drivers/isdn/gigaset/bas-gigaset.c

/*
 * USB driver for Gigaset 307x base via direct USB connection.
 *
 * Copyright (c) 2001 by Hansjoerg Lipp <hjlipp@web.de>,
 *                       Tilman Schmidt <tilman@imap.cc>,
 *                       Stefan Eilers.
 *
 * =====================================================================
 *	This program is free software; you can redistribute it and/or
 *	modify it under the terms of the GNU General Public License as
 *	published by the Free Software Foundation; either version 2 of
 *	the License, or (at your option) any later version.
 * =====================================================================
 */

#include "gigaset.h"
#include <linux/usb.h>
#include <linux/module.h>
#include <linux/moduleparam.h>

/* Version Information */
#define DRIVER_AUTHOR "Tilman Schmidt <tilman@imap.cc>, Hansjoerg Lipp <hjlipp@web.de>, Stefan Eilers"
#define DRIVER_DESC "USB Driver for Gigaset 307x"


/* Module parameters */

static int startmode = SM_ISDN;
static int cidmode = 1;

module_param(startmode, int, S_IRUGO);
module_param(cidmode, int, S_IRUGO);
MODULE_PARM_DESC(startmode, "start in isdn4linux mode");
MODULE_PARM_DESC(cidmode, "Call-ID mode");

#define GIGASET_MINORS     1
#define GIGASET_MINOR      16
#define GIGASET_MODULENAME "bas_gigaset"
#define GIGASET_DEVNAME    "ttyGB"

/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
#define IF_WRITEBUF 264

/* interrupt pipe message size according to ibid. ch. 2.2 */
#define IP_MSGSIZE 3

/* Values for the Gigaset 307x */
#define USB_GIGA_VENDOR_ID      0x0681
#define USB_3070_PRODUCT_ID     0x0001
#define USB_3075_PRODUCT_ID     0x0002
#define USB_SX303_PRODUCT_ID    0x0021
#define USB_SX353_PRODUCT_ID    0x0022

/* table of devices that work with this driver */
static const struct usb_device_id gigaset_table[] = {
	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3070_PRODUCT_ID) },
	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3075_PRODUCT_ID) },
	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) },
	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX353_PRODUCT_ID) },
	{ } /* Terminating entry */
};

MODULE_DEVICE_TABLE(usb, gigaset_table);

/*======================= local function prototypes ==========================*/

/* function called if a new device belonging to this driver is connected */
static int gigaset_probe(struct usb_interface *interface,
			 const struct usb_device_id *id);

/* Function will be called if the device is unplugged */
static void gigaset_disconnect(struct usb_interface *interface);

/* functions called before/after suspend */
static int gigaset_suspend(struct usb_interface *intf, pm_message_t message);
static int gigaset_resume(struct usb_interface *intf);

/* functions called before/after device reset */
static int gigaset_pre_reset(struct usb_interface *intf);
static int gigaset_post_reset(struct usb_interface *intf);

static int atread_submit(struct cardstate *, int);
static void stopurbs(struct bas_bc_state *);
static int req_submit(struct bc_state *, int, int, int);
static int atwrite_submit(struct cardstate *, unsigned char *, int);
static int start_cbsend(struct cardstate *);

/*============================================================================*/

struct bas_cardstate {
	struct usb_device	*udev;		/* USB device pointer */
	struct usb_interface	*interface;	/* interface for this device */
	unsigned char		minor;		/* starting minor number */

	struct urb		*urb_ctrl;	/* control pipe default URB */
	struct usb_ctrlrequest	dr_ctrl;
	struct timer_list	timer_ctrl;	/* control request timeout */
	int			retry_ctrl;

	struct timer_list	timer_atrdy;	/* AT command ready timeout */
	struct urb		*urb_cmd_out;	/* for sending AT commands */
	struct usb_ctrlrequest	dr_cmd_out;
	int			retry_cmd_out;

	struct urb		*urb_cmd_in;	/* for receiving AT replies */
	struct usb_ctrlrequest	dr_cmd_in;
	struct timer_list	timer_cmd_in;	/* receive request timeout */
	unsigned char		*rcvbuf;	/* AT reply receive buffer */

	struct urb		*urb_int_in;	/* URB for interrupt pipe */
	unsigned char		*int_in_buf;
	struct work_struct	int_in_wq;	/* for usb_clear_halt() */
	struct timer_list	timer_int_in;	/* int read retry delay */
	int			retry_int_in;

	spinlock_t		lock;		/* locks all following */
	int			basstate;	/* bitmap (BS_*) */
	int			pending;	/* uncompleted base request */
	wait_queue_head_t	waitqueue;
	int			rcvbuf_size;	/* size of AT receive buffer */
						/* 0: no receive in progress */
	int			retry_cmd_in;	/* receive req retry count */
};

/* status of direct USB connection to 307x base (bits in basstate) */
#define BS_ATOPEN	0x001	/* AT channel open */
#define BS_B1OPEN	0x002	/* B channel 1 open */
#define BS_B2OPEN	0x004	/* B channel 2 open */
#define BS_ATREADY	0x008	/* base ready for AT command */
#define BS_INIT		0x010	/* base has signalled INIT_OK */
#define BS_ATTIMER	0x020	/* waiting for HD_READY_SEND_ATDATA */
#define BS_ATRDPEND	0x040	/* urb_cmd_in in use */
#define BS_ATWRPEND	0x080	/* urb_cmd_out in use */
#define BS_SUSPEND	0x100	/* USB port suspended */
#define BS_RESETTING	0x200	/* waiting for HD_RESET_INTERRUPT_PIPE_ACK */


static struct gigaset_driver *driver;

