Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Driver for A2 audio system used in SGI machines |
| 3 | * Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org> |
| 4 | * |
| 5 | * Based on Ulf Carlsson's code. |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program; if not, write to the Free Software |
| 18 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 19 | * |
| 20 | * Supported devices: |
| 21 | * /dev/dsp standard dsp device, (mostly) OSS compatible |
| 22 | * /dev/mixer standard mixer device, (mostly) OSS compatible |
| 23 | * |
| 24 | */ |
| 25 | #include <linux/kernel.h> |
| 26 | #include <linux/module.h> |
| 27 | #include <linux/sched.h> |
| 28 | #include <linux/init.h> |
| 29 | #include <linux/slab.h> |
| 30 | #include <linux/poll.h> |
| 31 | #include <linux/interrupt.h> |
| 32 | #include <linux/dma-mapping.h> |
| 33 | #include <linux/sound.h> |
| 34 | #include <linux/soundcard.h> |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 35 | #include <linux/mutex.h> |
| 36 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 37 | |
| 38 | #include <asm/io.h> |
| 39 | #include <asm/sgi/hpc3.h> |
| 40 | #include <asm/sgi/ip22.h> |
| 41 | |
| 42 | #include "hal2.h" |
| 43 | |
| 44 | #if 0 |
| 45 | #define DEBUG(args...) printk(args) |
| 46 | #else |
| 47 | #define DEBUG(args...) |
| 48 | #endif |
| 49 | |
| 50 | #if 0 |
| 51 | #define DEBUG_MIX(args...) printk(args) |
| 52 | #else |
| 53 | #define DEBUG_MIX(args...) |
| 54 | #endif |
| 55 | |
| 56 | /* |
| 57 | * Before touching these look how it works. It is a bit unusual I know, |
| 58 | * but it helps to keep things simple. This driver is considered complete |
| 59 | * and I won't add any new features although hardware has many cool |
| 60 | * capabilities. |
| 61 | * (Historical note: HAL2 driver was first written by Ulf Carlsson - ALSA |
| 62 | * 0.3 running with 2.2.x kernel. Then ALSA changed completely and it |
| 63 | * seemed easier to me to write OSS driver from scratch - this one. Now |
| 64 | * when ALSA is official part of 2.6 kernel it's time to write ALSA driver |
| 65 | * using (hopefully) final version of ALSA interface) |
| 66 | */ |
| 67 | #define H2_BLOCK_SIZE 1024 |
| 68 | #define H2_ADC_BUFSIZE 8192 |
| 69 | #define H2_DAC_BUFSIZE 16834 |
| 70 | |
| 71 | struct hal2_pbus { |
| 72 | struct hpc3_pbus_dmacregs *pbus; |
| 73 | int pbusnr; |
| 74 | unsigned int ctrl; /* Current state of pbus->pbdma_ctrl */ |
| 75 | }; |
| 76 | |
| 77 | struct hal2_desc { |
| 78 | struct hpc_dma_desc desc; |
| 79 | u32 cnt; /* don't touch, it is also padding */ |
| 80 | }; |
| 81 | |
| 82 | struct hal2_codec { |
| 83 | unsigned char *buffer; |
| 84 | struct hal2_desc *desc; |
| 85 | int desc_count; |
| 86 | int tail, head; /* tail index, head index */ |
| 87 | struct hal2_pbus pbus; |
| 88 | unsigned int format; /* Audio data format */ |
| 89 | int voices; /* mono/stereo */ |
| 90 | unsigned int sample_rate; |
| 91 | unsigned int master; /* Master frequency */ |
| 92 | unsigned short mod; /* MOD value */ |
| 93 | unsigned short inc; /* INC value */ |
| 94 | |
| 95 | wait_queue_head_t dma_wait; |
| 96 | spinlock_t lock; |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 97 | struct mutex sem; |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 98 | |
| 99 | int usecount; /* recording and playback are |
| 100 | * independent */ |
| 101 | }; |
| 102 | |
| 103 | #define H2_MIX_OUTPUT_ATT 0 |
| 104 | #define H2_MIX_INPUT_GAIN 1 |
| 105 | #define H2_MIXERS 2 |
| 106 | struct hal2_mixer { |
| 107 | int modcnt; |
| 108 | unsigned int master; |
| 109 | unsigned int volume[H2_MIXERS]; |
| 110 | }; |
| 111 | |
| 112 | struct hal2_card { |
| 113 | int dev_dsp; /* audio device */ |
| 114 | int dev_mixer; /* mixer device */ |
| 115 | int dev_midi; /* midi device */ |
| 116 | |
| 117 | struct hal2_ctl_regs *ctl_regs; /* HAL2 ctl registers */ |
| 118 | struct hal2_aes_regs *aes_regs; /* HAL2 aes registers */ |
| 119 | struct hal2_vol_regs *vol_regs; /* HAL2 vol registers */ |
| 120 | struct hal2_syn_regs *syn_regs; /* HAL2 syn registers */ |
| 121 | |
| 122 | struct hal2_codec dac; |
| 123 | struct hal2_codec adc; |
| 124 | struct hal2_mixer mixer; |
| 125 | }; |
| 126 | |
| 127 | #define H2_INDIRECT_WAIT(regs) while (regs->isr & H2_ISR_TSTATUS); |
| 128 | |
| 129 | #define H2_READ_ADDR(addr) (addr | (1<<7)) |
| 130 | #define H2_WRITE_ADDR(addr) (addr) |
| 131 | |
| 132 | static char *hal2str = "HAL2"; |
| 133 | |
| 134 | /* |
| 135 | * I doubt anyone has a machine with two HAL2 cards. It's possible to |
| 136 | * have two HPC's, so it is probably possible to have two HAL2 cards. |
| 137 | * Try to deal with it, but note that it is not tested. |
| 138 | */ |
| 139 | #define MAXCARDS 2 |
| 140 | static struct hal2_card* hal2_card[MAXCARDS]; |
| 141 | |
| 142 | static const struct { |
| 143 | unsigned char idx:4, avail:1; |
| 144 | } mixtable[SOUND_MIXER_NRDEVICES] = { |
| 145 | [SOUND_MIXER_PCM] = { H2_MIX_OUTPUT_ATT, 1 }, /* voice */ |
| 146 | [SOUND_MIXER_MIC] = { H2_MIX_INPUT_GAIN, 1 }, /* mic */ |
| 147 | }; |
| 148 | |
| 149 | #define H2_SUPPORTED_FORMATS (AFMT_S16_LE | AFMT_S16_BE) |
| 150 | |
| 151 | static inline void hal2_isr_write(struct hal2_card *hal2, u16 val) |
| 152 | { |
| 153 | hal2->ctl_regs->isr = val; |
| 154 | } |
| 155 | |
| 156 | static inline u16 hal2_isr_look(struct hal2_card *hal2) |
| 157 | { |
| 158 | return hal2->ctl_regs->isr; |
| 159 | } |
| 160 | |
| 161 | static inline u16 hal2_rev_look(struct hal2_card *hal2) |
| 162 | { |
| 163 | return hal2->ctl_regs->rev; |
| 164 | } |
| 165 | |
| 166 | #ifdef HAL2_DUMP_REGS |
| 167 | static u16 hal2_i_look16(struct hal2_card *hal2, u16 addr) |
| 168 | { |
| 169 | struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| 170 | |
| 171 | regs->iar = H2_READ_ADDR(addr); |
| 172 | H2_INDIRECT_WAIT(regs); |
| 173 | return regs->idr0; |
| 174 | } |
| 175 | #endif |
| 176 | |
| 177 | static u32 hal2_i_look32(struct hal2_card *hal2, u16 addr) |
| 178 | { |
| 179 | u32 ret; |
| 180 | struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| 181 | |
| 182 | regs->iar = H2_READ_ADDR(addr); |
| 183 | H2_INDIRECT_WAIT(regs); |
| 184 | ret = regs->idr0 & 0xffff; |
| 185 | regs->iar = H2_READ_ADDR(addr | 0x1); |
| 186 | H2_INDIRECT_WAIT(regs); |
| 187 | ret |= (regs->idr0 & 0xffff) << 16; |
| 188 | return ret; |
| 189 | } |
| 190 | |
| 191 | static void hal2_i_write16(struct hal2_card *hal2, u16 addr, u16 val) |
| 192 | { |
| 193 | struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| 194 | |
| 195 | regs->idr0 = val; |
| 196 | regs->idr1 = 0; |
| 197 | regs->idr2 = 0; |
| 198 | regs->idr3 = 0; |
| 199 | regs->iar = H2_WRITE_ADDR(addr); |
| 200 | H2_INDIRECT_WAIT(regs); |
| 201 | } |
| 202 | |
| 203 | static void hal2_i_write32(struct hal2_card *hal2, u16 addr, u32 val) |
| 204 | { |
| 205 | struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| 206 | |
| 207 | regs->idr0 = val & 0xffff; |
