Amit Daniel Kachhap | 49d7b5b | 2013-04-08 09:57:34 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| 3 | * http://www.samsung.com |
| 4 | * |
| 5 | * Amit Daniel Kachhap <amit.daniel@samsung.com> |
| 6 | * |
| 7 | * EXYNOS5440 - CPU frequency scaling support |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License version 2 as |
| 11 | * published by the Free Software Foundation. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/clk.h> |
| 15 | #include <linux/cpu.h> |
| 16 | #include <linux/cpufreq.h> |
| 17 | #include <linux/err.h> |
| 18 | #include <linux/interrupt.h> |
| 19 | #include <linux/io.h> |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/of_address.h> |
| 22 | #include <linux/of_irq.h> |
| 23 | #include <linux/opp.h> |
| 24 | #include <linux/platform_device.h> |
| 25 | #include <linux/slab.h> |
| 26 | |
| 27 | /* Register definitions */ |
| 28 | #define XMU_DVFS_CTRL 0x0060 |
| 29 | #define XMU_PMU_P0_7 0x0064 |
| 30 | #define XMU_C0_3_PSTATE 0x0090 |
| 31 | #define XMU_P_LIMIT 0x00a0 |
| 32 | #define XMU_P_STATUS 0x00a4 |
| 33 | #define XMU_PMUEVTEN 0x00d0 |
| 34 | #define XMU_PMUIRQEN 0x00d4 |
| 35 | #define XMU_PMUIRQ 0x00d8 |
| 36 | |
| 37 | /* PMU mask and shift definations */ |
| 38 | #define P_VALUE_MASK 0x7 |
| 39 | |
| 40 | #define XMU_DVFS_CTRL_EN_SHIFT 0 |
| 41 | |
| 42 | #define P0_7_CPUCLKDEV_SHIFT 21 |
| 43 | #define P0_7_CPUCLKDEV_MASK 0x7 |
| 44 | #define P0_7_ATBCLKDEV_SHIFT 18 |
| 45 | #define P0_7_ATBCLKDEV_MASK 0x7 |
| 46 | #define P0_7_CSCLKDEV_SHIFT 15 |
| 47 | #define P0_7_CSCLKDEV_MASK 0x7 |
| 48 | #define P0_7_CPUEMA_SHIFT 28 |
| 49 | #define P0_7_CPUEMA_MASK 0xf |
| 50 | #define P0_7_L2EMA_SHIFT 24 |
| 51 | #define P0_7_L2EMA_MASK 0xf |
| 52 | #define P0_7_VDD_SHIFT 8 |
| 53 | #define P0_7_VDD_MASK 0x7f |
| 54 | #define P0_7_FREQ_SHIFT 0 |
| 55 | #define P0_7_FREQ_MASK 0xff |
| 56 | |
| 57 | #define C0_3_PSTATE_VALID_SHIFT 8 |
| 58 | #define C0_3_PSTATE_CURR_SHIFT 4 |
| 59 | #define C0_3_PSTATE_NEW_SHIFT 0 |
| 60 | |
| 61 | #define PSTATE_CHANGED_EVTEN_SHIFT 0 |
| 62 | |
| 63 | #define PSTATE_CHANGED_IRQEN_SHIFT 0 |
| 64 | |
| 65 | #define PSTATE_CHANGED_SHIFT 0 |
| 66 | |
| 67 | /* some constant values for clock divider calculation */ |
| 68 | #define CPU_DIV_FREQ_MAX 500 |
| 69 | #define CPU_DBG_FREQ_MAX 375 |
| 70 | #define CPU_ATB_FREQ_MAX 500 |
| 71 | |
| 72 | #define PMIC_LOW_VOLT 0x30 |
| 73 | #define PMIC_HIGH_VOLT 0x28 |
| 74 | |
| 75 | #define CPUEMA_HIGH 0x2 |
| 76 | #define CPUEMA_MID 0x4 |
| 77 | #define CPUEMA_LOW 0x7 |
| 78 | |
| 79 | #define L2EMA_HIGH 0x1 |
| 80 | #define L2EMA_MID 0x3 |
| 81 | #define L2EMA_LOW 0x4 |
| 82 | |
| 83 | #define DIV_TAB_MAX 2 |
| 84 | /* frequency unit is 20MHZ */ |
| 85 | #define FREQ_UNIT 20 |
| 86 | #define MAX_VOLTAGE 1550000 /* In microvolt */ |
| 87 | #define VOLTAGE_STEP 12500 /* In microvolt */ |
| 88 | |
| 89 | #define CPUFREQ_NAME "exynos5440_dvfs" |
| 90 | #define DEF_TRANS_LATENCY 100000 |
| 91 | |
