Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1 | /*************************************************************************** |
| 2 | * |
| 3 | * Copyright (C) 2004-2008 SMSC |
| 4 | * Copyright (C) 2005-2008 ARM |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License |
| 8 | * as published by the Free Software Foundation; either version 2 |
| 9 | * of the License, or (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program; if not, write to the Free Software |
| 18 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| 19 | * |
| 20 | *************************************************************************** |
| 21 | * Rewritten, heavily based on smsc911x simple driver by SMSC. |
| 22 | * Partly uses io macros from smc91x.c by Nicolas Pitre |
| 23 | * |
| 24 | * Supported devices: |
| 25 | * LAN9115, LAN9116, LAN9117, LAN9118 |
| 26 | * LAN9215, LAN9216, LAN9217, LAN9218 |
| 27 | * LAN9210, LAN9211 |
| 28 | * LAN9220, LAN9221 |
| 29 | * |
| 30 | */ |
| 31 | |
| 32 | #include <linux/crc32.h> |
| 33 | #include <linux/delay.h> |
| 34 | #include <linux/errno.h> |
| 35 | #include <linux/etherdevice.h> |
| 36 | #include <linux/ethtool.h> |
| 37 | #include <linux/init.h> |
| 38 | #include <linux/ioport.h> |
| 39 | #include <linux/kernel.h> |
| 40 | #include <linux/module.h> |
| 41 | #include <linux/netdevice.h> |
| 42 | #include <linux/platform_device.h> |
| 43 | #include <linux/sched.h> |
| 44 | #include <linux/slab.h> |
| 45 | #include <linux/timer.h> |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 46 | #include <linux/bug.h> |
| 47 | #include <linux/bitops.h> |
| 48 | #include <linux/irq.h> |
| 49 | #include <linux/io.h> |
Magnus Damm | 833cc67 | 2009-04-27 21:32:16 +0000 | [diff] [blame] | 50 | #include <linux/swab.h> |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 51 | #include <linux/phy.h> |
| 52 | #include <linux/smsc911x.h> |
Daniel Mack | 6cb8782 | 2009-08-05 08:29:31 +0000 | [diff] [blame] | 53 | #include <linux/device.h> |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 54 | #include "smsc911x.h" |
| 55 | |
| 56 | #define SMSC_CHIPNAME "smsc911x" |
| 57 | #define SMSC_MDIONAME "smsc911x-mdio" |
| 58 | #define SMSC_DRV_VERSION "2008-10-21" |
| 59 | |
| 60 | MODULE_LICENSE("GPL"); |
| 61 | MODULE_VERSION(SMSC_DRV_VERSION); |
| 62 | |
| 63 | #if USE_DEBUG > 0 |
| 64 | static int debug = 16; |
| 65 | #else |
| 66 | static int debug = 3; |
| 67 | #endif |
| 68 | |
| 69 | module_param(debug, int, 0); |
| 70 | MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); |
| 71 | |
| 72 | struct smsc911x_data { |
| 73 | void __iomem *ioaddr; |
| 74 | |
| 75 | unsigned int idrev; |
| 76 | |
| 77 | /* used to decide which workarounds apply */ |
| 78 | unsigned int generation; |
| 79 | |
| 80 | /* device configuration (copied from platform_data during probe) */ |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 81 | struct smsc911x_platform_config config; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 82 | |
| 83 | /* This needs to be acquired before calling any of below: |
| 84 | * smsc911x_mac_read(), smsc911x_mac_write() |
| 85 | */ |
| 86 | spinlock_t mac_lock; |
| 87 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 88 | /* spinlock to ensure 16-bit accesses are serialised. |
| 89 | * unused with a 32-bit bus */ |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 90 | spinlock_t dev_lock; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 91 | |
| 92 | struct phy_device *phy_dev; |
| 93 | struct mii_bus *mii_bus; |
| 94 | int phy_irq[PHY_MAX_ADDR]; |
| 95 | unsigned int using_extphy; |
| 96 | int last_duplex; |
| 97 | int last_carrier; |
| 98 | |
| 99 | u32 msg_enable; |
| 100 | unsigned int gpio_setting; |
| 101 | unsigned int gpio_orig_setting; |
| 102 | struct net_device *dev; |
| 103 | struct napi_struct napi; |
| 104 | |
| 105 | unsigned int software_irq_signal; |
| 106 | |
| 107 | #ifdef USE_PHY_WORK_AROUND |
| 108 | #define MIN_PACKET_SIZE (64) |
| 109 | char loopback_tx_pkt[MIN_PACKET_SIZE]; |
| 110 | char loopback_rx_pkt[MIN_PACKET_SIZE]; |
| 111 | unsigned int resetcount; |
| 112 | #endif |
| 113 | |
| 114 | /* Members for Multicast filter workaround */ |
| 115 | unsigned int multicast_update_pending; |
| 116 | unsigned int set_bits_mask; |
| 117 | unsigned int clear_bits_mask; |
| 118 | unsigned int hashhi; |
| 119 | unsigned int hashlo; |
| 120 | }; |
| 121 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 122 | /* The 16-bit access functions are significantly slower, due to the locking |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 123 | * necessary. If your bus hardware can be configured to do this for you |
| 124 | * (in response to a single 32-bit operation from software), you should use |
| 125 | * the 32-bit access functions instead. */ |
| 126 | |
| 127 | static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg) |
| 128 | { |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 129 | if (pdata->config.flags & SMSC911X_USE_32BIT) |
| 130 | return readl(pdata->ioaddr + reg); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 131 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 132 | if (pdata->config.flags & SMSC911X_USE_16BIT) { |
| 133 | u32 data; |
| 134 | unsigned long flags; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 135 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 136 | /* these two 16-bit reads must be performed consecutively, so |
| 137 | * must not be interrupted by our own ISR (which would start |
| 138 | * another read operation) */ |
| 139 | spin_lock_irqsave(&pdata->dev_lock, flags); |
| 140 | data = ((readw(pdata->ioaddr + reg) & 0xFFFF) | |
| 141 | ((readw(pdata->ioaddr + reg + 2) & 0xFFFF) << 16)); |
| 142 | spin_unlock_irqrestore(&pdata->dev_lock, flags); |
| 143 | |
| 144 | return data; |
| 145 | } |
| 146 | |
| 147 | BUG(); |
Steve Glendinning | 702403a | 2009-01-11 00:14:27 -0800 | [diff] [blame] | 148 | return 0; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 149 | } |
| 150 | |
| 151 | static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg, |
| 152 | u32 val) |
| 153 | { |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 154 | if (pdata->config.flags & SMSC911X_USE_32BIT) { |
| 155 | writel(val, pdata->ioaddr + reg); |
| 156 | return; |
| 157 | } |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 158 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 159 | if (pdata->config.flags & SMSC911X_USE_16BIT) { |
| 160 | unsigned long flags; |
| 161 | |
| 162 | /* these two 16-bit writes must be performed consecutively, so |
| 163 | * must not be interrupted by our own ISR (which would start |
| 164 | * another read operation) */ |
| 165 | spin_lock_irqsave(&pdata->dev_lock, flags); |
| 166 | writew(val & 0xFFFF, pdata->ioaddr + reg); |
| 167 | writew((val >> 16) & 0xFFFF, pdata->ioaddr + reg + 2); |
| 168 | spin_unlock_irqrestore(&pdata->dev_lock, flags); |
| 169 | return; |
| 170 | } |
| 171 | |
| 172 | BUG(); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 173 | } |
| 174 | |
| 175 | /* Writes a packet to the TX_DATA_FIFO */ |
| 176 | static inline void |
| 177 | smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf, |
| 178 | unsigned int wordcount) |
| 179 | { |
Magnus Damm | 833cc67 | 2009-04-27 21:32:16 +0000 | [diff] [blame] | 180 | if (pdata->config.flags & SMSC911X_SWAP_FIFO) { |
| 181 | while (wordcount--) |
| 182 | smsc911x_reg_write(pdata, TX_DATA_FIFO, swab32(*buf++)); |
| 183 | return; |
| 184 | } |
| 185 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 186 | if (pdata->config.flags & SMSC911X_USE_32BIT) { |
| 187 | writesl(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount); |
| 188 | return; |
| 189 | } |
| 190 | |
| 191 | if (pdata->config.flags & SMSC911X_USE_16BIT) { |
| 192 | while (wordcount--) |
| 193 | smsc911x_reg_write(pdata, TX_DATA_FIFO, *buf++); |
| 194 | return; |
| 195 | } |
| 196 | |
| 197 | BUG(); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 198 | } |
| 199 | |
| 200 | /* Reads a packet out of the RX_DATA_FIFO */ |
| 201 | static inline void |
| 202 | smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf, |
| 203 | unsigned int wordcount) |
| 204 | { |
Magnus Damm | 833cc67 | 2009-04-27 21:32:16 +0000 | [diff] [blame] | 205 | if (pdata->config.flags & SMSC911X_SWAP_FIFO) { |
| 206 | while (wordcount--) |
| 207 | *buf++ = swab32(smsc911x_reg_read(pdata, RX_DATA_FIFO)); |
| 208 | return; |
| 209 | } |
| 210 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 211 | if (pdata->config.flags & SMSC911X_USE_32BIT) { |
| 212 | readsl(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount); |
| 213 | return; |
| 214 | } |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 215 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 216 | if (pdata->config.flags & SMSC911X_USE_16BIT) { |
| 217 | while (wordcount--) |
| 218 | *buf++ = smsc911x_reg_read(pdata, RX_DATA_FIFO); |
| 219 | return; |
| 220 | } |
| 221 | |
| 222 | BUG(); |
| 223 | } |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 224 | |
| 225 | /* waits for MAC not busy, with timeout. Only called by smsc911x_mac_read |
| 226 | * and smsc911x_mac_write, so assumes mac_lock is held */ |
| 227 | static int smsc911x_mac_complete(struct smsc911x_data *pdata) |
| 228 | { |
| 229 | int i; |
| 230 | u32 val; |
| 231 | |
| 232 | SMSC_ASSERT_MAC_LOCK(pdata); |
| 233 | |
| 234 | for (i = 0; i < 40; i++) { |
| 235 | val = smsc911x_reg_read(pdata, MAC_CSR_CMD); |
| 236 | if (!(val & MAC_CSR_CMD_CSR_BUSY_)) |
| 237 | return 0; |
| 238 | } |
| 239 | SMSC_WARNING(HW, "Timed out waiting for MAC not BUSY. " |
| 240 | "MAC_CSR_CMD: 0x%08X", val); |
| 241 | return -EIO; |
| 242 | } |
| 243 | |
| 244 | /* Fetches a MAC register value. Assumes mac_lock is acquired */ |
| 245 | static u32 smsc911x_mac_read(struct smsc911x_data *pdata, unsigned int offset) |
| 246 | { |
| 247 | unsigned int temp; |
| 248 | |
| 249 | SMSC_ASSERT_MAC_LOCK(pdata); |
| 250 | |
| 251 | temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); |
| 252 | if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { |
| 253 | SMSC_WARNING(HW, "MAC busy at entry"); |
| 254 | return 0xFFFFFFFF; |
| 255 | } |
| 256 | |
| 257 | /* Send the MAC cmd */ |
| 258 | smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | |
| 259 | MAC_CSR_CMD_CSR_BUSY_ | MAC_CSR_CMD_R_NOT_W_)); |
| 260 | |
| 261 | /* Workaround for hardware read-after-write restriction */ |
| 262 | temp = smsc911x_reg_read(pdata, BYTE_TEST); |
| 263 | |
| 264 | /* Wait for the read to complete */ |
| 265 | if (likely(smsc911x_mac_complete(pdata) == 0)) |
| 266 | return smsc911x_reg_read(pdata, MAC_CSR_DATA); |
| 267 | |
| 268 | SMSC_WARNING(HW, "MAC busy after read"); |
| 269 | return 0xFFFFFFFF; |
| 270 | } |
| 271 | |
| 272 | /* Set a mac register, mac_lock must be acquired before calling */ |
| 273 | static void smsc911x_mac_write(struct smsc911x_data *pdata, |
| 274 | unsigned int offset, u32 val) |
| 275 | { |
| 276 | unsigned int temp; |
| 277 | |
| 278 | SMSC_ASSERT_MAC_LOCK(pdata); |
| 279 | |
| 280 | temp = smsc911x_reg_read(pdata, MAC_CSR_CMD); |
| 281 | if (unlikely(temp & MAC_CSR_CMD_CSR_BUSY_)) { |
| 282 | SMSC_WARNING(HW, |
| 283 | "smsc911x_mac_write failed, MAC busy at entry"); |
| 284 | return; |
| 285 | } |
| 286 | |
