blob: d83134b0f78a03ff7ed2c429be95735fb88da68f [file] [log] [blame]
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001/*
2 * printer.c -- Printer gadget driver
3 *
4 * Copyright (C) 2003-2005 David Brownell
5 * Copyright (C) 2006 Craig W. Nadler
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
Craig W. Nadler25a010c2007-11-11 15:00:15 -080011 */
12
13#include <linux/module.h>
14#include <linux/kernel.h>
15#include <linux/delay.h>
16#include <linux/ioport.h>
17#include <linux/sched.h>
18#include <linux/slab.h>
Arnd Bergmann925ce682010-07-11 23:18:56 +020019#include <linux/mutex.h>
Craig W. Nadler25a010c2007-11-11 15:00:15 -080020#include <linux/errno.h>
21#include <linux/init.h>
22#include <linux/timer.h>
23#include <linux/list.h>
24#include <linux/interrupt.h>
25#include <linux/utsname.h>
26#include <linux/device.h>
27#include <linux/moduleparam.h>
28#include <linux/fs.h>
29#include <linux/poll.h>
30#include <linux/types.h>
31#include <linux/ctype.h>
32#include <linux/cdev.h>
33
34#include <asm/byteorder.h>
35#include <linux/io.h>
36#include <linux/irq.h>
37#include <asm/system.h>
38#include <linux/uaccess.h>
39#include <asm/unaligned.h>
40
41#include <linux/usb/ch9.h>
42#include <linux/usb/gadget.h>
43#include <linux/usb/g_printer.h>
44
45#include "gadget_chips.h"
46
David Brownell0a56b032008-08-18 17:42:49 -070047
48/*
49 * Kbuild is not very cooperative with respect to linking separately
50 * compiled library objects into one module. So for now we won't use
51 * separate compilation ... ensuring init/exit sections work to shrink
52 * the runtime footprint, and giving us at least some parts of what
53 * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
54 */
55#include "usbstring.c"
56#include "config.c"
57#include "epautoconf.c"
58
59/*-------------------------------------------------------------------------*/
60
Craig W. Nadler25a010c2007-11-11 15:00:15 -080061#define DRIVER_DESC "Printer Gadget"
62#define DRIVER_VERSION "2007 OCT 06"
63
Arnd Bergmann925ce682010-07-11 23:18:56 +020064static DEFINE_MUTEX(printer_mutex);
Craig W. Nadler25a010c2007-11-11 15:00:15 -080065static const char shortname [] = "printer";
66static const char driver_desc [] = DRIVER_DESC;
67
68static dev_t g_printer_devno;
69
70static struct class *usb_gadget_class;
71
72/*-------------------------------------------------------------------------*/
73
74struct printer_dev {
75 spinlock_t lock; /* lock this structure */
76 /* lock buffer lists during read/write calls */
Jiri Slaby10ca4422010-06-21 17:02:40 +020077 struct mutex lock_printer_io;
Craig W. Nadler25a010c2007-11-11 15:00:15 -080078 struct usb_gadget *gadget;
79 struct usb_request *req; /* for control responses */
80 u8 config;
81 s8 interface;
82 struct usb_ep *in_ep, *out_ep;
Tatyana Brokhman72c973d2011-06-28 16:33:48 +030083
Craig W. Nadler25a010c2007-11-11 15:00:15 -080084 struct list_head rx_reqs; /* List of free RX structs */
85 struct list_head rx_reqs_active; /* List of Active RX xfers */
86 struct list_head rx_buffers; /* List of completed xfers */
87 /* wait until there is data to be read. */
88 wait_queue_head_t rx_wait;
89 struct list_head tx_reqs; /* List of free TX structs */
90 struct list_head tx_reqs_active; /* List of Active TX xfers */
91 /* Wait until there are write buffers available to use. */
92 wait_queue_head_t tx_wait;
93 /* Wait until all write buffers have been sent. */
94 wait_queue_head_t tx_flush_wait;
95 struct usb_request *current_rx_req;
96 size_t current_rx_bytes;
97 u8 *current_rx_buf;
98 u8 printer_status;
99 u8 reset_printer;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800100 struct cdev printer_cdev;
101 struct device *pdev;
102 u8 printer_cdev_open;
103 wait_queue_head_t wait;
104};
105
106static struct printer_dev usb_printer_gadget;
107
108/*-------------------------------------------------------------------------*/
109
110/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
111 * Instead: allocate your own, using normal USB-IF procedures.
112 */
113
114/* Thanks to NetChip Technologies for donating this product ID.
115 */
116#define PRINTER_VENDOR_NUM 0x0525 /* NetChip */
117#define PRINTER_PRODUCT_NUM 0xa4a8 /* Linux-USB Printer Gadget */
118
Lucas De Marchi25985ed2011-03-30 22:57:33 -0300119/* Some systems will want different product identifiers published in the
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800120 * device descriptor, either numbers or strings or both. These string
121 * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
122 */
123
Alan Sternad84e4a2011-01-10 11:24:14 -0500124static ushort idVendor;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800125module_param(idVendor, ushort, S_IRUGO);
126MODULE_PARM_DESC(idVendor, "USB Vendor ID");
127
Alan Sternad84e4a2011-01-10 11:24:14 -0500128static ushort idProduct;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800129module_param(idProduct, ushort, S_IRUGO);
130MODULE_PARM_DESC(idProduct, "USB Product ID");
131
Alan Sternad84e4a2011-01-10 11:24:14 -0500132static ushort bcdDevice;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800133module_param(bcdDevice, ushort, S_IRUGO);
134MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
135
Alan Sternad84e4a2011-01-10 11:24:14 -0500136static char *iManufacturer;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800137module_param(iManufacturer, charp, S_IRUGO);
138MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
139
Alan Sternad84e4a2011-01-10 11:24:14 -0500140static char *iProduct;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800141module_param(iProduct, charp, S_IRUGO);
142MODULE_PARM_DESC(iProduct, "USB Product string");
143
Alan Sternad84e4a2011-01-10 11:24:14 -0500144static char *iSerialNum;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800145module_param(iSerialNum, charp, S_IRUGO);
146MODULE_PARM_DESC(iSerialNum, "1");
147
Alan Sternad84e4a2011-01-10 11:24:14 -0500148static char *iPNPstring;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800149module_param(iPNPstring, charp, S_IRUGO);
150MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
151
152/* Number of requests to allocate per endpoint, not used for ep0. */
153static unsigned qlen = 10;
154module_param(qlen, uint, S_IRUGO|S_IWUSR);
155
156#define QLEN qlen
157
158#ifdef CONFIG_USB_GADGET_DUALSPEED
159#define DEVSPEED USB_SPEED_HIGH
160#else /* full speed (low speed doesn't do bulk) */
161#define DEVSPEED USB_SPEED_FULL
162#endif
163
164/*-------------------------------------------------------------------------*/
165
166#define xprintk(d, level, fmt, args...) \
167 printk(level "%s: " fmt, DRIVER_DESC, ## args)
168
169#ifdef DEBUG
170#define DBG(dev, fmt, args...) \
171 xprintk(dev, KERN_DEBUG, fmt, ## args)
172#else
173#define DBG(dev, fmt, args...) \
174 do { } while (0)
175#endif /* DEBUG */
176
177#ifdef VERBOSE
178#define VDBG(dev, fmt, args...) \
179 xprintk(dev, KERN_DEBUG, fmt, ## args)
180#else
181#define VDBG(dev, fmt, args...) \
182 do { } while (0)
183#endif /* VERBOSE */
184
185#define ERROR(dev, fmt, args...) \
186 xprintk(dev, KERN_ERR, fmt, ## args)
Arjan van de Venb6c63932008-07-25 01:45:52 -0700187#define WARNING(dev, fmt, args...) \
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800188 xprintk(dev, KERN_WARNING, fmt, ## args)
189#define INFO(dev, fmt, args...) \
190 xprintk(dev, KERN_INFO, fmt, ## args)
191
192/*-------------------------------------------------------------------------*/
193
194/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly
195 * ep0 implementation: descriptors, config management, setup().
