Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 1 | /* |
| 2 | * saa7706.c Philips SAA7706H Car Radio DSP driver |
| 3 | * Copyright (c) 2009 Intel Corporation |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License version 2 as |
| 7 | * published by the Free Software Foundation. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, |
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 12 | * GNU General Public License for more details. |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 13 | */ |
| 14 | |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/init.h> |
| 17 | #include <linux/delay.h> |
| 18 | #include <linux/errno.h> |
| 19 | #include <linux/kernel.h> |
| 20 | #include <linux/interrupt.h> |
| 21 | #include <linux/i2c.h> |
Tejun Heo | 5a0e3ad | 2010-03-24 17:04:11 +0900 | [diff] [blame] | 22 | #include <linux/slab.h> |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 23 | #include <media/v4l2-device.h> |
Hans Verkuil | 8ff6183 | 2013-06-10 04:50:11 -0300 | [diff] [blame] | 24 | #include <media/v4l2-ctrls.h> |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 25 | |
| 26 | #define DRIVER_NAME "saa7706h" |
| 27 | |
| 28 | /* the I2C memory map looks like this |
| 29 | |
| 30 | $1C00 - $FFFF Not Used |
| 31 | $2200 - $3FFF Reserved YRAM (DSP2) space |
| 32 | $2000 - $21FF YRAM (DSP2) |
| 33 | $1FF0 - $1FFF Hardware Registers |
| 34 | $1280 - $1FEF Reserved XRAM (DSP2) space |
| 35 | $1000 - $127F XRAM (DSP2) |
| 36 | $0FFF DSP CONTROL |
| 37 | $0A00 - $0FFE Reserved |
| 38 | $0980 - $09FF Reserved YRAM (DSP1) space |
| 39 | $0800 - $097F YRAM (DSP1) |
| 40 | $0200 - $07FF Not Used |
| 41 | $0180 - $01FF Reserved XRAM (DSP1) space |
| 42 | $0000 - $017F XRAM (DSP1) |
| 43 | */ |
| 44 | |
| 45 | #define SAA7706H_REG_CTRL 0x0fff |
| 46 | #define SAA7706H_CTRL_BYP_PLL 0x0001 |
| 47 | #define SAA7706H_CTRL_PLL_DIV_MASK 0x003e |
| 48 | #define SAA7706H_CTRL_PLL3_62975MHZ 0x003e |
| 49 | #define SAA7706H_CTRL_DSP_TURBO 0x0040 |
| 50 | #define SAA7706H_CTRL_PC_RESET_DSP1 0x0080 |
| 51 | #define SAA7706H_CTRL_PC_RESET_DSP2 0x0100 |
| 52 | #define SAA7706H_CTRL_DSP1_ROM_EN_MASK 0x0600 |
| 53 | #define SAA7706H_CTRL_DSP1_FUNC_PROM 0x0000 |
| 54 | #define SAA7706H_CTRL_DSP2_ROM_EN_MASK 0x1800 |
| 55 | #define SAA7706H_CTRL_DSP2_FUNC_PROM 0x0000 |
| 56 | #define SAA7706H_CTRL_DIG_SIL_INTERPOL 0x8000 |
| 57 | |
| 58 | #define SAA7706H_REG_EVALUATION 0x1ff0 |
| 59 | #define SAA7706H_EVAL_DISABLE_CHARGE_PUMP 0x000001 |
| 60 | #define SAA7706H_EVAL_DCS_CLOCK 0x000002 |
| 61 | #define SAA7706H_EVAL_GNDRC1_ENABLE 0x000004 |
| 62 | #define SAA7706H_EVAL_GNDRC2_ENABLE 0x000008 |
| 63 | |
| 64 | #define SAA7706H_REG_CL_GEN1 0x1ff3 |
| 65 | #define SAA7706H_CL_GEN1_MIN_LOOPGAIN_MASK 0x00000f |
| 66 | #define SAA7706H_CL_GEN1_LOOPGAIN_MASK 0x0000f0 |
| 67 | #define SAA7706H_CL_GEN1_COARSE_RATION 0xffff00 |
| 68 | |
| 69 | #define SAA7706H_REG_CL_GEN2 0x1ff4 |
