Alexander Shiyan | ef74d46 | 2014-06-19 20:20:43 +0400 | [diff] [blame] | 1 | /* |
| 2 | * Cirrus Logic CLPS711X FB driver |
| 3 | * |
| 4 | * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> |
| 5 | * Based on driver by Russell King <rmk@arm.linux.org.uk> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License as published by |
| 9 | * the Free Software Foundation; either version 2 of the License, or |
| 10 | * (at your option) any later version. |
| 11 | */ |
| 12 | |
| 13 | #include <linux/clk.h> |
| 14 | #include <linux/fb.h> |
| 15 | #include <linux/io.h> |
| 16 | #include <linux/lcd.h> |
| 17 | #include <linux/module.h> |
| 18 | #include <linux/of.h> |
| 19 | #include <linux/platform_device.h> |
| 20 | #include <linux/regmap.h> |
| 21 | #include <linux/mfd/syscon.h> |
| 22 | #include <linux/mfd/syscon/clps711x.h> |
| 23 | #include <linux/regulator/consumer.h> |
| 24 | #include <video/of_display_timing.h> |
| 25 | |
| 26 | #define CLPS711X_FB_NAME "clps711x-fb" |
| 27 | #define CLPS711X_FB_BPP_MAX (4) |
| 28 | |
| 29 | /* Registers relative to LCDCON */ |
| 30 | #define CLPS711X_LCDCON (0x0000) |
| 31 | # define LCDCON_GSEN BIT(30) |
| 32 | # define LCDCON_GSMD BIT(31) |
| 33 | #define CLPS711X_PALLSW (0x0280) |
| 34 | #define CLPS711X_PALMSW (0x02c0) |
| 35 | #define CLPS711X_FBADDR (0x0d40) |
| 36 | |
| 37 | struct clps711x_fb_info { |
| 38 | struct clk *clk; |
| 39 | void __iomem *base; |
| 40 | struct regmap *syscon; |
| 41 | resource_size_t buffsize; |
| 42 | struct fb_videomode mode; |
| 43 | struct regulator *lcd_pwr; |
| 44 | u32 ac_prescale; |
| 45 | bool cmap_invert; |
| 46 | }; |
| 47 | |
| 48 | static int clps711x_fb_setcolreg(u_int regno, u_int red, u_int green, |
| 49 | u_int blue, u_int transp, struct fb_info *info) |
| 50 | { |
| 51 | struct clps711x_fb_info *cfb = info->par; |
| 52 | u32 level, mask, shift; |
| 53 | |
| 54 | if (regno >= BIT(info->var.bits_per_pixel)) |
| 55 | return -EINVAL; |
| 56 | |
| 57 | shift = 4 * (regno & 7); |
| 58 | mask = 0xf << shift; |
| 59 | /* gray = 0.30*R + 0.58*G + 0.11*B */ |
| 60 | level = (((red * 77 + green * 151 + blue * 28) >> 20) << shift) & mask; |
| 61 | if (cfb->cmap_invert) |
| 62 | level = 0xf - level; |
| 63 | |
| 64 | regno = (regno < 8) ? CLPS711X_PALLSW : CLPS711X_PALMSW; |
| 65 | |
| 66 | writel((readl(cfb->base + regno) & ~mask) | level, cfb->base + regno); |
| 67 | |
| 68 | return 0; |
| 69 | } |
| 70 | |
| 71 | static int clps711x_fb_check_var(struct fb_var_screeninfo *var, |
| 72 | struct fb_info *info) |
| 73 | { |
| 74 | u32 val; |
| 75 | |
| 76 | if (var->bits_per_pixel < 1 || |
| 77 | var->bits_per_pixel > CLPS711X_FB_BPP_MAX) |
| 78 | return -EINVAL; |
| 79 | |