| 287 | /* Send data to write */ |
| 288 | smsc911x_reg_write(pdata, MAC_CSR_DATA, val); |
| 289 | |
| 290 | /* Write the actual data */ |
| 291 | smsc911x_reg_write(pdata, MAC_CSR_CMD, ((offset & 0xFF) | |
| 292 | MAC_CSR_CMD_CSR_BUSY_)); |
| 293 | |
| 294 | /* Workaround for hardware read-after-write restriction */ |
| 295 | temp = smsc911x_reg_read(pdata, BYTE_TEST); |
| 296 | |
| 297 | /* Wait for the write to complete */ |
| 298 | if (likely(smsc911x_mac_complete(pdata) == 0)) |
| 299 | return; |
| 300 | |
| 301 | SMSC_WARNING(HW, |
| 302 | "smsc911x_mac_write failed, MAC busy after write"); |
| 303 | } |
| 304 | |
| 305 | /* Get a phy register */ |
| 306 | static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx) |
| 307 | { |
| 308 | struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; |
| 309 | unsigned long flags; |
| 310 | unsigned int addr; |
| 311 | int i, reg; |
| 312 | |
| 313 | spin_lock_irqsave(&pdata->mac_lock, flags); |
| 314 | |
| 315 | /* Confirm MII not busy */ |
| 316 | if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { |
| 317 | SMSC_WARNING(HW, |
| 318 | "MII is busy in smsc911x_mii_read???"); |
| 319 | reg = -EIO; |
| 320 | goto out; |
| 321 | } |
| 322 | |
| 323 | /* Set the address, index & direction (read from PHY) */ |
| 324 | addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6); |
| 325 | smsc911x_mac_write(pdata, MII_ACC, addr); |
| 326 | |
| 327 | /* Wait for read to complete w/ timeout */ |
| 328 | for (i = 0; i < 100; i++) |
| 329 | if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { |
| 330 | reg = smsc911x_mac_read(pdata, MII_DATA); |
| 331 | goto out; |
| 332 | } |
| 333 | |
Steve Glendinning | 150899d | 2009-04-08 15:42:15 -0700 | [diff] [blame] | 334 | SMSC_WARNING(HW, "Timed out waiting for MII read to finish"); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 335 | reg = -EIO; |
| 336 | |
| 337 | out: |
| 338 | spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| 339 | return reg; |
| 340 | } |
| 341 | |
| 342 | /* Set a phy register */ |
| 343 | static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx, |
| 344 | u16 val) |
| 345 | { |
| 346 | struct smsc911x_data *pdata = (struct smsc911x_data *)bus->priv; |
| 347 | unsigned long flags; |
| 348 | unsigned int addr; |
| 349 | int i, reg; |
| 350 | |
| 351 | spin_lock_irqsave(&pdata->mac_lock, flags); |
| 352 | |
| 353 | /* Confirm MII not busy */ |
| 354 | if (unlikely(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { |
| 355 | SMSC_WARNING(HW, |
| 356 | "MII is busy in smsc911x_mii_write???"); |
| 357 | reg = -EIO; |
| 358 | goto out; |
| 359 | } |
| 360 | |
| 361 | /* Put the data to write in the MAC */ |
| 362 | smsc911x_mac_write(pdata, MII_DATA, val); |
| 363 | |
| 364 | /* Set the address, index & direction (write to PHY) */ |
| 365 | addr = ((phyaddr & 0x1F) << 11) | ((regidx & 0x1F) << 6) | |
| 366 | MII_ACC_MII_WRITE_; |
| 367 | smsc911x_mac_write(pdata, MII_ACC, addr); |
| 368 | |
| 369 | /* Wait for write to complete w/ timeout */ |
| 370 | for (i = 0; i < 100; i++) |
| 371 | if (!(smsc911x_mac_read(pdata, MII_ACC) & MII_ACC_MII_BUSY_)) { |
| 372 | reg = 0; |
| 373 | goto out; |
| 374 | } |
| 375 | |
| 376 | SMSC_WARNING(HW, "Timed out waiting for MII write to finish"); |
| 377 | reg = -EIO; |
| 378 | |
| 379 | out: |
| 380 | spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| 381 | return reg; |
| 382 | } |
| 383 | |
Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 384 | /* Switch to external phy. Assumes tx and rx are stopped. */ |
| 385 | static void smsc911x_phy_enable_external(struct smsc911x_data *pdata) |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 386 | { |
| 387 | unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); |
| 388 | |
Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 389 | /* Disable phy clocks to the MAC */ |
| 390 | hwcfg &= (~HW_CFG_PHY_CLK_SEL_); |
| 391 | hwcfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; |
| 392 | smsc911x_reg_write(pdata, HW_CFG, hwcfg); |
| 393 | udelay(10); /* Enough time for clocks to stop */ |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 394 | |
Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 395 | /* Switch to external phy */ |
| 396 | hwcfg |= HW_CFG_EXT_PHY_EN_; |
| 397 | smsc911x_reg_write(pdata, HW_CFG, hwcfg); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 398 | |
Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 399 | /* Enable phy clocks to the MAC */ |
| 400 | hwcfg &= (~HW_CFG_PHY_CLK_SEL_); |
| 401 | hwcfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; |
| 402 | smsc911x_reg_write(pdata, HW_CFG, hwcfg); |
| 403 | udelay(10); /* Enough time for clocks to restart */ |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 404 | |
Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 405 | hwcfg |= HW_CFG_SMI_SEL_; |
| 406 | smsc911x_reg_write(pdata, HW_CFG, hwcfg); |
| 407 | } |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 408 | |
Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 409 | /* Autodetects and enables external phy if present on supported chips. |
| 410 | * autodetection can be overridden by specifying SMSC911X_FORCE_INTERNAL_PHY |
| 411 | * or SMSC911X_FORCE_EXTERNAL_PHY in the platform_data flags. */ |
| 412 | static void smsc911x_phy_initialise_external(struct smsc911x_data *pdata) |
| 413 | { |
| 414 | unsigned int hwcfg = smsc911x_reg_read(pdata, HW_CFG); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 415 | |
Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 416 | if (pdata->config.flags & SMSC911X_FORCE_INTERNAL_PHY) { |
| 417 | SMSC_TRACE(HW, "Forcing internal PHY"); |
| 418 | pdata->using_extphy = 0; |
| 419 | } else if (pdata->config.flags & SMSC911X_FORCE_EXTERNAL_PHY) { |
| 420 | SMSC_TRACE(HW, "Forcing external PHY"); |
| 421 | smsc911x_phy_enable_external(pdata); |
| 422 | pdata->using_extphy = 1; |
| 423 | } else if (hwcfg & HW_CFG_EXT_PHY_DET_) { |
| 424 | SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET set, using external PHY"); |
| 425 | smsc911x_phy_enable_external(pdata); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 426 | pdata->using_extphy = 1; |
| 427 | } else { |
Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 428 | SMSC_TRACE(HW, "HW_CFG EXT_PHY_DET clear, using internal PHY"); |
| 429 | pdata->using_extphy = 0; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 430 | } |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 431 | } |
| 432 | |
| 433 | /* Fetches a tx status out of the status fifo */ |
| 434 | static unsigned int smsc911x_tx_get_txstatus(struct smsc911x_data *pdata) |
| 435 | { |
| 436 | unsigned int result = |
| 437 | smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TSUSED_; |
| 438 | |
| 439 | if (result != 0) |
| 440 | result = smsc911x_reg_read(pdata, TX_STATUS_FIFO); |
| 441 | |
| 442 | return result; |
| 443 | } |
| 444 | |
| 445 | /* Fetches the next rx status */ |
| 446 | static unsigned int smsc911x_rx_get_rxstatus(struct smsc911x_data *pdata) |
| 447 | { |
| 448 | unsigned int result = |
| 449 | smsc911x_reg_read(pdata, RX_FIFO_INF) & RX_FIFO_INF_RXSUSED_; |
| 450 | |
| 451 | if (result != 0) |
| 452 | result = smsc911x_reg_read(pdata, RX_STATUS_FIFO); |
| 453 | |
| 454 | return result; |
| 455 | } |
| 456 | |
| 457 | #ifdef USE_PHY_WORK_AROUND |
| 458 | static int smsc911x_phy_check_loopbackpkt(struct smsc911x_data *pdata) |
| 459 | { |
| 460 | unsigned int tries; |
| 461 | u32 wrsz; |
| 462 | u32 rdsz; |
| 463 | ulong bufp; |
| 464 | |
| 465 | for (tries = 0; tries < 10; tries++) { |
| 466 | unsigned int txcmd_a; |
| 467 | unsigned int txcmd_b; |
| 468 | unsigned int status; |
| 469 | unsigned int pktlength; |
| 470 | unsigned int i; |
| 471 | |
| 472 | /* Zero-out rx packet memory */ |
| 473 | memset(pdata->loopback_rx_pkt, 0, MIN_PACKET_SIZE); |
| 474 | |
| 475 | /* Write tx packet to 118 */ |
| 476 | txcmd_a = (u32)((ulong)pdata->loopback_tx_pkt & 0x03) << 16; |
| 477 | txcmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; |
| 478 | txcmd_a |= MIN_PACKET_SIZE; |
| 479 | |
| 480 | txcmd_b = MIN_PACKET_SIZE << 16 | MIN_PACKET_SIZE; |
| 481 | |
| 482 | smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_a); |
| 483 | smsc911x_reg_write(pdata, TX_DATA_FIFO, txcmd_b); |
| 484 | |
| 485 | bufp = (ulong)pdata->loopback_tx_pkt & (~0x3); |
| 486 | wrsz = MIN_PACKET_SIZE + 3; |
| 487 | wrsz += (u32)((ulong)pdata->loopback_tx_pkt & 0x3); |
| 488 | wrsz >>= 2; |
| 489 | |
| 490 | smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz); |
| 491 | |
| 492 | /* Wait till transmit is done */ |
| 493 | i = 60; |
| 494 | do { |
| 495 | udelay(5); |
| 496 | status = smsc911x_tx_get_txstatus(pdata); |
| 497 | } while ((i--) && (!status)); |
| 498 | |
| 499 | if (!status) { |
| 500 | SMSC_WARNING(HW, "Failed to transmit " |
| 501 | "during loopback test"); |
| 502 | continue; |
| 503 | } |
| 504 | if (status & TX_STS_ES_) { |
| 505 | SMSC_WARNING(HW, "Transmit encountered " |
| 506 | "errors during loopback test"); |
| 507 | continue; |
| 508 | } |
| 509 | |
| 510 | /* Wait till receive is done */ |
| 511 | i = 60; |
| 512 | do { |
| 513 | udelay(5); |
| 514 | status = smsc911x_rx_get_rxstatus(pdata); |
| 515 | } while ((i--) && (!status)); |
| 516 | |
| 517 | if (!status) { |
| 518 | SMSC_WARNING(HW, |
| 519 | "Failed to receive during loopback test"); |
| 520 | continue; |
| 521 | } |
| 522 | if (status & RX_STS_ES_) { |
| 523 | SMSC_WARNING(HW, "Receive encountered " |
| 524 | "errors during loopback test"); |
| 525 | continue; |
| 526 | } |
| 527 | |
| 528 | pktlength = ((status & 0x3FFF0000UL) >> 16); |
| 529 | bufp = (ulong)pdata->loopback_rx_pkt; |
| 530 | rdsz = pktlength + 3; |
| 531 | rdsz += (u32)((ulong)pdata->loopback_rx_pkt & 0x3); |
| 532 | rdsz >>= 2; |
| 533 | |
| 534 | smsc911x_rx_readfifo(pdata, (unsigned int *)bufp, rdsz); |
| 535 | |
| 536 | if (pktlength != (MIN_PACKET_SIZE + 4)) { |
| 537 | SMSC_WARNING(HW, "Unexpected packet size " |
| 538 | "during loop back test, size=%d, will retry", |
| 539 | pktlength); |
| 540 | } else { |
| 541 | unsigned int j; |
| 542 | int mismatch = 0; |
| 543 | for (j = 0; j < MIN_PACKET_SIZE; j++) { |
| 544 | if (pdata->loopback_tx_pkt[j] |
| 545 | != pdata->loopback_rx_pkt[j]) { |
| 546 | mismatch = 1; |
| 547 | break; |
| 548 | } |
| 549 | } |
| 550 | if (!mismatch) { |
| 551 | SMSC_TRACE(HW, "Successfully verified " |
| 552 | "loopback packet"); |
| 553 | return 0; |
| 554 | } else { |
| 555 | SMSC_WARNING(HW, "Data mismatch " |
| 556 | "during loop back test, will retry"); |
| 557 | } |
| 558 | } |
| 559 | } |
| 560 | |
| 561 | return -EIO; |
| 562 | } |
| 563 | |
| 564 | static int smsc911x_phy_reset(struct smsc911x_data *pdata) |
| 565 | { |
| 566 | struct phy_device *phy_dev = pdata->phy_dev; |
| 567 | unsigned int temp; |
| 568 | unsigned int i = 100000; |
| 569 | |
| 570 | BUG_ON(!phy_dev); |
| 571 | BUG_ON(!phy_dev->bus); |
| 572 | |
| 573 | SMSC_TRACE(HW, "Performing PHY BCR Reset"); |
| 574 | smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, BMCR_RESET); |
| 575 | do { |
| 576 | msleep(1); |
| 577 | temp = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, |
| 578 | MII_BMCR); |
| 579 | } while ((i--) && (temp & BMCR_RESET)); |
| 580 | |
| 581 | if (temp & BMCR_RESET) { |
