Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / ba2d3587912f82d1ab4367975b1df460db60fb1e / . / drivers / net / wan / hd64570.h
blob: e4f539ad071b7cb75d55ba9b8d27107ce9b52a61 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]1#ifndef __HD64570_H
2#define __HD64570_H
3
4/* SCA HD64570 register definitions - all addresses for mode 0 (8086 MPU)
5 and 1 (64180 MPU). For modes 2 and 3, XOR the address with 0x01.
6
7 Source: HD64570 SCA User's Manual
8*/
9
10
11
12/* SCA Control Registers */
13#define LPR 0x00 /* Low Power */
14
15/* Wait controller registers */
16#define PABR0 0x02 /* Physical Address Boundary 0 */
17#define PABR1 0x03 /* Physical Address Boundary 1 */
18#define WCRL 0x04 /* Wait Control L */
19#define WCRM 0x05 /* Wait Control M */
20#define WCRH 0x06 /* Wait Control H */
21
22#define PCR 0x08 /* DMA Priority Control */
23#define DMER 0x09 /* DMA Master Enable */
24
25
26/* Interrupt registers */
27#define ISR0 0x10 /* Interrupt Status 0 */
28#define ISR1 0x11 /* Interrupt Status 1 */
29#define ISR2 0x12 /* Interrupt Status 2 */
30
31#define IER0 0x14 /* Interrupt Enable 0 */
32#define IER1 0x15 /* Interrupt Enable 1 */
33#define IER2 0x16 /* Interrupt Enable 2 */
34
35#define ITCR 0x18 /* Interrupt Control */
36#define IVR 0x1A /* Interrupt Vector */
37#define IMVR 0x1C /* Interrupt Modified Vector */
38
39
40
41/* MSCI channel (port) 0 registers - offset 0x20
42 MSCI channel (port) 1 registers - offset 0x40 */
43
44#define MSCI0_OFFSET 0x20
45#define MSCI1_OFFSET 0x40
46
47#define TRBL 0x00 /* TX/RX buffer L */
48#define TRBH 0x01 /* TX/RX buffer H */
49#define ST0 0x02 /* Status 0 */
50#define ST1 0x03 /* Status 1 */
51#define ST2 0x04 /* Status 2 */
52#define ST3 0x05 /* Status 3 */
53#define FST 0x06 /* Frame Status */
54#define IE0 0x08 /* Interrupt Enable 0 */
55#define IE1 0x09 /* Interrupt Enable 1 */
56#define IE2 0x0A /* Interrupt Enable 2 */
57#define FIE 0x0B /* Frame Interrupt Enable */
58#define CMD 0x0C /* Command */
59#define MD0 0x0E /* Mode 0 */
60#define MD1 0x0F /* Mode 1 */
61#define MD2 0x10 /* Mode 2 */
62#define CTL 0x11 /* Control */
63#define SA0 0x12 /* Sync/Address 0 */
64#define SA1 0x13 /* Sync/Address 1 */
65#define IDL 0x14 /* Idle Pattern */
66#define TMC 0x15 /* Time Constant */
67#define RXS 0x16 /* RX Clock Source */
68#define TXS 0x17 /* TX Clock Source */
69#define TRC0 0x18 /* TX Ready Control 0 */
70#define TRC1 0x19 /* TX Ready Control 1 */
71#define RRC 0x1A /* RX Ready Control */
72#define CST0 0x1C /* Current Status 0 */
73#define CST1 0x1D /* Current Status 1 */
74
75
76/* Timer channel 0 (port 0 RX) registers - offset 0x60
77 Timer channel 1 (port 0 TX) registers - offset 0x68
78 Timer channel 2 (port 1 RX) registers - offset 0x70
79 Timer channel 3 (port 1 TX) registers - offset 0x78
80*/
81
82#define TIMER0RX_OFFSET 0x60
83#define TIMER0TX_OFFSET 0x68
84#define TIMER1RX_OFFSET 0x70
85#define TIMER1TX_OFFSET 0x78
86
87#define TCNTL 0x00 /* Up-counter L */
88#define TCNTH 0x01 /* Up-counter H */
89#define TCONRL 0x02 /* Constant L */
