Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/usb/gadget/s3c2410_udc.c |
| 3 | * |
| 4 | * Samsung S3C24xx series on-chip full speed USB device controllers |
| 5 | * |
| 6 | * Copyright (C) 2004-2007 Herbert Pötzl - Arnaud Patard |
| 7 | * Additional cleanups by Ben Dooks <ben-linux@fluff.org> |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
| 10 | * it under the terms of the GNU General Public License as published by |
| 11 | * the Free Software Foundation; either version 2 of the License, or |
| 12 | * (at your option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License |
| 20 | * along with this program; if not, write to the Free Software |
| 21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 22 | * |
| 23 | */ |
| 24 | |
| 25 | #include <linux/module.h> |
| 26 | #include <linux/kernel.h> |
| 27 | #include <linux/delay.h> |
| 28 | #include <linux/ioport.h> |
| 29 | #include <linux/sched.h> |
| 30 | #include <linux/slab.h> |
| 31 | #include <linux/smp_lock.h> |
| 32 | #include <linux/errno.h> |
| 33 | #include <linux/init.h> |
| 34 | #include <linux/timer.h> |
| 35 | #include <linux/list.h> |
| 36 | #include <linux/interrupt.h> |
| 37 | #include <linux/platform_device.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 38 | #include <linux/clk.h> |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 39 | #include <linux/gpio.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 40 | |
| 41 | #include <linux/debugfs.h> |
| 42 | #include <linux/seq_file.h> |
| 43 | |
| 44 | #include <linux/usb.h> |
David Brownell | 9454a57 | 2007-10-04 18:05:17 -0700 | [diff] [blame] | 45 | #include <linux/usb/gadget.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 46 | |
| 47 | #include <asm/byteorder.h> |
| 48 | #include <asm/io.h> |
| 49 | #include <asm/irq.h> |
| 50 | #include <asm/system.h> |
| 51 | #include <asm/unaligned.h> |
Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 52 | #include <mach/irqs.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 53 | |
Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 54 | #include <mach/hardware.h> |
Ben Dooks | 899d566 | 2007-11-19 22:28:13 +0000 | [diff] [blame] | 55 | |
Ben Dooks | 57bd4b9 | 2008-10-30 10:14:37 +0000 | [diff] [blame] | 56 | #include <plat/regs-udc.h> |
| 57 | #include <plat/udc.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 58 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 59 | |
| 60 | #include "s3c2410_udc.h" |
| 61 | |
| 62 | #define DRIVER_DESC "S3C2410 USB Device Controller Gadget" |
| 63 | #define DRIVER_VERSION "29 Apr 2007" |
| 64 | #define DRIVER_AUTHOR "Herbert Pötzl <herbert@13thfloor.at>, " \ |
| 65 | "Arnaud Patard <arnaud.patard@rtp-net.org>" |
| 66 | |
| 67 | static const char gadget_name[] = "s3c2410_udc"; |
| 68 | static const char driver_desc[] = DRIVER_DESC; |
| 69 | |
| 70 | static struct s3c2410_udc *the_controller; |
| 71 | static struct clk *udc_clock; |
| 72 | static struct clk *usb_bus_clock; |
| 73 | static void __iomem *base_addr; |
| 74 | static u64 rsrc_start; |
| 75 | static u64 rsrc_len; |
| 76 | static struct dentry *s3c2410_udc_debugfs_root; |
| 77 | |
| 78 | static inline u32 udc_read(u32 reg) |
| 79 | { |
| 80 | return readb(base_addr + reg); |
| 81 | } |
| 82 | |
| 83 | static inline void udc_write(u32 value, u32 reg) |
| 84 | { |
| 85 | writeb(value, base_addr + reg); |
| 86 | } |
| 87 | |
| 88 | static inline void udc_writeb(void __iomem *base, u32 value, u32 reg) |
| 89 | { |
| 90 | writeb(value, base + reg); |
| 91 | } |
| 92 | |
| 93 | static struct s3c2410_udc_mach_info *udc_info; |
| 94 | |
| 95 | /*************************** DEBUG FUNCTION ***************************/ |
| 96 | #define DEBUG_NORMAL 1 |
| 97 | #define DEBUG_VERBOSE 2 |
| 98 | |
| 99 | #ifdef CONFIG_USB_S3C2410_DEBUG |
| 100 | #define USB_S3C2410_DEBUG_LEVEL 0 |
| 101 | |
| 102 | static uint32_t s3c2410_ticks = 0; |
| 103 | |
| 104 | static int dprintk(int level, const char *fmt, ...) |
| 105 | { |
| 106 | static char printk_buf[1024]; |
| 107 | static long prevticks; |
| 108 | static int invocation; |
| 109 | va_list args; |
| 110 | int len; |
| 111 | |
| 112 | if (level > USB_S3C2410_DEBUG_LEVEL) |
| 113 | return 0; |
| 114 | |
| 115 | if (s3c2410_ticks != prevticks) { |
| 116 | prevticks = s3c2410_ticks; |
| 117 | invocation = 0; |
| 118 | } |
| 119 | |
| 120 | len = scnprintf(printk_buf, |
| 121 | sizeof(printk_buf), "%1lu.%02d USB: ", |
| 122 | prevticks, invocation++); |
| 123 | |
| 124 | va_start(args, fmt); |
| 125 | len = vscnprintf(printk_buf+len, |
| 126 | sizeof(printk_buf)-len, fmt, args); |
| 127 | va_end(args); |
| 128 | |
| 129 | return printk(KERN_DEBUG "%s", printk_buf); |
| 130 | } |
| 131 | #else |
| 132 | static int dprintk(int level, const char *fmt, ...) |
| 133 | { |
| 134 | return 0; |
| 135 | } |
| 136 | #endif |
| 137 | static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p) |
| 138 | { |
| 139 | u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg; |
| 140 | u32 ep_int_en_reg, usb_int_en_reg, ep0_csr; |
| 141 | u32 ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2; |
| 142 | u32 ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2; |
| 143 | |
| 144 | addr_reg = udc_read(S3C2410_UDC_FUNC_ADDR_REG); |
| 145 | pwr_reg = udc_read(S3C2410_UDC_PWR_REG); |
| 146 | ep_int_reg = udc_read(S3C2410_UDC_EP_INT_REG); |
| 147 | usb_int_reg = udc_read(S3C2410_UDC_USB_INT_REG); |
| 148 | ep_int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); |
| 149 | usb_int_en_reg = udc_read(S3C2410_UDC_USB_INT_EN_REG); |
| 150 | udc_write(0, S3C2410_UDC_INDEX_REG); |
| 151 | ep0_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 152 | udc_write(1, S3C2410_UDC_INDEX_REG); |
| 153 | ep1_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 154 | ep1_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| 155 | ep1_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 156 | ep1_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| 157 | udc_write(2, S3C2410_UDC_INDEX_REG); |
| 158 | ep2_i_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 159 | ep2_i_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| 160 | ep2_o_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 161 | ep2_o_csr2 = udc_read(S3C2410_UDC_IN_CSR2_REG); |
| 162 | |
| 163 | seq_printf(m, "FUNC_ADDR_REG : 0x%04X\n" |
| 164 | "PWR_REG : 0x%04X\n" |
| 165 | "EP_INT_REG : 0x%04X\n" |
| 166 | "USB_INT_REG : 0x%04X\n" |
| 167 | "EP_INT_EN_REG : 0x%04X\n" |
| 168 | "USB_INT_EN_REG : 0x%04X\n" |
| 169 | "EP0_CSR : 0x%04X\n" |
| 170 | "EP1_I_CSR1 : 0x%04X\n" |
| 171 | "EP1_I_CSR2 : 0x%04X\n" |
| 172 | "EP1_O_CSR1 : 0x%04X\n" |
| 173 | "EP1_O_CSR2 : 0x%04X\n" |
| 174 | "EP2_I_CSR1 : 0x%04X\n" |
| 175 | "EP2_I_CSR2 : 0x%04X\n" |
| 176 | "EP2_O_CSR1 : 0x%04X\n" |
| 177 | "EP2_O_CSR2 : 0x%04X\n", |
| 178 | addr_reg,pwr_reg,ep_int_reg,usb_int_reg, |
| 179 | ep_int_en_reg, usb_int_en_reg, ep0_csr, |
| 180 | ep1_i_csr1,ep1_i_csr2,ep1_o_csr1,ep1_o_csr2, |
| 181 | ep2_i_csr1,ep2_i_csr2,ep2_o_csr1,ep2_o_csr2 |
| 182 | ); |
| 183 | |
| 184 | return 0; |
| 185 | } |
| 186 | |
| 187 | static int s3c2410_udc_debugfs_fops_open(struct inode *inode, |
| 188 | struct file *file) |
| 189 | { |
| 190 | return single_open(file, s3c2410_udc_debugfs_seq_show, NULL); |
| 191 | } |
| 192 | |
| 193 | static const struct file_operations s3c2410_udc_debugfs_fops = { |
| 194 | .open = s3c2410_udc_debugfs_fops_open, |
| 195 | .read = seq_read, |
| 196 | .llseek = seq_lseek, |
| 197 | .release = single_release, |
| 198 | .owner = THIS_MODULE, |
| 199 | }; |
| 200 | |
| 201 | /* io macros */ |
| 202 | |
| 203 | static inline void s3c2410_udc_clear_ep0_opr(void __iomem *base) |
| 204 | { |
| 205 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 206 | udc_writeb(base, S3C2410_UDC_EP0_CSR_SOPKTRDY, |
| 207 | S3C2410_UDC_EP0_CSR_REG); |
| 208 | } |
| 209 | |
| 210 | static inline void s3c2410_udc_clear_ep0_sst(void __iomem *base) |
| 211 | { |
| 212 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 213 | writeb(0x00, base + S3C2410_UDC_EP0_CSR_REG); |
| 214 | } |
| 215 | |
| 216 | static inline void s3c2410_udc_clear_ep0_se(void __iomem *base) |
| 217 | { |
| 218 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 219 | udc_writeb(base, S3C2410_UDC_EP0_CSR_SSE, S3C2410_UDC_EP0_CSR_REG); |
| 220 | } |
| 221 | |
| 222 | static inline void s3c2410_udc_set_ep0_ipr(void __iomem *base) |
| 223 | { |
| 224 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 225 | udc_writeb(base, S3C2410_UDC_EP0_CSR_IPKRDY, S3C2410_UDC_EP0_CSR_REG); |
| 226 | } |
| 227 | |
| 228 | static inline void s3c2410_udc_set_ep0_de(void __iomem *base) |
| 229 | { |
| 230 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 231 | udc_writeb(base, S3C2410_UDC_EP0_CSR_DE, S3C2410_UDC_EP0_CSR_REG); |
| 232 | } |
| 233 | |
