Tomasz Figa | 11ad39e | 2013-04-06 02:40:36 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2007 Ben Dooks |
| 3 | * Copyright (c) 2008 Simtec Electronics |
| 4 | * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> |
| 5 | * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> |
| 6 | * |
| 7 | * PWM driver for Samsung SoCs |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License as published by |
| 11 | * the Free Software Foundation; either version 2 of the License. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/bitops.h> |
| 15 | #include <linux/clk.h> |
| 16 | #include <linux/export.h> |
| 17 | #include <linux/err.h> |
| 18 | #include <linux/io.h> |
| 19 | #include <linux/kernel.h> |
| 20 | #include <linux/module.h> |
Sachin Kamat | c3bdfe1 | 2013-09-27 16:53:24 +0530 | [diff] [blame] | 21 | #include <linux/of.h> |
Tomasz Figa | 11ad39e | 2013-04-06 02:40:36 +0200 | [diff] [blame] | 22 | #include <linux/platform_device.h> |
| 23 | #include <linux/pwm.h> |
| 24 | #include <linux/slab.h> |
| 25 | #include <linux/spinlock.h> |
| 26 | #include <linux/time.h> |
| 27 | |
| 28 | /* For struct samsung_timer_variant and samsung_pwm_lock. */ |
| 29 | #include <clocksource/samsung_pwm.h> |
| 30 | |
| 31 | #define REG_TCFG0 0x00 |
| 32 | #define REG_TCFG1 0x04 |
| 33 | #define REG_TCON 0x08 |
| 34 | |
| 35 | #define REG_TCNTB(chan) (0x0c + ((chan) * 0xc)) |
| 36 | #define REG_TCMPB(chan) (0x10 + ((chan) * 0xc)) |
| 37 | |
| 38 | #define TCFG0_PRESCALER_MASK 0xff |
| 39 | #define TCFG0_PRESCALER1_SHIFT 8 |
| 40 | |
| 41 | #define TCFG1_MUX_MASK 0xf |
| 42 | #define TCFG1_SHIFT(chan) (4 * (chan)) |
| 43 | |
| 44 | /* |
| 45 | * Each channel occupies 4 bits in TCON register, but there is a gap of 4 |
| 46 | * bits (one channel) after channel 0, so channels have different numbering |
| 47 | * when accessing TCON register. See to_tcon_channel() function. |
| 48 | * |
| 49 | * In addition, the location of autoreload bit for channel 4 (TCON channel 5) |
| 50 | * in its set of bits is 2 as opposed to 3 for other channels. |
| 51 | */ |
| 52 | #define TCON_START(chan) BIT(4 * (chan) + 0) |
| 53 | #define TCON_MANUALUPDATE(chan) BIT(4 * (chan) + 1) |
| 54 | #define TCON_INVERT(chan) BIT(4 * (chan) + 2) |
| 55 | #define _TCON_AUTORELOAD(chan) BIT(4 * (chan) + 3) |
| 56 | #define _TCON_AUTORELOAD4(chan) BIT(4 * (chan) + 2) |
| 57 | #define TCON_AUTORELOAD(chan) \ |
| 58 | ((chan < 5) ? _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan)) |
| 59 | |
| 60 | /** |
| 61 | * struct samsung_pwm_channel - private data of PWM channel |
| 62 | * @period_ns: current period in nanoseconds programmed to the hardware |
| 63 | * @duty_ns: current duty time in nanoseconds programmed to the hardware |
| 64 | * @tin_ns: time of one timer tick in nanoseconds with current timer rate |
| 65 | */ |
| 66 | struct samsung_pwm_channel { |
| 67 | u32 period_ns; |
| 68 | u32 duty_ns; |
| 69 | u32 tin_ns; |
| 70 | }; |
| 71 | |
| 72 | /** |
| 73 | * struct samsung_pwm_chip - private data of PWM chip |
| 74 | * @chip: generic PWM chip |
| 75 | * @variant: local copy of hardware variant data |