| 70 | #define SAA7706H_CL_GEN2_WSEDGE_FALLING 0x000001 |
| 71 | #define SAA7706H_CL_GEN2_STOP_VCO 0x000002 |
| 72 | #define SAA7706H_CL_GEN2_FRERUN 0x000004 |
| 73 | #define SAA7706H_CL_GEN2_ADAPTIVE 0x000008 |
| 74 | #define SAA7706H_CL_GEN2_FINE_RATIO_MASK 0x0ffff0 |
| 75 | |
| 76 | #define SAA7706H_REG_CL_GEN4 0x1ff6 |
| 77 | #define SAA7706H_CL_GEN4_BYPASS_PLL1 0x001000 |
| 78 | #define SAA7706H_CL_GEN4_PLL1_DIV_MASK 0x03e000 |
| 79 | #define SAA7706H_CL_GEN4_DSP1_TURBO 0x040000 |
| 80 | |
| 81 | #define SAA7706H_REG_SEL 0x1ff7 |
| 82 | #define SAA7706H_SEL_DSP2_SRCA_MASK 0x000007 |
| 83 | #define SAA7706H_SEL_DSP2_FMTA_MASK 0x000031 |
| 84 | #define SAA7706H_SEL_DSP2_SRCB_MASK 0x0001c0 |
| 85 | #define SAA7706H_SEL_DSP2_FMTB_MASK 0x000e00 |
| 86 | #define SAA7706H_SEL_DSP1_SRC_MASK 0x003000 |
| 87 | #define SAA7706H_SEL_DSP1_FMT_MASK 0x01c003 |
| 88 | #define SAA7706H_SEL_SPDIF2 0x020000 |
| 89 | #define SAA7706H_SEL_HOST_IO_FMT_MASK 0x1c0000 |
| 90 | #define SAA7706H_SEL_EN_HOST_IO 0x200000 |
| 91 | |
| 92 | #define SAA7706H_REG_IAC 0x1ff8 |
| 93 | #define SAA7706H_REG_CLK_SET 0x1ff9 |
| 94 | #define SAA7706H_REG_CLK_COEFF 0x1ffa |
| 95 | #define SAA7706H_REG_INPUT_SENS 0x1ffb |
| 96 | #define SAA7706H_INPUT_SENS_RDS_VOL_MASK 0x0003f |
| 97 | #define SAA7706H_INPUT_SENS_FM_VOL_MASK 0x00fc0 |
| 98 | #define SAA7706H_INPUT_SENS_FM_MPX 0x01000 |
| 99 | #define SAA7706H_INPUT_SENS_OFF_FILTER_A_EN 0x02000 |
| 100 | #define SAA7706H_INPUT_SENS_OFF_FILTER_B_EN 0x04000 |
| 101 | #define SAA7706H_REG_PHONE_NAV_AUDIO 0x1ffc |
| 102 | #define SAA7706H_REG_IO_CONF_DSP2 0x1ffd |
| 103 | #define SAA7706H_REG_STATUS_DSP2 0x1ffe |
| 104 | #define SAA7706H_REG_PC_DSP2 0x1fff |
| 105 | |
| 106 | #define SAA7706H_DSP1_MOD0 0x0800 |
| 107 | #define SAA7706H_DSP1_ROM_VER 0x097f |
| 108 | #define SAA7706H_DSP2_MPTR0 0x1000 |
| 109 | |
| 110 | #define SAA7706H_DSP1_MODPNTR 0x0000 |
| 111 | |
| 112 | #define SAA7706H_DSP2_XMEM_CONTLLCW 0x113e |
| 113 | #define SAA7706H_DSP2_XMEM_BUSAMP 0x114a |
| 114 | #define SAA7706H_DSP2_XMEM_FDACPNTR 0x11f9 |
| 115 | #define SAA7706H_DSP2_XMEM_IIS1PNTR 0x11fb |
| 116 | |
| 117 | #define SAA7706H_DSP2_YMEM_PVGA 0x212a |
| 118 | #define SAA7706H_DSP2_YMEM_PVAT1 0x212b |
| 119 | #define SAA7706H_DSP2_YMEM_PVAT 0x212c |
| 120 | #define SAA7706H_DSP2_YMEM_ROM_VER 0x21ff |
| 121 | |
| 122 | #define SUPPORTED_DSP1_ROM_VER 0x667 |
| 123 | |
| 124 | struct saa7706h_state { |
| 125 | struct v4l2_subdev sd; |
Hans Verkuil | 8ff6183 | 2013-06-10 04:50:11 -0300 | [diff] [blame] | 126 | struct v4l2_ctrl_handler hdl; |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 127 | unsigned muted; |
| 128 | }; |
| 129 | |
| 130 | static inline struct saa7706h_state *to_state(struct v4l2_subdev *sd) |
| 131 | { |
| 132 | return container_of(sd, struct saa7706h_state, sd); |
| 133 | } |
| 134 | |
| 135 | static int saa7706h_i2c_send(struct i2c_client *client, const u8 *data, int len) |
| 136 | { |
