blob: 95754e2f71b8c680173bb5f33773f5eb1a7b2028 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001# drivers/sound/Config.in
2#
3# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
4# More hacking for modularisation.
5#
6# Prompt user for primary drivers.
Adrian Bunkcecd1ca2005-11-08 21:34:45 -08007
Linus Torvalds1da177e2005-04-16 15:20:36 -07008config SOUND_BT878
9 tristate "BT878 audio dma"
Adrian Bunkaafda4e2006-04-20 02:43:21 -070010 depends on SOUND_PRIME && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -070011 ---help---
12 Audio DMA support for bt878 based grabber boards. As you might have
13 already noticed, bt878 is listed with two functions in /proc/pci.
14 Function 0 does the video stuff (bt848 compatible), function 1 does
15 the same for audio data. This is a driver for the audio part of
16 the chip. If you say 'Y' here you get a oss-compatible dsp device
17 where you can record from. If you want just watch TV you probably
18 don't need this driver as most TV cards handle sound with a short
19 cable from the TV card to your sound card's line-in.
20
21 To compile this driver as a module, choose M here: the module will
22 be called btaudio.
23
Linus Torvalds1da177e2005-04-16 15:20:36 -070024config SOUND_EMU10K1
25 tristate "Creative SBLive! (EMU10K1)"
Adrian Bunkaafda4e2006-04-20 02:43:21 -070026 depends on SOUND_PRIME && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -070027 ---help---
28 Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
29 such as the Creative SBLive!, SB PCI512 or Emu-APS.
30
31 For more information on this driver and the degree of support for
32 the different card models please check:
33
34 <http://sourceforge.net/projects/emu10k1/>
35
36 It is now possible to load dsp microcode patches into the EMU10K1
37 chip. These patches are used to implement real time sound
38 processing effects which include for example: signal routing,
39 bass/treble control, AC3 passthrough, ...
40 Userspace tools to create new patches and load/unload them can be
41 found in the emu-tools package at the above URL.
42
43config MIDI_EMU10K1
44 bool "Creative SBLive! MIDI (EXPERIMENTAL)"
Al Viro276bd312005-08-23 22:45:06 +010045 depends on SOUND_EMU10K1 && EXPERIMENTAL && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -070046 help
47 Say Y if you want to be able to use the OSS /dev/sequencer
48 interface. This code is still experimental.
49
50config SOUND_FUSION
51 tristate "Crystal SoundFusion (CS4280/461x)"
Al Viro0e6d0d82005-08-23 22:48:02 +010052 depends on SOUND_PRIME && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -070053 help
54 This module drives the Crystal SoundFusion devices (CS4280/46xx
55 series) when wired as native sound drivers with AC97 codecs. If
56 this driver does not work try the CS4232 driver.
57
Linus Torvalds1da177e2005-04-16 15:20:36 -070058config SOUND_BCM_CS4297A
59 tristate "Crystal Sound CS4297a (for Swarm)"
Adrian Bunkb6260cd2005-06-25 14:59:11 -070060 depends on SOUND_PRIME && SIBYTE_SWARM
Linus Torvalds1da177e2005-04-16 15:20:36 -070061 help
62 The BCM91250A has a Crystal CS4297a on synchronous serial
63 port B (in addition to the DB-9 serial port). Say Y or M
64 here to enable the sound chip instead of the UART. Also
65 note that CONFIG_KGDB should not be enabled at the same
66 time, since it also attempts to use this UART port.
67
Linus Torvalds1da177e2005-04-16 15:20:36 -070068config SOUND_ES1371
69 tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
Adrian Bunkaafda4e2006-04-20 02:43:21 -070070 depends on SOUND_PRIME && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -070071 help
72 Say Y or M if you have a PCI sound card utilizing the Ensoniq
73 ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
74 your sound card uses an ES1371 without removing your computer's
75 cover, use lspci -n and look for the PCI ID 1274:1371. Since
76 Ensoniq was bought by Creative Labs, Sound Blaster 64/PCI
77 models are either ES1370 or ES1371 based. This driver differs
78 slightly from OSS/Free, so PLEASE READ
79 <file:Documentation/sound/oss/es1371>.
80
Linus Torvalds1da177e2005-04-16 15:20:36 -070081config SOUND_ICH
82 tristate "Intel ICH (i8xx) audio support"
Adrian Bunkb6260cd2005-06-25 14:59:11 -070083 depends on SOUND_PRIME && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -070084 help
85 Support for integral audio in Intel's I/O Controller Hub (ICH)
86 chipset, as used on the 810/820/840 motherboards.
