Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/usb/gadget/s3c2410_udc.c |
| 3 | * |
| 4 | * Samsung S3C24xx series on-chip full speed USB device controllers |
| 5 | * |
Al Viro | d36b691 | 2011-12-29 17:09:01 -0500 | [diff] [blame] | 6 | * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 7 | * Additional cleanups by Ben Dooks <ben-linux@fluff.org> |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License as published by |
| 11 | * the Free Software Foundation; either version 2 of the License, or |
| 12 | * (at your option) any later version. |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 13 | */ |
| 14 | |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/kernel.h> |
| 17 | #include <linux/delay.h> |
| 18 | #include <linux/ioport.h> |
| 19 | #include <linux/sched.h> |
| 20 | #include <linux/slab.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 21 | #include <linux/errno.h> |
| 22 | #include <linux/init.h> |
| 23 | #include <linux/timer.h> |
| 24 | #include <linux/list.h> |
| 25 | #include <linux/interrupt.h> |
| 26 | #include <linux/platform_device.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 27 | #include <linux/clk.h> |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 28 | #include <linux/gpio.h> |
Bryan Wu | b38b03b | 2011-06-02 12:51:29 +0800 | [diff] [blame] | 29 | #include <linux/prefetch.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 30 | |
| 31 | #include <linux/debugfs.h> |
| 32 | #include <linux/seq_file.h> |
| 33 | |
| 34 | #include <linux/usb.h> |
David Brownell | 9454a57 | 2007-10-04 18:05:17 -0700 | [diff] [blame] | 35 | #include <linux/usb/gadget.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 36 | |
| 37 | #include <asm/byteorder.h> |
| 38 | #include <asm/io.h> |
| 39 | #include <asm/irq.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 40 | #include <asm/unaligned.h> |
Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 41 | #include <mach/irqs.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 42 | |
Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 43 | #include <mach/hardware.h> |
Ben Dooks | 899d566 | 2007-11-19 22:28:13 +0000 | [diff] [blame] | 44 | |
Ben Dooks | 57bd4b9 | 2008-10-30 10:14:37 +0000 | [diff] [blame] | 45 | #include <plat/regs-udc.h> |
| 46 | #include <plat/udc.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 47 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 48 | |
| 49 | #include "s3c2410_udc.h" |
| 50 | |
| 51 | #define DRIVER_DESC "S3C2410 USB Device Controller Gadget" |
| 52 | #define DRIVER_VERSION "29 Apr 2007" |
Al Viro | d36b691 | 2011-12-29 17:09:01 -0500 | [diff] [blame] | 53 | #define DRIVER_AUTHOR "Herbert Pötzl <herbert@13thfloor.at>, " \ |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 54 | "Arnaud Patard <arnaud.patard@rtp-net.org>" |
| 55 | |
| 56 | static const char gadget_name[] = "s3c2410_udc"; |
| 57 | static const char driver_desc[] = DRIVER_DESC; |
| 58 | |
| 59 | static struct s3c2410_udc *the_controller; |
| 60 | static struct clk *udc_clock; |
| 61 | static struct clk *usb_bus_clock; |
| 62 | static void __iomem *base_addr; |
| 63 | static u64 rsrc_start; |
| 64 | static u64 rsrc_len; |
| 65 | static struct dentry *s3c2410_udc_debugfs_root; |
| 66 | |
| 67 | static inline u32 udc_read(u32 reg) |
| 68 | { |
| 69 | return readb(base_addr + reg); |
| 70 | } |
| 71 | |
| 72 | static inline void udc_write(u32 value, u32 reg) |
| 73 | { |
| 74 | writeb(value, base_addr + reg); |
| 75 | } |
| 76 | |
| 77 | static inline void udc_writeb(void __iomem *base, u32 value, u32 reg) |
| 78 | { |
| 79 | writeb(value, base + reg); |
| 80 | } |
| 81 | |
| 82 | static struct s3c2410_udc_mach_info *udc_info; |
| 83 | |
| 84 | /*************************** DEBUG FUNCTION ***************************/ |
| 85 | #define DEBUG_NORMAL 1 |
| 86 | #define DEBUG_VERBOSE 2 |
| 87 | |
| 88 | #ifdef CONFIG_USB_S3C2410_DEBUG |
| 89 | #define USB_S3C2410_DEBUG_LEVEL 0 |
| 90 | |
| 91 | static uint32_t s3c2410_ticks = 0; |
| 92 | |
| 93 | static int dprintk(int level, const char *fmt, ...) |
| 94 | { |
| 95 | static char printk_buf[1024]; |
| 96 | static long prevticks; |
| 97 | static int invocation; |
| 98 | va_list args; |
| 99 | int len; |
| 100 | |
| 101 | if (level > USB_S3C2410_DEBUG_LEVEL) |
| 102 | return 0; |
| 103 | |
| 104 | if (s3c2410_ticks != prevticks) { |
| 105 | prevticks = s3c2410_ticks; |
| 106 | invocation = 0; |
| 107 | } |
| 108 | |
| 109 | len = scnprintf(printk_buf, |
| 110 | sizeof(printk_buf), "%1lu.%02d USB: ", |
| 111 | prevticks, invocation++); |
| 112 | |
| 113 | va_start(args, fmt); |
| 114 | len = vscnprintf(printk_buf+len, |
| 115 | sizeof(printk_buf)-len, fmt, args); |
| 116 | va_end(args); |
| 117 | |
| 118 | return printk(KERN_DEBUG "%s", printk_buf); |
| 119 | } |
| 120 | #else |
| 121 | static int dprintk(int level, const char *fmt, ...) |
| 122 | { |
| 123 | return 0; |
| 124 | } |
| 125 | #endif |
| 126 | static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) |
| 127 | { |
| 128 | u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg; |
| 129 | u32 ep_int_en_reg, usb_int_en_reg, ep0_csr; |
| 130 | u32 ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2; |
| 131 | u32 ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2; |
| 132 | |
| 133 | addr_reg = udc_read(S3C2410_UDC_FUNC_ADDR_REG); |
| 134 | pwr_reg = udc_read(S3C2410_UDC_PWR_REG); |
| 135 | ep_int_reg = udc_read(S3C2410_UDC_EP_INT_REG); |
| 136 | usb_int_reg = udc_read(S3C2410_UDC_USB_INT_REG); |
| 137 | ep_int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); |
| 138 | usb_int_en_reg = udc_read(S3C2410_UDC_USB_INT_EN_REG); |
| 139 | udc_write(0, S3C2410_UDC_INDEX_REG); |
| 140 | ep0_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 141 | udc_write(1, S3C2410_UDC_INDEX_REG); |
| 142 | ep1_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 143 | ep1_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| 144 | ep1_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 145 | ep1_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| 146 | udc_write(2, S3C2410_UDC_INDEX_REG); |
| 147 | ep2_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 148 | ep2_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| 149 | ep2_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 150 | ep2_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| 151 | |
| 152 | seq_printf(m, "FUNC_ADDR_REG : 0x%04X\n" |
| 153 | "PWR_REG : 0x%04X\n" |
| 154 | "EP_INT_REG : 0x%04X\n" |
| 155 | "USB_INT_REG : 0x%04X\n" |
| 156 | "EP_INT_EN_REG : 0x%04X\n" |
| 157 | "USB_INT_EN_REG : 0x%04X\n" |
| 158 | "EP0_CSR : 0x%04X\n" |
| 159 | "EP1_I_CSR1 : 0x%04X\n" |
| 160 | "EP1_I_CSR2 : 0x%04X\n" |
| 161 | "EP1_O_CSR1 : 0x%04X\n" |
| 162 | "EP1_O_CSR2 : 0x%04X\n" |
| 163 | "EP2_I_CSR1 : 0x%04X\n" |
| 164 | "EP2_I_CSR2 : 0x%04X\n" |
| 165 | "EP2_O_CSR1 : 0x%04X\n" |
| 166 | "EP2_O_CSR2 : 0x%04X\n", |
| 167 | addr_reg,pwr_reg,ep_int_reg,usb_int_reg, |
| 168 | ep_int_en_reg, usb_int_en_reg, ep0_csr, |
| 169 | ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2, |
| 170 | ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2 |
| 171 | ); |
| 172 | |
| 173 | return 0; |
| 174 | } |
| 175 | |
| 176 | static int s3c2410_udc_debugfs_fops_open(struct inode *inode, |
| 177 | struct file *file) |
| 178 | { |
| 179 | return single_open(file, s3c2410_udc_debugfs_seq_show, NULL); |
| 180 | } |
| 181 | |
| 182 | static const struct file_operations s3c2410_udc_debugfs_fops = { |
| 183 | .open = s3c2410_udc_debugfs_fops_open, |
| 184 | .read = seq_read, |
| 185 | .llseek = seq_lseek, |
| 186 | .release = single_release, |
| 187 | .owner = THIS_MODULE, |
| 188 | }; |
| 189 | |
| 190 | /* io macros */ |
| 191 | |
| 192 | static inline void s3c2410_udc_clear_ep0_opr(void __iomem *base) |
| 193 | { |
| 194 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 195 | udc_writeb(base, S3C2410_UDC_EP0_CSR_SOPKTRDY, |
| 196 | S3C2410_UDC_EP0_CSR_REG); |
| 197 | } |
| 198 | |
| 199 | static inline void s3c2410_udc_clear_ep0_sst(void __iomem *base) |
| 200 | { |
| 201 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 202 | writeb(0x00, base + S3C2410_UDC_EP0_CSR_REG); |
| 203 | } |
| 204 | |
| 205 | static inline void s3c2410_udc_clear_ep0_se(void __iomem *base) |
| 206 | { |
| 207 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 208 | udc_writeb(base, S3C2410_UDC_EP0_CSR_SSE, S3C2410_UDC_EP0_CSR_REG); |
| 209 | } |
| 210 | |
| 211 | static inline void s3c2410_udc_set_ep0_ipr(void __iomem *base) |
| 212 | { |
| 213 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 214 | udc_writeb(base, S3C2410_UDC_EP0_CSR_IPKRDY, S3C2410_UDC_EP0_CSR_REG); |
| 215 | } |
| 216 | |
| 217 | static inline void s3c2410_udc_set_ep0_de(void __iomem *base) |
| 218 | { |
| 219 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 220 | udc_writeb(base, S3C2410_UDC_EP0_CSR_DE, S3C2410_UDC_EP0_CSR_REG); |
| 221 | } |
| 222 | |
| 223 | inline void s3c2410_udc_set_ep0_ss(void __iomem *b) |
| 224 | { |
| 225 | udc_writeb(b, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 226 | udc_writeb(b, S3C2410_UDC_EP0_CSR_SENDSTL, S3C2410_UDC_EP0_CSR_REG); |
| 227 | } |
| 228 | |
| 229 | static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base) |
| 230 | { |
| 231 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 232 | |
| 233 | udc_writeb(base,(S3C2410_UDC_EP0_CSR_SOPKTRDY |
| 234 | | S3C2410_UDC_EP0_CSR_DE), |
| 235 | S3C2410_UDC_EP0_CSR_REG); |
| 236 | } |
| 237 | |
| 238 | static inline void s3c2410_udc_set_ep0_sse_out(void __iomem *base) |
| 239 | { |
| 240 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 241 | udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY |
| 242 | | S3C2410_UDC_EP0_CSR_SSE), |
| 243 | S3C2410_UDC_EP0_CSR_REG); |
| 244 | } |
| 245 | |
| 246 | static inline void s3c2410_udc_set_ep0_de_in(void __iomem *base) |
| 247 | { |
| 248 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 249 | udc_writeb(base, (S3C2410_UDC_EP0_CSR_IPKRDY |
| 250 | | S3C2410_UDC_EP0_CSR_DE), |
| 251 | S3C2410_UDC_EP0_CSR_REG); |
| 252 | } |
| 253 | |
| 254 | /*------------------------- I/O ----------------------------------*/ |
| 255 | |
| 256 | /* |
| 257 | * s3c2410_udc_done |
| 258 | */ |
| 259 | static void s3c2410_udc_done(struct s3c2410_ep *ep, |
| 260 | struct s3c2410_request *req, int status) |
| 261 | { |
| 262 | unsigned halted = ep->halted; |
| 263 | |
| 264 | list_del_init(&req->queue); |
| 265 | |
| 266 | if (likely (req->req.status == -EINPROGRESS)) |
| 267 | req->req.status = status; |
| 268 | else |
| 269 | status = req->req.status; |
| 270 | |
| 271 | ep->halted = 1; |
| 272 | req->req.complete(&ep->ep, &req->req); |
| 273 | ep->halted = halted; |
| 274 | } |
| 275 | |
| 276 | static void s3c2410_udc_nuke(struct s3c2410_udc *udc, |
| 277 | struct s3c2410_ep *ep, int status) |
| 278 | { |
| 279 | /* Sanity check */ |
| 280 | if (&ep->queue == NULL) |
| 281 | return; |
| 282 | |
| 283 | while (!list_empty (&ep->queue)) { |
| 284 | struct s3c2410_request *req; |
| 285 | req = list_entry (ep->queue.next, struct s3c2410_request, |
| 286 | queue); |
| 287 | s3c2410_udc_done(ep, req, status); |
| 288 | } |
| 289 | } |
| 290 | |
| 291 | static inline void s3c2410_udc_clear_ep_state(struct s3c2410_udc *dev) |
| 292 | { |
| 293 | unsigned i; |
| 294 | |
| 295 | /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint |
| 296 | * fifos, and pending transactions mustn't be continued in any case. |
| 297 | */ |
| 298 | |
| 299 | for (i = 1; i < S3C2410_ENDPOINTS; i++) |
| 300 | s3c2410_udc_nuke(dev, &dev->ep[i], -ECONNABORTED); |
| 301 | } |
| 302 | |
| 303 | static inline int s3c2410_udc_fifo_count_out(void) |
| 304 | { |
| 305 | int tmp; |
| 306 | |
| 307 | tmp = udc_read(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8; |
| 308 | tmp |= udc_read(S3C2410_UDC_OUT_FIFO_CNT1_REG); |
| 309 | return tmp; |
| 310 | } |
| 311 | |
| 312 | /* |
| 313 | * s3c2410_udc_write_packet |
| 314 | */ |
| 315 | static inline int s3c2410_udc_write_packet(int fifo, |
| 316 | struct s3c2410_request *req, |
| 317 | unsigned max) |
| 318 | { |
| 319 | unsigned len = min(req->req.length - req->req.actual, max); |
| 320 | u8 *buf = req->req.buf + req->req.actual; |
| 321 | |
| 322 | prefetch(buf); |
| 323 | |
| 324 | dprintk(DEBUG_VERBOSE, "%s %d %d %d %d\n", __func__, |
| 325 | req->req.actual, req->req.length, len, req->req.actual + len); |
| 326 | |
| 327 | req->req.actual += len; |
| 328 | |
| 329 | udelay(5); |
| 330 | writesb(base_addr + fifo, buf, len); |
| 331 | return len; |
| 332 | } |
| 333 | |
| 334 | /* |
| 335 | * s3c2410_udc_write_fifo |
| 336 | * |
| 337 | * return: 0 = still running, 1 = completed, negative = errno |
| 338 | */ |
| 339 | static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep, |
| 340 | struct s3c2410_request *req) |
| 341 | { |
| 342 | unsigned count; |
| 343 | int is_last; |
| 344 | u32 idx; |
| 345 | int fifo_reg; |
| 346 | u32 ep_csr; |
| 347 | |
| 348 | idx = ep->bEndpointAddress & 0x7F; |
| 349 | switch (idx) { |
| 350 | default: |
| 351 | idx = 0; |
| 352 | case 0: |
| 353 | fifo_reg = S3C2410_UDC_EP0_FIFO_REG; |
| 354 | break; |
| 355 | case 1: |
| 356 | fifo_reg = S3C2410_UDC_EP1_FIFO_REG; |
| 357 | break; |
| 358 | case 2: |
| 359 | fifo_reg = S3C2410_UDC_EP2_FIFO_REG; |
| 360 | break; |
| 361 | case 3: |
| 362 | fifo_reg = S3C2410_UDC_EP3_FIFO_REG; |
| 363 | break; |
| 364 | case 4: |
| 365 | fifo_reg = S3C2410_UDC_EP4_FIFO_REG; |
| 366 | break; |
| 367 | } |
| 368 | |
| 369 | count = s3c2410_udc_write_packet(fifo_reg, req, ep->ep.maxpacket); |
| 370 | |
| 371 | /* last packet is often short (sometimes a zlp) */ |
| 372 | if (count != ep->ep.maxpacket) |
| 373 | is_last = 1; |
| 374 | else if (req->req.length != req->req.actual || req->req.zero) |
| 375 | is_last = 0; |
| 376 | else |
| 377 | is_last = 2; |
| 378 | |
| 379 | /* Only ep0 debug messages are interesting */ |
| 380 | if (idx == 0) |
| 381 | dprintk(DEBUG_NORMAL, |
| 382 | "Written ep%d %d.%d of %d b [last %d,z %d]\n", |
| 383 | idx, count, req->req.actual, req->req.length, |
| 384 | is_last, req->req.zero); |
| 385 | |
| 386 | if (is_last) { |
| 387 | /* The order is important. It prevents sending 2 packets |
| 388 | * at the same time */ |
| 389 | |
| 390 | if (idx == 0) { |
| 391 | /* Reset signal => no need to say 'data sent' */ |
| 392 | if (! (udc_read(S3C2410_UDC_USB_INT_REG) |
| 393 | & S3C2410_UDC_USBINT_RESET)) |
| 394 | s3c2410_udc_set_ep0_de_in(base_addr); |
| 395 | ep->dev->ep0state=EP0_IDLE; |
| 396 | } else { |
| 397 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 398 | ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 399 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 400 | udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY, |
| 401 | S3C2410_UDC_IN_CSR1_REG); |
| 402 | } |
| 403 | |
| 404 | s3c2410_udc_done(ep, req, 0); |
| 405 | is_last = 1; |
| 406 | } else { |
| 407 | if (idx == 0) { |
| 408 | /* Reset signal => no need to say 'data sent' */ |
| 409 | if (! (udc_read(S3C2410_UDC_USB_INT_REG) |
| 410 | & S3C2410_UDC_USBINT_RESET)) |
| 411 | s3c2410_udc_set_ep0_ipr(base_addr); |
| 412 | } else { |
| 413 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 414 | ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 415 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 416 | udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY, |
| 417 | S3C2410_UDC_IN_CSR1_REG); |
| 418 | } |
| 419 | } |
| 420 | |
| 421 | return is_last; |
| 422 | } |
| 423 | |
| 424 | static inline int s3c2410_udc_read_packet(int fifo, u8 *buf, |
| 425 | struct s3c2410_request *req, unsigned avail) |
| 426 | { |
| 427 | unsigned len; |
| 428 | |
| 429 | len = min(req->req.length - req->req.actual, avail); |
| 430 | req->req.actual += len; |
| 431 | |
| 432 | readsb(fifo + base_addr, buf, len); |
| 433 | return len; |
| 434 | } |
| 435 | |
| 436 | /* |
| 437 | * return: 0 = still running, 1 = queue empty, negative = errno |
| 438 | */ |
| 439 | static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, |
| 440 | struct s3c2410_request *req) |
| 441 | { |
| 442 | u8 *buf; |
| 443 | u32 ep_csr; |
| 444 | unsigned bufferspace; |
| 445 | int is_last=1; |
| 446 | unsigned avail; |
| 447 | int fifo_count = 0; |
| 448 | u32 idx; |
| 449 | int fifo_reg; |
| 450 | |
| 451 | idx = ep->bEndpointAddress & 0x7F; |
| 452 | |
| 453 | switch (idx) { |
| 454 | default: |
| 455 | idx = 0; |
| 456 | case 0: |
| 457 | fifo_reg = S3C2410_UDC_EP0_FIFO_REG; |
| 458 | break; |
| 459 | case 1: |
| 460 | fifo_reg = S3C2410_UDC_EP1_FIFO_REG; |
| 461 | break; |
| 462 | case 2: |
| 463 | fifo_reg = S3C2410_UDC_EP2_FIFO_REG; |
| 464 | break; |
| 465 | case 3: |
| 466 | fifo_reg = S3C2410_UDC_EP3_FIFO_REG; |
| 467 | break; |
| 468 | case 4: |
| 469 | fifo_reg = S3C2410_UDC_EP4_FIFO_REG; |
| 470 | break; |
| 471 | } |
| 472 | |
| 473 | if (!req->req.length) |
| 474 | return 1; |
| 475 | |
| 476 | buf = req->req.buf + req->req.actual; |
| 477 | bufferspace = req->req.length - req->req.actual; |
| 478 | if (!bufferspace) { |
| 479 | dprintk(DEBUG_NORMAL, "%s: buffer full!\n", __func__); |
| 480 | return -1; |
| 481 | } |
| 482 | |
| 483 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 484 | |
| 485 | fifo_count = s3c2410_udc_fifo_count_out(); |
| 486 | dprintk(DEBUG_NORMAL, "%s fifo count : %d\n", __func__, fifo_count); |
| 487 | |
| 488 | if (fifo_count > ep->ep.maxpacket) |
| 489 | avail = ep->ep.maxpacket; |
| 490 | else |
| 491 | avail = fifo_count; |
| 492 | |
| 493 | fifo_count = s3c2410_udc_read_packet(fifo_reg, buf, req, avail); |
| 494 | |
| 495 | /* checking this with ep0 is not accurate as we already |
| 496 | * read a control request |
| 497 | **/ |
| 498 | if (idx != 0 && fifo_count < ep->ep.maxpacket) { |
| 499 | is_last = 1; |
| 500 | /* overflowed this request? flush extra data */ |
| 501 | if (fifo_count != avail) |
| 502 | req->req.status = -EOVERFLOW; |
| 503 | } else { |
| 504 | is_last = (req->req.length <= req->req.actual) ? 1 : 0; |
| 505 | } |
| 506 | |
| 507 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 508 | fifo_count = s3c2410_udc_fifo_count_out(); |
| 509 | |
| 510 | /* Only ep0 debug messages are interesting */ |
| 511 | if (idx == 0) |
| 512 | dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n", |
| 513 | __func__, fifo_count,is_last); |
| 514 | |
| 515 | if (is_last) { |
| 516 | if (idx == 0) { |
| 517 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 518 | ep->dev->ep0state = EP0_IDLE; |
| 519 | } else { |
| 520 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 521 | ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| 522 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 523 | udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY, |
| 524 | S3C2410_UDC_OUT_CSR1_REG); |
| 525 | } |
| 526 | |
| 527 | s3c2410_udc_done(ep, req, 0); |
| 528 | } else { |
| 529 | if (idx == 0) { |
| 530 | s3c2410_udc_clear_ep0_opr(base_addr); |
| 531 | } else { |
| 532 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 533 | ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| 534 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 535 | udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY, |
| 536 | S3C2410_UDC_OUT_CSR1_REG); |
| 537 | } |
| 538 | } |
| 539 | |
| 540 | return is_last; |
| 541 | } |
| 542 | |