| 208 | regs->idr1 = val >> 16; |
| 209 | regs->idr2 = 0; |
| 210 | regs->idr3 = 0; |
| 211 | regs->iar = H2_WRITE_ADDR(addr); |
| 212 | H2_INDIRECT_WAIT(regs); |
| 213 | } |
| 214 | |
| 215 | static void hal2_i_setbit16(struct hal2_card *hal2, u16 addr, u16 bit) |
| 216 | { |
| 217 | struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| 218 | |
| 219 | regs->iar = H2_READ_ADDR(addr); |
| 220 | H2_INDIRECT_WAIT(regs); |
| 221 | regs->idr0 = (regs->idr0 & 0xffff) | bit; |
| 222 | regs->idr1 = 0; |
| 223 | regs->idr2 = 0; |
| 224 | regs->idr3 = 0; |
| 225 | regs->iar = H2_WRITE_ADDR(addr); |
| 226 | H2_INDIRECT_WAIT(regs); |
| 227 | } |
| 228 | |
| 229 | static void hal2_i_setbit32(struct hal2_card *hal2, u16 addr, u32 bit) |
| 230 | { |
| 231 | u32 tmp; |
| 232 | struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| 233 | |
| 234 | regs->iar = H2_READ_ADDR(addr); |
| 235 | H2_INDIRECT_WAIT(regs); |
| 236 | tmp = (regs->idr0 & 0xffff) | (regs->idr1 << 16) | bit; |
| 237 | regs->idr0 = tmp & 0xffff; |
| 238 | regs->idr1 = tmp >> 16; |
| 239 | regs->idr2 = 0; |
| 240 | regs->idr3 = 0; |
| 241 | regs->iar = H2_WRITE_ADDR(addr); |
| 242 | H2_INDIRECT_WAIT(regs); |
| 243 | } |
| 244 | |
| 245 | static void hal2_i_clearbit16(struct hal2_card *hal2, u16 addr, u16 bit) |
| 246 | { |
| 247 | struct hal2_ctl_regs *regs = hal2->ctl_regs; |
| 248 | |
| 249 | regs->iar = H2_READ_ADDR(addr); |
| 250 | H2_INDIRECT_WAIT(regs); |
| 251 | regs->idr0 = (regs->idr0 & 0xffff) & ~bit; |
| 252 | regs->idr1 = 0; |
| 253 | regs->idr2 = 0; |
| 254 | regs->idr3 = 0; |
| 255 | regs->iar = H2_WRITE_ADDR(addr); |
| 256 | H2_INDIRECT_WAIT(regs); |
| 257 | } |
| 258 | |
| 259 | #if 0 |
| 260 | static void hal2_i_clearbit32(struct hal2_card *hal2, u16 addr, u32 bit) |
| 261 | { |
| 262 | u32 tmp; |
| 263 | hal2_ctl_regs_t *regs = hal2->ctl_regs; |
| 264 | |
| 265 | regs->iar = H2_READ_ADDR(addr); |
| 266 | H2_INDIRECT_WAIT(regs); |
| 267 | tmp = ((regs->idr0 & 0xffff) | (regs->idr1 << 16)) & ~bit; |
| 268 | regs->idr0 = tmp & 0xffff; |
| 269 | regs->idr1 = tmp >> 16; |
| 270 | regs->idr2 = 0; |
| 271 | regs->idr3 = 0; |
| 272 | regs->iar = H2_WRITE_ADDR(addr); |
| 273 | H2_INDIRECT_WAIT(regs); |
| 274 | } |
| 275 | #endif |
| 276 | |
| 277 | #ifdef HAL2_DUMP_REGS |
| 278 | static void hal2_dump_regs(struct hal2_card *hal2) |
| 279 | { |
| 280 | DEBUG("isr: %08hx ", hal2_isr_look(hal2)); |
| 281 | DEBUG("rev: %08hx\n", hal2_rev_look(hal2)); |
| 282 | DEBUG("relay: %04hx\n", hal2_i_look16(hal2, H2I_RELAY_C)); |
| 283 | DEBUG("port en: %04hx ", hal2_i_look16(hal2, H2I_DMA_PORT_EN)); |
| 284 | DEBUG("dma end: %04hx ", hal2_i_look16(hal2, H2I_DMA_END)); |
| 285 | DEBUG("dma drv: %04hx\n", hal2_i_look16(hal2, H2I_DMA_DRV)); |
| 286 | DEBUG("syn ctl: %04hx ", hal2_i_look16(hal2, H2I_SYNTH_C)); |
| 287 | DEBUG("aesrx ctl: %04hx ", hal2_i_look16(hal2, H2I_AESRX_C)); |
| 288 | DEBUG("aestx ctl: %04hx ", hal2_i_look16(hal2, H2I_AESTX_C)); |
| 289 | DEBUG("dac ctl1: %04hx ", hal2_i_look16(hal2, H2I_ADC_C1)); |
| 290 | DEBUG("dac ctl2: %08x ", hal2_i_look32(hal2, H2I_ADC_C2)); |
| 291 | DEBUG("adc ctl1: %04hx ", hal2_i_look16(hal2, H2I_DAC_C1)); |
| 292 | DEBUG("adc ctl2: %08x ", hal2_i_look32(hal2, H2I_DAC_C2)); |
| 293 | DEBUG("syn map: %04hx\n", hal2_i_look16(hal2, H2I_SYNTH_MAP_C)); |
| 294 | DEBUG("bres1 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES1_C1)); |
| 295 | DEBUG("bres1 ctl2: %04x ", hal2_i_look32(hal2, H2I_BRES1_C2)); |
| 296 | DEBUG("bres2 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES2_C1)); |
| 297 | DEBUG("bres2 ctl2: %04x ", hal2_i_look32(hal2, H2I_BRES2_C2)); |
| 298 | DEBUG("bres3 ctl1: %04hx ", hal2_i_look16(hal2, H2I_BRES3_C1)); |
| 299 | DEBUG("bres3 ctl2: %04x\n", hal2_i_look32(hal2, H2I_BRES3_C2)); |
| 300 | } |
| 301 | #endif |
| 302 | |
| 303 | static struct hal2_card* hal2_dsp_find_card(int minor) |
| 304 | { |
| 305 | int i; |
| 306 | |
| 307 | for (i = 0; i < MAXCARDS; i++) |
| 308 | if (hal2_card[i] != NULL && hal2_card[i]->dev_dsp == minor) |
| 309 | return hal2_card[i]; |
| 310 | return NULL; |
| 311 | } |
| 312 | |
| 313 | static struct hal2_card* hal2_mixer_find_card(int minor) |
| 314 | { |
| 315 | int i; |
| 316 | |
| 317 | for (i = 0; i < MAXCARDS; i++) |
| 318 | if (hal2_card[i] != NULL && hal2_card[i]->dev_mixer == minor) |
| 319 | return hal2_card[i]; |
| 320 | return NULL; |
| 321 | } |
| 322 | |
| 323 | static void hal2_inc_head(struct hal2_codec *codec) |
| 324 | { |
| 325 | codec->head++; |
| 326 | if (codec->head == codec->desc_count) |
| 327 | codec->head = 0; |
| 328 | } |
| 329 | |
| 330 | static void hal2_inc_tail(struct hal2_codec *codec) |
| 331 | { |
| 332 | codec->tail++; |
| 333 | if (codec->tail == codec->desc_count) |
| 334 | codec->tail = 0; |
| 335 | } |
| 336 | |
| 337 | static void hal2_dac_interrupt(struct hal2_codec *dac) |
| 338 | { |
| 339 | int running; |
| 340 | |
| 341 | spin_lock(&dac->lock); |
| 342 | /* if tail buffer contains zero samples DMA stream was already |
| 343 | * stopped */ |
| 344 | running = dac->desc[dac->tail].cnt; |
| 345 | dac->desc[dac->tail].cnt = 0; |
| 346 | dac->desc[dac->tail].desc.cntinfo = HPCDMA_XIE | HPCDMA_EOX; |
| 347 | /* we just proccessed empty buffer, don't update tail pointer */ |
| 348 | if (running) |
| 349 | hal2_inc_tail(dac); |
| 350 | spin_unlock(&dac->lock); |
| 351 | |
| 352 | wake_up(&dac->dma_wait); |
| 353 | } |
| 354 | |
| 355 | static void hal2_adc_interrupt(struct hal2_codec *adc) |
| 356 | { |
| 357 | int running; |
| 358 | |
| 359 | spin_lock(&adc->lock); |
| 360 | /* if head buffer contains nonzero samples DMA stream was already |
| 361 | * stopped */ |
| 362 | running = !adc->desc[adc->head].cnt; |
| 363 | adc->desc[adc->head].cnt = H2_BLOCK_SIZE; |
| 364 | adc->desc[adc->head].desc.cntinfo = HPCDMA_XIE | HPCDMA_EOR; |
| 365 | /* we just proccessed empty buffer, don't update head pointer */ |
| 366 | if (running) |
| 367 | hal2_inc_head(adc); |
| 368 | spin_unlock(&adc->lock); |
| 369 | |
| 370 | wake_up(&adc->dma_wait); |
| 371 | } |
| 372 | |
David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame^] | 373 | static irqreturn_t hal2_interrupt(int irq, void *dev_id) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 374 | { |
| 375 | struct hal2_card *hal2 = (struct hal2_card*)dev_id; |
| 376 | irqreturn_t ret = IRQ_NONE; |
| 377 | |
| 378 | /* decide what caused this interrupt */ |
| 379 | if (hal2->dac.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) { |
| 380 | hal2_dac_interrupt(&hal2->dac); |
| 381 | ret = IRQ_HANDLED; |
| 382 | } |
| 383 | if (hal2->adc.pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_INT) { |
| 384 | hal2_adc_interrupt(&hal2->adc); |
| 385 | ret = IRQ_HANDLED; |
| 386 | } |
| 387 | return ret; |
| 388 | } |
| 389 | |
| 390 | static int hal2_compute_rate(struct hal2_codec *codec, unsigned int rate) |
| 391 | { |
| 392 | unsigned short mod; |
| 393 | |
| 394 | DEBUG("rate: %d\n", rate); |
| 395 | |