| 234 | inline void s3c2410_udc_set_ep0_ss(void __iomem *b) |
| 235 | { |
| 236 | udc_writeb(b, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 237 | udc_writeb(b, S3C2410_UDC_EP0_CSR_SENDSTL, S3C2410_UDC_EP0_CSR_REG); |
| 238 | } |
| 239 | |
| 240 | static inline void s3c2410_udc_set_ep0_de_out(void __iomem *base) |
| 241 | { |
| 242 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 243 | |
| 244 | udc_writeb(base,(S3C2410_UDC_EP0_CSR_SOPKTRDY |
| 245 | | S3C2410_UDC_EP0_CSR_DE), |
| 246 | S3C2410_UDC_EP0_CSR_REG); |
| 247 | } |
| 248 | |
| 249 | static inline void s3c2410_udc_set_ep0_sse_out(void __iomem *base) |
| 250 | { |
| 251 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 252 | udc_writeb(base, (S3C2410_UDC_EP0_CSR_SOPKTRDY |
| 253 | | S3C2410_UDC_EP0_CSR_SSE), |
| 254 | S3C2410_UDC_EP0_CSR_REG); |
| 255 | } |
| 256 | |
| 257 | static inline void s3c2410_udc_set_ep0_de_in(void __iomem *base) |
| 258 | { |
| 259 | udc_writeb(base, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 260 | udc_writeb(base, (S3C2410_UDC_EP0_CSR_IPKRDY |
| 261 | | S3C2410_UDC_EP0_CSR_DE), |
| 262 | S3C2410_UDC_EP0_CSR_REG); |
| 263 | } |
| 264 | |
| 265 | /*------------------------- I/O ----------------------------------*/ |
| 266 | |
| 267 | /* |
| 268 | * s3c2410_udc_done |
| 269 | */ |
| 270 | static void s3c2410_udc_done(struct s3c2410_ep *ep, |
| 271 | struct s3c2410_request *req, int status) |
| 272 | { |
| 273 | unsigned halted = ep->halted; |
| 274 | |
| 275 | list_del_init(&req->queue); |
| 276 | |
| 277 | if (likely (req->req.status == -EINPROGRESS)) |
| 278 | req->req.status = status; |
| 279 | else |
| 280 | status = req->req.status; |
| 281 | |
| 282 | ep->halted = 1; |
| 283 | req->req.complete(&ep->ep, &req->req); |
| 284 | ep->halted = halted; |
| 285 | } |
| 286 | |
| 287 | static void s3c2410_udc_nuke(struct s3c2410_udc *udc, |
| 288 | struct s3c2410_ep *ep, int status) |
| 289 | { |
| 290 | /* Sanity check */ |
| 291 | if (&ep->queue == NULL) |
| 292 | return; |
| 293 | |
| 294 | while (!list_empty (&ep->queue)) { |
| 295 | struct s3c2410_request *req; |
| 296 | req = list_entry (ep->queue.next, struct s3c2410_request, |
| 297 | queue); |
| 298 | s3c2410_udc_done(ep, req, status); |
| 299 | } |
| 300 | } |
| 301 | |
| 302 | static inline void s3c2410_udc_clear_ep_state(struct s3c2410_udc *dev) |
| 303 | { |
| 304 | unsigned i; |
| 305 | |
| 306 | /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint |
| 307 | * fifos, and pending transactions mustn't be continued in any case. |
| 308 | */ |
| 309 | |
| 310 | for (i = 1; i < S3C2410_ENDPOINTS; i++) |
| 311 | s3c2410_udc_nuke(dev, &dev->ep[i], -ECONNABORTED); |
| 312 | } |
| 313 | |
| 314 | static inline int s3c2410_udc_fifo_count_out(void) |
| 315 | { |
| 316 | int tmp; |
| 317 | |
| 318 | tmp = udc_read(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8; |
| 319 | tmp |= udc_read(S3C2410_UDC_OUT_FIFO_CNT1_REG); |
| 320 | return tmp; |
| 321 | } |
| 322 | |
| 323 | /* |
| 324 | * s3c2410_udc_write_packet |
| 325 | */ |
| 326 | static inline int s3c2410_udc_write_packet(int fifo, |
| 327 | struct s3c2410_request *req, |
| 328 | unsigned max) |
| 329 | { |
| 330 | unsigned len = min(req->req.length - req->req.actual, max); |
| 331 | u8 *buf = req->req.buf + req->req.actual; |
| 332 | |
| 333 | prefetch(buf); |
| 334 | |
| 335 | dprintk(DEBUG_VERBOSE, "%s %d %d %d %d\n", __func__, |
| 336 | req->req.actual, req->req.length, len, req->req.actual + len); |
| 337 | |
| 338 | req->req.actual += len; |
| 339 | |
| 340 | udelay(5); |
| 341 | writesb(base_addr + fifo, buf, len); |
| 342 | return len; |
| 343 | } |
| 344 | |
| 345 | /* |
| 346 | * s3c2410_udc_write_fifo |
| 347 | * |
| 348 | * return: 0 = still running, 1 = completed, negative = errno |
| 349 | */ |
| 350 | static int s3c2410_udc_write_fifo(struct s3c2410_ep *ep, |
| 351 | struct s3c2410_request *req) |
| 352 | { |
| 353 | unsigned count; |
| 354 | int is_last; |
| 355 | u32 idx; |
| 356 | int fifo_reg; |
| 357 | u32 ep_csr; |
| 358 | |
| 359 | idx = ep->bEndpointAddress & 0x7F; |
| 360 | switch (idx) { |
| 361 | default: |
| 362 | idx = 0; |
| 363 | case 0: |
| 364 | fifo_reg = S3C2410_UDC_EP0_FIFO_REG; |
| 365 | break; |
| 366 | case 1: |
| 367 | fifo_reg = S3C2410_UDC_EP1_FIFO_REG; |
| 368 | break; |
| 369 | case 2: |
| 370 | fifo_reg = S3C2410_UDC_EP2_FIFO_REG; |
| 371 | break; |
| 372 | case 3: |
| 373 | fifo_reg = S3C2410_UDC_EP3_FIFO_REG; |
| 374 | break; |
| 375 | case 4: |
| 376 | fifo_reg = S3C2410_UDC_EP4_FIFO_REG; |
| 377 | break; |
| 378 | } |
| 379 | |
| 380 | count = s3c2410_udc_write_packet(fifo_reg, req, ep->ep.maxpacket); |
| 381 | |
| 382 | /* last packet is often short (sometimes a zlp) */ |
| 383 | if (count != ep->ep.maxpacket) |
| 384 | is_last = 1; |
| 385 | else if (req->req.length != req->req.actual || req->req.zero) |
| 386 | is_last = 0; |
| 387 | else |
| 388 | is_last = 2; |
| 389 | |
| 390 | /* Only ep0 debug messages are interesting */ |
| 391 | if (idx == 0) |
| 392 | dprintk(DEBUG_NORMAL, |
| 393 | "Written ep%d %d.%d of %d b [last %d,z %d]\n", |
| 394 | idx, count, req->req.actual, req->req.length, |
| 395 | is_last, req->req.zero); |
| 396 | |
| 397 | if (is_last) { |
| 398 | /* The order is important. It prevents sending 2 packets |
| 399 | * at the same time */ |
| 400 | |
| 401 | if (idx == 0) { |
| 402 | /* Reset signal => no need to say 'data sent' */ |
| 403 | if (! (udc_read(S3C2410_UDC_USB_INT_REG) |
| 404 | & S3C2410_UDC_USBINT_RESET)) |
| 405 | s3c2410_udc_set_ep0_de_in(base_addr); |
| 406 | ep->dev->ep0state=EP0_IDLE; |
| 407 | } else { |
| 408 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 409 | ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 410 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 411 | udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY, |
| 412 | S3C2410_UDC_IN_CSR1_REG); |
| 413 | } |
| 414 | |
| 415 | s3c2410_udc_done(ep, req, 0); |
| 416 | is_last = 1; |
| 417 | } else { |
| 418 | if (idx == 0) { |
| 419 | /* Reset signal => no need to say 'data sent' */ |
| 420 | if (! (udc_read(S3C2410_UDC_USB_INT_REG) |
| 421 | & S3C2410_UDC_USBINT_RESET)) |
| 422 | s3c2410_udc_set_ep0_ipr(base_addr); |
| 423 | } else { |
| 424 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 425 | ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 426 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 427 | udc_write(ep_csr | S3C2410_UDC_ICSR1_PKTRDY, |
| 428 | S3C2410_UDC_IN_CSR1_REG); |
| 429 | } |
| 430 | } |
| 431 | |
| 432 | return is_last; |
| 433 | } |
| 434 | |
| 435 | static inline int s3c2410_udc_read_packet(int fifo, u8 *buf, |
| 436 | struct s3c2410_request *req, unsigned avail) |
| 437 | { |
| 438 | unsigned len; |
| 439 | |
| 440 | len = min(req->req.length - req->req.actual, avail); |
| 441 | req->req.actual += len; |
| 442 | |
| 443 | readsb(fifo + base_addr, buf, len); |
| 444 | return len; |
| 445 | } |
| 446 | |
| 447 | /* |
| 448 | * return: 0 = still running, 1 = queue empty, negative = errno |
| 449 | */ |
| 450 | static int s3c2410_udc_read_fifo(struct s3c2410_ep *ep, |
| 451 | struct s3c2410_request *req) |
| 452 | { |
| 453 | u8 *buf; |
| 454 | u32 ep_csr; |
| 455 | unsigned bufferspace; |
| 456 | int is_last=1; |
| 457 | unsigned avail; |
| 458 | int fifo_count = 0; |
| 459 | u32 idx; |
| 460 | int fifo_reg; |
| 461 | |
| 462 | idx = ep->bEndpointAddress & 0x7F; |
| 463 | |
| 464 | switch (idx) { |
| 465 | default: |
| 466 | idx = 0; |
| 467 | case 0: |
| 468 | fifo_reg = S3C2410_UDC_EP0_FIFO_REG; |
| 469 | break; |
| 470 | case 1: |
| 471 | fifo_reg = S3C2410_UDC_EP1_FIFO_REG; |
| 472 | break; |
| 473 | case 2: |
| 474 | fifo_reg = S3C2410_UDC_EP2_FIFO_REG; |
| 475 | break; |
| 476 | case 3: |
| 477 | fifo_reg = S3C2410_UDC_EP3_FIFO_REG; |
| 478 | break; |
| 479 | case 4: |
| 480 | fifo_reg = S3C2410_UDC_EP4_FIFO_REG; |
| 481 | break; |
| 482 | } |
| 483 | |
| 484 | if (!req->req.length) |
| 485 | return 1; |
| 486 | |
| 487 | buf = req->req.buf + req->req.actual; |
| 488 | bufferspace = req->req.length - req->req.actual; |
| 489 | if (!bufferspace) { |
| 490 | dprintk(DEBUG_NORMAL, "%s: buffer full!\n", __func__); |
| 491 | return -1; |
| 492 | } |
| 493 | |
| 494 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 495 | |
| 496 | fifo_count = s3c2410_udc_fifo_count_out(); |
| 497 | dprintk(DEBUG_NORMAL, "%s fifo count : %d\n", __func__, fifo_count); |
| 498 | |
| 499 | if (fifo_count > ep->ep.maxpacket) |
| 500 | avail = ep->ep.maxpacket; |
| 501 | else |
| 502 | avail = fifo_count; |
| 503 | |
| 504 | fifo_count = s3c2410_udc_read_packet(fifo_reg, buf, req, avail); |
| 505 | |
| 506 | /* checking this with ep0 is not accurate as we already |
| 507 | * read a control request |
| 508 | **/ |
| 509 | if (idx != 0 && fifo_count < ep->ep.maxpacket) { |