| 582 | SMSC_WARNING(HW, "PHY reset failed to complete."); |
| 583 | return -EIO; |
| 584 | } |
| 585 | /* Extra delay required because the phy may not be completed with |
| 586 | * its reset when BMCR_RESET is cleared. Specs say 256 uS is |
| 587 | * enough delay but using 1ms here to be safe */ |
| 588 | msleep(1); |
| 589 | |
| 590 | return 0; |
| 591 | } |
| 592 | |
| 593 | static int smsc911x_phy_loopbacktest(struct net_device *dev) |
| 594 | { |
| 595 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 596 | struct phy_device *phy_dev = pdata->phy_dev; |
| 597 | int result = -EIO; |
| 598 | unsigned int i, val; |
| 599 | unsigned long flags; |
| 600 | |
| 601 | /* Initialise tx packet using broadcast destination address */ |
| 602 | memset(pdata->loopback_tx_pkt, 0xff, ETH_ALEN); |
| 603 | |
| 604 | /* Use incrementing source address */ |
| 605 | for (i = 6; i < 12; i++) |
| 606 | pdata->loopback_tx_pkt[i] = (char)i; |
| 607 | |
| 608 | /* Set length type field */ |
| 609 | pdata->loopback_tx_pkt[12] = 0x00; |
| 610 | pdata->loopback_tx_pkt[13] = 0x00; |
| 611 | |
| 612 | for (i = 14; i < MIN_PACKET_SIZE; i++) |
| 613 | pdata->loopback_tx_pkt[i] = (char)i; |
| 614 | |
| 615 | val = smsc911x_reg_read(pdata, HW_CFG); |
| 616 | val &= HW_CFG_TX_FIF_SZ_; |
| 617 | val |= HW_CFG_SF_; |
| 618 | smsc911x_reg_write(pdata, HW_CFG, val); |
| 619 | |
| 620 | smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); |
| 621 | smsc911x_reg_write(pdata, RX_CFG, |
| 622 | (u32)((ulong)pdata->loopback_rx_pkt & 0x03) << 8); |
| 623 | |
| 624 | for (i = 0; i < 10; i++) { |
| 625 | /* Set PHY to 10/FD, no ANEG, and loopback mode */ |
| 626 | smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, |
| 627 | BMCR_LOOPBACK | BMCR_FULLDPLX); |
| 628 | |
| 629 | /* Enable MAC tx/rx, FD */ |
| 630 | spin_lock_irqsave(&pdata->mac_lock, flags); |
| 631 | smsc911x_mac_write(pdata, MAC_CR, MAC_CR_FDPX_ |
| 632 | | MAC_CR_TXEN_ | MAC_CR_RXEN_); |
| 633 | spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| 634 | |
| 635 | if (smsc911x_phy_check_loopbackpkt(pdata) == 0) { |
| 636 | result = 0; |
| 637 | break; |
| 638 | } |
| 639 | pdata->resetcount++; |
| 640 | |
| 641 | /* Disable MAC rx */ |
| 642 | spin_lock_irqsave(&pdata->mac_lock, flags); |
| 643 | smsc911x_mac_write(pdata, MAC_CR, 0); |
| 644 | spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| 645 | |
| 646 | smsc911x_phy_reset(pdata); |
| 647 | } |
| 648 | |
| 649 | /* Disable MAC */ |
| 650 | spin_lock_irqsave(&pdata->mac_lock, flags); |
| 651 | smsc911x_mac_write(pdata, MAC_CR, 0); |
| 652 | spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| 653 | |
| 654 | /* Cancel PHY loopback mode */ |
| 655 | smsc911x_mii_write(phy_dev->bus, phy_dev->addr, MII_BMCR, 0); |
| 656 | |
| 657 | smsc911x_reg_write(pdata, TX_CFG, 0); |
| 658 | smsc911x_reg_write(pdata, RX_CFG, 0); |
| 659 | |
| 660 | return result; |
| 661 | } |
| 662 | #endif /* USE_PHY_WORK_AROUND */ |
| 663 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 664 | static void smsc911x_phy_update_flowcontrol(struct smsc911x_data *pdata) |
| 665 | { |
| 666 | struct phy_device *phy_dev = pdata->phy_dev; |
| 667 | u32 afc = smsc911x_reg_read(pdata, AFC_CFG); |
| 668 | u32 flow; |
| 669 | unsigned long flags; |
| 670 | |
| 671 | if (phy_dev->duplex == DUPLEX_FULL) { |
| 672 | u16 lcladv = phy_read(phy_dev, MII_ADVERTISE); |
| 673 | u16 rmtadv = phy_read(phy_dev, MII_LPA); |
Steve Glendinning | bc02ff9 | 2008-12-16 02:00:48 -0800 | [diff] [blame] | 674 | u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 675 | |
| 676 | if (cap & FLOW_CTRL_RX) |
| 677 | flow = 0xFFFF0002; |
| 678 | else |
| 679 | flow = 0; |
| 680 | |
| 681 | if (cap & FLOW_CTRL_TX) |
| 682 | afc |= 0xF; |
| 683 | else |
| 684 | afc &= ~0xF; |
| 685 | |
| 686 | SMSC_TRACE(HW, "rx pause %s, tx pause %s", |
| 687 | (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), |
| 688 | (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); |
| 689 | } else { |
| 690 | SMSC_TRACE(HW, "half duplex"); |
| 691 | flow = 0; |
| 692 | afc |= 0xF; |
| 693 | } |
| 694 | |
| 695 | spin_lock_irqsave(&pdata->mac_lock, flags); |
| 696 | smsc911x_mac_write(pdata, FLOW, flow); |
| 697 | spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| 698 | |
| 699 | smsc911x_reg_write(pdata, AFC_CFG, afc); |
| 700 | } |
| 701 | |
| 702 | /* Update link mode if anything has changed. Called periodically when the |
| 703 | * PHY is in polling mode, even if nothing has changed. */ |
| 704 | static void smsc911x_phy_adjust_link(struct net_device *dev) |
| 705 | { |
| 706 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 707 | struct phy_device *phy_dev = pdata->phy_dev; |
| 708 | unsigned long flags; |
| 709 | int carrier; |
| 710 | |
| 711 | if (phy_dev->duplex != pdata->last_duplex) { |
| 712 | unsigned int mac_cr; |
| 713 | SMSC_TRACE(HW, "duplex state has changed"); |
| 714 | |
| 715 | spin_lock_irqsave(&pdata->mac_lock, flags); |
| 716 | mac_cr = smsc911x_mac_read(pdata, MAC_CR); |
| 717 | if (phy_dev->duplex) { |
| 718 | SMSC_TRACE(HW, |
| 719 | "configuring for full duplex mode"); |
| 720 | mac_cr |= MAC_CR_FDPX_; |
| 721 | } else { |
| 722 | SMSC_TRACE(HW, |
| 723 | "configuring for half duplex mode"); |
| 724 | mac_cr &= ~MAC_CR_FDPX_; |
| 725 | } |
| 726 | smsc911x_mac_write(pdata, MAC_CR, mac_cr); |
| 727 | spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| 728 | |
| 729 | smsc911x_phy_update_flowcontrol(pdata); |
| 730 | pdata->last_duplex = phy_dev->duplex; |
| 731 | } |
| 732 | |
| 733 | carrier = netif_carrier_ok(dev); |
| 734 | if (carrier != pdata->last_carrier) { |
| 735 | SMSC_TRACE(HW, "carrier state has changed"); |
| 736 | if (carrier) { |
| 737 | SMSC_TRACE(HW, "configuring for carrier OK"); |
| 738 | if ((pdata->gpio_orig_setting & GPIO_CFG_LED1_EN_) && |
| 739 | (!pdata->using_extphy)) { |
Thomas Weber | 8839316 | 2010-03-16 11:47:56 +0100 | [diff] [blame^] | 740 | /* Restore original GPIO configuration */ |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 741 | pdata->gpio_setting = pdata->gpio_orig_setting; |
| 742 | smsc911x_reg_write(pdata, GPIO_CFG, |
| 743 | pdata->gpio_setting); |
| 744 | } |
| 745 | } else { |
| 746 | SMSC_TRACE(HW, "configuring for no carrier"); |
| 747 | /* Check global setting that LED1 |
| 748 | * usage is 10/100 indicator */ |
| 749 | pdata->gpio_setting = smsc911x_reg_read(pdata, |
| 750 | GPIO_CFG); |
Joe Perches | 8e95a20 | 2009-12-03 07:58:21 +0000 | [diff] [blame] | 751 | if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) && |
| 752 | (!pdata->using_extphy)) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 753 | /* Force 10/100 LED off, after saving |
Thomas Weber | 8839316 | 2010-03-16 11:47:56 +0100 | [diff] [blame^] | 754 | * original GPIO configuration */ |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 755 | pdata->gpio_orig_setting = pdata->gpio_setting; |
| 756 | |
| 757 | pdata->gpio_setting &= ~GPIO_CFG_LED1_EN_; |
| 758 | pdata->gpio_setting |= (GPIO_CFG_GPIOBUF0_ |
| 759 | | GPIO_CFG_GPIODIR0_ |
| 760 | | GPIO_CFG_GPIOD0_); |
| 761 | smsc911x_reg_write(pdata, GPIO_CFG, |
| 762 | pdata->gpio_setting); |
| 763 | } |
| 764 | } |
| 765 | pdata->last_carrier = carrier; |
| 766 | } |
| 767 | } |
| 768 | |
| 769 | static int smsc911x_mii_probe(struct net_device *dev) |
| 770 | { |
| 771 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 772 | struct phy_device *phydev = NULL; |
kirjanov@gmail.com | e4a474f | 2010-02-16 21:54:58 +0000 | [diff] [blame] | 773 | int ret; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 774 | |
| 775 | /* find the first phy */ |
kirjanov@gmail.com | e4a474f | 2010-02-16 21:54:58 +0000 | [diff] [blame] | 776 | phydev = phy_find_first(pdata->mii_bus); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 777 | if (!phydev) { |
| 778 | pr_err("%s: no PHY found\n", dev->name); |
| 779 | return -ENODEV; |
| 780 | } |
| 781 | |
kirjanov@gmail.com | e4a474f | 2010-02-16 21:54:58 +0000 | [diff] [blame] | 782 | SMSC_TRACE(PROBE, "PHY %d: addr %d, phy_id 0x%08X", |
| 783 | phy_addr, phydev->addr, phydev->phy_id); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 784 | |
kirjanov@gmail.com | e4a474f | 2010-02-16 21:54:58 +0000 | [diff] [blame] | 785 | ret = phy_connect_direct(dev, phydev, |
| 786 | &smsc911x_phy_adjust_link, 0, |
| 787 | pdata->config.phy_interface); |
| 788 | |
| 789 | if (ret) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 790 | pr_err("%s: Could not attach to PHY\n", dev->name); |
kirjanov@gmail.com | e4a474f | 2010-02-16 21:54:58 +0000 | [diff] [blame] | 791 | return ret; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 792 | } |
| 793 | |
| 794 | pr_info("%s: attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n", |
Kay Sievers | db1d7bf | 2009-01-26 21:12:58 -0800 | [diff] [blame] | 795 | dev->name, phydev->drv->name, |
| 796 | dev_name(&phydev->dev), phydev->irq); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 797 | |
| 798 | /* mask with MAC supported features */ |
| 799 | phydev->supported &= (PHY_BASIC_FEATURES | SUPPORTED_Pause | |
| 800 | SUPPORTED_Asym_Pause); |
| 801 | phydev->advertising = phydev->supported; |
| 802 | |
| 803 | pdata->phy_dev = phydev; |
| 804 | pdata->last_duplex = -1; |
| 805 | pdata->last_carrier = -1; |
| 806 | |
| 807 | #ifdef USE_PHY_WORK_AROUND |
| 808 | if (smsc911x_phy_loopbacktest(dev) < 0) { |
| 809 | SMSC_WARNING(HW, "Failed Loop Back Test"); |
| 810 | return -ENODEV; |
| 811 | } |
| 812 | SMSC_TRACE(HW, "Passed Loop Back Test"); |
| 813 | #endif /* USE_PHY_WORK_AROUND */ |
| 814 | |
André Goddard Rosa | af901ca | 2009-11-14 13:09:05 -0200 | [diff] [blame] | 815 | SMSC_TRACE(HW, "phy initialised successfully"); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 816 | return 0; |
| 817 | } |
| 818 | |
| 819 | static int __devinit smsc911x_mii_init(struct platform_device *pdev, |
| 820 | struct net_device *dev) |
| 821 | { |
| 822 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 823 | int err = -ENXIO, i; |
| 824 | |
| 825 | pdata->mii_bus = mdiobus_alloc(); |
| 826 | if (!pdata->mii_bus) { |
| 827 | err = -ENOMEM; |
| 828 | goto err_out_1; |
| 829 | } |
| 830 | |
| 831 | pdata->mii_bus->name = SMSC_MDIONAME; |
| 832 | snprintf(pdata->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id); |
| 833 | pdata->mii_bus->priv = pdata; |
| 834 | pdata->mii_bus->read = smsc911x_mii_read; |
| 835 | pdata->mii_bus->write = smsc911x_mii_write; |
| 836 | pdata->mii_bus->irq = pdata->phy_irq; |
| 837 | for (i = 0; i < PHY_MAX_ADDR; ++i) |
| 838 | pdata->mii_bus->irq[i] = PHY_POLL; |
| 839 | |
| 840 | pdata->mii_bus->parent = &pdev->dev; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 841 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 842 | switch (pdata->idrev & 0xFFFF0000) { |
| 843 | case 0x01170000: |
| 844 | case 0x01150000: |
| 845 | case 0x117A0000: |
| 846 | case 0x115A0000: |
| 847 | /* External PHY supported, try to autodetect */ |
Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 848 | smsc911x_phy_initialise_external(pdata); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 849 | break; |
| 850 | default: |
| 851 | SMSC_TRACE(HW, "External PHY is not supported, " |
| 852 | "using internal PHY"); |