196 * also optional class-specific notification interrupt transfer.
197 */
198
199/*
200 * DESCRIPTORS ... most are static, but strings and (full) configuration
201 * descriptors are built on demand.
202 */
203
204#define STRING_MANUFACTURER 1
205#define STRING_PRODUCT 2
206#define STRING_SERIALNUM 3
207
208/* holds our biggest descriptor */
209#define USB_DESC_BUFSIZE 256
210#define USB_BUFSIZE 8192
211
212/* This device advertises one configuration. */
213#define DEV_CONFIG_VALUE 1
214#define PRINTER_INTERFACE 0
215
216static struct usb_device_descriptor device_desc = {
217 .bLength = sizeof device_desc,
218 .bDescriptorType = USB_DT_DEVICE,
Harvey Harrison551509d2009-02-11 14:11:36 -0800219 .bcdUSB = cpu_to_le16(0x0200),
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800220 .bDeviceClass = USB_CLASS_PER_INTERFACE,
221 .bDeviceSubClass = 0,
222 .bDeviceProtocol = 0,
Harvey Harrison551509d2009-02-11 14:11:36 -0800223 .idVendor = cpu_to_le16(PRINTER_VENDOR_NUM),
224 .idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM),
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800225 .iManufacturer = STRING_MANUFACTURER,
226 .iProduct = STRING_PRODUCT,
227 .iSerialNumber = STRING_SERIALNUM,
228 .bNumConfigurations = 1
229};
230
231static struct usb_otg_descriptor otg_desc = {
232 .bLength = sizeof otg_desc,
233 .bDescriptorType = USB_DT_OTG,
234 .bmAttributes = USB_OTG_SRP
235};
236
237static struct usb_config_descriptor config_desc = {
238 .bLength = sizeof config_desc,
239 .bDescriptorType = USB_DT_CONFIG,
240
241 /* compute wTotalLength on the fly */
242 .bNumInterfaces = 1,
243 .bConfigurationValue = DEV_CONFIG_VALUE,
244 .iConfiguration = 0,
245 .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
David Brownell36e893d2008-09-12 09:39:06 -0700246 .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800247};
248
249static struct usb_interface_descriptor intf_desc = {
250 .bLength = sizeof intf_desc,
251 .bDescriptorType = USB_DT_INTERFACE,
252 .bInterfaceNumber = PRINTER_INTERFACE,
253 .bNumEndpoints = 2,
254 .bInterfaceClass = USB_CLASS_PRINTER,
255 .bInterfaceSubClass = 1, /* Printer Sub-Class */
256 .bInterfaceProtocol = 2, /* Bi-Directional */
257 .iInterface = 0
258};
259
260static struct usb_endpoint_descriptor fs_ep_in_desc = {
261 .bLength = USB_DT_ENDPOINT_SIZE,
262 .bDescriptorType = USB_DT_ENDPOINT,
263 .bEndpointAddress = USB_DIR_IN,
264 .bmAttributes = USB_ENDPOINT_XFER_BULK
265};
266
267static struct usb_endpoint_descriptor fs_ep_out_desc = {
268 .bLength = USB_DT_ENDPOINT_SIZE,
269 .bDescriptorType = USB_DT_ENDPOINT,
270 .bEndpointAddress = USB_DIR_OUT,
271 .bmAttributes = USB_ENDPOINT_XFER_BULK
272};
273
274static const struct usb_descriptor_header *fs_printer_function [11] = {
275 (struct usb_descriptor_header *) &otg_desc,
276 (struct usb_descriptor_header *) &intf_desc,
277 (struct usb_descriptor_header *) &fs_ep_in_desc,
278 (struct usb_descriptor_header *) &fs_ep_out_desc,
279 NULL
280};
281
282#ifdef CONFIG_USB_GADGET_DUALSPEED
283
284/*
285 * usb 2.0 devices need to expose both high speed and full speed
286 * descriptors, unless they only run at full speed.
287 */
288
289static struct usb_endpoint_descriptor hs_ep_in_desc = {
290 .bLength = USB_DT_ENDPOINT_SIZE,
291 .bDescriptorType = USB_DT_ENDPOINT,
292 .bmAttributes = USB_ENDPOINT_XFER_BULK,
Harvey Harrison551509d2009-02-11 14:11:36 -0800293 .wMaxPacketSize = cpu_to_le16(512)
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800294};
295
296static struct usb_endpoint_descriptor hs_ep_out_desc = {
297 .bLength = USB_DT_ENDPOINT_SIZE,
298 .bDescriptorType = USB_DT_ENDPOINT,
299 .bmAttributes = USB_ENDPOINT_XFER_BULK,
Harvey Harrison551509d2009-02-11 14:11:36 -0800300 .wMaxPacketSize = cpu_to_le16(512)
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800301};
302
303static struct usb_qualifier_descriptor dev_qualifier = {
304 .bLength = sizeof dev_qualifier,
305 .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
Harvey Harrison551509d2009-02-11 14:11:36 -0800306 .bcdUSB = cpu_to_le16(0x0200),
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800307 .bDeviceClass = USB_CLASS_PRINTER,
308 .bNumConfigurations = 1
309};
310
311static const struct usb_descriptor_header *hs_printer_function [11] = {
312 (struct usb_descriptor_header *) &otg_desc,
313 (struct usb_descriptor_header *) &intf_desc,
314 (struct usb_descriptor_header *) &hs_ep_in_desc,
315 (struct usb_descriptor_header *) &hs_ep_out_desc,
316 NULL
317};
318
319/* maxpacket and other transfer characteristics vary by speed. */
320#define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs))
321
322#else
323
324/* if there's no high speed support, maxpacket doesn't change. */
325#define ep_desc(g, hs, fs) (((void)(g)), (fs))
326
327#endif /* !CONFIG_USB_GADGET_DUALSPEED */
328
329/*-------------------------------------------------------------------------*/
330
331/* descriptors that are built on-demand */
332
333static char manufacturer [50];
334static char product_desc [40] = DRIVER_DESC;
335static char serial_num [40] = "1";
336static char pnp_string [1024] =
337 "XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
338
339/* static strings, in UTF-8 */
340static struct usb_string strings [] = {
341 { STRING_MANUFACTURER, manufacturer, },
342 { STRING_PRODUCT, product_desc, },
343 { STRING_SERIALNUM, serial_num, },
344 { } /* end of list */
345};
346
347static struct usb_gadget_strings stringtab = {
348 .language = 0x0409, /* en-us */
349 .strings = strings,
350};
351
352/*-------------------------------------------------------------------------*/
353
354static struct usb_request *
355printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
356{
357 struct usb_request *req;
358
359 req = usb_ep_alloc_request(ep, gfp_flags);
360
361 if (req != NULL) {
362 req->length = len;
363 req->buf = kmalloc(len, gfp_flags);
364 if (req->buf == NULL) {
365 usb_ep_free_request(ep, req);
366 return NULL;
367 }
368 }
369
370 return req;
371}
372
373static void
374printer_req_free(struct usb_ep *ep, struct usb_request *req)
375{
376 if (ep != NULL && req != NULL) {
377 kfree(req->buf);
378 usb_ep_free_request(ep, req);
379 }
380}
381
382/*-------------------------------------------------------------------------*/
383
384static void rx_complete(struct usb_ep *ep, struct usb_request *req)
385{
386 struct printer_dev *dev = ep->driver_data;
387 int status = req->status;