| 92 | enum cpufreq_level_index { |
| 93 | L0, L1, L2, L3, L4, |
| 94 | L5, L6, L7, L8, L9, |
| 95 | }; |
| 96 | #define CPUFREQ_LEVEL_END (L7 + 1) |
| 97 | |
| 98 | struct exynos_dvfs_data { |
| 99 | void __iomem *base; |
| 100 | struct resource *mem; |
| 101 | int irq; |
| 102 | struct clk *cpu_clk; |
| 103 | unsigned int cur_frequency; |
| 104 | unsigned int latency; |
| 105 | struct cpufreq_frequency_table *freq_table; |
| 106 | unsigned int freq_count; |
| 107 | struct device *dev; |
| 108 | bool dvfs_enabled; |
| 109 | struct work_struct irq_work; |
| 110 | }; |
| 111 | |
| 112 | static struct exynos_dvfs_data *dvfs_info; |
| 113 | static DEFINE_MUTEX(cpufreq_lock); |
| 114 | static struct cpufreq_freqs freqs; |
| 115 | |
| 116 | static int init_div_table(void) |
| 117 | { |
| 118 | struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table; |
| 119 | unsigned int tmp, clk_div, ema_div, freq, volt_id; |
| 120 | int i = 0; |
| 121 | struct opp *opp; |
| 122 | |
Amit Daniel Kachhap | 70eb085 | 2013-04-22 00:24:37 +0200 | [diff] [blame] | 123 | rcu_read_lock(); |
Amit Daniel Kachhap | 49d7b5b | 2013-04-08 09:57:34 +0000 | [diff] [blame] | 124 | for (i = 0; freq_tbl[i].frequency != CPUFREQ_TABLE_END; i++) { |
| 125 | |
| 126 | opp = opp_find_freq_exact(dvfs_info->dev, |
| 127 | freq_tbl[i].frequency * 1000, true); |
| 128 | if (IS_ERR(opp)) { |
Amit Daniel Kachhap | 70eb085 | 2013-04-22 00:24:37 +0200 | [diff] [blame] | 129 | rcu_read_unlock(); |
Amit Daniel Kachhap | 49d7b5b | 2013-04-08 09:57:34 +0000 | [diff] [blame] | 130 | dev_err(dvfs_info->dev, |
| 131 | "failed to find valid OPP for %u KHZ\n", |
| 132 | freq_tbl[i].frequency); |
| 133 | return PTR_ERR(opp); |
| 134 | } |
| 135 | |
| 136 | freq = freq_tbl[i].frequency / 1000; /* In MHZ */ |
| 137 | clk_div = ((freq / CPU_DIV_FREQ_MAX) & P0_7_CPUCLKDEV_MASK) |
| 138 | << P0_7_CPUCLKDEV_SHIFT; |
| 139 | clk_div |= ((freq / CPU_ATB_FREQ_MAX) & P0_7_ATBCLKDEV_MASK) |
| 140 | << P0_7_ATBCLKDEV_SHIFT; |
| 141 | clk_div |= ((freq / CPU_DBG_FREQ_MAX) & P0_7_CSCLKDEV_MASK) |
| 142 | << P0_7_CSCLKDEV_SHIFT; |
| 143 | |
| 144 | /* Calculate EMA */ |
| 145 | volt_id = opp_get_voltage(opp); |
| 146 | volt_id = (MAX_VOLTAGE - volt_id) / VOLTAGE_STEP; |
| 147 | if (volt_id < PMIC_HIGH_VOLT) { |
| 148 | ema_div = (CPUEMA_HIGH << P0_7_CPUEMA_SHIFT) | |
| 149 | (L2EMA_HIGH << P0_7_L2EMA_SHIFT); |
| 150 | } else if (volt_id > PMIC_LOW_VOLT) { |
| 151 | ema_div = (CPUEMA_LOW << P0_7_CPUEMA_SHIFT) | |
| 152 | (L2EMA_LOW << P0_7_L2EMA_SHIFT); |
| 153 | } else { |
| 154 | ema_div = (CPUEMA_MID << P0_7_CPUEMA_SHIFT) | |
| 155 | (L2EMA_MID << P0_7_L2EMA_SHIFT); |
| 156 | } |
| 157 | |
| 158 | tmp = (clk_div | ema_div | (volt_id << P0_7_VDD_SHIFT) |
| 159 | | ((freq / FREQ_UNIT) << P0_7_FREQ_SHIFT)); |
| 160 | |
| 161 | __raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 * i); |
| 162 | } |
| 163 | |
Amit Daniel Kachhap | 70eb085 | 2013-04-22 00:24:37 +0200 | [diff] [blame] | 164 | rcu_read_unlock(); |