| 543 | static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq) |
| 544 | { |
| 545 | unsigned char *outbuf = (unsigned char*)crq; |
| 546 | int bytes_read = 0; |
| 547 | |
| 548 | udc_write(0, S3C2410_UDC_INDEX_REG); |
| 549 | |
| 550 | bytes_read = s3c2410_udc_fifo_count_out(); |
| 551 | |
| 552 | dprintk(DEBUG_NORMAL, "%s: fifo_count=%d\n", __func__, bytes_read); |
| 553 | |
| 554 | if (bytes_read > sizeof(struct usb_ctrlrequest)) |
| 555 | bytes_read = sizeof(struct usb_ctrlrequest); |
| 556 | |
| 557 | readsb(S3C2410_UDC_EP0_FIFO_REG + base_addr, outbuf, bytes_read); |
| 558 | |
| 559 | dprintk(DEBUG_VERBOSE, "%s: len=%d %02x:%02x {%x,%x,%x}\n", __func__, |
| 560 | bytes_read, crq->bRequest, crq->bRequestType, |
| 561 | crq->wValue, crq->wIndex, crq->wLength); |
| 562 | |
| 563 | return bytes_read; |
| 564 | } |
| 565 | |
| 566 | static int s3c2410_udc_get_status(struct s3c2410_udc *dev, |
| 567 | struct usb_ctrlrequest *crq) |
| 568 | { |
| 569 | u16 status = 0; |
| 570 | u8 ep_num = crq->wIndex & 0x7F; |
| 571 | u8 is_in = crq->wIndex & USB_DIR_IN; |
| 572 | |
| 573 | switch (crq->bRequestType & USB_RECIP_MASK) { |
| 574 | case USB_RECIP_INTERFACE: |
| 575 | break; |
| 576 | |
| 577 | case USB_RECIP_DEVICE: |
| 578 | status = dev->devstatus; |
| 579 | break; |
| 580 | |
| 581 | case USB_RECIP_ENDPOINT: |
| 582 | if (ep_num > 4 || crq->wLength > 2) |
| 583 | return 1; |
| 584 | |
| 585 | if (ep_num == 0) { |
| 586 | udc_write(0, S3C2410_UDC_INDEX_REG); |
| 587 | status = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 588 | status = status & S3C2410_UDC_EP0_CSR_SENDSTL; |
| 589 | } else { |
| 590 | udc_write(ep_num, S3C2410_UDC_INDEX_REG); |
| 591 | if (is_in) { |
| 592 | status = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 593 | status = status & S3C2410_UDC_ICSR1_SENDSTL; |
| 594 | } else { |
| 595 | status = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| 596 | status = status & S3C2410_UDC_OCSR1_SENDSTL; |
| 597 | } |
| 598 | } |
| 599 | |
| 600 | status = status ? 1 : 0; |
| 601 | break; |
| 602 | |
| 603 | default: |
| 604 | return 1; |
| 605 | } |
| 606 | |
| 607 | /* Seems to be needed to get it working. ouch :( */ |
| 608 | udelay(5); |
| 609 | udc_write(status & 0xFF, S3C2410_UDC_EP0_FIFO_REG); |
| 610 | udc_write(status >> 8, S3C2410_UDC_EP0_FIFO_REG); |
| 611 | s3c2410_udc_set_ep0_de_in(base_addr); |
| 612 | |
| 613 | return 0; |
| 614 | } |
| 615 | /*------------------------- usb state machine -------------------------------*/ |
| 616 | static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value); |
| 617 | |
| 618 | static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, |
| 619 | struct s3c2410_ep *ep, |
| 620 | struct usb_ctrlrequest *crq, |
| 621 | u32 ep0csr) |
| 622 | { |
| 623 | int len, ret, tmp; |
| 624 | |
| 625 | /* start control request? */ |
| 626 | if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY)) |
| 627 | return; |
| 628 | |
| 629 | s3c2410_udc_nuke(dev, ep, -EPROTO); |
| 630 | |
| 631 | len = s3c2410_udc_read_fifo_crq(crq); |
| 632 | if (len != sizeof(*crq)) { |
| 633 | dprintk(DEBUG_NORMAL, "setup begin: fifo READ ERROR" |
| 634 | " wanted %d bytes got %d. Stalling out...\n", |
| 635 | sizeof(*crq), len); |
| 636 | s3c2410_udc_set_ep0_ss(base_addr); |
| 637 | return; |
| 638 | } |
| 639 | |
| 640 | dprintk(DEBUG_NORMAL, "bRequest = %d bRequestType %d wLength = %d\n", |
| 641 | crq->bRequest, crq->bRequestType, crq->wLength); |
| 642 | |
| 643 | /* cope with automagic for some standard requests. */ |
| 644 | dev->req_std = (crq->bRequestType & USB_TYPE_MASK) |
| 645 | == USB_TYPE_STANDARD; |
| 646 | dev->req_config = 0; |
| 647 | dev->req_pending = 1; |
| 648 | |
| 649 | switch (crq->bRequest) { |
| 650 | case USB_REQ_SET_CONFIGURATION: |
| 651 | dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ... \n"); |
| 652 | |
| 653 | if (crq->bRequestType == USB_RECIP_DEVICE) { |
| 654 | dev->req_config = 1; |
| 655 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 656 | } |
| 657 | break; |
| 658 | |
| 659 | case USB_REQ_SET_INTERFACE: |
| 660 | dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ... \n"); |
| 661 | |
| 662 | if (crq->bRequestType == USB_RECIP_INTERFACE) { |
| 663 | dev->req_config = 1; |
| 664 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 665 | } |
| 666 | break; |
| 667 | |
| 668 | case USB_REQ_SET_ADDRESS: |
| 669 | dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ... \n"); |
| 670 | |
| 671 | if (crq->bRequestType == USB_RECIP_DEVICE) { |
| 672 | tmp = crq->wValue & 0x7F; |
| 673 | dev->address = tmp; |
| 674 | udc_write((tmp | S3C2410_UDC_FUNCADDR_UPDATE), |
| 675 | S3C2410_UDC_FUNC_ADDR_REG); |
| 676 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 677 | return; |
| 678 | } |
| 679 | break; |
| 680 | |
| 681 | case USB_REQ_GET_STATUS: |
| 682 | dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ... \n"); |
| 683 | s3c2410_udc_clear_ep0_opr(base_addr); |
| 684 | |
| 685 | if (dev->req_std) { |
| 686 | if (!s3c2410_udc_get_status(dev, crq)) { |
| 687 | return; |
| 688 | } |
| 689 | } |
| 690 | break; |
| 691 | |
| 692 | case USB_REQ_CLEAR_FEATURE: |
| 693 | s3c2410_udc_clear_ep0_opr(base_addr); |
| 694 | |
| 695 | if (crq->bRequestType != USB_RECIP_ENDPOINT) |
| 696 | break; |
| 697 | |
| 698 | if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0) |
| 699 | break; |
| 700 | |
| 701 | s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 0); |
| 702 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 703 | return; |
| 704 | |
| 705 | case USB_REQ_SET_FEATURE: |
| 706 | s3c2410_udc_clear_ep0_opr(base_addr); |
| 707 | |
| 708 | if (crq->bRequestType != USB_RECIP_ENDPOINT) |
| 709 | break; |
| 710 | |
| 711 | if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0) |
| 712 | break; |
| 713 | |
| 714 | s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 1); |
| 715 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 716 | return; |
| 717 | |
| 718 | default: |
| 719 | s3c2410_udc_clear_ep0_opr(base_addr); |
| 720 | break; |
| 721 | } |
| 722 | |
| 723 | if (crq->bRequestType & USB_DIR_IN) |
| 724 | dev->ep0state = EP0_IN_DATA_PHASE; |
| 725 | else |
| 726 | dev->ep0state = EP0_OUT_DATA_PHASE; |
| 727 | |
Vladimir Zapolskiy | 00c05aa | 2010-06-29 23:36:26 +0400 | [diff] [blame] | 728 | if (!dev->driver) |
| 729 | return; |
| 730 | |
| 731 | /* deliver the request to the gadget driver */ |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 732 | ret = dev->driver->setup(&dev->gadget, crq); |
| 733 | if (ret < 0) { |
| 734 | if (dev->req_config) { |
| 735 | dprintk(DEBUG_NORMAL, "config change %02x fail %d?\n", |
| 736 | crq->bRequest, ret); |
| 737 | return; |
| 738 | } |
| 739 | |
| 740 | if (ret == -EOPNOTSUPP) |
| 741 | dprintk(DEBUG_NORMAL, "Operation not supported\n"); |
| 742 | else |
| 743 | dprintk(DEBUG_NORMAL, |
| 744 | "dev->driver->setup failed. (%d)\n", ret); |
| 745 | |
| 746 | udelay(5); |
| 747 | s3c2410_udc_set_ep0_ss(base_addr); |
| 748 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 749 | dev->ep0state = EP0_IDLE; |
| 750 | /* deferred i/o == no response yet */ |
| 751 | } else if (dev->req_pending) { |
| 752 | dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n"); |
| 753 | dev->req_pending=0; |
| 754 | } |
| 755 | |
| 756 | dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]); |
| 757 | } |
| 758 | |
| 759 | static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev) |
| 760 | { |
| 761 | u32 ep0csr; |
| 762 | struct s3c2410_ep *ep = &dev->ep[0]; |
| 763 | struct s3c2410_request *req; |
| 764 | struct usb_ctrlrequest crq; |
| 765 | |
| 766 | if (list_empty(&ep->queue)) |
| 767 | req = NULL; |
| 768 | else |
| 769 | req = list_entry(ep->queue.next, struct s3c2410_request, queue); |
| 770 | |
| 771 | /* We make the assumption that S3C2410_UDC_IN_CSR1_REG equal to |
| 772 | * S3C2410_UDC_EP0_CSR_REG when index is zero */ |
| 773 | |
| 774 | udc_write(0, S3C2410_UDC_INDEX_REG); |
| 775 | ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 776 | |
| 777 | dprintk(DEBUG_NORMAL, "ep0csr %x ep0state %s\n", |
| 778 | ep0csr, ep0states[dev->ep0state]); |
| 779 | |
| 780 | /* clear stall status */ |
| 781 | if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) { |
| 782 | s3c2410_udc_nuke(dev, ep, -EPIPE); |
| 783 | dprintk(DEBUG_NORMAL, "... clear SENT_STALL ...\n"); |
| 784 | s3c2410_udc_clear_ep0_sst(base_addr); |
| 785 | dev->ep0state = EP0_IDLE; |
| 786 | return; |
| 787 | } |
| 788 | |
| 789 | /* clear setup end */ |
| 790 | if (ep0csr & S3C2410_UDC_EP0_CSR_SE) { |
| 791 | dprintk(DEBUG_NORMAL, "... serviced SETUP_END ...\n"); |
| 792 | s3c2410_udc_nuke(dev, ep, 0); |
| 793 | s3c2410_udc_clear_ep0_se(base_addr); |
| 794 | dev->ep0state = EP0_IDLE; |
| 795 | } |
| 796 | |
| 797 | switch (dev->ep0state) { |
| 798 | case EP0_IDLE: |
| 799 | s3c2410_udc_handle_ep0_idle(dev, ep, &crq, ep0csr); |
| 800 | break; |
| 801 | |
| 802 | case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ |
| 803 | dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n"); |
| 804 | if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) { |
| 805 | s3c2410_udc_write_fifo(ep, req); |
| 806 | } |
| 807 | break; |
| 808 | |
| 809 | case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ |
| 810 | dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n"); |
| 811 | if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req ) { |
| 812 | s3c2410_udc_read_fifo(ep,req); |
| 813 | } |
| 814 | break; |
| 815 | |
| 816 | case EP0_END_XFER: |
| 817 | dprintk(DEBUG_NORMAL, "EP0_END_XFER ... what now?\n"); |
| 818 | dev->ep0state = EP0_IDLE; |
| 819 | break; |
| 820 | |
| 821 | case EP0_STALL: |
