| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1 | /******************************************************************* |
| 2 | * This file is part of the Emulex Linux Device Driver for * |
James.Smart@Emulex.Com | c44ce17 | 2005-06-25 10:34:39 -0400 | [diff] [blame] | 3 | * Fibre Channel Host Bus Adapters. * |
| 4 | * Copyright (C) 2004-2005 Emulex. All rights reserved. * |
| 5 | * EMULEX and SLI are trademarks of Emulex. * |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 6 | * www.emulex.com * |
James.Smart@Emulex.Com | c44ce17 | 2005-06-25 10:34:39 -0400 | [diff] [blame] | 7 | * Portions Copyright (C) 2004-2005 Christoph Hellwig * |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 8 | * * |
| 9 | * This program is free software; you can redistribute it and/or * |
James.Smart@Emulex.Com | c44ce17 | 2005-06-25 10:34:39 -0400 | [diff] [blame] | 10 | * modify it under the terms of version 2 of the GNU General * |
| 11 | * Public License as published by the Free Software Foundation. * |
| 12 | * This program is distributed in the hope that it will be useful. * |
| 13 | * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * |
| 14 | * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * |
| 15 | * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * |
| 16 | * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * |
| 17 | * TO BE LEGALLY INVALID. See the GNU General Public License for * |
| 18 | * more details, a copy of which can be found in the file COPYING * |
| 19 | * included with this package. * |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 20 | *******************************************************************/ |
| 21 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 22 | #include <linux/blkdev.h> |
| 23 | #include <linux/delay.h> |
| 24 | #include <linux/dma-mapping.h> |
| 25 | #include <linux/idr.h> |
| 26 | #include <linux/interrupt.h> |
| 27 | #include <linux/kthread.h> |
| 28 | #include <linux/pci.h> |
| 29 | #include <linux/spinlock.h> |
| 30 | |
James.Smart@Emulex.Com | 9188652 | 2005-08-10 15:03:09 -0400 | [diff] [blame] | 31 | #include <scsi/scsi.h> |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 32 | #include <scsi/scsi_device.h> |
| 33 | #include <scsi/scsi_host.h> |
| 34 | #include <scsi/scsi_transport_fc.h> |
| 35 | |
| 36 | #include "lpfc_hw.h" |
| 37 | #include "lpfc_sli.h" |
| 38 | #include "lpfc_disc.h" |
| 39 | #include "lpfc_scsi.h" |
| 40 | #include "lpfc.h" |
| 41 | #include "lpfc_logmsg.h" |
| 42 | #include "lpfc_crtn.h" |
| 43 | #include "lpfc_version.h" |
| 44 | |
| 45 | static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *); |
| 46 | static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *); |
| 47 | static int lpfc_post_rcv_buf(struct lpfc_hba *); |
| 48 | |
| 49 | static struct scsi_transport_template *lpfc_transport_template = NULL; |
| 50 | static DEFINE_IDR(lpfc_hba_index); |
| 51 | |
| 52 | /************************************************************************/ |
| 53 | /* */ |
| 54 | /* lpfc_config_port_prep */ |
| 55 | /* This routine will do LPFC initialization prior to the */ |
| 56 | /* CONFIG_PORT mailbox command. This will be initialized */ |
| 57 | /* as a SLI layer callback routine. */ |
| 58 | /* This routine returns 0 on success or -ERESTART if it wants */ |
| 59 | /* the SLI layer to reset the HBA and try again. Any */ |
| 60 | /* other return value indicates an error. */ |
| 61 | /* */ |
| 62 | /************************************************************************/ |
| 63 | int |
| 64 | lpfc_config_port_prep(struct lpfc_hba * phba) |
| 65 | { |
| 66 | lpfc_vpd_t *vp = &phba->vpd; |
| 67 | int i = 0, rc; |
| 68 | LPFC_MBOXQ_t *pmb; |
| 69 | MAILBOX_t *mb; |
| 70 | char *lpfc_vpd_data = NULL; |
| 71 | uint16_t offset = 0; |
| 72 | static char licensed[56] = |
| 73 | "key unlock for use with gnu public licensed code only\0"; |
| 74 | |
| 75 | pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); |
| 76 | if (!pmb) { |
| 77 | phba->hba_state = LPFC_HBA_ERROR; |
| 78 | return -ENOMEM; |
| 79 | } |
| 80 | |
| 81 | mb = &pmb->mb; |
| 82 | phba->hba_state = LPFC_INIT_MBX_CMDS; |
| 83 | |
| 84 | if (lpfc_is_LC_HBA(phba->pcidev->device)) { |
| 85 | uint32_t *ptext = (uint32_t *) licensed; |
| 86 | |
| 87 | for (i = 0; i < 56; i += sizeof (uint32_t), ptext++) |
| 88 | *ptext = cpu_to_be32(*ptext); |
| 89 | |
| 90 | lpfc_read_nv(phba, pmb); |
| 91 | memset((char*)mb->un.varRDnvp.rsvd3, 0, |
| 92 | sizeof (mb->un.varRDnvp.rsvd3)); |
| 93 | memcpy((char*)mb->un.varRDnvp.rsvd3, licensed, |
| 94 | sizeof (licensed)); |
| 95 | |
| 96 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
| 97 | |
| 98 | if (rc != MBX_SUCCESS) { |
| 99 | lpfc_printf_log(phba, |
| 100 | KERN_ERR, |
| 101 | LOG_MBOX, |
| 102 | "%d:0324 Config Port initialization " |
| 103 | "error, mbxCmd x%x READ_NVPARM, " |
| 104 | "mbxStatus x%x\n", |
| 105 | phba->brd_no, |
| 106 | mb->mbxCommand, mb->mbxStatus); |
| 107 | mempool_free(pmb, phba->mbox_mem_pool); |
| 108 | return -ERESTART; |
| 109 | } |
| 110 | memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename, |
| 111 | sizeof (mb->un.varRDnvp.nodename)); |
| 112 | } |
| 113 | |
| 114 | /* Setup and issue mailbox READ REV command */ |
| 115 | lpfc_read_rev(phba, pmb); |
| 116 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
| 117 | if (rc != MBX_SUCCESS) { |
| 118 | lpfc_printf_log(phba, |
| 119 | KERN_ERR, |
| 120 | LOG_INIT, |
| 121 | "%d:0439 Adapter failed to init, mbxCmd x%x " |
| 122 | "READ_REV, mbxStatus x%x\n", |
| 123 | phba->brd_no, |
| 124 | mb->mbxCommand, mb->mbxStatus); |
| 125 | mempool_free( pmb, phba->mbox_mem_pool); |
| 126 | return -ERESTART; |
| 127 | } |
| 128 | |
James.Smart@Emulex.Com | 1de933f | 2005-11-28 11:41:15 -0500 | [diff] [blame] | 129 | /* |
| 130 | * The value of rr must be 1 since the driver set the cv field to 1. |
| 131 | * This setting requires the FW to set all revision fields. |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 132 | */ |
James.Smart@Emulex.Com | 1de933f | 2005-11-28 11:41:15 -0500 | [diff] [blame] | 133 | if (mb->un.varRdRev.rr == 0) { |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 134 | vp->rev.rBit = 0; |
James.Smart@Emulex.Com | 1de933f | 2005-11-28 11:41:15 -0500 | [diff] [blame] | 135 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
| 136 | "%d:0440 Adapter failed to init, READ_REV has " |
| 137 | "missing revision information.\n", |
| 138 | phba->brd_no); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 139 | mempool_free(pmb, phba->mbox_mem_pool); |
| 140 | return -ERESTART; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 141 | } |
| 142 | |
| 143 | /* Save information as VPD data */ |
James.Smart@Emulex.Com | 1de933f | 2005-11-28 11:41:15 -0500 | [diff] [blame] | 144 | vp->rev.rBit = 1; |
| 145 | vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev; |
| 146 | memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16); |
| 147 | vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev; |
| 148 | memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 149 | vp->rev.biuRev = mb->un.varRdRev.biuRev; |
| 150 | vp->rev.smRev = mb->un.varRdRev.smRev; |
| 151 | vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev; |
| 152 | vp->rev.endecRev = mb->un.varRdRev.endecRev; |
| 153 | vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh; |
| 154 | vp->rev.fcphLow = mb->un.varRdRev.fcphLow; |
| 155 | vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh; |
| 156 | vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow; |
| 157 | vp->rev.postKernRev = mb->un.varRdRev.postKernRev; |
| 158 | vp->rev.opFwRev = mb->un.varRdRev.opFwRev; |
| 159 | |
| 160 | if (lpfc_is_LC_HBA(phba->pcidev->device)) |
| 161 | memcpy(phba->RandomData, (char *)&mb->un.varWords[24], |
| 162 | sizeof (phba->RandomData)); |
| 163 | |
| 164 | /* Get the default values for Model Name and Description */ |
| 165 | lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc); |
| 166 | |
| 167 | /* Get adapter VPD information */ |
| 168 | pmb->context2 = kmalloc(DMP_RSP_SIZE, GFP_KERNEL); |
| 169 | if (!pmb->context2) |
| 170 | goto out_free_mbox; |
| 171 | lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL); |
| 172 | if (!lpfc_vpd_data) |
| 173 | goto out_free_context2; |
| 174 | |
| 175 | do { |
| 176 | lpfc_dump_mem(phba, pmb, offset); |
| 177 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
| 178 | |
| 179 | if (rc != MBX_SUCCESS) { |
| 180 | lpfc_printf_log(phba, KERN_INFO, LOG_INIT, |
| 181 | "%d:0441 VPD not present on adapter, " |
| 182 | "mbxCmd x%x DUMP VPD, mbxStatus x%x\n", |
| 183 | phba->brd_no, |
| 184 | mb->mbxCommand, mb->mbxStatus); |
| 185 | kfree(lpfc_vpd_data); |
| 186 | lpfc_vpd_data = NULL; |
| 187 | break; |
| 188 | } |
| 189 | |
| 190 | lpfc_sli_pcimem_bcopy(pmb->context2, lpfc_vpd_data + offset, |
| 191 | mb->un.varDmp.word_cnt); |
| 192 | offset += mb->un.varDmp.word_cnt; |
| 193 | } while (mb->un.varDmp.word_cnt); |
| 194 | lpfc_parse_vpd(phba, lpfc_vpd_data); |
| 195 | |
| 196 | kfree(lpfc_vpd_data); |
| 197 | out_free_context2: |
| 198 | kfree(pmb->context2); |
| 199 | out_free_mbox: |
| 200 | mempool_free(pmb, phba->mbox_mem_pool); |
| 201 | return 0; |
| 202 | } |
| 203 | |
| 204 | /************************************************************************/ |
| 205 | /* */ |
| 206 | /* lpfc_config_port_post */ |
| 207 | /* This routine will do LPFC initialization after the */ |