| 76 | * @inverter_mask: inverter status for all channels - one bit per channel |
| 77 | * @base: base address of mapped PWM registers |
| 78 | * @base_clk: base clock used to drive the timers |
| 79 | * @tclk0: external clock 0 (can be ERR_PTR if not present) |
| 80 | * @tclk1: external clock 1 (can be ERR_PTR if not present) |
| 81 | */ |
| 82 | struct samsung_pwm_chip { |
| 83 | struct pwm_chip chip; |
| 84 | struct samsung_pwm_variant variant; |
| 85 | u8 inverter_mask; |
| 86 | |
| 87 | void __iomem *base; |
| 88 | struct clk *base_clk; |
| 89 | struct clk *tclk0; |
| 90 | struct clk *tclk1; |
| 91 | }; |
| 92 | |
| 93 | #ifndef CONFIG_CLKSRC_SAMSUNG_PWM |
| 94 | /* |
| 95 | * PWM block is shared between pwm-samsung and samsung_pwm_timer drivers |
| 96 | * and some registers need access synchronization. If both drivers are |
| 97 | * compiled in, the spinlock is defined in the clocksource driver, |
| 98 | * otherwise following definition is used. |
| 99 | * |
| 100 | * Currently we do not need any more complex synchronization method |
| 101 | * because all the supported SoCs contain only one instance of the PWM |
| 102 | * IP. Should this change, both drivers will need to be modified to |
| 103 | * properly synchronize accesses to particular instances. |
| 104 | */ |
| 105 | static DEFINE_SPINLOCK(samsung_pwm_lock); |
| 106 | #endif |
| 107 | |
| 108 | static inline |
| 109 | struct samsung_pwm_chip *to_samsung_pwm_chip(struct pwm_chip *chip) |
| 110 | { |
| 111 | return container_of(chip, struct samsung_pwm_chip, chip); |
| 112 | } |
| 113 | |
| 114 | static inline unsigned int to_tcon_channel(unsigned int channel) |
| 115 | { |
| 116 | /* TCON register has a gap of 4 bits (1 channel) after channel 0 */ |
| 117 | return (channel == 0) ? 0 : (channel + 1); |
| 118 | } |
| 119 | |
| 120 | static void pwm_samsung_set_divisor(struct samsung_pwm_chip *pwm, |
| 121 | unsigned int channel, u8 divisor) |
| 122 | { |
| 123 | u8 shift = TCFG1_SHIFT(channel); |
| 124 | unsigned long flags; |
| 125 | u32 reg; |
| 126 | u8 bits; |
| 127 | |
| 128 | bits = (fls(divisor) - 1) - pwm->variant.div_base; |
| 129 | |
| 130 | spin_lock_irqsave(&samsung_pwm_lock, flags); |
| 131 | |
| 132 | reg = readl(pwm->base + REG_TCFG1); |
| 133 | reg &= ~(TCFG1_MUX_MASK << shift); |
| 134 | reg |= bits << shift; |
| 135 | writel(reg, pwm->base + REG_TCFG1); |
| 136 | |
| 137 | spin_unlock_irqrestore(&samsung_pwm_lock, flags); |
| 138 | } |
| 139 | |
| 140 | static int pwm_samsung_is_tdiv(struct samsung_pwm_chip *chip, unsigned int chan) |
| 141 | { |
| 142 | struct samsung_pwm_variant *variant = &chip->variant; |
| 143 | u32 reg; |
| 144 | |
| 145 | reg = readl(chip->base + REG_TCFG1); |
| 146 | reg >>= TCFG1_SHIFT(chan); |
| 147 | reg &= TCFG1_MUX_MASK; |
| 148 | |
| 149 | return (BIT(reg) & variant->tclk_mask) == 0; |
| 150 | } |
| 151 | |
| 152 | static unsigned long pwm_samsung_get_tin_rate(struct samsung_pwm_chip *chip, |
| 153 | unsigned int chan) |
| 154 | { |
| 155 | unsigned long rate; |
| 156 | u32 reg; |
| 157 | |
| 158 | rate = clk_get_rate(chip->base_clk); |
| 159 | |
| 160 | reg = readl(chip->base + REG_TCFG0); |