| 822 | dprintk(DEBUG_NORMAL, "EP0_STALL ... what now?\n"); |
| 823 | dev->ep0state = EP0_IDLE; |
| 824 | break; |
| 825 | } |
| 826 | } |
| 827 | |
| 828 | /* |
| 829 | * handle_ep - Manage I/O endpoints |
| 830 | */ |
| 831 | |
| 832 | static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) |
| 833 | { |
| 834 | struct s3c2410_request *req; |
| 835 | int is_in = ep->bEndpointAddress & USB_DIR_IN; |
| 836 | u32 ep_csr1; |
| 837 | u32 idx; |
| 838 | |
| 839 | if (likely (!list_empty(&ep->queue))) |
| 840 | req = list_entry(ep->queue.next, |
| 841 | struct s3c2410_request, queue); |
| 842 | else |
| 843 | req = NULL; |
| 844 | |
| 845 | idx = ep->bEndpointAddress & 0x7F; |
| 846 | |
| 847 | if (is_in) { |
| 848 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 849 | ep_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 850 | dprintk(DEBUG_VERBOSE, "ep%01d write csr:%02x %d\n", |
| 851 | idx, ep_csr1, req ? 1 : 0); |
| 852 | |
| 853 | if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) { |
| 854 | dprintk(DEBUG_VERBOSE, "st\n"); |
| 855 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 856 | udc_write(ep_csr1 & ~S3C2410_UDC_ICSR1_SENTSTL, |
| 857 | S3C2410_UDC_IN_CSR1_REG); |
| 858 | return; |
| 859 | } |
| 860 | |
| 861 | if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) { |
| 862 | s3c2410_udc_write_fifo(ep,req); |
| 863 | } |
| 864 | } else { |
| 865 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 866 | ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| 867 | dprintk(DEBUG_VERBOSE, "ep%01d rd csr:%02x\n", idx, ep_csr1); |
| 868 | |
| 869 | if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) { |
| 870 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 871 | udc_write(ep_csr1 & ~S3C2410_UDC_OCSR1_SENTSTL, |
| 872 | S3C2410_UDC_OUT_CSR1_REG); |
| 873 | return; |
| 874 | } |
| 875 | |
| 876 | if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) { |
| 877 | s3c2410_udc_read_fifo(ep,req); |
| 878 | } |
| 879 | } |
| 880 | } |
| 881 | |
Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 882 | #include <mach/regs-irq.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 883 | |
| 884 | /* |
| 885 | * s3c2410_udc_irq - interrupt handler |
| 886 | */ |
Jeff Garzik | d8d4223 | 2007-11-21 15:13:10 -0800 | [diff] [blame] | 887 | static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev) |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 888 | { |
| 889 | struct s3c2410_udc *dev = _dev; |
| 890 | int usb_status; |
| 891 | int usbd_status; |
| 892 | int pwr_reg; |
| 893 | int ep0csr; |
| 894 | int i; |
Fabian Godehardt | 16f08a0 | 2011-02-07 12:53:05 +0200 | [diff] [blame] | 895 | u32 idx, idx2; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 896 | unsigned long flags; |
| 897 | |
| 898 | spin_lock_irqsave(&dev->lock, flags); |
| 899 | |
| 900 | /* Driver connected ? */ |
| 901 | if (!dev->driver) { |
| 902 | /* Clear interrupts */ |
| 903 | udc_write(udc_read(S3C2410_UDC_USB_INT_REG), |
| 904 | S3C2410_UDC_USB_INT_REG); |
| 905 | udc_write(udc_read(S3C2410_UDC_EP_INT_REG), |
| 906 | S3C2410_UDC_EP_INT_REG); |
| 907 | } |
| 908 | |
| 909 | /* Save index */ |
| 910 | idx = udc_read(S3C2410_UDC_INDEX_REG); |
| 911 | |
| 912 | /* Read status registers */ |
| 913 | usb_status = udc_read(S3C2410_UDC_USB_INT_REG); |
| 914 | usbd_status = udc_read(S3C2410_UDC_EP_INT_REG); |
| 915 | pwr_reg = udc_read(S3C2410_UDC_PWR_REG); |
| 916 | |
| 917 | udc_writeb(base_addr, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 918 | ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 919 | |
| 920 | dprintk(DEBUG_NORMAL, "usbs=%02x, usbds=%02x, pwr=%02x ep0csr=%02x\n", |
| 921 | usb_status, usbd_status, pwr_reg, ep0csr); |
| 922 | |
| 923 | /* |
| 924 | * Now, handle interrupts. There's two types : |
| 925 | * - Reset, Resume, Suspend coming -> usb_int_reg |
| 926 | * - EP -> ep_int_reg |
| 927 | */ |
| 928 | |
| 929 | /* RESET */ |
| 930 | if (usb_status & S3C2410_UDC_USBINT_RESET) { |
| 931 | /* two kind of reset : |
| 932 | * - reset start -> pwr reg = 8 |
| 933 | * - reset end -> pwr reg = 0 |
| 934 | **/ |
| 935 | dprintk(DEBUG_NORMAL, "USB reset csr %x pwr %x\n", |
| 936 | ep0csr, pwr_reg); |
| 937 | |
| 938 | dev->gadget.speed = USB_SPEED_UNKNOWN; |
| 939 | udc_write(0x00, S3C2410_UDC_INDEX_REG); |
| 940 | udc_write((dev->ep[0].ep.maxpacket & 0x7ff) >> 3, |
| 941 | S3C2410_UDC_MAXP_REG); |
| 942 | dev->address = 0; |
| 943 | |
| 944 | dev->ep0state = EP0_IDLE; |
| 945 | dev->gadget.speed = USB_SPEED_FULL; |
| 946 | |
| 947 | /* clear interrupt */ |
| 948 | udc_write(S3C2410_UDC_USBINT_RESET, |
| 949 | S3C2410_UDC_USB_INT_REG); |
| 950 | |
| 951 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 952 | spin_unlock_irqrestore(&dev->lock, flags); |
| 953 | return IRQ_HANDLED; |
| 954 | } |
| 955 | |
| 956 | /* RESUME */ |
| 957 | if (usb_status & S3C2410_UDC_USBINT_RESUME) { |
| 958 | dprintk(DEBUG_NORMAL, "USB resume\n"); |
| 959 | |
| 960 | /* clear interrupt */ |
| 961 | udc_write(S3C2410_UDC_USBINT_RESUME, |
| 962 | S3C2410_UDC_USB_INT_REG); |
| 963 | |
| 964 | if (dev->gadget.speed != USB_SPEED_UNKNOWN |
| 965 | && dev->driver |
| 966 | && dev->driver->resume) |
| 967 | dev->driver->resume(&dev->gadget); |
| 968 | } |
| 969 | |
| 970 | /* SUSPEND */ |
| 971 | if (usb_status & S3C2410_UDC_USBINT_SUSPEND) { |
| 972 | dprintk(DEBUG_NORMAL, "USB suspend\n"); |
| 973 | |
| 974 | /* clear interrupt */ |
| 975 | udc_write(S3C2410_UDC_USBINT_SUSPEND, |
| 976 | S3C2410_UDC_USB_INT_REG); |
| 977 | |
| 978 | if (dev->gadget.speed != USB_SPEED_UNKNOWN |
| 979 | && dev->driver |
| 980 | && dev->driver->suspend) |
| 981 | dev->driver->suspend(&dev->gadget); |
| 982 | |
| 983 | dev->ep0state = EP0_IDLE; |
| 984 | } |
| 985 | |
| 986 | /* EP */ |
| 987 | /* control traffic */ |
| 988 | /* check on ep0csr != 0 is not a good idea as clearing in_pkt_ready |
| 989 | * generate an interrupt |
| 990 | */ |
| 991 | if (usbd_status & S3C2410_UDC_INT_EP0) { |
| 992 | dprintk(DEBUG_VERBOSE, "USB ep0 irq\n"); |
| 993 | /* Clear the interrupt bit by setting it to 1 */ |
| 994 | udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG); |
| 995 | s3c2410_udc_handle_ep0(dev); |
| 996 | } |
| 997 | |
| 998 | /* endpoint data transfers */ |
| 999 | for (i = 1; i < S3C2410_ENDPOINTS; i++) { |
| 1000 | u32 tmp = 1 << i; |
| 1001 | if (usbd_status & tmp) { |
| 1002 | dprintk(DEBUG_VERBOSE, "USB ep%d irq\n", i); |
| 1003 | |
| 1004 | /* Clear the interrupt bit by setting it to 1 */ |
| 1005 | udc_write(tmp, S3C2410_UDC_EP_INT_REG); |
| 1006 | s3c2410_udc_handle_ep(&dev->ep[i]); |
| 1007 | } |
| 1008 | } |
| 1009 | |
Fabian Godehardt | 16f08a0 | 2011-02-07 12:53:05 +0200 | [diff] [blame] | 1010 | /* what else causes this interrupt? a receive! who is it? */ |
| 1011 | if (!usb_status && !usbd_status && !pwr_reg && !ep0csr) { |
| 1012 | for (i = 1; i < S3C2410_ENDPOINTS; i++) { |
| 1013 | idx2 = udc_read(S3C2410_UDC_INDEX_REG); |
| 1014 | udc_write(i, S3C2410_UDC_INDEX_REG); |
| 1015 | |
| 1016 | if (udc_read(S3C2410_UDC_OUT_CSR1_REG) & 0x1) |
| 1017 | s3c2410_udc_handle_ep(&dev->ep[i]); |
| 1018 | |
| 1019 | /* restore index */ |
| 1020 | udc_write(idx2, S3C2410_UDC_INDEX_REG); |
| 1021 | } |
| 1022 | } |
| 1023 | |
Jeff Garzik | d8d4223 | 2007-11-21 15:13:10 -0800 | [diff] [blame] | 1024 | dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1025 | |
| 1026 | /* Restore old index */ |
| 1027 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 1028 | |
| 1029 | spin_unlock_irqrestore(&dev->lock, flags); |
| 1030 | |
| 1031 | return IRQ_HANDLED; |
| 1032 | } |
| 1033 | /*------------------------- s3c2410_ep_ops ----------------------------------*/ |
| 1034 | |
| 1035 | static inline struct s3c2410_ep *to_s3c2410_ep(struct usb_ep *ep) |
| 1036 | { |
| 1037 | return container_of(ep, struct s3c2410_ep, ep); |
| 1038 | } |
| 1039 | |
| 1040 | static inline struct s3c2410_udc *to_s3c2410_udc(struct usb_gadget *gadget) |
| 1041 | { |
| 1042 | return container_of(gadget, struct s3c2410_udc, gadget); |
| 1043 | } |
| 1044 | |
| 1045 | static inline struct s3c2410_request *to_s3c2410_req(struct usb_request *req) |
| 1046 | { |
| 1047 | return container_of(req, struct s3c2410_request, req); |
| 1048 | } |
| 1049 | |
| 1050 | /* |
| 1051 | * s3c2410_udc_ep_enable |
| 1052 | */ |
| 1053 | static int s3c2410_udc_ep_enable(struct usb_ep *_ep, |
| 1054 | const struct usb_endpoint_descriptor *desc) |
| 1055 | { |
| 1056 | struct s3c2410_udc *dev; |
| 1057 | struct s3c2410_ep *ep; |
| 1058 | u32 max, tmp; |
| 1059 | unsigned long flags; |
| 1060 | u32 csr1,csr2; |
| 1061 | u32 int_en_reg; |
| 1062 | |
| 1063 | ep = to_s3c2410_ep(_ep); |
| 1064 | |
Ido Shayevitz | 0561ed4 | 2012-06-04 13:35:27 +0300 | [diff] [blame] | 1065 | if (!_ep || !desc |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1066 | || _ep->name == ep0name |
| 1067 | || desc->bDescriptorType != USB_DT_ENDPOINT) |
| 1068 | return -EINVAL; |
| 1069 | |
| 1070 | dev = ep->dev; |
| 1071 | if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) |
| 1072 | return -ESHUTDOWN; |
| 1073 | |
Kuninori Morimoto | 29cc889 | 2011-08-23 03:12:03 -0700 | [diff] [blame] | 1074 | max = usb_endpoint_maxp(desc) & 0x1fff; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1075 | |
| 1076 | local_irq_save (flags); |
| 1077 | _ep->maxpacket = max & 0x7ff; |
Ido Shayevitz | fa42e52 | 2012-03-12 20:25:38 +0200 | [diff] [blame] | 1078 | ep->ep.desc = desc; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1079 | ep->halted = 0; |
| 1080 | ep->bEndpointAddress = desc->bEndpointAddress; |
| 1081 | |
| 1082 | /* set max packet */ |
| 1083 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1084 | udc_write(max >> 3, S3C2410_UDC_MAXP_REG); |