| 510 | is_last = 1; |
| 511 | /* overflowed this request? flush extra data */ |
| 512 | if (fifo_count != avail) |
| 513 | req->req.status = -EOVERFLOW; |
| 514 | } else { |
| 515 | is_last = (req->req.length <= req->req.actual) ? 1 : 0; |
| 516 | } |
| 517 | |
| 518 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 519 | fifo_count = s3c2410_udc_fifo_count_out(); |
| 520 | |
| 521 | /* Only ep0 debug messages are interesting */ |
| 522 | if (idx == 0) |
| 523 | dprintk(DEBUG_VERBOSE, "%s fifo count : %d [last %d]\n", |
| 524 | __func__, fifo_count,is_last); |
| 525 | |
| 526 | if (is_last) { |
| 527 | if (idx == 0) { |
| 528 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 529 | ep->dev->ep0state = EP0_IDLE; |
| 530 | } else { |
| 531 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 532 | ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| 533 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 534 | udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY, |
| 535 | S3C2410_UDC_OUT_CSR1_REG); |
| 536 | } |
| 537 | |
| 538 | s3c2410_udc_done(ep, req, 0); |
| 539 | } else { |
| 540 | if (idx == 0) { |
| 541 | s3c2410_udc_clear_ep0_opr(base_addr); |
| 542 | } else { |
| 543 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 544 | ep_csr = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| 545 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 546 | udc_write(ep_csr & ~S3C2410_UDC_OCSR1_PKTRDY, |
| 547 | S3C2410_UDC_OUT_CSR1_REG); |
| 548 | } |
| 549 | } |
| 550 | |
| 551 | return is_last; |
| 552 | } |
| 553 | |
| 554 | static int s3c2410_udc_read_fifo_crq(struct usb_ctrlrequest *crq) |
| 555 | { |
| 556 | unsigned char *outbuf = (unsigned char*)crq; |
| 557 | int bytes_read = 0; |
| 558 | |
| 559 | udc_write(0, S3C2410_UDC_INDEX_REG); |
| 560 | |
| 561 | bytes_read = s3c2410_udc_fifo_count_out(); |
| 562 | |
| 563 | dprintk(DEBUG_NORMAL, "%s: fifo_count=%d\n", __func__, bytes_read); |
| 564 | |
| 565 | if (bytes_read > sizeof(struct usb_ctrlrequest)) |
| 566 | bytes_read = sizeof(struct usb_ctrlrequest); |
| 567 | |
| 568 | readsb(S3C2410_UDC_EP0_FIFO_REG + base_addr, outbuf, bytes_read); |
| 569 | |
| 570 | dprintk(DEBUG_VERBOSE, "%s: len=%d %02x:%02x {%x,%x,%x}\n", __func__, |
| 571 | bytes_read, crq->bRequest, crq->bRequestType, |
| 572 | crq->wValue, crq->wIndex, crq->wLength); |
| 573 | |
| 574 | return bytes_read; |
| 575 | } |
| 576 | |
| 577 | static int s3c2410_udc_get_status(struct s3c2410_udc *dev, |
| 578 | struct usb_ctrlrequest *crq) |
| 579 | { |
| 580 | u16 status = 0; |
| 581 | u8 ep_num = crq->wIndex & 0x7F; |
| 582 | u8 is_in = crq->wIndex & USB_DIR_IN; |
| 583 | |
| 584 | switch (crq->bRequestType & USB_RECIP_MASK) { |
| 585 | case USB_RECIP_INTERFACE: |
| 586 | break; |
| 587 | |
| 588 | case USB_RECIP_DEVICE: |
| 589 | status = dev->devstatus; |
| 590 | break; |
| 591 | |
| 592 | case USB_RECIP_ENDPOINT: |
| 593 | if (ep_num > 4 || crq->wLength > 2) |
| 594 | return 1; |
| 595 | |
| 596 | if (ep_num == 0) { |
| 597 | udc_write(0, S3C2410_UDC_INDEX_REG); |
| 598 | status = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 599 | status = status & S3C2410_UDC_EP0_CSR_SENDSTL; |
| 600 | } else { |
| 601 | udc_write(ep_num, S3C2410_UDC_INDEX_REG); |
| 602 | if (is_in) { |
| 603 | status = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 604 | status = status & S3C2410_UDC_ICSR1_SENDSTL; |
| 605 | } else { |
| 606 | status = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| 607 | status = status & S3C2410_UDC_OCSR1_SENDSTL; |
| 608 | } |
| 609 | } |
| 610 | |
| 611 | status = status ? 1 : 0; |
| 612 | break; |
| 613 | |
| 614 | default: |
| 615 | return 1; |
| 616 | } |
| 617 | |
| 618 | /* Seems to be needed to get it working. ouch :( */ |
| 619 | udelay(5); |
| 620 | udc_write(status & 0xFF, S3C2410_UDC_EP0_FIFO_REG); |
| 621 | udc_write(status >> 8, S3C2410_UDC_EP0_FIFO_REG); |
| 622 | s3c2410_udc_set_ep0_de_in(base_addr); |
| 623 | |
| 624 | return 0; |
| 625 | } |
| 626 | /*------------------------- usb state machine -------------------------------*/ |
| 627 | static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value); |
| 628 | |
| 629 | static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, |
| 630 | struct s3c2410_ep *ep, |
| 631 | struct usb_ctrlrequest *crq, |
| 632 | u32 ep0csr) |
| 633 | { |
| 634 | int len, ret, tmp; |
| 635 | |
| 636 | /* start control request? */ |
| 637 | if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY)) |
| 638 | return; |
| 639 | |
| 640 | s3c2410_udc_nuke(dev, ep, -EPROTO); |
| 641 | |
| 642 | len = s3c2410_udc_read_fifo_crq(crq); |
| 643 | if (len != sizeof(*crq)) { |
| 644 | dprintk(DEBUG_NORMAL, "setup begin: fifo READ ERROR" |
| 645 | " wanted %d bytes got %d. Stalling out...\n", |
| 646 | sizeof(*crq), len); |
| 647 | s3c2410_udc_set_ep0_ss(base_addr); |
| 648 | return; |
| 649 | } |
| 650 | |
| 651 | dprintk(DEBUG_NORMAL, "bRequest = %d bRequestType %d wLength = %d\n", |
| 652 | crq->bRequest, crq->bRequestType, crq->wLength); |
| 653 | |
| 654 | /* cope with automagic for some standard requests. */ |
| 655 | dev->req_std = (crq->bRequestType & USB_TYPE_MASK) |
| 656 | == USB_TYPE_STANDARD; |
| 657 | dev->req_config = 0; |
| 658 | dev->req_pending = 1; |
| 659 | |
| 660 | switch (crq->bRequest) { |
| 661 | case USB_REQ_SET_CONFIGURATION: |
| 662 | dprintk(DEBUG_NORMAL, "USB_REQ_SET_CONFIGURATION ... \n"); |
| 663 | |
| 664 | if (crq->bRequestType == USB_RECIP_DEVICE) { |
| 665 | dev->req_config = 1; |
| 666 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 667 | } |
| 668 | break; |
| 669 | |
| 670 | case USB_REQ_SET_INTERFACE: |
| 671 | dprintk(DEBUG_NORMAL, "USB_REQ_SET_INTERFACE ... \n"); |
| 672 | |
| 673 | if (crq->bRequestType == USB_RECIP_INTERFACE) { |
| 674 | dev->req_config = 1; |
| 675 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 676 | } |
| 677 | break; |
| 678 | |
| 679 | case USB_REQ_SET_ADDRESS: |
| 680 | dprintk(DEBUG_NORMAL, "USB_REQ_SET_ADDRESS ... \n"); |
| 681 | |
| 682 | if (crq->bRequestType == USB_RECIP_DEVICE) { |
| 683 | tmp = crq->wValue & 0x7F; |
| 684 | dev->address = tmp; |
| 685 | udc_write((tmp | S3C2410_UDC_FUNCADDR_UPDATE), |
| 686 | S3C2410_UDC_FUNC_ADDR_REG); |
| 687 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 688 | return; |
| 689 | } |
| 690 | break; |
| 691 | |
| 692 | case USB_REQ_GET_STATUS: |
| 693 | dprintk(DEBUG_NORMAL, "USB_REQ_GET_STATUS ... \n"); |
| 694 | s3c2410_udc_clear_ep0_opr(base_addr); |
| 695 | |
| 696 | if (dev->req_std) { |
| 697 | if (!s3c2410_udc_get_status(dev, crq)) { |
| 698 | return; |
| 699 | } |
| 700 | } |
| 701 | break; |
| 702 | |
| 703 | case USB_REQ_CLEAR_FEATURE: |
| 704 | s3c2410_udc_clear_ep0_opr(base_addr); |
| 705 | |
| 706 | if (crq->bRequestType != USB_RECIP_ENDPOINT) |
| 707 | break; |
| 708 | |
| 709 | if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0) |
| 710 | break; |
| 711 | |
| 712 | s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 0); |
| 713 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 714 | return; |
| 715 | |
| 716 | case USB_REQ_SET_FEATURE: |
| 717 | s3c2410_udc_clear_ep0_opr(base_addr); |
| 718 | |
| 719 | if (crq->bRequestType != USB_RECIP_ENDPOINT) |
| 720 | break; |
| 721 | |
| 722 | if (crq->wValue != USB_ENDPOINT_HALT || crq->wLength != 0) |
| 723 | break; |
| 724 | |
| 725 | s3c2410_udc_set_halt(&dev->ep[crq->wIndex & 0x7f].ep, 1); |
| 726 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 727 | return; |
| 728 | |
| 729 | default: |
| 730 | s3c2410_udc_clear_ep0_opr(base_addr); |
| 731 | break; |
| 732 | } |
| 733 | |
| 734 | if (crq->bRequestType & USB_DIR_IN) |
| 735 | dev->ep0state = EP0_IN_DATA_PHASE; |
| 736 | else |
| 737 | dev->ep0state = EP0_OUT_DATA_PHASE; |
| 738 | |
| 739 | ret = dev->driver->setup(&dev->gadget, crq); |
| 740 | if (ret < 0) { |
| 741 | if (dev->req_config) { |
| 742 | dprintk(DEBUG_NORMAL, "config change %02x fail %d?\n", |
| 743 | crq->bRequest, ret); |
| 744 | return; |
| 745 | } |
| 746 | |
| 747 | if (ret == -EOPNOTSUPP) |
| 748 | dprintk(DEBUG_NORMAL, "Operation not supported\n"); |
| 749 | else |
| 750 | dprintk(DEBUG_NORMAL, |
| 751 | "dev->driver->setup failed. (%d)\n", ret); |
| 752 | |
| 753 | udelay(5); |
| 754 | s3c2410_udc_set_ep0_ss(base_addr); |
| 755 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 756 | dev->ep0state = EP0_IDLE; |
| 757 | /* deferred i/o == no response yet */ |
| 758 | } else if (dev->req_pending) { |
| 759 | dprintk(DEBUG_VERBOSE, "dev->req_pending... what now?\n"); |
| 760 | dev->req_pending=0; |
| 761 | } |
| 762 | |
| 763 | dprintk(DEBUG_VERBOSE, "ep0state %s\n", ep0states[dev->ep0state]); |
| 764 | } |
| 765 | |
| 766 | static void s3c2410_udc_handle_ep0(struct s3c2410_udc *dev) |
| 767 | { |
| 768 | u32 ep0csr; |