/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver gigaset_usb_driver = {
	.name =         GIGASET_MODULENAME,
	.probe =        gigaset_probe,
	.disconnect =   gigaset_disconnect,
	.id_table =     gigaset_table,
	.suspend =	gigaset_suspend,
	.resume =	gigaset_resume,
	.reset_resume =	gigaset_post_reset,
	.pre_reset =	gigaset_pre_reset,
	.post_reset =	gigaset_post_reset,
};

/* get message text for usb_submit_urb return code
 */
static char *get_usb_rcmsg(int rc)
{
	static char unkmsg[28];

	switch (rc) {
	case 0:
		return "success";
	case -ENOMEM:
		return "out of memory";
	case -ENODEV:
		return "device not present";
	case -ENOENT:
		return "endpoint not present";
	case -ENXIO:
		return "URB type not supported";
	case -EINVAL:
		return "invalid argument";
	case -EAGAIN:
		return "start frame too early or too much scheduled";
	case -EFBIG:
		return "too many isoc frames requested";
	case -EPIPE:
		return "endpoint stalled";
	case -EMSGSIZE:
		return "invalid packet size";
	case -ENOSPC:
		return "would overcommit USB bandwidth";
	case -ESHUTDOWN:
		return "device shut down";
	case -EPERM:
		return "reject flag set";
	case -EHOSTUNREACH:
		return "device suspended";
	default:
		snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", rc);
		return unkmsg;
	}
}

/* get message text for USB status code
 */
static char *get_usb_statmsg(int status)
{
	static char unkmsg[28];

	switch (status) {
	case 0:
		return "success";
	case -ENOENT:
		return "unlinked (sync)";
	case -EINPROGRESS:
		return "URB still pending";
	case -EPROTO:
		return "bitstuff error, timeout, or unknown USB error";
	case -EILSEQ:
		return "CRC mismatch, timeout, or unknown USB error";
	case -ETIME:
		return "USB response timeout";
	case -EPIPE:
		return "endpoint stalled";
	case -ECOMM:
		return "IN buffer overrun";
	case -ENOSR:
		return "OUT buffer underrun";
	case -EOVERFLOW:
		return "endpoint babble";
	case -EREMOTEIO:
		return "short packet";
	case -ENODEV:
		return "device removed";
	case -EXDEV:
		return "partial isoc transfer";
	case -EINVAL:
		return "ISO madness";
	case -ECONNRESET:
		return "unlinked (async)";
	case -ESHUTDOWN:
		return "device shut down";
	default:
		snprintf(unkmsg, sizeof(unkmsg), "unknown status %d", status);
		return unkmsg;
	}
}

/* usb_pipetype_str
 * retrieve string representation of USB pipe type
 */
static inline char *usb_pipetype_str(int pipe)
{
	if (usb_pipeisoc(pipe))
		return "Isoc";
	if (usb_pipeint(pipe))
		return "Int";
	if (usb_pipecontrol(pipe))
		return "Ctrl";
	if (usb_pipebulk(pipe))
		return "Bulk";
	return "?";
}

/* dump_urb
 * write content of URB to syslog for debugging
 */
static inline void dump_urb(enum debuglevel level, const char *tag,
			    struct urb *urb)
{
#ifdef CONFIG_GIGASET_DEBUG
	int i;
	gig_dbg(level, "%s urb(0x%08lx)->{", tag, (unsigned long) urb);
	if (urb) {
		gig_dbg(level,
			"  dev=0x%08lx, pipe=%s:EP%d/DV%d:%s, "
			"hcpriv=0x%08lx, transfer_flags=0x%x,",
			(unsigned long) urb->dev,
			usb_pipetype_str(urb->pipe),
			usb_pipeendpoint(urb->pipe), usb_pipedevice(urb->pipe),
			usb_pipein(urb->pipe) ? "in" : "out",
			(unsigned long) urb->hcpriv,
			urb->transfer_flags);
		gig_dbg(level,
			"  transfer_buffer=0x%08lx[%d], actual_length=%d, "
			"setup_packet=0x%08lx,",
			(unsigned long) urb->transfer_buffer,
			urb->transfer_buffer_length, urb->actual_length,
			(unsigned long) urb->setup_packet);
		gig_dbg(level,
			"  start_frame=%d, number_of_packets=%d, interval=%d, "
			"error_count=%d,",
			urb->start_frame, urb->number_of_packets, urb->interval,
			urb->error_count);
		gig_dbg(level,
			"  context=0x%08lx, complete=0x%08lx, "
			"iso_frame_desc[]={",
			(unsigned long) urb->context,
			(unsigned long) urb->complete);
		for (i = 0; i < urb->number_of_packets; i++) {
			struct usb_iso_packet_descriptor *pifd
				= &urb->iso_frame_desc[i];
			gig_dbg(level,
				"    {offset=%u, length=%u, actual_length=%u, "
				"status=%u}",
				pifd->offset, pifd->length, pifd->actual_length,
				pifd->status);
		}
	}
	gig_dbg(level, "}}");
#endif
}