| 396 | if (rate < 4000) rate = 4000; |
| 397 | else if (rate > 48000) rate = 48000; |
| 398 | |
| 399 | if (44100 % rate < 48000 % rate) { |
| 400 | mod = 4 * 44100 / rate; |
| 401 | codec->master = 44100; |
| 402 | } else { |
| 403 | mod = 4 * 48000 / rate; |
| 404 | codec->master = 48000; |
| 405 | } |
| 406 | |
| 407 | codec->inc = 4; |
| 408 | codec->mod = mod; |
| 409 | rate = 4 * codec->master / mod; |
| 410 | |
| 411 | DEBUG("real_rate: %d\n", rate); |
| 412 | |
| 413 | return rate; |
| 414 | } |
| 415 | |
| 416 | static void hal2_set_dac_rate(struct hal2_card *hal2) |
| 417 | { |
| 418 | unsigned int master = hal2->dac.master; |
| 419 | int inc = hal2->dac.inc; |
| 420 | int mod = hal2->dac.mod; |
| 421 | |
| 422 | DEBUG("master: %d inc: %d mod: %d\n", master, inc, mod); |
| 423 | |
| 424 | hal2_i_write16(hal2, H2I_BRES1_C1, (master == 44100) ? 1 : 0); |
| 425 | hal2_i_write32(hal2, H2I_BRES1_C2, ((0xffff & (inc - mod - 1)) << 16) | inc); |
| 426 | } |
| 427 | |
| 428 | static void hal2_set_adc_rate(struct hal2_card *hal2) |
| 429 | { |
| 430 | unsigned int master = hal2->adc.master; |
| 431 | int inc = hal2->adc.inc; |
| 432 | int mod = hal2->adc.mod; |
| 433 | |
| 434 | DEBUG("master: %d inc: %d mod: %d\n", master, inc, mod); |
| 435 | |
| 436 | hal2_i_write16(hal2, H2I_BRES2_C1, (master == 44100) ? 1 : 0); |
| 437 | hal2_i_write32(hal2, H2I_BRES2_C2, ((0xffff & (inc - mod - 1)) << 16) | inc); |
| 438 | } |
| 439 | |
| 440 | static void hal2_setup_dac(struct hal2_card *hal2) |
| 441 | { |
| 442 | unsigned int fifobeg, fifoend, highwater, sample_size; |
| 443 | struct hal2_pbus *pbus = &hal2->dac.pbus; |
| 444 | |
| 445 | DEBUG("hal2_setup_dac\n"); |
| 446 | |
| 447 | /* Now we set up some PBUS information. The PBUS needs information about |
| 448 | * what portion of the fifo it will use. If it's receiving or |
| 449 | * transmitting, and finally whether the stream is little endian or big |
| 450 | * endian. The information is written later, on the start call. |
| 451 | */ |
| 452 | sample_size = 2 * hal2->dac.voices; |
| 453 | /* Fifo should be set to hold exactly four samples. Highwater mark |
| 454 | * should be set to two samples. */ |
| 455 | highwater = (sample_size * 2) >> 1; /* halfwords */ |
| 456 | fifobeg = 0; /* playback is first */ |
| 457 | fifoend = (sample_size * 4) >> 3; /* doublewords */ |
| 458 | pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_LD | |
| 459 | (highwater << 8) | (fifobeg << 16) | (fifoend << 24) | |
| 460 | (hal2->dac.format & AFMT_S16_LE ? HPC3_PDMACTRL_SEL : 0); |
| 461 | /* We disable everything before we do anything at all */ |
| 462 | pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; |
| 463 | hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX); |
| 464 | /* Setup the HAL2 for playback */ |
| 465 | hal2_set_dac_rate(hal2); |
| 466 | /* Set endianess */ |
| 467 | if (hal2->dac.format & AFMT_S16_LE) |
| 468 | hal2_i_setbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX); |
| 469 | else |
| 470 | hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECTX); |
| 471 | /* Set DMA bus */ |
| 472 | hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr)); |
| 473 | /* We are using 1st Bresenham clock generator for playback */ |
| 474 | hal2_i_write16(hal2, H2I_DAC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT) |
| 475 | | (1 << H2I_C1_CLKID_SHIFT) |
| 476 | | (hal2->dac.voices << H2I_C1_DATAT_SHIFT)); |
| 477 | } |
| 478 | |
| 479 | static void hal2_setup_adc(struct hal2_card *hal2) |
| 480 | { |
| 481 | unsigned int fifobeg, fifoend, highwater, sample_size; |
| 482 | struct hal2_pbus *pbus = &hal2->adc.pbus; |
| 483 | |
| 484 | DEBUG("hal2_setup_adc\n"); |
| 485 | |
| 486 | sample_size = 2 * hal2->adc.voices; |
| 487 | highwater = (sample_size * 2) >> 1; /* halfwords */ |
| 488 | fifobeg = (4 * 4) >> 3; /* record is second */ |
| 489 | fifoend = (4 * 4 + sample_size * 4) >> 3; /* doublewords */ |
| 490 | pbus->ctrl = HPC3_PDMACTRL_RT | HPC3_PDMACTRL_RCV | HPC3_PDMACTRL_LD | |
| 491 | (highwater << 8) | (fifobeg << 16) | (fifoend << 24) | |
| 492 | (hal2->adc.format & AFMT_S16_LE ? HPC3_PDMACTRL_SEL : 0); |
| 493 | pbus->pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; |
| 494 | hal2_i_clearbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR); |
| 495 | /* Setup the HAL2 for record */ |
| 496 | hal2_set_adc_rate(hal2); |
| 497 | /* Set endianess */ |
| 498 | if (hal2->adc.format & AFMT_S16_LE) |
| 499 | hal2_i_setbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR); |
| 500 | else |
| 501 | hal2_i_clearbit16(hal2, H2I_DMA_END, H2I_DMA_END_CODECR); |
| 502 | /* Set DMA bus */ |
| 503 | hal2_i_setbit16(hal2, H2I_DMA_DRV, (1 << pbus->pbusnr)); |
| 504 | /* We are using 2nd Bresenham clock generator for record */ |
| 505 | hal2_i_write16(hal2, H2I_ADC_C1, (pbus->pbusnr << H2I_C1_DMA_SHIFT) |
| 506 | | (2 << H2I_C1_CLKID_SHIFT) |
| 507 | | (hal2->adc.voices << H2I_C1_DATAT_SHIFT)); |
| 508 | } |
| 509 | |
| 510 | static dma_addr_t hal2_desc_addr(struct hal2_codec *codec, int i) |
| 511 | { |
| 512 | if (--i < 0) |
| 513 | i = codec->desc_count - 1; |
| 514 | return codec->desc[i].desc.pnext; |
| 515 | } |
| 516 | |
| 517 | static void hal2_start_dac(struct hal2_card *hal2) |
| 518 | { |
| 519 | struct hal2_codec *dac = &hal2->dac; |
| 520 | struct hal2_pbus *pbus = &dac->pbus; |
| 521 | |
| 522 | pbus->pbus->pbdma_dptr = hal2_desc_addr(dac, dac->tail); |
| 523 | pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT; |
| 524 | /* enable DAC */ |
| 525 | hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECTX); |
| 526 | } |
| 527 | |
| 528 | static void hal2_start_adc(struct hal2_card *hal2) |
| 529 | { |
| 530 | struct hal2_codec *adc = &hal2->adc; |
| 531 | struct hal2_pbus *pbus = &adc->pbus; |
| 532 | |
| 533 | pbus->pbus->pbdma_dptr = hal2_desc_addr(adc, adc->head); |
| 534 | pbus->pbus->pbdma_ctrl = pbus->ctrl | HPC3_PDMACTRL_ACT; |
| 535 | /* enable ADC */ |
| 536 | hal2_i_setbit16(hal2, H2I_DMA_PORT_EN, H2I_DMA_PORT_EN_CODECR); |
| 537 | } |
| 538 | |
| 539 | static inline void hal2_stop_dac(struct hal2_card *hal2) |
| 540 | { |
| 541 | hal2->dac.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; |
| 542 | /* The HAL2 itself may remain enabled safely */ |
| 543 | } |
| 544 | |
| 545 | static inline void hal2_stop_adc(struct hal2_card *hal2) |
| 546 | { |
| 547 | hal2->adc.pbus.pbus->pbdma_ctrl = HPC3_PDMACTRL_LD; |
| 548 | } |
| 549 | |
| 550 | static int hal2_alloc_dmabuf(struct hal2_codec *codec, int size, |
| 551 | int count, int cntinfo, int dir) |
| 552 | { |
| 553 | struct hal2_desc *desc, *dma_addr; |
| 554 | int i; |
| 555 | |
| 556 | DEBUG("allocating %dk DMA buffer.\n", size / 1024); |
| 557 | |
| 558 | codec->buffer = (unsigned char *)__get_free_pages(GFP_KERNEL | GFP_DMA, |
| 559 | get_order(size)); |
| 560 | if (!codec->buffer) |
| 561 | return -ENOMEM; |
| 562 | desc = dma_alloc_coherent(NULL, count * sizeof(struct hal2_desc), |