| 769 | struct s3c2410_ep *ep = &dev->ep[0]; |
| 770 | struct s3c2410_request *req; |
| 771 | struct usb_ctrlrequest crq; |
| 772 | |
| 773 | if (list_empty(&ep->queue)) |
| 774 | req = NULL; |
| 775 | else |
| 776 | req = list_entry(ep->queue.next, struct s3c2410_request, queue); |
| 777 | |
| 778 | /* We make the assumption that S3C2410_UDC_IN_CSR1_REG equal to |
| 779 | * S3C2410_UDC_EP0_CSR_REG when index is zero */ |
| 780 | |
| 781 | udc_write(0, S3C2410_UDC_INDEX_REG); |
| 782 | ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 783 | |
| 784 | dprintk(DEBUG_NORMAL, "ep0csr %x ep0state %s\n", |
| 785 | ep0csr, ep0states[dev->ep0state]); |
| 786 | |
| 787 | /* clear stall status */ |
| 788 | if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) { |
| 789 | s3c2410_udc_nuke(dev, ep, -EPIPE); |
| 790 | dprintk(DEBUG_NORMAL, "... clear SENT_STALL ...\n"); |
| 791 | s3c2410_udc_clear_ep0_sst(base_addr); |
| 792 | dev->ep0state = EP0_IDLE; |
| 793 | return; |
| 794 | } |
| 795 | |
| 796 | /* clear setup end */ |
| 797 | if (ep0csr & S3C2410_UDC_EP0_CSR_SE) { |
| 798 | dprintk(DEBUG_NORMAL, "... serviced SETUP_END ...\n"); |
| 799 | s3c2410_udc_nuke(dev, ep, 0); |
| 800 | s3c2410_udc_clear_ep0_se(base_addr); |
| 801 | dev->ep0state = EP0_IDLE; |
| 802 | } |
| 803 | |
| 804 | switch (dev->ep0state) { |
| 805 | case EP0_IDLE: |
| 806 | s3c2410_udc_handle_ep0_idle(dev, ep, &crq, ep0csr); |
| 807 | break; |
| 808 | |
| 809 | case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ |
| 810 | dprintk(DEBUG_NORMAL, "EP0_IN_DATA_PHASE ... what now?\n"); |
| 811 | if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY) && req) { |
| 812 | s3c2410_udc_write_fifo(ep, req); |
| 813 | } |
| 814 | break; |
| 815 | |
| 816 | case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ |
| 817 | dprintk(DEBUG_NORMAL, "EP0_OUT_DATA_PHASE ... what now?\n"); |
| 818 | if ((ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) && req ) { |
| 819 | s3c2410_udc_read_fifo(ep,req); |
| 820 | } |
| 821 | break; |
| 822 | |
| 823 | case EP0_END_XFER: |
| 824 | dprintk(DEBUG_NORMAL, "EP0_END_XFER ... what now?\n"); |
| 825 | dev->ep0state = EP0_IDLE; |
| 826 | break; |
| 827 | |
| 828 | case EP0_STALL: |
| 829 | dprintk(DEBUG_NORMAL, "EP0_STALL ... what now?\n"); |
| 830 | dev->ep0state = EP0_IDLE; |
| 831 | break; |
| 832 | } |
| 833 | } |
| 834 | |
| 835 | /* |
| 836 | * handle_ep - Manage I/O endpoints |
| 837 | */ |
| 838 | |
| 839 | static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) |
| 840 | { |
| 841 | struct s3c2410_request *req; |
| 842 | int is_in = ep->bEndpointAddress & USB_DIR_IN; |
| 843 | u32 ep_csr1; |
| 844 | u32 idx; |
| 845 | |
| 846 | if (likely (!list_empty(&ep->queue))) |
| 847 | req = list_entry(ep->queue.next, |
| 848 | struct s3c2410_request, queue); |
| 849 | else |
| 850 | req = NULL; |
| 851 | |
| 852 | idx = ep->bEndpointAddress & 0x7F; |
| 853 | |
| 854 | if (is_in) { |
| 855 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 856 | ep_csr1 = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 857 | dprintk(DEBUG_VERBOSE, "ep%01d write csr:%02x %d\n", |
| 858 | idx, ep_csr1, req ? 1 : 0); |
| 859 | |
| 860 | if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) { |
| 861 | dprintk(DEBUG_VERBOSE, "st\n"); |
| 862 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 863 | udc_write(ep_csr1 & ~S3C2410_UDC_ICSR1_SENTSTL, |
| 864 | S3C2410_UDC_IN_CSR1_REG); |
| 865 | return; |
| 866 | } |
| 867 | |
| 868 | if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && req) { |
| 869 | s3c2410_udc_write_fifo(ep,req); |
| 870 | } |
| 871 | } else { |
| 872 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 873 | ep_csr1 = udc_read(S3C2410_UDC_OUT_CSR1_REG); |
| 874 | dprintk(DEBUG_VERBOSE, "ep%01d rd csr:%02x\n", idx, ep_csr1); |
| 875 | |
| 876 | if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) { |
| 877 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 878 | udc_write(ep_csr1 & ~S3C2410_UDC_OCSR1_SENTSTL, |
| 879 | S3C2410_UDC_OUT_CSR1_REG); |
| 880 | return; |
| 881 | } |
| 882 | |
| 883 | if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) { |
| 884 | s3c2410_udc_read_fifo(ep,req); |
| 885 | } |
| 886 | } |
| 887 | } |
| 888 | |
Russell King | a09e64f | 2008-08-05 16:14:15 +0100 | [diff] [blame] | 889 | #include <mach/regs-irq.h> |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 890 | |
| 891 | /* |
| 892 | * s3c2410_udc_irq - interrupt handler |
| 893 | */ |
Jeff Garzik | d8d4223 | 2007-11-21 15:13:10 -0800 | [diff] [blame] | 894 | static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev) |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 895 | { |
| 896 | struct s3c2410_udc *dev = _dev; |
| 897 | int usb_status; |
| 898 | int usbd_status; |
| 899 | int pwr_reg; |
| 900 | int ep0csr; |
| 901 | int i; |
| 902 | u32 idx; |
| 903 | unsigned long flags; |
| 904 | |
| 905 | spin_lock_irqsave(&dev->lock, flags); |
| 906 | |
| 907 | /* Driver connected ? */ |
| 908 | if (!dev->driver) { |
| 909 | /* Clear interrupts */ |
| 910 | udc_write(udc_read(S3C2410_UDC_USB_INT_REG), |
| 911 | S3C2410_UDC_USB_INT_REG); |
| 912 | udc_write(udc_read(S3C2410_UDC_EP_INT_REG), |
| 913 | S3C2410_UDC_EP_INT_REG); |
| 914 | } |
| 915 | |
| 916 | /* Save index */ |
| 917 | idx = udc_read(S3C2410_UDC_INDEX_REG); |
| 918 | |
| 919 | /* Read status registers */ |
| 920 | usb_status = udc_read(S3C2410_UDC_USB_INT_REG); |
| 921 | usbd_status = udc_read(S3C2410_UDC_EP_INT_REG); |
| 922 | pwr_reg = udc_read(S3C2410_UDC_PWR_REG); |
| 923 | |
| 924 | udc_writeb(base_addr, S3C2410_UDC_INDEX_EP0, S3C2410_UDC_INDEX_REG); |
| 925 | ep0csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 926 | |
| 927 | dprintk(DEBUG_NORMAL, "usbs=%02x, usbds=%02x, pwr=%02x ep0csr=%02x\n", |
| 928 | usb_status, usbd_status, pwr_reg, ep0csr); |
| 929 | |
| 930 | /* |
| 931 | * Now, handle interrupts. There's two types : |
| 932 | * - Reset, Resume, Suspend coming -> usb_int_reg |
| 933 | * - EP -> ep_int_reg |
| 934 | */ |
| 935 | |
| 936 | /* RESET */ |
| 937 | if (usb_status & S3C2410_UDC_USBINT_RESET) { |
| 938 | /* two kind of reset : |
| 939 | * - reset start -> pwr reg = 8 |
| 940 | * - reset end -> pwr reg = 0 |
| 941 | **/ |
| 942 | dprintk(DEBUG_NORMAL, "USB reset csr %x pwr %x\n", |
| 943 | ep0csr, pwr_reg); |
| 944 | |
| 945 | dev->gadget.speed = USB_SPEED_UNKNOWN; |
| 946 | udc_write(0x00, S3C2410_UDC_INDEX_REG); |
| 947 | udc_write((dev->ep[0].ep.maxpacket & 0x7ff) >> 3, |
| 948 | S3C2410_UDC_MAXP_REG); |
| 949 | dev->address = 0; |
| 950 | |
| 951 | dev->ep0state = EP0_IDLE; |
| 952 | dev->gadget.speed = USB_SPEED_FULL; |
| 953 | |
| 954 | /* clear interrupt */ |
| 955 | udc_write(S3C2410_UDC_USBINT_RESET, |
| 956 | S3C2410_UDC_USB_INT_REG); |
| 957 | |
| 958 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 959 | spin_unlock_irqrestore(&dev->lock, flags); |
| 960 | return IRQ_HANDLED; |
| 961 | } |
| 962 | |
| 963 | /* RESUME */ |
| 964 | if (usb_status & S3C2410_UDC_USBINT_RESUME) { |
| 965 | dprintk(DEBUG_NORMAL, "USB resume\n"); |
| 966 | |
| 967 | /* clear interrupt */ |
| 968 | udc_write(S3C2410_UDC_USBINT_RESUME, |
| 969 | S3C2410_UDC_USB_INT_REG); |
| 970 | |
| 971 | if (dev->gadget.speed != USB_SPEED_UNKNOWN |
| 972 | && dev->driver |
| 973 | && dev->driver->resume) |
| 974 | dev->driver->resume(&dev->gadget); |
| 975 | } |
| 976 | |
| 977 | /* SUSPEND */ |
| 978 | if (usb_status & S3C2410_UDC_USBINT_SUSPEND) { |
| 979 | dprintk(DEBUG_NORMAL, "USB suspend\n"); |
| 980 | |
| 981 | /* clear interrupt */ |
| 982 | udc_write(S3C2410_UDC_USBINT_SUSPEND, |
| 983 | S3C2410_UDC_USB_INT_REG); |
| 984 | |
| 985 | if (dev->gadget.speed != USB_SPEED_UNKNOWN |
| 986 | && dev->driver |
| 987 | && dev->driver->suspend) |
| 988 | dev->driver->suspend(&dev->gadget); |
| 989 | |
| 990 | dev->ep0state = EP0_IDLE; |
| 991 | } |
| 992 | |
| 993 | /* EP */ |
| 994 | /* control traffic */ |
| 995 | /* check on ep0csr != 0 is not a good idea as clearing in_pkt_ready |
| 996 | * generate an interrupt |
| 997 | */ |
| 998 | if (usbd_status & S3C2410_UDC_INT_EP0) { |
| 999 | dprintk(DEBUG_VERBOSE, "USB ep0 irq\n"); |
| 1000 | /* Clear the interrupt bit by setting it to 1 */ |
| 1001 | udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG); |
| 1002 | s3c2410_udc_handle_ep0(dev); |
| 1003 | } |
| 1004 | |
| 1005 | /* endpoint data transfers */ |
| 1006 | for (i = 1; i < S3C2410_ENDPOINTS; i++) { |
| 1007 | u32 tmp = 1 << i; |
| 1008 | if (usbd_status & tmp) { |
| 1009 | dprintk(DEBUG_VERBOSE, "USB ep%d irq\n", i); |
| 1010 | |
| 1011 | /* Clear the interrupt bit by setting it to 1 */ |
| 1012 | udc_write(tmp, S3C2410_UDC_EP_INT_REG); |
| 1013 | s3c2410_udc_handle_ep(&dev->ep[i]); |
| 1014 | } |
| 1015 | } |
| 1016 | |