| 80 | if (!var->pixclock) |
| 81 | return -EINVAL; |
| 82 | |
| 83 | val = DIV_ROUND_UP(var->xres, 16) - 1; |
| 84 | if (val < 0x01 || val > 0x3f) |
| 85 | return -EINVAL; |
| 86 | |
| 87 | val = DIV_ROUND_UP(var->yres * var->xres * var->bits_per_pixel, 128); |
| 88 | val--; |
| 89 | if (val < 0x001 || val > 0x1fff) |
| 90 | return -EINVAL; |
| 91 | |
| 92 | var->transp.msb_right = 0; |
| 93 | var->transp.offset = 0; |
| 94 | var->transp.length = 0; |
| 95 | var->red.msb_right = 0; |
| 96 | var->red.offset = 0; |
| 97 | var->red.length = var->bits_per_pixel; |
| 98 | var->green = var->red; |
| 99 | var->blue = var->red; |
| 100 | var->grayscale = var->bits_per_pixel > 1; |
| 101 | |
| 102 | return 0; |
| 103 | } |
| 104 | |
| 105 | static int clps711x_fb_set_par(struct fb_info *info) |
| 106 | { |
| 107 | struct clps711x_fb_info *cfb = info->par; |
| 108 | resource_size_t size; |
| 109 | u32 lcdcon, pps; |
| 110 | |
| 111 | size = (info->var.xres * info->var.yres * info->var.bits_per_pixel) / 8; |
| 112 | if (size > cfb->buffsize) |
| 113 | return -EINVAL; |
| 114 | |
| 115 | switch (info->var.bits_per_pixel) { |
| 116 | case 1: |
| 117 | info->fix.visual = FB_VISUAL_MONO01; |
| 118 | break; |
| 119 | case 2: |
| 120 | case 4: |
| 121 | info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| 122 | break; |
| 123 | default: |
| 124 | return -EINVAL; |
| 125 | } |
| 126 | |
| 127 | info->fix.line_length = info->var.xres * info->var.bits_per_pixel / 8; |
| 128 | info->fix.smem_len = size; |
| 129 | |
| 130 | lcdcon = (info->var.xres * info->var.yres * |
| 131 | info->var.bits_per_pixel) / 128 - 1; |
| 132 | lcdcon |= ((info->var.xres / 16) - 1) << 13; |
| 133 | lcdcon |= (cfb->ac_prescale & 0x1f) << 25; |
| 134 | |
| 135 | pps = clk_get_rate(cfb->clk) / (PICOS2KHZ(info->var.pixclock) * 1000); |
| 136 | if (pps) |
| 137 | pps--; |
| 138 | lcdcon |= (pps & 0x3f) << 19; |
| 139 | |
| 140 | if (info->var.bits_per_pixel == 4) |
| 141 | lcdcon |= LCDCON_GSMD; |
| 142 | if (info->var.bits_per_pixel >= 2) |
| 143 | lcdcon |= LCDCON_GSEN; |
| 144 | |
| 145 | /* LCDCON must only be changed while the LCD is disabled */ |
| 146 | regmap_update_bits(cfb->syscon, SYSCON_OFFSET, SYSCON1_LCDEN, 0); |
| 147 | writel(lcdcon, cfb->base + CLPS711X_LCDCON); |
| 148 | regmap_update_bits(cfb->syscon, SYSCON_OFFSET, |
| 149 | SYSCON1_LCDEN, SYSCON1_LCDEN); |
| 150 | |
| 151 | return 0; |
| 152 | } |
| 153 | |
| 154 | static int clps711x_fb_blank(int blank, struct fb_info *info) |
| 155 | { |
| 156 | /* Return happy */ |
| 157 | return 0; |
| 158 | } |
| 159 | |
| 160 | static struct fb_ops clps711x_fb_ops = { |
| 161 | .owner = THIS_MODULE, |
| 162 | .fb_setcolreg = clps711x_fb_setcolreg, |