| 563 | (dma_addr_t *)&dma_addr, GFP_KERNEL); |
| 564 | if (!desc) { |
| 565 | free_pages((unsigned long)codec->buffer, get_order(size)); |
| 566 | return -ENOMEM; |
| 567 | } |
| 568 | codec->desc = desc; |
| 569 | for (i = 0; i < count; i++) { |
| 570 | desc->desc.pbuf = dma_map_single(NULL, |
| 571 | (void *)(codec->buffer + i * H2_BLOCK_SIZE), |
| 572 | H2_BLOCK_SIZE, dir); |
| 573 | desc->desc.cntinfo = cntinfo; |
| 574 | desc->desc.pnext = (i == count - 1) ? |
| 575 | (u32)dma_addr : (u32)(dma_addr + i + 1); |
| 576 | desc->cnt = 0; |
| 577 | desc++; |
| 578 | } |
| 579 | codec->desc_count = count; |
| 580 | codec->head = codec->tail = 0; |
| 581 | return 0; |
| 582 | } |
| 583 | |
| 584 | static int hal2_alloc_dac_dmabuf(struct hal2_codec *codec) |
| 585 | { |
| 586 | return hal2_alloc_dmabuf(codec, H2_DAC_BUFSIZE, |
| 587 | H2_DAC_BUFSIZE / H2_BLOCK_SIZE, |
| 588 | HPCDMA_XIE | HPCDMA_EOX, |
| 589 | DMA_TO_DEVICE); |
| 590 | } |
| 591 | |
| 592 | static int hal2_alloc_adc_dmabuf(struct hal2_codec *codec) |
| 593 | { |
| 594 | return hal2_alloc_dmabuf(codec, H2_ADC_BUFSIZE, |
| 595 | H2_ADC_BUFSIZE / H2_BLOCK_SIZE, |
| 596 | HPCDMA_XIE | H2_BLOCK_SIZE, |
| 597 | DMA_TO_DEVICE); |
| 598 | } |
| 599 | |
| 600 | static void hal2_free_dmabuf(struct hal2_codec *codec, int size, int dir) |
| 601 | { |
| 602 | dma_addr_t dma_addr; |
| 603 | int i; |
| 604 | |
| 605 | dma_addr = codec->desc[codec->desc_count - 1].desc.pnext; |
| 606 | for (i = 0; i < codec->desc_count; i++) |
| 607 | dma_unmap_single(NULL, codec->desc[i].desc.pbuf, |
| 608 | H2_BLOCK_SIZE, dir); |
| 609 | dma_free_coherent(NULL, codec->desc_count * sizeof(struct hal2_desc), |
| 610 | (void *)codec->desc, dma_addr); |
| 611 | free_pages((unsigned long)codec->buffer, get_order(size)); |
| 612 | } |
| 613 | |
| 614 | static void hal2_free_dac_dmabuf(struct hal2_codec *codec) |
| 615 | { |
| 616 | return hal2_free_dmabuf(codec, H2_DAC_BUFSIZE, DMA_TO_DEVICE); |
| 617 | } |
| 618 | |
| 619 | static void hal2_free_adc_dmabuf(struct hal2_codec *codec) |
| 620 | { |
| 621 | return hal2_free_dmabuf(codec, H2_ADC_BUFSIZE, DMA_FROM_DEVICE); |
| 622 | } |
| 623 | |
| 624 | /* |
| 625 | * Add 'count' bytes to 'buffer' from DMA ring buffers. Return number of |
| 626 | * bytes added or -EFAULT if copy_from_user failed. |
| 627 | */ |
| 628 | static int hal2_get_buffer(struct hal2_card *hal2, char *buffer, int count) |
| 629 | { |
| 630 | unsigned long flags; |
| 631 | int size, ret = 0; |
| 632 | unsigned char *buf; |
| 633 | struct hal2_desc *tail; |
| 634 | struct hal2_codec *adc = &hal2->adc; |
| 635 | |
| 636 | DEBUG("getting %d bytes ", count); |
| 637 | |
| 638 | spin_lock_irqsave(&adc->lock, flags); |
| 639 | tail = &adc->desc[adc->tail]; |
| 640 | /* enable DMA stream if there are no data */ |
| 641 | if (!tail->cnt && !(adc->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT)) |
| 642 | hal2_start_adc(hal2); |
| 643 | while (tail->cnt > 0 && count > 0) { |
| 644 | size = min((int)tail->cnt, count); |
| 645 | buf = &adc->buffer[(adc->tail + 1) * H2_BLOCK_SIZE - tail->cnt]; |
| 646 | spin_unlock_irqrestore(&adc->lock, flags); |
| 647 | dma_sync_single(NULL, tail->desc.pbuf, size, DMA_FROM_DEVICE); |
| 648 | if (copy_to_user(buffer, buf, size)) { |
| 649 | ret = -EFAULT; |
| 650 | goto out; |
| 651 | } |
| 652 | spin_lock_irqsave(&adc->lock, flags); |
| 653 | tail->cnt -= size; |
| 654 | /* buffer is empty, update tail pointer */ |
| 655 | if (tail->cnt == 0) { |
| 656 | tail->desc.cntinfo = HPCDMA_XIE | H2_BLOCK_SIZE; |
| 657 | hal2_inc_tail(adc); |
| 658 | tail = &adc->desc[adc->tail]; |
| 659 | /* enable DMA stream again if needed */ |
| 660 | if (!(adc->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT)) |
| 661 | hal2_start_adc(hal2); |
| 662 | } |
| 663 | buffer += size; |
| 664 | ret += size; |
| 665 | count -= size; |
| 666 | |
| 667 | DEBUG("(%d) ", size); |
| 668 | } |
| 669 | spin_unlock_irqrestore(&adc->lock, flags); |
| 670 | out: |
| 671 | DEBUG("\n"); |
| 672 | |
| 673 | return ret; |
| 674 | } |
| 675 | |
| 676 | /* |
| 677 | * Add 'count' bytes from 'buffer' to DMA ring buffers. Return number of |
| 678 | * bytes added or -EFAULT if copy_from_user failed. |
| 679 | */ |
| 680 | static int hal2_add_buffer(struct hal2_card *hal2, char *buffer, int count) |
| 681 | { |
| 682 | unsigned long flags; |
| 683 | unsigned char *buf; |
| 684 | int size, ret = 0; |
| 685 | struct hal2_desc *head; |
| 686 | struct hal2_codec *dac = &hal2->dac; |
| 687 | |
| 688 | DEBUG("adding %d bytes ", count); |
| 689 | |
| 690 | spin_lock_irqsave(&dac->lock, flags); |
| 691 | head = &dac->desc[dac->head]; |
| 692 | while (head->cnt == 0 && count > 0) { |
| 693 | size = min((int)H2_BLOCK_SIZE, count); |
| 694 | buf = &dac->buffer[dac->head * H2_BLOCK_SIZE]; |
| 695 | spin_unlock_irqrestore(&dac->lock, flags); |
| 696 | if (copy_from_user(buf, buffer, size)) { |
| 697 | ret = -EFAULT; |
| 698 | goto out; |
| 699 | } |
| 700 | dma_sync_single(NULL, head->desc.pbuf, size, DMA_TO_DEVICE); |
| 701 | spin_lock_irqsave(&dac->lock, flags); |
| 702 | head->desc.cntinfo = size | HPCDMA_XIE; |
| 703 | head->cnt = size; |
| 704 | buffer += size; |
| 705 | ret += size; |
| 706 | count -= size; |
| 707 | hal2_inc_head(dac); |
| 708 | head = &dac->desc[dac->head]; |
| 709 | |
| 710 | DEBUG("(%d) ", size); |
| 711 | } |
| 712 | if (!(dac->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT) && ret > 0) |
| 713 | hal2_start_dac(hal2); |
| 714 | spin_unlock_irqrestore(&dac->lock, flags); |
| 715 | out: |
| 716 | DEBUG("\n"); |
| 717 | |
| 718 | return ret; |
| 719 | } |
| 720 | |
| 721 | #define hal2_reset_dac_pointer(hal2) hal2_reset_pointer(hal2, 1) |
| 722 | #define hal2_reset_adc_pointer(hal2) hal2_reset_pointer(hal2, 0) |
| 723 | static void hal2_reset_pointer(struct hal2_card *hal2, int is_dac) |
| 724 | { |
| 725 | int i; |
| 726 | struct hal2_codec *codec = (is_dac) ? &hal2->dac : &hal2->adc; |
| 727 | |
| 728 | DEBUG("hal2_reset_pointer\n"); |
| 729 | |
| 730 | for (i = 0; i < codec->desc_count; i++) { |
| 731 | codec->desc[i].cnt = 0; |
| 732 | codec->desc[i].desc.cntinfo = HPCDMA_XIE | (is_dac) ? |
| 733 | HPCDMA_EOX : H2_BLOCK_SIZE; |
| 734 | } |
| 735 | codec->head = codec->tail = 0; |
| 736 | } |
| 737 | |
| 738 | static int hal2_sync_dac(struct hal2_card *hal2) |
| 739 | { |
| 740 | DECLARE_WAITQUEUE(wait, current); |
| 741 | struct hal2_codec *dac = &hal2->dac; |
| 742 | int ret = 0; |
| 743 | unsigned long flags; |
| 744 | signed long timeout = 1000 * H2_BLOCK_SIZE * 2 * dac->voices * |
| 745 | HZ / dac->sample_rate / 900; |
| 746 | |
| 747 | while (dac->pbus.pbus->pbdma_ctrl & HPC3_PDMACTRL_ISACT) { |
| 748 | add_wait_queue(&dac->dma_wait, &wait); |
| 749 | set_current_state(TASK_INTERRUPTIBLE); |
| 750 | schedule_timeout(timeout); |
| 751 | spin_lock_irqsave(&dac->lock, flags); |
| 752 | if (dac->desc[dac->tail].cnt) |
| 753 | ret = -ETIME; |
| 754 | spin_unlock_irqrestore(&dac->lock, flags); |