| 208 | /* CONFIG_PORT mailbox command. This will be initialized */ |
| 209 | /* as a SLI layer callback routine. */ |
| 210 | /* This routine returns 0 on success. Any other return value */ |
| 211 | /* indicates an error. */ |
| 212 | /* */ |
| 213 | /************************************************************************/ |
| 214 | int |
| 215 | lpfc_config_port_post(struct lpfc_hba * phba) |
| 216 | { |
| 217 | LPFC_MBOXQ_t *pmb; |
| 218 | MAILBOX_t *mb; |
| 219 | struct lpfc_dmabuf *mp; |
| 220 | struct lpfc_sli *psli = &phba->sli; |
| 221 | uint32_t status, timeout; |
| 222 | int i, j, rc; |
| 223 | |
| 224 | pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); |
| 225 | if (!pmb) { |
| 226 | phba->hba_state = LPFC_HBA_ERROR; |
| 227 | return -ENOMEM; |
| 228 | } |
| 229 | mb = &pmb->mb; |
| 230 | |
| 231 | lpfc_config_link(phba, pmb); |
| 232 | rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); |
| 233 | if (rc != MBX_SUCCESS) { |
| 234 | lpfc_printf_log(phba, |
| 235 | KERN_ERR, |
| 236 | LOG_INIT, |
| 237 | "%d:0447 Adapter failed init, mbxCmd x%x " |
| 238 | "CONFIG_LINK mbxStatus x%x\n", |
| 239 | phba->brd_no, |
| 240 | mb->mbxCommand, mb->mbxStatus); |
| 241 | phba->hba_state = LPFC_HBA_ERROR; |
| 242 | mempool_free( pmb, phba->mbox_mem_pool); |
| 243 | return -EIO; |
| 244 | } |
| 245 | |
| 246 | /* Get login parameters for NID. */ |
| 247 | lpfc_read_sparam(phba, pmb); |
| 248 | if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) { |
| 249 | lpfc_printf_log(phba, |
| 250 | KERN_ERR, |
| 251 | LOG_INIT, |
| 252 | "%d:0448 Adapter failed init, mbxCmd x%x " |
| 253 | "READ_SPARM mbxStatus x%x\n", |
| 254 | phba->brd_no, |
| 255 | mb->mbxCommand, mb->mbxStatus); |
| 256 | phba->hba_state = LPFC_HBA_ERROR; |
| 257 | mp = (struct lpfc_dmabuf *) pmb->context1; |
| 258 | mempool_free( pmb, phba->mbox_mem_pool); |
| 259 | lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| 260 | kfree(mp); |
| 261 | return -EIO; |
| 262 | } |
| 263 | |
| 264 | mp = (struct lpfc_dmabuf *) pmb->context1; |
| 265 | |
| 266 | memcpy(&phba->fc_sparam, mp->virt, sizeof (struct serv_parm)); |
| 267 | lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| 268 | kfree(mp); |
| 269 | pmb->context1 = NULL; |
| 270 | |
| 271 | memcpy(&phba->fc_nodename, &phba->fc_sparam.nodeName, |
| 272 | sizeof (struct lpfc_name)); |
| 273 | memcpy(&phba->fc_portname, &phba->fc_sparam.portName, |
| 274 | sizeof (struct lpfc_name)); |
| 275 | /* If no serial number in VPD data, use low 6 bytes of WWNN */ |
| 276 | /* This should be consolidated into parse_vpd ? - mr */ |
| 277 | if (phba->SerialNumber[0] == 0) { |
| 278 | uint8_t *outptr; |
| 279 | |
Andrew Morton | 68ce1eb | 2005-09-21 09:46:54 -0700 | [diff] [blame] | 280 | outptr = &phba->fc_nodename.u.s.IEEE[0]; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 281 | for (i = 0; i < 12; i++) { |
| 282 | status = *outptr++; |
| 283 | j = ((status & 0xf0) >> 4); |
| 284 | if (j <= 9) |
| 285 | phba->SerialNumber[i] = |
| 286 | (char)((uint8_t) 0x30 + (uint8_t) j); |
| 287 | else |
| 288 | phba->SerialNumber[i] = |
| 289 | (char)((uint8_t) 0x61 + (uint8_t) (j - 10)); |
| 290 | i++; |
| 291 | j = (status & 0xf); |
| 292 | if (j <= 9) |
| 293 | phba->SerialNumber[i] = |
| 294 | (char)((uint8_t) 0x30 + (uint8_t) j); |
| 295 | else |
| 296 | phba->SerialNumber[i] = |
| 297 | (char)((uint8_t) 0x61 + (uint8_t) (j - 10)); |
| 298 | } |
| 299 | } |
| 300 | |
| 301 | /* This should turn on DELAYED ABTS for ELS timeouts */ |
| 302 | lpfc_set_slim(phba, pmb, 0x052198, 0x1); |
| 303 | if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) { |
| 304 | phba->hba_state = LPFC_HBA_ERROR; |
| 305 | mempool_free( pmb, phba->mbox_mem_pool); |
| 306 | return -EIO; |
| 307 | } |
| 308 | |
| 309 | |
| 310 | lpfc_read_config(phba, pmb); |
| 311 | if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) { |
| 312 | lpfc_printf_log(phba, |
| 313 | KERN_ERR, |
| 314 | LOG_INIT, |
| 315 | "%d:0453 Adapter failed to init, mbxCmd x%x " |
| 316 | "READ_CONFIG, mbxStatus x%x\n", |
| 317 | phba->brd_no, |
| 318 | mb->mbxCommand, mb->mbxStatus); |
| 319 | phba->hba_state = LPFC_HBA_ERROR; |
| 320 | mempool_free( pmb, phba->mbox_mem_pool); |
| 321 | return -EIO; |
| 322 | } |
| 323 | |
| 324 | /* Reset the DFT_HBA_Q_DEPTH to the max xri */ |
| 325 | if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1)) |
| 326 | phba->cfg_hba_queue_depth = |
| 327 | mb->un.varRdConfig.max_xri + 1; |
| 328 | |
| 329 | phba->lmt = mb->un.varRdConfig.lmt; |
| 330 | /* HBA is not 4GB capable, or HBA is not 2GB capable, |
| 331 | don't let link speed ask for it */ |
| 332 | if ((((phba->lmt & LMT_4250_10bit) != LMT_4250_10bit) && |
| 333 | (phba->cfg_link_speed > LINK_SPEED_2G)) || |
| 334 | (((phba->lmt & LMT_2125_10bit) != LMT_2125_10bit) && |
| 335 | (phba->cfg_link_speed > LINK_SPEED_1G))) { |
| 336 | /* Reset link speed to auto. 1G/2GB HBA cfg'd for 4G */ |
| 337 | lpfc_printf_log(phba, |
| 338 | KERN_WARNING, |
| 339 | LOG_LINK_EVENT, |
| 340 | "%d:1302 Invalid speed for this board: " |
| 341 | "Reset link speed to auto: x%x\n", |
| 342 | phba->brd_no, |
| 343 | phba->cfg_link_speed); |
| 344 | phba->cfg_link_speed = LINK_SPEED_AUTO; |
| 345 | } |
| 346 | |
| 347 | phba->hba_state = LPFC_LINK_DOWN; |
| 348 | |
| 349 | /* Only process IOCBs on ring 0 till hba_state is READY */ |
| 350 | if (psli->ring[psli->ip_ring].cmdringaddr) |
| 351 | psli->ring[psli->ip_ring].flag |= LPFC_STOP_IOCB_EVENT; |
| 352 | if (psli->ring[psli->fcp_ring].cmdringaddr) |
| 353 | psli->ring[psli->fcp_ring].flag |= LPFC_STOP_IOCB_EVENT; |
| 354 | if (psli->ring[psli->next_ring].cmdringaddr) |
| 355 | psli->ring[psli->next_ring].flag |= LPFC_STOP_IOCB_EVENT; |
| 356 | |
| 357 | /* Post receive buffers for desired rings */ |
| 358 | lpfc_post_rcv_buf(phba); |
| 359 | |
| 360 | /* Enable appropriate host interrupts */ |
| 361 | spin_lock_irq(phba->host->host_lock); |
| 362 | status = readl(phba->HCregaddr); |
| 363 | status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA; |
| 364 | if (psli->num_rings > 0) |
| 365 | status |= HC_R0INT_ENA; |
| 366 | if (psli->num_rings > 1) |
| 367 | status |= HC_R1INT_ENA; |
| 368 | if (psli->num_rings > 2) |
| 369 | status |= HC_R2INT_ENA; |
| 370 | if (psli->num_rings > 3) |
| 371 | status |= HC_R3INT_ENA; |
| 372 | |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame^] | 373 | if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) && |
| 374 | (phba->cfg_poll & DISABLE_FCP_RING_INT)) |
| 375 | status &= ~(HC_R0INT_ENA << LPFC_FCP_RING); |
| 376 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 377 | writel(status, phba->HCregaddr); |
| 378 | readl(phba->HCregaddr); /* flush */ |
| 379 | spin_unlock_irq(phba->host->host_lock); |
| 380 | |
| 381 | /* |
| 382 | * Setup the ring 0 (els) timeout handler |
| 383 | */ |
| 384 | timeout = phba->fc_ratov << 1; |
| 385 | phba->els_tmofunc.expires = jiffies + HZ * timeout; |
| 386 | add_timer(&phba->els_tmofunc); |
| 387 | |
| 388 | lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed); |
| 389 | pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; |
| 390 | if (lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT) != MBX_SUCCESS) { |
| 391 | lpfc_printf_log(phba, |
| 392 | KERN_ERR, |
| 393 | LOG_INIT, |
| 394 | "%d:0454 Adapter failed to init, mbxCmd x%x " |
| 395 | "INIT_LINK, mbxStatus x%x\n", |
| 396 | phba->brd_no, |
| 397 | mb->mbxCommand, mb->mbxStatus); |
| 398 | |
| 399 | /* Clear all interrupt enable conditions */ |
| 400 | writel(0, phba->HCregaddr); |
| 401 | readl(phba->HCregaddr); /* flush */ |
| 402 | /* Clear all pending interrupts */ |
| 403 | writel(0xffffffff, phba->HAregaddr); |
| 404 | readl(phba->HAregaddr); /* flush */ |
| 405 | |
| 406 | phba->hba_state = LPFC_HBA_ERROR; |
| 407 | mempool_free(pmb, phba->mbox_mem_pool); |
| 408 | return -EIO; |
| 409 | } |
| 410 | /* MBOX buffer will be freed in mbox compl */ |
| 411 | |
| 412 | i = 0; |
| 413 | while ((phba->hba_state != LPFC_HBA_READY) || |
| 414 | (phba->num_disc_nodes) || (phba->fc_prli_sent) || |
| 415 | ((phba->fc_map_cnt == 0) && (i<2)) || |
| 416 | (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) { |
| 417 | /* Check every second for 30 retries. */ |
| 418 | i++; |
| 419 | if (i > 30) { |
| 420 | break; |
| 421 | } |
| 422 | if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) { |
| 423 | /* The link is down. Set linkdown timeout */ |
| 424 | break; |
| 425 | } |
| 426 | |
| 427 | /* Delay for 1 second to give discovery time to complete. */ |
| 428 | msleep(1000); |
| 429 | |
| 430 | } |
| 431 | |
| 432 | /* Since num_disc_nodes keys off of PLOGI, delay a bit to let |
| 433 | * any potential PRLIs to flush thru the SLI sub-system. |
| 434 | */ |
| 435 | msleep(50); |
| 436 | |
| 437 | return (0); |
| 438 | } |
| 439 | |
| 440 | /************************************************************************/ |
| 441 | /* */ |
| 442 | /* lpfc_hba_down_prep */ |
| 443 | /* This routine will do LPFC uninitialization before the */ |
| 444 | /* HBA is reset when bringing down the SLI Layer. This will be */ |
| 445 | /* initialized as a SLI layer callback routine. */ |
| 446 | /* This routine returns 0 on success. Any other return value */ |
| 447 | /* indicates an error. */ |
| 448 | /* */ |
| 449 | /************************************************************************/ |
| 450 | int |