87
Linus Torvalds1da177e2005-04-16 15:20:36 -070088config SOUND_VWSND
89 tristate "SGI Visual Workstation Sound"
Adrian Bunkb6260cd2005-06-25 14:59:11 -070090 depends on SOUND_PRIME && X86_VISWS
Linus Torvalds1da177e2005-04-16 15:20:36 -070091 help
92 Say Y or M if you have an SGI Visual Workstation and you want to be
93 able to use its on-board audio. Read
94 <file:Documentation/sound/oss/vwsnd> for more info on this driver's
95 capabilities.
96
97config SOUND_HAL2
98 tristate "SGI HAL2 sound (EXPERIMENTAL)"
Adrian Bunkb6260cd2005-06-25 14:59:11 -070099 depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100 help
Kumbab97b36b2006-06-18 02:17:08 -0400101 Say Y or M if you have an SGI Indy or Indigo2 system and want to be able to
102 use its on-board A2 audio system.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103
104config SOUND_IT8172
105 tristate "IT8172G Sound"
Adrian Bunkb6260cd2005-06-25 14:59:11 -0700106 depends on SOUND_PRIME && (MIPS_ITE8172 || MIPS_IVR)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700107
108config SOUND_VRC5477
109 tristate "NEC Vrc5477 AC97 sound"
Adrian Bunkb6260cd2005-06-25 14:59:11 -0700110 depends on SOUND_PRIME && DDB5477
Linus Torvalds1da177e2005-04-16 15:20:36 -0700111 help
112 Say Y here to enable sound support for the NEC Vrc5477 chip, an
113 integrated, multi-function controller chip for MIPS CPUs. Works
114 with the AC97 codec.
115
Linus Torvalds1da177e2005-04-16 15:20:36 -0700116config SOUND_AU1550_AC97
Domen Puncerbb12b762006-06-25 05:49:29 -0700117 tristate "Au1550/Au1200 AC97 Sound"
118 select SND_AC97_CODEC
119 depends on SOUND_PRIME && (SOC_AU1550 || SOC_AU1200)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700120
121config SOUND_TRIDENT
122 tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
Al Viro0e6d0d82005-08-23 22:48:02 +0100123 depends on SOUND_PRIME && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700124 ---help---
125 Say Y or M if you have a PCI sound card utilizing the Trident
126 4DWave-DX/NX chipset or your mother board chipset has SiS 7018
127 or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded
128 in SiS960 Super South Bridge and SiS540/630 Single Chipset.
129 The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D,
130 M1535+ or M1535D+ South Bridge.
131
132 Use lspci -n to find out if your sound card or chipset uses
133 Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands
134 for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID
135 10B9:5451 stands for ALi5451.
136
137 This driver supports S/PDIF in/out (record/playback) for ALi 5451
138 embedded in ALi M1535+ and M1535D+. Note that they aren't all
139 enabled by default; you can enable them by saying Y to "/proc file
140 system support" and "Sysctl support", and after the /proc file
141 system has been mounted, executing the command
142
143 command what is enabled
144
145 echo 0>/proc/ALi5451 pcm out is also set to S/PDIF out. (Default).
146
147 echo 1>/proc/ALi5451 use S/PDIF out to output pcm data.
148
149 echo 2>/proc/ALi5451 use S/PDIF out to output non-pcm data.
150 (AC3...).
151
152 echo 3>/proc/ALi5451 record from Ac97 in(MIC, Line in...).
153 (Default).
154
155 echo 4>/proc/ALi5451 no matter Ac97 settings, record from S/PDIF
156 in.
157
158
159 This driver differs slightly from OSS/Free, so PLEASE READ the
160 comments at the top of <file:drivers/sound/trident.c>.
161
162config SOUND_MSNDCLAS
163 tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
Adrian Bunkb6260cd2005-06-25 14:59:11 -0700164 depends on SOUND_PRIME && (m || !STANDALONE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700165 help
166 Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
167 Monterey (not for the Pinnacle or Fiji).
168
169 See <file:Documentation/sound/oss/MultiSound> for important information
170 about this driver. Note that it has been discontinued, but the
171 Voyetra Turtle Beach knowledge base entry for it is still available
172 at <http://www.turtlebeach.com/site/kb_ftp/790.asp>.
173
174comment "Compiled-in MSND Classic support requires firmware during compilation."
