Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1 | /* |
| 2 | * drivers/spi/spi_imx.c |
| 3 | * |
| 4 | * Copyright (C) 2006 SWAPP |
| 5 | * Andrea Paterniani <a.paterniani@swapp-eng.it> |
| 6 | * |
| 7 | * Initial version inspired by: |
| 8 | * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License as published by |
| 12 | * the Free Software Foundation; either version 2 of the License, or |
| 13 | * (at your option) any later version. |
| 14 | * |
| 15 | * This program is distributed in the hope that it will be useful, |
| 16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 | * GNU General Public License for more details. |
| 19 | */ |
| 20 | |
| 21 | #include <linux/init.h> |
| 22 | #include <linux/module.h> |
| 23 | #include <linux/device.h> |
| 24 | #include <linux/ioport.h> |
| 25 | #include <linux/errno.h> |
| 26 | #include <linux/interrupt.h> |
| 27 | #include <linux/platform_device.h> |
| 28 | #include <linux/dma-mapping.h> |
| 29 | #include <linux/spi/spi.h> |
| 30 | #include <linux/workqueue.h> |
| 31 | #include <linux/delay.h> |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 32 | #include <linux/clk.h> |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 33 | |
| 34 | #include <asm/io.h> |
| 35 | #include <asm/irq.h> |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 36 | #include <asm/delay.h> |
| 37 | |
Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 38 | #include <mach/hardware.h> |
| 39 | #include <mach/imx-dma.h> |
| 40 | #include <mach/spi_imx.h> |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 41 | |
| 42 | /*-------------------------------------------------------------------------*/ |
| 43 | /* SPI Registers offsets from peripheral base address */ |
| 44 | #define SPI_RXDATA (0x00) |
| 45 | #define SPI_TXDATA (0x04) |
| 46 | #define SPI_CONTROL (0x08) |
| 47 | #define SPI_INT_STATUS (0x0C) |
| 48 | #define SPI_TEST (0x10) |
| 49 | #define SPI_PERIOD (0x14) |
| 50 | #define SPI_DMA (0x18) |
| 51 | #define SPI_RESET (0x1C) |
| 52 | |
| 53 | /* SPI Control Register Bit Fields & Masks */ |
| 54 | #define SPI_CONTROL_BITCOUNT_MASK (0xF) /* Bit Count Mask */ |
| 55 | #define SPI_CONTROL_BITCOUNT(n) (((n) - 1) & SPI_CONTROL_BITCOUNT_MASK) |
| 56 | #define SPI_CONTROL_POL (0x1 << 4) /* Clock Polarity Mask */ |
| 57 | #define SPI_CONTROL_POL_ACT_HIGH (0x0 << 4) /* Active high pol. (0=idle) */ |
| 58 | #define SPI_CONTROL_POL_ACT_LOW (0x1 << 4) /* Active low pol. (1=idle) */ |
| 59 | #define SPI_CONTROL_PHA (0x1 << 5) /* Clock Phase Mask */ |
| 60 | #define SPI_CONTROL_PHA_0 (0x0 << 5) /* Clock Phase 0 */ |
| 61 | #define SPI_CONTROL_PHA_1 (0x1 << 5) /* Clock Phase 1 */ |
| 62 | #define SPI_CONTROL_SSCTL (0x1 << 6) /* /SS Waveform Select Mask */ |
| 63 | #define SPI_CONTROL_SSCTL_0 (0x0 << 6) /* Master: /SS stays low between SPI burst |
| 64 | Slave: RXFIFO advanced by BIT_COUNT */ |
| 65 | #define SPI_CONTROL_SSCTL_1 (0x1 << 6) /* Master: /SS insert pulse between SPI burst |
| 66 | Slave: RXFIFO advanced by /SS rising edge */ |
| 67 | #define SPI_CONTROL_SSPOL (0x1 << 7) /* /SS Polarity Select Mask */ |
| 68 | #define SPI_CONTROL_SSPOL_ACT_LOW (0x0 << 7) /* /SS Active low */ |
| 69 | #define SPI_CONTROL_SSPOL_ACT_HIGH (0x1 << 7) /* /SS Active high */ |
| 70 | #define SPI_CONTROL_XCH (0x1 << 8) /* Exchange */ |
| 71 | #define SPI_CONTROL_SPIEN (0x1 << 9) /* SPI Module Enable */ |
| 72 | #define SPI_CONTROL_MODE (0x1 << 10) /* SPI Mode Select Mask */ |
| 73 | #define SPI_CONTROL_MODE_SLAVE (0x0 << 10) /* SPI Mode Slave */ |
| 74 | #define SPI_CONTROL_MODE_MASTER (0x1 << 10) /* SPI Mode Master */ |
| 75 | #define SPI_CONTROL_DRCTL (0x3 << 11) /* /SPI_RDY Control Mask */ |
| 76 | #define SPI_CONTROL_DRCTL_0 (0x0 << 11) /* Ignore /SPI_RDY */ |
| 77 | #define SPI_CONTROL_DRCTL_1 (0x1 << 11) /* /SPI_RDY falling edge triggers input */ |
| 78 | #define SPI_CONTROL_DRCTL_2 (0x2 << 11) /* /SPI_RDY active low level triggers input */ |
| 79 | #define SPI_CONTROL_DATARATE (0x7 << 13) /* Data Rate Mask */ |
| 80 | #define SPI_PERCLK2_DIV_MIN (0) /* PERCLK2:4 */ |
| 81 | #define SPI_PERCLK2_DIV_MAX (7) /* PERCLK2:512 */ |
| 82 | #define SPI_CONTROL_DATARATE_MIN (SPI_PERCLK2_DIV_MAX << 13) |
| 83 | #define SPI_CONTROL_DATARATE_MAX (SPI_PERCLK2_DIV_MIN << 13) |
| 84 | #define SPI_CONTROL_DATARATE_BAD (SPI_CONTROL_DATARATE_MIN + 1) |
| 85 | |
| 86 | /* SPI Interrupt/Status Register Bit Fields & Masks */ |
| 87 | #define SPI_STATUS_TE (0x1 << 0) /* TXFIFO Empty Status */ |
| 88 | #define SPI_STATUS_TH (0x1 << 1) /* TXFIFO Half Status */ |
| 89 | #define SPI_STATUS_TF (0x1 << 2) /* TXFIFO Full Status */ |
| 90 | #define SPI_STATUS_RR (0x1 << 3) /* RXFIFO Data Ready Status */ |
| 91 | #define SPI_STATUS_RH (0x1 << 4) /* RXFIFO Half Status */ |
| 92 | #define SPI_STATUS_RF (0x1 << 5) /* RXFIFO Full Status */ |
| 93 | #define SPI_STATUS_RO (0x1 << 6) /* RXFIFO Overflow */ |
| 94 | #define SPI_STATUS_BO (0x1 << 7) /* Bit Count Overflow */ |
| 95 | #define SPI_STATUS (0xFF) /* SPI Status Mask */ |
| 96 | #define SPI_INTEN_TE (0x1 << 8) /* TXFIFO Empty Interrupt Enable */ |
| 97 | #define SPI_INTEN_TH (0x1 << 9) /* TXFIFO Half Interrupt Enable */ |
| 98 | #define SPI_INTEN_TF (0x1 << 10) /* TXFIFO Full Interrupt Enable */ |
| 99 | #define SPI_INTEN_RE (0x1 << 11) /* RXFIFO Data Ready Interrupt Enable */ |
| 100 | #define SPI_INTEN_RH (0x1 << 12) /* RXFIFO Half Interrupt Enable */ |
| 101 | #define SPI_INTEN_RF (0x1 << 13) /* RXFIFO Full Interrupt Enable */ |
| 102 | #define SPI_INTEN_RO (0x1 << 14) /* RXFIFO Overflow Interrupt Enable */ |
| 103 | #define SPI_INTEN_BO (0x1 << 15) /* Bit Count Overflow Interrupt Enable */ |
| 104 | #define SPI_INTEN (0xFF << 8) /* SPI Interrupt Enable Mask */ |
| 105 | |
| 106 | /* SPI Test Register Bit Fields & Masks */ |
| 107 | #define SPI_TEST_TXCNT (0xF << 0) /* TXFIFO Counter */ |
| 108 | #define SPI_TEST_RXCNT_LSB (4) /* RXFIFO Counter LSB */ |
| 109 | #define SPI_TEST_RXCNT (0xF << 4) /* RXFIFO Counter */ |
| 110 | #define SPI_TEST_SSTATUS (0xF << 8) /* State Machine Status */ |
| 111 | #define SPI_TEST_LBC (0x1 << 14) /* Loop Back Control */ |
| 112 | |
| 113 | /* SPI Period Register Bit Fields & Masks */ |
| 114 | #define SPI_PERIOD_WAIT (0x7FFF << 0) /* Wait Between Transactions */ |
| 115 | #define SPI_PERIOD_MAX_WAIT (0x7FFF) /* Max Wait Between |
| 116 | Transactions */ |
| 117 | #define SPI_PERIOD_CSRC (0x1 << 15) /* Period Clock Source Mask */ |
| 118 | #define SPI_PERIOD_CSRC_BCLK (0x0 << 15) /* Period Clock Source is |
| 119 | Bit Clock */ |
| 120 | #define SPI_PERIOD_CSRC_32768 (0x1 << 15) /* Period Clock Source is |
| 121 | 32.768 KHz Clock */ |
| 122 | |
| 123 | /* SPI DMA Register Bit Fields & Masks */ |
Andrea Paterniani | ac140a8 | 2007-06-01 00:47:07 -0700 | [diff] [blame] | 124 | #define SPI_DMA_RHDMA (0x1 << 4) /* RXFIFO Half Status */ |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 125 | #define SPI_DMA_RFDMA (0x1 << 5) /* RXFIFO Full Status */ |
| 126 | #define SPI_DMA_TEDMA (0x1 << 6) /* TXFIFO Empty Status */ |
| 127 | #define SPI_DMA_THDMA (0x1 << 7) /* TXFIFO Half Status */ |
| 128 | #define SPI_DMA_RHDEN (0x1 << 12) /* RXFIFO Half DMA Request Enable */ |
| 129 | #define SPI_DMA_RFDEN (0x1 << 13) /* RXFIFO Full DMA Request Enable */ |
| 130 | #define SPI_DMA_TEDEN (0x1 << 14) /* TXFIFO Empty DMA Request Enable */ |
| 131 | #define SPI_DMA_THDEN (0x1 << 15) /* TXFIFO Half DMA Request Enable */ |
| 132 | |
| 133 | /* SPI Soft Reset Register Bit Fields & Masks */ |
| 134 | #define SPI_RESET_START (0x1) /* Start */ |
| 135 | |
| 136 | /* Default SPI configuration values */ |
| 137 | #define SPI_DEFAULT_CONTROL \ |
| 138 | ( \ |
| 139 | SPI_CONTROL_BITCOUNT(16) | \ |
| 140 | SPI_CONTROL_POL_ACT_HIGH | \ |
| 141 | SPI_CONTROL_PHA_0 | \ |
| 142 | SPI_CONTROL_SPIEN | \ |
| 143 | SPI_CONTROL_SSCTL_1 | \ |
| 144 | SPI_CONTROL_MODE_MASTER | \ |
| 145 | SPI_CONTROL_DRCTL_0 | \ |
| 146 | SPI_CONTROL_DATARATE_MIN \ |
| 147 | ) |
| 148 | #define SPI_DEFAULT_ENABLE_LOOPBACK (0) |
| 149 | #define SPI_DEFAULT_ENABLE_DMA (0) |
| 150 | #define SPI_DEFAULT_PERIOD_WAIT (8) |
| 151 | /*-------------------------------------------------------------------------*/ |
| 152 | |
| 153 | |
| 154 | /*-------------------------------------------------------------------------*/ |
| 155 | /* TX/RX SPI FIFO size */ |
| 156 | #define SPI_FIFO_DEPTH (8) |
| 157 | #define SPI_FIFO_BYTE_WIDTH (2) |
| 158 | #define SPI_FIFO_OVERFLOW_MARGIN (2) |
| 159 | |
Paulius Zaleckas | efad798b | 2008-02-03 15:42:53 +0200 | [diff] [blame] | 160 | /* DMA burst length for half full/empty request trigger */ |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 161 | #define SPI_DMA_BLR (SPI_FIFO_DEPTH * SPI_FIFO_BYTE_WIDTH / 2) |
| 162 | |
| 163 | /* Dummy char output to achieve reads. |