| 1085 | |
| 1086 | /* set type, direction, address; reset fifo counters */ |
| 1087 | if (desc->bEndpointAddress & USB_DIR_IN) { |
| 1088 | csr1 = S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT; |
| 1089 | csr2 = S3C2410_UDC_ICSR2_MODEIN|S3C2410_UDC_ICSR2_DMAIEN; |
| 1090 | |
| 1091 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1092 | udc_write(csr1, S3C2410_UDC_IN_CSR1_REG); |
| 1093 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1094 | udc_write(csr2, S3C2410_UDC_IN_CSR2_REG); |
| 1095 | } else { |
| 1096 | /* don't flush in fifo or it will cause endpoint interrupt */ |
| 1097 | csr1 = S3C2410_UDC_ICSR1_CLRDT; |
| 1098 | csr2 = S3C2410_UDC_ICSR2_DMAIEN; |
| 1099 | |
| 1100 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1101 | udc_write(csr1, S3C2410_UDC_IN_CSR1_REG); |
| 1102 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1103 | udc_write(csr2, S3C2410_UDC_IN_CSR2_REG); |
| 1104 | |
| 1105 | csr1 = S3C2410_UDC_OCSR1_FFLUSH | S3C2410_UDC_OCSR1_CLRDT; |
| 1106 | csr2 = S3C2410_UDC_OCSR2_DMAIEN; |
| 1107 | |
| 1108 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1109 | udc_write(csr1, S3C2410_UDC_OUT_CSR1_REG); |
| 1110 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1111 | udc_write(csr2, S3C2410_UDC_OUT_CSR2_REG); |
| 1112 | } |
| 1113 | |
| 1114 | /* enable irqs */ |
| 1115 | int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); |
| 1116 | udc_write(int_en_reg | (1 << ep->num), S3C2410_UDC_EP_INT_EN_REG); |
| 1117 | |
| 1118 | /* print some debug message */ |
| 1119 | tmp = desc->bEndpointAddress; |
| 1120 | dprintk (DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n", |
| 1121 | _ep->name,ep->num, tmp, |
| 1122 | desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max); |
| 1123 | |
| 1124 | local_irq_restore (flags); |
| 1125 | s3c2410_udc_set_halt(_ep, 0); |
| 1126 | |
| 1127 | return 0; |
| 1128 | } |
| 1129 | |
| 1130 | /* |
| 1131 | * s3c2410_udc_ep_disable |
| 1132 | */ |
| 1133 | static int s3c2410_udc_ep_disable(struct usb_ep *_ep) |
| 1134 | { |
| 1135 | struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| 1136 | unsigned long flags; |
| 1137 | u32 int_en_reg; |
| 1138 | |
Ido Shayevitz | fa42e52 | 2012-03-12 20:25:38 +0200 | [diff] [blame] | 1139 | if (!_ep || !ep->ep.desc) { |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1140 | dprintk(DEBUG_NORMAL, "%s not enabled\n", |
| 1141 | _ep ? ep->ep.name : NULL); |
| 1142 | return -EINVAL; |
| 1143 | } |
| 1144 | |
| 1145 | local_irq_save(flags); |
| 1146 | |
| 1147 | dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name); |
| 1148 | |
Ido Shayevitz | f9c56cd | 2012-02-08 13:56:48 +0200 | [diff] [blame] | 1149 | ep->ep.desc = NULL; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1150 | ep->halted = 1; |
| 1151 | |
| 1152 | s3c2410_udc_nuke (ep->dev, ep, -ESHUTDOWN); |
| 1153 | |
| 1154 | /* disable irqs */ |
| 1155 | int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); |
| 1156 | udc_write(int_en_reg & ~(1<<ep->num), S3C2410_UDC_EP_INT_EN_REG); |
| 1157 | |
| 1158 | local_irq_restore(flags); |
| 1159 | |
| 1160 | dprintk(DEBUG_NORMAL, "%s disabled\n", _ep->name); |
| 1161 | |
| 1162 | return 0; |
| 1163 | } |
| 1164 | |
| 1165 | /* |
| 1166 | * s3c2410_udc_alloc_request |
| 1167 | */ |
| 1168 | static struct usb_request * |
| 1169 | s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags) |
| 1170 | { |
| 1171 | struct s3c2410_request *req; |
| 1172 | |
| 1173 | dprintk(DEBUG_VERBOSE,"%s(%p,%d)\n", __func__, _ep, mem_flags); |
| 1174 | |
| 1175 | if (!_ep) |
| 1176 | return NULL; |
| 1177 | |
| 1178 | req = kzalloc (sizeof(struct s3c2410_request), mem_flags); |
| 1179 | if (!req) |
| 1180 | return NULL; |
| 1181 | |
| 1182 | INIT_LIST_HEAD (&req->queue); |
| 1183 | return &req->req; |
| 1184 | } |
| 1185 | |
| 1186 | /* |
| 1187 | * s3c2410_udc_free_request |
| 1188 | */ |
| 1189 | static void |
| 1190 | s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req) |
| 1191 | { |
| 1192 | struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| 1193 | struct s3c2410_request *req = to_s3c2410_req(_req); |
| 1194 | |
| 1195 | dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); |
| 1196 | |
Ido Shayevitz | fa42e52 | 2012-03-12 20:25:38 +0200 | [diff] [blame] | 1197 | if (!ep || !_req || (!ep->ep.desc && _ep->name != ep0name)) |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1198 | return; |
| 1199 | |
| 1200 | WARN_ON (!list_empty (&req->queue)); |
| 1201 | kfree(req); |
| 1202 | } |
| 1203 | |
| 1204 | /* |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1205 | * s3c2410_udc_queue |
| 1206 | */ |
| 1207 | static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, |
| 1208 | gfp_t gfp_flags) |
| 1209 | { |
| 1210 | struct s3c2410_request *req = to_s3c2410_req(_req); |
| 1211 | struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| 1212 | struct s3c2410_udc *dev; |
| 1213 | u32 ep_csr = 0; |
| 1214 | int fifo_count = 0; |
| 1215 | unsigned long flags; |
| 1216 | |
Ido Shayevitz | fa42e52 | 2012-03-12 20:25:38 +0200 | [diff] [blame] | 1217 | if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1218 | dprintk(DEBUG_NORMAL, "%s: invalid args\n", __func__); |
| 1219 | return -EINVAL; |
| 1220 | } |
| 1221 | |
| 1222 | dev = ep->dev; |
| 1223 | if (unlikely (!dev->driver |
| 1224 | || dev->gadget.speed == USB_SPEED_UNKNOWN)) { |
| 1225 | return -ESHUTDOWN; |
| 1226 | } |
| 1227 | |
| 1228 | local_irq_save (flags); |
| 1229 | |
| 1230 | if (unlikely(!_req || !_req->complete |
| 1231 | || !_req->buf || !list_empty(&req->queue))) { |
| 1232 | if (!_req) |
| 1233 | dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__); |
| 1234 | else { |
| 1235 | dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n", |
| 1236 | __func__, !_req->complete,!_req->buf, |
| 1237 | !list_empty(&req->queue)); |
| 1238 | } |
| 1239 | |
| 1240 | local_irq_restore(flags); |
| 1241 | return -EINVAL; |
| 1242 | } |
| 1243 | |
| 1244 | _req->status = -EINPROGRESS; |
| 1245 | _req->actual = 0; |
| 1246 | |
| 1247 | dprintk(DEBUG_VERBOSE, "%s: ep%x len %d\n", |
| 1248 | __func__, ep->bEndpointAddress, _req->length); |
| 1249 | |
| 1250 | if (ep->bEndpointAddress) { |
| 1251 | udc_write(ep->bEndpointAddress & 0x7F, S3C2410_UDC_INDEX_REG); |
| 1252 | |
| 1253 | ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN) |
| 1254 | ? S3C2410_UDC_IN_CSR1_REG |
| 1255 | : S3C2410_UDC_OUT_CSR1_REG); |
| 1256 | fifo_count = s3c2410_udc_fifo_count_out(); |
| 1257 | } else { |
| 1258 | udc_write(0, S3C2410_UDC_INDEX_REG); |
| 1259 | ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 1260 | fifo_count = s3c2410_udc_fifo_count_out(); |
| 1261 | } |
| 1262 | |
| 1263 | /* kickstart this i/o queue? */ |
| 1264 | if (list_empty(&ep->queue) && !ep->halted) { |
| 1265 | if (ep->bEndpointAddress == 0 /* ep0 */) { |
| 1266 | switch (dev->ep0state) { |
| 1267 | case EP0_IN_DATA_PHASE: |
| 1268 | if (!(ep_csr&S3C2410_UDC_EP0_CSR_IPKRDY) |
| 1269 | && s3c2410_udc_write_fifo(ep, |
| 1270 | req)) { |
| 1271 | dev->ep0state = EP0_IDLE; |
| 1272 | req = NULL; |
| 1273 | } |
| 1274 | break; |
| 1275 | |
| 1276 | case EP0_OUT_DATA_PHASE: |
| 1277 | if ((!_req->length) |
| 1278 | || ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY) |
| 1279 | && s3c2410_udc_read_fifo(ep, |
| 1280 | req))) { |
| 1281 | dev->ep0state = EP0_IDLE; |
| 1282 | req = NULL; |
| 1283 | } |
| 1284 | break; |
| 1285 | |
| 1286 | default: |
| 1287 | local_irq_restore(flags); |
| 1288 | return -EL2HLT; |
| 1289 | } |
| 1290 | } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0 |
| 1291 | && (!(ep_csr&S3C2410_UDC_OCSR1_PKTRDY)) |
| 1292 | && s3c2410_udc_write_fifo(ep, req)) { |
| 1293 | req = NULL; |
| 1294 | } else if ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY) |
| 1295 | && fifo_count |
| 1296 | && s3c2410_udc_read_fifo(ep, req)) { |
| 1297 | req = NULL; |
| 1298 | } |
| 1299 | } |
| 1300 | |
| 1301 | /* pio or dma irq handler advances the queue. */ |
| 1302 | if (likely (req != 0)) |
| 1303 | list_add_tail(&req->queue, &ep->queue); |
| 1304 | |
| 1305 | local_irq_restore(flags); |
| 1306 | |
| 1307 | dprintk(DEBUG_VERBOSE, "%s ok\n", __func__); |
| 1308 | return 0; |
| 1309 | } |
| 1310 | |
| 1311 | /* |
| 1312 | * s3c2410_udc_dequeue |
| 1313 | */ |
| 1314 | static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| 1315 | { |
| 1316 | struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| 1317 | struct s3c2410_udc *udc; |
| 1318 | int retval = -EINVAL; |
| 1319 | unsigned long flags; |
| 1320 | struct s3c2410_request *req = NULL; |
| 1321 | |
| 1322 | dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); |
| 1323 | |
| 1324 | if (!the_controller->driver) |
| 1325 | return -ESHUTDOWN; |
| 1326 | |
| 1327 | if (!_ep || !_req) |
| 1328 | return retval; |
| 1329 | |
| 1330 | udc = to_s3c2410_udc(ep->gadget); |
| 1331 | |
| 1332 | local_irq_save (flags); |
| 1333 | |
| 1334 | list_for_each_entry (req, &ep->queue, queue) { |
| 1335 | if (&req->req == _req) { |
| 1336 | list_del_init (&req->queue); |
| 1337 | _req->status = -ECONNRESET; |
| 1338 | retval = 0; |
| 1339 | break; |
| 1340 | } |
| 1341 | } |
| 1342 | |
| 1343 | if (retval == 0) { |
| 1344 | dprintk(DEBUG_VERBOSE, |
| 1345 | "dequeued req %p from %s, len %d buf %p\n", |
| 1346 | req, _ep->name, _req->length, _req->buf); |
| 1347 | |
| 1348 | s3c2410_udc_done(ep, req, -ECONNRESET); |
| 1349 | } |
| 1350 | |
| 1351 | local_irq_restore (flags); |
| 1352 | return retval; |
| 1353 | } |
| 1354 | |
| 1355 | /* |
| 1356 | * s3c2410_udc_set_halt |
| 1357 | */ |
| 1358 | static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) |