388 unsigned long flags;
389
390 spin_lock_irqsave(&dev->lock, flags);
391
392 list_del_init(&req->list); /* Remode from Active List */
393
394 switch (status) {
395
396 /* normal completion */
397 case 0:
Craig W. Nadlercc901bb2008-03-20 14:46:26 -0700398 if (req->actual > 0) {
399 list_add_tail(&req->list, &dev->rx_buffers);
400 DBG(dev, "G_Printer : rx length %d\n", req->actual);
401 } else {
402 list_add(&req->list, &dev->rx_reqs);
403 }
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800404 break;
405
406 /* software-driven interface shutdown */
407 case -ECONNRESET: /* unlink */
408 case -ESHUTDOWN: /* disconnect etc */
409 VDBG(dev, "rx shutdown, code %d\n", status);
410 list_add(&req->list, &dev->rx_reqs);
411 break;
412
413 /* for hardware automagic (such as pxa) */
414 case -ECONNABORTED: /* endpoint reset */
415 DBG(dev, "rx %s reset\n", ep->name);
416 list_add(&req->list, &dev->rx_reqs);
417 break;
418
419 /* data overrun */
420 case -EOVERFLOW:
421 /* FALLTHROUGH */
422
423 default:
424 DBG(dev, "rx status %d\n", status);
425 list_add(&req->list, &dev->rx_reqs);
426 break;
427 }
Craig W. Nadlercc901bb2008-03-20 14:46:26 -0700428
429 wake_up_interruptible(&dev->rx_wait);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800430 spin_unlock_irqrestore(&dev->lock, flags);
431}
432
433static void tx_complete(struct usb_ep *ep, struct usb_request *req)
434{
435 struct printer_dev *dev = ep->driver_data;
436
437 switch (req->status) {
438 default:
439 VDBG(dev, "tx err %d\n", req->status);
440 /* FALLTHROUGH */
441 case -ECONNRESET: /* unlink */
442 case -ESHUTDOWN: /* disconnect etc */
443 break;
444 case 0:
445 break;
446 }
447
448 spin_lock(&dev->lock);
449 /* Take the request struct off the active list and put it on the
450 * free list.
451 */
452 list_del_init(&req->list);
453 list_add(&req->list, &dev->tx_reqs);
454 wake_up_interruptible(&dev->tx_wait);
455 if (likely(list_empty(&dev->tx_reqs_active)))
456 wake_up_interruptible(&dev->tx_flush_wait);
457
458 spin_unlock(&dev->lock);
459}
460
461/*-------------------------------------------------------------------------*/
462
463static int
464printer_open(struct inode *inode, struct file *fd)
465{
466 struct printer_dev *dev;
467 unsigned long flags;
468 int ret = -EBUSY;
469
Arnd Bergmann925ce682010-07-11 23:18:56 +0200470 mutex_lock(&printer_mutex);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800471 dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
472
473 spin_lock_irqsave(&dev->lock, flags);
474
475 if (!dev->printer_cdev_open) {
476 dev->printer_cdev_open = 1;
477 fd->private_data = dev;
478 ret = 0;
479 /* Change the printer status to show that it's on-line. */
480 dev->printer_status |= PRINTER_SELECTED;
481 }
482
483 spin_unlock_irqrestore(&dev->lock, flags);
484
485 DBG(dev, "printer_open returned %x\n", ret);
Arnd Bergmann925ce682010-07-11 23:18:56 +0200486 mutex_unlock(&printer_mutex);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800487 return ret;
488}
489
490static int
491printer_close(struct inode *inode, struct file *fd)
492{
493 struct printer_dev *dev = fd->private_data;
494 unsigned long flags;
495
496 spin_lock_irqsave(&dev->lock, flags);
497 dev->printer_cdev_open = 0;
498 fd->private_data = NULL;
499 /* Change printer status to show that the printer is off-line. */
500 dev->printer_status &= ~PRINTER_SELECTED;
501 spin_unlock_irqrestore(&dev->lock, flags);
502
503 DBG(dev, "printer_close\n");
504
505 return 0;
506}
507
Craig W. Nadlercc901bb2008-03-20 14:46:26 -0700508/* This function must be called with interrupts turned off. */
509static void
510setup_rx_reqs(struct printer_dev *dev)
511{
512 struct usb_request *req;
513
514 while (likely(!list_empty(&dev->rx_reqs))) {
515 int error;
516
517 req = container_of(dev->rx_reqs.next,
518 struct usb_request, list);
519 list_del_init(&req->list);
520
521 /* The USB Host sends us whatever amount of data it wants to
522 * so we always set the length field to the full USB_BUFSIZE.
523 * If the amount of data is more than the read() caller asked
524 * for it will be stored in the request buffer until it is
525 * asked for by read().
526 */
527 req->length = USB_BUFSIZE;
528 req->complete = rx_complete;
529
530 error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
531 if (error) {
532 DBG(dev, "rx submit --> %d\n", error);
533 list_add(&req->list, &dev->rx_reqs);
534 break;
535 } else {
536 list_add(&req->list, &dev->rx_reqs_active);
537 }
538 }
539}
540
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800541static ssize_t
542printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
543{
544 struct printer_dev *dev = fd->private_data;
545 unsigned long flags;
546 size_t size;
547 size_t bytes_copied;
548 struct usb_request *req;
549 /* This is a pointer to the current USB rx request. */
550 struct usb_request *current_rx_req;
551 /* This is the number of bytes in the current rx buffer. */
552 size_t current_rx_bytes;
553 /* This is a pointer to the current rx buffer. */
554 u8 *current_rx_buf;
555
556 if (len == 0)
557 return -EINVAL;
558
559 DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
560
Jiri Slaby10ca4422010-06-21 17:02:40 +0200561 mutex_lock(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800562 spin_lock_irqsave(&dev->lock, flags);
563
564 /* We will use this flag later to check if a printer reset happened
565 * after we turn interrupts back on.
566 */
567 dev->reset_printer = 0;
568
Craig W. Nadlercc901bb2008-03-20 14:46:26 -0700569 setup_rx_reqs(dev);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800570
571 bytes_copied = 0;
572 current_rx_req = dev->current_rx_req;
573 current_rx_bytes = dev->current_rx_bytes;
574 current_rx_buf = dev->current_rx_buf;
575 dev->current_rx_req = NULL;
576 dev->current_rx_bytes = 0;
577 dev->current_rx_buf = NULL;
578
579 /* Check if there is any data in the read buffers. Please note that
580 * current_rx_bytes is the number of bytes in the current rx buffer.
581 * If it is zero then check if there are any other rx_buffers that
582 * are on the completed list. We are only out of data if all rx
583 * buffers are empty.
584 */
585 if ((current_rx_bytes == 0) &&
586 (likely(list_empty(&dev->rx_buffers)))) {
587 /* Turn interrupts back on before sleeping. */
588 spin_unlock_irqrestore(&dev->lock, flags);
589
590 /*
591 * If no data is available check if this is a NON-Blocking
592 * call or not.
