Dale Farnsworth | aa5bd7e | 2007-05-08 00:26:39 -0700 | [diff] [blame^] | 1 | /* |
| 2 | * rtc class driver for the Maxim MAX6900 chip |
| 3 | * |
| 4 | * Author: Dale Farnsworth <dale@farnsworth.org> |
| 5 | * |
| 6 | * based on previously existing rtc class drivers |
| 7 | * |
| 8 | * 2007 (c) MontaVista, Software, Inc. This file is licensed under |
| 9 | * the terms of the GNU General Public License version 2. This program |
| 10 | * is licensed "as is" without any warranty of any kind, whether express |
| 11 | * or implied. |
| 12 | */ |
| 13 | |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/i2c.h> |
| 16 | #include <linux/bcd.h> |
| 17 | #include <linux/rtc.h> |
| 18 | #include <linux/delay.h> |
| 19 | |
| 20 | #define DRV_NAME "max6900" |
| 21 | #define DRV_VERSION "0.1" |
| 22 | |
| 23 | /* |
| 24 | * register indices |
| 25 | */ |
| 26 | #define MAX6900_REG_SC 0 /* seconds 00-59 */ |
| 27 | #define MAX6900_REG_MN 1 /* minutes 00-59 */ |
| 28 | #define MAX6900_REG_HR 2 /* hours 00-23 */ |
| 29 | #define MAX6900_REG_DT 3 /* day of month 00-31 */ |
| 30 | #define MAX6900_REG_MO 4 /* month 01-12 */ |
| 31 | #define MAX6900_REG_DW 5 /* day of week 1-7 */ |
| 32 | #define MAX6900_REG_YR 6 /* year 00-99 */ |
| 33 | #define MAX6900_REG_CT 7 /* control */ |
| 34 | #define MAX6900_REG_LEN 8 |
| 35 | |
| 36 | #define MAX6900_REG_CT_WP (1 << 7) /* Write Protect */ |
| 37 | |
| 38 | /* |
| 39 | * register read/write commands |
| 40 | */ |
| 41 | #define MAX6900_REG_CONTROL_WRITE 0x8e |
| 42 | #define MAX6900_REG_BURST_READ 0xbf |
| 43 | #define MAX6900_REG_BURST_WRITE 0xbe |
| 44 | #define MAX6900_REG_RESERVED_READ 0x96 |
| 45 | |
| 46 | #define MAX6900_IDLE_TIME_AFTER_WRITE 3 /* specification says 2.5 mS */ |
| 47 | |
| 48 | #define MAX6900_I2C_ADDR 0xa0 |
| 49 | |
| 50 | static unsigned short normal_i2c[] = { |
| 51 | MAX6900_I2C_ADDR >> 1, |
| 52 | I2C_CLIENT_END |
| 53 | }; |
| 54 | |
| 55 | I2C_CLIENT_INSMOD; /* defines addr_data */ |
| 56 | |
| 57 | static int max6900_probe(struct i2c_adapter *adapter, int addr, int kind); |
| 58 | |
| 59 | static int max6900_i2c_read_regs(struct i2c_client *client, u8 *buf) |
| 60 | { |
| 61 | u8 reg_addr[1] = { MAX6900_REG_BURST_READ }; |
| 62 | struct i2c_msg msgs[2] = { |
| 63 | { |
| 64 | .addr = client->addr, |
| 65 | .flags = 0, /* write */ |
| 66 | .len = sizeof(reg_addr), |
| 67 | .buf = reg_addr |
| 68 | }, |
| 69 | { |
| 70 | .addr = client->addr, |
| 71 | .flags = I2C_M_RD, |
| 72 | .len = MAX6900_REG_LEN, |
| 73 | .buf = buf |
| 74 | } |
| 75 | }; |
| 76 | int rc; |
| 77 | |
| 78 | rc = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| 79 | if (rc != ARRAY_SIZE(msgs)) { |
| 80 | dev_err(&client->dev, "%s: register read failed\n", |
| 81 | __FUNCTION__); |
| 82 | return -EIO; |
| 83 | } |
| 84 | return 0; |
| 85 | } |
| 86 | |
| 87 | static int max6900_i2c_write_regs(struct i2c_client *client, u8 const *buf) |
| 88 | { |
| 89 | u8 i2c_buf[MAX6900_REG_LEN + 1] = { MAX6900_REG_BURST_WRITE }; |
| 90 | struct i2c_msg msgs[1] = { |
| 91 | { |
| 92 | .addr = client->addr, |
| 93 | .flags = 0, /* write */ |
| 94 | .len = MAX6900_REG_LEN + 1, |
| 95 | .buf = i2c_buf |
| 96 | } |
| 97 | }; |
| 98 | int rc; |
| 99 | |
| 100 | memcpy(&i2c_buf[1], buf, MAX6900_REG_LEN); |
