Sergei Shtylyov | 1233f59 | 2014-07-22 23:27:14 +0400 | [diff] [blame] | 1 | /* |
| 2 | * Renesas R-Car Gen2 PHY driver |
| 3 | * |
| 4 | * Copyright (C) 2014 Renesas Solutions Corp. |
| 5 | * Copyright (C) 2014 Cogent Embedded, Inc. |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License version 2 as |
| 9 | * published by the Free Software Foundation. |
| 10 | */ |
| 11 | |
| 12 | #include <linux/clk.h> |
| 13 | #include <linux/delay.h> |
| 14 | #include <linux/io.h> |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/of.h> |
| 17 | #include <linux/phy/phy.h> |
| 18 | #include <linux/platform_device.h> |
| 19 | #include <linux/spinlock.h> |
| 20 | |
| 21 | #include <asm/cmpxchg.h> |
| 22 | |
| 23 | #define USBHS_LPSTS 0x02 |
| 24 | #define USBHS_UGCTRL 0x80 |
| 25 | #define USBHS_UGCTRL2 0x84 |
Yoshihiro Shimoda | a3ac3d4 | 2015-04-02 17:01:11 +0900 | [diff] [blame] | 26 | #define USBHS_UGSTS 0x88 /* From technical update */ |
Sergei Shtylyov | 1233f59 | 2014-07-22 23:27:14 +0400 | [diff] [blame] | 27 | |
| 28 | /* Low Power Status register (LPSTS) */ |
| 29 | #define USBHS_LPSTS_SUSPM 0x4000 |
| 30 | |
| 31 | /* USB General control register (UGCTRL) */ |
| 32 | #define USBHS_UGCTRL_CONNECT 0x00000004 |
| 33 | #define USBHS_UGCTRL_PLLRESET 0x00000001 |
| 34 | |
| 35 | /* USB General control register 2 (UGCTRL2) */ |
| 36 | #define USBHS_UGCTRL2_USB2SEL 0x80000000 |
| 37 | #define USBHS_UGCTRL2_USB2SEL_PCI 0x00000000 |
| 38 | #define USBHS_UGCTRL2_USB2SEL_USB30 0x80000000 |
| 39 | #define USBHS_UGCTRL2_USB0SEL 0x00000030 |
| 40 | #define USBHS_UGCTRL2_USB0SEL_PCI 0x00000010 |
| 41 | #define USBHS_UGCTRL2_USB0SEL_HS_USB 0x00000030 |
| 42 | |
| 43 | /* USB General status register (UGSTS) */ |
Yoshihiro Shimoda | a3ac3d4 | 2015-04-02 17:01:11 +0900 | [diff] [blame] | 44 | #define USBHS_UGSTS_LOCK 0x00000100 /* From technical update */ |
Sergei Shtylyov | 1233f59 | 2014-07-22 23:27:14 +0400 | [diff] [blame] | 45 | |
| 46 | #define PHYS_PER_CHANNEL 2 |
| 47 | |
| 48 | struct rcar_gen2_phy { |
| 49 | struct phy *phy; |
| 50 | struct rcar_gen2_channel *channel; |
| 51 | int number; |
| 52 | u32 select_value; |
| 53 | }; |
| 54 | |
| 55 | struct rcar_gen2_channel { |
| 56 | struct device_node *of_node; |
| 57 | struct rcar_gen2_phy_driver *drv; |
| 58 | struct rcar_gen2_phy phys[PHYS_PER_CHANNEL]; |
| 59 | int selected_phy; |
| 60 | u32 select_mask; |
| 61 | }; |
| 62 | |
| 63 | struct rcar_gen2_phy_driver { |
| 64 | void __iomem *base; |
| 65 | struct clk *clk; |
| 66 | spinlock_t lock; |
| 67 | int num_channels; |
| 68 | struct rcar_gen2_channel *channels; |
| 69 | }; |
| 70 | |
| 71 | static int rcar_gen2_phy_init(struct phy *p) |
| 72 | { |
| 73 | struct rcar_gen2_phy *phy = phy_get_drvdata(p); |
| 74 | struct rcar_gen2_channel *channel = phy->channel; |
| 75 | struct rcar_gen2_phy_driver *drv = channel->drv; |
| 76 | unsigned long flags; |
| 77 | u32 ugctrl2; |
| 78 | |
| 79 | /* |