593 */
594 if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
Jiri Slaby10ca4422010-06-21 17:02:40 +0200595 mutex_unlock(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800596 return -EAGAIN;
597 }
598
599 /* Sleep until data is available */
600 wait_event_interruptible(dev->rx_wait,
601 (likely(!list_empty(&dev->rx_buffers))));
602 spin_lock_irqsave(&dev->lock, flags);
603 }
604
605 /* We have data to return then copy it to the caller's buffer.*/
606 while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
607 && len) {
608 if (current_rx_bytes == 0) {
609 req = container_of(dev->rx_buffers.next,
610 struct usb_request, list);
611 list_del_init(&req->list);
612
613 if (req->actual && req->buf) {
614 current_rx_req = req;
615 current_rx_bytes = req->actual;
616 current_rx_buf = req->buf;
617 } else {
618 list_add(&req->list, &dev->rx_reqs);
619 continue;
620 }
621 }
622
623 /* Don't leave irqs off while doing memory copies */
624 spin_unlock_irqrestore(&dev->lock, flags);
625
626 if (len > current_rx_bytes)
627 size = current_rx_bytes;
628 else
629 size = len;
630
631 size -= copy_to_user(buf, current_rx_buf, size);
632 bytes_copied += size;
633 len -= size;
634 buf += size;
635
636 spin_lock_irqsave(&dev->lock, flags);
637
Craig W. Nadlercc901bb2008-03-20 14:46:26 -0700638 /* We've disconnected or reset so return. */
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800639 if (dev->reset_printer) {
Craig W. Nadlercc901bb2008-03-20 14:46:26 -0700640 list_add(&current_rx_req->list, &dev->rx_reqs);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800641 spin_unlock_irqrestore(&dev->lock, flags);
Jiri Slaby10ca4422010-06-21 17:02:40 +0200642 mutex_unlock(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800643 return -EAGAIN;
644 }
645
646 /* If we not returning all the data left in this RX request
647 * buffer then adjust the amount of data left in the buffer.
648 * Othewise if we are done with this RX request buffer then
649 * requeue it to get any incoming data from the USB host.
650 */
651 if (size < current_rx_bytes) {
652 current_rx_bytes -= size;
653 current_rx_buf += size;
654 } else {
655 list_add(&current_rx_req->list, &dev->rx_reqs);
656 current_rx_bytes = 0;
657 current_rx_buf = NULL;
658 current_rx_req = NULL;
659 }
660 }
661
662 dev->current_rx_req = current_rx_req;
663 dev->current_rx_bytes = current_rx_bytes;
664 dev->current_rx_buf = current_rx_buf;
665
666 spin_unlock_irqrestore(&dev->lock, flags);
Jiri Slaby10ca4422010-06-21 17:02:40 +0200667 mutex_unlock(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800668
669 DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
670
671 if (bytes_copied)
672 return bytes_copied;
673 else
674 return -EAGAIN;
675}
676
677static ssize_t
678printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
679{
680 struct printer_dev *dev = fd->private_data;
681 unsigned long flags;
682 size_t size; /* Amount of data in a TX request. */
683 size_t bytes_copied = 0;
684 struct usb_request *req;
685
686 DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
687
688 if (len == 0)
689 return -EINVAL;
690
Jiri Slaby10ca4422010-06-21 17:02:40 +0200691 mutex_lock(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800692 spin_lock_irqsave(&dev->lock, flags);
693
694 /* Check if a printer reset happens while we have interrupts on */
695 dev->reset_printer = 0;
696
697 /* Check if there is any available write buffers */
698 if (likely(list_empty(&dev->tx_reqs))) {
699 /* Turn interrupts back on before sleeping. */
700 spin_unlock_irqrestore(&dev->lock, flags);
701
702 /*
703 * If write buffers are available check if this is
704 * a NON-Blocking call or not.
705 */
706 if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
Jiri Slaby10ca4422010-06-21 17:02:40 +0200707 mutex_unlock(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800708 return -EAGAIN;
709 }
710
711 /* Sleep until a write buffer is available */
712 wait_event_interruptible(dev->tx_wait,
713 (likely(!list_empty(&dev->tx_reqs))));
714 spin_lock_irqsave(&dev->lock, flags);
715 }
716
717 while (likely(!list_empty(&dev->tx_reqs)) && len) {
718
719 if (len > USB_BUFSIZE)
720 size = USB_BUFSIZE;
721 else
722 size = len;
723
724 req = container_of(dev->tx_reqs.next, struct usb_request,
725 list);
726 list_del_init(&req->list);
727
728 req->complete = tx_complete;
729 req->length = size;
730
731 /* Check if we need to send a zero length packet. */
732 if (len > size)
733 /* They will be more TX requests so no yet. */
734 req->zero = 0;
735 else
736 /* If the data amount is not a multple of the
737 * maxpacket size then send a zero length packet.
738 */
739 req->zero = ((len % dev->in_ep->maxpacket) == 0);
740
741 /* Don't leave irqs off while doing memory copies */
742 spin_unlock_irqrestore(&dev->lock, flags);
743
744 if (copy_from_user(req->buf, buf, size)) {
745 list_add(&req->list, &dev->tx_reqs);
Jiri Slaby10ca4422010-06-21 17:02:40 +0200746 mutex_unlock(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800747 return bytes_copied;
748 }
749
750 bytes_copied += size;
751 len -= size;
752 buf += size;
753
754 spin_lock_irqsave(&dev->lock, flags);
755
756 /* We've disconnected or reset so free the req and buffer */
757 if (dev->reset_printer) {
Craig W. Nadlercc901bb2008-03-20 14:46:26 -0700758 list_add(&req->list, &dev->tx_reqs);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800759 spin_unlock_irqrestore(&dev->lock, flags);
Jiri Slaby10ca4422010-06-21 17:02:40 +0200760 mutex_unlock(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800761 return -EAGAIN;
762 }
763
764 if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
765 list_add(&req->list, &dev->tx_reqs);
766 spin_unlock_irqrestore(&dev->lock, flags);
Jiri Slaby10ca4422010-06-21 17:02:40 +0200767 mutex_unlock(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800768 return -EAGAIN;
769 }
770
771 list_add(&req->list, &dev->tx_reqs_active);
772
773 }
774
775 spin_unlock_irqrestore(&dev->lock, flags);
Jiri Slaby10ca4422010-06-21 17:02:40 +0200776 mutex_unlock(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800777