Steve Glendinning | d23f028 | 2009-01-27 06:51:11 +0000 | [diff] [blame] | 853 | pdata->using_extphy = 0; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 854 | break; |
| 855 | } |
| 856 | |
| 857 | if (!pdata->using_extphy) { |
| 858 | /* Mask all PHYs except ID 1 (internal) */ |
| 859 | pdata->mii_bus->phy_mask = ~(1 << 1); |
| 860 | } |
| 861 | |
| 862 | if (mdiobus_register(pdata->mii_bus)) { |
| 863 | SMSC_WARNING(PROBE, "Error registering mii bus"); |
| 864 | goto err_out_free_bus_2; |
| 865 | } |
| 866 | |
| 867 | if (smsc911x_mii_probe(dev) < 0) { |
| 868 | SMSC_WARNING(PROBE, "Error registering mii bus"); |
| 869 | goto err_out_unregister_bus_3; |
| 870 | } |
| 871 | |
| 872 | return 0; |
| 873 | |
| 874 | err_out_unregister_bus_3: |
| 875 | mdiobus_unregister(pdata->mii_bus); |
| 876 | err_out_free_bus_2: |
| 877 | mdiobus_free(pdata->mii_bus); |
| 878 | err_out_1: |
| 879 | return err; |
| 880 | } |
| 881 | |
| 882 | /* Gets the number of tx statuses in the fifo */ |
| 883 | static unsigned int smsc911x_tx_get_txstatcount(struct smsc911x_data *pdata) |
| 884 | { |
| 885 | return (smsc911x_reg_read(pdata, TX_FIFO_INF) |
| 886 | & TX_FIFO_INF_TSUSED_) >> 16; |
| 887 | } |
| 888 | |
| 889 | /* Reads tx statuses and increments counters where necessary */ |
| 890 | static void smsc911x_tx_update_txcounters(struct net_device *dev) |
| 891 | { |
| 892 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 893 | unsigned int tx_stat; |
| 894 | |
| 895 | while ((tx_stat = smsc911x_tx_get_txstatus(pdata)) != 0) { |
| 896 | if (unlikely(tx_stat & 0x80000000)) { |
| 897 | /* In this driver the packet tag is used as the packet |
| 898 | * length. Since a packet length can never reach the |
| 899 | * size of 0x8000, this bit is reserved. It is worth |
| 900 | * noting that the "reserved bit" in the warning above |
| 901 | * does not reference a hardware defined reserved bit |
| 902 | * but rather a driver defined one. |
| 903 | */ |
| 904 | SMSC_WARNING(HW, |
| 905 | "Packet tag reserved bit is high"); |
| 906 | } else { |
Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 907 | if (unlikely(tx_stat & TX_STS_ES_)) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 908 | dev->stats.tx_errors++; |
| 909 | } else { |
| 910 | dev->stats.tx_packets++; |
| 911 | dev->stats.tx_bytes += (tx_stat >> 16); |
| 912 | } |
Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 913 | if (unlikely(tx_stat & TX_STS_EXCESS_COL_)) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 914 | dev->stats.collisions += 16; |
| 915 | dev->stats.tx_aborted_errors += 1; |
| 916 | } else { |
| 917 | dev->stats.collisions += |
| 918 | ((tx_stat >> 3) & 0xF); |
| 919 | } |
Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 920 | if (unlikely(tx_stat & TX_STS_LOST_CARRIER_)) |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 921 | dev->stats.tx_carrier_errors += 1; |
Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 922 | if (unlikely(tx_stat & TX_STS_LATE_COL_)) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 923 | dev->stats.collisions++; |
| 924 | dev->stats.tx_aborted_errors++; |
| 925 | } |
| 926 | } |
| 927 | } |
| 928 | } |
| 929 | |
| 930 | /* Increments the Rx error counters */ |
| 931 | static void |
| 932 | smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat) |
| 933 | { |
| 934 | int crc_err = 0; |
| 935 | |
Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 936 | if (unlikely(rxstat & RX_STS_ES_)) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 937 | dev->stats.rx_errors++; |
Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 938 | if (unlikely(rxstat & RX_STS_CRC_ERR_)) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 939 | dev->stats.rx_crc_errors++; |
| 940 | crc_err = 1; |
| 941 | } |
| 942 | } |
| 943 | if (likely(!crc_err)) { |
Steve Glendinning | 785b6f9 | 2009-03-19 00:24:44 +0000 | [diff] [blame] | 944 | if (unlikely((rxstat & RX_STS_FRAME_TYPE_) && |
| 945 | (rxstat & RX_STS_LENGTH_ERR_))) |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 946 | dev->stats.rx_length_errors++; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 947 | if (rxstat & RX_STS_MCAST_) |
| 948 | dev->stats.multicast++; |
| 949 | } |
| 950 | } |
| 951 | |
| 952 | /* Quickly dumps bad packets */ |
| 953 | static void |
| 954 | smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) |
| 955 | { |
| 956 | unsigned int pktwords = (pktbytes + NET_IP_ALIGN + 3) >> 2; |
| 957 | |
| 958 | if (likely(pktwords >= 4)) { |
| 959 | unsigned int timeout = 500; |
| 960 | unsigned int val; |
| 961 | smsc911x_reg_write(pdata, RX_DP_CTRL, RX_DP_CTRL_RX_FFWD_); |
| 962 | do { |
| 963 | udelay(1); |
| 964 | val = smsc911x_reg_read(pdata, RX_DP_CTRL); |
Steve Glendinning | 8dacd54 | 2009-03-04 07:33:24 +0000 | [diff] [blame] | 965 | } while ((val & RX_DP_CTRL_RX_FFWD_) && --timeout); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 966 | |
| 967 | if (unlikely(timeout == 0)) |
| 968 | SMSC_WARNING(HW, "Timed out waiting for " |
| 969 | "RX FFWD to finish, RX_DP_CTRL: 0x%08X", val); |
| 970 | } else { |
| 971 | unsigned int temp; |
| 972 | while (pktwords--) |
| 973 | temp = smsc911x_reg_read(pdata, RX_DATA_FIFO); |
| 974 | } |
| 975 | } |
| 976 | |
| 977 | /* NAPI poll function */ |
| 978 | static int smsc911x_poll(struct napi_struct *napi, int budget) |
| 979 | { |
| 980 | struct smsc911x_data *pdata = |
| 981 | container_of(napi, struct smsc911x_data, napi); |
| 982 | struct net_device *dev = pdata->dev; |
| 983 | int npackets = 0; |
| 984 | |
Sriram | f88c5b9 | 2009-11-12 02:14:38 +0000 | [diff] [blame] | 985 | while (npackets < budget) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 986 | unsigned int pktlength; |
| 987 | unsigned int pktwords; |
| 988 | struct sk_buff *skb; |
| 989 | unsigned int rxstat = smsc911x_rx_get_rxstatus(pdata); |
| 990 | |
| 991 | if (!rxstat) { |
| 992 | unsigned int temp; |
| 993 | /* We processed all packets available. Tell NAPI it can |
| 994 | * stop polling then re-enable rx interrupts */ |
| 995 | smsc911x_reg_write(pdata, INT_STS, INT_STS_RSFL_); |
Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 996 | napi_complete(napi); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 997 | temp = smsc911x_reg_read(pdata, INT_EN); |
| 998 | temp |= INT_EN_RSFL_EN_; |
| 999 | smsc911x_reg_write(pdata, INT_EN, temp); |
| 1000 | break; |
| 1001 | } |
| 1002 | |
| 1003 | /* Count packet for NAPI scheduling, even if it has an error. |
| 1004 | * Error packets still require cycles to discard */ |
| 1005 | npackets++; |
| 1006 | |
| 1007 | pktlength = ((rxstat & 0x3FFF0000) >> 16); |
| 1008 | pktwords = (pktlength + NET_IP_ALIGN + 3) >> 2; |
| 1009 | smsc911x_rx_counterrors(dev, rxstat); |
| 1010 | |
| 1011 | if (unlikely(rxstat & RX_STS_ES_)) { |
| 1012 | SMSC_WARNING(RX_ERR, |
| 1013 | "Discarding packet with error bit set"); |
| 1014 | /* Packet has an error, discard it and continue with |
| 1015 | * the next */ |
| 1016 | smsc911x_rx_fastforward(pdata, pktwords); |
| 1017 | dev->stats.rx_dropped++; |
| 1018 | continue; |
| 1019 | } |
| 1020 | |
| 1021 | skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN); |
| 1022 | if (unlikely(!skb)) { |
| 1023 | SMSC_WARNING(RX_ERR, |
| 1024 | "Unable to allocate skb for rx packet"); |
| 1025 | /* Drop the packet and stop this polling iteration */ |
| 1026 | smsc911x_rx_fastforward(pdata, pktwords); |
| 1027 | dev->stats.rx_dropped++; |
| 1028 | break; |
| 1029 | } |
| 1030 | |
| 1031 | skb->data = skb->head; |
| 1032 | skb_reset_tail_pointer(skb); |
| 1033 | |
| 1034 | /* Align IP on 16B boundary */ |
| 1035 | skb_reserve(skb, NET_IP_ALIGN); |
| 1036 | skb_put(skb, pktlength - 4); |
| 1037 | smsc911x_rx_readfifo(pdata, (unsigned int *)skb->head, |
| 1038 | pktwords); |
| 1039 | skb->protocol = eth_type_trans(skb, dev); |
| 1040 | skb->ip_summed = CHECKSUM_NONE; |
| 1041 | netif_receive_skb(skb); |
| 1042 | |
| 1043 | /* Update counters */ |
| 1044 | dev->stats.rx_packets++; |
| 1045 | dev->stats.rx_bytes += (pktlength - 4); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1046 | } |
| 1047 | |
| 1048 | /* Return total received packets */ |
| 1049 | return npackets; |
| 1050 | } |
| 1051 | |
| 1052 | /* Returns hash bit number for given MAC address |
| 1053 | * Example: |
| 1054 | * 01 00 5E 00 00 01 -> returns bit number 31 */ |
| 1055 | static unsigned int smsc911x_hash(char addr[ETH_ALEN]) |
| 1056 | { |
| 1057 | return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f; |
| 1058 | } |
| 1059 | |
| 1060 | static void smsc911x_rx_multicast_update(struct smsc911x_data *pdata) |
| 1061 | { |
| 1062 | /* Performs the multicast & mac_cr update. This is called when |
| 1063 | * safe on the current hardware, and with the mac_lock held */ |
| 1064 | unsigned int mac_cr; |
| 1065 | |
| 1066 | SMSC_ASSERT_MAC_LOCK(pdata); |
| 1067 | |
| 1068 | mac_cr = smsc911x_mac_read(pdata, MAC_CR); |
| 1069 | mac_cr |= pdata->set_bits_mask; |
| 1070 | mac_cr &= ~(pdata->clear_bits_mask); |
| 1071 | smsc911x_mac_write(pdata, MAC_CR, mac_cr); |
| 1072 | smsc911x_mac_write(pdata, HASHH, pdata->hashhi); |
| 1073 | smsc911x_mac_write(pdata, HASHL, pdata->hashlo); |
| 1074 | SMSC_TRACE(HW, "maccr 0x%08X, HASHH 0x%08X, HASHL 0x%08X", |
| 1075 | mac_cr, pdata->hashhi, pdata->hashlo); |
| 1076 | } |
| 1077 | |
| 1078 | static void smsc911x_rx_multicast_update_workaround(struct smsc911x_data *pdata) |
| 1079 | { |
| 1080 | unsigned int mac_cr; |
| 1081 | |
| 1082 | /* This function is only called for older LAN911x devices |
| 1083 | * (revA or revB), where MAC_CR, HASHH and HASHL should not |
| 1084 | * be modified during Rx - newer devices immediately update the |
| 1085 | * registers. |
| 1086 | * |
| 1087 | * This is called from interrupt context */ |
| 1088 | |
| 1089 | spin_lock(&pdata->mac_lock); |
| 1090 | |
| 1091 | /* Check Rx has stopped */ |
| 1092 | if (smsc911x_mac_read(pdata, MAC_CR) & MAC_CR_RXEN_) |
| 1093 | SMSC_WARNING(DRV, "Rx not stopped"); |
| 1094 | |
| 1095 | /* Perform the update - safe to do now Rx has stopped */ |
| 1096 | smsc911x_rx_multicast_update(pdata); |
| 1097 | |
| 1098 | /* Re-enable Rx */ |
| 1099 | mac_cr = smsc911x_mac_read(pdata, MAC_CR); |
| 1100 | mac_cr |= MAC_CR_RXEN_; |
| 1101 | smsc911x_mac_write(pdata, MAC_CR, mac_cr); |
| 1102 | |
| 1103 | pdata->multicast_update_pending = 0; |
| 1104 | |
| 1105 | spin_unlock(&pdata->mac_lock); |
| 1106 | } |
| 1107 | |
| 1108 | static int smsc911x_soft_reset(struct smsc911x_data *pdata) |
| 1109 | { |
| 1110 | unsigned int timeout; |
| 1111 | unsigned int temp; |
| 1112 | |
| 1113 | /* Reset the LAN911x */ |
| 1114 | smsc911x_reg_write(pdata, HW_CFG, HW_CFG_SRST_); |
| 1115 | timeout = 10; |
| 1116 | do { |
| 1117 | udelay(10); |
| 1118 | temp = smsc911x_reg_read(pdata, HW_CFG); |
| 1119 | } while ((--timeout) && (temp & HW_CFG_SRST_)); |
| 1120 | |
| 1121 | if (unlikely(temp & HW_CFG_SRST_)) { |
| 1122 | SMSC_WARNING(DRV, "Failed to complete reset"); |
| 1123 | return -EIO; |
| 1124 | } |
| 1125 | return 0; |
| 1126 | } |
| 1127 | |
| 1128 | /* Sets the device MAC address to dev_addr, called with mac_lock held */ |
| 1129 | static void |
Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1130 | smsc911x_set_hw_mac_address(struct smsc911x_data *pdata, u8 dev_addr[6]) |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1131 | { |