| 80 | * Try to acquire exclusive access to PHY. The first driver calling |
| 81 | * phy_init() on a given channel wins, and all attempts to use another |
| 82 | * PHY on this channel will fail until phy_exit() is called by the first |
| 83 | * driver. Achieving this with cmpxcgh() should be SMP-safe. |
| 84 | */ |
| 85 | if (cmpxchg(&channel->selected_phy, -1, phy->number) != -1) |
| 86 | return -EBUSY; |
| 87 | |
| 88 | clk_prepare_enable(drv->clk); |
| 89 | |
| 90 | spin_lock_irqsave(&drv->lock, flags); |
| 91 | ugctrl2 = readl(drv->base + USBHS_UGCTRL2); |
| 92 | ugctrl2 &= ~channel->select_mask; |
| 93 | ugctrl2 |= phy->select_value; |
| 94 | writel(ugctrl2, drv->base + USBHS_UGCTRL2); |
| 95 | spin_unlock_irqrestore(&drv->lock, flags); |
| 96 | return 0; |
| 97 | } |
| 98 | |
| 99 | static int rcar_gen2_phy_exit(struct phy *p) |
| 100 | { |
| 101 | struct rcar_gen2_phy *phy = phy_get_drvdata(p); |
| 102 | struct rcar_gen2_channel *channel = phy->channel; |
| 103 | |
| 104 | clk_disable_unprepare(channel->drv->clk); |
| 105 | |
| 106 | channel->selected_phy = -1; |
| 107 | |
| 108 | return 0; |
| 109 | } |
| 110 | |
| 111 | static int rcar_gen2_phy_power_on(struct phy *p) |
| 112 | { |
| 113 | struct rcar_gen2_phy *phy = phy_get_drvdata(p); |
| 114 | struct rcar_gen2_phy_driver *drv = phy->channel->drv; |
| 115 | void __iomem *base = drv->base; |
| 116 | unsigned long flags; |
| 117 | u32 value; |
| 118 | int err = 0, i; |
| 119 | |
| 120 | /* Skip if it's not USBHS */ |
| 121 | if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB) |
| 122 | return 0; |
| 123 | |
| 124 | spin_lock_irqsave(&drv->lock, flags); |
| 125 | |
| 126 | /* Power on USBHS PHY */ |
| 127 | value = readl(base + USBHS_UGCTRL); |
| 128 | value &= ~USBHS_UGCTRL_PLLRESET; |
| 129 | writel(value, base + USBHS_UGCTRL); |
| 130 | |
| 131 | value = readw(base + USBHS_LPSTS); |
| 132 | value |= USBHS_LPSTS_SUSPM; |
| 133 | writew(value, base + USBHS_LPSTS); |
| 134 | |
| 135 | for (i = 0; i < 20; i++) { |
| 136 | value = readl(base + USBHS_UGSTS); |
| 137 | if ((value & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) { |
| 138 | value = readl(base + USBHS_UGCTRL); |
| 139 | value |= USBHS_UGCTRL_CONNECT; |
| 140 | writel(value, base + USBHS_UGCTRL); |
| 141 | goto out; |
| 142 | } |
| 143 | udelay(1); |
| 144 | } |
| 145 | |
| 146 | /* Timed out waiting for the PLL lock */ |
| 147 | err = -ETIMEDOUT; |
| 148 | |
| 149 | out: |
| 150 | spin_unlock_irqrestore(&drv->lock, flags); |
| 151 | |
| 152 | return err; |
| 153 | } |
| 154 | |
| 155 | static int rcar_gen2_phy_power_off(struct phy *p) |
| 156 | { |
| 157 | struct rcar_gen2_phy *phy = phy_get_drvdata(p); |
| 158 | struct rcar_gen2_phy_driver *drv = phy->channel->drv; |
| 159 | void __iomem *base = drv->base; |
| 160 | unsigned long flags; |
| 161 | u32 value; |
| 162 | |
| 163 | /* Skip if it's not USBHS */ |
| 164 | if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB) |