| 161 | if (chan >= 2) |
| 162 | reg >>= TCFG0_PRESCALER1_SHIFT; |
| 163 | reg &= TCFG0_PRESCALER_MASK; |
| 164 | |
| 165 | return rate / (reg + 1); |
| 166 | } |
| 167 | |
| 168 | static unsigned long pwm_samsung_calc_tin(struct samsung_pwm_chip *chip, |
| 169 | unsigned int chan, unsigned long freq) |
| 170 | { |
| 171 | struct samsung_pwm_variant *variant = &chip->variant; |
| 172 | unsigned long rate; |
| 173 | struct clk *clk; |
| 174 | u8 div; |
| 175 | |
| 176 | if (!pwm_samsung_is_tdiv(chip, chan)) { |
| 177 | clk = (chan < 2) ? chip->tclk0 : chip->tclk1; |
| 178 | if (!IS_ERR(clk)) { |
| 179 | rate = clk_get_rate(clk); |
| 180 | if (rate) |
| 181 | return rate; |
| 182 | } |
| 183 | |
| 184 | dev_warn(chip->chip.dev, |
| 185 | "tclk of PWM %d is inoperational, using tdiv\n", chan); |
| 186 | } |
| 187 | |
| 188 | rate = pwm_samsung_get_tin_rate(chip, chan); |
| 189 | dev_dbg(chip->chip.dev, "tin parent at %lu\n", rate); |
| 190 | |
| 191 | /* |
| 192 | * Compare minimum PWM frequency that can be achieved with possible |
| 193 | * divider settings and choose the lowest divisor that can generate |
| 194 | * frequencies lower than requested. |
| 195 | */ |
| 196 | for (div = variant->div_base; div < 4; ++div) |
| 197 | if ((rate >> (variant->bits + div)) < freq) |
| 198 | break; |
| 199 | |
| 200 | pwm_samsung_set_divisor(chip, chan, BIT(div)); |
| 201 | |
| 202 | return rate >> div; |
| 203 | } |
| 204 | |
| 205 | static int pwm_samsung_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| 206 | { |
| 207 | struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); |
| 208 | struct samsung_pwm_channel *our_chan; |
| 209 | |
| 210 | if (!(our_chip->variant.output_mask & BIT(pwm->hwpwm))) { |
| 211 | dev_warn(chip->dev, |
| 212 | "tried to request PWM channel %d without output\n", |
| 213 | pwm->hwpwm); |
| 214 | return -EINVAL; |
| 215 | } |
| 216 | |
| 217 | our_chan = devm_kzalloc(chip->dev, sizeof(*our_chan), GFP_KERNEL); |
| 218 | if (!our_chan) |
| 219 | return -ENOMEM; |
| 220 | |
| 221 | pwm_set_chip_data(pwm, our_chan); |
| 222 | |
| 223 | return 0; |
| 224 | } |
| 225 | |
| 226 | static void pwm_samsung_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| 227 | { |
Tomasz Figa | 11ad39e | 2013-04-06 02:40:36 +0200 | [diff] [blame] | 228 | devm_kfree(chip->dev, pwm_get_chip_data(pwm)); |
Sachin Kamat | b577cdc | 2013-10-29 10:27:43 +0530 | [diff] [blame] | 229 | pwm_set_chip_data(pwm, NULL); |
Tomasz Figa | 11ad39e | 2013-04-06 02:40:36 +0200 | [diff] [blame] | 230 | } |
| 231 | |
| 232 | static int pwm_samsung_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 233 | { |
| 234 | struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); |
| 235 | unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); |
| 236 | unsigned long flags; |
| 237 | u32 tcon; |
| 238 | |
| 239 | spin_lock_irqsave(&samsung_pwm_lock, flags); |
| 240 | |
| 241 | tcon = readl(our_chip->base + REG_TCON); |
| 242 | |
| 243 | tcon &= ~TCON_START(tcon_chan); |
| 244 | tcon |= TCON_MANUALUPDATE(tcon_chan); |
| 245 | writel(tcon, our_chip->base + REG_TCON); |
| 246 | |