| 451 | lpfc_hba_down_prep(struct lpfc_hba * phba) |
| 452 | { |
| 453 | /* Disable interrupts */ |
| 454 | writel(0, phba->HCregaddr); |
| 455 | readl(phba->HCregaddr); /* flush */ |
| 456 | |
| 457 | /* Cleanup potential discovery resources */ |
| 458 | lpfc_els_flush_rscn(phba); |
| 459 | lpfc_els_flush_cmd(phba); |
| 460 | lpfc_disc_flush_list(phba); |
| 461 | |
| 462 | return (0); |
| 463 | } |
| 464 | |
| 465 | /************************************************************************/ |
| 466 | /* */ |
| 467 | /* lpfc_handle_eratt */ |
| 468 | /* This routine will handle processing a Host Attention */ |
| 469 | /* Error Status event. This will be initialized */ |
| 470 | /* as a SLI layer callback routine. */ |
| 471 | /* */ |
| 472 | /************************************************************************/ |
| 473 | void |
| 474 | lpfc_handle_eratt(struct lpfc_hba * phba) |
| 475 | { |
| 476 | struct lpfc_sli *psli = &phba->sli; |
| 477 | struct lpfc_sli_ring *pring; |
| 478 | |
| 479 | /* |
| 480 | * If a reset is sent to the HBA restore PCI configuration registers. |
| 481 | */ |
| 482 | if ( phba->hba_state == LPFC_INIT_START ) { |
| 483 | mdelay(1); |
| 484 | readl(phba->HCregaddr); /* flush */ |
| 485 | writel(0, phba->HCregaddr); |
| 486 | readl(phba->HCregaddr); /* flush */ |
| 487 | |
| 488 | /* Restore PCI cmd register */ |
| 489 | pci_write_config_word(phba->pcidev, |
| 490 | PCI_COMMAND, phba->pci_cfg_value); |
| 491 | } |
| 492 | |
| 493 | if (phba->work_hs & HS_FFER6) { |
| 494 | /* Re-establishing Link */ |
| 495 | lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT, |
| 496 | "%d:1301 Re-establishing Link " |
| 497 | "Data: x%x x%x x%x\n", |
| 498 | phba->brd_no, phba->work_hs, |
| 499 | phba->work_status[0], phba->work_status[1]); |
| 500 | spin_lock_irq(phba->host->host_lock); |
| 501 | phba->fc_flag |= FC_ESTABLISH_LINK; |
| 502 | spin_unlock_irq(phba->host->host_lock); |
| 503 | |
| 504 | /* |
| 505 | * Firmware stops when it triggled erratt with HS_FFER6. |
| 506 | * That could cause the I/Os dropped by the firmware. |
| 507 | * Error iocb (I/O) on txcmplq and let the SCSI layer |
| 508 | * retry it after re-establishing link. |
| 509 | */ |
| 510 | pring = &psli->ring[psli->fcp_ring]; |
| 511 | lpfc_sli_abort_iocb_ring(phba, pring); |
| 512 | |
| 513 | |
| 514 | /* |
| 515 | * There was a firmware error. Take the hba offline and then |
| 516 | * attempt to restart it. |
| 517 | */ |
| 518 | lpfc_offline(phba); |
| 519 | if (lpfc_online(phba) == 0) { /* Initialize the HBA */ |
| 520 | mod_timer(&phba->fc_estabtmo, jiffies + HZ * 60); |
| 521 | return; |
| 522 | } |
| 523 | } else { |
| 524 | /* The if clause above forces this code path when the status |
| 525 | * failure is a value other than FFER6. Do not call the offline |
| 526 | * twice. This is the adapter hardware error path. |
| 527 | */ |
| 528 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
| 529 | "%d:0457 Adapter Hardware Error " |
| 530 | "Data: x%x x%x x%x\n", |
| 531 | phba->brd_no, phba->work_hs, |
| 532 | phba->work_status[0], phba->work_status[1]); |
| 533 | |
| 534 | lpfc_offline(phba); |
| 535 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 536 | } |
| 537 | } |
| 538 | |
| 539 | /************************************************************************/ |
| 540 | /* */ |
| 541 | /* lpfc_handle_latt */ |
| 542 | /* This routine will handle processing a Host Attention */ |
| 543 | /* Link Status event. This will be initialized */ |
| 544 | /* as a SLI layer callback routine. */ |
| 545 | /* */ |
| 546 | /************************************************************************/ |
| 547 | void |
| 548 | lpfc_handle_latt(struct lpfc_hba * phba) |
| 549 | { |
| 550 | struct lpfc_sli *psli = &phba->sli; |
| 551 | LPFC_MBOXQ_t *pmb; |
| 552 | volatile uint32_t control; |
| 553 | struct lpfc_dmabuf *mp; |
| 554 | int rc = -ENOMEM; |
| 555 | |
| 556 | pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); |
| 557 | if (!pmb) |
| 558 | goto lpfc_handle_latt_err_exit; |
| 559 | |
| 560 | mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); |
| 561 | if (!mp) |
| 562 | goto lpfc_handle_latt_free_pmb; |
| 563 | |
| 564 | mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys); |
| 565 | if (!mp->virt) |
| 566 | goto lpfc_handle_latt_free_mp; |
| 567 | |
| 568 | rc = -EIO; |
| 569 | |
James.Smart@Emulex.Com | 6281bfe | 2005-11-28 11:41:33 -0500 | [diff] [blame] | 570 | /* Cleanup any outstanding ELS commands */ |
| 571 | lpfc_els_flush_cmd(phba); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 572 | |
| 573 | psli->slistat.link_event++; |
| 574 | lpfc_read_la(phba, pmb, mp); |
| 575 | pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la; |
| 576 | rc = lpfc_sli_issue_mbox (phba, pmb, (MBX_NOWAIT | MBX_STOP_IOCB)); |
| 577 | if (rc == MBX_NOT_FINISHED) |
| 578 | goto lpfc_handle_latt_free_mp; |
| 579 | |
| 580 | /* Clear Link Attention in HA REG */ |
| 581 | spin_lock_irq(phba->host->host_lock); |
| 582 | writel(HA_LATT, phba->HAregaddr); |
| 583 | readl(phba->HAregaddr); /* flush */ |
| 584 | spin_unlock_irq(phba->host->host_lock); |
| 585 | |
| 586 | return; |
| 587 | |
| 588 | lpfc_handle_latt_free_mp: |
| 589 | kfree(mp); |
| 590 | lpfc_handle_latt_free_pmb: |
| 591 | kfree(pmb); |
| 592 | lpfc_handle_latt_err_exit: |
| 593 | /* Enable Link attention interrupts */ |
| 594 | spin_lock_irq(phba->host->host_lock); |
| 595 | psli->sli_flag |= LPFC_PROCESS_LA; |
| 596 | control = readl(phba->HCregaddr); |
| 597 | control |= HC_LAINT_ENA; |
| 598 | writel(control, phba->HCregaddr); |
| 599 | readl(phba->HCregaddr); /* flush */ |
| 600 | |
| 601 | /* Clear Link Attention in HA REG */ |
| 602 | writel(HA_LATT, phba->HAregaddr); |
| 603 | readl(phba->HAregaddr); /* flush */ |
| 604 | spin_unlock_irq(phba->host->host_lock); |
| 605 | lpfc_linkdown(phba); |
| 606 | phba->hba_state = LPFC_HBA_ERROR; |
| 607 | |
| 608 | /* The other case is an error from issue_mbox */ |
| 609 | if (rc == -ENOMEM) |
| 610 | lpfc_printf_log(phba, |
| 611 | KERN_WARNING, |
| 612 | LOG_MBOX, |
| 613 | "%d:0300 READ_LA: no buffers\n", |
| 614 | phba->brd_no); |
| 615 | |
| 616 | return; |
| 617 | } |
| 618 | |
| 619 | /************************************************************************/ |
| 620 | /* */ |
| 621 | /* lpfc_parse_vpd */ |
| 622 | /* This routine will parse the VPD data */ |
| 623 | /* */ |
| 624 | /************************************************************************/ |
| 625 | static int |
| 626 | lpfc_parse_vpd(struct lpfc_hba * phba, uint8_t * vpd) |
| 627 | { |
| 628 | uint8_t lenlo, lenhi; |
| 629 | uint32_t Length; |
| 630 | int i, j; |
| 631 | int finished = 0; |
| 632 | int index = 0; |
| 633 | |
| 634 | if (!vpd) |
| 635 | return 0; |
| 636 | |
| 637 | /* Vital Product */ |
| 638 | lpfc_printf_log(phba, |
| 639 | KERN_INFO, |
| 640 | LOG_INIT, |
| 641 | "%d:0455 Vital Product Data: x%x x%x x%x x%x\n", |
| 642 | phba->brd_no, |
| 643 | (uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2], |
| 644 | (uint32_t) vpd[3]); |
| 645 | do { |
| 646 | switch (vpd[index]) { |
| 647 | case 0x82: |
| 648 | index += 1; |
| 649 | lenlo = vpd[index]; |
| 650 | index += 1; |
| 651 | lenhi = vpd[index]; |
| 652 | index += 1; |
| 653 | i = ((((unsigned short)lenhi) << 8) + lenlo); |
| 654 | index += i; |
| 655 | break; |
| 656 | case 0x90: |
| 657 | index += 1; |
| 658 | lenlo = vpd[index]; |
| 659 | index += 1; |
| 660 | lenhi = vpd[index]; |
| 661 | index += 1; |
| 662 | Length = ((((unsigned short)lenhi) << 8) + lenlo); |
| 663 | |
| 664 | while (Length > 0) { |
| 665 | /* Look for Serial Number */ |
| 666 | if ((vpd[index] == 'S') && (vpd[index+1] == 'N')) { |
| 667 | index += 2; |
| 668 | i = vpd[index]; |
| 669 | index += 1; |
| 670 | j = 0; |
| 671 | Length -= (3+i); |
| 672 | while(i--) { |
| 673 | phba->SerialNumber[j++] = vpd[index++]; |
| 674 | if (j == 31) |
| 675 | break; |
| 676 | } |
| 677 | phba->SerialNumber[j] = 0; |
| 678 | continue; |
| 679 | } |
| 680 | else if ((vpd[index] == 'V') && (vpd[index+1] == '1')) { |
| 681 | phba->vpd_flag |= VPD_MODEL_DESC; |
| 682 | index += 2; |
| 683 | i = vpd[index]; |
| 684 | index += 1; |
| 685 | j = 0; |
| 686 | Length -= (3+i); |
| 687 | while(i--) { |
| 688 | phba->ModelDesc[j++] = vpd[index++]; |
| 689 | if (j == 255) |
| 690 | break; |
| 691 | } |
| 692 | phba->ModelDesc[j] = 0; |
| 693 | continue; |
| 694 | } |
| 695 | else if ((vpd[index] == 'V') && (vpd[index+1] == '2')) { |
| 696 | phba->vpd_flag |= VPD_MODEL_NAME; |
| 697 | index += 2; |
| 698 | i = vpd[index]; |
| 699 | index += 1; |
| 700 | j = 0; |
| 701 | Length -= (3+i); |
| 702 | while(i--) { |
| 703 | phba->ModelName[j++] = vpd[index++]; |
| 704 | if (j == 79) |
| 705 | break; |
| 706 | } |
| 707 | phba->ModelName[j] = 0; |
| 708 | continue; |
| 709 | } |
| 710 | else if ((vpd[index] == 'V') && (vpd[index+1] == '3')) { |
| 711 | phba->vpd_flag |= VPD_PROGRAM_TYPE; |
| 712 | index += 2; |
| 713 | i = vpd[index]; |
| 714 | index += 1; |
| 715 | j = 0; |
| 716 | Length -= (3+i); |
| 717 | while(i--) { |
| 718 | phba->ProgramType[j++] = vpd[index++]; |
| 719 | if (j == 255) |
| 720 | break; |
| 721 | } |
| 722 | phba->ProgramType[j] = 0; |
| 723 | continue; |
| 724 | } |
| 725 | else if ((vpd[index] == 'V') && (vpd[index+1] == '4')) { |
| 726 | phba->vpd_flag |= VPD_PORT; |
| 727 | index += 2; |
| 728 | i = vpd[index]; |
| 729 | index += 1; |
| 730 | j = 0; |