| 163 | .fb_check_var = clps711x_fb_check_var, |
| 164 | .fb_set_par = clps711x_fb_set_par, |
| 165 | .fb_blank = clps711x_fb_blank, |
| 166 | .fb_fillrect = sys_fillrect, |
| 167 | .fb_copyarea = sys_copyarea, |
| 168 | .fb_imageblit = sys_imageblit, |
| 169 | }; |
| 170 | |
| 171 | static int clps711x_lcd_check_fb(struct lcd_device *lcddev, struct fb_info *fi) |
| 172 | { |
| 173 | struct clps711x_fb_info *cfb = dev_get_drvdata(&lcddev->dev); |
| 174 | |
| 175 | return (!fi || fi->par == cfb) ? 1 : 0; |
| 176 | } |
| 177 | |
| 178 | static int clps711x_lcd_get_power(struct lcd_device *lcddev) |
| 179 | { |
| 180 | struct clps711x_fb_info *cfb = dev_get_drvdata(&lcddev->dev); |
| 181 | |
| 182 | if (!IS_ERR_OR_NULL(cfb->lcd_pwr)) |
| 183 | if (!regulator_is_enabled(cfb->lcd_pwr)) |
| 184 | return FB_BLANK_NORMAL; |
| 185 | |
| 186 | return FB_BLANK_UNBLANK; |
| 187 | } |
| 188 | |
| 189 | static int clps711x_lcd_set_power(struct lcd_device *lcddev, int blank) |
| 190 | { |
| 191 | struct clps711x_fb_info *cfb = dev_get_drvdata(&lcddev->dev); |
| 192 | |
| 193 | if (!IS_ERR_OR_NULL(cfb->lcd_pwr)) { |
| 194 | if (blank == FB_BLANK_UNBLANK) { |
| 195 | if (!regulator_is_enabled(cfb->lcd_pwr)) |
| 196 | return regulator_enable(cfb->lcd_pwr); |
| 197 | } else { |
| 198 | if (regulator_is_enabled(cfb->lcd_pwr)) |
| 199 | return regulator_disable(cfb->lcd_pwr); |
| 200 | } |
| 201 | } |
| 202 | |
| 203 | return 0; |
| 204 | } |
| 205 | |
| 206 | static struct lcd_ops clps711x_lcd_ops = { |
| 207 | .check_fb = clps711x_lcd_check_fb, |
| 208 | .get_power = clps711x_lcd_get_power, |
| 209 | .set_power = clps711x_lcd_set_power, |
| 210 | }; |
| 211 | |
| 212 | static int clps711x_fb_probe(struct platform_device *pdev) |
| 213 | { |
| 214 | struct device *dev = &pdev->dev; |
| 215 | struct device_node *disp, *np = dev->of_node; |
| 216 | struct clps711x_fb_info *cfb; |
| 217 | struct lcd_device *lcd; |
| 218 | struct fb_info *info; |
| 219 | struct resource *res; |
| 220 | int ret = -ENOENT; |
| 221 | u32 val; |
| 222 | |
| 223 | if (fb_get_options(CLPS711X_FB_NAME, NULL)) |
| 224 | return -ENODEV; |
| 225 | |
| 226 | info = framebuffer_alloc(sizeof(*cfb), dev); |
| 227 | if (!info) |
| 228 | return -ENOMEM; |
| 229 | |
| 230 | cfb = info->par; |
| 231 | platform_set_drvdata(pdev, info); |
| 232 | |
| 233 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 234 | if (!res) |
| 235 | goto out_fb_release; |
| 236 | cfb->base = devm_ioremap(dev, res->start, resource_size(res)); |
| 237 | if (!cfb->base) { |
| 238 | ret = -ENOMEM; |
| 239 | goto out_fb_release; |
| 240 | } |
| 241 | |
| 242 | info->fix.mmio_start = res->start; |
| 243 | info->fix.mmio_len = resource_size(res); |
| 244 | |