/* read/set modem control bits etc. (m10x only) */
static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
				  unsigned new_state)
{
	return -EINVAL;
}

static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag)
{
	return -EINVAL;
}

static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag)
{
	return -EINVAL;
}

/* set/clear bits in base connection state, return previous state
 */
static inline int update_basstate(struct bas_cardstate *ucs,
				  int set, int clear)
{
	unsigned long flags;
	int state;

	spin_lock_irqsave(&ucs->lock, flags);
	state = ucs->basstate;
	ucs->basstate = (state & ~clear) | set;
	spin_unlock_irqrestore(&ucs->lock, flags);
	return state;
}

/* error_hangup
 * hang up any existing connection because of an unrecoverable error
 * This function may be called from any context and takes care of scheduling
 * the necessary actions for execution outside of interrupt context.
 * cs->lock must not be held.
 * argument:
 *	B channel control structure
 */
static inline void error_hangup(struct bc_state *bcs)
{
	struct cardstate *cs = bcs->cs;

	gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL);
	gigaset_schedule_event(cs);
}

/* error_reset
 * reset Gigaset device because of an unrecoverable error
 * This function may be called from any context, and takes care of
 * scheduling the necessary actions for execution outside of interrupt context.
 * cs->hw.bas->lock must not be held.
 * argument:
 *	controller state structure
 */
static inline void error_reset(struct cardstate *cs)
{
	/* reset interrupt pipe to recover (ignore errors) */
	update_basstate(cs->hw.bas, BS_RESETTING, 0);
	if (req_submit(cs->bcs, HD_RESET_INTERRUPT_PIPE, 0, BAS_TIMEOUT))
		/* submission failed, escalate to USB port reset */
		usb_queue_reset_device(cs->hw.bas->interface);
}

/* check_pending
 * check for completion of pending control request
 * parameter:
 *	ucs	hardware specific controller state structure
 */
static void check_pending(struct bas_cardstate *ucs)
{
	unsigned long flags;

	spin_lock_irqsave(&ucs->lock, flags);
	switch (ucs->pending) {
	case 0:
		break;
	case HD_OPEN_ATCHANNEL:
		if (ucs->basstate & BS_ATOPEN)
			ucs->pending = 0;
		break;
	case HD_OPEN_B1CHANNEL:
		if (ucs->basstate & BS_B1OPEN)
			ucs->pending = 0;
		break;
	case HD_OPEN_B2CHANNEL:
		if (ucs->basstate & BS_B2OPEN)
			ucs->pending = 0;
		break;
	case HD_CLOSE_ATCHANNEL:
		if (!(ucs->basstate & BS_ATOPEN))
			ucs->pending = 0;
		break;
	case HD_CLOSE_B1CHANNEL:
		if (!(ucs->basstate & BS_B1OPEN))
			ucs->pending = 0;
		break;
	case HD_CLOSE_B2CHANNEL:
		if (!(ucs->basstate & BS_B2OPEN))
			ucs->pending = 0;
		break;
	case HD_DEVICE_INIT_ACK:		/* no reply expected */
		ucs->pending = 0;
		break;
	case HD_RESET_INTERRUPT_PIPE:
		if (!(ucs->basstate & BS_RESETTING))
			ucs->pending = 0;
		break;
	/*
	 * HD_READ_ATMESSAGE and HD_WRITE_ATMESSAGE are handled separately
	 * and should never end up here
	 */
	default:
		dev_warn(&ucs->interface->dev,
			 "unknown pending request 0x%02x cleared\n",
			 ucs->pending);
		ucs->pending = 0;
	}

	if (!ucs->pending)
		del_timer(&ucs->timer_ctrl);

	spin_unlock_irqrestore(&ucs->lock, flags);
}

/* cmd_in_timeout
 * timeout routine for command input request
 * argument:
 *	controller state structure
 */
static void cmd_in_timeout(unsigned long data)
{
	struct cardstate *cs = (struct cardstate *) data;
	struct bas_cardstate *ucs = cs->hw.bas;
	int rc;

	if (!ucs->rcvbuf_size) {
		gig_dbg(DEBUG_USBREQ, "%s: no receive in progress", __func__);
		return;
	}

	if (ucs->retry_cmd_in++ >= BAS_RETRY) {
		dev_err(cs->dev,
			"control read: timeout, giving up after %d tries\n",
			ucs->retry_cmd_in);
		kfree(ucs->rcvbuf);
		ucs->rcvbuf = NULL;
		ucs->rcvbuf_size = 0;
		error_reset(cs);
		return;
	}

	gig_dbg(DEBUG_USBREQ, "%s: timeout, retry %d",
		__func__, ucs->retry_cmd_in);
	rc = atread_submit(cs, BAS_TIMEOUT);
	if (rc < 0) {
		kfree(ucs->rcvbuf);
		ucs->rcvbuf = NULL;
		ucs->rcvbuf_size = 0;
		if (rc != -ENODEV)
			error_reset(cs);
	}
}