| 101 | |
| 102 | rc = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| 103 | if (rc != ARRAY_SIZE(msgs)) { |
| 104 | dev_err(&client->dev, "%s: register write failed\n", |
| 105 | __FUNCTION__); |
| 106 | return -EIO; |
| 107 | } |
| 108 | msleep(MAX6900_IDLE_TIME_AFTER_WRITE); |
| 109 | return 0; |
| 110 | } |
| 111 | |
| 112 | static int max6900_i2c_validate_client(struct i2c_client *client) |
| 113 | { |
| 114 | u8 regs[MAX6900_REG_LEN]; |
| 115 | u8 zero_mask[MAX6900_REG_LEN] = { |
| 116 | 0x80, /* seconds */ |
| 117 | 0x80, /* minutes */ |
| 118 | 0x40, /* hours */ |
| 119 | 0xc0, /* day of month */ |
| 120 | 0xe0, /* month */ |
| 121 | 0xf8, /* day of week */ |
| 122 | 0x00, /* year */ |
| 123 | 0x7f, /* control */ |
| 124 | }; |
| 125 | int i; |
| 126 | int rc; |
| 127 | int reserved; |
| 128 | |
| 129 | reserved = i2c_smbus_read_byte_data(client, MAX6900_REG_RESERVED_READ); |
| 130 | if (reserved != 0x07) |
| 131 | return -ENODEV; |
| 132 | |
| 133 | rc = max6900_i2c_read_regs(client, regs); |
| 134 | if (rc < 0) |
| 135 | return rc; |
| 136 | |
| 137 | for (i = 0; i < MAX6900_REG_LEN; ++i) { |
| 138 | if (regs[i] & zero_mask[i]) |
| 139 | return -ENODEV; |
| 140 | } |
| 141 | |
| 142 | return 0; |
| 143 | } |
| 144 | |
| 145 | static int max6900_i2c_read_time(struct i2c_client *client, struct rtc_time *tm) |
| 146 | { |
| 147 | int rc; |
| 148 | u8 regs[MAX6900_REG_LEN]; |
| 149 | |
| 150 | rc = max6900_i2c_read_regs(client, regs); |
| 151 | if (rc < 0) |
| 152 | return rc; |
| 153 | |
| 154 | tm->tm_sec = BCD2BIN(regs[MAX6900_REG_SC]); |
| 155 | tm->tm_min = BCD2BIN(regs[MAX6900_REG_MN]); |
| 156 | tm->tm_hour = BCD2BIN(regs[MAX6900_REG_HR] & 0x3f); |
| 157 | tm->tm_mday = BCD2BIN(regs[MAX6900_REG_DT]); |
| 158 | tm->tm_mon = BCD2BIN(regs[MAX6900_REG_MO]) - 1; |
| 159 | tm->tm_year = BCD2BIN(regs[MAX6900_REG_YR]) + 100; |
| 160 | tm->tm_wday = BCD2BIN(regs[MAX6900_REG_DW]); |
| 161 | |
| 162 | return 0; |
| 163 | } |
| 164 | |
| 165 | static int max6900_i2c_clear_write_protect(struct i2c_client *client) |
| 166 | { |
| 167 | int rc; |
| 168 | rc = i2c_smbus_write_byte_data (client, MAX6900_REG_CONTROL_WRITE, 0); |
| 169 | if (rc < 0) { |
| 170 | dev_err(&client->dev, "%s: control register write failed\n", |
| 171 | __FUNCTION__); |
| 172 | return -EIO; |
| 173 | } |
| 174 | return 0; |
| 175 | } |
| 176 | |
| 177 | static int max6900_i2c_set_time(struct i2c_client *client, |
| 178 | struct rtc_time const *tm) |
| 179 | { |
| 180 | u8 regs[MAX6900_REG_LEN]; |
| 181 | int rc; |
| 182 | |
| 183 | rc = max6900_i2c_clear_write_protect(client); |
| 184 | if (rc < 0) |
| 185 | return rc; |
| 186 | |
| 187 | regs[MAX6900_REG_SC] = BIN2BCD(tm->tm_sec); |
| 188 | regs[MAX6900_REG_MN] = BIN2BCD(tm->tm_min); |
| 189 | regs[MAX6900_REG_HR] = BIN2BCD(tm->tm_hour); |
| 190 | regs[MAX6900_REG_DT] = BIN2BCD(tm->tm_mday); |
| 191 | regs[MAX6900_REG_MO] = BIN2BCD(tm->tm_mon + 1); |
| 192 | regs[MAX6900_REG_YR] = BIN2BCD(tm->tm_year - 100); |
| 193 | regs[MAX6900_REG_DW] = BIN2BCD(tm->tm_wday); |
| 194 | regs[MAX6900_REG_CT] = MAX6900_REG_CT_WP; /* set write protect */ |
| 195 | |
| 196 | rc = max6900_i2c_write_regs(client, regs); |
| 197 | if (rc < 0) |
| 198 | return rc; |
| 199 | |
| 200 | return 0; |
| 201 | } |