| 731 | Length -= (3+i); |
| 732 | while(i--) { |
| 733 | phba->Port[j++] = vpd[index++]; |
| 734 | if (j == 19) |
| 735 | break; |
| 736 | } |
| 737 | phba->Port[j] = 0; |
| 738 | continue; |
| 739 | } |
| 740 | else { |
| 741 | index += 2; |
| 742 | i = vpd[index]; |
| 743 | index += 1; |
| 744 | index += i; |
| 745 | Length -= (3 + i); |
| 746 | } |
| 747 | } |
| 748 | finished = 0; |
| 749 | break; |
| 750 | case 0x78: |
| 751 | finished = 1; |
| 752 | break; |
| 753 | default: |
| 754 | index ++; |
| 755 | break; |
| 756 | } |
| 757 | } while (!finished && (index < 108)); |
| 758 | |
| 759 | return(1); |
| 760 | } |
| 761 | |
| 762 | static void |
| 763 | lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp) |
| 764 | { |
| 765 | lpfc_vpd_t *vp; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 766 | uint16_t dev_id; |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 767 | uint16_t dev_subid; |
James.Smart@Emulex.Com | 964b77e | 2005-10-28 20:29:01 -0400 | [diff] [blame] | 768 | uint8_t hdrtype; |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 769 | char *model_str = ""; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 770 | |
| 771 | vp = &phba->vpd; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 772 | pci_read_config_word(phba->pcidev, PCI_DEVICE_ID, &dev_id); |
James.Smart@Emulex.Com | 964b77e | 2005-10-28 20:29:01 -0400 | [diff] [blame] | 773 | pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 774 | |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 775 | switch (dev_id) { |
James.Smart@Emulex.Com | 06325e7 | 2005-06-25 10:34:22 -0400 | [diff] [blame] | 776 | case PCI_DEVICE_ID_FIREFLY: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 777 | model_str = "LP6000 1Gb PCI"; |
James.Smart@Emulex.Com | 06325e7 | 2005-06-25 10:34:22 -0400 | [diff] [blame] | 778 | break; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 779 | case PCI_DEVICE_ID_SUPERFLY: |
| 780 | if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3) |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 781 | model_str = "LP7000 1Gb PCI"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 782 | else |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 783 | model_str = "LP7000E 1Gb PCI"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 784 | break; |
| 785 | case PCI_DEVICE_ID_DRAGONFLY: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 786 | model_str = "LP8000 1Gb PCI"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 787 | break; |
| 788 | case PCI_DEVICE_ID_CENTAUR: |
| 789 | if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID) |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 790 | model_str = "LP9002 2Gb PCI"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 791 | else |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 792 | model_str = "LP9000 1Gb PCI"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 793 | break; |
| 794 | case PCI_DEVICE_ID_RFLY: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 795 | model_str = "LP952 2Gb PCI"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 796 | break; |
| 797 | case PCI_DEVICE_ID_PEGASUS: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 798 | model_str = "LP9802 2Gb PCI-X"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 799 | break; |
| 800 | case PCI_DEVICE_ID_THOR: |
James.Smart@Emulex.Com | 964b77e | 2005-10-28 20:29:01 -0400 | [diff] [blame] | 801 | if (hdrtype == 0x80) |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 802 | model_str = "LP10000DC 2Gb 2-port PCI-X"; |
James.Smart@Emulex.Com | 964b77e | 2005-10-28 20:29:01 -0400 | [diff] [blame] | 803 | else |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 804 | model_str = "LP10000 2Gb PCI-X"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 805 | break; |
| 806 | case PCI_DEVICE_ID_VIPER: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 807 | model_str = "LPX1000 10Gb PCI-X"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 808 | break; |
| 809 | case PCI_DEVICE_ID_PFLY: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 810 | model_str = "LP982 2Gb PCI-X"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 811 | break; |
| 812 | case PCI_DEVICE_ID_TFLY: |
James.Smart@Emulex.Com | 964b77e | 2005-10-28 20:29:01 -0400 | [diff] [blame] | 813 | if (hdrtype == 0x80) |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 814 | model_str = "LP1050DC 2Gb 2-port PCI-X"; |
James.Smart@Emulex.Com | 964b77e | 2005-10-28 20:29:01 -0400 | [diff] [blame] | 815 | else |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 816 | model_str = "LP1050 2Gb PCI-X"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 817 | break; |
| 818 | case PCI_DEVICE_ID_HELIOS: |
James.Smart@Emulex.Com | 964b77e | 2005-10-28 20:29:01 -0400 | [diff] [blame] | 819 | if (hdrtype == 0x80) |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 820 | model_str = "LP11002 4Gb 2-port PCI-X2"; |
James.Smart@Emulex.Com | 964b77e | 2005-10-28 20:29:01 -0400 | [diff] [blame] | 821 | else |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 822 | model_str = "LP11000 4Gb PCI-X2"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 823 | break; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 824 | case PCI_DEVICE_ID_HELIOS_SCSP: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 825 | model_str = "LP11000-SP 4Gb PCI-X2"; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 826 | break; |
| 827 | case PCI_DEVICE_ID_HELIOS_DCSP: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 828 | model_str = "LP11002-SP 4Gb 2-port PCI-X2"; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 829 | break; |
| 830 | case PCI_DEVICE_ID_NEPTUNE: |
| 831 | if (hdrtype == 0x80) |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 832 | model_str = "LPe1002 4Gb 2-port"; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 833 | else |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 834 | model_str = "LPe1000 4Gb PCIe"; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 835 | break; |
| 836 | case PCI_DEVICE_ID_NEPTUNE_SCSP: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 837 | model_str = "LPe1000-SP 4Gb PCIe"; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 838 | break; |
| 839 | case PCI_DEVICE_ID_NEPTUNE_DCSP: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 840 | model_str = "LPe1002-SP 4Gb 2-port PCIe"; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 841 | break; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 842 | case PCI_DEVICE_ID_BMID: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 843 | model_str = "LP1150 4Gb PCI-X2"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 844 | break; |
| 845 | case PCI_DEVICE_ID_BSMB: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 846 | model_str = "LP111 4Gb PCI-X2"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 847 | break; |
| 848 | case PCI_DEVICE_ID_ZEPHYR: |
James.Smart@Emulex.Com | 964b77e | 2005-10-28 20:29:01 -0400 | [diff] [blame] | 849 | if (hdrtype == 0x80) |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 850 | model_str = "LPe11002 4Gb 2-port PCIe"; |
James.Smart@Emulex.Com | 964b77e | 2005-10-28 20:29:01 -0400 | [diff] [blame] | 851 | else |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 852 | model_str = "LPe11000 4Gb PCIe"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 853 | break; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 854 | case PCI_DEVICE_ID_ZEPHYR_SCSP: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 855 | model_str = "LPe11000-SP 4Gb PCIe"; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 856 | break; |
| 857 | case PCI_DEVICE_ID_ZEPHYR_DCSP: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 858 | model_str = "LPe11002-SP 4Gb 2-port PCIe"; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 859 | break; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 860 | case PCI_DEVICE_ID_ZMID: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 861 | model_str = "LPe1150 4Gb PCIe"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 862 | break; |
| 863 | case PCI_DEVICE_ID_ZSMB: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 864 | model_str = "LPe111 4Gb PCIe"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 865 | break; |
| 866 | case PCI_DEVICE_ID_LP101: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 867 | model_str = "LP101 2Gb PCI-X"; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 868 | break; |
| 869 | case PCI_DEVICE_ID_LP10000S: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 870 | model_str = "LP10000-S 2Gb PCI"; |
James.Smart@Emulex.Com | 06325e7 | 2005-06-25 10:34:22 -0400 | [diff] [blame] | 871 | break; |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 872 | case PCI_DEVICE_ID_LP11000S: |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 873 | case PCI_DEVICE_ID_LPE11000S: |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 874 | pci_read_config_word(phba->pcidev, PCI_SUBSYSTEM_ID, |
| 875 | &dev_subid); |
| 876 | switch (dev_subid) { |
| 877 | case PCI_SUBSYSTEM_ID_LP11000S: |
| 878 | model_str = "LP11002-S 4Gb PCI-X2"; |
| 879 | break; |
| 880 | case PCI_SUBSYSTEM_ID_LP11002S: |
| 881 | model_str = "LP11000-S 4Gb 2-port PCI-X2"; |
| 882 | break; |
| 883 | case PCI_SUBSYSTEM_ID_LPE11000S: |
| 884 | model_str = "LPe11002-S 4Gb PCIe"; |
| 885 | break; |
| 886 | case PCI_SUBSYSTEM_ID_LPE11002S: |
| 887 | model_str = "LPe11002-S 4Gb 2-port PCIe"; |