| 1359 | { |
| 1360 | struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| 1361 | u32 ep_csr = 0; |
| 1362 | unsigned long flags; |
| 1363 | u32 idx; |
| 1364 | |
Ido Shayevitz | fa42e52 | 2012-03-12 20:25:38 +0200 | [diff] [blame] | 1365 | if (unlikely(!_ep || (!ep->ep.desc && ep->ep.name != ep0name))) { |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1366 | dprintk(DEBUG_NORMAL, "%s: inval 2\n", __func__); |
| 1367 | return -EINVAL; |
| 1368 | } |
| 1369 | |
| 1370 | local_irq_save (flags); |
| 1371 | |
| 1372 | idx = ep->bEndpointAddress & 0x7F; |
| 1373 | |
| 1374 | if (idx == 0) { |
| 1375 | s3c2410_udc_set_ep0_ss(base_addr); |
| 1376 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 1377 | } else { |
| 1378 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 1379 | ep_csr = udc_read((ep->bEndpointAddress &USB_DIR_IN) |
| 1380 | ? S3C2410_UDC_IN_CSR1_REG |
| 1381 | : S3C2410_UDC_OUT_CSR1_REG); |
| 1382 | |
| 1383 | if ((ep->bEndpointAddress & USB_DIR_IN) != 0) { |
| 1384 | if (value) |
| 1385 | udc_write(ep_csr | S3C2410_UDC_ICSR1_SENDSTL, |
| 1386 | S3C2410_UDC_IN_CSR1_REG); |
| 1387 | else { |
| 1388 | ep_csr &= ~S3C2410_UDC_ICSR1_SENDSTL; |
| 1389 | udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG); |
| 1390 | ep_csr |= S3C2410_UDC_ICSR1_CLRDT; |
| 1391 | udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG); |
| 1392 | } |
| 1393 | } else { |
| 1394 | if (value) |
| 1395 | udc_write(ep_csr | S3C2410_UDC_OCSR1_SENDSTL, |
| 1396 | S3C2410_UDC_OUT_CSR1_REG); |
| 1397 | else { |
| 1398 | ep_csr &= ~S3C2410_UDC_OCSR1_SENDSTL; |
| 1399 | udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG); |
| 1400 | ep_csr |= S3C2410_UDC_OCSR1_CLRDT; |
| 1401 | udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG); |
| 1402 | } |
| 1403 | } |
| 1404 | } |
| 1405 | |
| 1406 | ep->halted = value ? 1 : 0; |
| 1407 | local_irq_restore (flags); |
| 1408 | |
| 1409 | return 0; |
| 1410 | } |
| 1411 | |
| 1412 | static const struct usb_ep_ops s3c2410_ep_ops = { |
| 1413 | .enable = s3c2410_udc_ep_enable, |
| 1414 | .disable = s3c2410_udc_ep_disable, |
| 1415 | |
| 1416 | .alloc_request = s3c2410_udc_alloc_request, |
| 1417 | .free_request = s3c2410_udc_free_request, |
| 1418 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1419 | .queue = s3c2410_udc_queue, |
| 1420 | .dequeue = s3c2410_udc_dequeue, |
| 1421 | |
| 1422 | .set_halt = s3c2410_udc_set_halt, |
| 1423 | }; |
| 1424 | |
| 1425 | /*------------------------- usb_gadget_ops ----------------------------------*/ |
| 1426 | |
| 1427 | /* |
| 1428 | * s3c2410_udc_get_frame |
| 1429 | */ |
| 1430 | static int s3c2410_udc_get_frame(struct usb_gadget *_gadget) |
| 1431 | { |
| 1432 | int tmp; |
| 1433 | |
| 1434 | dprintk(DEBUG_VERBOSE, "%s()\n", __func__); |
| 1435 | |
| 1436 | tmp = udc_read(S3C2410_UDC_FRAME_NUM2_REG) << 8; |
| 1437 | tmp |= udc_read(S3C2410_UDC_FRAME_NUM1_REG); |
| 1438 | return tmp; |
| 1439 | } |
| 1440 | |
| 1441 | /* |
| 1442 | * s3c2410_udc_wakeup |
| 1443 | */ |
| 1444 | static int s3c2410_udc_wakeup(struct usb_gadget *_gadget) |
| 1445 | { |
| 1446 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1447 | return 0; |
| 1448 | } |
| 1449 | |
| 1450 | /* |
| 1451 | * s3c2410_udc_set_selfpowered |
| 1452 | */ |
| 1453 | static int s3c2410_udc_set_selfpowered(struct usb_gadget *gadget, int value) |
| 1454 | { |
| 1455 | struct s3c2410_udc *udc = to_s3c2410_udc(gadget); |
| 1456 | |
| 1457 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1458 | |
| 1459 | if (value) |
| 1460 | udc->devstatus |= (1 << USB_DEVICE_SELF_POWERED); |
| 1461 | else |
| 1462 | udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); |
| 1463 | |
| 1464 | return 0; |
| 1465 | } |
| 1466 | |
| 1467 | static void s3c2410_udc_disable(struct s3c2410_udc *dev); |
| 1468 | static void s3c2410_udc_enable(struct s3c2410_udc *dev); |
| 1469 | |
| 1470 | static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) |
| 1471 | { |
| 1472 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1473 | |
Lars-Peter Clausen | a74022a | 2011-03-07 08:41:59 +0100 | [diff] [blame] | 1474 | if (udc_info && (udc_info->udc_command || |
| 1475 | gpio_is_valid(udc_info->pullup_pin))) { |
| 1476 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1477 | if (is_on) |
| 1478 | s3c2410_udc_enable(udc); |
| 1479 | else { |
| 1480 | if (udc->gadget.speed != USB_SPEED_UNKNOWN) { |
| 1481 | if (udc->driver && udc->driver->disconnect) |
| 1482 | udc->driver->disconnect(&udc->gadget); |
| 1483 | |
| 1484 | } |
| 1485 | s3c2410_udc_disable(udc); |
| 1486 | } |
| 1487 | } |
| 1488 | else |
| 1489 | return -EOPNOTSUPP; |
| 1490 | |
| 1491 | return 0; |
| 1492 | } |
| 1493 | |
| 1494 | static int s3c2410_udc_vbus_session(struct usb_gadget *gadget, int is_active) |
| 1495 | { |
| 1496 | struct s3c2410_udc *udc = to_s3c2410_udc(gadget); |
| 1497 | |
| 1498 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1499 | |
| 1500 | udc->vbus = (is_active != 0); |
| 1501 | s3c2410_udc_set_pullup(udc, is_active); |
| 1502 | return 0; |
| 1503 | } |
| 1504 | |
| 1505 | static int s3c2410_udc_pullup(struct usb_gadget *gadget, int is_on) |
| 1506 | { |
| 1507 | struct s3c2410_udc *udc = to_s3c2410_udc(gadget); |
| 1508 | |
| 1509 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1510 | |
| 1511 | s3c2410_udc_set_pullup(udc, is_on ? 0 : 1); |
| 1512 | return 0; |
| 1513 | } |
| 1514 | |
| 1515 | static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev) |
| 1516 | { |
| 1517 | struct s3c2410_udc *dev = _dev; |
| 1518 | unsigned int value; |
| 1519 | |
| 1520 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
Ben Dooks | 5f629ad7 | 2007-11-19 22:28:15 +0000 | [diff] [blame] | 1521 | |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1522 | value = gpio_get_value(udc_info->vbus_pin) ? 1 : 0; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1523 | if (udc_info->vbus_pin_inverted) |
| 1524 | value = !value; |
| 1525 | |
| 1526 | if (value != dev->vbus) |
| 1527 | s3c2410_udc_vbus_session(&dev->gadget, value); |
| 1528 | |
| 1529 | return IRQ_HANDLED; |
| 1530 | } |
| 1531 | |
| 1532 | static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma) |
| 1533 | { |
| 1534 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1535 | |
| 1536 | if (udc_info && udc_info->vbus_draw) { |
| 1537 | udc_info->vbus_draw(ma); |
| 1538 | return 0; |
| 1539 | } |
| 1540 | |
| 1541 | return -ENOTSUPP; |
| 1542 | } |
| 1543 | |
Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1544 | static int s3c2410_udc_start(struct usb_gadget_driver *driver, |
| 1545 | int (*bind)(struct usb_gadget *)); |
| 1546 | static int s3c2410_udc_stop(struct usb_gadget_driver *driver); |
| 1547 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1548 | static const struct usb_gadget_ops s3c2410_ops = { |
| 1549 | .get_frame = s3c2410_udc_get_frame, |
| 1550 | .wakeup = s3c2410_udc_wakeup, |
| 1551 | .set_selfpowered = s3c2410_udc_set_selfpowered, |
| 1552 | .pullup = s3c2410_udc_pullup, |
| 1553 | .vbus_session = s3c2410_udc_vbus_session, |
| 1554 | .vbus_draw = s3c2410_vbus_draw, |
Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1555 | .start = s3c2410_udc_start, |
| 1556 | .stop = s3c2410_udc_stop, |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1557 | }; |
| 1558 | |
Lars-Peter Clausen | a74022a | 2011-03-07 08:41:59 +0100 | [diff] [blame] | 1559 | static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd) |
| 1560 | { |
| 1561 | if (!udc_info) |
| 1562 | return; |
| 1563 | |
| 1564 | if (udc_info->udc_command) { |
Viliam Mateicka | 5b82613 | 2011-06-16 10:04:36 +0200 | [diff] [blame] | 1565 | udc_info->udc_command(cmd); |
Lars-Peter Clausen | a74022a | 2011-03-07 08:41:59 +0100 | [diff] [blame] | 1566 | } else if (gpio_is_valid(udc_info->pullup_pin)) { |
| 1567 | int value; |
| 1568 | |
| 1569 | switch (cmd) { |
| 1570 | case S3C2410_UDC_P_ENABLE: |
| 1571 | value = 1; |
| 1572 | break; |
| 1573 | case S3C2410_UDC_P_DISABLE: |
| 1574 | value = 0; |
| 1575 | break; |
| 1576 | default: |
| 1577 | return; |
| 1578 | } |
| 1579 | value ^= udc_info->pullup_pin_inverted; |
| 1580 | |
| 1581 | gpio_set_value(udc_info->pullup_pin, value); |
| 1582 | } |
| 1583 | } |
| 1584 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1585 | /*------------------------- gadget driver handling---------------------------*/ |
| 1586 | /* |
| 1587 | * s3c2410_udc_disable |
| 1588 | */ |
| 1589 | static void s3c2410_udc_disable(struct s3c2410_udc *dev) |
| 1590 | { |
| 1591 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1592 | |
| 1593 | /* Disable all interrupts */ |
| 1594 | udc_write(0x00, S3C2410_UDC_USB_INT_EN_REG); |
| 1595 | udc_write(0x00, S3C2410_UDC_EP_INT_EN_REG); |
| 1596 | |
| 1597 | /* Clear the interrupt registers */ |
| 1598 | udc_write(S3C2410_UDC_USBINT_RESET |
| 1599 | | S3C2410_UDC_USBINT_RESUME |
| 1600 | | S3C2410_UDC_USBINT_SUSPEND, |
| 1601 | S3C2410_UDC_USB_INT_REG); |
| 1602 | |
| 1603 | udc_write(0x1F, S3C2410_UDC_EP_INT_REG); |
| 1604 | |
| 1605 | /* Good bye, cruel world */ |
Lars-Peter Clausen | a74022a | 2011-03-07 08:41:59 +0100 | [diff] [blame] | 1606 | s3c2410_udc_command(S3C2410_UDC_P_DISABLE); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1607 | |
| 1608 | /* Set speed to unknown */ |
| 1609 | dev->gadget.speed = USB_SPEED_UNKNOWN; |
| 1610 | } |
| 1611 | |
| 1612 | /* |
| 1613 | * s3c2410_udc_reinit |
| 1614 | */ |
| 1615 | static void s3c2410_udc_reinit(struct s3c2410_udc *dev) |
| 1616 | { |
| 1617 | u32 i; |
| 1618 | |
| 1619 | /* device/ep0 records init */ |
| 1620 | INIT_LIST_HEAD (&dev->gadget.ep_list); |
| 1621 | INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); |