| 164 | Choosing something different from all zeroes may help pattern recogition |
| 165 | for oscilloscope analysis, but may break some drivers. */ |
| 166 | #define SPI_DUMMY_u8 0 |
| 167 | #define SPI_DUMMY_u16 ((SPI_DUMMY_u8 << 8) | SPI_DUMMY_u8) |
| 168 | #define SPI_DUMMY_u32 ((SPI_DUMMY_u16 << 16) | SPI_DUMMY_u16) |
| 169 | |
| 170 | /** |
| 171 | * Macro to change a u32 field: |
| 172 | * @r : register to edit |
| 173 | * @m : bit mask |
| 174 | * @v : new value for the field correctly bit-alligned |
| 175 | */ |
| 176 | #define u32_EDIT(r, m, v) r = (r & ~(m)) | (v) |
| 177 | |
| 178 | /* Message state */ |
| 179 | #define START_STATE ((void*)0) |
| 180 | #define RUNNING_STATE ((void*)1) |
| 181 | #define DONE_STATE ((void*)2) |
| 182 | #define ERROR_STATE ((void*)-1) |
| 183 | |
| 184 | /* Queue state */ |
| 185 | #define QUEUE_RUNNING (0) |
| 186 | #define QUEUE_STOPPED (1) |
| 187 | |
| 188 | #define IS_DMA_ALIGNED(x) (((u32)(x) & 0x03) == 0) |
| 189 | /*-------------------------------------------------------------------------*/ |
| 190 | |
| 191 | |
| 192 | /*-------------------------------------------------------------------------*/ |
| 193 | /* Driver data structs */ |
| 194 | |
| 195 | /* Context */ |
| 196 | struct driver_data { |
| 197 | /* Driver model hookup */ |
| 198 | struct platform_device *pdev; |
| 199 | |
| 200 | /* SPI framework hookup */ |
| 201 | struct spi_master *master; |
| 202 | |
| 203 | /* IMX hookup */ |
| 204 | struct spi_imx_master *master_info; |
| 205 | |
| 206 | /* Memory resources and SPI regs virtual address */ |
| 207 | struct resource *ioarea; |
| 208 | void __iomem *regs; |
| 209 | |
| 210 | /* SPI RX_DATA physical address */ |
| 211 | dma_addr_t rd_data_phys; |
| 212 | |
| 213 | /* Driver message queue */ |
| 214 | struct workqueue_struct *workqueue; |
| 215 | struct work_struct work; |
| 216 | spinlock_t lock; |
| 217 | struct list_head queue; |
| 218 | int busy; |
| 219 | int run; |
| 220 | |
| 221 | /* Message Transfer pump */ |
| 222 | struct tasklet_struct pump_transfers; |
| 223 | |
| 224 | /* Current message, transfer and state */ |
| 225 | struct spi_message *cur_msg; |
| 226 | struct spi_transfer *cur_transfer; |
| 227 | struct chip_data *cur_chip; |
| 228 | |
| 229 | /* Rd / Wr buffers pointers */ |
| 230 | size_t len; |
| 231 | void *tx; |
| 232 | void *tx_end; |
| 233 | void *rx; |
| 234 | void *rx_end; |
| 235 | |
| 236 | u8 rd_only; |
| 237 | u8 n_bytes; |
| 238 | int cs_change; |
| 239 | |
| 240 | /* Function pointers */ |
| 241 | irqreturn_t (*transfer_handler)(struct driver_data *drv_data); |
| 242 | void (*cs_control)(u32 command); |
| 243 | |
| 244 | /* DMA setup */ |
| 245 | int rx_channel; |
| 246 | int tx_channel; |
| 247 | dma_addr_t rx_dma; |
| 248 | dma_addr_t tx_dma; |
| 249 | int rx_dma_needs_unmap; |
| 250 | int tx_dma_needs_unmap; |
| 251 | size_t tx_map_len; |
| 252 | u32 dummy_dma_buf ____cacheline_aligned; |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 253 | |
| 254 | struct clk *clk; |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 255 | }; |
| 256 | |
| 257 | /* Runtime state */ |
| 258 | struct chip_data { |
| 259 | u32 control; |
| 260 | u32 period; |
| 261 | u32 test; |
| 262 | |
| 263 | u8 enable_dma:1; |
| 264 | u8 bits_per_word; |
| 265 | u8 n_bytes; |
| 266 | u32 max_speed_hz; |
| 267 | |
| 268 | void (*cs_control)(u32 command); |
| 269 | }; |
| 270 | /*-------------------------------------------------------------------------*/ |
| 271 | |
| 272 | |
| 273 | static void pump_messages(struct work_struct *work); |
| 274 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 275 | static void flush(struct driver_data *drv_data) |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 276 | { |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 277 | void __iomem *regs = drv_data->regs; |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 278 | u32 control; |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 279 | |
| 280 | dev_dbg(&drv_data->pdev->dev, "flush\n"); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 281 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 282 | /* Wait for end of transaction */ |
| 283 | do { |
| 284 | control = readl(regs + SPI_CONTROL); |
| 285 | } while (control & SPI_CONTROL_XCH); |
| 286 | |
| 287 | /* Release chip select if requested, transfer delays are |
| 288 | handled in pump_transfers */ |
| 289 | if (drv_data->cs_change) |
| 290 | drv_data->cs_control(SPI_CS_DEASSERT); |
| 291 | |
| 292 | /* Disable SPI to flush FIFOs */ |
| 293 | writel(control & ~SPI_CONTROL_SPIEN, regs + SPI_CONTROL); |
| 294 | writel(control, regs + SPI_CONTROL); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 295 | } |
| 296 | |
| 297 | static void restore_state(struct driver_data *drv_data) |
| 298 | { |
| 299 | void __iomem *regs = drv_data->regs; |
| 300 | struct chip_data *chip = drv_data->cur_chip; |
| 301 | |
| 302 | /* Load chip registers */ |
| 303 | dev_dbg(&drv_data->pdev->dev, |
| 304 | "restore_state\n" |
| 305 | " test = 0x%08X\n" |
| 306 | " control = 0x%08X\n", |
| 307 | chip->test, |
| 308 | chip->control); |
| 309 | writel(chip->test, regs + SPI_TEST); |
| 310 | writel(chip->period, regs + SPI_PERIOD); |
| 311 | writel(0, regs + SPI_INT_STATUS); |
| 312 | writel(chip->control, regs + SPI_CONTROL); |
| 313 | } |
| 314 | |
| 315 | static void null_cs_control(u32 command) |
| 316 | { |
| 317 | } |
| 318 | |
| 319 | static inline u32 data_to_write(struct driver_data *drv_data) |
| 320 | { |
| 321 | return ((u32)(drv_data->tx_end - drv_data->tx)) / drv_data->n_bytes; |
| 322 | } |
| 323 | |
| 324 | static inline u32 data_to_read(struct driver_data *drv_data) |
| 325 | { |
| 326 | return ((u32)(drv_data->rx_end - drv_data->rx)) / drv_data->n_bytes; |
| 327 | } |
| 328 | |
| 329 | static int write(struct driver_data *drv_data) |
| 330 | { |
| 331 | void __iomem *regs = drv_data->regs; |
| 332 | void *tx = drv_data->tx; |
| 333 | void *tx_end = drv_data->tx_end; |
| 334 | u8 n_bytes = drv_data->n_bytes; |
| 335 | u32 remaining_writes; |
| 336 | u32 fifo_avail_space; |
| 337 | u32 n; |
| 338 | u16 d; |
| 339 | |
| 340 | /* Compute how many fifo writes to do */ |
| 341 | remaining_writes = (u32)(tx_end - tx) / n_bytes; |
| 342 | fifo_avail_space = SPI_FIFO_DEPTH - |
| 343 | (readl(regs + SPI_TEST) & SPI_TEST_TXCNT); |
| 344 | if (drv_data->rx && (fifo_avail_space > SPI_FIFO_OVERFLOW_MARGIN)) |
| 345 | /* Fix misunderstood receive overflow */ |
| 346 | fifo_avail_space -= SPI_FIFO_OVERFLOW_MARGIN; |
| 347 | n = min(remaining_writes, fifo_avail_space); |
| 348 | |
| 349 | dev_dbg(&drv_data->pdev->dev, |
| 350 | "write type %s\n" |
| 351 | " remaining writes = %d\n" |
| 352 | " fifo avail space = %d\n" |
| 353 | " fifo writes = %d\n", |
| 354 | (n_bytes == 1) ? "u8" : "u16", |
| 355 | remaining_writes, |
| 356 | fifo_avail_space, |
| 357 | n); |
| 358 | |
| 359 | if (n > 0) { |
| 360 | /* Fill SPI TXFIFO */ |
| 361 | if (drv_data->rd_only) { |
| 362 | tx += n * n_bytes; |
| 363 | while (n--) |
| 364 | writel(SPI_DUMMY_u16, regs + SPI_TXDATA); |
| 365 | } else { |
| 366 | if (n_bytes == 1) { |
| 367 | while (n--) { |
| 368 | d = *(u8*)tx; |
| 369 | writel(d, regs + SPI_TXDATA); |
| 370 | tx += 1; |
| 371 | } |
| 372 | } else { |
| 373 | while (n--) { |
| 374 | d = *(u16*)tx; |
| 375 | writel(d, regs + SPI_TXDATA); |
| 376 | tx += 2; |
| 377 | } |
| 378 | } |
| 379 | } |
| 380 | |
| 381 | /* Trigger transfer */ |
| 382 | writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH, |
| 383 | regs + SPI_CONTROL); |
| 384 | |
| 385 | /* Update tx pointer */ |
| 386 | drv_data->tx = tx; |
| 387 | } |
| 388 | |
| 389 | return (tx >= tx_end); |
| 390 | } |
| 391 | |
| 392 | static int read(struct driver_data *drv_data) |
| 393 | { |
| 394 | void __iomem *regs = drv_data->regs; |
| 395 | void *rx = drv_data->rx; |
| 396 | void *rx_end = drv_data->rx_end; |
| 397 | u8 n_bytes = drv_data->n_bytes; |
| 398 | u32 remaining_reads; |
| 399 | u32 fifo_rxcnt; |
| 400 | u32 n; |
| 401 | u16 d; |
| 402 | |
| 403 | /* Compute how many fifo reads to do */ |
| 404 | remaining_reads = (u32)(rx_end - rx) / n_bytes; |
| 405 | fifo_rxcnt = (readl(regs + SPI_TEST) & SPI_TEST_RXCNT) >> |
| 406 | SPI_TEST_RXCNT_LSB; |
| 407 | n = min(remaining_reads, fifo_rxcnt); |
| 408 | |
| 409 | dev_dbg(&drv_data->pdev->dev, |
| 410 | "read type %s\n" |
| 411 | " remaining reads = %d\n" |
| 412 | " fifo rx count = %d\n" |
| 413 | " fifo reads = %d\n", |
| 414 | (n_bytes == 1) ? "u8" : "u16", |
| 415 | remaining_reads, |
| 416 | fifo_rxcnt, |
| 417 | n); |
| 418 | |
| 419 | if (n > 0) { |
| 420 | /* Read SPI RXFIFO */ |
| 421 | if (n_bytes == 1) { |
| 422 | while (n--) { |
| 423 | d = readl(regs + SPI_RXDATA); |
| 424 | *((u8*)rx) = d; |
| 425 | rx += 1; |
| 426 | } |
| 427 | } else { |
| 428 | while (n--) { |