| 888 | break; |
| 889 | case PCI_SUBSYSTEM_ID_LPE11010S: |
| 890 | model_str = "LPe11010-S 4Gb 10-port PCIe"; |
| 891 | break; |
| 892 | default: |
| 893 | break; |
| 894 | } |
| 895 | break; |
| 896 | default: |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 897 | break; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 898 | } |
| 899 | if (mdp) |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 900 | sscanf(model_str, "%s", mdp); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 901 | if (descp) |
James.Smart@Emulex.Com | 5cc36b3 | 2005-11-28 11:42:19 -0500 | [diff] [blame] | 902 | sprintf(descp, "Emulex %s Fibre Channel Adapter", model_str); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 903 | } |
| 904 | |
| 905 | /**************************************************/ |
| 906 | /* lpfc_post_buffer */ |
| 907 | /* */ |
| 908 | /* This routine will post count buffers to the */ |
| 909 | /* ring with the QUE_RING_BUF_CN command. This */ |
| 910 | /* allows 3 buffers / command to be posted. */ |
| 911 | /* Returns the number of buffers NOT posted. */ |
| 912 | /**************************************************/ |
| 913 | int |
| 914 | lpfc_post_buffer(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, int cnt, |
| 915 | int type) |
| 916 | { |
| 917 | IOCB_t *icmd; |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 918 | struct lpfc_iocbq *iocb; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 919 | struct lpfc_dmabuf *mp1, *mp2; |
| 920 | |
| 921 | cnt += pring->missbufcnt; |
| 922 | |
| 923 | /* While there are buffers to post */ |
| 924 | while (cnt > 0) { |
| 925 | /* Allocate buffer for command iocb */ |
| 926 | spin_lock_irq(phba->host->host_lock); |
James.Smart@Emulex.Com | 0bd4ca2 | 2005-10-28 20:30:02 -0400 | [diff] [blame] | 927 | iocb = lpfc_sli_get_iocbq(phba); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 928 | spin_unlock_irq(phba->host->host_lock); |
| 929 | if (iocb == NULL) { |
| 930 | pring->missbufcnt = cnt; |
| 931 | return cnt; |
| 932 | } |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 933 | icmd = &iocb->iocb; |
| 934 | |
| 935 | /* 2 buffers can be posted per command */ |
| 936 | /* Allocate buffer to post */ |
| 937 | mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL); |
| 938 | if (mp1) |
| 939 | mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI, |
| 940 | &mp1->phys); |
| 941 | if (mp1 == 0 || mp1->virt == 0) { |
Jesper Juhl | c9475cb | 2005-11-07 01:01:26 -0800 | [diff] [blame] | 942 | kfree(mp1); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 943 | spin_lock_irq(phba->host->host_lock); |
James Bottomley | 604a3e3 | 2005-10-29 10:28:33 -0500 | [diff] [blame] | 944 | lpfc_sli_release_iocbq(phba, iocb); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 945 | spin_unlock_irq(phba->host->host_lock); |
| 946 | pring->missbufcnt = cnt; |
| 947 | return cnt; |
| 948 | } |
| 949 | |
| 950 | INIT_LIST_HEAD(&mp1->list); |
| 951 | /* Allocate buffer to post */ |
| 952 | if (cnt > 1) { |
| 953 | mp2 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL); |
| 954 | if (mp2) |
| 955 | mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI, |
| 956 | &mp2->phys); |
| 957 | if (mp2 == 0 || mp2->virt == 0) { |
Jesper Juhl | c9475cb | 2005-11-07 01:01:26 -0800 | [diff] [blame] | 958 | kfree(mp2); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 959 | lpfc_mbuf_free(phba, mp1->virt, mp1->phys); |
| 960 | kfree(mp1); |
| 961 | spin_lock_irq(phba->host->host_lock); |
James Bottomley | 604a3e3 | 2005-10-29 10:28:33 -0500 | [diff] [blame] | 962 | lpfc_sli_release_iocbq(phba, iocb); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 963 | spin_unlock_irq(phba->host->host_lock); |
| 964 | pring->missbufcnt = cnt; |
| 965 | return cnt; |
| 966 | } |
| 967 | |
| 968 | INIT_LIST_HEAD(&mp2->list); |
| 969 | } else { |
| 970 | mp2 = NULL; |
| 971 | } |
| 972 | |
| 973 | icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys); |
| 974 | icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys); |
| 975 | icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE; |
| 976 | icmd->ulpBdeCount = 1; |
| 977 | cnt--; |
| 978 | if (mp2) { |
| 979 | icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys); |
| 980 | icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys); |
| 981 | icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE; |
| 982 | cnt--; |
| 983 | icmd->ulpBdeCount = 2; |
| 984 | } |
| 985 | |
| 986 | icmd->ulpCommand = CMD_QUE_RING_BUF64_CN; |
| 987 | icmd->ulpLe = 1; |
| 988 | |
| 989 | spin_lock_irq(phba->host->host_lock); |
| 990 | if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) { |
| 991 | lpfc_mbuf_free(phba, mp1->virt, mp1->phys); |
| 992 | kfree(mp1); |
| 993 | cnt++; |
| 994 | if (mp2) { |
| 995 | lpfc_mbuf_free(phba, mp2->virt, mp2->phys); |
| 996 | kfree(mp2); |
| 997 | cnt++; |
| 998 | } |
James Bottomley | 604a3e3 | 2005-10-29 10:28:33 -0500 | [diff] [blame] | 999 | lpfc_sli_release_iocbq(phba, iocb); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1000 | pring->missbufcnt = cnt; |
| 1001 | spin_unlock_irq(phba->host->host_lock); |
| 1002 | return cnt; |
| 1003 | } |
| 1004 | spin_unlock_irq(phba->host->host_lock); |
| 1005 | lpfc_sli_ringpostbuf_put(phba, pring, mp1); |
| 1006 | if (mp2) { |
| 1007 | lpfc_sli_ringpostbuf_put(phba, pring, mp2); |
| 1008 | } |
| 1009 | } |
| 1010 | pring->missbufcnt = 0; |
| 1011 | return 0; |
| 1012 | } |
| 1013 | |
| 1014 | /************************************************************************/ |
| 1015 | /* */ |
| 1016 | /* lpfc_post_rcv_buf */ |
| 1017 | /* This routine post initial rcv buffers to the configured rings */ |
| 1018 | /* */ |
| 1019 | /************************************************************************/ |
| 1020 | static int |
| 1021 | lpfc_post_rcv_buf(struct lpfc_hba * phba) |
| 1022 | { |
| 1023 | struct lpfc_sli *psli = &phba->sli; |
| 1024 | |
| 1025 | /* Ring 0, ELS / CT buffers */ |
| 1026 | lpfc_post_buffer(phba, &psli->ring[LPFC_ELS_RING], LPFC_BUF_RING0, 1); |
| 1027 | /* Ring 2 - FCP no buffers needed */ |
| 1028 | |
| 1029 | return 0; |
| 1030 | } |
| 1031 | |
| 1032 | #define S(N,V) (((V)<<(N))|((V)>>(32-(N)))) |
| 1033 | |
| 1034 | /************************************************************************/ |
| 1035 | /* */ |
| 1036 | /* lpfc_sha_init */ |
| 1037 | /* */ |
| 1038 | /************************************************************************/ |
| 1039 | static void |
| 1040 | lpfc_sha_init(uint32_t * HashResultPointer) |
| 1041 | { |
| 1042 | HashResultPointer[0] = 0x67452301; |
| 1043 | HashResultPointer[1] = 0xEFCDAB89; |
| 1044 | HashResultPointer[2] = 0x98BADCFE; |
| 1045 | HashResultPointer[3] = 0x10325476; |
| 1046 | HashResultPointer[4] = 0xC3D2E1F0; |
| 1047 | } |
| 1048 | |
| 1049 | /************************************************************************/ |
| 1050 | /* */ |
| 1051 | /* lpfc_sha_iterate */ |
| 1052 | /* */ |
| 1053 | /************************************************************************/ |
| 1054 | static void |
| 1055 | lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer) |
| 1056 | { |
| 1057 | int t; |
| 1058 | uint32_t TEMP; |
| 1059 | uint32_t A, B, C, D, E; |
| 1060 | t = 16; |
| 1061 | do { |
| 1062 | HashWorkingPointer[t] = |
| 1063 | S(1, |
| 1064 | HashWorkingPointer[t - 3] ^ HashWorkingPointer[t - |
| 1065 | 8] ^ |
| 1066 | HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]); |
| 1067 | } while (++t <= 79); |
| 1068 | t = 0; |
| 1069 | A = HashResultPointer[0]; |
| 1070 | B = HashResultPointer[1]; |
| 1071 | C = HashResultPointer[2]; |
| 1072 | D = HashResultPointer[3]; |
| 1073 | E = HashResultPointer[4]; |
| 1074 | |
| 1075 | do { |
| 1076 | if (t < 20) { |
| 1077 | TEMP = ((B & C) | ((~B) & D)) + 0x5A827999; |
| 1078 | } else if (t < 40) { |
| 1079 | TEMP = (B ^ C ^ D) + 0x6ED9EBA1; |
| 1080 | } else if (t < 60) { |
| 1081 | TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC; |
| 1082 | } else { |
| 1083 | TEMP = (B ^ C ^ D) + 0xCA62C1D6; |
| 1084 | } |
| 1085 | TEMP += S(5, A) + E + HashWorkingPointer[t]; |
| 1086 | E = D; |
| 1087 | D = C; |
| 1088 | C = S(30, B); |
| 1089 | B = A; |
| 1090 | A = TEMP; |
| 1091 | } while (++t <= 79); |
| 1092 | |
| 1093 | HashResultPointer[0] += A; |
| 1094 | HashResultPointer[1] += B; |
| 1095 | HashResultPointer[2] += C; |
| 1096 | HashResultPointer[3] += D; |
| 1097 | HashResultPointer[4] += E; |
| 1098 | |
| 1099 | } |
| 1100 | |
| 1101 | /************************************************************************/ |
| 1102 | /* */ |
| 1103 | /* lpfc_challenge_key */ |
| 1104 | /* */ |
| 1105 | /************************************************************************/ |
| 1106 | static void |
| 1107 | lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking) |
| 1108 | { |
| 1109 | *HashWorking = (*RandomChallenge ^ *HashWorking); |
| 1110 | } |
| 1111 | |
| 1112 | /************************************************************************/ |
| 1113 | /* */ |
| 1114 | /* lpfc_hba_init */ |
| 1115 | /* */ |
| 1116 | /************************************************************************/ |
| 1117 | void |
| 1118 | lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit) |
| 1119 | { |
| 1120 | int t; |
| 1121 | uint32_t *HashWorking; |
| 1122 | uint32_t *pwwnn = phba->wwnn; |
| 1123 | |
| 1124 | HashWorking = kmalloc(80 * sizeof(uint32_t), GFP_KERNEL); |
| 1125 | if (!HashWorking) |