175 depends on SOUND_PRIME && SOUND_MSNDCLAS=y
176
177config MSNDCLAS_HAVE_BOOT
178 bool
179 depends on SOUND_MSNDCLAS=y && !STANDALONE
180 default y
181
182config MSNDCLAS_INIT_FILE
183 string "Full pathname of MSNDINIT.BIN firmware file"
184 depends on SOUND_MSNDCLAS
185 default "/etc/sound/msndinit.bin"
186 help
187 The MultiSound cards have two firmware files which are required for
188 operation, and are not currently included. These files can be
189 obtained from Turtle Beach. See
190 <file:Documentation/sound/oss/MultiSound> for information on how to
191 obtain this.
192
193config MSNDCLAS_PERM_FILE
194 string "Full pathname of MSNDPERM.BIN firmware file"
195 depends on SOUND_MSNDCLAS
196 default "/etc/sound/msndperm.bin"
197 help
198 The MultiSound cards have two firmware files which are required for
199 operation, and are not currently included. These files can be
200 obtained from Turtle Beach. See
201 <file:Documentation/sound/oss/MultiSound> for information on how to
202 obtain this.
203
204config MSNDCLAS_IRQ
205 int "MSND Classic IRQ 5, 7, 9, 10, 11, 12"
206 depends on SOUND_MSNDCLAS=y
207 default "5"
208 help
209 Interrupt Request line for the MultiSound Classic and related cards.
210
211config MSNDCLAS_MEM
212 hex "MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000"
213 depends on SOUND_MSNDCLAS=y
214 default "D0000"
215 help
216 Memory-mapped I/O base address for the MultiSound Classic and
217 related cards.
218
219config MSNDCLAS_IO
220 hex "MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
221 depends on SOUND_MSNDCLAS=y
222 default "290"
223 help
224 I/O port address for the MultiSound Classic and related cards.
225
226config SOUND_MSNDPIN
227 tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
Adrian Bunkb6260cd2005-06-25 14:59:11 -0700228 depends on SOUND_PRIME && (m || !STANDALONE)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700229 help
230 Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
231 See <file:Documentation/sound/oss/MultiSound> for important information
232 about this driver. Note that it has been discontinued, but the
233 Voyetra Turtle Beach knowledge base entry for it is still available
234 at <http://www.turtlebeach.com/site/kb_ftp/600.asp>.
235
236comment "Compiled-in MSND Pinnacle support requires firmware during compilation."
237 depends on SOUND_PRIME && SOUND_MSNDPIN=y
238
239config MSNDPIN_HAVE_BOOT
240 bool
241 depends on SOUND_MSNDPIN=y
242 default y
243
244config MSNDPIN_INIT_FILE
245 string "Full pathname of PNDSPINI.BIN firmware file"
246 depends on SOUND_MSNDPIN
247 default "/etc/sound/pndspini.bin"
248 help
249 The MultiSound cards have two firmware files which are required
250 for operation, and are not currently included. These files can be
251 obtained from Turtle Beach. See
252 <file:Documentation/sound/oss/MultiSound> for information on how to
253 obtain this.
254
255config MSNDPIN_PERM_FILE
256 string "Full pathname of PNDSPERM.BIN firmware file"
257 depends on SOUND_MSNDPIN
258 default "/etc/sound/pndsperm.bin"
259 help
260 The MultiSound cards have two firmware files which are required for
261 operation, and are not currently included. These files can be
262 obtained from Turtle Beach. See
263 <file:Documentation/sound/oss/MultiSound> for information on how to
264 obtain this.
265
266config MSNDPIN_IRQ
267 int "MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12"
268 depends on SOUND_MSNDPIN=y
269 default "5"
270 help
271 Interrupt request line for the primary synthesizer on MultiSound
272 Pinnacle and Fiji sound cards.
273
274config MSNDPIN_MEM
275 hex "MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000"
276 depends on SOUND_MSNDPIN=y
277 default "D0000"
278 help
279 Memory-mapped I/O base address for the primary synthesizer on
280 MultiSound Pinnacle and Fiji sound cards.
281
282config MSNDPIN_IO
283 hex "MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
284 depends on SOUND_MSNDPIN=y
285 default "290"
286 help
287 Memory-mapped I/O base address for the primary synthesizer on
288 MultiSound Pinnacle and Fiji sound cards.
289
290config MSNDPIN_DIGITAL
291 bool "MSND Pinnacle has S/PDIF I/O"
292 depends on SOUND_MSNDPIN=y
293 help
294 If you have the S/PDIF daughter board for the Pinnacle or Fiji,
295 answer Y here; otherwise, say N. If you have this, you will be able
296 to play and record from the S/PDIF port (digital signal). See
297 <file:Documentation/sound/oss/MultiSound> for information on how to make
298 use of this capability.