Amit Daniel Kachhap | 49d7b5b | 2013-04-08 09:57:34 +0000 | [diff] [blame] | 165 | return 0; |
| 166 | } |
| 167 | |
| 168 | static void exynos_enable_dvfs(void) |
| 169 | { |
| 170 | unsigned int tmp, i, cpu; |
| 171 | struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table; |
| 172 | /* Disable DVFS */ |
| 173 | __raw_writel(0, dvfs_info->base + XMU_DVFS_CTRL); |
| 174 | |
| 175 | /* Enable PSTATE Change Event */ |
| 176 | tmp = __raw_readl(dvfs_info->base + XMU_PMUEVTEN); |
| 177 | tmp |= (1 << PSTATE_CHANGED_EVTEN_SHIFT); |
| 178 | __raw_writel(tmp, dvfs_info->base + XMU_PMUEVTEN); |
| 179 | |
| 180 | /* Enable PSTATE Change IRQ */ |
| 181 | tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQEN); |
| 182 | tmp |= (1 << PSTATE_CHANGED_IRQEN_SHIFT); |
| 183 | __raw_writel(tmp, dvfs_info->base + XMU_PMUIRQEN); |
| 184 | |
| 185 | /* Set initial performance index */ |
| 186 | for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) |
| 187 | if (freq_table[i].frequency == dvfs_info->cur_frequency) |
| 188 | break; |
| 189 | |
| 190 | if (freq_table[i].frequency == CPUFREQ_TABLE_END) { |
| 191 | dev_crit(dvfs_info->dev, "Boot up frequency not supported\n"); |
| 192 | /* Assign the highest frequency */ |
| 193 | i = 0; |
| 194 | dvfs_info->cur_frequency = freq_table[i].frequency; |
| 195 | } |
| 196 | |
| 197 | dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ", |
| 198 | dvfs_info->cur_frequency); |
| 199 | |
| 200 | for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) { |
| 201 | tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4); |
| 202 | tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT); |
| 203 | tmp |= (i << C0_3_PSTATE_NEW_SHIFT); |
| 204 | __raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4); |
| 205 | } |
| 206 | |
| 207 | /* Enable DVFS */ |
| 208 | __raw_writel(1 << XMU_DVFS_CTRL_EN_SHIFT, |
| 209 | dvfs_info->base + XMU_DVFS_CTRL); |
| 210 | } |
| 211 | |
| 212 | static int exynos_verify_speed(struct cpufreq_policy *policy) |
| 213 | { |
| 214 | return cpufreq_frequency_table_verify(policy, |
| 215 | dvfs_info->freq_table); |
| 216 | } |
| 217 | |
| 218 | static unsigned int exynos_getspeed(unsigned int cpu) |
| 219 | { |
| 220 | return dvfs_info->cur_frequency; |
| 221 | } |
| 222 | |
| 223 | static int exynos_target(struct cpufreq_policy *policy, |
| 224 | unsigned int target_freq, |
| 225 | unsigned int relation) |
| 226 | { |
| 227 | unsigned int index, tmp; |
| 228 | int ret = 0, i; |
| 229 | struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table; |
| 230 | |
| 231 | mutex_lock(&cpufreq_lock); |
| 232 | |
| 233 | ret = cpufreq_frequency_table_target(policy, freq_table, |
| 234 | target_freq, relation, &index); |
| 235 | if (ret) |
| 236 | goto out; |
| 237 | |
| 238 | freqs.old = dvfs_info->cur_frequency; |
| 239 | freqs.new = freq_table[index].frequency; |
| 240 | |
Amit Daniel Kachhap | c721d15 | 2013-08-07 16:46:11 +0530 | [diff] [blame] | 241 | if (freqs.old == freqs.new) |