| 1132 | u32 mac_high16 = (dev_addr[5] << 8) | dev_addr[4]; |
| 1133 | u32 mac_low32 = (dev_addr[3] << 24) | (dev_addr[2] << 16) | |
| 1134 | (dev_addr[1] << 8) | dev_addr[0]; |
| 1135 | |
| 1136 | SMSC_ASSERT_MAC_LOCK(pdata); |
| 1137 | |
| 1138 | smsc911x_mac_write(pdata, ADDRH, mac_high16); |
| 1139 | smsc911x_mac_write(pdata, ADDRL, mac_low32); |
| 1140 | } |
| 1141 | |
| 1142 | static int smsc911x_open(struct net_device *dev) |
| 1143 | { |
| 1144 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1145 | unsigned int timeout; |
| 1146 | unsigned int temp; |
| 1147 | unsigned int intcfg; |
| 1148 | |
| 1149 | /* if the phy is not yet registered, retry later*/ |
| 1150 | if (!pdata->phy_dev) { |
| 1151 | SMSC_WARNING(HW, "phy_dev is NULL"); |
| 1152 | return -EAGAIN; |
| 1153 | } |
| 1154 | |
| 1155 | if (!is_valid_ether_addr(dev->dev_addr)) { |
| 1156 | SMSC_WARNING(HW, "dev_addr is not a valid MAC address"); |
| 1157 | return -EADDRNOTAVAIL; |
| 1158 | } |
| 1159 | |
| 1160 | /* Reset the LAN911x */ |
| 1161 | if (smsc911x_soft_reset(pdata)) { |
| 1162 | SMSC_WARNING(HW, "soft reset failed"); |
| 1163 | return -EIO; |
| 1164 | } |
| 1165 | |
| 1166 | smsc911x_reg_write(pdata, HW_CFG, 0x00050000); |
| 1167 | smsc911x_reg_write(pdata, AFC_CFG, 0x006E3740); |
| 1168 | |
| 1169 | /* Make sure EEPROM has finished loading before setting GPIO_CFG */ |
| 1170 | timeout = 50; |
Steve Glendinning | f7efb6c | 2009-03-04 07:33:25 +0000 | [diff] [blame] | 1171 | while ((smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) && |
| 1172 | --timeout) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1173 | udelay(10); |
| 1174 | } |
| 1175 | |
| 1176 | if (unlikely(timeout == 0)) |
| 1177 | SMSC_WARNING(IFUP, |
| 1178 | "Timed out waiting for EEPROM busy bit to clear"); |
| 1179 | |
| 1180 | smsc911x_reg_write(pdata, GPIO_CFG, 0x70070000); |
| 1181 | |
| 1182 | /* The soft reset above cleared the device's MAC address, |
| 1183 | * restore it from local copy (set in probe) */ |
| 1184 | spin_lock_irq(&pdata->mac_lock); |
Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1185 | smsc911x_set_hw_mac_address(pdata, dev->dev_addr); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1186 | spin_unlock_irq(&pdata->mac_lock); |
| 1187 | |
| 1188 | /* Initialise irqs, but leave all sources disabled */ |
| 1189 | smsc911x_reg_write(pdata, INT_EN, 0); |
| 1190 | smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); |
| 1191 | |
| 1192 | /* Set interrupt deassertion to 100uS */ |
| 1193 | intcfg = ((10 << 24) | INT_CFG_IRQ_EN_); |
| 1194 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1195 | if (pdata->config.irq_polarity) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1196 | SMSC_TRACE(IFUP, "irq polarity: active high"); |
| 1197 | intcfg |= INT_CFG_IRQ_POL_; |
| 1198 | } else { |
| 1199 | SMSC_TRACE(IFUP, "irq polarity: active low"); |
| 1200 | } |
| 1201 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1202 | if (pdata->config.irq_type) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1203 | SMSC_TRACE(IFUP, "irq type: push-pull"); |
| 1204 | intcfg |= INT_CFG_IRQ_TYPE_; |
| 1205 | } else { |
| 1206 | SMSC_TRACE(IFUP, "irq type: open drain"); |
| 1207 | } |
| 1208 | |
| 1209 | smsc911x_reg_write(pdata, INT_CFG, intcfg); |
| 1210 | |
| 1211 | SMSC_TRACE(IFUP, "Testing irq handler using IRQ %d", dev->irq); |
| 1212 | pdata->software_irq_signal = 0; |
| 1213 | smp_wmb(); |
| 1214 | |
| 1215 | temp = smsc911x_reg_read(pdata, INT_EN); |
| 1216 | temp |= INT_EN_SW_INT_EN_; |
| 1217 | smsc911x_reg_write(pdata, INT_EN, temp); |
| 1218 | |
| 1219 | timeout = 1000; |
| 1220 | while (timeout--) { |
| 1221 | if (pdata->software_irq_signal) |
| 1222 | break; |
| 1223 | msleep(1); |
| 1224 | } |
| 1225 | |
| 1226 | if (!pdata->software_irq_signal) { |
| 1227 | dev_warn(&dev->dev, "ISR failed signaling test (IRQ %d)\n", |
| 1228 | dev->irq); |
| 1229 | return -ENODEV; |
| 1230 | } |
| 1231 | SMSC_TRACE(IFUP, "IRQ handler passed test using IRQ %d", dev->irq); |
| 1232 | |
| 1233 | dev_info(&dev->dev, "SMSC911x/921x identified at %#08lx, IRQ: %d\n", |
| 1234 | (unsigned long)pdata->ioaddr, dev->irq); |
| 1235 | |
Steve Glendinning | 44c1d6f | 2009-03-18 23:37:18 -0700 | [diff] [blame] | 1236 | /* Reset the last known duplex and carrier */ |
| 1237 | pdata->last_duplex = -1; |
| 1238 | pdata->last_carrier = -1; |
| 1239 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1240 | /* Bring the PHY up */ |
| 1241 | phy_start(pdata->phy_dev); |
| 1242 | |
| 1243 | temp = smsc911x_reg_read(pdata, HW_CFG); |
| 1244 | /* Preserve TX FIFO size and external PHY configuration */ |
| 1245 | temp &= (HW_CFG_TX_FIF_SZ_|0x00000FFF); |
| 1246 | temp |= HW_CFG_SF_; |
| 1247 | smsc911x_reg_write(pdata, HW_CFG, temp); |
| 1248 | |
| 1249 | temp = smsc911x_reg_read(pdata, FIFO_INT); |
| 1250 | temp |= FIFO_INT_TX_AVAIL_LEVEL_; |
| 1251 | temp &= ~(FIFO_INT_RX_STS_LEVEL_); |
| 1252 | smsc911x_reg_write(pdata, FIFO_INT, temp); |
| 1253 | |
| 1254 | /* set RX Data offset to 2 bytes for alignment */ |
| 1255 | smsc911x_reg_write(pdata, RX_CFG, (2 << 8)); |
| 1256 | |
| 1257 | /* enable NAPI polling before enabling RX interrupts */ |
| 1258 | napi_enable(&pdata->napi); |
| 1259 | |
| 1260 | temp = smsc911x_reg_read(pdata, INT_EN); |
Steve Glendinning | 1373c0f | 2009-01-26 21:33:16 -0800 | [diff] [blame] | 1261 | temp |= (INT_EN_TDFA_EN_ | INT_EN_RSFL_EN_ | INT_EN_RXSTOP_INT_EN_); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1262 | smsc911x_reg_write(pdata, INT_EN, temp); |
| 1263 | |
| 1264 | spin_lock_irq(&pdata->mac_lock); |
| 1265 | temp = smsc911x_mac_read(pdata, MAC_CR); |
| 1266 | temp |= (MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); |
| 1267 | smsc911x_mac_write(pdata, MAC_CR, temp); |
| 1268 | spin_unlock_irq(&pdata->mac_lock); |
| 1269 | |
| 1270 | smsc911x_reg_write(pdata, TX_CFG, TX_CFG_TX_ON_); |
| 1271 | |
| 1272 | netif_start_queue(dev); |
| 1273 | return 0; |
| 1274 | } |
| 1275 | |
| 1276 | /* Entry point for stopping the interface */ |
| 1277 | static int smsc911x_stop(struct net_device *dev) |
| 1278 | { |
| 1279 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1280 | unsigned int temp; |
| 1281 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1282 | /* Disable all device interrupts */ |
| 1283 | temp = smsc911x_reg_read(pdata, INT_CFG); |
| 1284 | temp &= ~INT_CFG_IRQ_EN_; |
| 1285 | smsc911x_reg_write(pdata, INT_CFG, temp); |
| 1286 | |
| 1287 | /* Stop Tx and Rx polling */ |
| 1288 | netif_stop_queue(dev); |
| 1289 | napi_disable(&pdata->napi); |
| 1290 | |
| 1291 | /* At this point all Rx and Tx activity is stopped */ |
| 1292 | dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); |
| 1293 | smsc911x_tx_update_txcounters(dev); |
| 1294 | |
| 1295 | /* Bring the PHY down */ |
Steve Glendinning | dd04519 | 2008-12-25 16:40:19 -0800 | [diff] [blame] | 1296 | if (pdata->phy_dev) |
| 1297 | phy_stop(pdata->phy_dev); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1298 | |
| 1299 | SMSC_TRACE(IFDOWN, "Interface stopped"); |
| 1300 | return 0; |
| 1301 | } |
| 1302 | |
| 1303 | /* Entry point for transmitting a packet */ |
| 1304 | static int smsc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| 1305 | { |
| 1306 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1307 | unsigned int freespace; |
| 1308 | unsigned int tx_cmd_a; |
| 1309 | unsigned int tx_cmd_b; |
| 1310 | unsigned int temp; |
| 1311 | u32 wrsz; |
| 1312 | ulong bufp; |
| 1313 | |
| 1314 | freespace = smsc911x_reg_read(pdata, TX_FIFO_INF) & TX_FIFO_INF_TDFREE_; |
| 1315 | |
| 1316 | if (unlikely(freespace < TX_FIFO_LOW_THRESHOLD)) |
| 1317 | SMSC_WARNING(TX_ERR, |
| 1318 | "Tx data fifo low, space available: %d", freespace); |
| 1319 | |
| 1320 | /* Word alignment adjustment */ |
| 1321 | tx_cmd_a = (u32)((ulong)skb->data & 0x03) << 16; |
| 1322 | tx_cmd_a |= TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; |
| 1323 | tx_cmd_a |= (unsigned int)skb->len; |
| 1324 | |
| 1325 | tx_cmd_b = ((unsigned int)skb->len) << 16; |
| 1326 | tx_cmd_b |= (unsigned int)skb->len; |
| 1327 | |
| 1328 | smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_a); |
| 1329 | smsc911x_reg_write(pdata, TX_DATA_FIFO, tx_cmd_b); |
| 1330 | |
| 1331 | bufp = (ulong)skb->data & (~0x3); |
| 1332 | wrsz = (u32)skb->len + 3; |
| 1333 | wrsz += (u32)((ulong)skb->data & 0x3); |
| 1334 | wrsz >>= 2; |
| 1335 | |
| 1336 | smsc911x_tx_writefifo(pdata, (unsigned int *)bufp, wrsz); |
| 1337 | freespace -= (skb->len + 32); |
| 1338 | dev_kfree_skb(skb); |
| 1339 | dev->trans_start = jiffies; |
| 1340 | |
| 1341 | if (unlikely(smsc911x_tx_get_txstatcount(pdata) >= 30)) |
| 1342 | smsc911x_tx_update_txcounters(dev); |
| 1343 | |
| 1344 | if (freespace < TX_FIFO_LOW_THRESHOLD) { |
| 1345 | netif_stop_queue(dev); |
| 1346 | temp = smsc911x_reg_read(pdata, FIFO_INT); |
| 1347 | temp &= 0x00FFFFFF; |
| 1348 | temp |= 0x32000000; |
| 1349 | smsc911x_reg_write(pdata, FIFO_INT, temp); |
| 1350 | } |
| 1351 | |
| 1352 | return NETDEV_TX_OK; |
| 1353 | } |
| 1354 | |
| 1355 | /* Entry point for getting status counters */ |
| 1356 | static struct net_device_stats *smsc911x_get_stats(struct net_device *dev) |
| 1357 | { |
| 1358 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1359 | smsc911x_tx_update_txcounters(dev); |
| 1360 | dev->stats.rx_dropped += smsc911x_reg_read(pdata, RX_DROP); |
| 1361 | return &dev->stats; |
| 1362 | } |
| 1363 | |
| 1364 | /* Entry point for setting addressing modes */ |
| 1365 | static void smsc911x_set_multicast_list(struct net_device *dev) |
| 1366 | { |
| 1367 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1368 | unsigned long flags; |
| 1369 | |
| 1370 | if (dev->flags & IFF_PROMISC) { |
| 1371 | /* Enabling promiscuous mode */ |
| 1372 | pdata->set_bits_mask = MAC_CR_PRMS_; |
| 1373 | pdata->clear_bits_mask = (MAC_CR_MCPAS_ | MAC_CR_HPFILT_); |
| 1374 | pdata->hashhi = 0; |
| 1375 | pdata->hashlo = 0; |
| 1376 | } else if (dev->flags & IFF_ALLMULTI) { |
| 1377 | /* Enabling all multicast mode */ |
| 1378 | pdata->set_bits_mask = MAC_CR_MCPAS_; |
| 1379 | pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_HPFILT_); |
| 1380 | pdata->hashhi = 0; |
| 1381 | pdata->hashlo = 0; |
Jiri Pirko | 4cd24ea | 2010-02-08 04:30:35 +0000 | [diff] [blame] | 1382 | } else if (!netdev_mc_empty(dev)) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1383 | /* Enabling specific multicast addresses */ |
| 1384 | unsigned int hash_high = 0; |
| 1385 | unsigned int hash_low = 0; |
Jiri Pirko | 2a0d18f | 2010-02-17 23:22:38 +0000 | [diff] [blame] | 1386 | struct dev_mc_list *mc_list; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1387 | |
| 1388 | pdata->set_bits_mask = MAC_CR_HPFILT_; |
| 1389 | pdata->clear_bits_mask = (MAC_CR_PRMS_ | MAC_CR_MCPAS_); |
| 1390 | |
Jiri Pirko | 2a0d18f | 2010-02-17 23:22:38 +0000 | [diff] [blame] | 1391 | netdev_for_each_mc_addr(mc_list, dev) { |
| 1392 | unsigned int bitnum = smsc911x_hash(mc_list->dmi_addr); |
| 1393 | unsigned int mask = 0x01 << (bitnum & 0x1F); |
| 1394 | |
| 1395 | if (bitnum & 0x20) |
| 1396 | hash_high |= mask; |
| 1397 | else |
| 1398 | hash_low |= mask; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1399 | } |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1400 | |