778 DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
779
780 if (bytes_copied) {
781 return bytes_copied;
782 } else {
783 return -EAGAIN;
784 }
785}
786
787static int
Josef Bacik02c24a82011-07-16 20:44:56 -0400788printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800789{
790 struct printer_dev *dev = fd->private_data;
Josef Bacik02c24a82011-07-16 20:44:56 -0400791 struct inode *inode = fd->f_path.dentry->d_inode;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800792 unsigned long flags;
793 int tx_list_empty;
794
Josef Bacik02c24a82011-07-16 20:44:56 -0400795 mutex_lock(&inode->i_mutex);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800796 spin_lock_irqsave(&dev->lock, flags);
797 tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
798 spin_unlock_irqrestore(&dev->lock, flags);
799
800 if (!tx_list_empty) {
801 /* Sleep until all data has been sent */
802 wait_event_interruptible(dev->tx_flush_wait,
803 (likely(list_empty(&dev->tx_reqs_active))));
804 }
Josef Bacik02c24a82011-07-16 20:44:56 -0400805 mutex_unlock(&inode->i_mutex);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800806
807 return 0;
808}
809
810static unsigned int
811printer_poll(struct file *fd, poll_table *wait)
812{
813 struct printer_dev *dev = fd->private_data;
814 unsigned long flags;
815 int status = 0;
816
Jiri Slaby10ca4422010-06-21 17:02:40 +0200817 mutex_lock(&dev->lock_printer_io);
Craig W. Nadlercc901bb2008-03-20 14:46:26 -0700818 spin_lock_irqsave(&dev->lock, flags);
819 setup_rx_reqs(dev);
820 spin_unlock_irqrestore(&dev->lock, flags);
Jiri Slaby10ca4422010-06-21 17:02:40 +0200821 mutex_unlock(&dev->lock_printer_io);
Craig W. Nadlercc901bb2008-03-20 14:46:26 -0700822
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800823 poll_wait(fd, &dev->rx_wait, wait);
824 poll_wait(fd, &dev->tx_wait, wait);
825
826 spin_lock_irqsave(&dev->lock, flags);
827 if (likely(!list_empty(&dev->tx_reqs)))
828 status |= POLLOUT | POLLWRNORM;
829
Craig W. Nadlercc901bb2008-03-20 14:46:26 -0700830 if (likely(dev->current_rx_bytes) ||
831 likely(!list_empty(&dev->rx_buffers)))
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800832 status |= POLLIN | POLLRDNORM;
833
834 spin_unlock_irqrestore(&dev->lock, flags);
835
836 return status;
837}
838
Alan Cox44c389a2008-05-22 22:03:27 +0100839static long
840printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800841{
842 struct printer_dev *dev = fd->private_data;
843 unsigned long flags;
844 int status = 0;
845
846 DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
847
848 /* handle ioctls */
849
850 spin_lock_irqsave(&dev->lock, flags);
851
852 switch (code) {
853 case GADGET_GET_PRINTER_STATUS:
854 status = (int)dev->printer_status;
855 break;
856 case GADGET_SET_PRINTER_STATUS:
857 dev->printer_status = (u8)arg;
858 break;
859 default:
860 /* could not handle ioctl */
861 DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
862 code);
863 status = -ENOTTY;
864 }
865
866 spin_unlock_irqrestore(&dev->lock, flags);
867
868 return status;
869}
870
871/* used after endpoint configuration */
Alexey Dobriyan828c0952009-10-01 15:43:56 -0700872static const struct file_operations printer_io_operations = {
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800873 .owner = THIS_MODULE,
874 .open = printer_open,
875 .read = printer_read,
876 .write = printer_write,
877 .fsync = printer_fsync,
878 .poll = printer_poll,
Alan Cox44c389a2008-05-22 22:03:27 +0100879 .unlocked_ioctl = printer_ioctl,
Arnd Bergmann6038f372010-08-15 18:52:59 +0200880 .release = printer_close,
881 .llseek = noop_llseek,
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800882};
883
884/*-------------------------------------------------------------------------*/
885
886static int
887set_printer_interface(struct printer_dev *dev)
888{
889 int result = 0;
890
Tatyana Brokhman72c973d2011-06-28 16:33:48 +0300891 dev->in_ep->desc = ep_desc(dev->gadget, &hs_ep_in_desc, &fs_ep_in_desc);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800892 dev->in_ep->driver_data = dev;
893
Tatyana Brokhman72c973d2011-06-28 16:33:48 +0300894 dev->out_ep->desc = ep_desc(dev->gadget, &hs_ep_out_desc,
895 &fs_ep_out_desc);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800896 dev->out_ep->driver_data = dev;
897
Tatyana Brokhman72c973d2011-06-28 16:33:48 +0300898 result = usb_ep_enable(dev->in_ep);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800899 if (result != 0) {
900 DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
901 goto done;
902 }
903
Tatyana Brokhman72c973d2011-06-28 16:33:48 +0300904 result = usb_ep_enable(dev->out_ep);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800905 if (result != 0) {
906 DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
907 goto done;
908 }
909
910done:
911 /* on error, disable any endpoints */
912 if (result != 0) {
913 (void) usb_ep_disable(dev->in_ep);
914 (void) usb_ep_disable(dev->out_ep);
Tatyana Brokhman72c973d2011-06-28 16:33:48 +0300915 dev->in_ep->desc = NULL;
916 dev->out_ep->desc = NULL;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800917 }
918
919 /* caller is responsible for cleanup on error */
920 return result;
921}
922
923static void printer_reset_interface(struct printer_dev *dev)
924{
925 if (dev->interface < 0)
926 return;
927
Harvey Harrison441b62c2008-03-03 16:08:34 -0800928 DBG(dev, "%s\n", __func__);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800929
Tatyana Brokhman72c973d2011-06-28 16:33:48 +0300930 if (dev->in_ep->desc)
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800931 usb_ep_disable(dev->in_ep);
932
Tatyana Brokhman72c973d2011-06-28 16:33:48 +0300933 if (dev->out_ep->desc)
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800934 usb_ep_disable(dev->out_ep);
935
Tatyana Brokhman72c973d2011-06-28 16:33:48 +0300936 dev->in_ep->desc = NULL;
937 dev->out_ep->desc = NULL;
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800938 dev->interface = -1;
939}
940
941/* change our operational config. must agree with the code
942 * that returns config descriptors, and altsetting code.