| 1126 | return; |
| 1127 | |
| 1128 | memset(HashWorking, 0, (80 * sizeof(uint32_t))); |
| 1129 | HashWorking[0] = HashWorking[78] = *pwwnn++; |
| 1130 | HashWorking[1] = HashWorking[79] = *pwwnn; |
| 1131 | |
| 1132 | for (t = 0; t < 7; t++) |
| 1133 | lpfc_challenge_key(phba->RandomData + t, HashWorking + t); |
| 1134 | |
| 1135 | lpfc_sha_init(hbainit); |
| 1136 | lpfc_sha_iterate(hbainit, HashWorking); |
| 1137 | kfree(HashWorking); |
| 1138 | } |
| 1139 | |
| 1140 | static void |
| 1141 | lpfc_cleanup(struct lpfc_hba * phba, uint32_t save_bind) |
| 1142 | { |
| 1143 | struct lpfc_nodelist *ndlp, *next_ndlp; |
| 1144 | |
| 1145 | /* clean up phba - lpfc specific */ |
| 1146 | lpfc_can_disctmo(phba); |
| 1147 | list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_nlpunmap_list, |
| 1148 | nlp_listp) { |
| 1149 | lpfc_nlp_remove(phba, ndlp); |
| 1150 | } |
| 1151 | |
| 1152 | list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_nlpmap_list, |
| 1153 | nlp_listp) { |
| 1154 | lpfc_nlp_remove(phba, ndlp); |
| 1155 | } |
| 1156 | |
| 1157 | list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_unused_list, |
| 1158 | nlp_listp) { |
| 1159 | lpfc_nlp_list(phba, ndlp, NLP_NO_LIST); |
| 1160 | } |
| 1161 | |
| 1162 | list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_plogi_list, |
| 1163 | nlp_listp) { |
| 1164 | lpfc_nlp_remove(phba, ndlp); |
| 1165 | } |
| 1166 | |
| 1167 | list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_adisc_list, |
| 1168 | nlp_listp) { |
| 1169 | lpfc_nlp_remove(phba, ndlp); |
| 1170 | } |
| 1171 | |
| 1172 | list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_reglogin_list, |
| 1173 | nlp_listp) { |
| 1174 | lpfc_nlp_remove(phba, ndlp); |
| 1175 | } |
| 1176 | |
| 1177 | list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_prli_list, |
| 1178 | nlp_listp) { |
| 1179 | lpfc_nlp_remove(phba, ndlp); |
| 1180 | } |
| 1181 | |
| 1182 | list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_npr_list, |
| 1183 | nlp_listp) { |
| 1184 | lpfc_nlp_remove(phba, ndlp); |
| 1185 | } |
| 1186 | |
| 1187 | INIT_LIST_HEAD(&phba->fc_nlpmap_list); |
| 1188 | INIT_LIST_HEAD(&phba->fc_nlpunmap_list); |
| 1189 | INIT_LIST_HEAD(&phba->fc_unused_list); |
| 1190 | INIT_LIST_HEAD(&phba->fc_plogi_list); |
| 1191 | INIT_LIST_HEAD(&phba->fc_adisc_list); |
| 1192 | INIT_LIST_HEAD(&phba->fc_reglogin_list); |
| 1193 | INIT_LIST_HEAD(&phba->fc_prli_list); |
| 1194 | INIT_LIST_HEAD(&phba->fc_npr_list); |
| 1195 | |
| 1196 | phba->fc_map_cnt = 0; |
| 1197 | phba->fc_unmap_cnt = 0; |
| 1198 | phba->fc_plogi_cnt = 0; |
| 1199 | phba->fc_adisc_cnt = 0; |
| 1200 | phba->fc_reglogin_cnt = 0; |
| 1201 | phba->fc_prli_cnt = 0; |
| 1202 | phba->fc_npr_cnt = 0; |
| 1203 | phba->fc_unused_cnt= 0; |
| 1204 | return; |
| 1205 | } |
| 1206 | |
| 1207 | static void |
| 1208 | lpfc_establish_link_tmo(unsigned long ptr) |
| 1209 | { |
| 1210 | struct lpfc_hba *phba = (struct lpfc_hba *)ptr; |
| 1211 | unsigned long iflag; |
| 1212 | |
| 1213 | |
| 1214 | /* Re-establishing Link, timer expired */ |
| 1215 | lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT, |
| 1216 | "%d:1300 Re-establishing Link, timer expired " |
| 1217 | "Data: x%x x%x\n", |
| 1218 | phba->brd_no, phba->fc_flag, phba->hba_state); |
| 1219 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 1220 | phba->fc_flag &= ~FC_ESTABLISH_LINK; |
| 1221 | spin_unlock_irqrestore(phba->host->host_lock, iflag); |
| 1222 | } |
| 1223 | |
| 1224 | static int |
| 1225 | lpfc_stop_timer(struct lpfc_hba * phba) |
| 1226 | { |
| 1227 | struct lpfc_sli *psli = &phba->sli; |
| 1228 | |
| 1229 | /* Instead of a timer, this has been converted to a |
| 1230 | * deferred procedding list. |
| 1231 | */ |
| 1232 | while (!list_empty(&phba->freebufList)) { |
| 1233 | |
| 1234 | struct lpfc_dmabuf *mp = NULL; |
| 1235 | |
| 1236 | list_remove_head((&phba->freebufList), mp, |
| 1237 | struct lpfc_dmabuf, list); |
| 1238 | if (mp) { |
| 1239 | lpfc_mbuf_free(phba, mp->virt, mp->phys); |
| 1240 | kfree(mp); |
| 1241 | } |
| 1242 | } |
| 1243 | |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame^] | 1244 | del_timer_sync(&phba->fcp_poll_timer); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1245 | del_timer_sync(&phba->fc_estabtmo); |
| 1246 | del_timer_sync(&phba->fc_disctmo); |
| 1247 | del_timer_sync(&phba->fc_fdmitmo); |
| 1248 | del_timer_sync(&phba->els_tmofunc); |
| 1249 | psli = &phba->sli; |
| 1250 | del_timer_sync(&psli->mbox_tmo); |
| 1251 | return(1); |
| 1252 | } |
| 1253 | |
| 1254 | int |
| 1255 | lpfc_online(struct lpfc_hba * phba) |
| 1256 | { |
| 1257 | if (!phba) |
| 1258 | return 0; |
| 1259 | |
| 1260 | if (!(phba->fc_flag & FC_OFFLINE_MODE)) |
| 1261 | return 0; |
| 1262 | |
| 1263 | lpfc_printf_log(phba, |
| 1264 | KERN_WARNING, |
| 1265 | LOG_INIT, |
| 1266 | "%d:0458 Bring Adapter online\n", |
| 1267 | phba->brd_no); |
| 1268 | |
| 1269 | if (!lpfc_sli_queue_setup(phba)) |
| 1270 | return 1; |
| 1271 | |
| 1272 | if (lpfc_sli_hba_setup(phba)) /* Initialize the HBA */ |
| 1273 | return 1; |
| 1274 | |
| 1275 | spin_lock_irq(phba->host->host_lock); |
| 1276 | phba->fc_flag &= ~FC_OFFLINE_MODE; |
| 1277 | spin_unlock_irq(phba->host->host_lock); |
| 1278 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1279 | return 0; |
| 1280 | } |
| 1281 | |
| 1282 | int |
| 1283 | lpfc_offline(struct lpfc_hba * phba) |
| 1284 | { |
| 1285 | struct lpfc_sli_ring *pring; |
| 1286 | struct lpfc_sli *psli; |
| 1287 | unsigned long iflag; |
| 1288 | int i = 0; |
| 1289 | |
| 1290 | if (!phba) |
| 1291 | return 0; |
| 1292 | |
| 1293 | if (phba->fc_flag & FC_OFFLINE_MODE) |
| 1294 | return 0; |
| 1295 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1296 | psli = &phba->sli; |
| 1297 | pring = &psli->ring[psli->fcp_ring]; |
| 1298 | |
| 1299 | lpfc_linkdown(phba); |
| 1300 | |
| 1301 | /* The linkdown event takes 30 seconds to timeout. */ |
| 1302 | while (pring->txcmplq_cnt) { |
| 1303 | mdelay(10); |
| 1304 | if (i++ > 3000) |
| 1305 | break; |
| 1306 | } |
| 1307 | |
| 1308 | /* stop all timers associated with this hba */ |
| 1309 | lpfc_stop_timer(phba); |
| 1310 | phba->work_hba_events = 0; |
| 1311 | |
| 1312 | lpfc_printf_log(phba, |
| 1313 | KERN_WARNING, |
| 1314 | LOG_INIT, |
| 1315 | "%d:0460 Bring Adapter offline\n", |
| 1316 | phba->brd_no); |
| 1317 | |
| 1318 | /* Bring down the SLI Layer and cleanup. The HBA is offline |
| 1319 | now. */ |
| 1320 | lpfc_sli_hba_down(phba); |
| 1321 | lpfc_cleanup(phba, 1); |
| 1322 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 1323 | phba->fc_flag |= FC_OFFLINE_MODE; |
| 1324 | spin_unlock_irqrestore(phba->host->host_lock, iflag); |
| 1325 | return 0; |
| 1326 | } |
| 1327 | |
| 1328 | /****************************************************************************** |
| 1329 | * Function name: lpfc_scsi_free |
| 1330 | * |
| 1331 | * Description: Called from lpfc_pci_remove_one free internal driver resources |
| 1332 | * |
| 1333 | ******************************************************************************/ |
| 1334 | static int |
| 1335 | lpfc_scsi_free(struct lpfc_hba * phba) |
| 1336 | { |
| 1337 | struct lpfc_scsi_buf *sb, *sb_next; |
| 1338 | struct lpfc_iocbq *io, *io_next; |
| 1339 | |
| 1340 | spin_lock_irq(phba->host->host_lock); |
| 1341 | /* Release all the lpfc_scsi_bufs maintained by this host. */ |
| 1342 | list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) { |
| 1343 | list_del(&sb->list); |
| 1344 | pci_pool_free(phba->lpfc_scsi_dma_buf_pool, sb->data, |
| 1345 | sb->dma_handle); |
| 1346 | kfree(sb); |
| 1347 | phba->total_scsi_bufs--; |
| 1348 | } |
| 1349 | |
| 1350 | /* Release all the lpfc_iocbq entries maintained by this host. */ |
| 1351 | list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) { |
| 1352 | list_del(&io->list); |
| 1353 | kfree(io); |
| 1354 | phba->total_iocbq_bufs--; |
| 1355 | } |
| 1356 | |
| 1357 | spin_unlock_irq(phba->host->host_lock); |
| 1358 | |
| 1359 | return 0; |
| 1360 | } |
| 1361 | |
| 1362 | |
| 1363 | static int __devinit |
| 1364 | lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid) |
| 1365 | { |
| 1366 | struct Scsi_Host *host; |
| 1367 | struct lpfc_hba *phba; |
| 1368 | struct lpfc_sli *psli; |
| 1369 | struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL; |
| 1370 | unsigned long bar0map_len, bar2map_len; |
| 1371 | int error = -ENODEV, retval; |
| 1372 | int i; |
James Bottomley | 604a3e3 | 2005-10-29 10:28:33 -0500 | [diff] [blame] | 1373 | uint16_t iotag; |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1374 | |
| 1375 | if (pci_enable_device(pdev)) |
| 1376 | goto out; |
| 1377 | if (pci_request_regions(pdev, LPFC_DRIVER_NAME)) |
| 1378 | goto out_disable_device; |
| 1379 | |
James.Smart@Emulex.Com | f888ba3 | 2005-08-10 15:03:01 -0400 | [diff] [blame] | 1380 | host = scsi_host_alloc(&lpfc_template, sizeof (struct lpfc_hba)); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1381 | if (!host) |
| 1382 | goto out_release_regions; |
| 1383 | |
| 1384 | phba = (struct lpfc_hba*)host->hostdata; |
| 1385 | memset(phba, 0, sizeof (struct lpfc_hba)); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1386 | phba->host = host; |
| 1387 | |
| 1388 | phba->fc_flag |= FC_LOADING; |
| 1389 | phba->pcidev = pdev; |
| 1390 | |
| 1391 | /* Assign an unused board number */ |
| 1392 | if (!idr_pre_get(&lpfc_hba_index, GFP_KERNEL)) |