/* read_ctrl_callback
 * USB completion handler for control pipe input
 * called by the USB subsystem in interrupt context
 * parameter:
 *	urb	USB request block
 *		urb->context = inbuf structure for controller state
 */
static void read_ctrl_callback(struct urb *urb)
{
	struct inbuf_t *inbuf = urb->context;
	struct cardstate *cs = inbuf->cs;
	struct bas_cardstate *ucs = cs->hw.bas;
	int status = urb->status;
	unsigned numbytes;
	int rc;

	update_basstate(ucs, 0, BS_ATRDPEND);
	wake_up(&ucs->waitqueue);
	del_timer(&ucs->timer_cmd_in);

	switch (status) {
	case 0:				/* normal completion */
		numbytes = urb->actual_length;
		if (unlikely(numbytes != ucs->rcvbuf_size)) {
			dev_warn(cs->dev,
			       "control read: received %d chars, expected %d\n",
				 numbytes, ucs->rcvbuf_size);
			if (numbytes > ucs->rcvbuf_size)
				numbytes = ucs->rcvbuf_size;
		}

		/* copy received bytes to inbuf, notify event layer */
		if (gigaset_fill_inbuf(inbuf, ucs->rcvbuf, numbytes)) {
			gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
			gigaset_schedule_event(cs);
		}
		break;

	case -ENOENT:			/* cancelled */
	case -ECONNRESET:		/* cancelled (async) */
	case -EINPROGRESS:		/* pending */
	case -ENODEV:			/* device removed */
	case -ESHUTDOWN:		/* device shut down */
		/* no further action necessary */
		gig_dbg(DEBUG_USBREQ, "%s: %s",
			__func__, get_usb_statmsg(status));
		break;

	default:			/* other errors: retry */
		if (ucs->retry_cmd_in++ < BAS_RETRY) {
			gig_dbg(DEBUG_USBREQ, "%s: %s, retry %d", __func__,
				get_usb_statmsg(status), ucs->retry_cmd_in);
			rc = atread_submit(cs, BAS_TIMEOUT);
			if (rc >= 0)
				/* successfully resubmitted, skip freeing */
				return;
			if (rc == -ENODEV)
				/* disconnect, no further action necessary */
				break;
		}
		dev_err(cs->dev, "control read: %s, giving up after %d tries\n",
			get_usb_statmsg(status), ucs->retry_cmd_in);
		error_reset(cs);
	}

	/* read finished, free buffer */
	kfree(ucs->rcvbuf);
	ucs->rcvbuf = NULL;
	ucs->rcvbuf_size = 0;
}

/* atread_submit
 * submit an HD_READ_ATMESSAGE command URB and optionally start a timeout
 * parameters:
 *	cs	controller state structure
 *	timeout	timeout in 1/10 sec., 0: none
 * return value:
 *	0 on success
 *	-EBUSY if another request is pending
 *	any URB submission error code
 */
static int atread_submit(struct cardstate *cs, int timeout)
{
	struct bas_cardstate *ucs = cs->hw.bas;
	int basstate;
	int ret;

	gig_dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)",
		ucs->rcvbuf_size);

	basstate = update_basstate(ucs, BS_ATRDPEND, 0);
	if (basstate & BS_ATRDPEND) {
		dev_err(cs->dev,
			"could not submit HD_READ_ATMESSAGE: URB busy\n");
		return -EBUSY;
	}

	if (basstate & BS_SUSPEND) {
		dev_notice(cs->dev,
			   "HD_READ_ATMESSAGE not submitted, "
			   "suspend in progress\n");
		update_basstate(ucs, 0, BS_ATRDPEND);
		/* treat like disconnect */
		return -ENODEV;
	}

	ucs->dr_cmd_in.bRequestType = IN_VENDOR_REQ;
	ucs->dr_cmd_in.bRequest = HD_READ_ATMESSAGE;
	ucs->dr_cmd_in.wValue = 0;
	ucs->dr_cmd_in.wIndex = 0;
	ucs->dr_cmd_in.wLength = cpu_to_le16(ucs->rcvbuf_size);
	usb_fill_control_urb(ucs->urb_cmd_in, ucs->udev,
			     usb_rcvctrlpipe(ucs->udev, 0),
			     (unsigned char *) &ucs->dr_cmd_in,
			     ucs->rcvbuf, ucs->rcvbuf_size,
			     read_ctrl_callback, cs->inbuf);

	ret = usb_submit_urb(ucs->urb_cmd_in, GFP_ATOMIC);
	if (ret != 0) {
		update_basstate(ucs, 0, BS_ATRDPEND);
		dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: %s\n",
			get_usb_rcmsg(ret));
		return ret;
	}

	if (timeout > 0) {
		gig_dbg(DEBUG_USBREQ, "setting timeout of %d/10 secs", timeout);
		mod_timer(&ucs->timer_cmd_in, jiffies + timeout * HZ / 10);
	}
	return 0;
}

/* int_in_work
 * workqueue routine to clear halt on interrupt in endpoint
 */

static void int_in_work(struct work_struct *work)
{
	struct bas_cardstate *ucs =
		container_of(work, struct bas_cardstate, int_in_wq);
	struct urb *urb = ucs->urb_int_in;
	struct cardstate *cs = urb->context;
	int rc;