| 1622 | dev->ep0state = EP0_IDLE; |
| 1623 | |
| 1624 | for (i = 0; i < S3C2410_ENDPOINTS; i++) { |
| 1625 | struct s3c2410_ep *ep = &dev->ep[i]; |
| 1626 | |
| 1627 | if (i != 0) |
| 1628 | list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); |
| 1629 | |
| 1630 | ep->dev = dev; |
Ido Shayevitz | f9c56cd | 2012-02-08 13:56:48 +0200 | [diff] [blame] | 1631 | ep->ep.desc = NULL; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1632 | ep->halted = 0; |
| 1633 | INIT_LIST_HEAD (&ep->queue); |
| 1634 | } |
| 1635 | } |
| 1636 | |
| 1637 | /* |
| 1638 | * s3c2410_udc_enable |
| 1639 | */ |
| 1640 | static void s3c2410_udc_enable(struct s3c2410_udc *dev) |
| 1641 | { |
| 1642 | int i; |
| 1643 | |
| 1644 | dprintk(DEBUG_NORMAL, "s3c2410_udc_enable called\n"); |
| 1645 | |
| 1646 | /* dev->gadget.speed = USB_SPEED_UNKNOWN; */ |
| 1647 | dev->gadget.speed = USB_SPEED_FULL; |
| 1648 | |
| 1649 | /* Set MAXP for all endpoints */ |
| 1650 | for (i = 0; i < S3C2410_ENDPOINTS; i++) { |
| 1651 | udc_write(i, S3C2410_UDC_INDEX_REG); |
| 1652 | udc_write((dev->ep[i].ep.maxpacket & 0x7ff) >> 3, |
| 1653 | S3C2410_UDC_MAXP_REG); |
| 1654 | } |
| 1655 | |
| 1656 | /* Set default power state */ |
| 1657 | udc_write(DEFAULT_POWER_STATE, S3C2410_UDC_PWR_REG); |
| 1658 | |
| 1659 | /* Enable reset and suspend interrupt interrupts */ |
| 1660 | udc_write(S3C2410_UDC_USBINT_RESET | S3C2410_UDC_USBINT_SUSPEND, |
| 1661 | S3C2410_UDC_USB_INT_EN_REG); |
| 1662 | |
| 1663 | /* Enable ep0 interrupt */ |
| 1664 | udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG); |
| 1665 | |
| 1666 | /* time to say "hello, world" */ |
Lars-Peter Clausen | a74022a | 2011-03-07 08:41:59 +0100 | [diff] [blame] | 1667 | s3c2410_udc_command(S3C2410_UDC_P_ENABLE); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1668 | } |
| 1669 | |
Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1670 | static int s3c2410_udc_start(struct usb_gadget_driver *driver, |
Uwe Kleine-König | b0fca50 | 2010-08-12 17:43:53 +0200 | [diff] [blame] | 1671 | int (*bind)(struct usb_gadget *)) |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1672 | { |
| 1673 | struct s3c2410_udc *udc = the_controller; |
| 1674 | int retval; |
| 1675 | |
Uwe Kleine-König | b0fca50 | 2010-08-12 17:43:53 +0200 | [diff] [blame] | 1676 | dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1677 | |
| 1678 | /* Sanity checks */ |
| 1679 | if (!udc) |
| 1680 | return -ENODEV; |
| 1681 | |
| 1682 | if (udc->driver) |
| 1683 | return -EBUSY; |
| 1684 | |
Michal Nazarewicz | 7177aed | 2011-11-19 18:27:38 +0100 | [diff] [blame] | 1685 | if (!bind || !driver->setup || driver->max_speed < USB_SPEED_FULL) { |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1686 | printk(KERN_ERR "Invalid driver: bind %p setup %p speed %d\n", |
Michal Nazarewicz | 7177aed | 2011-11-19 18:27:38 +0100 | [diff] [blame] | 1687 | bind, driver->setup, driver->max_speed); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1688 | return -EINVAL; |
| 1689 | } |
| 1690 | #if defined(MODULE) |
| 1691 | if (!driver->unbind) { |
| 1692 | printk(KERN_ERR "Invalid driver: no unbind method\n"); |
| 1693 | return -EINVAL; |
| 1694 | } |
| 1695 | #endif |
| 1696 | |
| 1697 | /* Hook the driver */ |
| 1698 | udc->driver = driver; |
| 1699 | udc->gadget.dev.driver = &driver->driver; |
| 1700 | |
| 1701 | /* Bind the driver */ |
| 1702 | if ((retval = device_add(&udc->gadget.dev)) != 0) { |
| 1703 | printk(KERN_ERR "Error in device_add() : %d\n",retval); |
| 1704 | goto register_error; |
| 1705 | } |
| 1706 | |
| 1707 | dprintk(DEBUG_NORMAL, "binding gadget driver '%s'\n", |
| 1708 | driver->driver.name); |
| 1709 | |
Uwe Kleine-König | b0fca50 | 2010-08-12 17:43:53 +0200 | [diff] [blame] | 1710 | if ((retval = bind(&udc->gadget)) != 0) { |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1711 | device_del(&udc->gadget.dev); |
| 1712 | goto register_error; |
| 1713 | } |
| 1714 | |
| 1715 | /* Enable udc */ |
| 1716 | s3c2410_udc_enable(udc); |
| 1717 | |
| 1718 | return 0; |
| 1719 | |
| 1720 | register_error: |
| 1721 | udc->driver = NULL; |
| 1722 | udc->gadget.dev.driver = NULL; |
| 1723 | return retval; |
| 1724 | } |
| 1725 | |
Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1726 | static int s3c2410_udc_stop(struct usb_gadget_driver *driver) |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1727 | { |
| 1728 | struct s3c2410_udc *udc = the_controller; |
| 1729 | |
| 1730 | if (!udc) |
| 1731 | return -ENODEV; |
| 1732 | |
| 1733 | if (!driver || driver != udc->driver || !driver->unbind) |
| 1734 | return -EINVAL; |
| 1735 | |
Vladimir Zapolskiy | 3b49d23 | 2010-06-18 08:25:00 +0400 | [diff] [blame] | 1736 | dprintk(DEBUG_NORMAL, "usb_gadget_unregister_driver() '%s'\n", |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1737 | driver->driver.name); |
| 1738 | |
Vladimir Zapolskiy | 3b49d23 | 2010-06-18 08:25:00 +0400 | [diff] [blame] | 1739 | /* report disconnect */ |
| 1740 | if (driver->disconnect) |
| 1741 | driver->disconnect(&udc->gadget); |
| 1742 | |
Alan Stern | 823c3fd | 2009-08-03 11:05:59 -0400 | [diff] [blame] | 1743 | driver->unbind(&udc->gadget); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1744 | |
| 1745 | device_del(&udc->gadget.dev); |
| 1746 | udc->driver = NULL; |
| 1747 | |
| 1748 | /* Disable udc */ |
| 1749 | s3c2410_udc_disable(udc); |
| 1750 | |
| 1751 | return 0; |
| 1752 | } |
| 1753 | |
| 1754 | /*---------------------------------------------------------------------------*/ |
| 1755 | static struct s3c2410_udc memory = { |
| 1756 | .gadget = { |
| 1757 | .ops = &s3c2410_ops, |
| 1758 | .ep0 = &memory.ep[0].ep, |
| 1759 | .name = gadget_name, |
| 1760 | .dev = { |
Kay Sievers | c682b17 | 2009-01-06 10:44:42 -0800 | [diff] [blame] | 1761 | .init_name = "gadget", |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1762 | }, |
| 1763 | }, |
| 1764 | |
| 1765 | /* control endpoint */ |
| 1766 | .ep[0] = { |
| 1767 | .num = 0, |
| 1768 | .ep = { |
| 1769 | .name = ep0name, |
| 1770 | .ops = &s3c2410_ep_ops, |
| 1771 | .maxpacket = EP0_FIFO_SIZE, |
| 1772 | }, |
| 1773 | .dev = &memory, |
| 1774 | }, |
| 1775 | |
| 1776 | /* first group of endpoints */ |
| 1777 | .ep[1] = { |
| 1778 | .num = 1, |
| 1779 | .ep = { |
| 1780 | .name = "ep1-bulk", |
| 1781 | .ops = &s3c2410_ep_ops, |
| 1782 | .maxpacket = EP_FIFO_SIZE, |
| 1783 | }, |
| 1784 | .dev = &memory, |
| 1785 | .fifo_size = EP_FIFO_SIZE, |
| 1786 | .bEndpointAddress = 1, |
| 1787 | .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| 1788 | }, |
| 1789 | .ep[2] = { |
| 1790 | .num = 2, |
| 1791 | .ep = { |
| 1792 | .name = "ep2-bulk", |
| 1793 | .ops = &s3c2410_ep_ops, |
| 1794 | .maxpacket = EP_FIFO_SIZE, |
| 1795 | }, |
| 1796 | .dev = &memory, |
| 1797 | .fifo_size = EP_FIFO_SIZE, |
| 1798 | .bEndpointAddress = 2, |
| 1799 | .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| 1800 | }, |
| 1801 | .ep[3] = { |
| 1802 | .num = 3, |
| 1803 | .ep = { |
| 1804 | .name = "ep3-bulk", |
| 1805 | .ops = &s3c2410_ep_ops, |
| 1806 | .maxpacket = EP_FIFO_SIZE, |
| 1807 | }, |
| 1808 | .dev = &memory, |
| 1809 | .fifo_size = EP_FIFO_SIZE, |
| 1810 | .bEndpointAddress = 3, |
| 1811 | .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| 1812 | }, |
| 1813 | .ep[4] = { |
| 1814 | .num = 4, |
| 1815 | .ep = { |
| 1816 | .name = "ep4-bulk", |
| 1817 | .ops = &s3c2410_ep_ops, |
| 1818 | .maxpacket = EP_FIFO_SIZE, |
| 1819 | }, |
| 1820 | .dev = &memory, |
| 1821 | .fifo_size = EP_FIFO_SIZE, |
| 1822 | .bEndpointAddress = 4, |
| 1823 | .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| 1824 | } |
| 1825 | |
| 1826 | }; |
| 1827 | |
| 1828 | /* |
| 1829 | * probe - binds to the platform device |
| 1830 | */ |
| 1831 | static int s3c2410_udc_probe(struct platform_device *pdev) |
| 1832 | { |
| 1833 | struct s3c2410_udc *udc = &memory; |
| 1834 | struct device *dev = &pdev->dev; |
| 1835 | int retval; |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1836 | int irq; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1837 | |
| 1838 | dev_dbg(dev, "%s()\n", __func__); |
| 1839 | |
| 1840 | usb_bus_clock = clk_get(NULL, "usb-bus-gadget"); |
| 1841 | if (IS_ERR(usb_bus_clock)) { |
| 1842 | dev_err(dev, "failed to get usb bus clock source\n"); |
| 1843 | return PTR_ERR(usb_bus_clock); |
| 1844 | } |
| 1845 | |
| 1846 | clk_enable(usb_bus_clock); |
| 1847 | |
| 1848 | udc_clock = clk_get(NULL, "usb-device"); |
| 1849 | if (IS_ERR(udc_clock)) { |
| 1850 | dev_err(dev, "failed to get udc clock source\n"); |
| 1851 | return PTR_ERR(udc_clock); |
| 1852 | } |
| 1853 | |
| 1854 | clk_enable(udc_clock); |
| 1855 | |
| 1856 | mdelay(10); |
| 1857 | |
| 1858 | dev_dbg(dev, "got and enabled clocks\n"); |
| 1859 | |
| 1860 | if (strncmp(pdev->name, "s3c2440", 7) == 0) { |
| 1861 | dev_info(dev, "S3C2440: increasing FIFO to 128 bytes\n"); |
| 1862 | memory.ep[1].fifo_size = S3C2440_EP_FIFO_SIZE; |
| 1863 | memory.ep[2].fifo_size = S3C2440_EP_FIFO_SIZE; |
| 1864 | memory.ep[3].fifo_size = S3C2440_EP_FIFO_SIZE; |
| 1865 | memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE; |
| 1866 | } |
| 1867 | |
| 1868 | spin_lock_init (&udc->lock); |
| 1869 | udc_info = pdev->dev.platform_data; |
| 1870 | |
| 1871 | rsrc_start = S3C2410_PA_USBDEV; |
| 1872 | rsrc_len = S3C24XX_SZ_USBDEV; |
| 1873 | |
| 1874 | if (!request_mem_region(rsrc_start, rsrc_len, gadget_name)) |
| 1875 | return -EBUSY; |
| 1876 | |
| 1877 | base_addr = ioremap(rsrc_start, rsrc_len); |
| 1878 | if (!base_addr) { |
| 1879 | retval = -ENOMEM; |
| 1880 | goto err_mem; |
| 1881 | } |
| 1882 | |
| 1883 | device_initialize(&udc->gadget.dev); |
| 1884 | udc->gadget.dev.parent = &pdev->dev; |