| 202 | |
| 203 | static int max6900_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| 204 | { |
| 205 | return max6900_i2c_read_time(to_i2c_client(dev), tm); |
| 206 | } |
| 207 | |
| 208 | static int max6900_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| 209 | { |
| 210 | return max6900_i2c_set_time(to_i2c_client(dev), tm); |
| 211 | } |
| 212 | |
| 213 | static int max6900_attach_adapter(struct i2c_adapter *adapter) |
| 214 | { |
| 215 | return i2c_probe(adapter, &addr_data, max6900_probe); |
| 216 | } |
| 217 | |
| 218 | static int max6900_detach_client(struct i2c_client *client) |
| 219 | { |
| 220 | struct rtc_device *const rtc = i2c_get_clientdata(client); |
| 221 | |
| 222 | if (rtc) |
| 223 | rtc_device_unregister(rtc); |
| 224 | |
| 225 | return i2c_detach_client(client); |
| 226 | } |
| 227 | |
| 228 | static struct i2c_driver max6900_driver = { |
| 229 | .driver = { |
| 230 | .name = DRV_NAME, |
| 231 | }, |
| 232 | .id = I2C_DRIVERID_MAX6900, |
| 233 | .attach_adapter = max6900_attach_adapter, |
| 234 | .detach_client = max6900_detach_client, |
| 235 | }; |
| 236 | |
| 237 | static const struct rtc_class_ops max6900_rtc_ops = { |
| 238 | .read_time = max6900_rtc_read_time, |
| 239 | .set_time = max6900_rtc_set_time, |
| 240 | }; |
| 241 | |
| 242 | static int max6900_probe(struct i2c_adapter *adapter, int addr, int kind) |
| 243 | { |
| 244 | int rc = 0; |
| 245 | struct i2c_client *client = NULL; |
| 246 | struct rtc_device *rtc = NULL; |
| 247 | |
| 248 | if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { |
| 249 | rc = -ENODEV; |
| 250 | goto failout; |
| 251 | } |
| 252 | |
| 253 | client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); |
| 254 | if (client == NULL) { |
| 255 | rc = -ENOMEM; |
| 256 | goto failout; |
| 257 | } |
| 258 | |
| 259 | client->addr = addr; |
| 260 | client->adapter = adapter; |
| 261 | client->driver = &max6900_driver; |
| 262 | strlcpy(client->name, DRV_NAME, I2C_NAME_SIZE); |
| 263 | |
| 264 | if (kind < 0) { |
| 265 | rc = max6900_i2c_validate_client(client); |
| 266 | if (rc < 0) |
| 267 | goto failout; |
| 268 | } |
| 269 | |
| 270 | rc = i2c_attach_client(client); |
| 271 | if (rc < 0) |
| 272 | goto failout; |
| 273 | |
| 274 | dev_info(&client->dev, |
| 275 | "chip found, driver version " DRV_VERSION "\n"); |
| 276 | |
| 277 | rtc = rtc_device_register(max6900_driver.driver.name, |
| 278 | &client->dev, |
| 279 | &max6900_rtc_ops, THIS_MODULE); |
| 280 | if (IS_ERR(rtc)) { |
| 281 | rc = PTR_ERR(rtc); |
| 282 | goto failout_detach; |
| 283 | } |
| 284 | |
| 285 | i2c_set_clientdata(client, rtc); |
| 286 | |
| 287 | return 0; |
| 288 | |
| 289 | failout_detach: |
| 290 | i2c_detach_client(client); |
| 291 | failout: |
| 292 | kfree(client); |
| 293 | return rc; |
| 294 | } |
| 295 | |
| 296 | static int __init max6900_init(void) |
| 297 | { |
| 298 | return i2c_add_driver(&max6900_driver); |
| 299 | } |
| 300 | |
| 301 | static void __exit max6900_exit(void) |
| 302 | { |
| 303 | i2c_del_driver(&max6900_driver); |
| 304 | } |
| 305 | |
| 306 | MODULE_DESCRIPTION("Maxim MAX6900 RTC driver"); |
| 307 | MODULE_LICENSE("GPL"); |
| 308 | MODULE_VERSION(DRV_VERSION); |
| 309 | |
| 310 | module_init(max6900_init); |
| 311 | module_exit(max6900_exit); |