	/* clear halt condition */
	rc = usb_clear_halt(ucs->udev, urb->pipe);
	gig_dbg(DEBUG_USBREQ, "clear_halt: %s", get_usb_rcmsg(rc));
	if (rc == 0)
		/* success, resubmit interrupt read URB */
		rc = usb_submit_urb(urb, GFP_ATOMIC);
	if (rc != 0 && rc != -ENODEV) {
		dev_err(cs->dev, "clear halt failed: %s\n", get_usb_rcmsg(rc));
		rc = usb_lock_device_for_reset(ucs->udev, ucs->interface);
		if (rc == 0) {
			rc = usb_reset_device(ucs->udev);
			usb_unlock_device(ucs->udev);
		}
	}
	ucs->retry_int_in = 0;
}

/* int_in_resubmit
 * timer routine for interrupt read delayed resubmit
 * argument:
 *	controller state structure
 */
static void int_in_resubmit(unsigned long data)
{
	struct cardstate *cs = (struct cardstate *) data;
	struct bas_cardstate *ucs = cs->hw.bas;
	int rc;

	if (ucs->retry_int_in++ >= BAS_RETRY) {
		dev_err(cs->dev, "interrupt read: giving up after %d tries\n",
			ucs->retry_int_in);
		usb_queue_reset_device(ucs->interface);
		return;
	}

	gig_dbg(DEBUG_USBREQ, "%s: retry %d", __func__, ucs->retry_int_in);
	rc = usb_submit_urb(ucs->urb_int_in, GFP_ATOMIC);
	if (rc != 0 && rc != -ENODEV) {
		dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
			get_usb_rcmsg(rc));
		usb_queue_reset_device(ucs->interface);
	}
}

/* read_int_callback
 * USB completion handler for interrupt pipe input
 * called by the USB subsystem in interrupt context
 * parameter:
 *	urb	USB request block
 *		urb->context = controller state structure
 */
static void read_int_callback(struct urb *urb)
{
	struct cardstate *cs = urb->context;
	struct bas_cardstate *ucs = cs->hw.bas;
	struct bc_state *bcs;
	int status = urb->status;
	unsigned long flags;
	int rc;
	unsigned l;
	int channel;

	switch (status) {
	case 0:			/* success */
		ucs->retry_int_in = 0;
		break;
	case -EPIPE:			/* endpoint stalled */
		schedule_work(&ucs->int_in_wq);
		/* fall through */
	case -ENOENT:			/* cancelled */
	case -ECONNRESET:		/* cancelled (async) */
	case -EINPROGRESS:		/* pending */
	case -ENODEV:			/* device removed */
	case -ESHUTDOWN:		/* device shut down */
		/* no further action necessary */
		gig_dbg(DEBUG_USBREQ, "%s: %s",
			__func__, get_usb_statmsg(status));
		return;
	case -EPROTO:			/* protocol error or unplug */
	case -EILSEQ:
	case -ETIME:
		/* resubmit after delay */
		gig_dbg(DEBUG_USBREQ, "%s: %s",
			__func__, get_usb_statmsg(status));
		mod_timer(&ucs->timer_int_in, jiffies + HZ / 10);
		return;
	default:		/* other errors: just resubmit */
		dev_warn(cs->dev, "interrupt read: %s\n",
			 get_usb_statmsg(status));
		goto resubmit;
	}

	/* drop incomplete packets even if the missing bytes wouldn't matter */
	if (unlikely(urb->actual_length < IP_MSGSIZE)) {
		dev_warn(cs->dev, "incomplete interrupt packet (%d bytes)\n",
			 urb->actual_length);
		goto resubmit;
	}

	l = (unsigned) ucs->int_in_buf[1] +
	    (((unsigned) ucs->int_in_buf[2]) << 8);

	gig_dbg(DEBUG_USBREQ, "<-------%d: 0x%02x (%u [0x%02x 0x%02x])",
		urb->actual_length, (int)ucs->int_in_buf[0], l,
		(int)ucs->int_in_buf[1], (int)ucs->int_in_buf[2]);

	channel = 0;

	switch (ucs->int_in_buf[0]) {
	case HD_DEVICE_INIT_OK:
		update_basstate(ucs, BS_INIT, 0);
		break;

	case HD_READY_SEND_ATDATA:
		del_timer(&ucs->timer_atrdy);
		update_basstate(ucs, BS_ATREADY, BS_ATTIMER);
		start_cbsend(cs);
		break;

	case HD_OPEN_B2CHANNEL_ACK:
		++channel;
	case HD_OPEN_B1CHANNEL_ACK:
		bcs = cs->bcs + channel;
		update_basstate(ucs, BS_B1OPEN << channel, 0);
		gigaset_bchannel_up(bcs);
		break;

	case HD_OPEN_ATCHANNEL_ACK:
		update_basstate(ucs, BS_ATOPEN, 0);
		start_cbsend(cs);
		break;

	case HD_CLOSE_B2CHANNEL_ACK:
		++channel;
	case HD_CLOSE_B1CHANNEL_ACK:
		bcs = cs->bcs + channel;
		update_basstate(ucs, 0, BS_B1OPEN << channel);
		stopurbs(bcs->hw.bas);
		gigaset_bchannel_down(bcs);
		break;

	case HD_CLOSE_ATCHANNEL_ACK:
		update_basstate(ucs, 0, BS_ATOPEN);
		break;