| 137 | int err = i2c_master_send(client, data, len); |
| 138 | if (err == len) |
| 139 | return 0; |
| 140 | return err > 0 ? -EIO : err; |
| 141 | } |
| 142 | |
| 143 | static int saa7706h_i2c_transfer(struct i2c_client *client, |
| 144 | struct i2c_msg *msgs, int num) |
| 145 | { |
| 146 | int err = i2c_transfer(client->adapter, msgs, num); |
| 147 | if (err == num) |
| 148 | return 0; |
| 149 | return err > 0 ? -EIO : err; |
| 150 | } |
| 151 | |
| 152 | static int saa7706h_set_reg24(struct v4l2_subdev *sd, u16 reg, u32 val) |
| 153 | { |
| 154 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 155 | u8 buf[5]; |
| 156 | int pos = 0; |
| 157 | |
| 158 | buf[pos++] = reg >> 8; |
| 159 | buf[pos++] = reg; |
| 160 | buf[pos++] = val >> 16; |
| 161 | buf[pos++] = val >> 8; |
| 162 | buf[pos++] = val; |
| 163 | |
| 164 | return saa7706h_i2c_send(client, buf, pos); |
| 165 | } |
| 166 | |
| 167 | static int saa7706h_set_reg24_err(struct v4l2_subdev *sd, u16 reg, u32 val, |
| 168 | int *err) |
| 169 | { |
| 170 | return *err ? *err : saa7706h_set_reg24(sd, reg, val); |
| 171 | } |
| 172 | |
| 173 | static int saa7706h_set_reg16(struct v4l2_subdev *sd, u16 reg, u16 val) |
| 174 | { |
| 175 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 176 | u8 buf[4]; |
| 177 | int pos = 0; |
| 178 | |
| 179 | buf[pos++] = reg >> 8; |
| 180 | buf[pos++] = reg; |
| 181 | buf[pos++] = val >> 8; |
| 182 | buf[pos++] = val; |
| 183 | |
| 184 | return saa7706h_i2c_send(client, buf, pos); |
| 185 | } |
| 186 | |
| 187 | static int saa7706h_set_reg16_err(struct v4l2_subdev *sd, u16 reg, u16 val, |
| 188 | int *err) |
| 189 | { |
| 190 | return *err ? *err : saa7706h_set_reg16(sd, reg, val); |
| 191 | } |
| 192 | |
| 193 | static int saa7706h_get_reg16(struct v4l2_subdev *sd, u16 reg) |
| 194 | { |
| 195 | struct i2c_client *client = v4l2_get_subdevdata(sd); |
| 196 | u8 buf[2]; |
| 197 | int err; |
| 198 | u8 regaddr[] = {reg >> 8, reg}; |
Shubhrajyoti D | c43737a | 2012-09-18 08:22:35 -0300 | [diff] [blame] | 199 | struct i2c_msg msg[] = { |
| 200 | { |
| 201 | .addr = client->addr, |
| 202 | .len = sizeof(regaddr), |
| 203 | .buf = regaddr |
| 204 | }, |
| 205 | { |
| 206 | .addr = client->addr, |
| 207 | .flags = I2C_M_RD, |
| 208 | .len = sizeof(buf), |
| 209 | .buf = buf |
| 210 | } |
| 211 | }; |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 212 | |
| 213 | err = saa7706h_i2c_transfer(client, msg, ARRAY_SIZE(msg)); |
| 214 | if (err) |
| 215 | return err; |
| 216 | |
| 217 | return buf[0] << 8 | buf[1]; |
| 218 | } |
| 219 | |
| 220 | static int saa7706h_unmute(struct v4l2_subdev *sd) |
| 221 | { |
| 222 | struct saa7706h_state *state = to_state(sd); |
| 223 | int err = 0; |
| 224 | |
| 225 | err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL, |
| 226 | SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 | |
| 227 | SAA7706H_CTRL_PC_RESET_DSP2, &err); |
| 228 | |