| 247 | tcon &= ~TCON_MANUALUPDATE(tcon_chan); |
| 248 | tcon |= TCON_START(tcon_chan) | TCON_AUTORELOAD(tcon_chan); |
| 249 | writel(tcon, our_chip->base + REG_TCON); |
| 250 | |
| 251 | spin_unlock_irqrestore(&samsung_pwm_lock, flags); |
| 252 | |
| 253 | return 0; |
| 254 | } |
| 255 | |
| 256 | static void pwm_samsung_disable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 257 | { |
| 258 | struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); |
| 259 | unsigned int tcon_chan = to_tcon_channel(pwm->hwpwm); |
| 260 | unsigned long flags; |
| 261 | u32 tcon; |
| 262 | |
| 263 | spin_lock_irqsave(&samsung_pwm_lock, flags); |
| 264 | |
| 265 | tcon = readl(our_chip->base + REG_TCON); |
| 266 | tcon &= ~TCON_AUTORELOAD(tcon_chan); |
| 267 | writel(tcon, our_chip->base + REG_TCON); |
| 268 | |
| 269 | spin_unlock_irqrestore(&samsung_pwm_lock, flags); |
| 270 | } |
| 271 | |
| 272 | static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| 273 | int duty_ns, int period_ns) |
| 274 | { |
| 275 | struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); |
| 276 | struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm); |
| 277 | u32 tin_ns = chan->tin_ns, tcnt, tcmp; |
| 278 | |
| 279 | /* |
| 280 | * We currently avoid using 64bit arithmetic by using the |
| 281 | * fact that anything faster than 1Hz is easily representable |
| 282 | * by 32bits. |
| 283 | */ |
| 284 | if (period_ns > NSEC_PER_SEC) |
| 285 | return -ERANGE; |
| 286 | |
| 287 | if (period_ns == chan->period_ns && duty_ns == chan->duty_ns) |
| 288 | return 0; |
| 289 | |
| 290 | tcnt = readl(our_chip->base + REG_TCNTB(pwm->hwpwm)); |
| 291 | |
| 292 | /* We need tick count for calculation, not last tick. */ |
| 293 | ++tcnt; |
| 294 | |
| 295 | /* Check to see if we are changing the clock rate of the PWM. */ |
| 296 | if (chan->period_ns != period_ns) { |
| 297 | unsigned long tin_rate; |
| 298 | u32 period; |
| 299 | |
| 300 | period = NSEC_PER_SEC / period_ns; |
| 301 | |
| 302 | dev_dbg(our_chip->chip.dev, "duty_ns=%d, period_ns=%d (%u)\n", |
| 303 | duty_ns, period_ns, period); |
| 304 | |
| 305 | tin_rate = pwm_samsung_calc_tin(our_chip, pwm->hwpwm, period); |
| 306 | |
| 307 | dev_dbg(our_chip->chip.dev, "tin_rate=%lu\n", tin_rate); |
| 308 | |
| 309 | tin_ns = NSEC_PER_SEC / tin_rate; |
| 310 | tcnt = period_ns / tin_ns; |
| 311 | } |
| 312 | |
| 313 | /* Period is too short. */ |
| 314 | if (tcnt <= 1) |
| 315 | return -ERANGE; |
| 316 | |
| 317 | /* Note that counters count down. */ |
| 318 | tcmp = duty_ns / tin_ns; |
| 319 | |
| 320 | /* 0% duty is not available */ |
| 321 | if (!tcmp) |
| 322 | ++tcmp; |
| 323 | |
| 324 | tcmp = tcnt - tcmp; |
| 325 | |
| 326 | /* Decrement to get tick numbers, instead of tick counts. */ |
| 327 | --tcnt; |
| 328 | /* -1UL will give 100% duty. */ |
| 329 | --tcmp; |
| 330 | |
| 331 | dev_dbg(our_chip->chip.dev, |
| 332 | "tin_ns=%u, tcmp=%u/%u\n", tin_ns, tcmp, tcnt); |
| 333 | |
| 334 | /* Update PWM registers. */ |
| 335 | writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm)); |
| 336 | writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm)); |
| 337 | |