| 1401 | pdata->hashhi = hash_high; |
| 1402 | pdata->hashlo = hash_low; |
| 1403 | } else { |
| 1404 | /* Enabling local MAC address only */ |
| 1405 | pdata->set_bits_mask = 0; |
| 1406 | pdata->clear_bits_mask = |
| 1407 | (MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_); |
| 1408 | pdata->hashhi = 0; |
| 1409 | pdata->hashlo = 0; |
| 1410 | } |
| 1411 | |
| 1412 | spin_lock_irqsave(&pdata->mac_lock, flags); |
| 1413 | |
| 1414 | if (pdata->generation <= 1) { |
| 1415 | /* Older hardware revision - cannot change these flags while |
| 1416 | * receiving data */ |
| 1417 | if (!pdata->multicast_update_pending) { |
| 1418 | unsigned int temp; |
| 1419 | SMSC_TRACE(HW, "scheduling mcast update"); |
| 1420 | pdata->multicast_update_pending = 1; |
| 1421 | |
| 1422 | /* Request the hardware to stop, then perform the |
| 1423 | * update when we get an RX_STOP interrupt */ |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1424 | temp = smsc911x_mac_read(pdata, MAC_CR); |
| 1425 | temp &= ~(MAC_CR_RXEN_); |
| 1426 | smsc911x_mac_write(pdata, MAC_CR, temp); |
| 1427 | } else { |
| 1428 | /* There is another update pending, this should now |
| 1429 | * use the newer values */ |
| 1430 | } |
| 1431 | } else { |
| 1432 | /* Newer hardware revision - can write immediately */ |
| 1433 | smsc911x_rx_multicast_update(pdata); |
| 1434 | } |
| 1435 | |
| 1436 | spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| 1437 | } |
| 1438 | |
| 1439 | static irqreturn_t smsc911x_irqhandler(int irq, void *dev_id) |
| 1440 | { |
| 1441 | struct net_device *dev = dev_id; |
| 1442 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1443 | u32 intsts = smsc911x_reg_read(pdata, INT_STS); |
| 1444 | u32 inten = smsc911x_reg_read(pdata, INT_EN); |
| 1445 | int serviced = IRQ_NONE; |
| 1446 | u32 temp; |
| 1447 | |
| 1448 | if (unlikely(intsts & inten & INT_STS_SW_INT_)) { |
| 1449 | temp = smsc911x_reg_read(pdata, INT_EN); |
| 1450 | temp &= (~INT_EN_SW_INT_EN_); |
| 1451 | smsc911x_reg_write(pdata, INT_EN, temp); |
| 1452 | smsc911x_reg_write(pdata, INT_STS, INT_STS_SW_INT_); |
| 1453 | pdata->software_irq_signal = 1; |
| 1454 | smp_wmb(); |
| 1455 | serviced = IRQ_HANDLED; |
| 1456 | } |
| 1457 | |
| 1458 | if (unlikely(intsts & inten & INT_STS_RXSTOP_INT_)) { |
| 1459 | /* Called when there is a multicast update scheduled and |
| 1460 | * it is now safe to complete the update */ |
| 1461 | SMSC_TRACE(INTR, "RX Stop interrupt"); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1462 | smsc911x_reg_write(pdata, INT_STS, INT_STS_RXSTOP_INT_); |
Steve Glendinning | 1373c0f | 2009-01-26 21:33:16 -0800 | [diff] [blame] | 1463 | if (pdata->multicast_update_pending) |
| 1464 | smsc911x_rx_multicast_update_workaround(pdata); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1465 | serviced = IRQ_HANDLED; |
| 1466 | } |
| 1467 | |
| 1468 | if (intsts & inten & INT_STS_TDFA_) { |
| 1469 | temp = smsc911x_reg_read(pdata, FIFO_INT); |
| 1470 | temp |= FIFO_INT_TX_AVAIL_LEVEL_; |
| 1471 | smsc911x_reg_write(pdata, FIFO_INT, temp); |
| 1472 | smsc911x_reg_write(pdata, INT_STS, INT_STS_TDFA_); |
| 1473 | netif_wake_queue(dev); |
| 1474 | serviced = IRQ_HANDLED; |
| 1475 | } |
| 1476 | |
| 1477 | if (unlikely(intsts & inten & INT_STS_RXE_)) { |
| 1478 | SMSC_TRACE(INTR, "RX Error interrupt"); |
| 1479 | smsc911x_reg_write(pdata, INT_STS, INT_STS_RXE_); |
| 1480 | serviced = IRQ_HANDLED; |
| 1481 | } |
| 1482 | |
| 1483 | if (likely(intsts & inten & INT_STS_RSFL_)) { |
Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 1484 | if (likely(napi_schedule_prep(&pdata->napi))) { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1485 | /* Disable Rx interrupts */ |
| 1486 | temp = smsc911x_reg_read(pdata, INT_EN); |
| 1487 | temp &= (~INT_EN_RSFL_EN_); |
| 1488 | smsc911x_reg_write(pdata, INT_EN, temp); |
| 1489 | /* Schedule a NAPI poll */ |
Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 1490 | __napi_schedule(&pdata->napi); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1491 | } else { |
| 1492 | SMSC_WARNING(RX_ERR, |
Ben Hutchings | 288379f | 2009-01-19 16:43:59 -0800 | [diff] [blame] | 1493 | "napi_schedule_prep failed"); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1494 | } |
| 1495 | serviced = IRQ_HANDLED; |
| 1496 | } |
| 1497 | |
| 1498 | return serviced; |
| 1499 | } |
| 1500 | |
| 1501 | #ifdef CONFIG_NET_POLL_CONTROLLER |
Steve Glendinning | 1757ab2 | 2008-12-12 22:31:16 -0800 | [diff] [blame] | 1502 | static void smsc911x_poll_controller(struct net_device *dev) |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1503 | { |
| 1504 | disable_irq(dev->irq); |
| 1505 | smsc911x_irqhandler(0, dev); |
| 1506 | enable_irq(dev->irq); |
| 1507 | } |
| 1508 | #endif /* CONFIG_NET_POLL_CONTROLLER */ |
| 1509 | |
Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1510 | static int smsc911x_set_mac_address(struct net_device *dev, void *p) |
| 1511 | { |
| 1512 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1513 | struct sockaddr *addr = p; |
| 1514 | |
| 1515 | /* On older hardware revisions we cannot change the mac address |
| 1516 | * registers while receiving data. Newer devices can safely change |
| 1517 | * this at any time. */ |
| 1518 | if (pdata->generation <= 1 && netif_running(dev)) |
| 1519 | return -EBUSY; |
| 1520 | |
| 1521 | if (!is_valid_ether_addr(addr->sa_data)) |
| 1522 | return -EADDRNOTAVAIL; |
| 1523 | |
| 1524 | memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); |
| 1525 | |
| 1526 | spin_lock_irq(&pdata->mac_lock); |
| 1527 | smsc911x_set_hw_mac_address(pdata, dev->dev_addr); |
| 1528 | spin_unlock_irq(&pdata->mac_lock); |
| 1529 | |
| 1530 | dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr); |
| 1531 | |
| 1532 | return 0; |
| 1533 | } |
| 1534 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1535 | /* Standard ioctls for mii-tool */ |
| 1536 | static int smsc911x_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) |
| 1537 | { |
| 1538 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1539 | |
| 1540 | if (!netif_running(dev) || !pdata->phy_dev) |
| 1541 | return -EINVAL; |
| 1542 | |
| 1543 | return phy_mii_ioctl(pdata->phy_dev, if_mii(ifr), cmd); |
| 1544 | } |
| 1545 | |
| 1546 | static int |
| 1547 | smsc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) |
| 1548 | { |
| 1549 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1550 | |
| 1551 | cmd->maxtxpkt = 1; |
| 1552 | cmd->maxrxpkt = 1; |
| 1553 | return phy_ethtool_gset(pdata->phy_dev, cmd); |
| 1554 | } |
| 1555 | |
| 1556 | static int |
| 1557 | smsc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) |
| 1558 | { |
| 1559 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1560 | |
| 1561 | return phy_ethtool_sset(pdata->phy_dev, cmd); |
| 1562 | } |
| 1563 | |
| 1564 | static void smsc911x_ethtool_getdrvinfo(struct net_device *dev, |
| 1565 | struct ethtool_drvinfo *info) |
| 1566 | { |
| 1567 | strlcpy(info->driver, SMSC_CHIPNAME, sizeof(info->driver)); |
| 1568 | strlcpy(info->version, SMSC_DRV_VERSION, sizeof(info->version)); |
Kay Sievers | db1d7bf | 2009-01-26 21:12:58 -0800 | [diff] [blame] | 1569 | strlcpy(info->bus_info, dev_name(dev->dev.parent), |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1570 | sizeof(info->bus_info)); |
| 1571 | } |
| 1572 | |
| 1573 | static int smsc911x_ethtool_nwayreset(struct net_device *dev) |
| 1574 | { |
| 1575 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1576 | |
| 1577 | return phy_start_aneg(pdata->phy_dev); |
| 1578 | } |
| 1579 | |
| 1580 | static u32 smsc911x_ethtool_getmsglevel(struct net_device *dev) |
| 1581 | { |
| 1582 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1583 | return pdata->msg_enable; |
| 1584 | } |
| 1585 | |
| 1586 | static void smsc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) |
| 1587 | { |
| 1588 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1589 | pdata->msg_enable = level; |
| 1590 | } |
| 1591 | |
| 1592 | static int smsc911x_ethtool_getregslen(struct net_device *dev) |
| 1593 | { |
| 1594 | return (((E2P_DATA - ID_REV) / 4 + 1) + (WUCSR - MAC_CR) + 1 + 32) * |
| 1595 | sizeof(u32); |
| 1596 | } |
| 1597 | |
| 1598 | static void |
| 1599 | smsc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, |
| 1600 | void *buf) |
| 1601 | { |
| 1602 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1603 | struct phy_device *phy_dev = pdata->phy_dev; |
| 1604 | unsigned long flags; |
| 1605 | unsigned int i; |
| 1606 | unsigned int j = 0; |
| 1607 | u32 *data = buf; |
| 1608 | |
| 1609 | regs->version = pdata->idrev; |
| 1610 | for (i = ID_REV; i <= E2P_DATA; i += (sizeof(u32))) |
| 1611 | data[j++] = smsc911x_reg_read(pdata, i); |
| 1612 | |
| 1613 | for (i = MAC_CR; i <= WUCSR; i++) { |
| 1614 | spin_lock_irqsave(&pdata->mac_lock, flags); |
| 1615 | data[j++] = smsc911x_mac_read(pdata, i); |
| 1616 | spin_unlock_irqrestore(&pdata->mac_lock, flags); |
| 1617 | } |
| 1618 | |
| 1619 | for (i = 0; i <= 31; i++) |
| 1620 | data[j++] = smsc911x_mii_read(phy_dev->bus, phy_dev->addr, i); |
| 1621 | } |
| 1622 | |
| 1623 | static void smsc911x_eeprom_enable_access(struct smsc911x_data *pdata) |
| 1624 | { |
| 1625 | unsigned int temp = smsc911x_reg_read(pdata, GPIO_CFG); |
| 1626 | temp &= ~GPIO_CFG_EEPR_EN_; |
| 1627 | smsc911x_reg_write(pdata, GPIO_CFG, temp); |
| 1628 | msleep(1); |
| 1629 | } |
| 1630 | |
| 1631 | static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op) |
| 1632 | { |
| 1633 | int timeout = 100; |
| 1634 | u32 e2cmd; |
| 1635 | |
| 1636 | SMSC_TRACE(DRV, "op 0x%08x", op); |
| 1637 | if (smsc911x_reg_read(pdata, E2P_CMD) & E2P_CMD_EPC_BUSY_) { |
| 1638 | SMSC_WARNING(DRV, "Busy at start"); |
| 1639 | return -EBUSY; |
| 1640 | } |
| 1641 | |
| 1642 | e2cmd = op | E2P_CMD_EPC_BUSY_; |
| 1643 | smsc911x_reg_write(pdata, E2P_CMD, e2cmd); |
| 1644 | |
| 1645 | do { |
| 1646 | msleep(1); |
| 1647 | e2cmd = smsc911x_reg_read(pdata, E2P_CMD); |
Roel Kluin | 2cf0dbe | 2009-02-20 00:52:19 -0800 | [diff] [blame] | 1648 | } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (--timeout)); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1649 | |
| 1650 | if (!timeout) { |
| 1651 | SMSC_TRACE(DRV, "TIMED OUT"); |
| 1652 | return -EAGAIN; |
| 1653 | } |
| 1654 | |
| 1655 | if (e2cmd & E2P_CMD_EPC_TIMEOUT_) { |
| 1656 | SMSC_TRACE(DRV, "Error occured during eeprom operation"); |
| 1657 | return -EINVAL; |
| 1658 | } |
| 1659 | |
| 1660 | return 0; |
| 1661 | } |
| 1662 | |
| 1663 | static int smsc911x_eeprom_read_location(struct smsc911x_data *pdata, |
| 1664 | u8 address, u8 *data) |
| 1665 | { |
| 1666 | u32 op = E2P_CMD_EPC_CMD_READ_ | address; |
| 1667 | int ret; |
| 1668 | |
| 1669 | SMSC_TRACE(DRV, "address 0x%x", address); |
| 1670 | ret = smsc911x_eeprom_send_cmd(pdata, op); |
| 1671 | |
| 1672 | if (!ret) |
| 1673 | data[address] = smsc911x_reg_read(pdata, E2P_DATA); |
| 1674 | |
| 1675 | return ret; |
| 1676 | } |
| 1677 | |
| 1678 | static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata, |
| 1679 | u8 address, u8 data) |
| 1680 | { |
| 1681 | u32 op = E2P_CMD_EPC_CMD_ERASE_ | address; |
Steve Glendinning | 58add9f | 2009-03-26 07:14:36 +0000 | [diff] [blame] | 1682 | u32 temp; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1683 | int ret; |