| 229 | /* newer versions of the chip requires a small sleep after reset */ |
| 230 | msleep(1); |
| 231 | |
| 232 | err = saa7706h_set_reg16_err(sd, SAA7706H_REG_CTRL, |
| 233 | SAA7706H_CTRL_PLL3_62975MHZ, &err); |
| 234 | |
| 235 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_EVALUATION, 0, &err); |
| 236 | |
| 237 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN1, 0x040022, &err); |
| 238 | |
| 239 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN2, |
| 240 | SAA7706H_CL_GEN2_WSEDGE_FALLING, &err); |
| 241 | |
| 242 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CL_GEN4, 0x024080, &err); |
| 243 | |
| 244 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_SEL, 0x200080, &err); |
| 245 | |
| 246 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IAC, 0xf4caed, &err); |
| 247 | |
| 248 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_SET, 0x124334, &err); |
| 249 | |
| 250 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_CLK_COEFF, 0x004a1a, |
| 251 | &err); |
| 252 | |
| 253 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_INPUT_SENS, 0x0071c7, |
| 254 | &err); |
| 255 | |
| 256 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PHONE_NAV_AUDIO, |
| 257 | 0x0e22ff, &err); |
| 258 | |
| 259 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_IO_CONF_DSP2, 0x001ff8, |
| 260 | &err); |
| 261 | |
| 262 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_STATUS_DSP2, 0x080003, |
| 263 | &err); |
| 264 | |
| 265 | err = saa7706h_set_reg24_err(sd, SAA7706H_REG_PC_DSP2, 0x000004, &err); |
| 266 | |
| 267 | err = saa7706h_set_reg16_err(sd, SAA7706H_DSP1_MOD0, 0x0c6c, &err); |
| 268 | |
| 269 | err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_MPTR0, 0x000b4b, &err); |
| 270 | |
| 271 | err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x000600, &err); |
| 272 | |
| 273 | err = saa7706h_set_reg24_err(sd, SAA7706H_DSP1_MODPNTR, 0x0000c0, &err); |
| 274 | |
| 275 | err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000819, |
| 276 | &err); |
| 277 | |
| 278 | err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x00085a, |
| 279 | &err); |
| 280 | |
| 281 | err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_BUSAMP, 0x7fffff, |
| 282 | &err); |
| 283 | |
| 284 | err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_FDACPNTR, 0x2000cb, |
| 285 | &err); |
| 286 | |
| 287 | err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_IIS1PNTR, 0x2000cb, |
| 288 | &err); |
| 289 | |
| 290 | err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVGA, 0x0f80, &err); |
| 291 | |
| 292 | err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT1, 0x0800, |
| 293 | &err); |
| 294 | |
| 295 | err = saa7706h_set_reg16_err(sd, SAA7706H_DSP2_YMEM_PVAT, 0x0800, &err); |
| 296 | |
| 297 | err = saa7706h_set_reg24_err(sd, SAA7706H_DSP2_XMEM_CONTLLCW, 0x000905, |
| 298 | &err); |
| 299 | if (!err) |
| 300 | state->muted = 0; |
| 301 | return err; |
| 302 | } |
| 303 | |