| 242 | goto out; |
| 243 | |
Amit Daniel Kachhap | 49d7b5b | 2013-04-08 09:57:34 +0000 | [diff] [blame] | 244 | cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); |
| 245 | |
| 246 | /* Set the target frequency in all C0_3_PSTATE register */ |
| 247 | for_each_cpu(i, policy->cpus) { |
| 248 | tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + i * 4); |
| 249 | tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT); |
| 250 | tmp |= (index << C0_3_PSTATE_NEW_SHIFT); |
| 251 | |
| 252 | __raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + i * 4); |
| 253 | } |
| 254 | out: |
| 255 | mutex_unlock(&cpufreq_lock); |
| 256 | return ret; |
| 257 | } |
| 258 | |
| 259 | static void exynos_cpufreq_work(struct work_struct *work) |
| 260 | { |
| 261 | unsigned int cur_pstate, index; |
| 262 | struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */ |
| 263 | struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table; |
| 264 | |
| 265 | /* Ensure we can access cpufreq structures */ |
| 266 | if (unlikely(dvfs_info->dvfs_enabled == false)) |
| 267 | goto skip_work; |
| 268 | |
| 269 | mutex_lock(&cpufreq_lock); |
| 270 | freqs.old = dvfs_info->cur_frequency; |
| 271 | |
| 272 | cur_pstate = __raw_readl(dvfs_info->base + XMU_P_STATUS); |
| 273 | if (cur_pstate >> C0_3_PSTATE_VALID_SHIFT & 0x1) |
| 274 | index = (cur_pstate >> C0_3_PSTATE_CURR_SHIFT) & P_VALUE_MASK; |
| 275 | else |
| 276 | index = (cur_pstate >> C0_3_PSTATE_NEW_SHIFT) & P_VALUE_MASK; |
| 277 | |
| 278 | if (likely(index < dvfs_info->freq_count)) { |
| 279 | freqs.new = freq_table[index].frequency; |
| 280 | dvfs_info->cur_frequency = freqs.new; |
| 281 | } else { |
| 282 | dev_crit(dvfs_info->dev, "New frequency out of range\n"); |
| 283 | freqs.new = dvfs_info->cur_frequency; |
| 284 | } |
| 285 | cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); |
| 286 | |
| 287 | cpufreq_cpu_put(policy); |
| 288 | mutex_unlock(&cpufreq_lock); |
| 289 | skip_work: |
| 290 | enable_irq(dvfs_info->irq); |
| 291 | } |
| 292 | |
| 293 | static irqreturn_t exynos_cpufreq_irq(int irq, void *id) |
| 294 | { |
| 295 | unsigned int tmp; |
| 296 | |
| 297 | tmp = __raw_readl(dvfs_info->base + XMU_PMUIRQ); |
| 298 | if (tmp >> PSTATE_CHANGED_SHIFT & 0x1) { |
| 299 | __raw_writel(tmp, dvfs_info->base + XMU_PMUIRQ); |
| 300 | disable_irq_nosync(irq); |
| 301 | schedule_work(&dvfs_info->irq_work); |
| 302 | } |
| 303 | return IRQ_HANDLED; |
| 304 | } |
| 305 | |
| 306 | static void exynos_sort_descend_freq_table(void) |
| 307 | { |
| 308 | struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table; |
| 309 | int i = 0, index; |
| 310 | unsigned int tmp_freq; |
| 311 | /* |
| 312 | * Exynos5440 clock controller state logic expects the cpufreq table to |
| 313 | * be in descending order. But the OPP library constructs the table in |
| 314 | * ascending order. So to make the table descending we just need to |