| 429 | d = readl(regs + SPI_RXDATA); |
| 430 | *((u16*)rx) = d; |
| 431 | rx += 2; |
| 432 | } |
| 433 | } |
| 434 | |
| 435 | /* Update rx pointer */ |
| 436 | drv_data->rx = rx; |
| 437 | } |
| 438 | |
| 439 | return (rx >= rx_end); |
| 440 | } |
| 441 | |
| 442 | static void *next_transfer(struct driver_data *drv_data) |
| 443 | { |
| 444 | struct spi_message *msg = drv_data->cur_msg; |
| 445 | struct spi_transfer *trans = drv_data->cur_transfer; |
| 446 | |
| 447 | /* Move to next transfer */ |
| 448 | if (trans->transfer_list.next != &msg->transfers) { |
| 449 | drv_data->cur_transfer = |
| 450 | list_entry(trans->transfer_list.next, |
| 451 | struct spi_transfer, |
| 452 | transfer_list); |
| 453 | return RUNNING_STATE; |
| 454 | } |
| 455 | |
| 456 | return DONE_STATE; |
| 457 | } |
| 458 | |
| 459 | static int map_dma_buffers(struct driver_data *drv_data) |
| 460 | { |
| 461 | struct spi_message *msg; |
| 462 | struct device *dev; |
| 463 | void *buf; |
| 464 | |
| 465 | drv_data->rx_dma_needs_unmap = 0; |
| 466 | drv_data->tx_dma_needs_unmap = 0; |
| 467 | |
| 468 | if (!drv_data->master_info->enable_dma || |
| 469 | !drv_data->cur_chip->enable_dma) |
| 470 | return -1; |
| 471 | |
| 472 | msg = drv_data->cur_msg; |
| 473 | dev = &msg->spi->dev; |
| 474 | if (msg->is_dma_mapped) { |
| 475 | if (drv_data->tx_dma) |
| 476 | /* The caller provided at least dma and cpu virtual |
| 477 | address for write; pump_transfers() will consider the |
| 478 | transfer as write only if cpu rx virtual address is |
| 479 | NULL */ |
| 480 | return 0; |
| 481 | |
| 482 | if (drv_data->rx_dma) { |
| 483 | /* The caller provided dma and cpu virtual address to |
| 484 | performe read only transfer --> |
| 485 | use drv_data->dummy_dma_buf for dummy writes to |
| 486 | achive reads */ |
| 487 | buf = &drv_data->dummy_dma_buf; |
| 488 | drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf); |
| 489 | drv_data->tx_dma = dma_map_single(dev, |
| 490 | buf, |
| 491 | drv_data->tx_map_len, |
| 492 | DMA_TO_DEVICE); |
FUJITA Tomonori | 8d8bb39 | 2008-07-25 19:44:49 -0700 | [diff] [blame] | 493 | if (dma_mapping_error(dev, drv_data->tx_dma)) |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 494 | return -1; |
| 495 | |
| 496 | drv_data->tx_dma_needs_unmap = 1; |
| 497 | |
| 498 | /* Flags transfer as rd_only for pump_transfers() DMA |
| 499 | regs programming (should be redundant) */ |
| 500 | drv_data->tx = NULL; |
| 501 | |
| 502 | return 0; |
| 503 | } |
| 504 | } |
| 505 | |
| 506 | if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx)) |
| 507 | return -1; |
| 508 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 509 | if (drv_data->tx == NULL) { |
| 510 | /* Read only message --> use drv_data->dummy_dma_buf for dummy |
| 511 | writes to achive reads */ |
| 512 | buf = &drv_data->dummy_dma_buf; |
| 513 | drv_data->tx_map_len = sizeof(drv_data->dummy_dma_buf); |
| 514 | } else { |
| 515 | buf = drv_data->tx; |
| 516 | drv_data->tx_map_len = drv_data->len; |
| 517 | } |
| 518 | drv_data->tx_dma = dma_map_single(dev, |
| 519 | buf, |
| 520 | drv_data->tx_map_len, |
| 521 | DMA_TO_DEVICE); |
Andrea Paterniani | 3b45d63 | 2008-11-19 15:36:26 -0800 | [diff] [blame] | 522 | if (dma_mapping_error(dev, drv_data->tx_dma)) |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 523 | return -1; |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 524 | drv_data->tx_dma_needs_unmap = 1; |
| 525 | |
Andrea Paterniani | 3b45d63 | 2008-11-19 15:36:26 -0800 | [diff] [blame] | 526 | /* NULL rx means write-only transfer and no map needed |
| 527 | * since rx DMA will not be used */ |
| 528 | if (drv_data->rx) { |
| 529 | buf = drv_data->rx; |
| 530 | drv_data->rx_dma = dma_map_single(dev, |
| 531 | buf, |
| 532 | drv_data->len, |
| 533 | DMA_FROM_DEVICE); |
| 534 | if (dma_mapping_error(dev, drv_data->rx_dma)) { |
| 535 | if (drv_data->tx_dma) { |
| 536 | dma_unmap_single(dev, |
| 537 | drv_data->tx_dma, |
| 538 | drv_data->tx_map_len, |
| 539 | DMA_TO_DEVICE); |
| 540 | drv_data->tx_dma_needs_unmap = 0; |
| 541 | } |
| 542 | return -1; |
| 543 | } |
| 544 | drv_data->rx_dma_needs_unmap = 1; |
| 545 | } |
| 546 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 547 | return 0; |
| 548 | } |
| 549 | |
| 550 | static void unmap_dma_buffers(struct driver_data *drv_data) |
| 551 | { |
| 552 | struct spi_message *msg = drv_data->cur_msg; |
| 553 | struct device *dev = &msg->spi->dev; |
| 554 | |
| 555 | if (drv_data->rx_dma_needs_unmap) { |
| 556 | dma_unmap_single(dev, |
| 557 | drv_data->rx_dma, |
| 558 | drv_data->len, |
| 559 | DMA_FROM_DEVICE); |
| 560 | drv_data->rx_dma_needs_unmap = 0; |
| 561 | } |
| 562 | if (drv_data->tx_dma_needs_unmap) { |
| 563 | dma_unmap_single(dev, |
| 564 | drv_data->tx_dma, |
| 565 | drv_data->tx_map_len, |
| 566 | DMA_TO_DEVICE); |
| 567 | drv_data->tx_dma_needs_unmap = 0; |
| 568 | } |
| 569 | } |
| 570 | |
| 571 | /* Caller already set message->status (dma is already blocked) */ |
| 572 | static void giveback(struct spi_message *message, struct driver_data *drv_data) |
| 573 | { |
| 574 | void __iomem *regs = drv_data->regs; |
| 575 | |
| 576 | /* Bring SPI to sleep; restore_state() and pump_transfer() |
| 577 | will do new setup */ |
| 578 | writel(0, regs + SPI_INT_STATUS); |
| 579 | writel(0, regs + SPI_DMA); |
| 580 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 581 | /* Unconditioned deselct */ |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 582 | drv_data->cs_control(SPI_CS_DEASSERT); |
| 583 | |
| 584 | message->state = NULL; |
| 585 | if (message->complete) |
| 586 | message->complete(message->context); |
| 587 | |
| 588 | drv_data->cur_msg = NULL; |
| 589 | drv_data->cur_transfer = NULL; |
| 590 | drv_data->cur_chip = NULL; |
| 591 | queue_work(drv_data->workqueue, &drv_data->work); |
| 592 | } |
| 593 | |
| 594 | static void dma_err_handler(int channel, void *data, int errcode) |
| 595 | { |
| 596 | struct driver_data *drv_data = data; |
| 597 | struct spi_message *msg = drv_data->cur_msg; |
| 598 | |
| 599 | dev_dbg(&drv_data->pdev->dev, "dma_err_handler\n"); |
| 600 | |
| 601 | /* Disable both rx and tx dma channels */ |
| 602 | imx_dma_disable(drv_data->rx_channel); |
| 603 | imx_dma_disable(drv_data->tx_channel); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 604 | unmap_dma_buffers(drv_data); |
| 605 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 606 | flush(drv_data); |
| 607 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 608 | msg->state = ERROR_STATE; |
| 609 | tasklet_schedule(&drv_data->pump_transfers); |
| 610 | } |
| 611 | |
| 612 | static void dma_tx_handler(int channel, void *data) |
| 613 | { |
| 614 | struct driver_data *drv_data = data; |
| 615 | |
| 616 | dev_dbg(&drv_data->pdev->dev, "dma_tx_handler\n"); |
| 617 | |
| 618 | imx_dma_disable(channel); |
| 619 | |
| 620 | /* Now waits for TX FIFO empty */ |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 621 | writel(SPI_INTEN_TE, drv_data->regs + SPI_INT_STATUS); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 622 | } |
| 623 | |
| 624 | static irqreturn_t dma_transfer(struct driver_data *drv_data) |
| 625 | { |
| 626 | u32 status; |
| 627 | struct spi_message *msg = drv_data->cur_msg; |
| 628 | void __iomem *regs = drv_data->regs; |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 629 | |
| 630 | status = readl(regs + SPI_INT_STATUS); |
| 631 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 632 | if ((status & (SPI_INTEN_RO | SPI_STATUS_RO)) |
| 633 | == (SPI_INTEN_RO | SPI_STATUS_RO)) { |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 634 | writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS); |
| 635 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 636 | imx_dma_disable(drv_data->tx_channel); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 637 | imx_dma_disable(drv_data->rx_channel); |
| 638 | unmap_dma_buffers(drv_data); |
| 639 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 640 | flush(drv_data); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 641 | |
| 642 | dev_warn(&drv_data->pdev->dev, |
| 643 | "dma_transfer - fifo overun\n"); |
| 644 | |
| 645 | msg->state = ERROR_STATE; |
| 646 | tasklet_schedule(&drv_data->pump_transfers); |
| 647 | |
| 648 | return IRQ_HANDLED; |
| 649 | } |
| 650 | |
| 651 | if (status & SPI_STATUS_TE) { |
| 652 | writel(status & ~SPI_INTEN_TE, regs + SPI_INT_STATUS); |
| 653 | |
| 654 | if (drv_data->rx) { |
| 655 | /* Wait end of transfer before read trailing data */ |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 656 | while (readl(regs + SPI_CONTROL) & SPI_CONTROL_XCH) |
| 657 | cpu_relax(); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 658 | |
| 659 | imx_dma_disable(drv_data->rx_channel); |
| 660 | unmap_dma_buffers(drv_data); |