| 755 | if (signal_pending(current)) |
| 756 | ret = -ERESTARTSYS; |
| 757 | if (ret) { |
| 758 | hal2_stop_dac(hal2); |
| 759 | hal2_reset_dac_pointer(hal2); |
| 760 | } |
| 761 | remove_wait_queue(&dac->dma_wait, &wait); |
| 762 | } |
| 763 | |
| 764 | return ret; |
| 765 | } |
| 766 | |
| 767 | static int hal2_write_mixer(struct hal2_card *hal2, int index, int vol) |
| 768 | { |
| 769 | unsigned int l, r, tmp; |
| 770 | |
| 771 | DEBUG_MIX("mixer %d write\n", index); |
| 772 | |
| 773 | if (index >= SOUND_MIXER_NRDEVICES || !mixtable[index].avail) |
| 774 | return -EINVAL; |
| 775 | |
| 776 | r = (vol >> 8) & 0xff; |
| 777 | if (r > 100) |
| 778 | r = 100; |
| 779 | l = vol & 0xff; |
| 780 | if (l > 100) |
| 781 | l = 100; |
| 782 | |
| 783 | hal2->mixer.volume[mixtable[index].idx] = l | (r << 8); |
| 784 | |
| 785 | switch (mixtable[index].idx) { |
| 786 | case H2_MIX_OUTPUT_ATT: |
| 787 | |
| 788 | DEBUG_MIX("output attenuator %d,%d\n", l, r); |
| 789 | |
| 790 | if (r | l) { |
| 791 | tmp = hal2_i_look32(hal2, H2I_DAC_C2); |
| 792 | tmp &= ~(H2I_C2_L_ATT_M | H2I_C2_R_ATT_M | H2I_C2_MUTE); |
| 793 | |
| 794 | /* Attenuator has five bits */ |
| 795 | l = 31 * (100 - l) / 99; |
| 796 | r = 31 * (100 - r) / 99; |
| 797 | |
| 798 | DEBUG_MIX("left: %d, right %d\n", l, r); |
| 799 | |
| 800 | tmp |= (l << H2I_C2_L_ATT_SHIFT) & H2I_C2_L_ATT_M; |
| 801 | tmp |= (r << H2I_C2_R_ATT_SHIFT) & H2I_C2_R_ATT_M; |
| 802 | hal2_i_write32(hal2, H2I_DAC_C2, tmp); |
| 803 | } else |
| 804 | hal2_i_setbit32(hal2, H2I_DAC_C2, H2I_C2_MUTE); |
| 805 | break; |
| 806 | case H2_MIX_INPUT_GAIN: |
| 807 | |
| 808 | DEBUG_MIX("input gain %d,%d\n", l, r); |
| 809 | |
| 810 | tmp = hal2_i_look32(hal2, H2I_ADC_C2); |
| 811 | tmp &= ~(H2I_C2_L_GAIN_M | H2I_C2_R_GAIN_M); |
| 812 | |
| 813 | /* Gain control has four bits */ |
| 814 | l = 16 * l / 100; |
| 815 | r = 16 * r / 100; |
| 816 | |
| 817 | DEBUG_MIX("left: %d, right %d\n", l, r); |
| 818 | |
| 819 | tmp |= (l << H2I_C2_L_GAIN_SHIFT) & H2I_C2_L_GAIN_M; |
| 820 | tmp |= (r << H2I_C2_R_GAIN_SHIFT) & H2I_C2_R_GAIN_M; |
| 821 | hal2_i_write32(hal2, H2I_ADC_C2, tmp); |
| 822 | |
| 823 | break; |
| 824 | } |
| 825 | |
| 826 | return 0; |
| 827 | } |
| 828 | |
| 829 | static void hal2_init_mixer(struct hal2_card *hal2) |
| 830 | { |
| 831 | int i; |
| 832 | |
| 833 | for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) |
| 834 | if (mixtable[i].avail) |
| 835 | hal2->mixer.volume[mixtable[i].idx] = 100 | (100 << 8); |
| 836 | |
| 837 | /* disable attenuator */ |
| 838 | hal2_i_write32(hal2, H2I_DAC_C2, 0); |
| 839 | /* set max input gain */ |
| 840 | hal2_i_write32(hal2, H2I_ADC_C2, H2I_C2_MUTE | |
| 841 | (H2I_C2_L_GAIN_M << H2I_C2_L_GAIN_SHIFT) | |
| 842 | (H2I_C2_R_GAIN_M << H2I_C2_R_GAIN_SHIFT)); |
| 843 | /* set max volume */ |
| 844 | hal2->mixer.master = 0xff; |
| 845 | hal2->vol_regs->left = 0xff; |
| 846 | hal2->vol_regs->right = 0xff; |
| 847 | } |
| 848 | |
| 849 | /* |
| 850 | * XXX: later i'll implement mixer for main volume which will be disabled |
| 851 | * by default. enabling it users will be allowed to have master volume level |
| 852 | * control on panel in their favourite X desktop |
| 853 | */ |
| 854 | static void hal2_volume_control(int direction) |
| 855 | { |
| 856 | unsigned int master = hal2_card[0]->mixer.master; |
| 857 | struct hal2_vol_regs *vol = hal2_card[0]->vol_regs; |
| 858 | |
| 859 | /* volume up */ |
| 860 | if (direction > 0 && master < 0xff) |
| 861 | master++; |
| 862 | /* volume down */ |
| 863 | else if (direction < 0 && master > 0) |
| 864 | master--; |
| 865 | /* TODO: mute/unmute */ |
| 866 | vol->left = master; |
| 867 | vol->right = master; |
| 868 | hal2_card[0]->mixer.master = master; |
| 869 | } |
| 870 | |
| 871 | static int hal2_mixer_ioctl(struct hal2_card *hal2, unsigned int cmd, |
| 872 | unsigned long arg) |
| 873 | { |
| 874 | int val; |
| 875 | |
| 876 | if (cmd == SOUND_MIXER_INFO) { |
| 877 | mixer_info info; |
| 878 | |
| 879 | memset(&info, 0, sizeof(info)); |
| 880 | strlcpy(info.id, hal2str, sizeof(info.id)); |
| 881 | strlcpy(info.name, hal2str, sizeof(info.name)); |
| 882 | info.modify_counter = hal2->mixer.modcnt; |
| 883 | if (copy_to_user((void *)arg, &info, sizeof(info))) |
| 884 | return -EFAULT; |
| 885 | return 0; |
| 886 | } |
| 887 | if (cmd == SOUND_OLD_MIXER_INFO) { |
| 888 | _old_mixer_info info; |
| 889 | |
| 890 | memset(&info, 0, sizeof(info)); |
| 891 | strlcpy(info.id, hal2str, sizeof(info.id)); |
| 892 | strlcpy(info.name, hal2str, sizeof(info.name)); |
| 893 | if (copy_to_user((void *)arg, &info, sizeof(info))) |
| 894 | return -EFAULT; |
| 895 | return 0; |
| 896 | } |
| 897 | if (cmd == OSS_GETVERSION) |
| 898 | return put_user(SOUND_VERSION, (int *)arg); |
| 899 | |
| 900 | if (_IOC_TYPE(cmd) != 'M' || _IOC_SIZE(cmd) != sizeof(int)) |
| 901 | return -EINVAL; |
| 902 | |
| 903 | if (_IOC_DIR(cmd) == _IOC_READ) { |
| 904 | switch (_IOC_NR(cmd)) { |
| 905 | /* Give the current record source */ |
| 906 | case SOUND_MIXER_RECSRC: |
| 907 | val = 0; /* FIXME */ |
| 908 | break; |
| 909 | /* Give the supported mixers, all of them support stereo */ |
| 910 | case SOUND_MIXER_DEVMASK: |
| 911 | case SOUND_MIXER_STEREODEVS: { |
| 912 | int i; |
| 913 | |
| 914 | for (val = i = 0; i < SOUND_MIXER_NRDEVICES; i++) |
| 915 | if (mixtable[i].avail) |
| 916 | val |= 1 << i; |
| 917 | break; |
| 918 | } |
| 919 | /* Arg contains a bit for each supported recording source */ |
| 920 | case SOUND_MIXER_RECMASK: |
| 921 | val = 0; |
| 922 | break; |
| 923 | case SOUND_MIXER_CAPS: |
| 924 | val = 0; |
| 925 | break; |
| 926 | /* Read a specific mixer */ |
| 927 | default: { |
| 928 | int i = _IOC_NR(cmd); |
| 929 | |
| 930 | if (i >= SOUND_MIXER_NRDEVICES || !mixtable[i].avail) |
| 931 | return -EINVAL; |
| 932 | val = hal2->mixer.volume[mixtable[i].idx]; |
| 933 | break; |
| 934 | } |
| 935 | } |
| 936 | return put_user(val, (int *)arg); |
| 937 | } |
| 938 | |
| 939 | if (_IOC_DIR(cmd) != (_IOC_WRITE|_IOC_READ)) |
| 940 | return -EINVAL; |
| 941 | |
| 942 | hal2->mixer.modcnt++; |
| 943 | |
| 944 | if (get_user(val, (int *)arg)) |
| 945 | return -EFAULT; |
| 946 | |
| 947 | switch (_IOC_NR(cmd)) { |
| 948 | /* Arg contains a bit for each recording source */ |
| 949 | case SOUND_MIXER_RECSRC: |
| 950 | return 0; /* FIXME */ |
| 951 | default: |
| 952 | return hal2_write_mixer(hal2, _IOC_NR(cmd), val); |
| 953 | } |
| 954 | |
| 955 | return 0; |
| 956 | } |
| 957 | |
| 958 | static int hal2_open_mixdev(struct inode *inode, struct file *file) |
| 959 | { |
| 960 | struct hal2_card *hal2 = hal2_mixer_find_card(iminor(inode)); |
| 961 | |
| 962 | if (hal2) { |
| 963 | file->private_data = hal2; |
| 964 | return nonseekable_open(inode, file); |
| 965 | } |
| 966 | return -ENODEV; |
| 967 | } |
| 968 | |
| 969 | static int hal2_release_mixdev(struct inode *inode, struct file *file) |
| 970 | { |
| 971 | return 0; |