299
300config MSNDPIN_NONPNP
301 bool "MSND Pinnacle non-PnP Mode"
302 depends on SOUND_MSNDPIN=y
303 help
304 The Pinnacle and Fiji card resources can be configured either with
305 PnP, or through a configuration port. Say Y here if your card is NOT
306 in PnP mode. For the Pinnacle, configuration in non-PnP mode allows
307 use of the IDE and joystick peripherals on the card as well; these
308 do not show up when the card is in PnP mode. Specifying zero for any
309 resource of a device will disable the device. If you are running the
310 card in PnP mode, you must say N here and use isapnptools to
311 configure the card's resources.
312
313comment "MSND Pinnacle DSP section will be configured to above parameters."
314 depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
315
316config MSNDPIN_CFG
317 hex "MSND Pinnacle config port 250,260,270"
318 depends on MSNDPIN_NONPNP
319 default "250"
320 help
321 This is the port which the Pinnacle and Fiji uses to configure the
322 card's resources when not in PnP mode. If your card is in PnP mode,
323 then be sure to say N to the previous option, "MSND Pinnacle Non-PnP
324 Mode".
325
326comment "Pinnacle-specific Device Configuration (0 disables)"
327 depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
328
329config MSNDPIN_MPU_IO
330 hex "MSND Pinnacle MPU I/O (e.g. 330)"
331 depends on MSNDPIN_NONPNP
332 default "0"
333 help
334 Memory-mapped I/O base address for the Kurzweil daughterboard
335 synthesizer on MultiSound Pinnacle and Fiji sound cards.
336
337config MSNDPIN_MPU_IRQ
338 int "MSND Pinnacle MPU IRQ (e.g. 9)"
339 depends on MSNDPIN_NONPNP
340 default "0"
341 help
342 Interrupt request number for the Kurzweil daughterboard
343 synthesizer on MultiSound Pinnacle and Fiji sound cards.
344
345config MSNDPIN_IDE_IO0
346 hex "MSND Pinnacle IDE I/O 0 (e.g. 170)"
347 depends on MSNDPIN_NONPNP
348 default "0"
349 help
350 CD-ROM drive 0 memory-mapped I/O base address for the MultiSound
351 Pinnacle and Fiji sound cards.
352
353config MSNDPIN_IDE_IO1
354 hex "MSND Pinnacle IDE I/O 1 (e.g. 376)"
355 depends on MSNDPIN_NONPNP
356 default "0"
357 help
358 CD-ROM drive 1 memory-mapped I/O base address for the MultiSound
359 Pinnacle and Fiji sound cards.
360
361config MSNDPIN_IDE_IRQ
362 int "MSND Pinnacle IDE IRQ (e.g. 15)"
363 depends on MSNDPIN_NONPNP
364 default "0"
365 help
366 Interrupt request number for the IDE CD-ROM interface on the
367 MultiSound Pinnacle and Fiji sound cards.
368
369config MSNDPIN_JOYSTICK_IO
370 hex "MSND Pinnacle joystick I/O (e.g. 200)"
371 depends on MSNDPIN_NONPNP
372 default "0"
373 help
374 Memory-mapped I/O base address for the joystick port on MultiSound
375 Pinnacle and Fiji sound cards.
376
377config MSND_FIFOSIZE
378 int "MSND buffer size (kB)"
379 depends on SOUND_PRIME && (SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y)
380 default "128"
381 help
382 Configures the size of each audio buffer, in kilobytes, for
383 recording and playing in the MultiSound drivers (both the Classic
384 and Pinnacle). Larger values reduce the chance of data overruns at
385 the expense of overall latency. If unsure, use the default.
386
Adrian Bunk46539262006-04-20 02:43:22 -0700387config SOUND_VIA82CXXX
388 tristate "VIA 82C686 Audio Codec"
389 depends on SOUND_PRIME && PCI
390 help
391 Say Y here to include support for the audio codec found on VIA
392 82Cxxx-based chips. Typically these are built into a motherboard.
393
394 DO NOT select Sound Blaster or Adlib with this driver, unless
395 you have a Sound Blaster or Adlib card in addition to your VIA
396 audio chip.