| 304 | static int saa7706h_mute(struct v4l2_subdev *sd) |
| 305 | { |
| 306 | struct saa7706h_state *state = to_state(sd); |
| 307 | int err; |
| 308 | |
| 309 | err = saa7706h_set_reg16(sd, SAA7706H_REG_CTRL, |
| 310 | SAA7706H_CTRL_PLL3_62975MHZ | SAA7706H_CTRL_PC_RESET_DSP1 | |
| 311 | SAA7706H_CTRL_PC_RESET_DSP2); |
| 312 | if (!err) |
| 313 | state->muted = 1; |
| 314 | return err; |
| 315 | } |
| 316 | |
Hans Verkuil | 8ff6183 | 2013-06-10 04:50:11 -0300 | [diff] [blame] | 317 | static int saa7706h_s_ctrl(struct v4l2_ctrl *ctrl) |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 318 | { |
Hans Verkuil | 8ff6183 | 2013-06-10 04:50:11 -0300 | [diff] [blame] | 319 | struct saa7706h_state *state = |
| 320 | container_of(ctrl->handler, struct saa7706h_state, hdl); |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 321 | |
| 322 | switch (ctrl->id) { |
| 323 | case V4L2_CID_AUDIO_MUTE: |
Hans Verkuil | 8ff6183 | 2013-06-10 04:50:11 -0300 | [diff] [blame] | 324 | if (ctrl->val) |
| 325 | return saa7706h_mute(&state->sd); |
| 326 | return saa7706h_unmute(&state->sd); |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 327 | } |
| 328 | return -EINVAL; |
| 329 | } |
| 330 | |
Hans Verkuil | 8ff6183 | 2013-06-10 04:50:11 -0300 | [diff] [blame] | 331 | static const struct v4l2_ctrl_ops saa7706h_ctrl_ops = { |
| 332 | .s_ctrl = saa7706h_s_ctrl, |
| 333 | }; |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 334 | |
Ricardo Ribalda | 387a692 | 2015-06-12 13:31:18 -0300 | [diff] [blame] | 335 | static const struct v4l2_subdev_ops empty_ops = {}; |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 336 | |
| 337 | /* |
| 338 | * Generic i2c probe |
| 339 | * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1' |
| 340 | */ |
| 341 | |
Greg Kroah-Hartman | 4c62e97 | 2012-12-21 13:17:53 -0800 | [diff] [blame] | 342 | static int saa7706h_probe(struct i2c_client *client, |
| 343 | const struct i2c_device_id *id) |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 344 | { |
| 345 | struct saa7706h_state *state; |
| 346 | struct v4l2_subdev *sd; |
| 347 | int err; |
| 348 | |
| 349 | /* Check if the adapter supports the needed features */ |
| 350 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| 351 | return -EIO; |
| 352 | |
| 353 | v4l_info(client, "chip found @ 0x%02x (%s)\n", |
| 354 | client->addr << 1, client->adapter->name); |
| 355 | |
Herton Ronaldo Krzesinski | 80845a3 | 2011-04-01 14:12:02 -0300 | [diff] [blame] | 356 | state = kzalloc(sizeof(struct saa7706h_state), GFP_KERNEL); |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 357 | if (state == NULL) |
| 358 | return -ENOMEM; |
| 359 | sd = &state->sd; |
Ricardo Ribalda | 387a692 | 2015-06-12 13:31:18 -0300 | [diff] [blame] | 360 | v4l2_i2c_subdev_init(sd, client, &empty_ops); |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 361 | |
Hans Verkuil | 8ff6183 | 2013-06-10 04:50:11 -0300 | [diff] [blame] | 362 | v4l2_ctrl_handler_init(&state->hdl, 4); |