| 661 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 662 | /* Release chip select if requested, transfer delays are |
| 663 | handled in pump_transfers() */ |
| 664 | if (drv_data->cs_change) |
| 665 | drv_data->cs_control(SPI_CS_DEASSERT); |
| 666 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 667 | /* Calculate number of trailing data and read them */ |
| 668 | dev_dbg(&drv_data->pdev->dev, |
| 669 | "dma_transfer - test = 0x%08X\n", |
| 670 | readl(regs + SPI_TEST)); |
| 671 | drv_data->rx = drv_data->rx_end - |
| 672 | ((readl(regs + SPI_TEST) & |
| 673 | SPI_TEST_RXCNT) >> |
| 674 | SPI_TEST_RXCNT_LSB)*drv_data->n_bytes; |
| 675 | read(drv_data); |
| 676 | } else { |
| 677 | /* Write only transfer */ |
| 678 | unmap_dma_buffers(drv_data); |
| 679 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 680 | flush(drv_data); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 681 | } |
| 682 | |
| 683 | /* End of transfer, update total byte transfered */ |
| 684 | msg->actual_length += drv_data->len; |
| 685 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 686 | /* Move to next transfer */ |
| 687 | msg->state = next_transfer(drv_data); |
| 688 | |
| 689 | /* Schedule transfer tasklet */ |
| 690 | tasklet_schedule(&drv_data->pump_transfers); |
| 691 | |
| 692 | return IRQ_HANDLED; |
| 693 | } |
| 694 | |
| 695 | /* Opps problem detected */ |
| 696 | return IRQ_NONE; |
| 697 | } |
| 698 | |
| 699 | static irqreturn_t interrupt_wronly_transfer(struct driver_data *drv_data) |
| 700 | { |
| 701 | struct spi_message *msg = drv_data->cur_msg; |
| 702 | void __iomem *regs = drv_data->regs; |
| 703 | u32 status; |
| 704 | irqreturn_t handled = IRQ_NONE; |
| 705 | |
| 706 | status = readl(regs + SPI_INT_STATUS); |
| 707 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 708 | if (status & SPI_INTEN_TE) { |
| 709 | /* TXFIFO Empty Interrupt on the last transfered word */ |
| 710 | writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 711 | dev_dbg(&drv_data->pdev->dev, |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 712 | "interrupt_wronly_transfer - end of tx\n"); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 713 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 714 | flush(drv_data); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 715 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 716 | /* Update total byte transfered */ |
| 717 | msg->actual_length += drv_data->len; |
| 718 | |
| 719 | /* Move to next transfer */ |
| 720 | msg->state = next_transfer(drv_data); |
| 721 | |
| 722 | /* Schedule transfer tasklet */ |
| 723 | tasklet_schedule(&drv_data->pump_transfers); |
| 724 | |
| 725 | return IRQ_HANDLED; |
| 726 | } else { |
| 727 | while (status & SPI_STATUS_TH) { |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 728 | dev_dbg(&drv_data->pdev->dev, |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 729 | "interrupt_wronly_transfer - status = 0x%08X\n", |
| 730 | status); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 731 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 732 | /* Pump data */ |
| 733 | if (write(drv_data)) { |
| 734 | /* End of TXFIFO writes, |
| 735 | now wait until TXFIFO is empty */ |
| 736 | writel(SPI_INTEN_TE, regs + SPI_INT_STATUS); |
| 737 | return IRQ_HANDLED; |
| 738 | } |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 739 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 740 | status = readl(regs + SPI_INT_STATUS); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 741 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 742 | /* We did something */ |
| 743 | handled = IRQ_HANDLED; |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 744 | } |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 745 | } |
| 746 | |
| 747 | return handled; |
| 748 | } |
| 749 | |
| 750 | static irqreturn_t interrupt_transfer(struct driver_data *drv_data) |
| 751 | { |
| 752 | struct spi_message *msg = drv_data->cur_msg; |
| 753 | void __iomem *regs = drv_data->regs; |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 754 | u32 status, control; |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 755 | irqreturn_t handled = IRQ_NONE; |
| 756 | unsigned long limit; |
| 757 | |
| 758 | status = readl(regs + SPI_INT_STATUS); |
| 759 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 760 | if (status & SPI_INTEN_TE) { |
| 761 | /* TXFIFO Empty Interrupt on the last transfered word */ |
| 762 | writel(status & ~SPI_INTEN, regs + SPI_INT_STATUS); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 763 | dev_dbg(&drv_data->pdev->dev, |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 764 | "interrupt_transfer - end of tx\n"); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 765 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 766 | if (msg->state == ERROR_STATE) { |
| 767 | /* RXFIFO overrun was detected and message aborted */ |
| 768 | flush(drv_data); |
| 769 | } else { |
| 770 | /* Wait for end of transaction */ |
| 771 | do { |
| 772 | control = readl(regs + SPI_CONTROL); |
| 773 | } while (control & SPI_CONTROL_XCH); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 774 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 775 | /* Release chip select if requested, transfer delays are |
| 776 | handled in pump_transfers */ |
| 777 | if (drv_data->cs_change) |
| 778 | drv_data->cs_control(SPI_CS_DEASSERT); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 779 | |
| 780 | /* Read trailing bytes */ |
| 781 | limit = loops_per_jiffy << 1; |
| 782 | while ((read(drv_data) == 0) && limit--); |
| 783 | |
| 784 | if (limit == 0) |
| 785 | dev_err(&drv_data->pdev->dev, |
| 786 | "interrupt_transfer - " |
| 787 | "trailing byte read failed\n"); |
| 788 | else |
| 789 | dev_dbg(&drv_data->pdev->dev, |
| 790 | "interrupt_transfer - end of rx\n"); |
| 791 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 792 | /* Update total byte transfered */ |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 793 | msg->actual_length += drv_data->len; |
| 794 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 795 | /* Move to next transfer */ |
| 796 | msg->state = next_transfer(drv_data); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 797 | } |
| 798 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 799 | /* Schedule transfer tasklet */ |
| 800 | tasklet_schedule(&drv_data->pump_transfers); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 801 | |
Andrea Paterniani | 5d9f3f6 | 2008-04-28 02:14:21 -0700 | [diff] [blame] | 802 | return IRQ_HANDLED; |
| 803 | } else { |
| 804 | while (status & (SPI_STATUS_TH | SPI_STATUS_RO)) { |
| 805 | dev_dbg(&drv_data->pdev->dev, |
| 806 | "interrupt_transfer - status = 0x%08X\n", |
| 807 | status); |
| 808 | |
| 809 | if (status & SPI_STATUS_RO) { |
| 810 | /* RXFIFO overrun, abort message end wait |
| 811 | until TXFIFO is empty */ |
| 812 | writel(SPI_INTEN_TE, regs + SPI_INT_STATUS); |
| 813 | |
| 814 | dev_warn(&drv_data->pdev->dev, |
| 815 | "interrupt_transfer - fifo overun\n" |
| 816 | " data not yet written = %d\n" |
| 817 | " data not yet read = %d\n", |
| 818 | data_to_write(drv_data), |
| 819 | data_to_read(drv_data)); |
| 820 | |
| 821 | msg->state = ERROR_STATE; |
| 822 | |
| 823 | return IRQ_HANDLED; |
| 824 | } |
| 825 | |
| 826 | /* Pump data */ |
| 827 | read(drv_data); |
| 828 | if (write(drv_data)) { |
| 829 | /* End of TXFIFO writes, |
| 830 | now wait until TXFIFO is empty */ |
| 831 | writel(SPI_INTEN_TE, regs + SPI_INT_STATUS); |
| 832 | return IRQ_HANDLED; |
| 833 | } |
| 834 | |
| 835 | status = readl(regs + SPI_INT_STATUS); |
| 836 | |
| 837 | /* We did something */ |
| 838 | handled = IRQ_HANDLED; |
| 839 | } |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 840 | } |
| 841 | |
| 842 | return handled; |
| 843 | } |
| 844 | |
| 845 | static irqreturn_t spi_int(int irq, void *dev_id) |
| 846 | { |
| 847 | struct driver_data *drv_data = (struct driver_data *)dev_id; |
| 848 | |
| 849 | if (!drv_data->cur_msg) { |
| 850 | dev_err(&drv_data->pdev->dev, |
| 851 | "spi_int - bad message state\n"); |
| 852 | /* Never fail */ |
| 853 | return IRQ_HANDLED; |
| 854 | } |
| 855 | |
| 856 | return drv_data->transfer_handler(drv_data); |
| 857 | } |
| 858 | |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 859 | static inline u32 spi_speed_hz(struct driver_data *drv_data, u32 data_rate) |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 860 | { |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 861 | return clk_get_rate(drv_data->clk) / (4 << ((data_rate) >> 13)); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 862 | } |
| 863 | |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 864 | static u32 spi_data_rate(struct driver_data *drv_data, u32 speed_hz) |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 865 | { |