Jeff Garzik | d8d4223 | 2007-11-21 15:13:10 -0800 | [diff] [blame] | 1017 | dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1018 | |
| 1019 | /* Restore old index */ |
| 1020 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 1021 | |
| 1022 | spin_unlock_irqrestore(&dev->lock, flags); |
| 1023 | |
| 1024 | return IRQ_HANDLED; |
| 1025 | } |
| 1026 | /*------------------------- s3c2410_ep_ops ----------------------------------*/ |
| 1027 | |
| 1028 | static inline struct s3c2410_ep *to_s3c2410_ep(struct usb_ep *ep) |
| 1029 | { |
| 1030 | return container_of(ep, struct s3c2410_ep, ep); |
| 1031 | } |
| 1032 | |
| 1033 | static inline struct s3c2410_udc *to_s3c2410_udc(struct usb_gadget *gadget) |
| 1034 | { |
| 1035 | return container_of(gadget, struct s3c2410_udc, gadget); |
| 1036 | } |
| 1037 | |
| 1038 | static inline struct s3c2410_request *to_s3c2410_req(struct usb_request *req) |
| 1039 | { |
| 1040 | return container_of(req, struct s3c2410_request, req); |
| 1041 | } |
| 1042 | |
| 1043 | /* |
| 1044 | * s3c2410_udc_ep_enable |
| 1045 | */ |
| 1046 | static int s3c2410_udc_ep_enable(struct usb_ep *_ep, |
| 1047 | const struct usb_endpoint_descriptor *desc) |
| 1048 | { |
| 1049 | struct s3c2410_udc *dev; |
| 1050 | struct s3c2410_ep *ep; |
| 1051 | u32 max, tmp; |
| 1052 | unsigned long flags; |
| 1053 | u32 csr1,csr2; |
| 1054 | u32 int_en_reg; |
| 1055 | |
| 1056 | ep = to_s3c2410_ep(_ep); |
| 1057 | |
| 1058 | if (!_ep || !desc || ep->desc |
| 1059 | || _ep->name == ep0name |
| 1060 | || desc->bDescriptorType != USB_DT_ENDPOINT) |
| 1061 | return -EINVAL; |
| 1062 | |
| 1063 | dev = ep->dev; |
| 1064 | if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) |
| 1065 | return -ESHUTDOWN; |
| 1066 | |
| 1067 | max = le16_to_cpu(desc->wMaxPacketSize) & 0x1fff; |
| 1068 | |
| 1069 | local_irq_save (flags); |
| 1070 | _ep->maxpacket = max & 0x7ff; |
| 1071 | ep->desc = desc; |
| 1072 | ep->halted = 0; |
| 1073 | ep->bEndpointAddress = desc->bEndpointAddress; |
| 1074 | |
| 1075 | /* set max packet */ |
| 1076 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1077 | udc_write(max >> 3, S3C2410_UDC_MAXP_REG); |
| 1078 | |
| 1079 | /* set type, direction, address; reset fifo counters */ |
| 1080 | if (desc->bEndpointAddress & USB_DIR_IN) { |
| 1081 | csr1 = S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT; |
| 1082 | csr2 = S3C2410_UDC_ICSR2_MODEIN|S3C2410_UDC_ICSR2_DMAIEN; |
| 1083 | |
| 1084 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1085 | udc_write(csr1, S3C2410_UDC_IN_CSR1_REG); |
| 1086 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1087 | udc_write(csr2, S3C2410_UDC_IN_CSR2_REG); |
| 1088 | } else { |
| 1089 | /* don't flush in fifo or it will cause endpoint interrupt */ |
| 1090 | csr1 = S3C2410_UDC_ICSR1_CLRDT; |
| 1091 | csr2 = S3C2410_UDC_ICSR2_DMAIEN; |
| 1092 | |
| 1093 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1094 | udc_write(csr1, S3C2410_UDC_IN_CSR1_REG); |
| 1095 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1096 | udc_write(csr2, S3C2410_UDC_IN_CSR2_REG); |
| 1097 | |
| 1098 | csr1 = S3C2410_UDC_OCSR1_FFLUSH | S3C2410_UDC_OCSR1_CLRDT; |
| 1099 | csr2 = S3C2410_UDC_OCSR2_DMAIEN; |
| 1100 | |
| 1101 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1102 | udc_write(csr1, S3C2410_UDC_OUT_CSR1_REG); |
| 1103 | udc_write(ep->num, S3C2410_UDC_INDEX_REG); |
| 1104 | udc_write(csr2, S3C2410_UDC_OUT_CSR2_REG); |
| 1105 | } |
| 1106 | |
| 1107 | /* enable irqs */ |
| 1108 | int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); |
| 1109 | udc_write(int_en_reg | (1 << ep->num), S3C2410_UDC_EP_INT_EN_REG); |
| 1110 | |
| 1111 | /* print some debug message */ |
| 1112 | tmp = desc->bEndpointAddress; |
| 1113 | dprintk (DEBUG_NORMAL, "enable %s(%d) ep%x%s-blk max %02x\n", |
| 1114 | _ep->name,ep->num, tmp, |
| 1115 | desc->bEndpointAddress & USB_DIR_IN ? "in" : "out", max); |
| 1116 | |
| 1117 | local_irq_restore (flags); |
| 1118 | s3c2410_udc_set_halt(_ep, 0); |
| 1119 | |
| 1120 | return 0; |
| 1121 | } |
| 1122 | |
| 1123 | /* |
| 1124 | * s3c2410_udc_ep_disable |
| 1125 | */ |
| 1126 | static int s3c2410_udc_ep_disable(struct usb_ep *_ep) |
| 1127 | { |
| 1128 | struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| 1129 | unsigned long flags; |
| 1130 | u32 int_en_reg; |
| 1131 | |
| 1132 | if (!_ep || !ep->desc) { |
| 1133 | dprintk(DEBUG_NORMAL, "%s not enabled\n", |
| 1134 | _ep ? ep->ep.name : NULL); |
| 1135 | return -EINVAL; |
| 1136 | } |
| 1137 | |
| 1138 | local_irq_save(flags); |
| 1139 | |
| 1140 | dprintk(DEBUG_NORMAL, "ep_disable: %s\n", _ep->name); |
| 1141 | |
| 1142 | ep->desc = NULL; |
| 1143 | ep->halted = 1; |
| 1144 | |
| 1145 | s3c2410_udc_nuke (ep->dev, ep, -ESHUTDOWN); |
| 1146 | |
| 1147 | /* disable irqs */ |
| 1148 | int_en_reg = udc_read(S3C2410_UDC_EP_INT_EN_REG); |
| 1149 | udc_write(int_en_reg & ~(1<<ep->num), S3C2410_UDC_EP_INT_EN_REG); |
| 1150 | |
| 1151 | local_irq_restore(flags); |
| 1152 | |
| 1153 | dprintk(DEBUG_NORMAL, "%s disabled\n", _ep->name); |
| 1154 | |
| 1155 | return 0; |
| 1156 | } |
| 1157 | |
| 1158 | /* |
| 1159 | * s3c2410_udc_alloc_request |
| 1160 | */ |
| 1161 | static struct usb_request * |
| 1162 | s3c2410_udc_alloc_request(struct usb_ep *_ep, gfp_t mem_flags) |
| 1163 | { |
| 1164 | struct s3c2410_request *req; |
| 1165 | |
| 1166 | dprintk(DEBUG_VERBOSE,"%s(%p,%d)\n", __func__, _ep, mem_flags); |
| 1167 | |
| 1168 | if (!_ep) |
| 1169 | return NULL; |
| 1170 | |
| 1171 | req = kzalloc (sizeof(struct s3c2410_request), mem_flags); |
| 1172 | if (!req) |
| 1173 | return NULL; |
| 1174 | |
| 1175 | INIT_LIST_HEAD (&req->queue); |
| 1176 | return &req->req; |
| 1177 | } |
| 1178 | |
| 1179 | /* |
| 1180 | * s3c2410_udc_free_request |
| 1181 | */ |
| 1182 | static void |
| 1183 | s3c2410_udc_free_request(struct usb_ep *_ep, struct usb_request *_req) |
| 1184 | { |
| 1185 | struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| 1186 | struct s3c2410_request *req = to_s3c2410_req(_req); |
| 1187 | |
| 1188 | dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); |
| 1189 | |
| 1190 | if (!ep || !_req || (!ep->desc && _ep->name != ep0name)) |
| 1191 | return; |
| 1192 | |
| 1193 | WARN_ON (!list_empty (&req->queue)); |
| 1194 | kfree(req); |
| 1195 | } |
| 1196 | |
| 1197 | /* |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1198 | * s3c2410_udc_queue |
| 1199 | */ |
| 1200 | static int s3c2410_udc_queue(struct usb_ep *_ep, struct usb_request *_req, |
| 1201 | gfp_t gfp_flags) |
| 1202 | { |
| 1203 | struct s3c2410_request *req = to_s3c2410_req(_req); |
| 1204 | struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| 1205 | struct s3c2410_udc *dev; |
| 1206 | u32 ep_csr = 0; |
| 1207 | int fifo_count = 0; |
| 1208 | unsigned long flags; |
| 1209 | |
| 1210 | if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { |
| 1211 | dprintk(DEBUG_NORMAL, "%s: invalid args\n", __func__); |
| 1212 | return -EINVAL; |
| 1213 | } |
| 1214 | |
| 1215 | dev = ep->dev; |
| 1216 | if (unlikely (!dev->driver |
| 1217 | || dev->gadget.speed == USB_SPEED_UNKNOWN)) { |
| 1218 | return -ESHUTDOWN; |
| 1219 | } |
| 1220 | |
| 1221 | local_irq_save (flags); |
| 1222 | |
| 1223 | if (unlikely(!_req || !_req->complete |
| 1224 | || !_req->buf || !list_empty(&req->queue))) { |
| 1225 | if (!_req) |
| 1226 | dprintk(DEBUG_NORMAL, "%s: 1 X X X\n", __func__); |
| 1227 | else { |
| 1228 | dprintk(DEBUG_NORMAL, "%s: 0 %01d %01d %01d\n", |
| 1229 | __func__, !_req->complete,!_req->buf, |
| 1230 | !list_empty(&req->queue)); |
| 1231 | } |
| 1232 | |
| 1233 | local_irq_restore(flags); |
| 1234 | return -EINVAL; |
| 1235 | } |
| 1236 | |
| 1237 | _req->status = -EINPROGRESS; |
| 1238 | _req->actual = 0; |
| 1239 | |
| 1240 | dprintk(DEBUG_VERBOSE, "%s: ep%x len %d\n", |
| 1241 | __func__, ep->bEndpointAddress, _req->length); |
| 1242 | |
| 1243 | if (ep->bEndpointAddress) { |
| 1244 | udc_write(ep->bEndpointAddress & 0x7F, S3C2410_UDC_INDEX_REG); |
| 1245 | |
| 1246 | ep_csr = udc_read((ep->bEndpointAddress & USB_DIR_IN) |
| 1247 | ? S3C2410_UDC_IN_CSR1_REG |
| 1248 | : S3C2410_UDC_OUT_CSR1_REG); |
| 1249 | fifo_count = s3c2410_udc_fifo_count_out(); |
| 1250 | } else { |
| 1251 | udc_write(0, S3C2410_UDC_INDEX_REG); |
| 1252 | ep_csr = udc_read(S3C2410_UDC_IN_CSR1_REG); |
| 1253 | fifo_count = s3c2410_udc_fifo_count_out(); |
| 1254 | } |
| 1255 | |
| 1256 | /* kickstart this i/o queue? */ |
| 1257 | if (list_empty(&ep->queue) && !ep->halted) { |
| 1258 | if (ep->bEndpointAddress == 0 /* ep0 */) { |
| 1259 | switch (dev->ep0state) { |
| 1260 | case EP0_IN_DATA_PHASE: |
| 1261 | if (!(ep_csr&S3C2410_UDC_EP0_CSR_IPKRDY) |
| 1262 | && s3c2410_udc_write_fifo(ep, |
| 1263 | req)) { |
| 1264 | dev->ep0state = EP0_IDLE; |
| 1265 | req = NULL; |
| 1266 | } |
| 1267 | break; |
| 1268 | |
| 1269 | case EP0_OUT_DATA_PHASE: |