	case HD_B2_FLOW_CONTROL:
		++channel;
	case HD_B1_FLOW_CONTROL:
		bcs = cs->bcs + channel;
		atomic_add((l - BAS_NORMFRAME) * BAS_CORRFRAMES,
			   &bcs->hw.bas->corrbytes);
		gig_dbg(DEBUG_ISO,
			"Flow control (channel %d, sub %d): 0x%02x => %d",
			channel, bcs->hw.bas->numsub, l,
			atomic_read(&bcs->hw.bas->corrbytes));
		break;

	case HD_RECEIVEATDATA_ACK:	/* AT response ready to be received */
		if (!l) {
			dev_warn(cs->dev,
				"HD_RECEIVEATDATA_ACK with length 0 ignored\n");
			break;
		}
		spin_lock_irqsave(&cs->lock, flags);
		if (ucs->basstate & BS_ATRDPEND) {
			spin_unlock_irqrestore(&cs->lock, flags);
			dev_warn(cs->dev,
	"HD_RECEIVEATDATA_ACK(%d) during HD_READ_ATMESSAGE(%d) ignored\n",
				 l, ucs->rcvbuf_size);
			break;
		}
		if (ucs->rcvbuf_size) {
			/* throw away previous buffer - we have no queue */
			dev_err(cs->dev,
				"receive AT data overrun, %d bytes lost\n",
				ucs->rcvbuf_size);
			kfree(ucs->rcvbuf);
			ucs->rcvbuf_size = 0;
		}
		ucs->rcvbuf = kmalloc(l, GFP_ATOMIC);
		if (ucs->rcvbuf == NULL) {
			spin_unlock_irqrestore(&cs->lock, flags);
			dev_err(cs->dev, "out of memory receiving AT data\n");
			break;
		}
		ucs->rcvbuf_size = l;
		ucs->retry_cmd_in = 0;
		rc = atread_submit(cs, BAS_TIMEOUT);
		if (rc < 0) {
			kfree(ucs->rcvbuf);
			ucs->rcvbuf = NULL;
			ucs->rcvbuf_size = 0;
		}
		spin_unlock_irqrestore(&cs->lock, flags);
		if (rc < 0 && rc != -ENODEV)
			error_reset(cs);
		break;

	case HD_RESET_INTERRUPT_PIPE_ACK:
		update_basstate(ucs, 0, BS_RESETTING);
		dev_notice(cs->dev, "interrupt pipe reset\n");
		break;

	case HD_SUSPEND_END:
		gig_dbg(DEBUG_USBREQ, "HD_SUSPEND_END");
		break;

	default:
		dev_warn(cs->dev,
			 "unknown Gigaset signal 0x%02x (%u) ignored\n",
			 (int) ucs->int_in_buf[0], l);
	}

	check_pending(ucs);
	wake_up(&ucs->waitqueue);

resubmit:
	rc = usb_submit_urb(urb, GFP_ATOMIC);
	if (unlikely(rc != 0 && rc != -ENODEV)) {
		dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
			get_usb_rcmsg(rc));
		error_reset(cs);
	}
}

/* read_iso_callback
 * USB completion handler for B channel isochronous input
 * called by the USB subsystem in interrupt context
 * parameter:
 *	urb	USB request block of completed request
 *		urb->context = bc_state structure
 */
static void read_iso_callback(struct urb *urb)
{
	struct bc_state *bcs;
	struct bas_bc_state *ubc;
	int status = urb->status;
	unsigned long flags;
	int i, rc;

	/* status codes not worth bothering the tasklet with */
	if (unlikely(status == -ENOENT ||
		     status == -ECONNRESET ||
		     status == -EINPROGRESS ||
		     status == -ENODEV ||
		     status == -ESHUTDOWN)) {
		gig_dbg(DEBUG_ISO, "%s: %s",
			__func__, get_usb_statmsg(status));
		return;
	}

	bcs = urb->context;
	ubc = bcs->hw.bas;

	spin_lock_irqsave(&ubc->isoinlock, flags);
	if (likely(ubc->isoindone == NULL)) {
		/* pass URB to tasklet */
		ubc->isoindone = urb;
		ubc->isoinstatus = status;
		tasklet_hi_schedule(&ubc->rcvd_tasklet);
	} else {
		/* tasklet still busy, drop data and resubmit URB */
		gig_dbg(DEBUG_ISO, "%s: overrun", __func__);
		ubc->loststatus = status;
		for (i = 0; i < BAS_NUMFRAMES; i++) {
			ubc->isoinlost += urb->iso_frame_desc[i].actual_length;
			if (unlikely(urb->iso_frame_desc[i].status != 0 &&
				     urb->iso_frame_desc[i].status !=
								-EINPROGRESS))
				ubc->loststatus = urb->iso_frame_desc[i].status;
			urb->iso_frame_desc[i].status = 0;
			urb->iso_frame_desc[i].actual_length = 0;
		}
		if (likely(ubc->running)) {
			/* urb->dev is clobbered by USB subsystem */
			urb->dev = bcs->cs->hw.bas->udev;
			urb->transfer_flags = URB_ISO_ASAP;
			urb->number_of_packets = BAS_NUMFRAMES;
			rc = usb_submit_urb(urb, GFP_ATOMIC);
			if (unlikely(rc != 0 && rc != -ENODEV)) {
				dev_err(bcs->cs->dev,
				       "could not resubmit isoc read URB: %s\n",
					get_usb_rcmsg(rc));
				dump_urb(DEBUG_ISO, "isoc read", urb);
				error_hangup(bcs);
			}
		}
	}
	spin_unlock_irqrestore(&ubc->isoinlock, flags);
}