| 866 | u32 div; |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 867 | u32 quantized_hz = clk_get_rate(drv_data->clk) >> 2; |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 868 | |
| 869 | for (div = SPI_PERCLK2_DIV_MIN; |
| 870 | div <= SPI_PERCLK2_DIV_MAX; |
| 871 | div++, quantized_hz >>= 1) { |
| 872 | if (quantized_hz <= speed_hz) |
| 873 | /* Max available speed LEQ required speed */ |
| 874 | return div << 13; |
| 875 | } |
| 876 | return SPI_CONTROL_DATARATE_BAD; |
| 877 | } |
| 878 | |
| 879 | static void pump_transfers(unsigned long data) |
| 880 | { |
| 881 | struct driver_data *drv_data = (struct driver_data *)data; |
| 882 | struct spi_message *message; |
| 883 | struct spi_transfer *transfer, *previous; |
| 884 | struct chip_data *chip; |
| 885 | void __iomem *regs; |
| 886 | u32 tmp, control; |
| 887 | |
| 888 | dev_dbg(&drv_data->pdev->dev, "pump_transfer\n"); |
| 889 | |
| 890 | message = drv_data->cur_msg; |
| 891 | |
| 892 | /* Handle for abort */ |
| 893 | if (message->state == ERROR_STATE) { |
| 894 | message->status = -EIO; |
| 895 | giveback(message, drv_data); |
| 896 | return; |
| 897 | } |
| 898 | |
| 899 | /* Handle end of message */ |
| 900 | if (message->state == DONE_STATE) { |
| 901 | message->status = 0; |
| 902 | giveback(message, drv_data); |
| 903 | return; |
| 904 | } |
| 905 | |
| 906 | chip = drv_data->cur_chip; |
| 907 | |
| 908 | /* Delay if requested at end of transfer*/ |
| 909 | transfer = drv_data->cur_transfer; |
| 910 | if (message->state == RUNNING_STATE) { |
| 911 | previous = list_entry(transfer->transfer_list.prev, |
| 912 | struct spi_transfer, |
| 913 | transfer_list); |
| 914 | if (previous->delay_usecs) |
| 915 | udelay(previous->delay_usecs); |
| 916 | } else { |
| 917 | /* START_STATE */ |
| 918 | message->state = RUNNING_STATE; |
| 919 | drv_data->cs_control = chip->cs_control; |
| 920 | } |
| 921 | |
| 922 | transfer = drv_data->cur_transfer; |
| 923 | drv_data->tx = (void *)transfer->tx_buf; |
| 924 | drv_data->tx_end = drv_data->tx + transfer->len; |
| 925 | drv_data->rx = transfer->rx_buf; |
| 926 | drv_data->rx_end = drv_data->rx + transfer->len; |
| 927 | drv_data->rx_dma = transfer->rx_dma; |
| 928 | drv_data->tx_dma = transfer->tx_dma; |
| 929 | drv_data->len = transfer->len; |
| 930 | drv_data->cs_change = transfer->cs_change; |
| 931 | drv_data->rd_only = (drv_data->tx == NULL); |
| 932 | |
| 933 | regs = drv_data->regs; |
| 934 | control = readl(regs + SPI_CONTROL); |
| 935 | |
| 936 | /* Bits per word setup */ |
| 937 | tmp = transfer->bits_per_word; |
| 938 | if (tmp == 0) { |
| 939 | /* Use device setup */ |
| 940 | tmp = chip->bits_per_word; |
| 941 | drv_data->n_bytes = chip->n_bytes; |
| 942 | } else |
| 943 | /* Use per-transfer setup */ |
| 944 | drv_data->n_bytes = (tmp <= 8) ? 1 : 2; |
| 945 | u32_EDIT(control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1); |
| 946 | |
| 947 | /* Speed setup (surely valid because already checked) */ |
| 948 | tmp = transfer->speed_hz; |
| 949 | if (tmp == 0) |
| 950 | tmp = chip->max_speed_hz; |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 951 | tmp = spi_data_rate(drv_data, tmp); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 952 | u32_EDIT(control, SPI_CONTROL_DATARATE, tmp); |
| 953 | |
| 954 | writel(control, regs + SPI_CONTROL); |
| 955 | |
| 956 | /* Assert device chip-select */ |
| 957 | drv_data->cs_control(SPI_CS_ASSERT); |
| 958 | |
| 959 | /* DMA cannot read/write SPI FIFOs other than 16 bits at a time; hence |
| 960 | if bits_per_word is less or equal 8 PIO transfers are performed. |
| 961 | Moreover DMA is convinient for transfer length bigger than FIFOs |
| 962 | byte size. */ |
| 963 | if ((drv_data->n_bytes == 2) && |
| 964 | (drv_data->len > SPI_FIFO_DEPTH*SPI_FIFO_BYTE_WIDTH) && |
| 965 | (map_dma_buffers(drv_data) == 0)) { |
| 966 | dev_dbg(&drv_data->pdev->dev, |
| 967 | "pump dma transfer\n" |
| 968 | " tx = %p\n" |
| 969 | " tx_dma = %08X\n" |
| 970 | " rx = %p\n" |
| 971 | " rx_dma = %08X\n" |
| 972 | " len = %d\n", |
| 973 | drv_data->tx, |
| 974 | (unsigned int)drv_data->tx_dma, |
| 975 | drv_data->rx, |
| 976 | (unsigned int)drv_data->rx_dma, |
| 977 | drv_data->len); |
| 978 | |
| 979 | /* Ensure we have the correct interrupt handler */ |
| 980 | drv_data->transfer_handler = dma_transfer; |
| 981 | |
| 982 | /* Trigger transfer */ |
| 983 | writel(readl(regs + SPI_CONTROL) | SPI_CONTROL_XCH, |
| 984 | regs + SPI_CONTROL); |
| 985 | |
| 986 | /* Setup tx DMA */ |
| 987 | if (drv_data->tx) |
| 988 | /* Linear source address */ |
| 989 | CCR(drv_data->tx_channel) = |
| 990 | CCR_DMOD_FIFO | |
| 991 | CCR_SMOD_LINEAR | |
| 992 | CCR_SSIZ_32 | CCR_DSIZ_16 | |
| 993 | CCR_REN; |
| 994 | else |
| 995 | /* Read only transfer -> fixed source address for |
| 996 | dummy write to achive read */ |
| 997 | CCR(drv_data->tx_channel) = |
| 998 | CCR_DMOD_FIFO | |
| 999 | CCR_SMOD_FIFO | |
| 1000 | CCR_SSIZ_32 | CCR_DSIZ_16 | |
| 1001 | CCR_REN; |
| 1002 | |
| 1003 | imx_dma_setup_single( |
| 1004 | drv_data->tx_channel, |
| 1005 | drv_data->tx_dma, |
| 1006 | drv_data->len, |
| 1007 | drv_data->rd_data_phys + 4, |
| 1008 | DMA_MODE_WRITE); |
| 1009 | |
| 1010 | if (drv_data->rx) { |
| 1011 | /* Setup rx DMA for linear destination address */ |
| 1012 | CCR(drv_data->rx_channel) = |
| 1013 | CCR_DMOD_LINEAR | |
| 1014 | CCR_SMOD_FIFO | |
| 1015 | CCR_DSIZ_32 | CCR_SSIZ_16 | |
| 1016 | CCR_REN; |
| 1017 | imx_dma_setup_single( |
| 1018 | drv_data->rx_channel, |
| 1019 | drv_data->rx_dma, |
| 1020 | drv_data->len, |
| 1021 | drv_data->rd_data_phys, |
| 1022 | DMA_MODE_READ); |
| 1023 | imx_dma_enable(drv_data->rx_channel); |
| 1024 | |
| 1025 | /* Enable SPI interrupt */ |
| 1026 | writel(SPI_INTEN_RO, regs + SPI_INT_STATUS); |
| 1027 | |
| 1028 | /* Set SPI to request DMA service on both |
| 1029 | Rx and Tx half fifo watermark */ |
| 1030 | writel(SPI_DMA_RHDEN | SPI_DMA_THDEN, regs + SPI_DMA); |
| 1031 | } else |
| 1032 | /* Write only access -> set SPI to request DMA |
| 1033 | service on Tx half fifo watermark */ |
| 1034 | writel(SPI_DMA_THDEN, regs + SPI_DMA); |
| 1035 | |
| 1036 | imx_dma_enable(drv_data->tx_channel); |
| 1037 | } else { |
| 1038 | dev_dbg(&drv_data->pdev->dev, |
| 1039 | "pump pio transfer\n" |
| 1040 | " tx = %p\n" |
| 1041 | " rx = %p\n" |
| 1042 | " len = %d\n", |
| 1043 | drv_data->tx, |
| 1044 | drv_data->rx, |
| 1045 | drv_data->len); |
| 1046 | |
| 1047 | /* Ensure we have the correct interrupt handler */ |
| 1048 | if (drv_data->rx) |
| 1049 | drv_data->transfer_handler = interrupt_transfer; |
| 1050 | else |
| 1051 | drv_data->transfer_handler = interrupt_wronly_transfer; |
| 1052 | |
| 1053 | /* Enable SPI interrupt */ |
| 1054 | if (drv_data->rx) |
| 1055 | writel(SPI_INTEN_TH | SPI_INTEN_RO, |
| 1056 | regs + SPI_INT_STATUS); |
| 1057 | else |
| 1058 | writel(SPI_INTEN_TH, regs + SPI_INT_STATUS); |
| 1059 | } |
| 1060 | } |
| 1061 | |
| 1062 | static void pump_messages(struct work_struct *work) |
| 1063 | { |
| 1064 | struct driver_data *drv_data = |
| 1065 | container_of(work, struct driver_data, work); |
| 1066 | unsigned long flags; |
| 1067 | |
| 1068 | /* Lock queue and check for queue work */ |
| 1069 | spin_lock_irqsave(&drv_data->lock, flags); |
| 1070 | if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { |
| 1071 | drv_data->busy = 0; |
| 1072 | spin_unlock_irqrestore(&drv_data->lock, flags); |
| 1073 | return; |
| 1074 | } |
| 1075 | |
| 1076 | /* Make sure we are not already running a message */ |
| 1077 | if (drv_data->cur_msg) { |
| 1078 | spin_unlock_irqrestore(&drv_data->lock, flags); |
| 1079 | return; |
| 1080 | } |
| 1081 | |
| 1082 | /* Extract head of queue */ |
| 1083 | drv_data->cur_msg = list_entry(drv_data->queue.next, |
| 1084 | struct spi_message, queue); |
| 1085 | list_del_init(&drv_data->cur_msg->queue); |
| 1086 | drv_data->busy = 1; |
| 1087 | spin_unlock_irqrestore(&drv_data->lock, flags); |
| 1088 | |
| 1089 | /* Initial message state */ |
| 1090 | drv_data->cur_msg->state = START_STATE; |
| 1091 | drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, |
| 1092 | struct spi_transfer, |
| 1093 | transfer_list); |
| 1094 | |
| 1095 | /* Setup the SPI using the per chip configuration */ |
| 1096 | drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); |
| 1097 | restore_state(drv_data); |
| 1098 | |
| 1099 | /* Mark as busy and launch transfers */ |
| 1100 | tasklet_schedule(&drv_data->pump_transfers); |
| 1101 | } |
| 1102 | |
| 1103 | static int transfer(struct spi_device *spi, struct spi_message *msg) |
| 1104 | { |
| 1105 | struct driver_data *drv_data = spi_master_get_devdata(spi->master); |
| 1106 | u32 min_speed_hz, max_speed_hz, tmp; |
| 1107 | struct spi_transfer *trans; |
| 1108 | unsigned long flags; |