| 1270 | if ((!_req->length) |
| 1271 | || ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY) |
| 1272 | && s3c2410_udc_read_fifo(ep, |
| 1273 | req))) { |
| 1274 | dev->ep0state = EP0_IDLE; |
| 1275 | req = NULL; |
| 1276 | } |
| 1277 | break; |
| 1278 | |
| 1279 | default: |
| 1280 | local_irq_restore(flags); |
| 1281 | return -EL2HLT; |
| 1282 | } |
| 1283 | } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0 |
| 1284 | && (!(ep_csr&S3C2410_UDC_OCSR1_PKTRDY)) |
| 1285 | && s3c2410_udc_write_fifo(ep, req)) { |
| 1286 | req = NULL; |
| 1287 | } else if ((ep_csr & S3C2410_UDC_OCSR1_PKTRDY) |
| 1288 | && fifo_count |
| 1289 | && s3c2410_udc_read_fifo(ep, req)) { |
| 1290 | req = NULL; |
| 1291 | } |
| 1292 | } |
| 1293 | |
| 1294 | /* pio or dma irq handler advances the queue. */ |
| 1295 | if (likely (req != 0)) |
| 1296 | list_add_tail(&req->queue, &ep->queue); |
| 1297 | |
| 1298 | local_irq_restore(flags); |
| 1299 | |
| 1300 | dprintk(DEBUG_VERBOSE, "%s ok\n", __func__); |
| 1301 | return 0; |
| 1302 | } |
| 1303 | |
| 1304 | /* |
| 1305 | * s3c2410_udc_dequeue |
| 1306 | */ |
| 1307 | static int s3c2410_udc_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| 1308 | { |
| 1309 | struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| 1310 | struct s3c2410_udc *udc; |
| 1311 | int retval = -EINVAL; |
| 1312 | unsigned long flags; |
| 1313 | struct s3c2410_request *req = NULL; |
| 1314 | |
| 1315 | dprintk(DEBUG_VERBOSE, "%s(%p,%p)\n", __func__, _ep, _req); |
| 1316 | |
| 1317 | if (!the_controller->driver) |
| 1318 | return -ESHUTDOWN; |
| 1319 | |
| 1320 | if (!_ep || !_req) |
| 1321 | return retval; |
| 1322 | |
| 1323 | udc = to_s3c2410_udc(ep->gadget); |
| 1324 | |
| 1325 | local_irq_save (flags); |
| 1326 | |
| 1327 | list_for_each_entry (req, &ep->queue, queue) { |
| 1328 | if (&req->req == _req) { |
| 1329 | list_del_init (&req->queue); |
| 1330 | _req->status = -ECONNRESET; |
| 1331 | retval = 0; |
| 1332 | break; |
| 1333 | } |
| 1334 | } |
| 1335 | |
| 1336 | if (retval == 0) { |
| 1337 | dprintk(DEBUG_VERBOSE, |
| 1338 | "dequeued req %p from %s, len %d buf %p\n", |
| 1339 | req, _ep->name, _req->length, _req->buf); |
| 1340 | |
| 1341 | s3c2410_udc_done(ep, req, -ECONNRESET); |
| 1342 | } |
| 1343 | |
| 1344 | local_irq_restore (flags); |
| 1345 | return retval; |
| 1346 | } |
| 1347 | |
| 1348 | /* |
| 1349 | * s3c2410_udc_set_halt |
| 1350 | */ |
| 1351 | static int s3c2410_udc_set_halt(struct usb_ep *_ep, int value) |
| 1352 | { |
| 1353 | struct s3c2410_ep *ep = to_s3c2410_ep(_ep); |
| 1354 | u32 ep_csr = 0; |
| 1355 | unsigned long flags; |
| 1356 | u32 idx; |
| 1357 | |
| 1358 | if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) { |
| 1359 | dprintk(DEBUG_NORMAL, "%s: inval 2\n", __func__); |
| 1360 | return -EINVAL; |
| 1361 | } |
| 1362 | |
| 1363 | local_irq_save (flags); |
| 1364 | |
| 1365 | idx = ep->bEndpointAddress & 0x7F; |
| 1366 | |
| 1367 | if (idx == 0) { |
| 1368 | s3c2410_udc_set_ep0_ss(base_addr); |
| 1369 | s3c2410_udc_set_ep0_de_out(base_addr); |
| 1370 | } else { |
| 1371 | udc_write(idx, S3C2410_UDC_INDEX_REG); |
| 1372 | ep_csr = udc_read((ep->bEndpointAddress &USB_DIR_IN) |
| 1373 | ? S3C2410_UDC_IN_CSR1_REG |
| 1374 | : S3C2410_UDC_OUT_CSR1_REG); |
| 1375 | |
| 1376 | if ((ep->bEndpointAddress & USB_DIR_IN) != 0) { |
| 1377 | if (value) |
| 1378 | udc_write(ep_csr | S3C2410_UDC_ICSR1_SENDSTL, |
| 1379 | S3C2410_UDC_IN_CSR1_REG); |
| 1380 | else { |
| 1381 | ep_csr &= ~S3C2410_UDC_ICSR1_SENDSTL; |
| 1382 | udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG); |
| 1383 | ep_csr |= S3C2410_UDC_ICSR1_CLRDT; |
| 1384 | udc_write(ep_csr, S3C2410_UDC_IN_CSR1_REG); |
| 1385 | } |
| 1386 | } else { |
| 1387 | if (value) |
| 1388 | udc_write(ep_csr | S3C2410_UDC_OCSR1_SENDSTL, |
| 1389 | S3C2410_UDC_OUT_CSR1_REG); |
| 1390 | else { |
| 1391 | ep_csr &= ~S3C2410_UDC_OCSR1_SENDSTL; |
| 1392 | udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG); |
| 1393 | ep_csr |= S3C2410_UDC_OCSR1_CLRDT; |
| 1394 | udc_write(ep_csr, S3C2410_UDC_OUT_CSR1_REG); |
| 1395 | } |
| 1396 | } |
| 1397 | } |
| 1398 | |
| 1399 | ep->halted = value ? 1 : 0; |
| 1400 | local_irq_restore (flags); |
| 1401 | |
| 1402 | return 0; |
| 1403 | } |
| 1404 | |
| 1405 | static const struct usb_ep_ops s3c2410_ep_ops = { |
| 1406 | .enable = s3c2410_udc_ep_enable, |
| 1407 | .disable = s3c2410_udc_ep_disable, |
| 1408 | |
| 1409 | .alloc_request = s3c2410_udc_alloc_request, |
| 1410 | .free_request = s3c2410_udc_free_request, |
| 1411 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1412 | .queue = s3c2410_udc_queue, |
| 1413 | .dequeue = s3c2410_udc_dequeue, |
| 1414 | |
| 1415 | .set_halt = s3c2410_udc_set_halt, |
| 1416 | }; |
| 1417 | |
| 1418 | /*------------------------- usb_gadget_ops ----------------------------------*/ |
| 1419 | |
| 1420 | /* |
| 1421 | * s3c2410_udc_get_frame |
| 1422 | */ |
| 1423 | static int s3c2410_udc_get_frame(struct usb_gadget *_gadget) |
| 1424 | { |
| 1425 | int tmp; |
| 1426 | |
| 1427 | dprintk(DEBUG_VERBOSE, "%s()\n", __func__); |
| 1428 | |
| 1429 | tmp = udc_read(S3C2410_UDC_FRAME_NUM2_REG) << 8; |
| 1430 | tmp |= udc_read(S3C2410_UDC_FRAME_NUM1_REG); |
| 1431 | return tmp; |
| 1432 | } |
| 1433 | |
| 1434 | /* |
| 1435 | * s3c2410_udc_wakeup |
| 1436 | */ |
| 1437 | static int s3c2410_udc_wakeup(struct usb_gadget *_gadget) |
| 1438 | { |
| 1439 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1440 | return 0; |
| 1441 | } |
| 1442 | |
| 1443 | /* |
| 1444 | * s3c2410_udc_set_selfpowered |
| 1445 | */ |
| 1446 | static int s3c2410_udc_set_selfpowered(struct usb_gadget *gadget, int value) |
| 1447 | { |
| 1448 | struct s3c2410_udc *udc = to_s3c2410_udc(gadget); |
| 1449 | |
| 1450 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1451 | |
| 1452 | if (value) |
| 1453 | udc->devstatus |= (1 << USB_DEVICE_SELF_POWERED); |
| 1454 | else |
| 1455 | udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); |
| 1456 | |
| 1457 | return 0; |
| 1458 | } |
| 1459 | |
| 1460 | static void s3c2410_udc_disable(struct s3c2410_udc *dev); |
| 1461 | static void s3c2410_udc_enable(struct s3c2410_udc *dev); |
| 1462 | |
| 1463 | static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) |
| 1464 | { |
| 1465 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1466 | |
| 1467 | if (udc_info && udc_info->udc_command) { |
| 1468 | if (is_on) |
| 1469 | s3c2410_udc_enable(udc); |
| 1470 | else { |
| 1471 | if (udc->gadget.speed != USB_SPEED_UNKNOWN) { |
| 1472 | if (udc->driver && udc->driver->disconnect) |
| 1473 | udc->driver->disconnect(&udc->gadget); |
| 1474 | |
| 1475 | } |
| 1476 | s3c2410_udc_disable(udc); |
| 1477 | } |
| 1478 | } |
| 1479 | else |
| 1480 | return -EOPNOTSUPP; |
| 1481 | |
| 1482 | return 0; |
| 1483 | } |
| 1484 | |
| 1485 | static int s3c2410_udc_vbus_session(struct usb_gadget *gadget, int is_active) |
| 1486 | { |
| 1487 | struct s3c2410_udc *udc = to_s3c2410_udc(gadget); |
| 1488 | |
| 1489 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1490 | |
| 1491 | udc->vbus = (is_active != 0); |
| 1492 | s3c2410_udc_set_pullup(udc, is_active); |
| 1493 | return 0; |
| 1494 | } |
| 1495 | |
| 1496 | static int s3c2410_udc_pullup(struct usb_gadget *gadget, int is_on) |
| 1497 | { |
| 1498 | struct s3c2410_udc *udc = to_s3c2410_udc(gadget); |
| 1499 | |
| 1500 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1501 | |
| 1502 | s3c2410_udc_set_pullup(udc, is_on ? 0 : 1); |
| 1503 | return 0; |
| 1504 | } |
| 1505 | |
| 1506 | static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev) |
| 1507 | { |
| 1508 | struct s3c2410_udc *dev = _dev; |
| 1509 | unsigned int value; |
| 1510 | |
| 1511 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
Ben Dooks | 5f629ad7 | 2007-11-19 22:28:15 +0000 | [diff] [blame] | 1512 | |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1513 | value = gpio_get_value(udc_info->vbus_pin) ? 1 : 0; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1514 | if (udc_info->vbus_pin_inverted) |
| 1515 | value = !value; |
| 1516 | |
| 1517 | if (value != dev->vbus) |
| 1518 | s3c2410_udc_vbus_session(&dev->gadget, value); |
| 1519 | |
| 1520 | return IRQ_HANDLED; |
| 1521 | } |
| 1522 | |
| 1523 | static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma) |
| 1524 | { |
| 1525 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1526 | |
| 1527 | if (udc_info && udc_info->vbus_draw) { |
| 1528 | udc_info->vbus_draw(ma); |
| 1529 | return 0; |
| 1530 | } |
| 1531 | |
| 1532 | return -ENOTSUPP; |
| 1533 | } |
| 1534 | |
| 1535 | static const struct usb_gadget_ops s3c2410_ops = { |
| 1536 | .get_frame = s3c2410_udc_get_frame, |
| 1537 | .wakeup = s3c2410_udc_wakeup, |
| 1538 | .set_selfpowered = s3c2410_udc_set_selfpowered, |