| 1885 | udc->gadget.dev.dma_mask = pdev->dev.dma_mask; |
| 1886 | |
| 1887 | the_controller = udc; |
| 1888 | platform_set_drvdata(pdev, udc); |
| 1889 | |
| 1890 | s3c2410_udc_disable(udc); |
| 1891 | s3c2410_udc_reinit(udc); |
| 1892 | |
| 1893 | /* irq setup after old hardware state is cleaned up */ |
| 1894 | retval = request_irq(IRQ_USBD, s3c2410_udc_irq, |
Yong Zhang | b5dd18d | 2011-09-07 16:10:52 +0800 | [diff] [blame] | 1895 | 0, gadget_name, udc); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1896 | |
| 1897 | if (retval != 0) { |
| 1898 | dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval); |
| 1899 | retval = -EBUSY; |
| 1900 | goto err_map; |
| 1901 | } |
| 1902 | |
| 1903 | dev_dbg(dev, "got irq %i\n", IRQ_USBD); |
| 1904 | |
| 1905 | if (udc_info && udc_info->vbus_pin > 0) { |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1906 | retval = gpio_request(udc_info->vbus_pin, "udc vbus"); |
| 1907 | if (retval < 0) { |
| 1908 | dev_err(dev, "cannot claim vbus pin\n"); |
| 1909 | goto err_int; |
| 1910 | } |
| 1911 | |
| 1912 | irq = gpio_to_irq(udc_info->vbus_pin); |
| 1913 | if (irq < 0) { |
| 1914 | dev_err(dev, "no irq for gpio vbus pin\n"); |
| 1915 | goto err_gpio_claim; |
| 1916 | } |
| 1917 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1918 | retval = request_irq(irq, s3c2410_udc_vbus_irq, |
Yong Zhang | b5dd18d | 2011-09-07 16:10:52 +0800 | [diff] [blame] | 1919 | IRQF_TRIGGER_RISING |
Ben Dooks | 8802bca | 2007-11-19 22:28:14 +0000 | [diff] [blame] | 1920 | | IRQF_TRIGGER_FALLING | IRQF_SHARED, |
| 1921 | gadget_name, udc); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1922 | |
| 1923 | if (retval != 0) { |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1924 | dev_err(dev, "can't get vbus irq %d, err %d\n", |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1925 | irq, retval); |
| 1926 | retval = -EBUSY; |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1927 | goto err_gpio_claim; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1928 | } |
| 1929 | |
| 1930 | dev_dbg(dev, "got irq %i\n", irq); |
| 1931 | } else { |
| 1932 | udc->vbus = 1; |
| 1933 | } |
| 1934 | |
Lars-Peter Clausen | a74022a | 2011-03-07 08:41:59 +0100 | [diff] [blame] | 1935 | if (udc_info && !udc_info->udc_command && |
| 1936 | gpio_is_valid(udc_info->pullup_pin)) { |
| 1937 | |
| 1938 | retval = gpio_request_one(udc_info->pullup_pin, |
| 1939 | udc_info->vbus_pin_inverted ? |
| 1940 | GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, |
| 1941 | "udc pullup"); |
| 1942 | if (retval) |
| 1943 | goto err_vbus_irq; |
| 1944 | } |
| 1945 | |
Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1946 | retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); |
| 1947 | if (retval) |
| 1948 | goto err_add_udc; |
| 1949 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1950 | if (s3c2410_udc_debugfs_root) { |
| 1951 | udc->regs_info = debugfs_create_file("registers", S_IRUGO, |
| 1952 | s3c2410_udc_debugfs_root, |
| 1953 | udc, &s3c2410_udc_debugfs_fops); |
Zhaolei | d66937d | 2008-10-20 18:53:04 +0800 | [diff] [blame] | 1954 | if (!udc->regs_info) |
| 1955 | dev_warn(dev, "debugfs file creation failed\n"); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1956 | } |
| 1957 | |
| 1958 | dev_dbg(dev, "probe ok\n"); |
| 1959 | |
| 1960 | return 0; |
| 1961 | |
Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1962 | err_add_udc: |
| 1963 | if (udc_info && !udc_info->udc_command && |
| 1964 | gpio_is_valid(udc_info->pullup_pin)) |
| 1965 | gpio_free(udc_info->pullup_pin); |
Lars-Peter Clausen | a74022a | 2011-03-07 08:41:59 +0100 | [diff] [blame] | 1966 | err_vbus_irq: |
| 1967 | if (udc_info && udc_info->vbus_pin > 0) |
| 1968 | free_irq(gpio_to_irq(udc_info->vbus_pin), udc); |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1969 | err_gpio_claim: |
| 1970 | if (udc_info && udc_info->vbus_pin > 0) |
| 1971 | gpio_free(udc_info->vbus_pin); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1972 | err_int: |
| 1973 | free_irq(IRQ_USBD, udc); |
| 1974 | err_map: |
| 1975 | iounmap(base_addr); |
| 1976 | err_mem: |
| 1977 | release_mem_region(rsrc_start, rsrc_len); |
| 1978 | |
| 1979 | return retval; |
| 1980 | } |
| 1981 | |
| 1982 | /* |
| 1983 | * s3c2410_udc_remove |
| 1984 | */ |
| 1985 | static int s3c2410_udc_remove(struct platform_device *pdev) |
| 1986 | { |
| 1987 | struct s3c2410_udc *udc = platform_get_drvdata(pdev); |
| 1988 | unsigned int irq; |
| 1989 | |
| 1990 | dev_dbg(&pdev->dev, "%s()\n", __func__); |
Sebastian Andrzej Siewior | 0f91349 | 2011-06-28 16:33:47 +0300 | [diff] [blame] | 1991 | |
| 1992 | usb_del_gadget_udc(&udc->gadget); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1993 | if (udc->driver) |
| 1994 | return -EBUSY; |
| 1995 | |
| 1996 | debugfs_remove(udc->regs_info); |
| 1997 | |
Lars-Peter Clausen | a74022a | 2011-03-07 08:41:59 +0100 | [diff] [blame] | 1998 | if (udc_info && !udc_info->udc_command && |
| 1999 | gpio_is_valid(udc_info->pullup_pin)) |
| 2000 | gpio_free(udc_info->pullup_pin); |
| 2001 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2002 | if (udc_info && udc_info->vbus_pin > 0) { |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 2003 | irq = gpio_to_irq(udc_info->vbus_pin); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2004 | free_irq(irq, udc); |
| 2005 | } |
| 2006 | |
| 2007 | free_irq(IRQ_USBD, udc); |
| 2008 | |
| 2009 | iounmap(base_addr); |
| 2010 | release_mem_region(rsrc_start, rsrc_len); |
| 2011 | |
| 2012 | platform_set_drvdata(pdev, NULL); |
| 2013 | |
| 2014 | if (!IS_ERR(udc_clock) && udc_clock != NULL) { |
| 2015 | clk_disable(udc_clock); |
| 2016 | clk_put(udc_clock); |
| 2017 | udc_clock = NULL; |
| 2018 | } |
| 2019 | |
| 2020 | if (!IS_ERR(usb_bus_clock) && usb_bus_clock != NULL) { |
| 2021 | clk_disable(usb_bus_clock); |
| 2022 | clk_put(usb_bus_clock); |
| 2023 | usb_bus_clock = NULL; |
| 2024 | } |
| 2025 | |
| 2026 | dev_dbg(&pdev->dev, "%s: remove ok\n", __func__); |
| 2027 | return 0; |
| 2028 | } |
| 2029 | |
| 2030 | #ifdef CONFIG_PM |
| 2031 | static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) |
| 2032 | { |
Lars-Peter Clausen | a74022a | 2011-03-07 08:41:59 +0100 | [diff] [blame] | 2033 | s3c2410_udc_command(S3C2410_UDC_P_DISABLE); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2034 | |
| 2035 | return 0; |
| 2036 | } |
| 2037 | |
| 2038 | static int s3c2410_udc_resume(struct platform_device *pdev) |
| 2039 | { |
Lars-Peter Clausen | a74022a | 2011-03-07 08:41:59 +0100 | [diff] [blame] | 2040 | s3c2410_udc_command(S3C2410_UDC_P_ENABLE); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2041 | |
| 2042 | return 0; |
| 2043 | } |
| 2044 | #else |
| 2045 | #define s3c2410_udc_suspend NULL |
| 2046 | #define s3c2410_udc_resume NULL |
| 2047 | #endif |
| 2048 | |
Sebastian Andrzej Siewior | 513385a | 2011-06-29 16:41:56 +0300 | [diff] [blame] | 2049 | static const struct platform_device_id s3c_udc_ids[] = { |
| 2050 | { "s3c2410-usbgadget", }, |
| 2051 | { "s3c2440-usbgadget", }, |
Axel Lin | 7e9d40f | 2011-07-12 19:05:29 +0800 | [diff] [blame] | 2052 | { } |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2053 | }; |
Sebastian Andrzej Siewior | 513385a | 2011-06-29 16:41:56 +0300 | [diff] [blame] | 2054 | MODULE_DEVICE_TABLE(platform, s3c_udc_ids); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2055 | |
Sebastian Andrzej Siewior | 513385a | 2011-06-29 16:41:56 +0300 | [diff] [blame] | 2056 | static struct platform_driver udc_driver_24x0 = { |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2057 | .driver = { |
Sebastian Andrzej Siewior | 513385a | 2011-06-29 16:41:56 +0300 | [diff] [blame] | 2058 | .name = "s3c24x0-usbgadget", |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2059 | .owner = THIS_MODULE, |
| 2060 | }, |
| 2061 | .probe = s3c2410_udc_probe, |
| 2062 | .remove = s3c2410_udc_remove, |
| 2063 | .suspend = s3c2410_udc_suspend, |
| 2064 | .resume = s3c2410_udc_resume, |
Sebastian Andrzej Siewior | 513385a | 2011-06-29 16:41:56 +0300 | [diff] [blame] | 2065 | .id_table = s3c_udc_ids, |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2066 | }; |
| 2067 | |
| 2068 | static int __init udc_init(void) |
| 2069 | { |
| 2070 | int retval; |
| 2071 | |
| 2072 | dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION); |
| 2073 | |
| 2074 | s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL); |
| 2075 | if (IS_ERR(s3c2410_udc_debugfs_root)) { |
| 2076 | printk(KERN_ERR "%s: debugfs dir creation failed %ld\n", |
| 2077 | gadget_name, PTR_ERR(s3c2410_udc_debugfs_root)); |
| 2078 | s3c2410_udc_debugfs_root = NULL; |
| 2079 | } |
| 2080 | |
Sebastian Andrzej Siewior | 513385a | 2011-06-29 16:41:56 +0300 | [diff] [blame] | 2081 | retval = platform_driver_register(&udc_driver_24x0); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2082 | if (retval) |
| 2083 | goto err; |
| 2084 | |
| 2085 | return 0; |
| 2086 | |
| 2087 | err: |
| 2088 | debugfs_remove(s3c2410_udc_debugfs_root); |
| 2089 | return retval; |
| 2090 | } |
| 2091 | |
| 2092 | static void __exit udc_exit(void) |
| 2093 | { |
Sebastian Andrzej Siewior | 513385a | 2011-06-29 16:41:56 +0300 | [diff] [blame] | 2094 | platform_driver_unregister(&udc_driver_24x0); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2095 | debugfs_remove(s3c2410_udc_debugfs_root); |
| 2096 | } |
| 2097 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 2098 | module_init(udc_init); |
| 2099 | module_exit(udc_exit); |
| 2100 | |
| 2101 | MODULE_AUTHOR(DRIVER_AUTHOR); |
| 2102 | MODULE_DESCRIPTION(DRIVER_DESC); |
| 2103 | MODULE_VERSION(DRIVER_VERSION); |
| 2104 | MODULE_LICENSE("GPL"); |