| 245 | res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| 246 | info->screen_base = devm_ioremap_resource(dev, res); |
| 247 | if (IS_ERR(info->screen_base)) { |
| 248 | ret = PTR_ERR(info->screen_base); |
| 249 | goto out_fb_release; |
| 250 | } |
| 251 | |
| 252 | /* Physical address should be aligned to 256 MiB */ |
| 253 | if (res->start & 0x0fffffff) { |
| 254 | ret = -EINVAL; |
| 255 | goto out_fb_release; |
| 256 | } |
| 257 | |
| 258 | info->apertures = alloc_apertures(1); |
| 259 | if (!info->apertures) { |
| 260 | ret = -ENOMEM; |
| 261 | goto out_fb_release; |
| 262 | } |
| 263 | |
| 264 | cfb->buffsize = resource_size(res); |
| 265 | info->fix.smem_start = res->start; |
| 266 | info->apertures->ranges[0].base = info->fix.smem_start; |
| 267 | info->apertures->ranges[0].size = cfb->buffsize; |
| 268 | |
| 269 | cfb->clk = devm_clk_get(dev, NULL); |
| 270 | if (IS_ERR(cfb->clk)) { |
| 271 | ret = PTR_ERR(cfb->clk); |
| 272 | goto out_fb_release; |
| 273 | } |
| 274 | |
| 275 | cfb->syscon = |
| 276 | syscon_regmap_lookup_by_compatible("cirrus,clps711x-syscon1"); |
| 277 | if (IS_ERR(cfb->syscon)) { |
| 278 | ret = PTR_ERR(cfb->syscon); |
| 279 | goto out_fb_release; |
| 280 | } |
| 281 | |
| 282 | disp = of_parse_phandle(np, "display", 0); |
| 283 | if (!disp) { |
| 284 | dev_err(&pdev->dev, "No display defined\n"); |
| 285 | ret = -ENODATA; |
| 286 | goto out_fb_release; |
| 287 | } |
| 288 | |
| 289 | ret = of_get_fb_videomode(disp, &cfb->mode, OF_USE_NATIVE_MODE); |
| 290 | if (ret) |
| 291 | goto out_fb_release; |
| 292 | |
| 293 | of_property_read_u32(disp, "ac-prescale", &cfb->ac_prescale); |
| 294 | cfb->cmap_invert = of_property_read_bool(disp, "cmap-invert"); |
| 295 | |
| 296 | ret = of_property_read_u32(disp, "bits-per-pixel", |
| 297 | &info->var.bits_per_pixel); |
| 298 | if (ret) |
| 299 | goto out_fb_release; |
| 300 | |
| 301 | /* Force disable LCD on any mismatch */ |
| 302 | if (info->fix.smem_start != (readb(cfb->base + CLPS711X_FBADDR) << 28)) |
| 303 | regmap_update_bits(cfb->syscon, SYSCON_OFFSET, |
| 304 | SYSCON1_LCDEN, 0); |
| 305 | |
| 306 | ret = regmap_read(cfb->syscon, SYSCON_OFFSET, &val); |
| 307 | if (ret) |
| 308 | goto out_fb_release; |
| 309 | |
| 310 | if (!(val & SYSCON1_LCDEN)) { |
| 311 | /* Setup start FB address */ |
| 312 | writeb(info->fix.smem_start >> 28, cfb->base + CLPS711X_FBADDR); |
| 313 | /* Clean FB memory */ |
Alexander Shiyan | b1f46dd | 2014-06-28 10:34:06 +0400 | [diff] [blame^] | 314 | memset_io(info->screen_base, 0, cfb->buffsize); |
Alexander Shiyan | ef74d46 | 2014-06-19 20:20:43 +0400 | [diff] [blame] | 315 | } |
| 316 | |
| 317 | cfb->lcd_pwr = devm_regulator_get(dev, "lcd"); |