397
398config MIDI_VIA82CXXX
399 bool "VIA 82C686 MIDI"
400 depends on SOUND_VIA82CXXX && ISA_DMA_API
401 help
402 Answer Y to use the MIDI interface of the Via686. You may need to
403 enable this in the BIOS before it will work. This is for connection
404 to external MIDI hardware, and is not required for software playback
405 of MIDI files.
406
Linus Torvalds1da177e2005-04-16 15:20:36 -0700407config SOUND_OSS
408 tristate "OSS sound modules"
Al Viro276bd312005-08-23 22:45:06 +0100409 depends on SOUND_PRIME && ISA_DMA_API
Linus Torvalds1da177e2005-04-16 15:20:36 -0700410 help
411 OSS is the Open Sound System suite of sound card drivers. They make
412 sound programming easier since they provide a common API. Say Y or
413 M here (the module will be called sound) if you haven't found a
414 driver for your sound card above, then pick your driver from the
415 list below.
416
417config SOUND_TRACEINIT
418 bool "Verbose initialisation"
419 depends on SOUND_OSS
420 help
421 Verbose soundcard initialization -- affects the format of autoprobe
422 and initialization messages at boot time.
423
424config SOUND_DMAP
425 bool "Persistent DMA buffers"
426 depends on SOUND_OSS
427 ---help---
428 Linux can often have problems allocating DMA buffers for ISA sound
429 cards on machines with more than 16MB of RAM. This is because ISA
430 DMA buffers must exist below the 16MB boundary and it is quite
431 possible that a large enough free block in this region cannot be
432 found after the machine has been running for a while. If you say Y
433 here the DMA buffers (64Kb) will be allocated at boot time and kept
434 until the shutdown. This option is only useful if you said Y to
435 "OSS sound modules", above. If you said M to "OSS sound modules"
436 then you can get the persistent DMA buffer functionality by passing
437 the command-line argument "dmabuf=1" to the sound module.
438
439 Say Y unless you have 16MB or more RAM or a PCI sound card.
440
441config SOUND_AD1816
442 tristate "AD1816(A) based cards (EXPERIMENTAL)"
443 depends on EXPERIMENTAL && SOUND_OSS
444 help
445 Say M here if you have a sound card based on the Analog Devices
446 AD1816(A) chip.
447
448 If you compile the driver into the kernel, you have to add
449 "ad1816=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
450
451config SOUND_AD1889
452 tristate "AD1889 based cards (AD1819 codec) (EXPERIMENTAL)"
Adrian Bunk5b45c3b2005-04-16 15:25:59 -0700453 depends on EXPERIMENTAL && SOUND_OSS && PCI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700454 help
455 Say M here if you have a sound card based on the Analog Devices
456 AD1889 chip.
457
Linus Torvalds1da177e2005-04-16 15:20:36 -0700458config SOUND_ADLIB
459 tristate "Adlib Cards"
460 depends on SOUND_OSS
461 help
462 Includes ASB 64 4D. Information on programming AdLib cards is
463 available at <http://www.itsnet.com/home/ldragon/Specs/adlib.html>.
464
465config SOUND_ACI_MIXER
466 tristate "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20)"
467 depends on SOUND_OSS
468 ---help---
469 ACI (Audio Command Interface) is a protocol used to communicate with
470 the microcontroller on some sound cards produced by miro and
471 Cardinal Technologies. The main function of the ACI is to control
472 the mixer and to get a product identification.
473
474 This VoxWare ACI driver currently supports the ACI functions on the
475 miroSOUND PCM1-pro, PCM12 and PCM20 radio. On the PCM20 radio, ACI
476 also controls the radio tuner. This is supported in the video4linux
477 miropcm20 driver (say M or Y here and go back to "Multimedia
478 devices" -> "Radio Adapters").
479
480 This driver is also available as a module and will be called aci.
481
Adrian Bunk1d3d1d32006-04-27 18:39:21 -0700482config SOUND_CS4232
483 tristate "Crystal CS4232 based (PnP) cards"
484 depends on SOUND_OSS
485 help
486 Say Y here if you have a card based on the Crystal CS4232 chip set,
487 which uses its own Plug and Play protocol.
488
489 If you compile the driver into the kernel, you have to add
490 "cs4232=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
491 command line.
492
493 See <file:Documentation/sound/oss/CS4232> for more information on
494 configuring this card.
495
Linus Torvalds1da177e2005-04-16 15:20:36 -0700496config SOUND_VMIDI
497 tristate "Loopback MIDI device support"
498 depends on SOUND_OSS
499 help
500 Support for MIDI loopback on port 1 or 2.
501
502config SOUND_TRIX
503 tristate "MediaTrix AudioTrix Pro support"
504 depends on SOUND_OSS
505 help
506 Answer Y if you have the AudioTriX Pro sound card manufactured
507 by MediaTrix.