| 338 | if (test_bit(PWMF_ENABLED, &pwm->flags)) |
| 339 | pwm_samsung_enable(chip, pwm); |
| 340 | |
| 341 | chan->period_ns = period_ns; |
| 342 | chan->tin_ns = tin_ns; |
| 343 | chan->duty_ns = duty_ns; |
| 344 | |
| 345 | return 0; |
| 346 | } |
| 347 | |
| 348 | static void pwm_samsung_set_invert(struct samsung_pwm_chip *chip, |
| 349 | unsigned int channel, bool invert) |
| 350 | { |
| 351 | unsigned int tcon_chan = to_tcon_channel(channel); |
| 352 | unsigned long flags; |
| 353 | u32 tcon; |
| 354 | |
| 355 | spin_lock_irqsave(&samsung_pwm_lock, flags); |
| 356 | |
| 357 | tcon = readl(chip->base + REG_TCON); |
| 358 | |
| 359 | if (invert) { |
| 360 | chip->inverter_mask |= BIT(channel); |
| 361 | tcon |= TCON_INVERT(tcon_chan); |
| 362 | } else { |
| 363 | chip->inverter_mask &= ~BIT(channel); |
| 364 | tcon &= ~TCON_INVERT(tcon_chan); |
| 365 | } |
| 366 | |
| 367 | writel(tcon, chip->base + REG_TCON); |
| 368 | |
| 369 | spin_unlock_irqrestore(&samsung_pwm_lock, flags); |
| 370 | } |
| 371 | |
| 372 | static int pwm_samsung_set_polarity(struct pwm_chip *chip, |
| 373 | struct pwm_device *pwm, |
| 374 | enum pwm_polarity polarity) |
| 375 | { |
| 376 | struct samsung_pwm_chip *our_chip = to_samsung_pwm_chip(chip); |
| 377 | bool invert = (polarity == PWM_POLARITY_NORMAL); |
| 378 | |
| 379 | /* Inverted means normal in the hardware. */ |
| 380 | pwm_samsung_set_invert(our_chip, pwm->hwpwm, invert); |
| 381 | |
| 382 | return 0; |
| 383 | } |
| 384 | |
| 385 | static const struct pwm_ops pwm_samsung_ops = { |
| 386 | .request = pwm_samsung_request, |
| 387 | .free = pwm_samsung_free, |
| 388 | .enable = pwm_samsung_enable, |
| 389 | .disable = pwm_samsung_disable, |
| 390 | .config = pwm_samsung_config, |
| 391 | .set_polarity = pwm_samsung_set_polarity, |
| 392 | .owner = THIS_MODULE, |
| 393 | }; |
| 394 | |
| 395 | #ifdef CONFIG_OF |
| 396 | static const struct samsung_pwm_variant s3c24xx_variant = { |
| 397 | .bits = 16, |
| 398 | .div_base = 1, |
| 399 | .has_tint_cstat = false, |
| 400 | .tclk_mask = BIT(4), |
| 401 | }; |
| 402 | |
| 403 | static const struct samsung_pwm_variant s3c64xx_variant = { |
| 404 | .bits = 32, |
| 405 | .div_base = 0, |
| 406 | .has_tint_cstat = true, |
| 407 | .tclk_mask = BIT(7) | BIT(6) | BIT(5), |
| 408 | }; |
| 409 | |
| 410 | static const struct samsung_pwm_variant s5p64x0_variant = { |
| 411 | .bits = 32, |
| 412 | .div_base = 0, |
| 413 | .has_tint_cstat = true, |
| 414 | .tclk_mask = 0, |
| 415 | }; |
| 416 | |
| 417 | static const struct samsung_pwm_variant s5pc100_variant = { |
| 418 | .bits = 32, |
| 419 | .div_base = 0, |
| 420 | .has_tint_cstat = true, |
| 421 | .tclk_mask = BIT(5), |
| 422 | }; |
| 423 | |
| 424 | static const struct of_device_id samsung_pwm_matches[] = { |
| 425 | { .compatible = "samsung,s3c2410-pwm", .data = &s3c24xx_variant }, |
| 426 | { .compatible = "samsung,s3c6400-pwm", .data = &s3c64xx_variant }, |
| 427 | { .compatible = "samsung,s5p6440-pwm", .data = &s5p64x0_variant }, |
| 428 | { .compatible = "samsung,s5pc100-pwm", .data = &s5pc100_variant }, |
| 429 | { .compatible = "samsung,exynos4210-pwm", .data = &s5p64x0_variant }, |