943 */
944static int
945printer_set_config(struct printer_dev *dev, unsigned number)
946{
947 int result = 0;
948 struct usb_gadget *gadget = dev->gadget;
949
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800950 switch (number) {
951 case DEV_CONFIG_VALUE:
952 result = 0;
953 break;
954 default:
955 result = -EINVAL;
956 /* FALL THROUGH */
957 case 0:
958 break;
959 }
960
961 if (result) {
962 usb_gadget_vbus_draw(dev->gadget,
963 dev->gadget->is_otg ? 8 : 100);
964 } else {
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800965 unsigned power;
966
967 power = 2 * config_desc.bMaxPower;
968 usb_gadget_vbus_draw(dev->gadget, power);
969
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800970 dev->config = number;
Michal Nazarewicze538dfd2011-08-30 17:11:19 +0200971 INFO(dev, "%s config #%d: %d mA, %s\n",
972 usb_speed_string(gadget->speed),
973 number, power, driver_desc);
Craig W. Nadler25a010c2007-11-11 15:00:15 -0800974 }
975 return result;
976}
977
978static int
979config_buf(enum usb_device_speed speed, u8 *buf, u8 type, unsigned index,
980 int is_otg)
981{
982 int len;
983 const struct usb_descriptor_header **function;
984#ifdef CONFIG_USB_GADGET_DUALSPEED
985 int hs = (speed == USB_SPEED_HIGH);
986
987 if (type == USB_DT_OTHER_SPEED_CONFIG)
988 hs = !hs;
989
990 if (hs) {
991 function = hs_printer_function;
992 } else {
993 function = fs_printer_function;
994 }
995#else
996 function = fs_printer_function;
997#endif
998
999 if (index >= device_desc.bNumConfigurations)
1000 return -EINVAL;
1001
1002 /* for now, don't advertise srp-only devices */
1003 if (!is_otg)
1004 function++;
1005
1006 len = usb_gadget_config_buf(&config_desc, buf, USB_DESC_BUFSIZE,
1007 function);
1008 if (len < 0)
1009 return len;
1010 ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
1011 return len;
1012}
1013
1014/* Change our operational Interface. */
1015static int
1016set_interface(struct printer_dev *dev, unsigned number)
1017{
1018 int result = 0;
1019
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001020 /* Free the current interface */
1021 switch (dev->interface) {
1022 case PRINTER_INTERFACE:
1023 printer_reset_interface(dev);
1024 break;
1025 }
1026
1027 switch (number) {
1028 case PRINTER_INTERFACE:
1029 result = set_printer_interface(dev);
1030 if (result) {
1031 printer_reset_interface(dev);
1032 } else {
1033 dev->interface = PRINTER_INTERFACE;
1034 }
1035 break;
1036 default:
1037 result = -EINVAL;
1038 /* FALL THROUGH */
1039 }
1040
1041 if (!result)
1042 INFO(dev, "Using interface %x\n", number);
1043
1044 return result;
1045}
1046
1047static void printer_setup_complete(struct usb_ep *ep, struct usb_request *req)
1048{
1049 if (req->status || req->actual != req->length)
1050 DBG((struct printer_dev *) ep->driver_data,
1051 "setup complete --> %d, %d/%d\n",
1052 req->status, req->actual, req->length);
1053}
1054
1055static void printer_soft_reset(struct printer_dev *dev)
1056{
1057 struct usb_request *req;
1058
1059 INFO(dev, "Received Printer Reset Request\n");
1060
1061 if (usb_ep_disable(dev->in_ep))
1062 DBG(dev, "Failed to disable USB in_ep\n");
1063 if (usb_ep_disable(dev->out_ep))
1064 DBG(dev, "Failed to disable USB out_ep\n");
1065
1066 if (dev->current_rx_req != NULL) {
1067 list_add(&dev->current_rx_req->list, &dev->rx_reqs);
1068 dev->current_rx_req = NULL;
1069 }
1070 dev->current_rx_bytes = 0;
1071 dev->current_rx_buf = NULL;
1072 dev->reset_printer = 1;
1073
1074 while (likely(!(list_empty(&dev->rx_buffers)))) {
1075 req = container_of(dev->rx_buffers.next, struct usb_request,
1076 list);
1077 list_del_init(&req->list);
1078 list_add(&req->list, &dev->rx_reqs);
1079 }
1080
1081 while (likely(!(list_empty(&dev->rx_reqs_active)))) {
1082 req = container_of(dev->rx_buffers.next, struct usb_request,
1083 list);
1084 list_del_init(&req->list);
1085 list_add(&req->list, &dev->rx_reqs);
1086 }
1087
1088 while (likely(!(list_empty(&dev->tx_reqs_active)))) {
1089 req = container_of(dev->tx_reqs_active.next,
1090 struct usb_request, list);
1091 list_del_init(&req->list);
1092 list_add(&req->list, &dev->tx_reqs);
1093 }
1094
Tatyana Brokhman72c973d2011-06-28 16:33:48 +03001095 if (usb_ep_enable(dev->in_ep))
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001096 DBG(dev, "Failed to enable USB in_ep\n");
Tatyana Brokhman72c973d2011-06-28 16:33:48 +03001097 if (usb_ep_enable(dev->out_ep))
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001098 DBG(dev, "Failed to enable USB out_ep\n");
1099
Craig W. Nadlercc901bb2008-03-20 14:46:26 -07001100 wake_up_interruptible(&dev->rx_wait);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001101 wake_up_interruptible(&dev->tx_wait);
1102 wake_up_interruptible(&dev->tx_flush_wait);
1103}
1104
1105/*-------------------------------------------------------------------------*/
1106
1107/*
1108 * The setup() callback implements all the ep0 functionality that's not
1109 * handled lower down.
1110 */
1111static int
1112printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
1113{
1114 struct printer_dev *dev = get_gadget_data(gadget);
1115 struct usb_request *req = dev->req;
1116 int value = -EOPNOTSUPP;
1117 u16 wIndex = le16_to_cpu(ctrl->wIndex);
1118 u16 wValue = le16_to_cpu(ctrl->wValue);
1119 u16 wLength = le16_to_cpu(ctrl->wLength);
1120
1121 DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
1122 ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
1123
1124 req->complete = printer_setup_complete;
1125
1126 switch (ctrl->bRequestType&USB_TYPE_MASK) {
1127
1128 case USB_TYPE_STANDARD:
1129 switch (ctrl->bRequest) {
1130
1131 case USB_REQ_GET_DESCRIPTOR:
1132 if (ctrl->bRequestType != USB_DIR_IN)
1133 break;
1134 switch (wValue >> 8) {
1135
1136 case USB_DT_DEVICE:
Sebastian Andrzej Siewior765f5b82011-06-23 14:26:11 +02001137 device_desc.bMaxPacketSize0 =
1138 gadget->ep0->maxpacket;
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001139 value = min(wLength, (u16) sizeof device_desc);
1140 memcpy(req->buf, &device_desc, value);
1141 break;
1142#ifdef CONFIG_USB_GADGET_DUALSPEED
1143 case USB_DT_DEVICE_QUALIFIER:
Michal Nazarewiczd327ab52011-11-19 18:27:37 +01001144 if (!gadget_is_dualspeed(gadget))
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001145 break;
Sebastian Andrzej Siewior765f5b82011-06-23 14:26:11 +02001146 /*
1147 * assumes ep0 uses the same value for both
1148 * speeds
1149 */
1150 dev_qualifier.bMaxPacketSize0 =
1151 gadget->ep0->maxpacket;
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001152 value = min(wLength,