508
509config TRIX_HAVE_BOOT
510 bool "Have TRXPRO.HEX firmware file"
511 depends on SOUND_TRIX=y && !STANDALONE
512 help
513 The MediaTrix AudioTrix Pro has an on-board microcontroller which
514 needs to be initialized by downloading the code from the file
515 TRXPRO.HEX in the DOS driver directory. If you don't have the
516 TRXPRO.HEX file handy you may skip this step. However, the SB and
517 MPU-401 modes of AudioTrix Pro will not work without this file!
518
519config TRIX_BOOT_FILE
520 string "Full pathname of TRXPRO.HEX firmware file"
521 depends on TRIX_HAVE_BOOT
522 default "/etc/sound/trxpro.hex"
523 help
524 Enter the full pathname of your TRXPRO.HEX file, starting from /.
525
526config SOUND_MSS
527 tristate "Microsoft Sound System support"
528 depends on SOUND_OSS
529 ---help---
530 Again think carefully before answering Y to this question. It's
531 safe to answer Y if you have the original Windows Sound System card
532 made by Microsoft or Aztech SG 16 Pro (or NX16 Pro). Also you may
533 say Y in case your card is NOT among these:
534
535 ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16,
536 Ensoniq SoundScape (and compatibles made by Reveal and Spea),
537 Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max,
538 Gravis Ultrasound with 16 bit option, Logitech Sound Man 16,
539 Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi
540 82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft
541 Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid
542 SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro
543 Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface,
544 Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound
545 Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M
546 notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM
547 synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface.
548
549 For cards having native support in VoxWare, consult the card
550 specific instructions in <file:Documentation/sound/oss/README.OSS>.
551 Some drivers have their own MSS support and saying Y to this option
552 will cause a conflict.
553
554 If you compile the driver into the kernel, you have to add
555 "ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command
556 line.
557
558config SOUND_MPU401
559 tristate "MPU-401 support (NOT for SB16)"
560 depends on SOUND_OSS
561 ---help---
562 Be careful with this question. The MPU401 interface is supported by
563 all sound cards. However, some natively supported cards have their
564 own driver for MPU401. Enabling this MPU401 option with these cards
565 will cause a conflict. Also, enabling MPU401 on a system that
566 doesn't really have a MPU401 could cause some trouble. If your card
567 was in the list of supported cards, look at the card specific
568 instructions in the <file:Documentation/sound/oss/README.OSS> file. It
569 is safe to answer Y if you have a true MPU401 MIDI interface card.
570
571 If you compile the driver into the kernel, you have to add
572 "mpu401=<io>,<irq>" to the kernel command line.
573
574config SOUND_NM256
575 tristate "NM256AV/NM256ZX audio support"
Adrian Bunkaafda4e2006-04-20 02:43:21 -0700576 depends on SOUND_OSS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700577 help
578 Say M here to include audio support for the NeoMagic 256AV/256ZX
579 chipsets. These are the audio chipsets found in the Sony
580 Z505S/SX/DX, some Sony F-series, and the Dell Latitude CPi and CPt
581 laptops. It includes support for an AC97-compatible mixer and an
582 apparently proprietary sound engine.
583
584 See <file:Documentation/sound/oss/NM256> for further information.
585
Linus Torvalds1da177e2005-04-16 15:20:36 -0700586config SOUND_PAS
587 tristate "ProAudioSpectrum 16 support"
588 depends on SOUND_OSS
589 ---help---
590 Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
591 16 or Logitech SoundMan 16 sound card. Answer N if you have some
592 other card made by Media Vision or Logitech since those are not
593 PAS16 compatible. Please read <file:Documentation/sound/oss/PAS16>.
594 It is not necessary to add Sound Blaster support separately; it
595 is included in PAS support.
596
597 If you compile the driver into the kernel, you have to add
598 "pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2>
599 to the kernel command line.
600
601config PAS_JOYSTICK
602 bool "Enable PAS16 joystick port"
603 depends on SOUND_PAS=y
604 help
605 Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick
606 port.
607
608config SOUND_PSS
609 tristate "PSS (AD1848, ADSP-2115, ESC614) support"
610 depends on SOUND_OSS
611 help
612 Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven
613 ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
614 ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on
615 how to compile it into the kernel or as a module see the file
616 <file:Documentation/sound/oss/PSS>.
