blob: 205e64c5ddeea4baee62209e3e45067062c17afb [file] [log] [blame]
Ludovic Desroches655ff2662013-03-22 13:24:13 +00001/*
2 * sama5d3xmb.dts - Device Tree file for SAMA5D3x mother board
3 *
4 * Copyright (C) 2013 Atmel,
5 * 2013 Ludovic Desroches <ludovic.desroches@atmel.com>
6 *
7 * Licensed under GPLv2 or later.
8 */
Jean-Christophe PLAGNIOL-VILLARD6db64d22013-05-15 01:21:50 +08009#include "sama5d3xcm.dtsi"
Ludovic Desroches655ff2662013-03-22 13:24:13 +000010
11/ {
12 compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
13
14 ahb {
15 apb {
16 mmc0: mmc@f0000000 {
17 pinctrl-names = "default";
18 pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
19 status = "okay";
20 slot@0 {
21 reg = <0>;
22 bus-width = <4>;
Jean-Christophe PLAGNIOL-VILLARD92f86292013-04-24 08:34:25 +080023 cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
Ludovic Desroches655ff2662013-03-22 13:24:13 +000024 };
25 };
26
27 spi0: spi@f0004000 {
28 m25p80@0 {
29 compatible = "atmel,at25df321a";
30 spi-max-frequency = <50000000>;
31 reg = <0>;
32 };
33 };
34
35 /*
36 * i2c0 conflicts with ISI:
37 * disable it to allow the use of ISI
38 * can not enable audio when i2c0 disabled
39 */
40 i2c0: i2c@f0014000 {
41 wm8904: wm8904@1a {
42 compatible = "wm8904";
43 reg = <0x1a>;
44 };
45 };
46
47 usart1: serial@f0020000 {
48 pinctrl-names = "default";
49 pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
50 status = "okay";
51 };
52
53 isi: isi@f0034000 {
54 pinctrl-names = "default";
55 pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
56 };
57
58 mmc1: mmc@f8000000 {
59 pinctrl-names = "default";
60 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
61 status = "okay";
62 slot@0 {
63 reg = <0>;
64 bus-width = <4>;
Jean-Christophe PLAGNIOL-VILLARD92f86292013-04-24 08:34:25 +080065 cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
Ludovic Desroches655ff2662013-03-22 13:24:13 +000066 };
67 };
68
69 adc0: adc@f8018000 {
70 pinctrl-names = "default";
71 pinctrl-0 = <
72 &pinctrl_adc0_adtrg
73 &pinctrl_adc0_ad0
74 &pinctrl_adc0_ad1
75 &pinctrl_adc0_ad2
76 &pinctrl_adc0_ad3
77 &pinctrl_adc0_ad4
78 >;
79 status = "okay";
80 };
81
82 macb1: ethernet@f802c000 {
83 phy-mode = "rmii";
84 };
85
86 pinctrl@fffff200 {
87 board {
88 pinctrl_mmc0_cd: mmc0_cd {
89 atmel,pins =
90 <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */
91 };
92
93 pinctrl_mmc1_cd: mmc1_cd {
94 atmel,pins =
95 <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */
96 };
97
98 pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
99 atmel,pins =
100 <3 30 0x2 0x0>; /* PD30 periph B */
101 };
102
103 pinctrl_isi_reset: isi_reset-0 {
104 atmel,pins =
105 <4 24 0x0 0x0>; /* PE24 gpio */
106 };
107
108 pinctrl_isi_power: isi_power-0 {
109 atmel,pins =
110 <4 29 0x0 0x0>; /* PE29 gpio */
111 };
112
113 pinctrl_usba_vbus: usba_vbus {
114 atmel,pins =
115 <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */
116 };
117 };
118 };
119
120 dbgu: serial@ffffee00 {
121 status = "okay";
122 };
123
124 watchdog@fffffe40 {
125 status = "okay";
126 };
127 };
128
129 usb0: gadget@00500000 {
Jean-Christophe PLAGNIOL-VILLARD92f86292013-04-24 08:34:25 +0800130 atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
Ludovic Desroches655ff2662013-03-22 13:24:13 +0000131 pinctrl-names = "default";
132 pinctrl-0 = <&pinctrl_usba_vbus>;
133 status = "okay";
134 };
135
136 usb1: ohci@00600000 {
137 num-ports = <3>;
Jean-Christophe PLAGNIOL-VILLARD92f86292013-04-24 08:34:25 +0800138 atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
139 &pioD 26 GPIO_ACTIVE_LOW
140 &pioD 27 GPIO_ACTIVE_LOW
Ludovic Desroches655ff2662013-03-22 13:24:13 +0000141 >;
142 status = "okay";
143 };
144
145 usb2: ehci@00700000 {
146 status = "okay";
147 };
148 };
149
150 sound {
151 compatible = "atmel,sama5d3ek-wm8904";
152 pinctrl-names = "default";
153 pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
154
155 atmel,model = "wm8904 @ SAMA5D3EK";
156 atmel,audio-routing =
157 "Headphone Jack", "HPOUTL",
158 "Headphone Jack", "HPOUTR",
159 "IN2L", "Line In Jack",
160 "IN2R", "Line In Jack",
161 "IN1L", "Mic";
162
163 atmel,ssc-controller = <&ssc0>;
164 atmel,audio-codec = <&wm8904>;
165 };
166};