1153 (u16) sizeof dev_qualifier);
1154 memcpy(req->buf, &dev_qualifier, value);
1155 break;
1156
1157 case USB_DT_OTHER_SPEED_CONFIG:
Michal Nazarewiczd327ab52011-11-19 18:27:37 +01001158 if (!gadget_is_dualspeed(gadget))
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001159 break;
1160 /* FALLTHROUGH */
1161#endif /* CONFIG_USB_GADGET_DUALSPEED */
1162 case USB_DT_CONFIG:
1163 value = config_buf(gadget->speed, req->buf,
1164 wValue >> 8,
1165 wValue & 0xff,
1166 gadget->is_otg);
1167 if (value >= 0)
1168 value = min(wLength, (u16) value);
1169 break;
1170
1171 case USB_DT_STRING:
1172 value = usb_gadget_get_string(&stringtab,
1173 wValue & 0xff, req->buf);
1174 if (value >= 0)
1175 value = min(wLength, (u16) value);
1176 break;
1177 }
1178 break;
1179
1180 case USB_REQ_SET_CONFIGURATION:
1181 if (ctrl->bRequestType != 0)
1182 break;
1183 if (gadget->a_hnp_support)
1184 DBG(dev, "HNP available\n");
1185 else if (gadget->a_alt_hnp_support)
1186 DBG(dev, "HNP needs a different root port\n");
1187 value = printer_set_config(dev, wValue);
Jonas Anderssona0c25c22011-03-21 14:54:09 +01001188 if (!value)
1189 value = set_interface(dev, PRINTER_INTERFACE);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001190 break;
1191 case USB_REQ_GET_CONFIGURATION:
1192 if (ctrl->bRequestType != USB_DIR_IN)
1193 break;
1194 *(u8 *)req->buf = dev->config;
1195 value = min(wLength, (u16) 1);
1196 break;
1197
1198 case USB_REQ_SET_INTERFACE:
1199 if (ctrl->bRequestType != USB_RECIP_INTERFACE ||
1200 !dev->config)
1201 break;
1202
1203 value = set_interface(dev, PRINTER_INTERFACE);
1204 break;
1205 case USB_REQ_GET_INTERFACE:
1206 if (ctrl->bRequestType !=
1207 (USB_DIR_IN|USB_RECIP_INTERFACE)
1208 || !dev->config)
1209 break;
1210
1211 *(u8 *)req->buf = dev->interface;
1212 value = min(wLength, (u16) 1);
1213 break;
1214
1215 default:
1216 goto unknown;
1217 }
1218 break;
1219
1220 case USB_TYPE_CLASS:
1221 switch (ctrl->bRequest) {
1222 case 0: /* Get the IEEE-1284 PNP String */
1223 /* Only one printer interface is supported. */
1224 if ((wIndex>>8) != PRINTER_INTERFACE)
1225 break;
1226
1227 value = (pnp_string[0]<<8)|pnp_string[1];
1228 memcpy(req->buf, pnp_string, value);
1229 DBG(dev, "1284 PNP String: %x %s\n", value,
1230 &pnp_string[2]);
1231 break;
1232
1233 case 1: /* Get Port Status */
1234 /* Only one printer interface is supported. */
1235 if (wIndex != PRINTER_INTERFACE)
1236 break;
1237
1238 *(u8 *)req->buf = dev->printer_status;
1239 value = min(wLength, (u16) 1);
1240 break;
1241
1242 case 2: /* Soft Reset */
1243 /* Only one printer interface is supported. */
1244 if (wIndex != PRINTER_INTERFACE)
1245 break;
1246
1247 printer_soft_reset(dev);
1248
1249 value = 0;
1250 break;
1251
1252 default:
1253 goto unknown;
1254 }
1255 break;
1256
1257 default:
1258unknown:
1259 VDBG(dev,
1260 "unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
1261 ctrl->bRequestType, ctrl->bRequest,
1262 wValue, wIndex, wLength);
1263 break;
1264 }
1265
1266 /* respond with data transfer before status phase? */
1267 if (value >= 0) {
1268 req->length = value;
SangSu Park82963452008-09-22 15:41:15 -07001269 req->zero = value < wLength;
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001270 value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
1271 if (value < 0) {
1272 DBG(dev, "ep_queue --> %d\n", value);
1273 req->status = 0;
1274 printer_setup_complete(gadget->ep0, req);
1275 }
1276 }
1277
1278 /* host either stalls (value < 0) or reports success */
1279 return value;
1280}
1281
1282static void
1283printer_disconnect(struct usb_gadget *gadget)
1284{
1285 struct printer_dev *dev = get_gadget_data(gadget);
1286 unsigned long flags;
1287
Harvey Harrison441b62c2008-03-03 16:08:34 -08001288 DBG(dev, "%s\n", __func__);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001289
1290 spin_lock_irqsave(&dev->lock, flags);
1291
1292 printer_reset_interface(dev);
1293
1294 spin_unlock_irqrestore(&dev->lock, flags);
1295}
1296
1297static void
1298printer_unbind(struct usb_gadget *gadget)
1299{
1300 struct printer_dev *dev = get_gadget_data(gadget);
1301 struct usb_request *req;
1302
1303
Harvey Harrison441b62c2008-03-03 16:08:34 -08001304 DBG(dev, "%s\n", __func__);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001305
1306 /* Remove sysfs files */
1307 device_destroy(usb_gadget_class, g_printer_devno);
1308
1309 /* Remove Character Device */
1310 cdev_del(&dev->printer_cdev);
1311
1312 /* we must already have been disconnected ... no i/o may be active */
1313 WARN_ON(!list_empty(&dev->tx_reqs_active));
1314 WARN_ON(!list_empty(&dev->rx_reqs_active));
1315
1316 /* Free all memory for this driver. */
1317 while (!list_empty(&dev->tx_reqs)) {
1318 req = container_of(dev->tx_reqs.next, struct usb_request,
1319 list);
1320 list_del(&req->list);
1321 printer_req_free(dev->in_ep, req);
1322 }
1323
Adrian Bunkefa66f12008-02-09 03:16:03 -08001324 if (dev->current_rx_req != NULL)
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001325 printer_req_free(dev->out_ep, dev->current_rx_req);
1326
1327 while (!list_empty(&dev->rx_reqs)) {
1328 req = container_of(dev->rx_reqs.next,
1329 struct usb_request, list);
1330 list_del(&req->list);
1331 printer_req_free(dev->out_ep, req);
1332 }
1333
1334 while (!list_empty(&dev->rx_buffers)) {
1335 req = container_of(dev->rx_buffers.next,
1336 struct usb_request, list);
1337 list_del(&req->list);
1338 printer_req_free(dev->out_ep, req);
1339 }
1340
1341 if (dev->req) {
1342 printer_req_free(gadget->ep0, dev->req);
1343 dev->req = NULL;
1344 }
1345
1346 set_gadget_data(gadget, NULL);
1347}
1348
Michal Nazarewicze12995e2010-08-12 17:43:52 +02001349static int __init
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001350printer_bind(struct usb_gadget *gadget)
1351{
1352 struct printer_dev *dev;
1353 struct usb_ep *in_ep, *out_ep;
1354 int status = -ENOMEM;
1355 int gcnum;
1356 size_t len;
1357 u32 i;
1358 struct usb_request *req;
1359
1360 dev = &usb_printer_gadget;
1361
1362
1363 /* Setup the sysfs files for the printer gadget. */
Greg Kroah-Hartmanb0b090e2008-07-21 20:03:34 -07001364 dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
1365 NULL, "g_printer");
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001366 if (IS_ERR(dev->pdev)) {
1367 ERROR(dev, "Failed to create device: g_printer\n");
1368 goto fail;
1369 }
1370
1371 /*
1372 * Register a character device as an interface to a user mode
1373 * program that handles the printer specific functionality.