617
618 If you compile the driver into the kernel, you have to add
619 "pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel
620 command line.
621
622config PSS_MIXER
623 bool "Enable PSS mixer (Beethoven ADSP-16 and other compatibile)"
624 depends on SOUND_PSS
625 help
626 Answer Y for Beethoven ADSP-16. You may try to say Y also for other
627 cards if they have master volume, bass, treble, and you can't
628 control it under Linux. If you answer N for Beethoven ADSP-16, you
629 can't control master volume, bass, treble and synth volume.
630
631 If you said M to "PSS support" above, you may enable or disable this
632 PSS mixer with the module parameter pss_mixer. For more information
633 see the file <file:Documentation/sound/oss/PSS>.
634
635config PSS_HAVE_BOOT
636 bool "Have DSPxxx.LD firmware file"
637 depends on SOUND_PSS && !STANDALONE
638 help
639 If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y
640 to include this file. Without this file the synth device (OPL) may
641 not work.
642
643config PSS_BOOT_FILE
644 string "Full pathname of DSPxxx.LD firmware file"
645 depends on PSS_HAVE_BOOT
646 default "/etc/sound/dsp001.ld"
647 help
648 Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file,
649 starting from /.
650
651config SOUND_SB
652 tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
653 depends on SOUND_OSS
654 ---help---
655 Answer Y if you have an original Sound Blaster card made by Creative
656 Labs or a 100% hardware compatible clone (like the Thunderboard or
657 SM Games). For an unknown card you may answer Y if the card claims
658 to be Sound Blaster-compatible.
659
660 Please read the file <file:Documentation/sound/oss/Soundblaster>.
661
662 You should also say Y here for cards based on the Avance Logic
663 ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and
664 for cards based on ESS chips (read
665 <file:Documentation/sound/oss/ESS1868> and
666 <file:Documentation/sound/oss/ESS>). If you have an SB AWE 32 or SB AWE
667 64, say Y here and also to "AWE32 synth" below and read
668 <file:Documentation/sound/oss/INSTALL.awe>. If you have an IBM Mwave
669 card, say Y here and read <file:Documentation/sound/oss/mwave>.
670
671 If you compile the driver into the kernel and don't want to use
672 isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel
673 command line.
674
675 You can say M here to compile this driver as a module; the module is
676 called sb.
677
Linus Torvalds1da177e2005-04-16 15:20:36 -0700678config SOUND_YM3812
679 tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
Adrian Bunkaafda4e2006-04-20 02:43:21 -0700680 depends on SOUND_OSS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700681 ---help---
682 Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
683 Answering Y is usually a safe and recommended choice, however some
684 cards may have software (TSR) FM emulation. Enabling FM support with
685 these cards may cause trouble (I don't currently know of any such
686 cards, however). Please read the file
687 <file:Documentation/sound/oss/OPL3> if your card has an OPL3 chip.
688
689 If you compile the driver into the kernel, you have to add
690 "opl3=<io>" to the kernel command line.
691
692 If unsure, say Y.
693
Linus Torvalds1da177e2005-04-16 15:20:36 -0700694config SOUND_OPL3SA2
695 tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
696 depends on SOUND_OSS
697 help
698 Say Y or M if you have a card based on one of these Yamaha sound
699 chipsets or the "SAx", which is actually a SA3. Read
700 <file:Documentation/sound/oss/OPL3-SA2> for more information on
701 configuring these cards.
702
703 If you compile the driver into the kernel and do not also
704 configure in the optional ISA PnP support, you will have to add
705 "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
706 command line.
707
Linus Torvalds1da177e2005-04-16 15:20:36 -0700708config SOUND_UART6850
709 tristate "6850 UART support"
710 depends on SOUND_OSS
711 help
712 This option enables support for MIDI interfaces based on the 6850
713 UART chip. This interface is rarely found on sound cards. It's safe
714 to answer N to this question.
715
716 If you compile the driver into the kernel, you have to add
717 "uart6850=<io>,<irq>" to the kernel command line.
718
719config SOUND_AEDSP16
720 tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)"
721 depends on SOUND_OSS
722 ---help---
723 Answer Y if you have a Gallant's Audio Excel DSP 16 card. This
724 driver supports Audio Excel DSP 16 but not the III nor PnP versions
725 of this card.
726
727 The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or
728 a Microsoft Sound System card, so you should have said Y to either
729 "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
730 or "Microsoft Sound System support", above, and you need to answer
731 the "MSS emulation" and "SBPro emulation" questions below
732 accordingly. You should say Y to one and only one of these two
733 questions.