| 315 | * swap the i element with the N - i element. |
| 316 | */ |
| 317 | for (i = 0; i < dvfs_info->freq_count / 2; i++) { |
| 318 | index = dvfs_info->freq_count - i - 1; |
| 319 | tmp_freq = freq_tbl[i].frequency; |
| 320 | freq_tbl[i].frequency = freq_tbl[index].frequency; |
| 321 | freq_tbl[index].frequency = tmp_freq; |
| 322 | } |
| 323 | } |
| 324 | |
| 325 | static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) |
| 326 | { |
| 327 | int ret; |
| 328 | |
| 329 | ret = cpufreq_frequency_table_cpuinfo(policy, dvfs_info->freq_table); |
| 330 | if (ret) { |
| 331 | dev_err(dvfs_info->dev, "Invalid frequency table: %d\n", ret); |
| 332 | return ret; |
| 333 | } |
| 334 | |
| 335 | policy->cur = dvfs_info->cur_frequency; |
| 336 | policy->cpuinfo.transition_latency = dvfs_info->latency; |
| 337 | cpumask_setall(policy->cpus); |
| 338 | |
| 339 | cpufreq_frequency_table_get_attr(dvfs_info->freq_table, policy->cpu); |
| 340 | |
| 341 | return 0; |
| 342 | } |
| 343 | |
| 344 | static struct cpufreq_driver exynos_driver = { |
| 345 | .flags = CPUFREQ_STICKY, |
| 346 | .verify = exynos_verify_speed, |
| 347 | .target = exynos_target, |
| 348 | .get = exynos_getspeed, |
| 349 | .init = exynos_cpufreq_cpu_init, |
| 350 | .name = CPUFREQ_NAME, |
| 351 | }; |
| 352 | |
| 353 | static const struct of_device_id exynos_cpufreq_match[] = { |
| 354 | { |
| 355 | .compatible = "samsung,exynos5440-cpufreq", |
| 356 | }, |
| 357 | {}, |
| 358 | }; |
| 359 | MODULE_DEVICE_TABLE(of, exynos_cpufreq_match); |
| 360 | |
| 361 | static int exynos_cpufreq_probe(struct platform_device *pdev) |
| 362 | { |
| 363 | int ret = -EINVAL; |
| 364 | struct device_node *np; |
| 365 | struct resource res; |
| 366 | |
| 367 | np = pdev->dev.of_node; |
| 368 | if (!np) |
| 369 | return -ENODEV; |
| 370 | |
| 371 | dvfs_info = devm_kzalloc(&pdev->dev, sizeof(*dvfs_info), GFP_KERNEL); |
| 372 | if (!dvfs_info) { |
| 373 | ret = -ENOMEM; |
| 374 | goto err_put_node; |
| 375 | } |
| 376 | |
| 377 | dvfs_info->dev = &pdev->dev; |
| 378 | |
| 379 | ret = of_address_to_resource(np, 0, &res); |
| 380 | if (ret) |
| 381 | goto err_put_node; |
| 382 | |
| 383 | dvfs_info->base = devm_ioremap_resource(dvfs_info->dev, &res); |
| 384 | if (IS_ERR(dvfs_info->base)) { |
| 385 | ret = PTR_ERR(dvfs_info->base); |
| 386 | goto err_put_node; |
| 387 | } |
| 388 | |
| 389 | dvfs_info->irq = irq_of_parse_and_map(np, 0); |
| 390 | if (!dvfs_info->irq) { |
| 391 | dev_err(dvfs_info->dev, "No cpufreq irq found\n"); |
| 392 | ret = -ENODEV; |
| 393 | goto err_put_node; |
| 394 | } |
| 395 | |
| 396 | ret = of_init_opp_table(dvfs_info->dev); |
| 397 | if (ret) { |
| 398 | dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret); |
| 399 | goto err_put_node; |
| 400 | } |
| 401 | |
| 402 | ret = opp_init_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); |
| 403 | if (ret) { |
| 404 | dev_err(dvfs_info->dev, |
| 405 | "failed to init cpufreq table: %d\n", ret); |