| 972 | } |
| 973 | |
| 974 | static int hal2_ioctl_mixdev(struct inode *inode, struct file *file, |
| 975 | unsigned int cmd, unsigned long arg) |
| 976 | { |
| 977 | return hal2_mixer_ioctl((struct hal2_card *)file->private_data, cmd, arg); |
| 978 | } |
| 979 | |
| 980 | static int hal2_ioctl(struct inode *inode, struct file *file, |
| 981 | unsigned int cmd, unsigned long arg) |
| 982 | { |
| 983 | int val; |
| 984 | struct hal2_card *hal2 = (struct hal2_card *) file->private_data; |
| 985 | |
| 986 | switch (cmd) { |
| 987 | case OSS_GETVERSION: |
| 988 | return put_user(SOUND_VERSION, (int *)arg); |
| 989 | |
| 990 | case SNDCTL_DSP_SYNC: |
| 991 | if (file->f_mode & FMODE_WRITE) |
| 992 | return hal2_sync_dac(hal2); |
| 993 | return 0; |
| 994 | |
| 995 | case SNDCTL_DSP_SETDUPLEX: |
| 996 | return 0; |
| 997 | |
| 998 | case SNDCTL_DSP_GETCAPS: |
| 999 | return put_user(DSP_CAP_DUPLEX | DSP_CAP_MULTI, (int *)arg); |
| 1000 | |
| 1001 | case SNDCTL_DSP_RESET: |
| 1002 | if (file->f_mode & FMODE_READ) { |
| 1003 | hal2_stop_adc(hal2); |
| 1004 | hal2_reset_adc_pointer(hal2); |
| 1005 | } |
| 1006 | if (file->f_mode & FMODE_WRITE) { |
| 1007 | hal2_stop_dac(hal2); |
| 1008 | hal2_reset_dac_pointer(hal2); |
| 1009 | } |
| 1010 | return 0; |
| 1011 | |
| 1012 | case SNDCTL_DSP_SPEED: |
| 1013 | if (get_user(val, (int *)arg)) |
| 1014 | return -EFAULT; |
| 1015 | if (file->f_mode & FMODE_READ) { |
| 1016 | hal2_stop_adc(hal2); |
| 1017 | val = hal2_compute_rate(&hal2->adc, val); |
| 1018 | hal2->adc.sample_rate = val; |
| 1019 | hal2_set_adc_rate(hal2); |
| 1020 | } |
| 1021 | if (file->f_mode & FMODE_WRITE) { |
| 1022 | hal2_stop_dac(hal2); |
| 1023 | val = hal2_compute_rate(&hal2->dac, val); |
| 1024 | hal2->dac.sample_rate = val; |
| 1025 | hal2_set_dac_rate(hal2); |
| 1026 | } |
| 1027 | return put_user(val, (int *)arg); |
| 1028 | |
| 1029 | case SNDCTL_DSP_STEREO: |
| 1030 | if (get_user(val, (int *)arg)) |
| 1031 | return -EFAULT; |
| 1032 | if (file->f_mode & FMODE_READ) { |
| 1033 | hal2_stop_adc(hal2); |
| 1034 | hal2->adc.voices = (val) ? 2 : 1; |
| 1035 | hal2_setup_adc(hal2); |
| 1036 | } |
| 1037 | if (file->f_mode & FMODE_WRITE) { |
| 1038 | hal2_stop_dac(hal2); |
| 1039 | hal2->dac.voices = (val) ? 2 : 1; |
| 1040 | hal2_setup_dac(hal2); |
| 1041 | } |
| 1042 | return 0; |
| 1043 | |
| 1044 | case SNDCTL_DSP_CHANNELS: |
| 1045 | if (get_user(val, (int *)arg)) |
| 1046 | return -EFAULT; |
| 1047 | if (val != 0) { |
| 1048 | if (file->f_mode & FMODE_READ) { |
| 1049 | hal2_stop_adc(hal2); |
| 1050 | hal2->adc.voices = (val == 1) ? 1 : 2; |
| 1051 | hal2_setup_adc(hal2); |
| 1052 | } |
| 1053 | if (file->f_mode & FMODE_WRITE) { |
| 1054 | hal2_stop_dac(hal2); |
| 1055 | hal2->dac.voices = (val == 1) ? 1 : 2; |
| 1056 | hal2_setup_dac(hal2); |
| 1057 | } |
| 1058 | } |
| 1059 | val = -EINVAL; |
| 1060 | if (file->f_mode & FMODE_READ) |
| 1061 | val = hal2->adc.voices; |
| 1062 | if (file->f_mode & FMODE_WRITE) |
| 1063 | val = hal2->dac.voices; |
| 1064 | return put_user(val, (int *)arg); |
| 1065 | |
| 1066 | case SNDCTL_DSP_GETFMTS: /* Returns a mask */ |
| 1067 | return put_user(H2_SUPPORTED_FORMATS, (int *)arg); |
| 1068 | |
| 1069 | case SNDCTL_DSP_SETFMT: /* Selects ONE fmt*/ |
| 1070 | if (get_user(val, (int *)arg)) |
| 1071 | return -EFAULT; |
| 1072 | if (val != AFMT_QUERY) { |
| 1073 | if (!(val & H2_SUPPORTED_FORMATS)) |
| 1074 | return -EINVAL; |
| 1075 | if (file->f_mode & FMODE_READ) { |
| 1076 | hal2_stop_adc(hal2); |
| 1077 | hal2->adc.format = val; |
| 1078 | hal2_setup_adc(hal2); |
| 1079 | } |
| 1080 | if (file->f_mode & FMODE_WRITE) { |
| 1081 | hal2_stop_dac(hal2); |
| 1082 | hal2->dac.format = val; |
| 1083 | hal2_setup_dac(hal2); |
| 1084 | } |
| 1085 | } else { |
| 1086 | val = -EINVAL; |
| 1087 | if (file->f_mode & FMODE_READ) |
| 1088 | val = hal2->adc.format; |
| 1089 | if (file->f_mode & FMODE_WRITE) |
| 1090 | val = hal2->dac.format; |
| 1091 | } |
| 1092 | return put_user(val, (int *)arg); |
| 1093 | |
| 1094 | case SNDCTL_DSP_POST: |
| 1095 | return 0; |
| 1096 | |
| 1097 | case SNDCTL_DSP_GETOSPACE: { |
| 1098 | audio_buf_info info; |
| 1099 | int i; |
| 1100 | unsigned long flags; |
| 1101 | struct hal2_codec *dac = &hal2->dac; |
| 1102 | |
| 1103 | if (!(file->f_mode & FMODE_WRITE)) |
| 1104 | return -EINVAL; |
| 1105 | info.fragments = 0; |
| 1106 | spin_lock_irqsave(&dac->lock, flags); |
| 1107 | for (i = 0; i < dac->desc_count; i++) |
| 1108 | if (dac->desc[i].cnt == 0) |
| 1109 | info.fragments++; |
| 1110 | spin_unlock_irqrestore(&dac->lock, flags); |
| 1111 | info.fragstotal = dac->desc_count; |
| 1112 | info.fragsize = H2_BLOCK_SIZE; |
| 1113 | info.bytes = info.fragsize * info.fragments; |
| 1114 | |
| 1115 | return copy_to_user((void *)arg, &info, sizeof(info)) ? -EFAULT : 0; |
| 1116 | } |
| 1117 | |
| 1118 | case SNDCTL_DSP_GETISPACE: { |
| 1119 | audio_buf_info info; |
| 1120 | int i; |
| 1121 | unsigned long flags; |
| 1122 | struct hal2_codec *adc = &hal2->adc; |
| 1123 | |
| 1124 | if (!(file->f_mode & FMODE_READ)) |
| 1125 | return -EINVAL; |
| 1126 | info.fragments = 0; |
| 1127 | info.bytes = 0; |
| 1128 | spin_lock_irqsave(&adc->lock, flags); |
| 1129 | for (i = 0; i < adc->desc_count; i++) |
| 1130 | if (adc->desc[i].cnt > 0) { |
| 1131 | info.fragments++; |
| 1132 | info.bytes += adc->desc[i].cnt; |
| 1133 | } |
| 1134 | spin_unlock_irqrestore(&adc->lock, flags); |
| 1135 | info.fragstotal = adc->desc_count; |
| 1136 | info.fragsize = H2_BLOCK_SIZE; |
| 1137 | |
| 1138 | return copy_to_user((void *)arg, &info, sizeof(info)) ? -EFAULT : 0; |
| 1139 | } |
| 1140 | |
| 1141 | case SNDCTL_DSP_NONBLOCK: |
| 1142 | file->f_flags |= O_NONBLOCK; |
| 1143 | return 0; |
| 1144 | |
| 1145 | case SNDCTL_DSP_GETBLKSIZE: |
| 1146 | return put_user(H2_BLOCK_SIZE, (int *)arg); |
| 1147 | |
| 1148 | case SNDCTL_DSP_SETFRAGMENT: |
| 1149 | return 0; |
| 1150 | |
| 1151 | case SOUND_PCM_READ_RATE: |
| 1152 | val = -EINVAL; |
| 1153 | if (file->f_mode & FMODE_READ) |
| 1154 | val = hal2->adc.sample_rate; |
| 1155 | if (file->f_mode & FMODE_WRITE) |
| 1156 | val = hal2->dac.sample_rate; |
| 1157 | return put_user(val, (int *)arg); |
| 1158 | |
| 1159 | case SOUND_PCM_READ_CHANNELS: |
| 1160 | val = -EINVAL; |
| 1161 | if (file->f_mode & FMODE_READ) |
| 1162 | val = hal2->adc.voices; |
| 1163 | if (file->f_mode & FMODE_WRITE) |
| 1164 | val = hal2->dac.voices; |
| 1165 | return put_user(val, (int *)arg); |
| 1166 | |
| 1167 | case SOUND_PCM_READ_BITS: |
| 1168 | return put_user(16, (int *)arg); |
| 1169 | } |
| 1170 | |
| 1171 | return hal2_mixer_ioctl(hal2, cmd, arg); |
| 1172 | } |
| 1173 | |
| 1174 | static ssize_t hal2_read(struct file *file, char *buffer, |
| 1175 | size_t count, loff_t *ppos) |
| 1176 | { |
| 1177 | ssize_t err; |
| 1178 | struct hal2_card *hal2 = (struct hal2_card *) file->private_data; |
| 1179 | struct hal2_codec *adc = &hal2->adc; |
| 1180 | |
| 1181 | if (!count) |