| 1539 | .pullup = s3c2410_udc_pullup, |
| 1540 | .vbus_session = s3c2410_udc_vbus_session, |
| 1541 | .vbus_draw = s3c2410_vbus_draw, |
| 1542 | }; |
| 1543 | |
| 1544 | /*------------------------- gadget driver handling---------------------------*/ |
| 1545 | /* |
| 1546 | * s3c2410_udc_disable |
| 1547 | */ |
| 1548 | static void s3c2410_udc_disable(struct s3c2410_udc *dev) |
| 1549 | { |
| 1550 | dprintk(DEBUG_NORMAL, "%s()\n", __func__); |
| 1551 | |
| 1552 | /* Disable all interrupts */ |
| 1553 | udc_write(0x00, S3C2410_UDC_USB_INT_EN_REG); |
| 1554 | udc_write(0x00, S3C2410_UDC_EP_INT_EN_REG); |
| 1555 | |
| 1556 | /* Clear the interrupt registers */ |
| 1557 | udc_write(S3C2410_UDC_USBINT_RESET |
| 1558 | | S3C2410_UDC_USBINT_RESUME |
| 1559 | | S3C2410_UDC_USBINT_SUSPEND, |
| 1560 | S3C2410_UDC_USB_INT_REG); |
| 1561 | |
| 1562 | udc_write(0x1F, S3C2410_UDC_EP_INT_REG); |
| 1563 | |
| 1564 | /* Good bye, cruel world */ |
| 1565 | if (udc_info && udc_info->udc_command) |
| 1566 | udc_info->udc_command(S3C2410_UDC_P_DISABLE); |
| 1567 | |
| 1568 | /* Set speed to unknown */ |
| 1569 | dev->gadget.speed = USB_SPEED_UNKNOWN; |
| 1570 | } |
| 1571 | |
| 1572 | /* |
| 1573 | * s3c2410_udc_reinit |
| 1574 | */ |
| 1575 | static void s3c2410_udc_reinit(struct s3c2410_udc *dev) |
| 1576 | { |
| 1577 | u32 i; |
| 1578 | |
| 1579 | /* device/ep0 records init */ |
| 1580 | INIT_LIST_HEAD (&dev->gadget.ep_list); |
| 1581 | INIT_LIST_HEAD (&dev->gadget.ep0->ep_list); |
| 1582 | dev->ep0state = EP0_IDLE; |
| 1583 | |
| 1584 | for (i = 0; i < S3C2410_ENDPOINTS; i++) { |
| 1585 | struct s3c2410_ep *ep = &dev->ep[i]; |
| 1586 | |
| 1587 | if (i != 0) |
| 1588 | list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list); |
| 1589 | |
| 1590 | ep->dev = dev; |
| 1591 | ep->desc = NULL; |
| 1592 | ep->halted = 0; |
| 1593 | INIT_LIST_HEAD (&ep->queue); |
| 1594 | } |
| 1595 | } |
| 1596 | |
| 1597 | /* |
| 1598 | * s3c2410_udc_enable |
| 1599 | */ |
| 1600 | static void s3c2410_udc_enable(struct s3c2410_udc *dev) |
| 1601 | { |
| 1602 | int i; |
| 1603 | |
| 1604 | dprintk(DEBUG_NORMAL, "s3c2410_udc_enable called\n"); |
| 1605 | |
| 1606 | /* dev->gadget.speed = USB_SPEED_UNKNOWN; */ |
| 1607 | dev->gadget.speed = USB_SPEED_FULL; |
| 1608 | |
| 1609 | /* Set MAXP for all endpoints */ |
| 1610 | for (i = 0; i < S3C2410_ENDPOINTS; i++) { |
| 1611 | udc_write(i, S3C2410_UDC_INDEX_REG); |
| 1612 | udc_write((dev->ep[i].ep.maxpacket & 0x7ff) >> 3, |
| 1613 | S3C2410_UDC_MAXP_REG); |
| 1614 | } |
| 1615 | |
| 1616 | /* Set default power state */ |
| 1617 | udc_write(DEFAULT_POWER_STATE, S3C2410_UDC_PWR_REG); |
| 1618 | |
| 1619 | /* Enable reset and suspend interrupt interrupts */ |
| 1620 | udc_write(S3C2410_UDC_USBINT_RESET | S3C2410_UDC_USBINT_SUSPEND, |
| 1621 | S3C2410_UDC_USB_INT_EN_REG); |
| 1622 | |
| 1623 | /* Enable ep0 interrupt */ |
| 1624 | udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG); |
| 1625 | |
| 1626 | /* time to say "hello, world" */ |
| 1627 | if (udc_info && udc_info->udc_command) |
| 1628 | udc_info->udc_command(S3C2410_UDC_P_ENABLE); |
| 1629 | } |
| 1630 | |
| 1631 | /* |
| 1632 | * usb_gadget_register_driver |
| 1633 | */ |
| 1634 | int usb_gadget_register_driver(struct usb_gadget_driver *driver) |
| 1635 | { |
| 1636 | struct s3c2410_udc *udc = the_controller; |
| 1637 | int retval; |
| 1638 | |
| 1639 | dprintk(DEBUG_NORMAL, "usb_gadget_register_driver() '%s'\n", |
| 1640 | driver->driver.name); |
| 1641 | |
| 1642 | /* Sanity checks */ |
| 1643 | if (!udc) |
| 1644 | return -ENODEV; |
| 1645 | |
| 1646 | if (udc->driver) |
| 1647 | return -EBUSY; |
| 1648 | |
| 1649 | if (!driver->bind || !driver->setup |
Yauhen Kharuzhy | f9e9cff | 2008-09-12 09:02:23 -0700 | [diff] [blame] | 1650 | || driver->speed < USB_SPEED_FULL) { |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1651 | printk(KERN_ERR "Invalid driver: bind %p setup %p speed %d\n", |
| 1652 | driver->bind, driver->setup, driver->speed); |
| 1653 | return -EINVAL; |
| 1654 | } |
| 1655 | #if defined(MODULE) |
| 1656 | if (!driver->unbind) { |
| 1657 | printk(KERN_ERR "Invalid driver: no unbind method\n"); |
| 1658 | return -EINVAL; |
| 1659 | } |
| 1660 | #endif |
| 1661 | |
| 1662 | /* Hook the driver */ |
| 1663 | udc->driver = driver; |
| 1664 | udc->gadget.dev.driver = &driver->driver; |
| 1665 | |
| 1666 | /* Bind the driver */ |
| 1667 | if ((retval = device_add(&udc->gadget.dev)) != 0) { |
| 1668 | printk(KERN_ERR "Error in device_add() : %d\n",retval); |
| 1669 | goto register_error; |
| 1670 | } |
| 1671 | |
| 1672 | dprintk(DEBUG_NORMAL, "binding gadget driver '%s'\n", |
| 1673 | driver->driver.name); |
| 1674 | |
| 1675 | if ((retval = driver->bind (&udc->gadget)) != 0) { |
| 1676 | device_del(&udc->gadget.dev); |
| 1677 | goto register_error; |
| 1678 | } |
| 1679 | |
| 1680 | /* Enable udc */ |
| 1681 | s3c2410_udc_enable(udc); |
| 1682 | |
| 1683 | return 0; |
| 1684 | |
| 1685 | register_error: |
| 1686 | udc->driver = NULL; |
| 1687 | udc->gadget.dev.driver = NULL; |
| 1688 | return retval; |
| 1689 | } |
| 1690 | |
| 1691 | /* |
| 1692 | * usb_gadget_unregister_driver |
| 1693 | */ |
| 1694 | int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) |
| 1695 | { |
| 1696 | struct s3c2410_udc *udc = the_controller; |
| 1697 | |
| 1698 | if (!udc) |
| 1699 | return -ENODEV; |
| 1700 | |
| 1701 | if (!driver || driver != udc->driver || !driver->unbind) |
| 1702 | return -EINVAL; |
| 1703 | |
| 1704 | dprintk(DEBUG_NORMAL,"usb_gadget_register_driver() '%s'\n", |
| 1705 | driver->driver.name); |
| 1706 | |
| 1707 | if (driver->disconnect) |
| 1708 | driver->disconnect(&udc->gadget); |
| 1709 | |
| 1710 | device_del(&udc->gadget.dev); |
| 1711 | udc->driver = NULL; |
| 1712 | |
| 1713 | /* Disable udc */ |
| 1714 | s3c2410_udc_disable(udc); |
| 1715 | |
| 1716 | return 0; |
| 1717 | } |
| 1718 | |
| 1719 | /*---------------------------------------------------------------------------*/ |
| 1720 | static struct s3c2410_udc memory = { |
| 1721 | .gadget = { |
| 1722 | .ops = &s3c2410_ops, |
| 1723 | .ep0 = &memory.ep[0].ep, |
| 1724 | .name = gadget_name, |
| 1725 | .dev = { |
Kay Sievers | c682b17 | 2009-01-06 10:44:42 -0800 | [diff] [blame] | 1726 | .init_name = "gadget", |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1727 | }, |
| 1728 | }, |
| 1729 | |
| 1730 | /* control endpoint */ |
| 1731 | .ep[0] = { |
| 1732 | .num = 0, |
| 1733 | .ep = { |
| 1734 | .name = ep0name, |
| 1735 | .ops = &s3c2410_ep_ops, |
| 1736 | .maxpacket = EP0_FIFO_SIZE, |
| 1737 | }, |
| 1738 | .dev = &memory, |
| 1739 | }, |
| 1740 | |
| 1741 | /* first group of endpoints */ |
| 1742 | .ep[1] = { |
| 1743 | .num = 1, |
| 1744 | .ep = { |
| 1745 | .name = "ep1-bulk", |
| 1746 | .ops = &s3c2410_ep_ops, |
| 1747 | .maxpacket = EP_FIFO_SIZE, |
| 1748 | }, |
| 1749 | .dev = &memory, |
| 1750 | .fifo_size = EP_FIFO_SIZE, |
| 1751 | .bEndpointAddress = 1, |
| 1752 | .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| 1753 | }, |
| 1754 | .ep[2] = { |
| 1755 | .num = 2, |
| 1756 | .ep = { |
| 1757 | .name = "ep2-bulk", |
| 1758 | .ops = &s3c2410_ep_ops, |
| 1759 | .maxpacket = EP_FIFO_SIZE, |
| 1760 | }, |
| 1761 | .dev = &memory, |
| 1762 | .fifo_size = EP_FIFO_SIZE, |
| 1763 | .bEndpointAddress = 2, |
| 1764 | .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| 1765 | }, |
| 1766 | .ep[3] = { |
| 1767 | .num = 3, |
| 1768 | .ep = { |
| 1769 | .name = "ep3-bulk", |
| 1770 | .ops = &s3c2410_ep_ops, |
| 1771 | .maxpacket = EP_FIFO_SIZE, |
| 1772 | }, |
| 1773 | .dev = &memory, |
| 1774 | .fifo_size = EP_FIFO_SIZE, |
| 1775 | .bEndpointAddress = 3, |
| 1776 | .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| 1777 | }, |
| 1778 | .ep[4] = { |
| 1779 | .num = 4, |
| 1780 | .ep = { |
| 1781 | .name = "ep4-bulk", |
| 1782 | .ops = &s3c2410_ep_ops, |
| 1783 | .maxpacket = EP_FIFO_SIZE, |
| 1784 | }, |
| 1785 | .dev = &memory, |
| 1786 | .fifo_size = EP_FIFO_SIZE, |
| 1787 | .bEndpointAddress = 4, |
| 1788 | .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| 1789 | } |
| 1790 | |
| 1791 | }; |
| 1792 | |
| 1793 | /* |
| 1794 | * probe - binds to the platform device |
| 1795 | */ |
| 1796 | static int s3c2410_udc_probe(struct platform_device *pdev) |
| 1797 | { |
| 1798 | struct s3c2410_udc *udc = &memory; |
| 1799 | struct device *dev = &pdev->dev; |
| 1800 | int retval; |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1801 | int irq; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1802 | |
| 1803 | dev_dbg(dev, "%s()\n", __func__); |
| 1804 | |
| 1805 | usb_bus_clock = clk_get(NULL, "usb-bus-gadget"); |
| 1806 | if (IS_ERR(usb_bus_clock)) { |
| 1807 | dev_err(dev, "failed to get usb bus clock source\n"); |
| 1808 | return PTR_ERR(usb_bus_clock); |
| 1809 | } |
| 1810 | |