| 165 | return 0; |
| 166 | |
| 167 | spin_lock_irqsave(&drv->lock, flags); |
| 168 | |
| 169 | /* Power off USBHS PHY */ |
| 170 | value = readl(base + USBHS_UGCTRL); |
| 171 | value &= ~USBHS_UGCTRL_CONNECT; |
| 172 | writel(value, base + USBHS_UGCTRL); |
| 173 | |
| 174 | value = readw(base + USBHS_LPSTS); |
| 175 | value &= ~USBHS_LPSTS_SUSPM; |
| 176 | writew(value, base + USBHS_LPSTS); |
| 177 | |
| 178 | value = readl(base + USBHS_UGCTRL); |
| 179 | value |= USBHS_UGCTRL_PLLRESET; |
| 180 | writel(value, base + USBHS_UGCTRL); |
| 181 | |
| 182 | spin_unlock_irqrestore(&drv->lock, flags); |
| 183 | |
| 184 | return 0; |
| 185 | } |
| 186 | |
| 187 | static struct phy_ops rcar_gen2_phy_ops = { |
| 188 | .init = rcar_gen2_phy_init, |
| 189 | .exit = rcar_gen2_phy_exit, |
| 190 | .power_on = rcar_gen2_phy_power_on, |
| 191 | .power_off = rcar_gen2_phy_power_off, |
| 192 | .owner = THIS_MODULE, |
| 193 | }; |
| 194 | |
| 195 | static const struct of_device_id rcar_gen2_phy_match_table[] = { |
| 196 | { .compatible = "renesas,usb-phy-r8a7790" }, |
| 197 | { .compatible = "renesas,usb-phy-r8a7791" }, |
| 198 | { } |
| 199 | }; |
| 200 | MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table); |
| 201 | |
| 202 | static struct phy *rcar_gen2_phy_xlate(struct device *dev, |
| 203 | struct of_phandle_args *args) |
| 204 | { |
| 205 | struct rcar_gen2_phy_driver *drv; |
| 206 | struct device_node *np = args->np; |
| 207 | int i; |
| 208 | |
| 209 | if (!of_device_is_available(np)) { |
| 210 | dev_warn(dev, "Requested PHY is disabled\n"); |
| 211 | return ERR_PTR(-ENODEV); |
| 212 | } |
| 213 | |
| 214 | drv = dev_get_drvdata(dev); |
| 215 | if (!drv) |
| 216 | return ERR_PTR(-EINVAL); |
| 217 | |
| 218 | for (i = 0; i < drv->num_channels; i++) { |
| 219 | if (np == drv->channels[i].of_node) |
| 220 | break; |
| 221 | } |
| 222 | |
| 223 | if (i >= drv->num_channels || args->args[0] >= 2) |
| 224 | return ERR_PTR(-ENODEV); |
| 225 | |
| 226 | return drv->channels[i].phys[args->args[0]].phy; |
| 227 | } |
| 228 | |
| 229 | static const u32 select_mask[] = { |
| 230 | [0] = USBHS_UGCTRL2_USB0SEL, |
| 231 | [2] = USBHS_UGCTRL2_USB2SEL, |
| 232 | }; |
| 233 | |
| 234 | static const u32 select_value[][PHYS_PER_CHANNEL] = { |
| 235 | [0] = { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB }, |
| 236 | [2] = { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 }, |
| 237 | }; |
| 238 | |
| 239 | static int rcar_gen2_phy_probe(struct platform_device *pdev) |
| 240 | { |
| 241 | struct device *dev = &pdev->dev; |
| 242 | struct rcar_gen2_phy_driver *drv; |
| 243 | struct phy_provider *provider; |
| 244 | struct device_node *np; |
| 245 | struct resource *res; |
| 246 | void __iomem *base; |
| 247 | struct clk *clk; |
| 248 | int i = 0; |
| 249 | |
| 250 | if (!dev->of_node) { |
| 251 | dev_err(dev, |
| 252 | "This driver is required to be instantiated from device tree\n"); |
| 253 | return -EINVAL; |