| 1684 | |
| 1685 | SMSC_TRACE(DRV, "address 0x%x, data 0x%x", address, data); |
| 1686 | ret = smsc911x_eeprom_send_cmd(pdata, op); |
| 1687 | |
| 1688 | if (!ret) { |
| 1689 | op = E2P_CMD_EPC_CMD_WRITE_ | address; |
| 1690 | smsc911x_reg_write(pdata, E2P_DATA, (u32)data); |
Steve Glendinning | 58add9f | 2009-03-26 07:14:36 +0000 | [diff] [blame] | 1691 | |
| 1692 | /* Workaround for hardware read-after-write restriction */ |
| 1693 | temp = smsc911x_reg_read(pdata, BYTE_TEST); |
| 1694 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1695 | ret = smsc911x_eeprom_send_cmd(pdata, op); |
| 1696 | } |
| 1697 | |
| 1698 | return ret; |
| 1699 | } |
| 1700 | |
| 1701 | static int smsc911x_ethtool_get_eeprom_len(struct net_device *dev) |
| 1702 | { |
| 1703 | return SMSC911X_EEPROM_SIZE; |
| 1704 | } |
| 1705 | |
| 1706 | static int smsc911x_ethtool_get_eeprom(struct net_device *dev, |
| 1707 | struct ethtool_eeprom *eeprom, u8 *data) |
| 1708 | { |
| 1709 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1710 | u8 eeprom_data[SMSC911X_EEPROM_SIZE]; |
| 1711 | int len; |
| 1712 | int i; |
| 1713 | |
| 1714 | smsc911x_eeprom_enable_access(pdata); |
| 1715 | |
| 1716 | len = min(eeprom->len, SMSC911X_EEPROM_SIZE); |
| 1717 | for (i = 0; i < len; i++) { |
| 1718 | int ret = smsc911x_eeprom_read_location(pdata, i, eeprom_data); |
| 1719 | if (ret < 0) { |
| 1720 | eeprom->len = 0; |
| 1721 | return ret; |
| 1722 | } |
| 1723 | } |
| 1724 | |
| 1725 | memcpy(data, &eeprom_data[eeprom->offset], len); |
| 1726 | eeprom->len = len; |
| 1727 | return 0; |
| 1728 | } |
| 1729 | |
| 1730 | static int smsc911x_ethtool_set_eeprom(struct net_device *dev, |
| 1731 | struct ethtool_eeprom *eeprom, u8 *data) |
| 1732 | { |
| 1733 | int ret; |
| 1734 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1735 | |
| 1736 | smsc911x_eeprom_enable_access(pdata); |
| 1737 | smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWEN_); |
| 1738 | ret = smsc911x_eeprom_write_location(pdata, eeprom->offset, *data); |
| 1739 | smsc911x_eeprom_send_cmd(pdata, E2P_CMD_EPC_CMD_EWDS_); |
| 1740 | |
| 1741 | /* Single byte write, according to man page */ |
| 1742 | eeprom->len = 1; |
| 1743 | |
| 1744 | return ret; |
| 1745 | } |
| 1746 | |
Steve Glendinning | cb5b04f | 2008-12-25 16:41:09 -0800 | [diff] [blame] | 1747 | static const struct ethtool_ops smsc911x_ethtool_ops = { |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1748 | .get_settings = smsc911x_ethtool_getsettings, |
| 1749 | .set_settings = smsc911x_ethtool_setsettings, |
| 1750 | .get_link = ethtool_op_get_link, |
| 1751 | .get_drvinfo = smsc911x_ethtool_getdrvinfo, |
| 1752 | .nway_reset = smsc911x_ethtool_nwayreset, |
| 1753 | .get_msglevel = smsc911x_ethtool_getmsglevel, |
| 1754 | .set_msglevel = smsc911x_ethtool_setmsglevel, |
| 1755 | .get_regs_len = smsc911x_ethtool_getregslen, |
| 1756 | .get_regs = smsc911x_ethtool_getregs, |
| 1757 | .get_eeprom_len = smsc911x_ethtool_get_eeprom_len, |
| 1758 | .get_eeprom = smsc911x_ethtool_get_eeprom, |
| 1759 | .set_eeprom = smsc911x_ethtool_set_eeprom, |
| 1760 | }; |
| 1761 | |
Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1762 | static const struct net_device_ops smsc911x_netdev_ops = { |
| 1763 | .ndo_open = smsc911x_open, |
| 1764 | .ndo_stop = smsc911x_stop, |
| 1765 | .ndo_start_xmit = smsc911x_hard_start_xmit, |
| 1766 | .ndo_get_stats = smsc911x_get_stats, |
| 1767 | .ndo_set_multicast_list = smsc911x_set_multicast_list, |
| 1768 | .ndo_do_ioctl = smsc911x_do_ioctl, |
Ben Hutchings | 635ecaa | 2009-07-09 17:59:01 +0000 | [diff] [blame] | 1769 | .ndo_change_mtu = eth_change_mtu, |
Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1770 | .ndo_validate_addr = eth_validate_addr, |
Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 1771 | .ndo_set_mac_address = smsc911x_set_mac_address, |
Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1772 | #ifdef CONFIG_NET_POLL_CONTROLLER |
| 1773 | .ndo_poll_controller = smsc911x_poll_controller, |
| 1774 | #endif |
| 1775 | }; |
| 1776 | |
Steve Glendinning | 31f4574 | 2009-01-27 06:51:12 +0000 | [diff] [blame] | 1777 | /* copies the current mac address from hardware to dev->dev_addr */ |
| 1778 | static void __devinit smsc911x_read_mac_address(struct net_device *dev) |
| 1779 | { |
| 1780 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1781 | u32 mac_high16 = smsc911x_mac_read(pdata, ADDRH); |
| 1782 | u32 mac_low32 = smsc911x_mac_read(pdata, ADDRL); |
| 1783 | |
| 1784 | dev->dev_addr[0] = (u8)(mac_low32); |
| 1785 | dev->dev_addr[1] = (u8)(mac_low32 >> 8); |
| 1786 | dev->dev_addr[2] = (u8)(mac_low32 >> 16); |
| 1787 | dev->dev_addr[3] = (u8)(mac_low32 >> 24); |
| 1788 | dev->dev_addr[4] = (u8)(mac_high16); |
| 1789 | dev->dev_addr[5] = (u8)(mac_high16 >> 8); |
| 1790 | } |
| 1791 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1792 | /* Initializing private device structures, only called from probe */ |
| 1793 | static int __devinit smsc911x_init(struct net_device *dev) |
| 1794 | { |
| 1795 | struct smsc911x_data *pdata = netdev_priv(dev); |
| 1796 | unsigned int byte_test; |
| 1797 | |
| 1798 | SMSC_TRACE(PROBE, "Driver Parameters:"); |
| 1799 | SMSC_TRACE(PROBE, "LAN base: 0x%08lX", |
| 1800 | (unsigned long)pdata->ioaddr); |
| 1801 | SMSC_TRACE(PROBE, "IRQ: %d", dev->irq); |
| 1802 | SMSC_TRACE(PROBE, "PHY will be autodetected."); |
| 1803 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1804 | spin_lock_init(&pdata->dev_lock); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1805 | |
| 1806 | if (pdata->ioaddr == 0) { |
| 1807 | SMSC_WARNING(PROBE, "pdata->ioaddr: 0x00000000"); |
| 1808 | return -ENODEV; |
| 1809 | } |
| 1810 | |
| 1811 | /* Check byte ordering */ |
| 1812 | byte_test = smsc911x_reg_read(pdata, BYTE_TEST); |
| 1813 | SMSC_TRACE(PROBE, "BYTE_TEST: 0x%08X", byte_test); |
| 1814 | if (byte_test == 0x43218765) { |
| 1815 | SMSC_TRACE(PROBE, "BYTE_TEST looks swapped, " |
| 1816 | "applying WORD_SWAP"); |
| 1817 | smsc911x_reg_write(pdata, WORD_SWAP, 0xffffffff); |
| 1818 | |
| 1819 | /* 1 dummy read of BYTE_TEST is needed after a write to |
| 1820 | * WORD_SWAP before its contents are valid */ |
| 1821 | byte_test = smsc911x_reg_read(pdata, BYTE_TEST); |
| 1822 | |
| 1823 | byte_test = smsc911x_reg_read(pdata, BYTE_TEST); |
| 1824 | } |
| 1825 | |
| 1826 | if (byte_test != 0x87654321) { |
| 1827 | SMSC_WARNING(DRV, "BYTE_TEST: 0x%08X", byte_test); |
| 1828 | if (((byte_test >> 16) & 0xFFFF) == (byte_test & 0xFFFF)) { |
| 1829 | SMSC_WARNING(PROBE, |
| 1830 | "top 16 bits equal to bottom 16 bits"); |
| 1831 | SMSC_TRACE(PROBE, "This may mean the chip is set " |
| 1832 | "for 32 bit while the bus is reading 16 bit"); |
| 1833 | } |
| 1834 | return -ENODEV; |
| 1835 | } |
| 1836 | |
| 1837 | /* Default generation to zero (all workarounds apply) */ |
| 1838 | pdata->generation = 0; |
| 1839 | |
| 1840 | pdata->idrev = smsc911x_reg_read(pdata, ID_REV); |
| 1841 | switch (pdata->idrev & 0xFFFF0000) { |
| 1842 | case 0x01180000: |
| 1843 | case 0x01170000: |
| 1844 | case 0x01160000: |
| 1845 | case 0x01150000: |
| 1846 | /* LAN911[5678] family */ |
| 1847 | pdata->generation = pdata->idrev & 0x0000FFFF; |
| 1848 | break; |
| 1849 | |
| 1850 | case 0x118A0000: |
| 1851 | case 0x117A0000: |
| 1852 | case 0x116A0000: |
| 1853 | case 0x115A0000: |
| 1854 | /* LAN921[5678] family */ |
| 1855 | pdata->generation = 3; |
| 1856 | break; |
| 1857 | |
| 1858 | case 0x92100000: |
| 1859 | case 0x92110000: |
| 1860 | case 0x92200000: |
| 1861 | case 0x92210000: |
| 1862 | /* LAN9210/LAN9211/LAN9220/LAN9221 */ |
| 1863 | pdata->generation = 4; |
| 1864 | break; |
| 1865 | |
| 1866 | default: |
| 1867 | SMSC_WARNING(PROBE, "LAN911x not identified, idrev: 0x%08X", |
| 1868 | pdata->idrev); |
| 1869 | return -ENODEV; |
| 1870 | } |
| 1871 | |
| 1872 | SMSC_TRACE(PROBE, "LAN911x identified, idrev: 0x%08X, generation: %d", |
| 1873 | pdata->idrev, pdata->generation); |
| 1874 | |
| 1875 | if (pdata->generation == 0) |
| 1876 | SMSC_WARNING(PROBE, |
| 1877 | "This driver is not intended for this chip revision"); |
| 1878 | |
Steve Glendinning | 31f4574 | 2009-01-27 06:51:12 +0000 | [diff] [blame] | 1879 | /* workaround for platforms without an eeprom, where the mac address |
| 1880 | * is stored elsewhere and set by the bootloader. This saves the |
| 1881 | * mac address before resetting the device */ |
| 1882 | if (pdata->config.flags & SMSC911X_SAVE_MAC_ADDRESS) |
| 1883 | smsc911x_read_mac_address(dev); |
| 1884 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1885 | /* Reset the LAN911x */ |
| 1886 | if (smsc911x_soft_reset(pdata)) |
| 1887 | return -ENODEV; |
| 1888 | |
| 1889 | /* Disable all interrupt sources until we bring the device up */ |
| 1890 | smsc911x_reg_write(pdata, INT_EN, 0); |
| 1891 | |
| 1892 | ether_setup(dev); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1893 | dev->flags |= IFF_MULTICAST; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1894 | netif_napi_add(dev, &pdata->napi, smsc911x_poll, SMSC_NAPI_WEIGHT); |
Steve Glendinning | 631b756 | 2008-12-25 16:40:47 -0800 | [diff] [blame] | 1895 | dev->netdev_ops = &smsc911x_netdev_ops; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1896 | dev->ethtool_ops = &smsc911x_ethtool_ops; |
| 1897 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1898 | return 0; |
| 1899 | } |
| 1900 | |
| 1901 | static int __devexit smsc911x_drv_remove(struct platform_device *pdev) |
| 1902 | { |
| 1903 | struct net_device *dev; |
| 1904 | struct smsc911x_data *pdata; |
| 1905 | struct resource *res; |
| 1906 | |
| 1907 | dev = platform_get_drvdata(pdev); |
| 1908 | BUG_ON(!dev); |
| 1909 | pdata = netdev_priv(dev); |
| 1910 | BUG_ON(!pdata); |
| 1911 | BUG_ON(!pdata->ioaddr); |
| 1912 | BUG_ON(!pdata->phy_dev); |
| 1913 | |
| 1914 | SMSC_TRACE(IFDOWN, "Stopping driver."); |
| 1915 | |
| 1916 | phy_disconnect(pdata->phy_dev); |
| 1917 | pdata->phy_dev = NULL; |
| 1918 | mdiobus_unregister(pdata->mii_bus); |
| 1919 | mdiobus_free(pdata->mii_bus); |
| 1920 | |
| 1921 | platform_set_drvdata(pdev, NULL); |
| 1922 | unregister_netdev(dev); |
| 1923 | free_irq(dev->irq, dev); |
| 1924 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| 1925 | "smsc911x-memory"); |
| 1926 | if (!res) |
Steve Glendinning | d452273 | 2008-12-25 16:44:01 -0800 | [diff] [blame] | 1927 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1928 | |
Julia Lawall | 3942453 | 2009-07-04 11:31:47 +0000 | [diff] [blame] | 1929 | release_mem_region(res->start, resource_size(res)); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1930 | |
| 1931 | iounmap(pdata->ioaddr); |
| 1932 | |
| 1933 | free_netdev(dev); |
| 1934 | |
| 1935 | return 0; |
| 1936 | } |
| 1937 | |
| 1938 | static int __devinit smsc911x_drv_probe(struct platform_device *pdev) |
| 1939 | { |
| 1940 | struct net_device *dev; |
| 1941 | struct smsc911x_data *pdata; |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1942 | struct smsc911x_platform_config *config = pdev->dev.platform_data; |
Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 1943 | struct resource *res, *irq_res; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1944 | unsigned int intcfg = 0; |
Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 1945 | int res_size, irq_flags; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1946 | int retval; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1947 | |
| 1948 | pr_info("%s: Driver version %s.\n", SMSC_CHIPNAME, SMSC_DRV_VERSION); |
| 1949 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1950 | /* platform data specifies irq & dynamic bus configuration */ |
| 1951 | if (!pdev->dev.platform_data) { |
| 1952 | pr_warning("%s: platform_data not provided\n", SMSC_CHIPNAME); |
| 1953 | retval = -ENODEV; |
| 1954 | goto out_0; |
| 1955 | } |
| 1956 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1957 | res = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| 1958 | "smsc911x-memory"); |
| 1959 | if (!res) |
| 1960 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 1961 | if (!res) { |
| 1962 | pr_warning("%s: Could not allocate resource.\n", |
| 1963 | SMSC_CHIPNAME); |
| 1964 | retval = -ENODEV; |
| 1965 | goto out_0; |
| 1966 | } |
Julia Lawall | 3942453 | 2009-07-04 11:31:47 +0000 | [diff] [blame] | 1967 | res_size = resource_size(res); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1968 | |
Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 1969 | irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| 1970 | if (!irq_res) { |
| 1971 | pr_warning("%s: Could not allocate irq resource.\n", |
| 1972 | SMSC_CHIPNAME); |
| 1973 | retval = -ENODEV; |
| 1974 | goto out_0; |
| 1975 | } |
| 1976 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1977 | if (!request_mem_region(res->start, res_size, SMSC_CHIPNAME)) { |
| 1978 | retval = -EBUSY; |
| 1979 | goto out_0; |
| 1980 | } |
| 1981 | |
| 1982 | dev = alloc_etherdev(sizeof(struct smsc911x_data)); |
| 1983 | if (!dev) { |
| 1984 | pr_warning("%s: Could not allocate device.\n", SMSC_CHIPNAME); |
| 1985 | retval = -ENOMEM; |
| 1986 | goto out_release_io_1; |
| 1987 | } |
| 1988 | |
| 1989 | SET_NETDEV_DEV(dev, &pdev->dev); |
| 1990 | |
| 1991 | pdata = netdev_priv(dev); |
| 1992 | |
Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 1993 | dev->irq = irq_res->start; |
| 1994 | irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1995 | pdata->ioaddr = ioremap_nocache(res->start, res_size); |
| 1996 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 1997 | /* copy config parameters across to pdata */ |
| 1998 | memcpy(&pdata->config, config, sizeof(pdata->config)); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 1999 | |
| 2000 | pdata->dev = dev; |
| 2001 | pdata->msg_enable = ((1 << debug) - 1); |
| 2002 | |
| 2003 | if (pdata->ioaddr == NULL) { |
| 2004 | SMSC_WARNING(PROBE, |
| 2005 | "Error smsc911x base address invalid"); |
| 2006 | retval = -ENOMEM; |
| 2007 | goto out_free_netdev_2; |
| 2008 | } |
| 2009 | |
| 2010 | retval = smsc911x_init(dev); |
| 2011 | if (retval < 0) |
| 2012 | goto out_unmap_io_3; |
| 2013 | |
| 2014 | /* configure irq polarity and type before connecting isr */ |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 2015 | if (pdata->config.irq_polarity == SMSC911X_IRQ_POLARITY_ACTIVE_HIGH) |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2016 | intcfg |= INT_CFG_IRQ_POL_; |
| 2017 | |
Steve Glendinning | 2107fb8 | 2008-11-05 00:35:38 +0000 | [diff] [blame] | 2018 | if (pdata->config.irq_type == SMSC911X_IRQ_TYPE_PUSH_PULL) |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2019 | intcfg |= INT_CFG_IRQ_TYPE_; |
| 2020 | |
| 2021 | smsc911x_reg_write(pdata, INT_CFG, intcfg); |
| 2022 | |
| 2023 | /* Ensure interrupts are globally disabled before connecting ISR */ |
| 2024 | smsc911x_reg_write(pdata, INT_EN, 0); |
| 2025 | smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF); |
| 2026 | |
Steve Glendinning | 61307ed | 2009-01-27 06:51:09 +0000 | [diff] [blame] | 2027 | retval = request_irq(dev->irq, smsc911x_irqhandler, |
Steve Glendinning | e81259b | 2009-01-27 06:51:10 +0000 | [diff] [blame] | 2028 | irq_flags | IRQF_SHARED, dev->name, dev); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2029 | if (retval) { |
| 2030 | SMSC_WARNING(PROBE, |
| 2031 | "Unable to claim requested irq: %d", dev->irq); |
| 2032 | goto out_unmap_io_3; |
| 2033 | } |
| 2034 | |
| 2035 | platform_set_drvdata(pdev, dev); |
| 2036 | |
| 2037 | retval = register_netdev(dev); |
| 2038 | if (retval) { |
| 2039 | SMSC_WARNING(PROBE, |
| 2040 | "Error %i registering device", retval); |
| 2041 | goto out_unset_drvdata_4; |
| 2042 | } else { |
| 2043 | SMSC_TRACE(PROBE, "Network interface: \"%s\"", dev->name); |
| 2044 | } |
| 2045 | |
| 2046 | spin_lock_init(&pdata->mac_lock); |
| 2047 | |
| 2048 | retval = smsc911x_mii_init(pdev, dev); |
| 2049 | if (retval) { |
| 2050 | SMSC_WARNING(PROBE, |
| 2051 | "Error %i initialising mii", retval); |
| 2052 | goto out_unregister_netdev_5; |
| 2053 | } |
| 2054 | |
| 2055 | spin_lock_irq(&pdata->mac_lock); |
| 2056 | |
| 2057 | /* Check if mac address has been specified when bringing interface up */ |
| 2058 | if (is_valid_ether_addr(dev->dev_addr)) { |
Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 2059 | smsc911x_set_hw_mac_address(pdata, dev->dev_addr); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2060 | SMSC_TRACE(PROBE, "MAC Address is specified by configuration"); |
Manuel Lauss | aace495 | 2009-10-13 07:25:49 +0000 | [diff] [blame] | 2061 | } else if (is_valid_ether_addr(pdata->config.mac)) { |
| 2062 | memcpy(dev->dev_addr, pdata->config.mac, 6); |
| 2063 | SMSC_TRACE(PROBE, "MAC Address specified by platform data"); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2064 | } else { |
| 2065 | /* Try reading mac address from device. if EEPROM is present |
| 2066 | * it will already have been set */ |
Steve Glendinning | 31f4574 | 2009-01-27 06:51:12 +0000 | [diff] [blame] | 2067 | smsc911x_read_mac_address(dev); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2068 | |
| 2069 | if (is_valid_ether_addr(dev->dev_addr)) { |
| 2070 | /* eeprom values are valid so use them */ |
| 2071 | SMSC_TRACE(PROBE, |
| 2072 | "Mac Address is read from LAN911x EEPROM"); |
| 2073 | } else { |
| 2074 | /* eeprom values are invalid, generate random MAC */ |
| 2075 | random_ether_addr(dev->dev_addr); |
Steve Glendinning | 225ddf4 | 2009-03-19 00:24:46 +0000 | [diff] [blame] | 2076 | smsc911x_set_hw_mac_address(pdata, dev->dev_addr); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2077 | SMSC_TRACE(PROBE, |
| 2078 | "MAC Address is set to random_ether_addr"); |
| 2079 | } |
| 2080 | } |
| 2081 | |
| 2082 | spin_unlock_irq(&pdata->mac_lock); |
| 2083 | |
Steve Glendinning | 63a2ebb | 2009-03-19 00:24:45 +0000 | [diff] [blame] | 2084 | dev_info(&dev->dev, "MAC Address: %pM\n", dev->dev_addr); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2085 | |
| 2086 | return 0; |
| 2087 | |
| 2088 | out_unregister_netdev_5: |
| 2089 | unregister_netdev(dev); |
| 2090 | out_unset_drvdata_4: |
| 2091 | platform_set_drvdata(pdev, NULL); |
| 2092 | free_irq(dev->irq, dev); |
| 2093 | out_unmap_io_3: |
| 2094 | iounmap(pdata->ioaddr); |
| 2095 | out_free_netdev_2: |
| 2096 | free_netdev(dev); |
| 2097 | out_release_io_1: |
Julia Lawall | 3942453 | 2009-07-04 11:31:47 +0000 | [diff] [blame] | 2098 | release_mem_region(res->start, resource_size(res)); |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2099 | out_0: |
| 2100 | return retval; |
| 2101 | } |
| 2102 | |
Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2103 | #ifdef CONFIG_PM |
| 2104 | /* This implementation assumes the devices remains powered on its VDDVARIO |
| 2105 | * pins during suspend. */ |
| 2106 | |
Daniel Mack | 6cb8782 | 2009-08-05 08:29:31 +0000 | [diff] [blame] | 2107 | /* TODO: implement freeze/thaw callbacks for hibernation.*/ |
| 2108 | |
| 2109 | static int smsc911x_suspend(struct device *dev) |
Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2110 | { |
Daniel Mack | 6cb8782 | 2009-08-05 08:29:31 +0000 | [diff] [blame] | 2111 | struct net_device *ndev = dev_get_drvdata(dev); |
| 2112 | struct smsc911x_data *pdata = netdev_priv(ndev); |
Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2113 | |
| 2114 | /* enable wake on LAN, energy detection and the external PME |
| 2115 | * signal. */ |
| 2116 | smsc911x_reg_write(pdata, PMT_CTRL, |
| 2117 | PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ | |
| 2118 | PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_); |
| 2119 | |
| 2120 | return 0; |
| 2121 | } |
| 2122 | |
Daniel Mack | 6cb8782 | 2009-08-05 08:29:31 +0000 | [diff] [blame] | 2123 | static int smsc911x_resume(struct device *dev) |
Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2124 | { |
Daniel Mack | 6cb8782 | 2009-08-05 08:29:31 +0000 | [diff] [blame] | 2125 | struct net_device *ndev = dev_get_drvdata(dev); |
| 2126 | struct smsc911x_data *pdata = netdev_priv(ndev); |
Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2127 | unsigned int to = 100; |
| 2128 | |
| 2129 | /* Note 3.11 from the datasheet: |
| 2130 | * "When the LAN9220 is in a power saving state, a write of any |
| 2131 | * data to the BYTE_TEST register will wake-up the device." |
| 2132 | */ |
| 2133 | smsc911x_reg_write(pdata, BYTE_TEST, 0); |
| 2134 | |
| 2135 | /* poll the READY bit in PMT_CTRL. Any other access to the device is |
| 2136 | * forbidden while this bit isn't set. Try for 100ms and return -EIO |
| 2137 | * if it failed. */ |
| 2138 | while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) |
| 2139 | udelay(1000); |
| 2140 | |
| 2141 | return (to == 0) ? -EIO : 0; |
| 2142 | } |
| 2143 | |
Alexey Dobriyan | 4714521 | 2009-12-14 18:00:08 -0800 | [diff] [blame] | 2144 | static const struct dev_pm_ops smsc911x_pm_ops = { |
Daniel Mack | 6cb8782 | 2009-08-05 08:29:31 +0000 | [diff] [blame] | 2145 | .suspend = smsc911x_suspend, |
| 2146 | .resume = smsc911x_resume, |
| 2147 | }; |
| 2148 | |
| 2149 | #define SMSC911X_PM_OPS (&smsc911x_pm_ops) |
| 2150 | |
Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2151 | #else |
Daniel Mack | 6cb8782 | 2009-08-05 08:29:31 +0000 | [diff] [blame] | 2152 | #define SMSC911X_PM_OPS NULL |
Daniel Mack | b6907b0 | 2009-05-05 12:22:53 -0700 | [diff] [blame] | 2153 | #endif |
| 2154 | |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2155 | static struct platform_driver smsc911x_driver = { |
| 2156 | .probe = smsc911x_drv_probe, |
Mike Frysinger | df911e2 | 2009-06-05 14:37:20 +0000 | [diff] [blame] | 2157 | .remove = __devexit_p(smsc911x_drv_remove), |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2158 | .driver = { |
Daniel Mack | 6cb8782 | 2009-08-05 08:29:31 +0000 | [diff] [blame] | 2159 | .name = SMSC_CHIPNAME, |
| 2160 | .owner = THIS_MODULE, |
| 2161 | .pm = SMSC911X_PM_OPS, |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2162 | }, |
Steve Glendinning | fd9abb3 | 2008-11-05 00:35:37 +0000 | [diff] [blame] | 2163 | }; |
| 2164 | |
| 2165 | /* Entry point for loading the module */ |
| 2166 | static int __init smsc911x_init_module(void) |
| 2167 | { |
| 2168 | return platform_driver_register(&smsc911x_driver); |
| 2169 | } |
| 2170 | |
| 2171 | /* entry point for unloading the module */ |
| 2172 | static void __exit smsc911x_cleanup_module(void) |
| 2173 | { |
| 2174 | platform_driver_unregister(&smsc911x_driver); |
| 2175 | } |
| 2176 | |
| 2177 | module_init(smsc911x_init_module); |
| 2178 | module_exit(smsc911x_cleanup_module); |