| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | |
| 2 | /* Definitions for Cirrus Logic CL-CD180 8-port async mux chip */ |
| 3 | #define CD180_NCH 8 /* Total number of channels */ |
| 4 | #define CD180_TPC 16 /* Ticks per character */ |
| 5 | #define CD180_NFIFO 8 /* TX FIFO size */ |
| 6 | |
| 7 | /* Global registers */ |
| 8 | #define CD180_GFRCR 0x6b /* Global Firmware Revision Code Register */ |
| 9 | #define CD180_SRCR 0x66 /* Service Request Configuration Register */ |
| 10 | #define CD180_PPRH 0x70 /* Prescaler Period Register High */ |
| 11 | #define CD180_PPRL 0x71 /* Prescaler Period Register Low */ |
| 12 | #define CD180_MSMR 0x61 /* Modem Service Match Register */ |
| 13 | #define CD180_TSMR 0x62 /* Transmit Service Match Register */ |
| 14 | #define CD180_RSMR 0x63 /* Receive Service Match Register */ |
| 15 | #define CD180_GSVR 0x40 /* Global Service Vector Register */ |
| 16 | #define CD180_SRSR 0x65 /* Service Request Status Register */ |
| 17 | #define CD180_GSCR 0x41 /* Global Service Channel Register */ |
| 18 | #define CD180_CAR 0x64 /* Channel Access Register */ |
| 19 | |
| 20 | /* Indexed registers */ |
| 21 | #define CD180_RDCR 0x07 /* Receive Data Count Register */ |
| 22 | #define CD180_RDR 0x78 /* Receiver Data Register */ |
| 23 | #define CD180_RCSR 0x7a /* Receiver Character Status Register */ |
| 24 | #define CD180_TDR 0x7b /* Transmit Data Register */ |
| 25 | #define CD180_EOSRR 0x7f /* End of Service Request Register */ |
| 26 | |
| 27 | /* Channel Registers */ |
| 28 | #define CD180_SRER 0x02 /* Service Request Enable Register */ |
| 29 | #define CD180_CCR 0x01 /* Channel Command Register */ |
| 30 | #define CD180_COR1 0x03 /* Channel Option Register 1 */ |
| 31 | #define CD180_COR2 0x04 /* Channel Option Register 2 */ |
| 32 | #define CD180_COR3 0x05 /* Channel Option Register 3 */ |
| 33 | #define CD180_CCSR 0x06 /* Channel Control Status Register */ |
| 34 | #define CD180_RTPR 0x18 /* Receive Timeout Period Register */ |
| 35 | #define CD180_RBPRH 0x31 /* Receive Bit Rate Period Register High */ |
| 36 | #define CD180_RBPRL 0x32 /* Receive Bit Rate Period Register Low */ |
| 37 | #define CD180_TBPRH 0x39 /* Transmit Bit Rate Period Register High */ |
| 38 | #define CD180_TBPRL 0x3a /* Transmit Bit Rate Period Register Low */ |
| 39 | #define CD180_SCHR1 0x09 /* Special Character Register 1 */ |
| 40 | #define CD180_SCHR2 0x0a /* Special Character Register 2 */ |
| 41 | #define CD180_SCHR3 0x0b /* Special Character Register 3 */ |
| 42 | #define CD180_SCHR4 0x0c /* Special Character Register 4 */ |
| 43 | #define CD180_MCR 0x12 /* Modem Change Register */ |
| 44 | #define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */ |
| 45 | #define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */ |
| 46 | #define CD180_MSVR 0x28 /* Modem Signal Value Register */ |
| 47 | #define CD180_MSVRTS 0x29 /* Modem Signal Value RTS */ |
| 48 | #define CD180_MSVDTR 0x2a /* Modem Signal Value DTR */ |
| 49 | |
| 50 | /* Global Interrupt Vector Register (R/W) */ |
| 51 | |
| 52 | #define GSVR_ITMASK 0x07 /* Interrupt type mask */ |
| 53 | #define GSVR_IT_MDM 0x01 /* Modem Signal Change Interrupt */ |
| 54 | #define GSVR_IT_TX 0x02 /* Transmit Data Interrupt */ |
| 55 | #define GSVR_IT_RGD 0x03 /* Receive Good Data Interrupt */ |
| 56 | #define GSVR_IT_REXC 0x07 /* Receive Exception Interrupt */ |
| 57 | |
| 58 | |
| 59 | /* Global Interrupt Channel Register (R/W) */ |
| 60 | |
| 61 | #define GSCR_CHAN 0x1c /* Channel Number Mask */ |
| 62 | #define GSCR_CHAN_OFF 2 /* Channel Number Offset */ |
| 63 | |
| 64 | |
| 65 | /* Channel Address Register (R/W) */ |
| 66 | |
| 67 | #define CAR_CHAN 0x07 /* Channel Number Mask */ |
| 68 | |
| 69 | |
| 70 | /* Receive Character Status Register (R/O) */ |
| 71 | |
| 72 | #define RCSR_TOUT 0x80 /* Rx Timeout */ |