| 1811 | clk_enable(usb_bus_clock); |
| 1812 | |
| 1813 | udc_clock = clk_get(NULL, "usb-device"); |
| 1814 | if (IS_ERR(udc_clock)) { |
| 1815 | dev_err(dev, "failed to get udc clock source\n"); |
| 1816 | return PTR_ERR(udc_clock); |
| 1817 | } |
| 1818 | |
| 1819 | clk_enable(udc_clock); |
| 1820 | |
| 1821 | mdelay(10); |
| 1822 | |
| 1823 | dev_dbg(dev, "got and enabled clocks\n"); |
| 1824 | |
| 1825 | if (strncmp(pdev->name, "s3c2440", 7) == 0) { |
| 1826 | dev_info(dev, "S3C2440: increasing FIFO to 128 bytes\n"); |
| 1827 | memory.ep[1].fifo_size = S3C2440_EP_FIFO_SIZE; |
| 1828 | memory.ep[2].fifo_size = S3C2440_EP_FIFO_SIZE; |
| 1829 | memory.ep[3].fifo_size = S3C2440_EP_FIFO_SIZE; |
| 1830 | memory.ep[4].fifo_size = S3C2440_EP_FIFO_SIZE; |
| 1831 | } |
| 1832 | |
| 1833 | spin_lock_init (&udc->lock); |
| 1834 | udc_info = pdev->dev.platform_data; |
| 1835 | |
| 1836 | rsrc_start = S3C2410_PA_USBDEV; |
| 1837 | rsrc_len = S3C24XX_SZ_USBDEV; |
| 1838 | |
| 1839 | if (!request_mem_region(rsrc_start, rsrc_len, gadget_name)) |
| 1840 | return -EBUSY; |
| 1841 | |
| 1842 | base_addr = ioremap(rsrc_start, rsrc_len); |
| 1843 | if (!base_addr) { |
| 1844 | retval = -ENOMEM; |
| 1845 | goto err_mem; |
| 1846 | } |
| 1847 | |
| 1848 | device_initialize(&udc->gadget.dev); |
| 1849 | udc->gadget.dev.parent = &pdev->dev; |
| 1850 | udc->gadget.dev.dma_mask = pdev->dev.dma_mask; |
| 1851 | |
| 1852 | the_controller = udc; |
| 1853 | platform_set_drvdata(pdev, udc); |
| 1854 | |
| 1855 | s3c2410_udc_disable(udc); |
| 1856 | s3c2410_udc_reinit(udc); |
| 1857 | |
| 1858 | /* irq setup after old hardware state is cleaned up */ |
| 1859 | retval = request_irq(IRQ_USBD, s3c2410_udc_irq, |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1860 | IRQF_DISABLED, gadget_name, udc); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1861 | |
| 1862 | if (retval != 0) { |
| 1863 | dev_err(dev, "cannot get irq %i, err %d\n", IRQ_USBD, retval); |
| 1864 | retval = -EBUSY; |
| 1865 | goto err_map; |
| 1866 | } |
| 1867 | |
| 1868 | dev_dbg(dev, "got irq %i\n", IRQ_USBD); |
| 1869 | |
| 1870 | if (udc_info && udc_info->vbus_pin > 0) { |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1871 | retval = gpio_request(udc_info->vbus_pin, "udc vbus"); |
| 1872 | if (retval < 0) { |
| 1873 | dev_err(dev, "cannot claim vbus pin\n"); |
| 1874 | goto err_int; |
| 1875 | } |
| 1876 | |
| 1877 | irq = gpio_to_irq(udc_info->vbus_pin); |
| 1878 | if (irq < 0) { |
| 1879 | dev_err(dev, "no irq for gpio vbus pin\n"); |
| 1880 | goto err_gpio_claim; |
| 1881 | } |
| 1882 | |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1883 | retval = request_irq(irq, s3c2410_udc_vbus_irq, |
Ben Dooks | 8802bca | 2007-11-19 22:28:14 +0000 | [diff] [blame] | 1884 | IRQF_DISABLED | IRQF_TRIGGER_RISING |
| 1885 | | IRQF_TRIGGER_FALLING | IRQF_SHARED, |
| 1886 | gadget_name, udc); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1887 | |
| 1888 | if (retval != 0) { |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1889 | dev_err(dev, "can't get vbus irq %d, err %d\n", |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1890 | irq, retval); |
| 1891 | retval = -EBUSY; |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1892 | goto err_gpio_claim; |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1893 | } |
| 1894 | |
| 1895 | dev_dbg(dev, "got irq %i\n", irq); |
| 1896 | } else { |
| 1897 | udc->vbus = 1; |
| 1898 | } |
| 1899 | |
| 1900 | if (s3c2410_udc_debugfs_root) { |
| 1901 | udc->regs_info = debugfs_create_file("registers", S_IRUGO, |
| 1902 | s3c2410_udc_debugfs_root, |
| 1903 | udc, &s3c2410_udc_debugfs_fops); |
Zhaolei | d66937d | 2008-10-20 18:53:04 +0800 | [diff] [blame] | 1904 | if (!udc->regs_info) |
| 1905 | dev_warn(dev, "debugfs file creation failed\n"); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1906 | } |
| 1907 | |
| 1908 | dev_dbg(dev, "probe ok\n"); |
| 1909 | |
| 1910 | return 0; |
| 1911 | |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1912 | err_gpio_claim: |
| 1913 | if (udc_info && udc_info->vbus_pin > 0) |
| 1914 | gpio_free(udc_info->vbus_pin); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1915 | err_int: |
| 1916 | free_irq(IRQ_USBD, udc); |
| 1917 | err_map: |
| 1918 | iounmap(base_addr); |
| 1919 | err_mem: |
| 1920 | release_mem_region(rsrc_start, rsrc_len); |
| 1921 | |
| 1922 | return retval; |
| 1923 | } |
| 1924 | |
| 1925 | /* |
| 1926 | * s3c2410_udc_remove |
| 1927 | */ |
| 1928 | static int s3c2410_udc_remove(struct platform_device *pdev) |
| 1929 | { |
| 1930 | struct s3c2410_udc *udc = platform_get_drvdata(pdev); |
| 1931 | unsigned int irq; |
| 1932 | |
| 1933 | dev_dbg(&pdev->dev, "%s()\n", __func__); |
| 1934 | if (udc->driver) |
| 1935 | return -EBUSY; |
| 1936 | |
| 1937 | debugfs_remove(udc->regs_info); |
| 1938 | |
| 1939 | if (udc_info && udc_info->vbus_pin > 0) { |
Ben Dooks | ea99ecf | 2008-11-24 11:45:03 -0800 | [diff] [blame] | 1940 | irq = gpio_to_irq(udc_info->vbus_pin); |
Arnaud Patard | 3fc154b | 2007-06-06 21:05:49 -0700 | [diff] [blame] | 1941 | free_irq(irq, udc); |
| 1942 | } |
| 1943 | |
| 1944 | free_irq(IRQ_USBD, udc); |
| 1945 | |
| 1946 | iounmap(base_addr); |
| 1947 | release_mem_region(rsrc_start, rsrc_len); |
| 1948 | |
| 1949 | platform_set_drvdata(pdev, NULL); |
| 1950 | |
| 1951 | if (!IS_ERR(udc_clock) && udc_clock != NULL) { |
| 1952 | clk_disable(udc_clock); |
| 1953 | clk_put(udc_clock); |
| 1954 | udc_clock = NULL; |
| 1955 | } |
| 1956 | |
| 1957 | if (!IS_ERR(usb_bus_clock) && usb_bus_clock != NULL) { |
| 1958 | clk_disable(usb_bus_clock); |
| 1959 | clk_put(usb_bus_clock); |
| 1960 | usb_bus_clock = NULL; |
| 1961 | } |
| 1962 | |
| 1963 | dev_dbg(&pdev->dev, "%s: remove ok\n", __func__); |
| 1964 | return 0; |
| 1965 | } |
| 1966 | |
| 1967 | #ifdef CONFIG_PM |
| 1968 | static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) |
| 1969 | { |
| 1970 | if (udc_info && udc_info->udc_command) |
| 1971 | udc_info->udc_command(S3C2410_UDC_P_DISABLE); |
| 1972 | |
| 1973 | return 0; |
| 1974 | } |
| 1975 | |
| 1976 | static int s3c2410_udc_resume(struct platform_device *pdev) |
| 1977 | { |
| 1978 | if (udc_info && udc_info->udc_command) |
| 1979 | udc_info->udc_command(S3C2410_UDC_P_ENABLE); |
| 1980 | |
| 1981 | return 0; |
| 1982 | } |
| 1983 | #else |
| 1984 | #define s3c2410_udc_suspend NULL |
| 1985 | #define s3c2410_udc_resume NULL |
| 1986 | #endif |
| 1987 | |
| 1988 | static struct platform_driver udc_driver_2410 = { |
| 1989 | .driver = { |
| 1990 | .name = "s3c2410-usbgadget", |
| 1991 | .owner = THIS_MODULE, |
| 1992 | }, |
| 1993 | .probe = s3c2410_udc_probe, |
| 1994 | .remove = s3c2410_udc_remove, |
| 1995 | .suspend = s3c2410_udc_suspend, |
| 1996 | .resume = s3c2410_udc_resume, |
| 1997 | }; |
| 1998 | |
| 1999 | static struct platform_driver udc_driver_2440 = { |
| 2000 | .driver = { |
| 2001 | .name = "s3c2440-usbgadget", |
| 2002 | .owner = THIS_MODULE, |
| 2003 | }, |
| 2004 | .probe = s3c2410_udc_probe, |
| 2005 | .remove = s3c2410_udc_remove, |
| 2006 | .suspend = s3c2410_udc_suspend, |
| 2007 | .resume = s3c2410_udc_resume, |
| 2008 | }; |
| 2009 | |
| 2010 | static int __init udc_init(void) |
| 2011 | { |
| 2012 | int retval; |
| 2013 | |
| 2014 | dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION); |
| 2015 | |
| 2016 | s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL); |
| 2017 | if (IS_ERR(s3c2410_udc_debugfs_root)) { |
| 2018 | printk(KERN_ERR "%s: debugfs dir creation failed %ld\n", |
| 2019 | gadget_name, PTR_ERR(s3c2410_udc_debugfs_root)); |
| 2020 | s3c2410_udc_debugfs_root = NULL; |
| 2021 | } |
| 2022 | |
| 2023 | retval = platform_driver_register(&udc_driver_2410); |
| 2024 | if (retval) |
| 2025 | goto err; |
| 2026 | |
| 2027 | retval = platform_driver_register(&udc_driver_2440); |
| 2028 | if (retval) |
| 2029 | goto err; |
| 2030 | |
| 2031 | return 0; |
| 2032 | |
| 2033 | err: |
| 2034 | debugfs_remove(s3c2410_udc_debugfs_root); |
| 2035 | return retval; |
| 2036 | } |
| 2037 | |
| 2038 | static void __exit udc_exit(void) |
| 2039 | { |
| 2040 | platform_driver_unregister(&udc_driver_2410); |
| 2041 | platform_driver_unregister(&udc_driver_2440); |
| 2042 | debugfs_remove(s3c2410_udc_debugfs_root); |
| 2043 | } |
| 2044 | |
| 2045 | EXPORT_SYMBOL(usb_gadget_unregister_driver); |
| 2046 | EXPORT_SYMBOL(usb_gadget_register_driver); |
| 2047 | |
| 2048 | module_init(udc_init); |
| 2049 | module_exit(udc_exit); |
| 2050 | |
| 2051 | MODULE_AUTHOR(DRIVER_AUTHOR); |
| 2052 | MODULE_DESCRIPTION(DRIVER_DESC); |
| 2053 | MODULE_VERSION(DRIVER_VERSION); |
| 2054 | MODULE_LICENSE("GPL"); |
Kay Sievers | f34c32f | 2008-04-10 21:29:21 -0700 | [diff] [blame] | 2055 | MODULE_ALIAS("platform:s3c2410-usbgadget"); |
| 2056 | MODULE_ALIAS("platform:s3c2440-usbgadget"); |