| 363 | v4l2_ctrl_new_std(&state->hdl, &saa7706h_ctrl_ops, |
| 364 | V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); |
| 365 | sd->ctrl_handler = &state->hdl; |
| 366 | err = state->hdl.error; |
| 367 | if (err) |
| 368 | goto err; |
| 369 | |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 370 | /* check the rom versions */ |
| 371 | err = saa7706h_get_reg16(sd, SAA7706H_DSP1_ROM_VER); |
| 372 | if (err < 0) |
| 373 | goto err; |
| 374 | if (err != SUPPORTED_DSP1_ROM_VER) |
| 375 | v4l2_warn(sd, "Unknown DSP1 ROM code version: 0x%x\n", err); |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 376 | state->muted = 1; |
| 377 | |
| 378 | /* startup in a muted state */ |
| 379 | err = saa7706h_mute(sd); |
| 380 | if (err) |
| 381 | goto err; |
| 382 | |
| 383 | return 0; |
| 384 | |
| 385 | err: |
| 386 | v4l2_device_unregister_subdev(sd); |
Hans Verkuil | 8ff6183 | 2013-06-10 04:50:11 -0300 | [diff] [blame] | 387 | v4l2_ctrl_handler_free(&state->hdl); |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 388 | kfree(to_state(sd)); |
| 389 | |
| 390 | printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err); |
| 391 | |
| 392 | return err; |
| 393 | } |
| 394 | |
Greg Kroah-Hartman | 4c62e97 | 2012-12-21 13:17:53 -0800 | [diff] [blame] | 395 | static int saa7706h_remove(struct i2c_client *client) |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 396 | { |
| 397 | struct v4l2_subdev *sd = i2c_get_clientdata(client); |
Hans Verkuil | 8ff6183 | 2013-06-10 04:50:11 -0300 | [diff] [blame] | 398 | struct saa7706h_state *state = to_state(sd); |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 399 | |
| 400 | saa7706h_mute(sd); |
| 401 | v4l2_device_unregister_subdev(sd); |
Hans Verkuil | 8ff6183 | 2013-06-10 04:50:11 -0300 | [diff] [blame] | 402 | v4l2_ctrl_handler_free(&state->hdl); |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 403 | kfree(to_state(sd)); |
| 404 | return 0; |
| 405 | } |
| 406 | |
| 407 | static const struct i2c_device_id saa7706h_id[] = { |
| 408 | {DRIVER_NAME, 0}, |
| 409 | {}, |
| 410 | }; |
| 411 | |
| 412 | MODULE_DEVICE_TABLE(i2c, saa7706h_id); |
| 413 | |
| 414 | static struct i2c_driver saa7706h_driver = { |
| 415 | .driver = { |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 416 | .name = DRIVER_NAME, |
| 417 | }, |
| 418 | .probe = saa7706h_probe, |
Greg Kroah-Hartman | 4c62e97 | 2012-12-21 13:17:53 -0800 | [diff] [blame] | 419 | .remove = saa7706h_remove, |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 420 | .id_table = saa7706h_id, |
| 421 | }; |
| 422 | |
Axel Lin | c6e8d86 | 2012-02-12 06:56:32 -0300 | [diff] [blame] | 423 | module_i2c_driver(saa7706h_driver); |
Richard Röjfors | ee4b9db | 2010-02-02 19:40:49 -0300 | [diff] [blame] | 424 | |
| 425 | MODULE_DESCRIPTION("SAA7706H Car Radio DSP driver"); |
| 426 | MODULE_AUTHOR("Mocean Laboratories"); |
| 427 | MODULE_LICENSE("GPL v2"); |