| 1393 | goto out_put_host; |
| 1394 | |
| 1395 | error = idr_get_new(&lpfc_hba_index, NULL, &phba->brd_no); |
| 1396 | if (error) |
| 1397 | goto out_put_host; |
| 1398 | |
| 1399 | host->unique_id = phba->brd_no; |
James.Smart@Emulex.Com | 6175c02 | 2005-11-28 11:42:05 -0500 | [diff] [blame] | 1400 | init_MUTEX(&phba->hba_can_block); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1401 | INIT_LIST_HEAD(&phba->ctrspbuflist); |
| 1402 | INIT_LIST_HEAD(&phba->rnidrspbuflist); |
| 1403 | INIT_LIST_HEAD(&phba->freebufList); |
| 1404 | |
| 1405 | /* Initialize timers used by driver */ |
| 1406 | init_timer(&phba->fc_estabtmo); |
| 1407 | phba->fc_estabtmo.function = lpfc_establish_link_tmo; |
| 1408 | phba->fc_estabtmo.data = (unsigned long)phba; |
| 1409 | init_timer(&phba->fc_disctmo); |
| 1410 | phba->fc_disctmo.function = lpfc_disc_timeout; |
| 1411 | phba->fc_disctmo.data = (unsigned long)phba; |
| 1412 | |
| 1413 | init_timer(&phba->fc_fdmitmo); |
| 1414 | phba->fc_fdmitmo.function = lpfc_fdmi_tmo; |
| 1415 | phba->fc_fdmitmo.data = (unsigned long)phba; |
| 1416 | init_timer(&phba->els_tmofunc); |
| 1417 | phba->els_tmofunc.function = lpfc_els_timeout; |
| 1418 | phba->els_tmofunc.data = (unsigned long)phba; |
| 1419 | psli = &phba->sli; |
| 1420 | init_timer(&psli->mbox_tmo); |
| 1421 | psli->mbox_tmo.function = lpfc_mbox_timeout; |
| 1422 | psli->mbox_tmo.data = (unsigned long)phba; |
| 1423 | |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame^] | 1424 | init_timer(&phba->fcp_poll_timer); |
| 1425 | phba->fcp_poll_timer.function = lpfc_poll_timeout; |
| 1426 | phba->fcp_poll_timer.data = (unsigned long)phba; |
| 1427 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1428 | /* |
| 1429 | * Get all the module params for configuring this host and then |
| 1430 | * establish the host parameters. |
| 1431 | */ |
| 1432 | lpfc_get_cfgparam(phba); |
| 1433 | |
| 1434 | host->max_id = LPFC_MAX_TARGET; |
| 1435 | host->max_lun = phba->cfg_max_luns; |
| 1436 | host->this_id = -1; |
| 1437 | |
| 1438 | /* Initialize all internally managed lists. */ |
| 1439 | INIT_LIST_HEAD(&phba->fc_nlpmap_list); |
| 1440 | INIT_LIST_HEAD(&phba->fc_nlpunmap_list); |
| 1441 | INIT_LIST_HEAD(&phba->fc_unused_list); |
| 1442 | INIT_LIST_HEAD(&phba->fc_plogi_list); |
| 1443 | INIT_LIST_HEAD(&phba->fc_adisc_list); |
| 1444 | INIT_LIST_HEAD(&phba->fc_reglogin_list); |
| 1445 | INIT_LIST_HEAD(&phba->fc_prli_list); |
| 1446 | INIT_LIST_HEAD(&phba->fc_npr_list); |
| 1447 | |
| 1448 | |
| 1449 | pci_set_master(pdev); |
| 1450 | retval = pci_set_mwi(pdev); |
| 1451 | if (retval) |
| 1452 | dev_printk(KERN_WARNING, &pdev->dev, |
| 1453 | "Warning: pci_set_mwi returned %d\n", retval); |
| 1454 | |
| 1455 | if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0) |
| 1456 | if (pci_set_dma_mask(phba->pcidev, DMA_32BIT_MASK) != 0) |
| 1457 | goto out_idr_remove; |
| 1458 | |
| 1459 | /* |
| 1460 | * Get the bus address of Bar0 and Bar2 and the number of bytes |
| 1461 | * required by each mapping. |
| 1462 | */ |
| 1463 | phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0); |
| 1464 | bar0map_len = pci_resource_len(phba->pcidev, 0); |
| 1465 | |
| 1466 | phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2); |
| 1467 | bar2map_len = pci_resource_len(phba->pcidev, 2); |
| 1468 | |
| 1469 | /* Map HBA SLIM and Control Registers to a kernel virtual address. */ |
| 1470 | phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len); |
| 1471 | phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len); |
| 1472 | |
| 1473 | /* Allocate memory for SLI-2 structures */ |
| 1474 | phba->slim2p = dma_alloc_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE, |
| 1475 | &phba->slim2p_mapping, GFP_KERNEL); |
| 1476 | if (!phba->slim2p) |
| 1477 | goto out_iounmap; |
| 1478 | |
James.Smart@Emulex.Com | f91b392 | 2005-10-28 20:29:28 -0400 | [diff] [blame] | 1479 | memset(phba->slim2p, 0, SLI2_SLIM_SIZE); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1480 | |
| 1481 | /* Initialize the SLI Layer to run with lpfc HBAs. */ |
| 1482 | lpfc_sli_setup(phba); |
| 1483 | lpfc_sli_queue_setup(phba); |
| 1484 | |
| 1485 | error = lpfc_mem_alloc(phba); |
| 1486 | if (error) |
| 1487 | goto out_free_slim; |
| 1488 | |
| 1489 | /* Initialize and populate the iocb list per host. */ |
| 1490 | INIT_LIST_HEAD(&phba->lpfc_iocb_list); |
| 1491 | for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) { |
| 1492 | iocbq_entry = kmalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL); |
| 1493 | if (iocbq_entry == NULL) { |
| 1494 | printk(KERN_ERR "%s: only allocated %d iocbs of " |
| 1495 | "expected %d count. Unloading driver.\n", |
| 1496 | __FUNCTION__, i, LPFC_IOCB_LIST_CNT); |
| 1497 | error = -ENOMEM; |
| 1498 | goto out_free_iocbq; |
| 1499 | } |
| 1500 | |
| 1501 | memset(iocbq_entry, 0, sizeof(struct lpfc_iocbq)); |
James Bottomley | 604a3e3 | 2005-10-29 10:28:33 -0500 | [diff] [blame] | 1502 | iotag = lpfc_sli_next_iotag(phba, iocbq_entry); |
| 1503 | if (iotag == 0) { |
| 1504 | kfree (iocbq_entry); |
| 1505 | printk(KERN_ERR "%s: failed to allocate IOTAG. " |
| 1506 | "Unloading driver.\n", |
| 1507 | __FUNCTION__); |
| 1508 | error = -ENOMEM; |
| 1509 | goto out_free_iocbq; |
| 1510 | } |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1511 | spin_lock_irq(phba->host->host_lock); |
| 1512 | list_add(&iocbq_entry->list, &phba->lpfc_iocb_list); |
| 1513 | phba->total_iocbq_bufs++; |
| 1514 | spin_unlock_irq(phba->host->host_lock); |
| 1515 | } |
| 1516 | |
| 1517 | /* Initialize HBA structure */ |
| 1518 | phba->fc_edtov = FF_DEF_EDTOV; |
| 1519 | phba->fc_ratov = FF_DEF_RATOV; |
| 1520 | phba->fc_altov = FF_DEF_ALTOV; |
| 1521 | phba->fc_arbtov = FF_DEF_ARBTOV; |
| 1522 | |
| 1523 | INIT_LIST_HEAD(&phba->work_list); |
| 1524 | phba->work_ha_mask = (HA_ERATT|HA_MBATT|HA_LATT); |
| 1525 | phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4)); |
| 1526 | |
| 1527 | /* Startup the kernel thread for this host adapter. */ |
| 1528 | phba->worker_thread = kthread_run(lpfc_do_work, phba, |
| 1529 | "lpfc_worker_%d", phba->brd_no); |
| 1530 | if (IS_ERR(phba->worker_thread)) { |
| 1531 | error = PTR_ERR(phba->worker_thread); |
| 1532 | goto out_free_iocbq; |
| 1533 | } |
| 1534 | |
| 1535 | /* We can rely on a queue depth attribute only after SLI HBA setup */ |
| 1536 | host->can_queue = phba->cfg_hba_queue_depth - 10; |
| 1537 | |
| 1538 | /* Tell the midlayer we support 16 byte commands */ |
| 1539 | host->max_cmd_len = 16; |
| 1540 | |
| 1541 | /* Initialize the list of scsi buffers used by driver for scsi IO. */ |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame^] | 1542 | spin_lock_init(&phba->scsi_buf_list_lock); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1543 | INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list); |
| 1544 | |
| 1545 | host->transportt = lpfc_transport_template; |
| 1546 | host->hostdata[0] = (unsigned long)phba; |
| 1547 | pci_set_drvdata(pdev, host); |
| 1548 | error = scsi_add_host(host, &pdev->dev); |
| 1549 | if (error) |
| 1550 | goto out_kthread_stop; |
| 1551 | |
| 1552 | error = lpfc_alloc_sysfs_attr(phba); |
| 1553 | if (error) |
| 1554 | goto out_kthread_stop; |
| 1555 | |
| 1556 | error = request_irq(phba->pcidev->irq, lpfc_intr_handler, SA_SHIRQ, |
| 1557 | LPFC_DRIVER_NAME, phba); |
| 1558 | if (error) { |
| 1559 | lpfc_printf_log(phba, KERN_ERR, LOG_INIT, |
| 1560 | "%d:0451 Enable interrupt handler failed\n", |
| 1561 | phba->brd_no); |
| 1562 | goto out_free_sysfs_attr; |
| 1563 | } |
| 1564 | phba->MBslimaddr = phba->slim_memmap_p; |
| 1565 | phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET; |
| 1566 | phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET; |
| 1567 | phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET; |
| 1568 | phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET; |
| 1569 | |
| 1570 | error = lpfc_sli_hba_setup(phba); |
| 1571 | if (error) |
| 1572 | goto out_free_irq; |
| 1573 | |
James.Smart@Emulex.Com | 875fbdf | 2005-11-29 16:32:13 -0500 | [diff] [blame^] | 1574 | if (phba->cfg_poll & DISABLE_FCP_RING_INT) { |
| 1575 | spin_lock_irq(phba->host->host_lock); |
| 1576 | lpfc_poll_start_timer(phba); |
| 1577 | spin_unlock_irq(phba->host->host_lock); |
| 1578 | } |
| 1579 | |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1580 | /* |
| 1581 | * set fixed host attributes |
| 1582 | * Must done after lpfc_sli_hba_setup() |
| 1583 | */ |
| 1584 | |
Andrew Morton | 68ce1eb | 2005-09-21 09:46:54 -0700 | [diff] [blame] | 1585 | fc_host_node_name(host) = wwn_to_u64(phba->fc_nodename.u.wwn); |
| 1586 | fc_host_port_name(host) = wwn_to_u64(phba->fc_portname.u.wwn); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1587 | fc_host_supported_classes(host) = FC_COS_CLASS3; |
| 1588 | |
| 1589 | memset(fc_host_supported_fc4s(host), 0, |
| 1590 | sizeof(fc_host_supported_fc4s(host))); |
| 1591 | fc_host_supported_fc4s(host)[2] = 1; |
| 1592 | fc_host_supported_fc4s(host)[7] = 1; |
| 1593 | |
| 1594 | lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(host)); |
| 1595 | |
| 1596 | fc_host_supported_speeds(host) = 0; |
| 1597 | switch (FC_JEDEC_ID(phba->vpd.rev.biuRev)) { |
| 1598 | case VIPER_JEDEC_ID: |
| 1599 | fc_host_supported_speeds(host) |= FC_PORTSPEED_10GBIT; |
| 1600 | break; |
| 1601 | case HELIOS_JEDEC_ID: |
| 1602 | fc_host_supported_speeds(host) |= FC_PORTSPEED_4GBIT; |