1374 */
1375 cdev_init(&dev->printer_cdev, &printer_io_operations);
1376 dev->printer_cdev.owner = THIS_MODULE;
1377 status = cdev_add(&dev->printer_cdev, g_printer_devno, 1);
1378 if (status) {
1379 ERROR(dev, "Failed to open char device\n");
1380 goto fail;
1381 }
1382
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001383 gcnum = usb_gadget_controller_number(gadget);
1384 if (gcnum >= 0) {
1385 device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
1386 } else {
1387 dev_warn(&gadget->dev, "controller '%s' not recognized\n",
1388 gadget->name);
1389 /* unrecognized, but safe unless bulk is REALLY quirky */
1390 device_desc.bcdDevice =
Harvey Harrison551509d2009-02-11 14:11:36 -08001391 cpu_to_le16(0xFFFF);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001392 }
1393 snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
1394 init_utsname()->sysname, init_utsname()->release,
1395 gadget->name);
1396
1397 device_desc.idVendor =
Harvey Harrison551509d2009-02-11 14:11:36 -08001398 cpu_to_le16(PRINTER_VENDOR_NUM);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001399 device_desc.idProduct =
Harvey Harrison551509d2009-02-11 14:11:36 -08001400 cpu_to_le16(PRINTER_PRODUCT_NUM);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001401
1402 /* support optional vendor/distro customization */
1403 if (idVendor) {
1404 if (!idProduct) {
1405 dev_err(&gadget->dev, "idVendor needs idProduct!\n");
1406 return -ENODEV;
1407 }
1408 device_desc.idVendor = cpu_to_le16(idVendor);
1409 device_desc.idProduct = cpu_to_le16(idProduct);
1410 if (bcdDevice)
1411 device_desc.bcdDevice = cpu_to_le16(bcdDevice);
1412 }
1413
1414 if (iManufacturer)
1415 strlcpy(manufacturer, iManufacturer, sizeof manufacturer);
1416
1417 if (iProduct)
1418 strlcpy(product_desc, iProduct, sizeof product_desc);
1419
1420 if (iSerialNum)
1421 strlcpy(serial_num, iSerialNum, sizeof serial_num);
1422
1423 if (iPNPstring)
1424 strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2);
1425
1426 len = strlen(pnp_string);
1427 pnp_string[0] = (len >> 8) & 0xFF;
1428 pnp_string[1] = len & 0xFF;
1429
1430 /* all we really need is bulk IN/OUT */
1431 usb_ep_autoconfig_reset(gadget);
1432 in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc);
1433 if (!in_ep) {
1434autoconf_fail:
1435 dev_err(&gadget->dev, "can't autoconfigure on %s\n",
1436 gadget->name);
1437 return -ENODEV;
1438 }
1439 in_ep->driver_data = in_ep; /* claim */
1440
1441 out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc);
1442 if (!out_ep)
1443 goto autoconf_fail;
1444 out_ep->driver_data = out_ep; /* claim */
1445
1446#ifdef CONFIG_USB_GADGET_DUALSPEED
Sebastian Andrzej Siewior765f5b82011-06-23 14:26:11 +02001447 /* assumes that all endpoints are dual-speed */
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001448 hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
1449 hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
1450#endif /* DUALSPEED */
1451
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001452 usb_gadget_set_selfpowered(gadget);
1453
1454 if (gadget->is_otg) {
1455 otg_desc.bmAttributes |= USB_OTG_HNP,
1456 config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001457 }
1458
1459 spin_lock_init(&dev->lock);
Jiri Slaby10ca4422010-06-21 17:02:40 +02001460 mutex_init(&dev->lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001461 INIT_LIST_HEAD(&dev->tx_reqs);
1462 INIT_LIST_HEAD(&dev->tx_reqs_active);
1463 INIT_LIST_HEAD(&dev->rx_reqs);
1464 INIT_LIST_HEAD(&dev->rx_reqs_active);
1465 INIT_LIST_HEAD(&dev->rx_buffers);
1466 init_waitqueue_head(&dev->rx_wait);
1467 init_waitqueue_head(&dev->tx_wait);
1468 init_waitqueue_head(&dev->tx_flush_wait);
1469
1470 dev->config = 0;
1471 dev->interface = -1;
1472 dev->printer_cdev_open = 0;
1473 dev->printer_status = PRINTER_NOT_ERROR;
1474 dev->current_rx_req = NULL;
1475 dev->current_rx_bytes = 0;
1476 dev->current_rx_buf = NULL;
1477
1478 dev->in_ep = in_ep;
1479 dev->out_ep = out_ep;
1480
1481 /* preallocate control message data and buffer */
1482 dev->req = printer_req_alloc(gadget->ep0, USB_DESC_BUFSIZE,
1483 GFP_KERNEL);
1484 if (!dev->req) {
1485 status = -ENOMEM;
1486 goto fail;
1487 }
1488
1489 for (i = 0; i < QLEN; i++) {
1490 req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
1491 if (!req) {
1492 while (!list_empty(&dev->tx_reqs)) {
1493 req = container_of(dev->tx_reqs.next,
1494 struct usb_request, list);
1495 list_del(&req->list);
1496 printer_req_free(dev->in_ep, req);
1497 }
1498 return -ENOMEM;
1499 }
1500 list_add(&req->list, &dev->tx_reqs);
1501 }
1502
1503 for (i = 0; i < QLEN; i++) {
1504 req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
1505 if (!req) {
1506 while (!list_empty(&dev->rx_reqs)) {
1507 req = container_of(dev->rx_reqs.next,
1508 struct usb_request, list);
1509 list_del(&req->list);
1510 printer_req_free(dev->out_ep, req);
1511 }
1512 return -ENOMEM;
1513 }
1514 list_add(&req->list, &dev->rx_reqs);
1515 }
1516
1517 dev->req->complete = printer_setup_complete;
1518
1519 /* finish hookup to lower layer ... */
1520 dev->gadget = gadget;
1521 set_gadget_data(gadget, dev);
1522 gadget->ep0->driver_data = dev;
1523
1524 INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
1525 INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name,
1526 in_ep->name);
1527
1528 return 0;
1529
1530fail:
1531 printer_unbind(gadget);
1532 return status;
1533}
1534
1535/*-------------------------------------------------------------------------*/
1536
1537static struct usb_gadget_driver printer_driver = {
Michal Nazarewicz7177aed2011-11-19 18:27:38 +01001538 .max_speed = DEVSPEED,
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001539
1540 .function = (char *) driver_desc,
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001541 .unbind = printer_unbind,
1542
1543 .setup = printer_setup,
1544 .disconnect = printer_disconnect,
1545
1546 .driver = {
1547 .name = (char *) shortname,
1548 .owner = THIS_MODULE,
1549 },
1550};
1551
1552MODULE_DESCRIPTION(DRIVER_DESC);
1553MODULE_AUTHOR("Craig Nadler");
1554MODULE_LICENSE("GPL");
1555
1556static int __init
1557init(void)
1558{
1559 int status;
1560
1561 usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
1562 if (IS_ERR(usb_gadget_class)) {
1563 status = PTR_ERR(usb_gadget_class);
1564 ERROR(dev, "unable to create usb_gadget class %d\n", status);
1565 return status;
1566 }
1567
1568 status = alloc_chrdev_region(&g_printer_devno, 0, 1,
1569 "USB printer gadget");
1570 if (status) {
1571 ERROR(dev, "alloc_chrdev_region %d\n", status);
1572 class_destroy(usb_gadget_class);
1573 return status;
1574 }
1575
Uwe Kleine-Königb0fca502010-08-12 17:43:53 +02001576 status = usb_gadget_probe_driver(&printer_driver, printer_bind);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001577 if (status) {
1578 class_destroy(usb_gadget_class);
1579 unregister_chrdev_region(g_printer_devno, 1);
Uwe Kleine-Königb0fca502010-08-12 17:43:53 +02001580 DBG(dev, "usb_gadget_probe_driver %x\n", status);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001581 }
1582
1583 return status;
1584}
1585module_init(init);
1586
1587static void __exit
1588cleanup(void)
1589{
1590 int status;
1591
Jiri Slaby10ca4422010-06-21 17:02:40 +02001592 mutex_lock(&usb_printer_gadget.lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001593 status = usb_gadget_unregister_driver(&printer_driver);
1594 if (status)
1595 ERROR(dev, "usb_gadget_unregister_driver %x\n", status);
1596
Fabian Godehardt8582d862011-09-01 14:15:46 +02001597 unregister_chrdev_region(g_printer_devno, 1);
Alan Sternd5aa4752011-01-10 11:23:05 -05001598 class_destroy(usb_gadget_class);
Jiri Slaby10ca4422010-06-21 17:02:40 +02001599 mutex_unlock(&usb_printer_gadget.lock_printer_io);
Craig W. Nadler25a010c2007-11-11 15:00:15 -08001600}
1601module_exit(cleanup);