| 1109 | |
| 1110 | msg->actual_length = 0; |
| 1111 | |
| 1112 | /* Per transfer setup check */ |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 1113 | min_speed_hz = spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1114 | max_speed_hz = spi->max_speed_hz; |
| 1115 | list_for_each_entry(trans, &msg->transfers, transfer_list) { |
| 1116 | tmp = trans->bits_per_word; |
| 1117 | if (tmp > 16) { |
| 1118 | dev_err(&drv_data->pdev->dev, |
| 1119 | "message rejected : " |
| 1120 | "invalid transfer bits_per_word (%d bits)\n", |
| 1121 | tmp); |
| 1122 | goto msg_rejected; |
| 1123 | } |
| 1124 | tmp = trans->speed_hz; |
| 1125 | if (tmp) { |
| 1126 | if (tmp < min_speed_hz) { |
| 1127 | dev_err(&drv_data->pdev->dev, |
| 1128 | "message rejected : " |
| 1129 | "device min speed (%d Hz) exceeds " |
| 1130 | "required transfer speed (%d Hz)\n", |
| 1131 | min_speed_hz, |
| 1132 | tmp); |
| 1133 | goto msg_rejected; |
| 1134 | } else if (tmp > max_speed_hz) { |
| 1135 | dev_err(&drv_data->pdev->dev, |
| 1136 | "message rejected : " |
| 1137 | "transfer speed (%d Hz) exceeds " |
| 1138 | "device max speed (%d Hz)\n", |
| 1139 | tmp, |
| 1140 | max_speed_hz); |
| 1141 | goto msg_rejected; |
| 1142 | } |
| 1143 | } |
| 1144 | } |
| 1145 | |
| 1146 | /* Message accepted */ |
| 1147 | msg->status = -EINPROGRESS; |
| 1148 | msg->state = START_STATE; |
| 1149 | |
| 1150 | spin_lock_irqsave(&drv_data->lock, flags); |
| 1151 | if (drv_data->run == QUEUE_STOPPED) { |
| 1152 | spin_unlock_irqrestore(&drv_data->lock, flags); |
| 1153 | return -ESHUTDOWN; |
| 1154 | } |
| 1155 | |
| 1156 | list_add_tail(&msg->queue, &drv_data->queue); |
| 1157 | if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) |
| 1158 | queue_work(drv_data->workqueue, &drv_data->work); |
| 1159 | |
| 1160 | spin_unlock_irqrestore(&drv_data->lock, flags); |
| 1161 | return 0; |
| 1162 | |
| 1163 | msg_rejected: |
| 1164 | /* Message rejected and not queued */ |
| 1165 | msg->status = -EINVAL; |
| 1166 | msg->state = ERROR_STATE; |
| 1167 | if (msg->complete) |
| 1168 | msg->complete(msg->context); |
| 1169 | return -EINVAL; |
| 1170 | } |
| 1171 | |
David Brownell | dccd573 | 2007-07-17 04:04:02 -0700 | [diff] [blame] | 1172 | /* the spi->mode bits understood by this driver: */ |
| 1173 | #define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH) |
| 1174 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1175 | /* On first setup bad values must free chip_data memory since will cause |
| 1176 | spi_new_device to fail. Bad value setup from protocol driver are simply not |
| 1177 | applied and notified to the calling driver. */ |
| 1178 | static int setup(struct spi_device *spi) |
| 1179 | { |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 1180 | struct driver_data *drv_data = spi_master_get_devdata(spi->master); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1181 | struct spi_imx_chip *chip_info; |
| 1182 | struct chip_data *chip; |
| 1183 | int first_setup = 0; |
| 1184 | u32 tmp; |
| 1185 | int status = 0; |
| 1186 | |
David Brownell | dccd573 | 2007-07-17 04:04:02 -0700 | [diff] [blame] | 1187 | if (spi->mode & ~MODEBITS) { |
| 1188 | dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n", |
| 1189 | spi->mode & ~MODEBITS); |
| 1190 | return -EINVAL; |
| 1191 | } |
| 1192 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1193 | /* Get controller data */ |
| 1194 | chip_info = spi->controller_data; |
| 1195 | |
| 1196 | /* Get controller_state */ |
| 1197 | chip = spi_get_ctldata(spi); |
| 1198 | if (chip == NULL) { |
| 1199 | first_setup = 1; |
| 1200 | |
| 1201 | chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); |
| 1202 | if (!chip) { |
| 1203 | dev_err(&spi->dev, |
Joe Perches | 898eb71 | 2007-10-18 03:06:30 -0700 | [diff] [blame] | 1204 | "setup - cannot allocate controller state\n"); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1205 | return -ENOMEM; |
| 1206 | } |
| 1207 | chip->control = SPI_DEFAULT_CONTROL; |
| 1208 | |
| 1209 | if (chip_info == NULL) { |
| 1210 | /* spi_board_info.controller_data not is supplied */ |
| 1211 | chip_info = kzalloc(sizeof(struct spi_imx_chip), |
| 1212 | GFP_KERNEL); |
| 1213 | if (!chip_info) { |
| 1214 | dev_err(&spi->dev, |
| 1215 | "setup - " |
Joe Perches | 898eb71 | 2007-10-18 03:06:30 -0700 | [diff] [blame] | 1216 | "cannot allocate controller data\n"); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1217 | status = -ENOMEM; |
| 1218 | goto err_first_setup; |
| 1219 | } |
| 1220 | /* Set controller data default value */ |
| 1221 | chip_info->enable_loopback = |
| 1222 | SPI_DEFAULT_ENABLE_LOOPBACK; |
| 1223 | chip_info->enable_dma = SPI_DEFAULT_ENABLE_DMA; |
| 1224 | chip_info->ins_ss_pulse = 1; |
| 1225 | chip_info->bclk_wait = SPI_DEFAULT_PERIOD_WAIT; |
| 1226 | chip_info->cs_control = null_cs_control; |
| 1227 | } |
| 1228 | } |
| 1229 | |
| 1230 | /* Now set controller state based on controller data */ |
| 1231 | |
| 1232 | if (first_setup) { |
| 1233 | /* SPI loopback */ |
| 1234 | if (chip_info->enable_loopback) |
| 1235 | chip->test = SPI_TEST_LBC; |
| 1236 | else |
| 1237 | chip->test = 0; |
| 1238 | |
| 1239 | /* SPI dma driven */ |
| 1240 | chip->enable_dma = chip_info->enable_dma; |
| 1241 | |
| 1242 | /* SPI /SS pulse between spi burst */ |
| 1243 | if (chip_info->ins_ss_pulse) |
| 1244 | u32_EDIT(chip->control, |
| 1245 | SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_1); |
| 1246 | else |
| 1247 | u32_EDIT(chip->control, |
| 1248 | SPI_CONTROL_SSCTL, SPI_CONTROL_SSCTL_0); |
| 1249 | |
| 1250 | /* SPI bclk waits between each bits_per_word spi burst */ |
| 1251 | if (chip_info->bclk_wait > SPI_PERIOD_MAX_WAIT) { |
| 1252 | dev_err(&spi->dev, |
| 1253 | "setup - " |
| 1254 | "bclk_wait exceeds max allowed (%d)\n", |
| 1255 | SPI_PERIOD_MAX_WAIT); |
| 1256 | goto err_first_setup; |
| 1257 | } |
| 1258 | chip->period = SPI_PERIOD_CSRC_BCLK | |
| 1259 | (chip_info->bclk_wait & SPI_PERIOD_WAIT); |
| 1260 | } |
| 1261 | |
| 1262 | /* SPI mode */ |
| 1263 | tmp = spi->mode; |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1264 | if (tmp & SPI_CS_HIGH) { |
| 1265 | u32_EDIT(chip->control, |
| 1266 | SPI_CONTROL_SSPOL, SPI_CONTROL_SSPOL_ACT_HIGH); |
| 1267 | } |
| 1268 | switch (tmp & SPI_MODE_3) { |
| 1269 | case SPI_MODE_0: |
| 1270 | tmp = 0; |
| 1271 | break; |
| 1272 | case SPI_MODE_1: |
| 1273 | tmp = SPI_CONTROL_PHA_1; |
| 1274 | break; |
| 1275 | case SPI_MODE_2: |
| 1276 | tmp = SPI_CONTROL_POL_ACT_LOW; |
| 1277 | break; |
| 1278 | default: |
| 1279 | /* SPI_MODE_3 */ |
| 1280 | tmp = SPI_CONTROL_PHA_1 | SPI_CONTROL_POL_ACT_LOW; |
| 1281 | break; |
| 1282 | } |
| 1283 | u32_EDIT(chip->control, SPI_CONTROL_POL | SPI_CONTROL_PHA, tmp); |
| 1284 | |
| 1285 | /* SPI word width */ |
| 1286 | tmp = spi->bits_per_word; |
| 1287 | if (tmp == 0) { |
| 1288 | tmp = 8; |
| 1289 | spi->bits_per_word = 8; |
| 1290 | } else if (tmp > 16) { |
| 1291 | status = -EINVAL; |
| 1292 | dev_err(&spi->dev, |
| 1293 | "setup - " |
| 1294 | "invalid bits_per_word (%d)\n", |
| 1295 | tmp); |
| 1296 | if (first_setup) |
| 1297 | goto err_first_setup; |
| 1298 | else { |
| 1299 | /* Undo setup using chip as backup copy */ |
| 1300 | tmp = chip->bits_per_word; |
| 1301 | spi->bits_per_word = tmp; |
| 1302 | } |
| 1303 | } |
| 1304 | chip->bits_per_word = tmp; |
| 1305 | u32_EDIT(chip->control, SPI_CONTROL_BITCOUNT_MASK, tmp - 1); |
| 1306 | chip->n_bytes = (tmp <= 8) ? 1 : 2; |
| 1307 | |
| 1308 | /* SPI datarate */ |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 1309 | tmp = spi_data_rate(drv_data, spi->max_speed_hz); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1310 | if (tmp == SPI_CONTROL_DATARATE_BAD) { |
| 1311 | status = -EINVAL; |
| 1312 | dev_err(&spi->dev, |
| 1313 | "setup - " |
| 1314 | "HW min speed (%d Hz) exceeds required " |
| 1315 | "max speed (%d Hz)\n", |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 1316 | spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN), |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1317 | spi->max_speed_hz); |
| 1318 | if (first_setup) |
| 1319 | goto err_first_setup; |
| 1320 | else |
| 1321 | /* Undo setup using chip as backup copy */ |
| 1322 | spi->max_speed_hz = chip->max_speed_hz; |
| 1323 | } else { |
| 1324 | u32_EDIT(chip->control, SPI_CONTROL_DATARATE, tmp); |
| 1325 | /* Actual rounded max_speed_hz */ |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 1326 | tmp = spi_speed_hz(drv_data, tmp); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1327 | spi->max_speed_hz = tmp; |
| 1328 | chip->max_speed_hz = tmp; |
| 1329 | } |
| 1330 | |
| 1331 | /* SPI chip-select management */ |
| 1332 | if (chip_info->cs_control) |
| 1333 | chip->cs_control = chip_info->cs_control; |
| 1334 | else |
| 1335 | chip->cs_control = null_cs_control; |