734
735 Read the <file:Documentation/sound/oss/README.OSS> file and the head of
736 <file:drivers/sound/aedsp16.c> as well as
737 <file:Documentation/sound/oss/AudioExcelDSP16> to get more information
738 about this driver and its configuration.
739
740config SC6600
741 bool "SC-6600 based audio cards (new Audio Excel DSP 16)"
742 depends on SOUND_AEDSP16
743 help
744 The SC6600 is the new version of DSP mounted on the Audio Excel DSP
745 16 cards. Find in the manual the FCC ID of your audio card and
746 answer Y if you have an SC6600 DSP.
747
748config SC6600_JOY
749 bool "Activate SC-6600 Joystick Interface"
750 depends on SC6600
751 help
752 Say Y here in order to use the joystick interface of the Audio Excel
753 DSP 16 card.
754
755config SC6600_CDROM
756 int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)"
757 depends on SC6600
758 default "4"
759 help
760 This is used to activate the CD-ROM interface of the Audio Excel
761 DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no
762 CD-ROM present.
763
764config SC6600_CDROMBASE
765 hex "SC-6600 CDROM Interface I/O Address"
766 depends on SC6600
767 default "0"
768 help
769 Base I/O port address for the CD-ROM interface of the Audio Excel
770 DSP 16 card.
771
772choice
773 prompt "Audio Excel DSP 16"
774 optional
775 depends on SOUND_AEDSP16
776
777config AEDSP16_MSS
778 bool "MSS emulation"
779 depends on SOUND_MSS
780 help
781 Answer Y if you want your audio card to emulate Microsoft Sound
782 System. You should then say Y to "Microsoft Sound System support"
783 and say N to "Audio Excel DSP 16 (SBPro emulation)".
784
785config AEDSP16_SBPRO
786 bool "SBPro emulation"
787 depends on SOUND_SB
788 help
789 Answer Y if you want your audio card to emulate Sound Blaster Pro.
790 You should then say Y to "100% Sound Blaster compatibles
791 (SB16/32/64, ESS, Jazz16) support" and N to "Audio Excel DSP 16 (MSS
792 emulation)".
793
794 If you compile the driver into the kernel, you have to add
795 "aedsp16=<io>,<irq>,<dma>,<mssio>,<mpuio>,<mouirq>" to the kernel
796 command line.
797
798endchoice
799
800config AEDSP16_MPU401
801 bool "Audio Excel DSP 16 (MPU401 emulation)"
802 depends on SOUND_AEDSP16 && SOUND_MPU401
803 help
804 Answer Y if you want your audio card to emulate the MPU-401 midi
805 interface. You should then also say Y to "MPU-401 support".
806
807 Note that the I/O base for MPU-401 support of aedsp16 is the same
808 you have selected for "MPU-401 support". If you are using this
809 driver as a module you have to specify the MPU I/O base address with
810 the parameter 'mpu_base=0xNNN'.
811
812config SOUND_VIDC
813 tristate "VIDC 16-bit sound"
814 depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS
815 help
816 16-bit support for the VIDC onboard sound hardware found on Acorn
817 machines.
818
819config SOUND_WAVEARTIST
820 tristate "Netwinder WaveArtist"
821 depends on ARM && SOUND_OSS && ARCH_NETWINDER
822 help
823 Say Y here to include support for the Rockwell WaveArtist sound
824 system. This driver is mainly for the NetWinder.
825
826config SOUND_TVMIXER
827 tristate "TV card (bt848) mixer support"
Adrian Bunkb6260cd2005-06-25 14:59:11 -0700828 depends on SOUND_PRIME && I2C
Linus Torvalds1da177e2005-04-16 15:20:36 -0700829 help
830 Support for audio mixer facilities on the BT848 TV frame-grabber
831 card.
832
833config SOUND_KAHLUA
834 tristate "XpressAudio Sound Blaster emulation"
835 depends on SOUND_SB
836
Linus Torvalds1da177e2005-04-16 15:20:36 -0700837config SOUND_SH_DAC_AUDIO
838 tristate "SuperH DAC audio support"
Adrian Bunkb6260cd2005-06-25 14:59:11 -0700839 depends on SOUND_PRIME && CPU_SH3
Linus Torvalds1da177e2005-04-16 15:20:36 -0700840
841config SOUND_SH_DAC_AUDIO_CHANNEL
842 int " DAC channel"
843 default "1"
844 depends on SOUND_SH_DAC_AUDIO