| 430 | {}, |
| 431 | }; |
| 432 | |
| 433 | static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip) |
| 434 | { |
| 435 | struct device_node *np = chip->chip.dev->of_node; |
| 436 | const struct of_device_id *match; |
| 437 | struct property *prop; |
| 438 | const __be32 *cur; |
| 439 | u32 val; |
| 440 | |
| 441 | match = of_match_node(samsung_pwm_matches, np); |
| 442 | if (!match) |
| 443 | return -ENODEV; |
| 444 | |
| 445 | memcpy(&chip->variant, match->data, sizeof(chip->variant)); |
| 446 | |
| 447 | of_property_for_each_u32(np, "samsung,pwm-outputs", prop, cur, val) { |
| 448 | if (val >= SAMSUNG_PWM_NUM) { |
| 449 | dev_err(chip->chip.dev, |
| 450 | "%s: invalid channel index in samsung,pwm-outputs property\n", |
| 451 | __func__); |
| 452 | continue; |
| 453 | } |
| 454 | chip->variant.output_mask |= BIT(val); |
| 455 | } |
| 456 | |
| 457 | return 0; |
| 458 | } |
| 459 | #else |
| 460 | static int pwm_samsung_parse_dt(struct samsung_pwm_chip *chip) |
| 461 | { |
| 462 | return -ENODEV; |
| 463 | } |
| 464 | #endif |
| 465 | |
| 466 | static int pwm_samsung_probe(struct platform_device *pdev) |
| 467 | { |
| 468 | struct device *dev = &pdev->dev; |
| 469 | struct samsung_pwm_chip *chip; |
| 470 | struct resource *res; |
| 471 | unsigned int chan; |
| 472 | int ret; |
| 473 | |
| 474 | chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); |
| 475 | if (chip == NULL) |
| 476 | return -ENOMEM; |
| 477 | |
| 478 | chip->chip.dev = &pdev->dev; |
| 479 | chip->chip.ops = &pwm_samsung_ops; |
| 480 | chip->chip.base = -1; |
| 481 | chip->chip.npwm = SAMSUNG_PWM_NUM; |
| 482 | chip->inverter_mask = BIT(SAMSUNG_PWM_NUM) - 1; |
| 483 | |
| 484 | if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) { |
| 485 | ret = pwm_samsung_parse_dt(chip); |
| 486 | if (ret) |
| 487 | return ret; |
| 488 | |
| 489 | chip->chip.of_xlate = of_pwm_xlate_with_flags; |
| 490 | chip->chip.of_pwm_n_cells = 3; |
| 491 | } else { |
| 492 | if (!pdev->dev.platform_data) { |
| 493 | dev_err(&pdev->dev, "no platform data specified\n"); |
| 494 | return -EINVAL; |
| 495 | } |
| 496 | |
| 497 | memcpy(&chip->variant, pdev->dev.platform_data, |
| 498 | sizeof(chip->variant)); |
| 499 | } |
| 500 | |
| 501 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 502 | chip->base = devm_ioremap_resource(&pdev->dev, res); |
| 503 | if (IS_ERR(chip->base)) |
| 504 | return PTR_ERR(chip->base); |
| 505 | |
| 506 | chip->base_clk = devm_clk_get(&pdev->dev, "timers"); |
| 507 | if (IS_ERR(chip->base_clk)) { |
| 508 | dev_err(dev, "failed to get timer base clk\n"); |
| 509 | return PTR_ERR(chip->base_clk); |
| 510 | } |
| 511 | |
| 512 | ret = clk_prepare_enable(chip->base_clk); |
| 513 | if (ret < 0) { |
| 514 | dev_err(dev, "failed to enable base clock\n"); |
| 515 | return ret; |
| 516 | } |
| 517 | |
| 518 | for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan) |
| 519 | if (chip->variant.output_mask & BIT(chan)) |
| 520 | pwm_samsung_set_invert(chip, chan, true); |
| 521 | |
| 522 | /* Following clocks are optional. */ |
| 523 | chip->tclk0 = devm_clk_get(&pdev->dev, "pwm-tclk0"); |