| 406 | goto err_put_node; |
| 407 | } |
| 408 | dvfs_info->freq_count = opp_get_opp_count(dvfs_info->dev); |
| 409 | exynos_sort_descend_freq_table(); |
| 410 | |
| 411 | if (of_property_read_u32(np, "clock-latency", &dvfs_info->latency)) |
| 412 | dvfs_info->latency = DEF_TRANS_LATENCY; |
| 413 | |
| 414 | dvfs_info->cpu_clk = devm_clk_get(dvfs_info->dev, "armclk"); |
| 415 | if (IS_ERR(dvfs_info->cpu_clk)) { |
| 416 | dev_err(dvfs_info->dev, "Failed to get cpu clock\n"); |
| 417 | ret = PTR_ERR(dvfs_info->cpu_clk); |
| 418 | goto err_free_table; |
| 419 | } |
| 420 | |
| 421 | dvfs_info->cur_frequency = clk_get_rate(dvfs_info->cpu_clk); |
| 422 | if (!dvfs_info->cur_frequency) { |
| 423 | dev_err(dvfs_info->dev, "Failed to get clock rate\n"); |
| 424 | ret = -EINVAL; |
| 425 | goto err_free_table; |
| 426 | } |
| 427 | dvfs_info->cur_frequency /= 1000; |
| 428 | |
| 429 | INIT_WORK(&dvfs_info->irq_work, exynos_cpufreq_work); |
| 430 | ret = devm_request_irq(dvfs_info->dev, dvfs_info->irq, |
| 431 | exynos_cpufreq_irq, IRQF_TRIGGER_NONE, |
| 432 | CPUFREQ_NAME, dvfs_info); |
| 433 | if (ret) { |
| 434 | dev_err(dvfs_info->dev, "Failed to register IRQ\n"); |
| 435 | goto err_free_table; |
| 436 | } |
| 437 | |
| 438 | ret = init_div_table(); |
| 439 | if (ret) { |
| 440 | dev_err(dvfs_info->dev, "Failed to initialise div table\n"); |
| 441 | goto err_free_table; |
| 442 | } |
| 443 | |
| 444 | exynos_enable_dvfs(); |
| 445 | ret = cpufreq_register_driver(&exynos_driver); |
| 446 | if (ret) { |
| 447 | dev_err(dvfs_info->dev, |
| 448 | "%s: failed to register cpufreq driver\n", __func__); |
| 449 | goto err_free_table; |
| 450 | } |
| 451 | |
| 452 | of_node_put(np); |
| 453 | dvfs_info->dvfs_enabled = true; |
| 454 | return 0; |
| 455 | |
| 456 | err_free_table: |
| 457 | opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); |
| 458 | err_put_node: |
| 459 | of_node_put(np); |
Sachin Kamat | 116decb | 2013-09-18 10:44:53 +0530 | [diff] [blame] | 460 | dev_err(&pdev->dev, "%s: failed initialization\n", __func__); |
Amit Daniel Kachhap | 49d7b5b | 2013-04-08 09:57:34 +0000 | [diff] [blame] | 461 | return ret; |
| 462 | } |
| 463 | |
| 464 | static int exynos_cpufreq_remove(struct platform_device *pdev) |
| 465 | { |
| 466 | cpufreq_unregister_driver(&exynos_driver); |
| 467 | opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table); |
| 468 | return 0; |
| 469 | } |
| 470 | |
| 471 | static struct platform_driver exynos_cpufreq_platdrv = { |
| 472 | .driver = { |
| 473 | .name = "exynos5440-cpufreq", |
| 474 | .owner = THIS_MODULE, |
| 475 | .of_match_table = exynos_cpufreq_match, |
| 476 | }, |
| 477 | .probe = exynos_cpufreq_probe, |
| 478 | .remove = exynos_cpufreq_remove, |
| 479 | }; |
| 480 | module_platform_driver(exynos_cpufreq_platdrv); |
| 481 | |
| 482 | MODULE_AUTHOR("Amit Daniel Kachhap <amit.daniel@samsung.com>"); |
| 483 | MODULE_DESCRIPTION("Exynos5440 cpufreq driver"); |
| 484 | MODULE_LICENSE("GPL"); |