| 1182 | return 0; |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 1183 | if (mutex_lock_interruptible(&adc->sem)) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1184 | return -EINTR; |
| 1185 | if (file->f_flags & O_NONBLOCK) { |
| 1186 | err = hal2_get_buffer(hal2, buffer, count); |
| 1187 | err = err == 0 ? -EAGAIN : err; |
| 1188 | } else { |
| 1189 | do { |
| 1190 | /* ~10% longer */ |
| 1191 | signed long timeout = 1000 * H2_BLOCK_SIZE * |
| 1192 | 2 * adc->voices * HZ / adc->sample_rate / 900; |
| 1193 | unsigned long flags; |
| 1194 | DECLARE_WAITQUEUE(wait, current); |
| 1195 | ssize_t cnt = 0; |
| 1196 | |
| 1197 | err = hal2_get_buffer(hal2, buffer, count); |
| 1198 | if (err > 0) { |
| 1199 | count -= err; |
| 1200 | cnt += err; |
| 1201 | buffer += err; |
| 1202 | err = cnt; |
| 1203 | } |
| 1204 | if (count > 0 && err >= 0) { |
| 1205 | add_wait_queue(&adc->dma_wait, &wait); |
| 1206 | set_current_state(TASK_INTERRUPTIBLE); |
| 1207 | schedule_timeout(timeout); |
| 1208 | spin_lock_irqsave(&adc->lock, flags); |
| 1209 | if (!adc->desc[adc->tail].cnt) |
| 1210 | err = -EAGAIN; |
| 1211 | spin_unlock_irqrestore(&adc->lock, flags); |
| 1212 | if (signal_pending(current)) |
| 1213 | err = -ERESTARTSYS; |
| 1214 | remove_wait_queue(&adc->dma_wait, &wait); |
| 1215 | if (err < 0) { |
| 1216 | hal2_stop_adc(hal2); |
| 1217 | hal2_reset_adc_pointer(hal2); |
| 1218 | } |
| 1219 | } |
| 1220 | } while (count > 0 && err >= 0); |
| 1221 | } |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 1222 | mutex_unlock(&adc->sem); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1223 | |
| 1224 | return err; |
| 1225 | } |
| 1226 | |
| 1227 | static ssize_t hal2_write(struct file *file, const char *buffer, |
| 1228 | size_t count, loff_t *ppos) |
| 1229 | { |
| 1230 | ssize_t err; |
| 1231 | char *buf = (char*) buffer; |
| 1232 | struct hal2_card *hal2 = (struct hal2_card *) file->private_data; |
| 1233 | struct hal2_codec *dac = &hal2->dac; |
| 1234 | |
| 1235 | if (!count) |
| 1236 | return 0; |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 1237 | if (mutex_lock_interruptible(&dac->sem)) |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1238 | return -EINTR; |
| 1239 | if (file->f_flags & O_NONBLOCK) { |
| 1240 | err = hal2_add_buffer(hal2, buf, count); |
| 1241 | err = err == 0 ? -EAGAIN : err; |
| 1242 | } else { |
| 1243 | do { |
| 1244 | /* ~10% longer */ |
| 1245 | signed long timeout = 1000 * H2_BLOCK_SIZE * |
| 1246 | 2 * dac->voices * HZ / dac->sample_rate / 900; |
| 1247 | unsigned long flags; |
| 1248 | DECLARE_WAITQUEUE(wait, current); |
| 1249 | ssize_t cnt = 0; |
| 1250 | |
| 1251 | err = hal2_add_buffer(hal2, buf, count); |
| 1252 | if (err > 0) { |
| 1253 | count -= err; |
| 1254 | cnt += err; |
| 1255 | buf += err; |
| 1256 | err = cnt; |
| 1257 | } |
| 1258 | if (count > 0 && err >= 0) { |
| 1259 | add_wait_queue(&dac->dma_wait, &wait); |
| 1260 | set_current_state(TASK_INTERRUPTIBLE); |
| 1261 | schedule_timeout(timeout); |
| 1262 | spin_lock_irqsave(&dac->lock, flags); |
| 1263 | if (dac->desc[dac->head].cnt) |
| 1264 | err = -EAGAIN; |
| 1265 | spin_unlock_irqrestore(&dac->lock, flags); |
| 1266 | if (signal_pending(current)) |
| 1267 | err = -ERESTARTSYS; |
| 1268 | remove_wait_queue(&dac->dma_wait, &wait); |
| 1269 | if (err < 0) { |
| 1270 | hal2_stop_dac(hal2); |
| 1271 | hal2_reset_dac_pointer(hal2); |
| 1272 | } |
| 1273 | } |
| 1274 | } while (count > 0 && err >= 0); |
| 1275 | } |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 1276 | mutex_unlock(&dac->sem); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1277 | |
| 1278 | return err; |
| 1279 | } |
| 1280 | |
| 1281 | static unsigned int hal2_poll(struct file *file, struct poll_table_struct *wait) |
| 1282 | { |
| 1283 | unsigned long flags; |
| 1284 | unsigned int mask = 0; |
| 1285 | struct hal2_card *hal2 = (struct hal2_card *) file->private_data; |
| 1286 | |
| 1287 | if (file->f_mode & FMODE_READ) { |
| 1288 | struct hal2_codec *adc = &hal2->adc; |
| 1289 | |
| 1290 | poll_wait(file, &adc->dma_wait, wait); |
| 1291 | spin_lock_irqsave(&adc->lock, flags); |
| 1292 | if (adc->desc[adc->tail].cnt > 0) |
| 1293 | mask |= POLLIN; |
| 1294 | spin_unlock_irqrestore(&adc->lock, flags); |
| 1295 | } |
| 1296 | |
| 1297 | if (file->f_mode & FMODE_WRITE) { |
| 1298 | struct hal2_codec *dac = &hal2->dac; |
| 1299 | |
| 1300 | poll_wait(file, &dac->dma_wait, wait); |
| 1301 | spin_lock_irqsave(&dac->lock, flags); |
| 1302 | if (dac->desc[dac->head].cnt == 0) |
| 1303 | mask |= POLLOUT; |
| 1304 | spin_unlock_irqrestore(&dac->lock, flags); |
| 1305 | } |
| 1306 | |
| 1307 | return mask; |
| 1308 | } |
| 1309 | |
| 1310 | static int hal2_open(struct inode *inode, struct file *file) |
| 1311 | { |
| 1312 | int err; |
| 1313 | struct hal2_card *hal2 = hal2_dsp_find_card(iminor(inode)); |
| 1314 | |
| 1315 | if (!hal2) |
| 1316 | return -ENODEV; |
| 1317 | file->private_data = hal2; |
| 1318 | if (file->f_mode & FMODE_READ) { |
| 1319 | struct hal2_codec *adc = &hal2->adc; |
| 1320 | |
| 1321 | if (adc->usecount) |
| 1322 | return -EBUSY; |
| 1323 | /* OSS spec wanted us to use 8 bit, 8 kHz mono by default, |
| 1324 | * but HAL2 can't do 8bit audio */ |
| 1325 | adc->format = AFMT_S16_BE; |
| 1326 | adc->voices = 1; |
| 1327 | adc->sample_rate = hal2_compute_rate(adc, 8000); |
| 1328 | hal2_set_adc_rate(hal2); |
| 1329 | err = hal2_alloc_adc_dmabuf(adc); |
| 1330 | if (err) |
| 1331 | return err; |
| 1332 | hal2_setup_adc(hal2); |
| 1333 | adc->usecount++; |
| 1334 | } |
| 1335 | if (file->f_mode & FMODE_WRITE) { |
| 1336 | struct hal2_codec *dac = &hal2->dac; |
| 1337 | |
| 1338 | if (dac->usecount) |
| 1339 | return -EBUSY; |
| 1340 | dac->format = AFMT_S16_BE; |
| 1341 | dac->voices = 1; |
| 1342 | dac->sample_rate = hal2_compute_rate(dac, 8000); |
| 1343 | hal2_set_dac_rate(hal2); |
| 1344 | err = hal2_alloc_dac_dmabuf(dac); |
| 1345 | if (err) |
| 1346 | return err; |
| 1347 | hal2_setup_dac(hal2); |
| 1348 | dac->usecount++; |
| 1349 | } |
| 1350 | |
| 1351 | return nonseekable_open(inode, file); |
| 1352 | } |
| 1353 | |
| 1354 | static int hal2_release(struct inode *inode, struct file *file) |
| 1355 | { |
| 1356 | struct hal2_card *hal2 = (struct hal2_card *) file->private_data; |
| 1357 | |
| 1358 | if (file->f_mode & FMODE_READ) { |
| 1359 | struct hal2_codec *adc = &hal2->adc; |
| 1360 | |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 1361 | mutex_lock(&adc->sem); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1362 | hal2_stop_adc(hal2); |
| 1363 | hal2_free_adc_dmabuf(adc); |
| 1364 | adc->usecount--; |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 1365 | mutex_unlock(&adc->sem); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1366 | } |
| 1367 | if (file->f_mode & FMODE_WRITE) { |
| 1368 | struct hal2_codec *dac = &hal2->dac; |