| 73 | #define RCSR_SCDET 0x70 /* Special Character Detected Mask */ |
| 74 | #define RCSR_NO_SC 0x00 /* No Special Characters Detected */ |
| 75 | #define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ |
| 76 | #define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */ |
| 77 | #define RCSR_SC_3 0x30 /* Special Char 3 Detected */ |
| 78 | #define RCSR_SC_4 0x40 /* Special Char 4 Detected */ |
| 79 | #define RCSR_BREAK 0x08 /* Break has been detected */ |
| 80 | #define RCSR_PE 0x04 /* Parity Error */ |
| 81 | #define RCSR_FE 0x02 /* Frame Error */ |
| 82 | #define RCSR_OE 0x01 /* Overrun Error */ |
| 83 | |
| 84 | |
| 85 | /* Channel Command Register (R/W) (commands in groups can be OR-ed) */ |
| 86 | |
| 87 | #define CCR_HARDRESET 0x81 /* Reset the chip */ |
| 88 | |
| 89 | #define CCR_SOFTRESET 0x80 /* Soft Channel Reset */ |
| 90 | |
| 91 | #define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */ |
| 92 | #define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */ |
| 93 | #define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */ |
| 94 | |
| 95 | #define CCR_SSCH1 0x21 /* Send Special Character 1 */ |
| 96 | |
| 97 | #define CCR_SSCH2 0x22 /* Send Special Character 2 */ |
| 98 | |
| 99 | #define CCR_SSCH3 0x23 /* Send Special Character 3 */ |
| 100 | |
| 101 | #define CCR_SSCH4 0x24 /* Send Special Character 4 */ |
| 102 | |
| 103 | #define CCR_TXEN 0x18 /* Enable Transmitter */ |
| 104 | #define CCR_RXEN 0x12 /* Enable Receiver */ |
| 105 | |
| 106 | #define CCR_TXDIS 0x14 /* Disable Transmitter */ |
| 107 | #define CCR_RXDIS 0x11 /* Disable Receiver */ |
| 108 | |
| 109 | |
| 110 | /* Service Request Enable Register (R/W) */ |
| 111 | |
| 112 | #define SRER_DSR 0x80 /* Enable interrupt on DSR change */ |
| 113 | #define SRER_CD 0x40 /* Enable interrupt on CD change */ |
| 114 | #define SRER_CTS 0x20 /* Enable interrupt on CTS change */ |
| 115 | #define SRER_RXD 0x10 /* Enable interrupt on Receive Data */ |
| 116 | #define SRER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */ |
| 117 | #define SRER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */ |
| 118 | #define SRER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */ |
| 119 | #define SRER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */ |
| 120 | |
| 121 | |
| 122 | /* Channel Option Register 1 (R/W) */ |
| 123 | |
| 124 | #define COR1_ODDP 0x80 /* Odd Parity */ |
| 125 | #define COR1_PARMODE 0x60 /* Parity Mode mask */ |
| 126 | #define COR1_NOPAR 0x00 /* No Parity */ |
| 127 | #define COR1_FORCEPAR 0x20 /* Force Parity */ |
| 128 | #define COR1_NORMPAR 0x40 /* Normal Parity */ |
| 129 | #define COR1_IGNORE 0x10 /* Ignore Parity on RX */ |
| 130 | #define COR1_STOPBITS 0x0c /* Number of Stop Bits */ |
| 131 | #define COR1_1SB 0x00 /* 1 Stop Bit */ |
| 132 | #define COR1_15SB 0x04 /* 1.5 Stop Bits */ |
| 133 | #define COR1_2SB 0x08 /* 2 Stop Bits */ |
| 134 | #define COR1_CHARLEN 0x03 /* Character Length */ |
| 135 | #define COR1_5BITS 0x00 /* 5 bits */ |
| 136 | #define COR1_6BITS 0x01 /* 6 bits */ |
| 137 | #define COR1_7BITS 0x02 /* 7 bits */ |
| 138 | #define COR1_8BITS 0x03 /* 8 bits */ |
| 139 | |
| 140 | |
| 141 | /* Channel Option Register 2 (R/W) */ |
| 142 | |
| 143 | #define COR2_IXM 0x80 /* Implied XON mode */ |
| 144 | #define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */ |
| 145 | #define COR2_ETC 0x20 /* Embedded Tx Commands Enable */ |
| 146 | #define COR2_LLM 0x10 /* Local Loopback Mode */ |
| 147 | #define COR2_RLM 0x08 /* Remote Loopback Mode */ |
| 148 | #define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */ |
| 149 | #define COR2_CTSAE 0x02 /* CTS Automatic Enable */ |
| 150 | #define COR2_DSRAE 0x01 /* DSR Automatic Enable */ |
| 151 | |
| 152 | |
| 153 | /* Channel Option Register 3 (R/W) */ |
| 154 | |
| 155 | #define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */ |
| 156 | #define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */ |
| 157 | #define COR3_FCT 0x20 /* Flow-Control Transparency Mode */ |
| 158 | #define COR3_SCDE 0x10 /* Special Character Detection Enable */ |
| 159 | #define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */ |
| 160 | |
| 161 | |
| 162 | /* Channel Control Status Register (R/O) */ |
| 163 | |
| 164 | #define CCSR_RXEN 0x80 /* Receiver Enabled */ |
| 165 | #define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */ |
| 166 | #define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */ |
| 167 | #define CCSR_TXEN 0x08 /* Transmitter Enabled */ |
| 168 | #define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */ |
| 169 | #define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */ |
| 170 | |
| 171 | |
| 172 | /* Modem Change Option Register 1 (R/W) */ |
| 173 | |
| 174 | #define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */ |
| 175 | #define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */ |
| 176 | #define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */ |
| 177 | #define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */ |
| 178 | #define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */ |
| 179 | |
| 180 | |
| 181 | /* Modem Change Option Register 2 (R/W) */ |
| 182 | |
| 183 | #define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */ |
| 184 | #define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */ |
| 185 | #define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */ |
| 186 | |
| 187 | |
| 188 | /* Modem Change Register (R/W) */ |
| 189 | |
| 190 | #define MCR_DSRCHG 0x80 /* DSR Changed */ |
| 191 | #define MCR_CDCHG 0x40 /* CD Changed */ |
| 192 | #define MCR_CTSCHG 0x20 /* CTS Changed */ |
| 193 | |
| 194 | |
| 195 | /* Modem Signal Value Register (R/W) */ |
| 196 | |
| 197 | #define MSVR_DSR 0x80 /* Current state of DSR input */ |
| 198 | #define MSVR_CD 0x40 /* Current state of CD input */ |
| 199 | #define MSVR_CTS 0x20 /* Current state of CTS input */ |
| 200 | #define MSVR_DTR 0x02 /* Current state of DTR output */ |
| 201 | #define MSVR_RTS 0x01 /* Current state of RTS output */ |
| 202 | |
| 203 | |
| 204 | /* Service Request Status Register */ |
| 205 | |
| 206 | #define SRSR_CMASK 0xC0 /* Current Service Context Mask */ |
| 207 | #define SRSR_CNONE 0x00 /* Not in a service context */ |
| 208 | #define SRSR_CRX 0x40 /* Rx Context */ |
| 209 | #define SRSR_CTX 0x80 /* Tx Context */ |
| 210 | #define SRSR_CMDM 0xC0 /* Modem Context */ |
| 211 | #define SRSR_ANYINT 0x6F /* Any interrupt flag */ |
| 212 | #define SRSR_RINT 0x10 /* Receive Interrupt */ |
| 213 | #define SRSR_TINT 0x04 /* Transmit Interrupt */ |
| 214 | #define SRSR_MINT 0x01 /* Modem Interrupt */ |
| 215 | #define SRSR_REXT 0x20 /* Receive External Interrupt */ |
| 216 | #define SRSR_TEXT 0x08 /* Transmit External Interrupt */ |
| 217 | #define SRSR_MEXT 0x02 /* Modem External Interrupt */ |
| 218 | |
| 219 | |
| 220 | /* Service Request Configuration Register */ |
| 221 | |
| 222 | #define SRCR_PKGTYPE 0x80 |
| 223 | #define SRCR_REGACKEN 0x40 |
| 224 | #define SRCR_DAISYEN 0x20 |
| 225 | #define SRCR_GLOBPRI 0x10 |
| 226 | #define SRCR_UNFAIR 0x08 |
| 227 | #define SRCR_AUTOPRI 0x02 |
| 228 | #define SRCR_PRISEL 0x01 |
| 229 | |
| 230 | /* Values for register-based Interrupt ACKs */ |
| 231 | #define CD180_ACK_MINT 0x75 /* goes to MSMR */ |
| 232 | #define CD180_ACK_TINT 0x76 /* goes to TSMR */ |
| 233 | #define CD180_ACK_RINT 0x77 /* goes to RSMR */ |
| 234 | |
| 235 | /* Escape characters */ |
| 236 | |
| 237 | #define CD180_C_ESC 0x00 /* Escape character */ |
| 238 | #define CD180_C_SBRK 0x81 /* Start sending BREAK */ |
| 239 | #define CD180_C_DELAY 0x82 /* Delay output */ |
| 240 | #define CD180_C_EBRK 0x83 /* Stop sending BREAK */ |