| 318 | if (PTR_ERR(cfb->lcd_pwr) == -EPROBE_DEFER) { |
| 319 | ret = -EPROBE_DEFER; |
| 320 | goto out_fb_release; |
| 321 | } |
| 322 | |
| 323 | info->fbops = &clps711x_fb_ops; |
| 324 | info->flags = FBINFO_DEFAULT; |
| 325 | info->var.activate = FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW; |
| 326 | info->var.height = -1; |
| 327 | info->var.width = -1; |
| 328 | info->var.vmode = FB_VMODE_NONINTERLACED; |
| 329 | info->fix.type = FB_TYPE_PACKED_PIXELS; |
| 330 | info->fix.accel = FB_ACCEL_NONE; |
| 331 | strlcpy(info->fix.id, CLPS711X_FB_NAME, sizeof(info->fix.id)); |
| 332 | fb_videomode_to_var(&info->var, &cfb->mode); |
| 333 | |
| 334 | ret = fb_alloc_cmap(&info->cmap, BIT(CLPS711X_FB_BPP_MAX), 0); |
| 335 | if (ret) |
| 336 | goto out_fb_release; |
| 337 | |
| 338 | ret = fb_set_var(info, &info->var); |
| 339 | if (ret) |
| 340 | goto out_fb_dealloc_cmap; |
| 341 | |
| 342 | ret = register_framebuffer(info); |
| 343 | if (ret) |
| 344 | goto out_fb_dealloc_cmap; |
| 345 | |
| 346 | lcd = devm_lcd_device_register(dev, "clps711x-lcd", dev, cfb, |
| 347 | &clps711x_lcd_ops); |
| 348 | if (!IS_ERR(lcd)) |
| 349 | return 0; |
| 350 | |
| 351 | ret = PTR_ERR(lcd); |
| 352 | unregister_framebuffer(info); |
| 353 | |
| 354 | out_fb_dealloc_cmap: |
| 355 | regmap_update_bits(cfb->syscon, SYSCON_OFFSET, SYSCON1_LCDEN, 0); |
| 356 | fb_dealloc_cmap(&info->cmap); |
| 357 | |
| 358 | out_fb_release: |
| 359 | framebuffer_release(info); |
| 360 | |
| 361 | return ret; |
| 362 | } |
| 363 | |
| 364 | static int clps711x_fb_remove(struct platform_device *pdev) |
| 365 | { |
| 366 | struct fb_info *info = platform_get_drvdata(pdev); |
| 367 | struct clps711x_fb_info *cfb = info->par; |
| 368 | |
| 369 | regmap_update_bits(cfb->syscon, SYSCON_OFFSET, SYSCON1_LCDEN, 0); |
| 370 | |
| 371 | unregister_framebuffer(info); |
| 372 | fb_dealloc_cmap(&info->cmap); |
| 373 | framebuffer_release(info); |
| 374 | |
| 375 | return 0; |
| 376 | } |
| 377 | |
| 378 | static const struct of_device_id clps711x_fb_dt_ids[] = { |
| 379 | { .compatible = "cirrus,clps711x-fb", }, |
| 380 | { } |
| 381 | }; |
| 382 | MODULE_DEVICE_TABLE(of, clps711x_fb_dt_ids); |
| 383 | |
| 384 | static struct platform_driver clps711x_fb_driver = { |
| 385 | .driver = { |
| 386 | .name = CLPS711X_FB_NAME, |
| 387 | .owner = THIS_MODULE, |
| 388 | .of_match_table = clps711x_fb_dt_ids, |
| 389 | }, |
| 390 | .probe = clps711x_fb_probe, |
| 391 | .remove = clps711x_fb_remove, |
| 392 | }; |
| 393 | module_platform_driver(clps711x_fb_driver); |
| 394 | |
| 395 | MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); |
| 396 | MODULE_DESCRIPTION("Cirrus Logic CLPS711X FB driver"); |
| 397 | MODULE_LICENSE("GPL"); |