| 254 | } |
| 255 | |
| 256 | clk = devm_clk_get(dev, "usbhs"); |
| 257 | if (IS_ERR(clk)) { |
| 258 | dev_err(dev, "Can't get USBHS clock\n"); |
| 259 | return PTR_ERR(clk); |
| 260 | } |
| 261 | |
| 262 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 263 | base = devm_ioremap_resource(dev, res); |
| 264 | if (IS_ERR(base)) |
| 265 | return PTR_ERR(base); |
| 266 | |
| 267 | drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); |
| 268 | if (!drv) |
| 269 | return -ENOMEM; |
| 270 | |
| 271 | spin_lock_init(&drv->lock); |
| 272 | |
| 273 | drv->clk = clk; |
| 274 | drv->base = base; |
| 275 | |
| 276 | drv->num_channels = of_get_child_count(dev->of_node); |
| 277 | drv->channels = devm_kcalloc(dev, drv->num_channels, |
| 278 | sizeof(struct rcar_gen2_channel), |
| 279 | GFP_KERNEL); |
| 280 | if (!drv->channels) |
| 281 | return -ENOMEM; |
| 282 | |
| 283 | for_each_child_of_node(dev->of_node, np) { |
| 284 | struct rcar_gen2_channel *channel = drv->channels + i; |
| 285 | u32 channel_num; |
| 286 | int error, n; |
| 287 | |
| 288 | channel->of_node = np; |
| 289 | channel->drv = drv; |
| 290 | channel->selected_phy = -1; |
| 291 | |
| 292 | error = of_property_read_u32(np, "reg", &channel_num); |
| 293 | if (error || channel_num > 2) { |
| 294 | dev_err(dev, "Invalid \"reg\" property\n"); |
| 295 | return error; |
| 296 | } |
| 297 | channel->select_mask = select_mask[channel_num]; |
| 298 | |
| 299 | for (n = 0; n < PHYS_PER_CHANNEL; n++) { |
| 300 | struct rcar_gen2_phy *phy = &channel->phys[n]; |
| 301 | |
| 302 | phy->channel = channel; |
| 303 | phy->number = n; |
| 304 | phy->select_value = select_value[channel_num][n]; |
| 305 | |
| 306 | phy->phy = devm_phy_create(dev, NULL, |
Heikki Krogerus | dbc9863 | 2014-11-19 17:28:21 +0200 | [diff] [blame] | 307 | &rcar_gen2_phy_ops); |
Sergei Shtylyov | 1233f59 | 2014-07-22 23:27:14 +0400 | [diff] [blame] | 308 | if (IS_ERR(phy->phy)) { |
| 309 | dev_err(dev, "Failed to create PHY\n"); |
| 310 | return PTR_ERR(phy->phy); |
| 311 | } |
| 312 | phy_set_drvdata(phy->phy, phy); |
| 313 | } |
| 314 | |
| 315 | i++; |
| 316 | } |
| 317 | |
| 318 | provider = devm_of_phy_provider_register(dev, rcar_gen2_phy_xlate); |
| 319 | if (IS_ERR(provider)) { |
| 320 | dev_err(dev, "Failed to register PHY provider\n"); |
| 321 | return PTR_ERR(provider); |
| 322 | } |
| 323 | |
| 324 | dev_set_drvdata(dev, drv); |
| 325 | |
| 326 | return 0; |
| 327 | } |
| 328 | |
| 329 | static struct platform_driver rcar_gen2_phy_driver = { |
| 330 | .driver = { |
| 331 | .name = "phy_rcar_gen2", |
| 332 | .of_match_table = rcar_gen2_phy_match_table, |
| 333 | }, |
| 334 | .probe = rcar_gen2_phy_probe, |
| 335 | }; |
| 336 | |
| 337 | module_platform_driver(rcar_gen2_phy_driver); |
| 338 | |
| 339 | MODULE_LICENSE("GPL v2"); |
| 340 | MODULE_DESCRIPTION("Renesas R-Car Gen2 PHY"); |
| 341 | MODULE_AUTHOR("Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>"); |