| 524 | chip->tclk1 = devm_clk_get(&pdev->dev, "pwm-tclk1"); |
| 525 | |
| 526 | platform_set_drvdata(pdev, chip); |
| 527 | |
| 528 | ret = pwmchip_add(&chip->chip); |
| 529 | if (ret < 0) { |
| 530 | dev_err(dev, "failed to register PWM chip\n"); |
| 531 | clk_disable_unprepare(chip->base_clk); |
| 532 | return ret; |
| 533 | } |
| 534 | |
| 535 | dev_dbg(dev, "base_clk at %lu, tclk0 at %lu, tclk1 at %lu\n", |
| 536 | clk_get_rate(chip->base_clk), |
| 537 | !IS_ERR(chip->tclk0) ? clk_get_rate(chip->tclk0) : 0, |
| 538 | !IS_ERR(chip->tclk1) ? clk_get_rate(chip->tclk1) : 0); |
| 539 | |
| 540 | return 0; |
| 541 | } |
| 542 | |
| 543 | static int pwm_samsung_remove(struct platform_device *pdev) |
| 544 | { |
| 545 | struct samsung_pwm_chip *chip = platform_get_drvdata(pdev); |
| 546 | int ret; |
| 547 | |
| 548 | ret = pwmchip_remove(&chip->chip); |
| 549 | if (ret < 0) |
| 550 | return ret; |
| 551 | |
| 552 | clk_disable_unprepare(chip->base_clk); |
| 553 | |
| 554 | return 0; |
| 555 | } |
| 556 | |
| 557 | #ifdef CONFIG_PM_SLEEP |
| 558 | static int pwm_samsung_suspend(struct device *dev) |
| 559 | { |
| 560 | struct samsung_pwm_chip *chip = dev_get_drvdata(dev); |
| 561 | unsigned int i; |
| 562 | |
| 563 | /* |
| 564 | * No one preserves these values during suspend so reset them. |
| 565 | * Otherwise driver leaves PWM unconfigured if same values are |
| 566 | * passed to pwm_config() next time. |
| 567 | */ |
| 568 | for (i = 0; i < SAMSUNG_PWM_NUM; ++i) { |
| 569 | struct pwm_device *pwm = &chip->chip.pwms[i]; |
| 570 | struct samsung_pwm_channel *chan = pwm_get_chip_data(pwm); |
| 571 | |
| 572 | if (!chan) |
| 573 | continue; |
| 574 | |
| 575 | chan->period_ns = 0; |
| 576 | chan->duty_ns = 0; |
| 577 | } |
| 578 | |
| 579 | return 0; |
| 580 | } |
| 581 | |
| 582 | static int pwm_samsung_resume(struct device *dev) |
| 583 | { |
| 584 | struct samsung_pwm_chip *chip = dev_get_drvdata(dev); |
| 585 | unsigned int chan; |
| 586 | |
| 587 | /* |
| 588 | * Inverter setting must be preserved across suspend/resume |
| 589 | * as nobody really seems to configure it more than once. |
| 590 | */ |
| 591 | for (chan = 0; chan < SAMSUNG_PWM_NUM; ++chan) { |
| 592 | if (chip->variant.output_mask & BIT(chan)) |
| 593 | pwm_samsung_set_invert(chip, chan, |
| 594 | chip->inverter_mask & BIT(chan)); |
| 595 | } |
| 596 | |
| 597 | return 0; |
| 598 | } |
| 599 | #endif |
| 600 | |
| 601 | static const struct dev_pm_ops pwm_samsung_pm_ops = { |
| 602 | SET_SYSTEM_SLEEP_PM_OPS(pwm_samsung_suspend, pwm_samsung_resume) |
| 603 | }; |
| 604 | |
| 605 | static struct platform_driver pwm_samsung_driver = { |
| 606 | .driver = { |
| 607 | .name = "samsung-pwm", |
| 608 | .owner = THIS_MODULE, |
| 609 | .pm = &pwm_samsung_pm_ops, |
| 610 | .of_match_table = of_match_ptr(samsung_pwm_matches), |
| 611 | }, |
| 612 | .probe = pwm_samsung_probe, |
| 613 | .remove = pwm_samsung_remove, |
| 614 | }; |
| 615 | module_platform_driver(pwm_samsung_driver); |
| 616 | |
| 617 | MODULE_LICENSE("GPL"); |
| 618 | MODULE_AUTHOR("Tomasz Figa <tomasz.figa@gmail.com>"); |
| 619 | MODULE_ALIAS("platform:samsung-pwm"); |