| 1336 | |
| 1337 | /* Save controller_state */ |
| 1338 | spi_set_ctldata(spi, chip); |
| 1339 | |
| 1340 | /* Summary */ |
| 1341 | dev_dbg(&spi->dev, |
| 1342 | "setup succeded\n" |
| 1343 | " loopback enable = %s\n" |
| 1344 | " dma enable = %s\n" |
| 1345 | " insert /ss pulse = %s\n" |
| 1346 | " period wait = %d\n" |
| 1347 | " mode = %d\n" |
| 1348 | " bits per word = %d\n" |
| 1349 | " min speed = %d Hz\n" |
| 1350 | " rounded max speed = %d Hz\n", |
| 1351 | chip->test & SPI_TEST_LBC ? "Yes" : "No", |
| 1352 | chip->enable_dma ? "Yes" : "No", |
| 1353 | chip->control & SPI_CONTROL_SSCTL ? "Yes" : "No", |
| 1354 | chip->period & SPI_PERIOD_WAIT, |
| 1355 | spi->mode, |
| 1356 | spi->bits_per_word, |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 1357 | spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN), |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1358 | spi->max_speed_hz); |
Andrea Paterniani | ac140a8 | 2007-06-01 00:47:07 -0700 | [diff] [blame] | 1359 | return status; |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1360 | |
| 1361 | err_first_setup: |
| 1362 | kfree(chip); |
| 1363 | return status; |
| 1364 | } |
| 1365 | |
David Brownell | bb2d1c3 | 2007-02-20 13:58:19 -0800 | [diff] [blame] | 1366 | static void cleanup(struct spi_device *spi) |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1367 | { |
David Brownell | bb2d1c3 | 2007-02-20 13:58:19 -0800 | [diff] [blame] | 1368 | kfree(spi_get_ctldata(spi)); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1369 | } |
| 1370 | |
David Brownell | d1e44d9 | 2007-10-16 01:27:46 -0700 | [diff] [blame] | 1371 | static int __init init_queue(struct driver_data *drv_data) |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1372 | { |
| 1373 | INIT_LIST_HEAD(&drv_data->queue); |
| 1374 | spin_lock_init(&drv_data->lock); |
| 1375 | |
| 1376 | drv_data->run = QUEUE_STOPPED; |
| 1377 | drv_data->busy = 0; |
| 1378 | |
| 1379 | tasklet_init(&drv_data->pump_transfers, |
| 1380 | pump_transfers, (unsigned long)drv_data); |
| 1381 | |
| 1382 | INIT_WORK(&drv_data->work, pump_messages); |
| 1383 | drv_data->workqueue = create_singlethread_workqueue( |
Kay Sievers | 6c7377a | 2009-03-24 16:38:21 -0700 | [diff] [blame^] | 1384 | dev_name(drv_data->master->dev.parent)); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1385 | if (drv_data->workqueue == NULL) |
| 1386 | return -EBUSY; |
| 1387 | |
| 1388 | return 0; |
| 1389 | } |
| 1390 | |
| 1391 | static int start_queue(struct driver_data *drv_data) |
| 1392 | { |
| 1393 | unsigned long flags; |
| 1394 | |
| 1395 | spin_lock_irqsave(&drv_data->lock, flags); |
| 1396 | |
| 1397 | if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { |
| 1398 | spin_unlock_irqrestore(&drv_data->lock, flags); |
| 1399 | return -EBUSY; |
| 1400 | } |
| 1401 | |
| 1402 | drv_data->run = QUEUE_RUNNING; |
| 1403 | drv_data->cur_msg = NULL; |
| 1404 | drv_data->cur_transfer = NULL; |
| 1405 | drv_data->cur_chip = NULL; |
| 1406 | spin_unlock_irqrestore(&drv_data->lock, flags); |
| 1407 | |
| 1408 | queue_work(drv_data->workqueue, &drv_data->work); |
| 1409 | |
| 1410 | return 0; |
| 1411 | } |
| 1412 | |
| 1413 | static int stop_queue(struct driver_data *drv_data) |
| 1414 | { |
| 1415 | unsigned long flags; |
| 1416 | unsigned limit = 500; |
| 1417 | int status = 0; |
| 1418 | |
| 1419 | spin_lock_irqsave(&drv_data->lock, flags); |
| 1420 | |
| 1421 | /* This is a bit lame, but is optimized for the common execution path. |
| 1422 | * A wait_queue on the drv_data->busy could be used, but then the common |
| 1423 | * execution path (pump_messages) would be required to call wake_up or |
| 1424 | * friends on every SPI message. Do this instead */ |
| 1425 | drv_data->run = QUEUE_STOPPED; |
| 1426 | while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { |
| 1427 | spin_unlock_irqrestore(&drv_data->lock, flags); |
| 1428 | msleep(10); |
| 1429 | spin_lock_irqsave(&drv_data->lock, flags); |
| 1430 | } |
| 1431 | |
| 1432 | if (!list_empty(&drv_data->queue) || drv_data->busy) |
| 1433 | status = -EBUSY; |
| 1434 | |
| 1435 | spin_unlock_irqrestore(&drv_data->lock, flags); |
| 1436 | |
| 1437 | return status; |
| 1438 | } |
| 1439 | |
| 1440 | static int destroy_queue(struct driver_data *drv_data) |
| 1441 | { |
| 1442 | int status; |
| 1443 | |
| 1444 | status = stop_queue(drv_data); |
| 1445 | if (status != 0) |
| 1446 | return status; |
| 1447 | |
| 1448 | if (drv_data->workqueue) |
| 1449 | destroy_workqueue(drv_data->workqueue); |
| 1450 | |
| 1451 | return 0; |
| 1452 | } |
| 1453 | |
David Brownell | d1e44d9 | 2007-10-16 01:27:46 -0700 | [diff] [blame] | 1454 | static int __init spi_imx_probe(struct platform_device *pdev) |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1455 | { |
| 1456 | struct device *dev = &pdev->dev; |
| 1457 | struct spi_imx_master *platform_info; |
| 1458 | struct spi_master *master; |
Julien Boibessot | 6a010b5 | 2008-12-01 13:13:55 -0800 | [diff] [blame] | 1459 | struct driver_data *drv_data; |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1460 | struct resource *res; |
| 1461 | int irq, status = 0; |
| 1462 | |
| 1463 | platform_info = dev->platform_data; |
| 1464 | if (platform_info == NULL) { |
| 1465 | dev_err(&pdev->dev, "probe - no platform data supplied\n"); |
| 1466 | status = -ENODEV; |
| 1467 | goto err_no_pdata; |
| 1468 | } |
| 1469 | |
| 1470 | /* Allocate master with space for drv_data */ |
| 1471 | master = spi_alloc_master(dev, sizeof(struct driver_data)); |
| 1472 | if (!master) { |
| 1473 | dev_err(&pdev->dev, "probe - cannot alloc spi_master\n"); |
| 1474 | status = -ENOMEM; |
| 1475 | goto err_no_mem; |
| 1476 | } |
| 1477 | drv_data = spi_master_get_devdata(master); |
| 1478 | drv_data->master = master; |
| 1479 | drv_data->master_info = platform_info; |
| 1480 | drv_data->pdev = pdev; |
| 1481 | |
| 1482 | master->bus_num = pdev->id; |
| 1483 | master->num_chipselect = platform_info->num_chipselect; |
| 1484 | master->cleanup = cleanup; |
| 1485 | master->setup = setup; |
| 1486 | master->transfer = transfer; |
| 1487 | |
| 1488 | drv_data->dummy_dma_buf = SPI_DUMMY_u32; |
| 1489 | |
Julien Boibessot | 6a010b5 | 2008-12-01 13:13:55 -0800 | [diff] [blame] | 1490 | drv_data->clk = clk_get(&pdev->dev, "perclk2"); |
| 1491 | if (IS_ERR(drv_data->clk)) { |
| 1492 | dev_err(&pdev->dev, "probe - cannot get clock\n"); |
| 1493 | status = PTR_ERR(drv_data->clk); |
| 1494 | goto err_no_clk; |
| 1495 | } |
| 1496 | clk_enable(drv_data->clk); |
| 1497 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1498 | /* Find and map resources */ |
| 1499 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 1500 | if (!res) { |
| 1501 | dev_err(&pdev->dev, "probe - MEM resources not defined\n"); |
| 1502 | status = -ENODEV; |
| 1503 | goto err_no_iores; |
| 1504 | } |
| 1505 | drv_data->ioarea = request_mem_region(res->start, |
| 1506 | res->end - res->start + 1, |
| 1507 | pdev->name); |
| 1508 | if (drv_data->ioarea == NULL) { |
| 1509 | dev_err(&pdev->dev, "probe - cannot reserve region\n"); |
| 1510 | status = -ENXIO; |
| 1511 | goto err_no_iores; |
| 1512 | } |
| 1513 | drv_data->regs = ioremap(res->start, res->end - res->start + 1); |
| 1514 | if (drv_data->regs == NULL) { |
| 1515 | dev_err(&pdev->dev, "probe - cannot map IO\n"); |
| 1516 | status = -ENXIO; |
| 1517 | goto err_no_iomap; |
| 1518 | } |
| 1519 | drv_data->rd_data_phys = (dma_addr_t)res->start; |
| 1520 | |
| 1521 | /* Attach to IRQ */ |
| 1522 | irq = platform_get_irq(pdev, 0); |
| 1523 | if (irq < 0) { |
| 1524 | dev_err(&pdev->dev, "probe - IRQ resource not defined\n"); |
| 1525 | status = -ENODEV; |
| 1526 | goto err_no_irqres; |
| 1527 | } |
Kay Sievers | 6c7377a | 2009-03-24 16:38:21 -0700 | [diff] [blame^] | 1528 | status = request_irq(irq, spi_int, IRQF_DISABLED, |
| 1529 | dev_name(dev), drv_data); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1530 | if (status < 0) { |
| 1531 | dev_err(&pdev->dev, "probe - cannot get IRQ (%d)\n", status); |
| 1532 | goto err_no_irqres; |
| 1533 | } |
| 1534 | |
| 1535 | /* Setup DMA if requested */ |
| 1536 | drv_data->tx_channel = -1; |
| 1537 | drv_data->rx_channel = -1; |
| 1538 | if (platform_info->enable_dma) { |
| 1539 | /* Get rx DMA channel */ |
Paulius Zaleckas | f7def13e | 2008-06-25 13:25:13 +0100 | [diff] [blame] | 1540 | drv_data->rx_channel = imx_dma_request_by_prio("spi_imx_rx", |
| 1541 | DMA_PRIO_HIGH); |
| 1542 | if (drv_data->rx_channel < 0) { |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1543 | dev_err(dev, |
| 1544 | "probe - problem (%d) requesting rx channel\n", |
Paulius Zaleckas | f7def13e | 2008-06-25 13:25:13 +0100 | [diff] [blame] | 1545 | drv_data->rx_channel); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1546 | goto err_no_rxdma; |
