Jonathan Cameron | 5aeb1a5 | 2009-05-12 19:37:21 +0000 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/pcmcia/pxa2xx_stargate2.c |
| 3 | * |
| 4 | * Stargate 2 PCMCIA specific routines. |
| 5 | * |
| 6 | * Created: December 6, 2005 |
| 7 | * Author: Ed C. Epp |
| 8 | * Copyright: Intel Corp 2005 |
| 9 | * Jonathan Cameron <jic23@cam.ac.uk> 2009 |
| 10 | * |
| 11 | * This program is free software; you can redistribute it and/or modify |
| 12 | * it under the terms of the GNU General Public License version 2 as |
| 13 | * published by the Free Software Foundation. |
| 14 | */ |
| 15 | |
| 16 | #include <linux/module.h> |
| 17 | #include <linux/init.h> |
| 18 | #include <linux/kernel.h> |
| 19 | #include <linux/interrupt.h> |
| 20 | #include <linux/delay.h> |
| 21 | #include <linux/platform_device.h> |
| 22 | #include <linux/gpio.h> |
| 23 | |
| 24 | #include <pcmcia/ss.h> |
| 25 | |
| 26 | #include <asm/irq.h> |
| 27 | #include <asm/mach-types.h> |
| 28 | |
| 29 | #include "soc_common.h" |
| 30 | |
| 31 | #define SG2_S0_BUFF_CTL 120 |
| 32 | #define SG2_S0_POWER_CTL 108 |
| 33 | #define SG2_S0_GPIO_RESET 82 |
| 34 | #define SG2_S0_GPIO_DETECT 53 |
| 35 | #define SG2_S0_GPIO_READY 81 |
| 36 | |
| 37 | static struct pcmcia_irqs irqs[] = { |
| 38 | { 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" }, |
| 39 | }; |
| 40 | |
| 41 | static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt) |
| 42 | { |
Eric Miao | 0029397 | 2009-12-09 18:54:05 +0800 | [diff] [blame] | 43 | skt->socket.pci_irq = IRQ_GPIO(SG2_S0_GPIO_READY); |
Jonathan Cameron | 5aeb1a5 | 2009-05-12 19:37:21 +0000 | [diff] [blame] | 44 | return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
| 45 | } |
| 46 | |
| 47 | static void sg2_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) |
| 48 | { |
| 49 | soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
| 50 | } |
| 51 | |
| 52 | static void sg2_pcmcia_socket_state(struct soc_pcmcia_socket *skt, |
| 53 | struct pcmcia_state *state) |
| 54 | { |
| 55 | state->detect = !gpio_get_value(SG2_S0_GPIO_DETECT); |
| 56 | state->ready = !!gpio_get_value(SG2_S0_GPIO_READY); |
| 57 | state->bvd1 = 0; /* not available - battery detect on card */ |
| 58 | state->bvd2 = 0; /* not available */ |
| 59 | state->vs_3v = 1; /* not available - voltage detect for card */ |
| 60 | state->vs_Xv = 0; /* not available */ |
| 61 | state->wrprot = 0; /* not available - write protect */ |
| 62 | } |
| 63 | |
| 64 | static int sg2_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, |
| 65 | const socket_state_t *state) |
| 66 | { |
| 67 | /* Enable card power */ |
| 68 | switch (state->Vcc) { |
| 69 | case 0: |
| 70 | /* sets power ctl register high */ |
| 71 | gpio_set_value(SG2_S0_POWER_CTL, 1); |
| 72 | break; |
| 73 | case 33: |
| 74 | case 50: |
| 75 | /* sets power control register low (clear) */ |
| 76 | gpio_set_value(SG2_S0_POWER_CTL, 0); |
| 77 | msleep(100); |
| 78 | break; |
| 79 | default: |
| 80 | pr_err("%s(): bad Vcc %u\n", |
| 81 | __func__, state->Vcc); |
| 82 | return -1; |