/* write_iso_callback
 * USB completion handler for B channel isochronous output
 * called by the USB subsystem in interrupt context
 * parameter:
 *	urb	USB request block of completed request
 *		urb->context = isow_urbctx_t structure
 */
static void write_iso_callback(struct urb *urb)
{
	struct isow_urbctx_t *ucx;
	struct bas_bc_state *ubc;
	int status = urb->status;
	unsigned long flags;

	/* status codes not worth bothering the tasklet with */
	if (unlikely(status == -ENOENT ||
		     status == -ECONNRESET ||
		     status == -EINPROGRESS ||
		     status == -ENODEV ||
		     status == -ESHUTDOWN)) {
		gig_dbg(DEBUG_ISO, "%s: %s",
			__func__, get_usb_statmsg(status));
		return;
	}

	/* pass URB context to tasklet */
	ucx = urb->context;
	ubc = ucx->bcs->hw.bas;
	ucx->status = status;

	spin_lock_irqsave(&ubc->isooutlock, flags);
	ubc->isooutovfl = ubc->isooutdone;
	ubc->isooutdone = ucx;
	spin_unlock_irqrestore(&ubc->isooutlock, flags);
	tasklet_hi_schedule(&ubc->sent_tasklet);
}

/* starturbs
 * prepare and submit USB request blocks for isochronous input and output
 * argument:
 *	B channel control structure
 * return value:
 *	0 on success
 *	< 0 on error (no URBs submitted)
 */
static int starturbs(struct bc_state *bcs)
{
	struct bas_bc_state *ubc = bcs->hw.bas;
	struct urb *urb;
	int j, k;
	int rc;

	/* initialize L2 reception */
	if (bcs->proto2 == L2_HDLC)
		bcs->inputstate |= INS_flag_hunt;

	/* submit all isochronous input URBs */
	ubc->running = 1;
	for (k = 0; k < BAS_INURBS; k++) {
		urb = ubc->isoinurbs[k];
		if (!urb) {
			rc = -EFAULT;
			goto error;
		}

		urb->dev = bcs->cs->hw.bas->udev;
		urb->pipe = usb_rcvisocpipe(urb->dev, 3 + 2 * bcs->channel);
		urb->transfer_flags = URB_ISO_ASAP;
		urb->transfer_buffer = ubc->isoinbuf + k * BAS_INBUFSIZE;
		urb->transfer_buffer_length = BAS_INBUFSIZE;
		urb->number_of_packets = BAS_NUMFRAMES;
		urb->interval = BAS_FRAMETIME;
		urb->complete = read_iso_callback;
		urb->context = bcs;
		for (j = 0; j < BAS_NUMFRAMES; j++) {
			urb->iso_frame_desc[j].offset = j * BAS_MAXFRAME;
			urb->iso_frame_desc[j].length = BAS_MAXFRAME;
			urb->iso_frame_desc[j].status = 0;
			urb->iso_frame_desc[j].actual_length = 0;
		}

		dump_urb(DEBUG_ISO, "Initial isoc read", urb);
		rc = usb_submit_urb(urb, GFP_ATOMIC);
		if (rc != 0)
			goto error;
	}

	/* initialize L2 transmission */
	gigaset_isowbuf_init(ubc->isooutbuf, PPP_FLAG);

	/* set up isochronous output URBs for flag idling */
	for (k = 0; k < BAS_OUTURBS; ++k) {
		urb = ubc->isoouturbs[k].urb;
		if (!urb) {
			rc = -EFAULT;
			goto error;
		}
		urb->dev = bcs->cs->hw.bas->udev;
		urb->pipe = usb_sndisocpipe(urb->dev, 4 + 2 * bcs->channel);
		urb->transfer_flags = URB_ISO_ASAP;
		urb->transfer_buffer = ubc->isooutbuf->data;
		urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data);
		urb->number_of_packets = BAS_NUMFRAMES;
		urb->interval = BAS_FRAMETIME;
		urb->complete = write_iso_callback;
		urb->context = &ubc->isoouturbs[k];
		for (j = 0; j < BAS_NUMFRAMES; ++j) {
			urb->iso_frame_desc[j].offset = BAS_OUTBUFSIZE;
			urb->iso_frame_desc[j].length = BAS_NORMFRAME;
			urb->iso_frame_desc[j].status = 0;
			urb->iso_frame_desc[j].actual_length = 0;
		}
		ubc->isoouturbs[k].limit = -1;
	}

	/* keep one URB free, submit the others */
	for (k = 0; k < BAS_OUTURBS-1; ++k) {
		dump_urb(DEBUG_ISO, "Initial isoc write", urb);
		rc = usb_submit_urb(ubc->isoouturbs[k].urb, GFP_ATOMIC);
		if (rc != 0)
			goto error;
	}
	dump_urb(DEBUG_ISO, "Initial isoc write (free)", urb);
	ubc->isooutfree = &ubc->isoouturbs[BAS_OUTURBS-1];
	ubc->isooutdone = ubc->isooutovfl = NULL;
	return 0;
 error:
	stopurbs(ubc);
	return rc;
}