| 1547 | } else |
| 1548 | imx_dma_setup_handlers(drv_data->rx_channel, NULL, |
| 1549 | dma_err_handler, drv_data); |
| 1550 | |
| 1551 | /* Get tx DMA channel */ |
Paulius Zaleckas | f7def13e | 2008-06-25 13:25:13 +0100 | [diff] [blame] | 1552 | drv_data->tx_channel = imx_dma_request_by_prio("spi_imx_tx", |
| 1553 | DMA_PRIO_MEDIUM); |
| 1554 | if (drv_data->tx_channel < 0) { |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1555 | dev_err(dev, |
| 1556 | "probe - problem (%d) requesting tx channel\n", |
Paulius Zaleckas | f7def13e | 2008-06-25 13:25:13 +0100 | [diff] [blame] | 1557 | drv_data->tx_channel); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1558 | imx_dma_free(drv_data->rx_channel); |
| 1559 | goto err_no_txdma; |
| 1560 | } else |
| 1561 | imx_dma_setup_handlers(drv_data->tx_channel, |
| 1562 | dma_tx_handler, dma_err_handler, |
| 1563 | drv_data); |
| 1564 | |
| 1565 | /* Set request source and burst length for allocated channels */ |
| 1566 | switch (drv_data->pdev->id) { |
| 1567 | case 1: |
| 1568 | /* Using SPI1 */ |
| 1569 | RSSR(drv_data->rx_channel) = DMA_REQ_SPI1_R; |
| 1570 | RSSR(drv_data->tx_channel) = DMA_REQ_SPI1_T; |
| 1571 | break; |
| 1572 | case 2: |
| 1573 | /* Using SPI2 */ |
| 1574 | RSSR(drv_data->rx_channel) = DMA_REQ_SPI2_R; |
| 1575 | RSSR(drv_data->tx_channel) = DMA_REQ_SPI2_T; |
| 1576 | break; |
| 1577 | default: |
| 1578 | dev_err(dev, "probe - bad SPI Id\n"); |
| 1579 | imx_dma_free(drv_data->rx_channel); |
| 1580 | imx_dma_free(drv_data->tx_channel); |
| 1581 | status = -ENODEV; |
| 1582 | goto err_no_devid; |
| 1583 | } |
| 1584 | BLR(drv_data->rx_channel) = SPI_DMA_BLR; |
| 1585 | BLR(drv_data->tx_channel) = SPI_DMA_BLR; |
| 1586 | } |
| 1587 | |
| 1588 | /* Load default SPI configuration */ |
| 1589 | writel(SPI_RESET_START, drv_data->regs + SPI_RESET); |
| 1590 | writel(0, drv_data->regs + SPI_RESET); |
| 1591 | writel(SPI_DEFAULT_CONTROL, drv_data->regs + SPI_CONTROL); |
| 1592 | |
| 1593 | /* Initial and start queue */ |
| 1594 | status = init_queue(drv_data); |
| 1595 | if (status != 0) { |
| 1596 | dev_err(&pdev->dev, "probe - problem initializing queue\n"); |
| 1597 | goto err_init_queue; |
| 1598 | } |
| 1599 | status = start_queue(drv_data); |
| 1600 | if (status != 0) { |
| 1601 | dev_err(&pdev->dev, "probe - problem starting queue\n"); |
| 1602 | goto err_start_queue; |
| 1603 | } |
| 1604 | |
| 1605 | /* Register with the SPI framework */ |
| 1606 | platform_set_drvdata(pdev, drv_data); |
| 1607 | status = spi_register_master(master); |
| 1608 | if (status != 0) { |
| 1609 | dev_err(&pdev->dev, "probe - problem registering spi master\n"); |
| 1610 | goto err_spi_register; |
| 1611 | } |
| 1612 | |
| 1613 | dev_dbg(dev, "probe succeded\n"); |
| 1614 | return 0; |
| 1615 | |
| 1616 | err_init_queue: |
| 1617 | err_start_queue: |
| 1618 | err_spi_register: |
| 1619 | destroy_queue(drv_data); |
| 1620 | |
| 1621 | err_no_rxdma: |
| 1622 | err_no_txdma: |
| 1623 | err_no_devid: |
| 1624 | free_irq(irq, drv_data); |
| 1625 | |
| 1626 | err_no_irqres: |
| 1627 | iounmap(drv_data->regs); |
| 1628 | |
| 1629 | err_no_iomap: |
| 1630 | release_resource(drv_data->ioarea); |
| 1631 | kfree(drv_data->ioarea); |
| 1632 | |
| 1633 | err_no_iores: |
Julien Boibessot | 6a010b5 | 2008-12-01 13:13:55 -0800 | [diff] [blame] | 1634 | clk_disable(drv_data->clk); |
| 1635 | clk_put(drv_data->clk); |
| 1636 | |
| 1637 | err_no_clk: |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1638 | spi_master_put(master); |
| 1639 | |
| 1640 | err_no_pdata: |
| 1641 | err_no_mem: |
| 1642 | return status; |
| 1643 | } |
| 1644 | |
David Brownell | d1e44d9 | 2007-10-16 01:27:46 -0700 | [diff] [blame] | 1645 | static int __exit spi_imx_remove(struct platform_device *pdev) |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1646 | { |
| 1647 | struct driver_data *drv_data = platform_get_drvdata(pdev); |
| 1648 | int irq; |
| 1649 | int status = 0; |
| 1650 | |
| 1651 | if (!drv_data) |
| 1652 | return 0; |
| 1653 | |
| 1654 | tasklet_kill(&drv_data->pump_transfers); |
| 1655 | |
| 1656 | /* Remove the queue */ |
| 1657 | status = destroy_queue(drv_data); |
| 1658 | if (status != 0) { |
| 1659 | dev_err(&pdev->dev, "queue remove failed (%d)\n", status); |
| 1660 | return status; |
| 1661 | } |
| 1662 | |
| 1663 | /* Reset SPI */ |
| 1664 | writel(SPI_RESET_START, drv_data->regs + SPI_RESET); |
| 1665 | writel(0, drv_data->regs + SPI_RESET); |
| 1666 | |
| 1667 | /* Release DMA */ |
| 1668 | if (drv_data->master_info->enable_dma) { |
| 1669 | RSSR(drv_data->rx_channel) = 0; |
| 1670 | RSSR(drv_data->tx_channel) = 0; |
| 1671 | imx_dma_free(drv_data->tx_channel); |
| 1672 | imx_dma_free(drv_data->rx_channel); |
| 1673 | } |
| 1674 | |
| 1675 | /* Release IRQ */ |
| 1676 | irq = platform_get_irq(pdev, 0); |
| 1677 | if (irq >= 0) |
| 1678 | free_irq(irq, drv_data); |
| 1679 | |
Sascha Hauer | 38a41fd | 2008-07-05 10:02:46 +0200 | [diff] [blame] | 1680 | clk_disable(drv_data->clk); |
| 1681 | clk_put(drv_data->clk); |
| 1682 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1683 | /* Release map resources */ |
| 1684 | iounmap(drv_data->regs); |
| 1685 | release_resource(drv_data->ioarea); |
| 1686 | kfree(drv_data->ioarea); |
| 1687 | |
| 1688 | /* Disconnect from the SPI framework */ |
| 1689 | spi_unregister_master(drv_data->master); |
| 1690 | spi_master_put(drv_data->master); |
| 1691 | |
| 1692 | /* Prevent double remove */ |
| 1693 | platform_set_drvdata(pdev, NULL); |
| 1694 | |
| 1695 | dev_dbg(&pdev->dev, "remove succeded\n"); |
| 1696 | |
| 1697 | return 0; |
| 1698 | } |
| 1699 | |
| 1700 | static void spi_imx_shutdown(struct platform_device *pdev) |
| 1701 | { |
| 1702 | struct driver_data *drv_data = platform_get_drvdata(pdev); |
| 1703 | |
| 1704 | /* Reset SPI */ |
| 1705 | writel(SPI_RESET_START, drv_data->regs + SPI_RESET); |
| 1706 | writel(0, drv_data->regs + SPI_RESET); |
| 1707 | |
| 1708 | dev_dbg(&pdev->dev, "shutdown succeded\n"); |
| 1709 | } |
| 1710 | |
| 1711 | #ifdef CONFIG_PM |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1712 | |
| 1713 | static int spi_imx_suspend(struct platform_device *pdev, pm_message_t state) |
| 1714 | { |
| 1715 | struct driver_data *drv_data = platform_get_drvdata(pdev); |
| 1716 | int status = 0; |
| 1717 | |
| 1718 | status = stop_queue(drv_data); |
| 1719 | if (status != 0) { |
| 1720 | dev_warn(&pdev->dev, "suspend cannot stop queue\n"); |
| 1721 | return status; |
| 1722 | } |
| 1723 | |
| 1724 | dev_dbg(&pdev->dev, "suspended\n"); |
| 1725 | |
| 1726 | return 0; |
| 1727 | } |
| 1728 | |
| 1729 | static int spi_imx_resume(struct platform_device *pdev) |
| 1730 | { |
| 1731 | struct driver_data *drv_data = platform_get_drvdata(pdev); |
| 1732 | int status = 0; |
| 1733 | |
| 1734 | /* Start the queue running */ |
| 1735 | status = start_queue(drv_data); |
| 1736 | if (status != 0) |
| 1737 | dev_err(&pdev->dev, "problem starting queue (%d)\n", status); |
| 1738 | else |
| 1739 | dev_dbg(&pdev->dev, "resumed\n"); |
| 1740 | |
| 1741 | return status; |
| 1742 | } |
| 1743 | #else |
| 1744 | #define spi_imx_suspend NULL |
| 1745 | #define spi_imx_resume NULL |
| 1746 | #endif /* CONFIG_PM */ |
| 1747 | |
Kay Sievers | 7e38c3c | 2008-04-10 21:29:20 -0700 | [diff] [blame] | 1748 | /* work with hotplug and coldplug */ |
| 1749 | MODULE_ALIAS("platform:spi_imx"); |
| 1750 | |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1751 | static struct platform_driver driver = { |
| 1752 | .driver = { |
David Brownell | fc3ba95 | 2007-08-30 23:56:24 -0700 | [diff] [blame] | 1753 | .name = "spi_imx", |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1754 | .owner = THIS_MODULE, |
| 1755 | }, |
David Brownell | d1e44d9 | 2007-10-16 01:27:46 -0700 | [diff] [blame] | 1756 | .remove = __exit_p(spi_imx_remove), |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1757 | .shutdown = spi_imx_shutdown, |
| 1758 | .suspend = spi_imx_suspend, |
| 1759 | .resume = spi_imx_resume, |
| 1760 | }; |
| 1761 | |
| 1762 | static int __init spi_imx_init(void) |
| 1763 | { |
David Brownell | d1e44d9 | 2007-10-16 01:27:46 -0700 | [diff] [blame] | 1764 | return platform_driver_probe(&driver, spi_imx_probe); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1765 | } |
| 1766 | module_init(spi_imx_init); |
| 1767 | |
| 1768 | static void __exit spi_imx_exit(void) |
| 1769 | { |
| 1770 | platform_driver_unregister(&driver); |
| 1771 | } |
| 1772 | module_exit(spi_imx_exit); |
| 1773 | |
| 1774 | MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>"); |
Will Newton | 8805f23 | 2007-12-10 15:49:27 -0800 | [diff] [blame] | 1775 | MODULE_DESCRIPTION("iMX SPI Controller Driver"); |
Andrea Paterniani | 69c202a | 2007-02-12 00:52:39 -0800 | [diff] [blame] | 1776 | MODULE_LICENSE("GPL"); |