
| 330 | clock = output_term->bCSourceID; |
| 331 | break; |
| 332 | } |
| 333 | |
| 334 | snd_printk(KERN_ERR "%d:%u:%d : bogus bTerminalLink %d\n", |
| 335 | dev->devnum, iface_no, altno, as->bTerminalLink); |
| 336 | continue; |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 337 | } |
| 338 | |
| 339 | default: |
| 340 | snd_printk(KERN_ERR "%d:%u:%d : unknown interface protocol %04x\n", |
| 341 | dev->devnum, iface_no, altno, protocol); |
| 342 | continue; |
| 343 | } |
| 344 | |
| 345 | /* get format type */ |
| 346 | fmt = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_FORMAT_TYPE); |
| 347 | if (!fmt) { |
| 348 | snd_printk(KERN_ERR "%d:%u:%d : no UAC_FORMAT_TYPE desc\n", |
| 349 | dev->devnum, iface_no, altno); |
| 350 | continue; |
| 351 | } |
Daniel Mack | 74754f9 | 2010-05-26 18:11:36 +0200 | [diff] [blame] | 352 | if (((protocol == UAC_VERSION_1) && (fmt->bLength < 8)) || |
| 353 | ((protocol == UAC_VERSION_2) && (fmt->bLength != 6))) { |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 354 | snd_printk(KERN_ERR "%d:%u:%d : invalid UAC_FORMAT_TYPE desc\n", |
| 355 | dev->devnum, iface_no, altno); |
| 356 | continue; |
| 357 | } |
| 358 | |
| 359 | /* |
| 360 | * Blue Microphones workaround: The last altsetting is identical |
| 361 | * with the previous one, except for a larger packet size, but |
| 362 | * is actually a mislabeled two-channel setting; ignore it. |
| 363 | */ |
Daniel Mack | 74754f9 | 2010-05-26 18:11:36 +0200 | [diff] [blame] | 364 | if (fmt->bNrChannels == 1 && |
| 365 | fmt->bSubframeSize == 2 && |
| 366 | altno == 2 && num == 3 && |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 367 | fp && fp->altsetting == 1 && fp->channels == 1 && |
Clemens Ladisch | 015eb0b | 2010-03-04 19:46:15 +0100 | [diff] [blame] | 368 | fp->formats == SNDRV_PCM_FMTBIT_S16_LE && |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 369 | protocol == UAC_VERSION_1 && |
| 370 | le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize) == |
| 371 | fp->maxpacksize * 2) |
| 372 | continue; |
| 373 | |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 374 | fp = kzalloc(sizeof(*fp), GFP_KERNEL); |
| 375 | if (! fp) { |
| 376 | snd_printk(KERN_ERR "cannot malloc\n"); |
| 377 | return -ENOMEM; |
| 378 | } |
| 379 | |
| 380 | fp->iface = iface_no; |
| 381 | fp->altsetting = altno; |
| 382 | fp->altset_idx = i; |
| 383 | fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress; |
| 384 | fp->ep_attr = get_endpoint(alts, 0)->bmAttributes; |
| 385 | fp->datainterval = snd_usb_parse_datainterval(chip, alts); |
| 386 | fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize); |
| 387 | /* num_channels is only set for v2 interfaces */ |
| 388 | fp->channels = num_channels; |
| 389 | if (snd_usb_get_speed(dev) == USB_SPEED_HIGH) |
| 390 | fp->maxpacksize = (((fp->maxpacksize >> 11) & 3) + 1) |
| 391 | * (fp->maxpacksize & 0x7ff); |
Daniel Mack | 43b8e3b | 2010-05-26 18:11:38 +0200 | [diff] [blame] | 392 | fp->attributes = parse_uac_endpoint_attributes(chip, alts, protocol, iface_no); |
Daniel Mack | 79f920f | 2010-05-31 14:51:31 +0200 | [diff] [blame] | 393 | fp->clock = clock; |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 394 | |
| 395 | /* some quirks for attributes here */ |
| 396 | |
| 397 | switch (chip->usb_id) { |
| 398 | case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */ |
| 399 | /* Optoplay sets the sample rate attribute although |
| 400 | * it seems not supporting it in fact. |
| 401 | */ |
| 402 | fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE; |
| 403 | break; |
| 404 | case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */ |
| 405 | case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */ |
Felix Homann | fca5bca | 2010-03-25 11:29:14 +0100 | [diff] [blame] | 406 | case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra 8 */ |
| 407 | case USB_ID(0x0763, 0x2081): /* M-Audio Fast Track Ultra 8R */ |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 408 | /* doesn't set the sample rate attribute, but supports it */ |
| 409 | fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE; |
| 410 | break; |
| 411 | case USB_ID(0x047f, 0x0ca1): /* plantronics headset */ |
| 412 | case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is |
| 413 | an older model 77d:223) */ |
| 414 | /* |
| 415 | * plantronics headset and Griffin iMic have set adaptive-in |
| 416 | * although it's really not... |
| 417 | */ |
| 418 | fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE; |
| 419 | if (stream == SNDRV_PCM_STREAM_PLAYBACK) |
| 420 | fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE; |
| 421 | else |
| 422 | fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC; |
| 423 | break; |
| 424 | } |
| 425 | |
| 426 | /* ok, let's parse further... */ |
| 427 | if (snd_usb_parse_audio_format(chip, fp, format, fmt, stream, alts) < 0) { |
| 428 | kfree(fp->rate_table); |
| 429 | kfree(fp); |
Jiri Slaby | 272cbc9 | 2010-06-21 17:03:21 +0200 | [diff] [blame] | 430 | fp = NULL; |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 431 | continue; |
| 432 | } |
| 433 | |
| 434 | snd_printdd(KERN_INFO "%d:%u:%d: add audio endpoint %#x\n", dev->devnum, iface_no, altno, fp->endpoint); |
| 435 | err = snd_usb_add_audio_endpoint(chip, stream, fp); |
| 436 | if (err < 0) { |
| 437 | kfree(fp->rate_table); |
| 438 | kfree(fp); |
| 439 | return err; |
| 440 | } |
| 441 | /* try to set the interface... */ |
| 442 | usb_set_interface(chip->dev, iface_no, altno); |
Daniel Mack | 767d75a | 2010-03-04 19:46:17 +0100 | [diff] [blame] | 443 | snd_usb_init_pitch(chip, iface_no, alts, fp); |
| 444 | snd_usb_init_sample_rate(chip, iface_no, alts, fp, fp->rate_max); |
Daniel Mack | e577999 | 2010-03-04 19:46:13 +0100 | [diff] [blame] | 445 | } |
| 446 | return 0; |
| 447 | } |
| 448 | |