| 1369 | |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 1370 | mutex_lock(&dac->sem); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1371 | hal2_sync_dac(hal2); |
| 1372 | hal2_free_dac_dmabuf(dac); |
| 1373 | dac->usecount--; |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 1374 | mutex_unlock(&dac->sem); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1375 | } |
| 1376 | |
| 1377 | return 0; |
| 1378 | } |
| 1379 | |
| 1380 | static struct file_operations hal2_audio_fops = { |
| 1381 | .owner = THIS_MODULE, |
| 1382 | .llseek = no_llseek, |
| 1383 | .read = hal2_read, |
| 1384 | .write = hal2_write, |
| 1385 | .poll = hal2_poll, |
| 1386 | .ioctl = hal2_ioctl, |
| 1387 | .open = hal2_open, |
| 1388 | .release = hal2_release, |
| 1389 | }; |
| 1390 | |
| 1391 | static struct file_operations hal2_mixer_fops = { |
| 1392 | .owner = THIS_MODULE, |
| 1393 | .llseek = no_llseek, |
| 1394 | .ioctl = hal2_ioctl_mixdev, |
| 1395 | .open = hal2_open_mixdev, |
| 1396 | .release = hal2_release_mixdev, |
| 1397 | }; |
| 1398 | |
| 1399 | static void hal2_init_codec(struct hal2_codec *codec, struct hpc3_regs *hpc3, |
| 1400 | int index) |
| 1401 | { |
| 1402 | codec->pbus.pbusnr = index; |
| 1403 | codec->pbus.pbus = &hpc3->pbdma[index]; |
| 1404 | init_waitqueue_head(&codec->dma_wait); |
Ingo Molnar | 910f5d2 | 2006-03-23 03:00:39 -0800 | [diff] [blame] | 1405 | mutex_init(&codec->sem); |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1406 | spin_lock_init(&codec->lock); |
| 1407 | } |
| 1408 | |
| 1409 | static int hal2_detect(struct hal2_card *hal2) |
| 1410 | { |
| 1411 | unsigned short board, major, minor; |
| 1412 | unsigned short rev; |
| 1413 | |
| 1414 | /* reset HAL2 */ |
| 1415 | hal2_isr_write(hal2, 0); |
| 1416 | /* release reset */ |
| 1417 | hal2_isr_write(hal2, H2_ISR_GLOBAL_RESET_N | H2_ISR_CODEC_RESET_N); |
| 1418 | |
| 1419 | hal2_i_write16(hal2, H2I_RELAY_C, H2I_RELAY_C_STATE); |
| 1420 | if ((rev = hal2_rev_look(hal2)) & H2_REV_AUDIO_PRESENT) |
| 1421 | return -ENODEV; |
| 1422 | |
| 1423 | board = (rev & H2_REV_BOARD_M) >> 12; |
| 1424 | major = (rev & H2_REV_MAJOR_CHIP_M) >> 4; |
| 1425 | minor = (rev & H2_REV_MINOR_CHIP_M); |
| 1426 | |
| 1427 | printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n", |
| 1428 | board, major, minor); |
| 1429 | |
| 1430 | return 0; |
| 1431 | } |
| 1432 | |
| 1433 | static int hal2_init_card(struct hal2_card **phal2, struct hpc3_regs *hpc3) |
| 1434 | { |
| 1435 | int ret = 0; |
| 1436 | struct hal2_card *hal2; |
| 1437 | |
| 1438 | hal2 = (struct hal2_card *) kmalloc(sizeof(struct hal2_card), GFP_KERNEL); |
| 1439 | if (!hal2) |
| 1440 | return -ENOMEM; |
| 1441 | memset(hal2, 0, sizeof(struct hal2_card)); |
| 1442 | |
| 1443 | hal2->ctl_regs = (struct hal2_ctl_regs *)hpc3->pbus_extregs[0]; |
| 1444 | hal2->aes_regs = (struct hal2_aes_regs *)hpc3->pbus_extregs[1]; |
| 1445 | hal2->vol_regs = (struct hal2_vol_regs *)hpc3->pbus_extregs[2]; |
| 1446 | hal2->syn_regs = (struct hal2_syn_regs *)hpc3->pbus_extregs[3]; |
| 1447 | |
| 1448 | if (hal2_detect(hal2) < 0) { |
| 1449 | ret = -ENODEV; |
| 1450 | goto free_card; |
| 1451 | } |
| 1452 | |
| 1453 | hal2_init_codec(&hal2->dac, hpc3, 0); |
| 1454 | hal2_init_codec(&hal2->adc, hpc3, 1); |
| 1455 | |
| 1456 | /* |
| 1457 | * All DMA channel interfaces in HAL2 are designed to operate with |
| 1458 | * PBUS programmed for 2 cycles in D3, 2 cycles in D4 and 2 cycles |
| 1459 | * in D5. HAL2 is a 16-bit device which can accept both big and little |
| 1460 | * endian format. It assumes that even address bytes are on high |
| 1461 | * portion of PBUS (15:8) and assumes that HPC3 is programmed to |
| 1462 | * accept a live (unsynchronized) version of P_DREQ_N from HAL2. |
| 1463 | */ |
| 1464 | #define HAL2_PBUS_DMACFG ((0 << HPC3_DMACFG_D3R_SHIFT) | \ |
| 1465 | (2 << HPC3_DMACFG_D4R_SHIFT) | \ |
| 1466 | (2 << HPC3_DMACFG_D5R_SHIFT) | \ |
| 1467 | (0 << HPC3_DMACFG_D3W_SHIFT) | \ |
| 1468 | (2 << HPC3_DMACFG_D4W_SHIFT) | \ |
| 1469 | (2 << HPC3_DMACFG_D5W_SHIFT) | \ |
| 1470 | HPC3_DMACFG_DS16 | \ |
| 1471 | HPC3_DMACFG_EVENHI | \ |
| 1472 | HPC3_DMACFG_RTIME | \ |
| 1473 | (8 << HPC3_DMACFG_BURST_SHIFT) | \ |
| 1474 | HPC3_DMACFG_DRQLIVE) |
| 1475 | /* |
| 1476 | * Ignore what's mentioned in the specification and write value which |
| 1477 | * works in The Real World (TM) |
| 1478 | */ |
| 1479 | hpc3->pbus_dmacfg[hal2->dac.pbus.pbusnr][0] = 0x8208844; |
| 1480 | hpc3->pbus_dmacfg[hal2->adc.pbus.pbusnr][0] = 0x8208844; |
| 1481 | |
Thomas Gleixner | 65ca68b | 2006-07-01 19:29:46 -0700 | [diff] [blame] | 1482 | if (request_irq(SGI_HPCDMA_IRQ, hal2_interrupt, IRQF_SHARED, |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1483 | hal2str, hal2)) { |
| 1484 | printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ); |
| 1485 | ret = -EAGAIN; |
| 1486 | goto free_card; |
| 1487 | } |
| 1488 | |
| 1489 | hal2->dev_dsp = register_sound_dsp(&hal2_audio_fops, -1); |
| 1490 | if (hal2->dev_dsp < 0) { |
| 1491 | ret = hal2->dev_dsp; |
| 1492 | goto free_irq; |
| 1493 | } |
| 1494 | |
| 1495 | hal2->dev_mixer = register_sound_mixer(&hal2_mixer_fops, -1); |
| 1496 | if (hal2->dev_mixer < 0) { |
| 1497 | ret = hal2->dev_mixer; |
| 1498 | goto unregister_dsp; |
| 1499 | } |
| 1500 | |
| 1501 | hal2_init_mixer(hal2); |
| 1502 | |
| 1503 | *phal2 = hal2; |
| 1504 | return 0; |
| 1505 | unregister_dsp: |
| 1506 | unregister_sound_dsp(hal2->dev_dsp); |
| 1507 | free_irq: |
| 1508 | free_irq(SGI_HPCDMA_IRQ, hal2); |
| 1509 | free_card: |
| 1510 | kfree(hal2); |
| 1511 | |
| 1512 | return ret; |
| 1513 | } |
| 1514 | |
| 1515 | extern void (*indy_volume_button)(int); |
| 1516 | |
| 1517 | /* |
| 1518 | * Assuming only one HAL2 card. Mail me if you ever meet machine with |
| 1519 | * more than one. |
| 1520 | */ |
| 1521 | static int __init init_hal2(void) |
| 1522 | { |
| 1523 | int i, error; |
| 1524 | |
| 1525 | for (i = 0; i < MAXCARDS; i++) |
| 1526 | hal2_card[i] = NULL; |
| 1527 | |
| 1528 | error = hal2_init_card(&hal2_card[0], hpc3c0); |
| 1529 | |
| 1530 | /* let Indy's volume buttons work */ |
| 1531 | if (!error && !ip22_is_fullhouse()) |
| 1532 | indy_volume_button = hal2_volume_control; |
| 1533 | |
| 1534 | return error; |
| 1535 | |
| 1536 | } |
| 1537 | |
| 1538 | static void __exit exit_hal2(void) |
| 1539 | { |
| 1540 | int i; |
| 1541 | |
| 1542 | /* unregister volume butons callback function */ |
| 1543 | indy_volume_button = NULL; |
| 1544 | |
| 1545 | for (i = 0; i < MAXCARDS; i++) |
| 1546 | if (hal2_card[i]) { |
| 1547 | free_irq(SGI_HPCDMA_IRQ, hal2_card[i]); |
| 1548 | unregister_sound_dsp(hal2_card[i]->dev_dsp); |
| 1549 | unregister_sound_mixer(hal2_card[i]->dev_mixer); |
| 1550 | kfree(hal2_card[i]); |
| 1551 | } |
| 1552 | } |
| 1553 | |
| 1554 | module_init(init_hal2); |
| 1555 | module_exit(exit_hal2); |
| 1556 | |
| 1557 | MODULE_DESCRIPTION("OSS compatible driver for SGI HAL2 audio"); |
| 1558 | MODULE_AUTHOR("Ladislav Michl"); |
| 1559 | MODULE_LICENSE("GPL"); |