Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / 72f4e49830e11412078171f94ea13b0d0396fdd1 / . / arch / arm / boot / dts / sun5i-a10s-olinuxino-micro.dts
blob: 23611b71d3aa65736b0419abaafe0a93491e2907 [file] [log] [blame]
Maxime Ripardd0f26772013-06-09 10:41:22 +0200[diff] [blame]1/*
2 * Copyright 2013 Maxime Ripard
3 *
4 * Maxime Ripard <maxime.ripard@free-electrons.com>
5 *
6 * The code contained herein is licensed under the GNU General Public
7 * License. You may obtain a copy of the GNU General Public License
8 * Version 2 or later at the following locations:
9 *
10 * http://www.opensource.org/licenses/gpl-license.html
11 * http://www.gnu.org/copyleft/gpl.html
12 */
13
14/dts-v1/;
15/include/ "sun5i-a10s.dtsi"
Hans de Goede72f4e492014-03-01 20:26:32 +0100[diff] [blame^]16/include/ "sunxi-common-regulators.dtsi"
Maxime Ripardd0f26772013-06-09 10:41:22 +0200[diff] [blame]17
18/ {
19 model = "Olimex A10s-Olinuxino Micro";
20 compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
21
Maxime Ripard9e199292013-08-03 16:07:36 +0200[diff] [blame]22 soc@01c00000 {
Maxime Ripardd0f26772013-06-09 10:41:22 +0200[diff] [blame]23 emac: ethernet@01c0b000 {
24 pinctrl-names = "default";
25 pinctrl-0 = <&emac_pins_a>;
26 phy = <&phy1>;
27 status = "okay";
28 };
29
30 mdio@01c0b080 {
31 status = "okay";
32
33 phy1: ethernet-phy@1 {
34 reg = <1>;
35 };
36 };
37
Hans de Goede72f4e492014-03-01 20:26:32 +0100[diff] [blame^]38 usbphy: phy@01c13400 {
39 usb1_vbus-supply = <&reg_usb1_vbus>;
40 status = "okay";
41 };
42
43 ehci0: usb@01c14000 {
44 status = "okay";
45 };
46
47 ohci0: usb@01c14400 {
48 status = "okay";
49 };
50
Maxime Ripardd0f26772013-06-09 10:41:22 +0200[diff] [blame]51 pinctrl@01c20800 {
52 led_pins_olinuxino: led_pins@0 {
53 allwinner,pins = "PE3";
54 allwinner,function = "gpio_out";
55 allwinner,drive = <1>;
56 allwinner,pull = <0>;
57 };
Hans de Goede72f4e492014-03-01 20:26:32 +0100[diff] [blame^]58
59 usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
60 allwinner,pins = "PB10";
61 allwinner,function = "gpio_out";
62 allwinner,drive = <0>;
63 allwinner,pull = <0>;
64 };
Maxime Ripardd0f26772013-06-09 10:41:22 +0200[diff] [blame]65 };
66
67 uart0: serial@01c28000 {
68 pinctrl-names = "default";
69 pinctrl-0 = <&uart0_pins_a>;
70 status = "okay";
71 };
72
73 uart2: serial@01c28800 {
74 pinctrl-names = "default";
75 pinctrl-0 = <&uart2_pins_a>;
76 status = "okay";
77 };
78
79 uart3: serial@01c28c00 {
80 pinctrl-names = "default";
81 pinctrl-0 = <&uart3_pins_a>;
82 status = "okay";
83 };
Emilio Lópezd6c451d2013-07-07 18:31:58 -0300[diff] [blame]84
85 i2c0: i2c@01c2ac00 {
86 pinctrl-names = "default";
87 pinctrl-0 = <&i2c0_pins_a>;
88 status = "okay";
89 };
90
91 i2c1: i2c@01c2b000 {
92 pinctrl-names = "default";
93 pinctrl-0 = <&i2c1_pins_a>;
94 status = "okay";
Emilio Lópezbdbfd8e2013-07-07 18:31:59 -0300[diff] [blame]95
96 at24@50 {
97 compatible = "at,24c16";
98 pagesize = <16>;
99 reg = <0x50>;
100 read-only;
101 };
Emilio Lópezd6c451d2013-07-07 18:31:58 -0300[diff] [blame]102 };
103
104 i2c2: i2c@01c2b400 {
105 pinctrl-names = "default";
106 pinctrl-0 = <&i2c2_pins_a>;
107 status = "okay";
108 };
Maxime Ripardd0f26772013-06-09 10:41:22 +0200[diff] [blame]109 };
110
111 leds {
112 compatible = "gpio-leds";
113 pinctrl-names = "default";
114 pinctrl-0 = <&led_pins_olinuxino>;
115
116 green {
117 label = "a10s-olinuxino-micro:green:usr";
118 gpios = <&pio 4 3 0>;
119 default-state = "on";
120 };
121 };
Hans de Goede72f4e492014-03-01 20:26:32 +0100[diff] [blame^]122
123 reg_usb1_vbus: usb1-vbus {
124 pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
125 gpio = <&pio 1 10 0>;
126 status = "okay";
127 };
Maxime Ripardd0f26772013-06-09 10:41:22 +0200[diff] [blame]128};