| 1603 | /* Fall through */ |
| 1604 | case CENTAUR_2G_JEDEC_ID: |
| 1605 | case PEGASUS_JEDEC_ID: |
| 1606 | case THOR_JEDEC_ID: |
| 1607 | fc_host_supported_speeds(host) |= FC_PORTSPEED_2GBIT; |
| 1608 | /* Fall through */ |
| 1609 | default: |
| 1610 | fc_host_supported_speeds(host) = FC_PORTSPEED_1GBIT; |
| 1611 | } |
| 1612 | |
| 1613 | fc_host_maxframe_size(host) = |
| 1614 | ((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) | |
| 1615 | (uint32_t) phba->fc_sparam.cmn.bbRcvSizeLsb); |
| 1616 | |
| 1617 | /* This value is also unchanging */ |
| 1618 | memset(fc_host_active_fc4s(host), 0, |
| 1619 | sizeof(fc_host_active_fc4s(host))); |
| 1620 | fc_host_active_fc4s(host)[2] = 1; |
| 1621 | fc_host_active_fc4s(host)[7] = 1; |
| 1622 | |
| 1623 | spin_lock_irq(phba->host->host_lock); |
| 1624 | phba->fc_flag &= ~FC_LOADING; |
| 1625 | spin_unlock_irq(phba->host->host_lock); |
| 1626 | return 0; |
| 1627 | |
| 1628 | out_free_irq: |
| 1629 | lpfc_stop_timer(phba); |
| 1630 | phba->work_hba_events = 0; |
| 1631 | free_irq(phba->pcidev->irq, phba); |
| 1632 | out_free_sysfs_attr: |
| 1633 | lpfc_free_sysfs_attr(phba); |
| 1634 | out_kthread_stop: |
| 1635 | kthread_stop(phba->worker_thread); |
| 1636 | out_free_iocbq: |
| 1637 | list_for_each_entry_safe(iocbq_entry, iocbq_next, |
| 1638 | &phba->lpfc_iocb_list, list) { |
| 1639 | spin_lock_irq(phba->host->host_lock); |
| 1640 | kfree(iocbq_entry); |
| 1641 | phba->total_iocbq_bufs--; |
| 1642 | spin_unlock_irq(phba->host->host_lock); |
| 1643 | } |
| 1644 | lpfc_mem_free(phba); |
| 1645 | out_free_slim: |
| 1646 | dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, phba->slim2p, |
| 1647 | phba->slim2p_mapping); |
| 1648 | out_iounmap: |
| 1649 | iounmap(phba->ctrl_regs_memmap_p); |
| 1650 | iounmap(phba->slim_memmap_p); |
| 1651 | out_idr_remove: |
| 1652 | idr_remove(&lpfc_hba_index, phba->brd_no); |
| 1653 | out_put_host: |
| 1654 | scsi_host_put(host); |
| 1655 | out_release_regions: |
| 1656 | pci_release_regions(pdev); |
| 1657 | out_disable_device: |
| 1658 | pci_disable_device(pdev); |
| 1659 | out: |
| 1660 | return error; |
| 1661 | } |
| 1662 | |
| 1663 | static void __devexit |
| 1664 | lpfc_pci_remove_one(struct pci_dev *pdev) |
| 1665 | { |
| 1666 | struct Scsi_Host *host = pci_get_drvdata(pdev); |
| 1667 | struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata[0]; |
| 1668 | unsigned long iflag; |
| 1669 | |
| 1670 | lpfc_free_sysfs_attr(phba); |
| 1671 | |
| 1672 | spin_lock_irqsave(phba->host->host_lock, iflag); |
| 1673 | phba->fc_flag |= FC_UNLOADING; |
| 1674 | |
| 1675 | spin_unlock_irqrestore(phba->host->host_lock, iflag); |
| 1676 | |
| 1677 | fc_remove_host(phba->host); |
| 1678 | scsi_remove_host(phba->host); |
| 1679 | |
| 1680 | kthread_stop(phba->worker_thread); |
| 1681 | |
| 1682 | /* |
| 1683 | * Bring down the SLI Layer. This step disable all interrupts, |
| 1684 | * clears the rings, discards all mailbox commands, and resets |
| 1685 | * the HBA. |
| 1686 | */ |
| 1687 | lpfc_sli_hba_down(phba); |
| 1688 | |
| 1689 | /* Release the irq reservation */ |
| 1690 | free_irq(phba->pcidev->irq, phba); |
| 1691 | |
| 1692 | lpfc_cleanup(phba, 0); |
| 1693 | lpfc_stop_timer(phba); |
| 1694 | phba->work_hba_events = 0; |
| 1695 | |
| 1696 | /* |
| 1697 | * Call scsi_free before mem_free since scsi bufs are released to their |
| 1698 | * corresponding pools here. |
| 1699 | */ |
| 1700 | lpfc_scsi_free(phba); |
| 1701 | lpfc_mem_free(phba); |
| 1702 | |
| 1703 | /* Free resources associated with SLI2 interface */ |
| 1704 | dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, |
| 1705 | phba->slim2p, phba->slim2p_mapping); |
| 1706 | |
| 1707 | /* unmap adapter SLIM and Control Registers */ |
| 1708 | iounmap(phba->ctrl_regs_memmap_p); |
| 1709 | iounmap(phba->slim_memmap_p); |
| 1710 | |
| 1711 | pci_release_regions(phba->pcidev); |
| 1712 | pci_disable_device(phba->pcidev); |
| 1713 | |
| 1714 | idr_remove(&lpfc_hba_index, phba->brd_no); |
| 1715 | scsi_host_put(phba->host); |
| 1716 | |
| 1717 | pci_set_drvdata(pdev, NULL); |
| 1718 | } |
| 1719 | |
| 1720 | static struct pci_device_id lpfc_id_table[] = { |
| 1721 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER, |
| 1722 | PCI_ANY_ID, PCI_ANY_ID, }, |
James.Smart@Emulex.Com | 06325e7 | 2005-06-25 10:34:22 -0400 | [diff] [blame] | 1723 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FIREFLY, |
| 1724 | PCI_ANY_ID, PCI_ANY_ID, }, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1725 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_THOR, |
| 1726 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1727 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PEGASUS, |
| 1728 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1729 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_CENTAUR, |
| 1730 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1731 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_DRAGONFLY, |
| 1732 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1733 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SUPERFLY, |
| 1734 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1735 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_RFLY, |
| 1736 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1737 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PFLY, |
| 1738 | PCI_ANY_ID, PCI_ANY_ID, }, |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 1739 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE, |
| 1740 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1741 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_SCSP, |
| 1742 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1743 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_DCSP, |
| 1744 | PCI_ANY_ID, PCI_ANY_ID, }, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1745 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS, |
| 1746 | PCI_ANY_ID, PCI_ANY_ID, }, |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 1747 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_SCSP, |
| 1748 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1749 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_DCSP, |
| 1750 | PCI_ANY_ID, PCI_ANY_ID, }, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1751 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BMID, |
| 1752 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1753 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BSMB, |
| 1754 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1755 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR, |
| 1756 | PCI_ANY_ID, PCI_ANY_ID, }, |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 1757 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP, |
| 1758 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1759 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP, |
| 1760 | PCI_ANY_ID, PCI_ANY_ID, }, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1761 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZMID, |
| 1762 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1763 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZSMB, |
| 1764 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1765 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_TFLY, |
| 1766 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1767 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP101, |
| 1768 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1769 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP10000S, |
| 1770 | PCI_ANY_ID, PCI_ANY_ID, }, |
James.Smart@Emulex.Com | e4adb20 | 2005-11-28 11:42:12 -0500 | [diff] [blame] | 1771 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP11000S, |
| 1772 | PCI_ANY_ID, PCI_ANY_ID, }, |
| 1773 | {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LPE11000S, |
| 1774 | PCI_ANY_ID, PCI_ANY_ID, }, |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1775 | { 0 } |
| 1776 | }; |
| 1777 | |
| 1778 | MODULE_DEVICE_TABLE(pci, lpfc_id_table); |
| 1779 | |
| 1780 | static struct pci_driver lpfc_driver = { |
| 1781 | .name = LPFC_DRIVER_NAME, |
| 1782 | .id_table = lpfc_id_table, |
| 1783 | .probe = lpfc_pci_probe_one, |
| 1784 | .remove = __devexit_p(lpfc_pci_remove_one), |
| 1785 | }; |
| 1786 | |
| 1787 | static int __init |
| 1788 | lpfc_init(void) |
| 1789 | { |
| 1790 | int error = 0; |
| 1791 | |
| 1792 | printk(LPFC_MODULE_DESC "\n"); |
James.Smart@Emulex.Com | c44ce17 | 2005-06-25 10:34:39 -0400 | [diff] [blame] | 1793 | printk(LPFC_COPYRIGHT "\n"); |
| dea3101 | 2005-04-17 16:05:31 -0500 | [diff] [blame] | 1794 | |
| 1795 | lpfc_transport_template = |
| 1796 | fc_attach_transport(&lpfc_transport_functions); |
| 1797 | if (!lpfc_transport_template) |
| 1798 | return -ENOMEM; |
| 1799 | error = pci_register_driver(&lpfc_driver); |
| 1800 | if (error) |
| 1801 | fc_release_transport(lpfc_transport_template); |
| 1802 | |
| 1803 | return error; |
| 1804 | } |
| 1805 | |
| 1806 | static void __exit |
| 1807 | lpfc_exit(void) |
| 1808 | { |
| 1809 | pci_unregister_driver(&lpfc_driver); |
| 1810 | fc_release_transport(lpfc_transport_template); |
| 1811 | } |
| 1812 | |
| 1813 | module_init(lpfc_init); |
| 1814 | module_exit(lpfc_exit); |
| 1815 | MODULE_LICENSE("GPL"); |
| 1816 | MODULE_DESCRIPTION(LPFC_MODULE_DESC); |
| 1817 | MODULE_AUTHOR("Emulex Corporation - tech.support@emulex.com"); |
| 1818 | MODULE_VERSION("0:" LPFC_DRIVER_VERSION); |