90#define TCONRH 0x03 /* Constant H */
91#define TCSR 0x04 /* Control/Status */
92#define TEPR 0x05 /* Expand Prescale */
93
94
95
96/* DMA channel 0 (port 0 RX) registers - offset 0x80
97 DMA channel 1 (port 0 TX) registers - offset 0xA0
98 DMA channel 2 (port 1 RX) registers - offset 0xC0
99 DMA channel 3 (port 1 TX) registers - offset 0xE0
100*/
101
102#define DMAC0RX_OFFSET 0x80
103#define DMAC0TX_OFFSET 0xA0
104#define DMAC1RX_OFFSET 0xC0
105#define DMAC1TX_OFFSET 0xE0
106
107#define BARL 0x00 /* Buffer Address L (chained block) */
108#define BARH 0x01 /* Buffer Address H (chained block) */
109#define BARB 0x02 /* Buffer Address B (chained block) */
110
111#define DARL 0x00 /* RX Destination Addr L (single block) */
112#define DARH 0x01 /* RX Destination Addr H (single block) */
113#define DARB 0x02 /* RX Destination Addr B (single block) */
114
115#define SARL 0x04 /* TX Source Address L (single block) */
116#define SARH 0x05 /* TX Source Address H (single block) */
117#define SARB 0x06 /* TX Source Address B (single block) */
118
119#define CPB 0x06 /* Chain Pointer Base (chained block) */
120
121#define CDAL 0x08 /* Current Descriptor Addr L (chained block) */
122#define CDAH 0x09 /* Current Descriptor Addr H (chained block) */
123#define EDAL 0x0A /* Error Descriptor Addr L (chained block) */
124#define EDAH 0x0B /* Error Descriptor Addr H (chained block) */
125#define BFLL 0x0C /* RX Receive Buffer Length L (chained block)*/
126#define BFLH 0x0D /* RX Receive Buffer Length H (chained block)*/
127#define BCRL 0x0E /* Byte Count L */
128#define BCRH 0x0F /* Byte Count H */
129#define DSR 0x10 /* DMA Status */
130#define DSR_RX(node) (DSR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
131#define DSR_TX(node) (DSR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
132#define DMR 0x11 /* DMA Mode */
133#define DMR_RX(node) (DMR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
134#define DMR_TX(node) (DMR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
135#define FCT 0x13 /* Frame End Interrupt Counter */
136#define FCT_RX(node) (FCT + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
137#define FCT_TX(node) (FCT + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
138#define DIR 0x14 /* DMA Interrupt Enable */
139#define DIR_RX(node) (DIR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
140#define DIR_TX(node) (DIR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
141#define DCR 0x15 /* DMA Command */
142#define DCR_RX(node) (DCR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET))
143#define DCR_TX(node) (DCR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET))
144
145
146
147
148/* Descriptor Structure */
149
150typedef struct {
151 u16 cp; /* Chain Pointer */
152 u32 bp; /* Buffer Pointer (24 bits) */
153 u16 len; /* Data Length */
154 u8 stat; /* Status */
155 u8 unused; /* pads to 2-byte boundary */
Eric Dumazetba2d3582010-06-02 18:10:09 +0000[diff] [blame^]156}__packed pkt_desc;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]157
158
159/* Packet Descriptor Status bits */