| 83 | } |
| 84 | |
| 85 | /* reset */ |
| 86 | gpio_set_value(SG2_S0_GPIO_RESET, !!(state->flags & SS_RESET)); |
| 87 | |
| 88 | return 0; |
| 89 | } |
| 90 | |
| 91 | static void sg2_pcmcia_socket_init(struct soc_pcmcia_socket *skt) |
| 92 | { |
| 93 | soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
| 94 | } |
| 95 | |
| 96 | static void sg2_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) |
| 97 | { |
| 98 | soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
| 99 | } |
| 100 | |
| 101 | static struct pcmcia_low_level sg2_pcmcia_ops __initdata = { |
| 102 | .owner = THIS_MODULE, |
| 103 | .hw_init = sg2_pcmcia_hw_init, |
| 104 | .hw_shutdown = sg2_pcmcia_hw_shutdown, |
| 105 | .socket_state = sg2_pcmcia_socket_state, |
| 106 | .configure_socket = sg2_pcmcia_configure_socket, |
| 107 | .socket_init = sg2_pcmcia_socket_init, |
| 108 | .socket_suspend = sg2_pcmcia_socket_suspend, |
| 109 | .nr = 1, |
| 110 | }; |
| 111 | |
| 112 | static struct platform_device *sg2_pcmcia_device; |
| 113 | |
| 114 | static int __init sg2_pcmcia_init(void) |
| 115 | { |
| 116 | int ret; |
| 117 | |
| 118 | if (!machine_is_stargate2()) |
| 119 | return -ENODEV; |
| 120 | |
| 121 | sg2_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); |
| 122 | if (!sg2_pcmcia_device) |
| 123 | return -ENOMEM; |
| 124 | |
| 125 | ret = gpio_request(SG2_S0_BUFF_CTL, "SG2 CF buff ctl"); |
| 126 | if (ret) |
| 127 | goto error_put_platform_device; |
| 128 | ret = gpio_request(SG2_S0_POWER_CTL, "SG2 CF power ctl"); |
| 129 | if (ret) |
| 130 | goto error_free_gpio_buff_ctl; |
| 131 | ret = gpio_request(SG2_S0_GPIO_RESET, "SG2 CF reset"); |
| 132 | if (ret) |
| 133 | goto error_free_gpio_power_ctl; |
| 134 | /* Set gpio directions */ |
| 135 | gpio_direction_output(SG2_S0_BUFF_CTL, 0); |
| 136 | gpio_direction_output(SG2_S0_POWER_CTL, 1); |
| 137 | gpio_direction_output(SG2_S0_GPIO_RESET, 1); |
| 138 | |
| 139 | ret = platform_device_add_data(sg2_pcmcia_device, |
| 140 | &sg2_pcmcia_ops, |
| 141 | sizeof(sg2_pcmcia_ops)); |
| 142 | if (ret) |
| 143 | goto error_free_gpio_reset; |
| 144 | |
| 145 | ret = platform_device_add(sg2_pcmcia_device); |
| 146 | if (ret) |
| 147 | goto error_free_gpio_reset; |
| 148 | |
| 149 | return 0; |
| 150 | error_free_gpio_reset: |
| 151 | gpio_free(SG2_S0_GPIO_RESET); |
| 152 | error_free_gpio_power_ctl: |
| 153 | gpio_free(SG2_S0_POWER_CTL); |
| 154 | error_free_gpio_buff_ctl: |
| 155 | gpio_free(SG2_S0_BUFF_CTL); |
| 156 | error_put_platform_device: |
| 157 | platform_device_put(sg2_pcmcia_device); |
| 158 | |
| 159 | return ret; |
| 160 | } |
| 161 | |
| 162 | static void __exit sg2_pcmcia_exit(void) |
| 163 | { |
| 164 | platform_device_unregister(sg2_pcmcia_device); |
| 165 | gpio_free(SG2_S0_BUFF_CTL); |
| 166 | gpio_free(SG2_S0_POWER_CTL); |
| 167 | gpio_free(SG2_S0_GPIO_RESET); |
| 168 | } |
| 169 | |
| 170 | fs_initcall(sg2_pcmcia_init); |
| 171 | module_exit(sg2_pcmcia_exit); |
| 172 | |
| 173 | MODULE_LICENSE("GPL"); |
| 174 | MODULE_ALIAS("platform:pxa2xx-pcmcia"); |