160
161#define ST_TX_EOM 0x80 /* End of frame */
162#define ST_TX_EOT 0x01 /* End of transmition */
163
164#define ST_RX_EOM 0x80 /* End of frame */
165#define ST_RX_SHORT 0x40 /* Short frame */
166#define ST_RX_ABORT 0x20 /* Abort */
167#define ST_RX_RESBIT 0x10 /* Residual bit */
168#define ST_RX_OVERRUN 0x08 /* Overrun */
169#define ST_RX_CRC 0x04 /* CRC */
170
171#define ST_ERROR_MASK 0x7C
172
173#define DIR_EOTE 0x80 /* Transfer completed */
174#define DIR_EOME 0x40 /* Frame Transfer Completed (chained-block) */
175#define DIR_BOFE 0x20 /* Buffer Overflow/Underflow (chained-block)*/
176#define DIR_COFE 0x10 /* Counter Overflow (chained-block) */
177
178
179#define DSR_EOT 0x80 /* Transfer completed */
180#define DSR_EOM 0x40 /* Frame Transfer Completed (chained-block) */
181#define DSR_BOF 0x20 /* Buffer Overflow/Underflow (chained-block)*/
182#define DSR_COF 0x10 /* Counter Overflow (chained-block) */
183#define DSR_DE 0x02 /* DMA Enable */
184#define DSR_DWE 0x01 /* DMA Write Disable */
185
186/* DMA Master Enable Register (DMER) bits */
187#define DMER_DME 0x80 /* DMA Master Enable */
188
189
190#define CMD_RESET 0x21 /* Reset Channel */
191#define CMD_TX_ENABLE 0x02 /* Start transmitter */
192#define CMD_RX_ENABLE 0x12 /* Start receiver */
193
194#define MD0_HDLC 0x80 /* Bit-sync HDLC mode */
195#define MD0_CRC_ENA 0x04 /* Enable CRC code calculation */
196#define MD0_CRC_CCITT 0x02 /* CCITT CRC instead of CRC-16 */
197#define MD0_CRC_PR1 0x01 /* Initial all-ones instead of all-zeros */
198
199#define MD0_CRC_NONE 0x00
200#define MD0_CRC_16_0 0x04
201#define MD0_CRC_16 0x05
202#define MD0_CRC_ITU_0 0x06
203#define MD0_CRC_ITU 0x07
204
205#define MD2_NRZ 0x00
206#define MD2_NRZI 0x20
207#define MD2_MANCHESTER 0x80
208#define MD2_FM_MARK 0xA0
209#define MD2_FM_SPACE 0xC0
210#define MD2_LOOPBACK 0x03 /* Local data Loopback */
211
212#define CTL_NORTS 0x01
213#define CTL_IDLE 0x10 /* Transmit an idle pattern */
214#define CTL_UDRNC 0x20 /* Idle after CRC or FCS+flag transmition */
215
216#define ST0_TXRDY 0x02 /* TX ready */
217#define ST0_RXRDY 0x01 /* RX ready */
218
219#define ST1_UDRN 0x80 /* MSCI TX underrun */
220#define ST1_CDCD 0x04 /* DCD level changed */
221
222#define ST3_CTS 0x08 /* modem input - /CTS */
223#define ST3_DCD 0x04 /* modem input - /DCD */
224
225#define IE0_TXINT 0x80 /* TX INT MSCI interrupt enable */
226#define IE0_RXINTA 0x40 /* RX INT A MSCI interrupt enable */
227#define IE1_UDRN 0x80 /* TX underrun MSCI interrupt enable */
228#define IE1_CDCD 0x04 /* DCD level changed */
229
230#define DCR_ABORT 0x01 /* Software abort command */
231#define DCR_CLEAR_EOF 0x02 /* Clear EOF interrupt */
232
233/* TX and RX Clock Source - RXS and TXS */
234#define CLK_BRG_MASK 0x0F
235#define CLK_LINE_RX 0x00 /* TX/RX clock line input */
236#define CLK_LINE_TX 0x00 /* TX/RX line input */
237#define CLK_BRG_RX 0x40 /* internal baud rate generator */
238#define CLK_BRG_TX 0x40 /* internal baud rate generator */
239#define CLK_RXCLK_TX 0x60 /* TX clock from RX clock */
240
241#endif