/* stopurbs
 * cancel the USB request blocks for isochronous input and output
 * errors are silently ignored
 * argument:
 *	B channel control structure
 */
static void stopurbs(struct bas_bc_state *ubc)
{
	int k, rc;

	ubc->running = 0;

	for (k = 0; k < BAS_INURBS; ++k) {
		rc = usb_unlink_urb(ubc->isoinurbs[k]);
		gig_dbg(DEBUG_ISO,
			"%s: isoc input URB %d unlinked, result = %s",
			__func__, k, get_usb_rcmsg(rc));
	}

	for (k = 0; k < BAS_OUTURBS; ++k) {
		rc = usb_unlink_urb(ubc->isoouturbs[k].urb);
		gig_dbg(DEBUG_ISO,
			"%s: isoc output URB %d unlinked, result = %s",
			__func__, k, get_usb_rcmsg(rc));
	}
}

/* Isochronous Write - Bottom Half */
/* =============================== */

/* submit_iso_write_urb
 * fill and submit the next isochronous write URB
 * parameters:
 *	ucx	context structure containing URB
 * return value:
 *	number of frames submitted in URB
 *	0 if URB not submitted because no data available (isooutbuf busy)
 *	error code < 0 on error
 */
static int submit_iso_write_urb(struct isow_urbctx_t *ucx)
{
	struct urb *urb = ucx->urb;
	struct bas_bc_state *ubc = ucx->bcs->hw.bas;
	struct usb_iso_packet_descriptor *ifd;
	int corrbytes, nframe, rc;

	/* urb->dev is clobbered by USB subsystem */
	urb->dev = ucx->bcs->cs->hw.bas->udev;
	urb->transfer_flags = URB_ISO_ASAP;
	urb->transfer_buffer = ubc->isooutbuf->data;
	urb->transfer_buffer_length = sizeof(ubc->isooutbuf->data);

	for (nframe = 0; nframe < BAS_NUMFRAMES; nframe++) {
		ifd = &urb->iso_frame_desc[nframe];

		/* compute frame length according to flow control */
		ifd->length = BAS_NORMFRAME;
		corrbytes = atomic_read(&ubc->corrbytes);
		if (corrbytes != 0) {
			gig_dbg(DEBUG_ISO, "%s: corrbytes=%d",
				__func__, corrbytes);
			if (corrbytes > BAS_HIGHFRAME - BAS_NORMFRAME)
				corrbytes = BAS_HIGHFRAME - BAS_NORMFRAME;
			else if (corrbytes < BAS_LOWFRAME - BAS_NORMFRAME)
				corrbytes = BAS_LOWFRAME - BAS_NORMFRAME;
			ifd->length += corrbytes;
			atomic_add(-corrbytes, &ubc->corrbytes);
		}

		/* retrieve block of data to send */
		rc = gigaset_isowbuf_getbytes(ubc->isooutbuf, ifd->length);
		if (rc < 0) {
			if (rc == -EBUSY) {
				gig_dbg(DEBUG_ISO,
					"%s: buffer busy at frame %d",
					__func__, nframe);
				/* tasklet will be restarted from
				   gigaset_isoc_send_skb() */
			} else {
				dev_err(ucx->bcs->cs->dev,
					"%s: buffer error %d at frame %d\n",
					__func__, rc, nframe);
				return rc;
			}
			break;
		}
		ifd->offset = rc;
		ucx->limit = ubc->isooutbuf->nextread;
		ifd->status = 0;
		ifd->actual_length = 0;
	}
	if (unlikely(nframe == 0))
		return 0;	/* no data to send */
	urb->number_of_packets = nframe;

	rc = usb_submit_urb(urb, GFP_ATOMIC);
	if (unlikely(rc)) {
		if (rc == -ENODEV)
			/* device removed - give up silently */
			gig_dbg(DEBUG_ISO, "%s: disconnected", __func__);
		else
			dev_err(ucx->bcs->cs->dev,
				"could not submit isoc write URB: %s\n",
				get_usb_rcmsg(rc));
		return rc;
	}
	++ubc->numsub;
	return nframe;
}

/* write_iso_tasklet
 * tasklet scheduled when an isochronous output URB from the Gigaset device
 * has completed
 * parameter:
 *	data	B channel state structure
 */
static void write_iso_tasklet(unsigned long data)
{
	struct bc_state *bcs = (struct bc_state *) data;
	struct bas_bc_state *ubc = bcs->hw.bas;
	struct cardstate *cs = bcs->cs;
	struct isow_urbctx_t *done, *next, *ovfl;
	struct urb *urb;
	int status;
	struct usb_iso_packet_descriptor *ifd;
	int offset;
	unsigned long flags;
	int i;
	struct sk_buff *skb;
	int len;
	int rc;

	/* loop while completed URBs arrive in time */
	for (;;) {
		if (unlikely(!(ubc->running))) {
			gig_dbg(DEBUG_ISO, "%s: not running", __func__);
			return;
		}

		/* retrieve completed URBs */
		spin_lock_irqsave(&ubc->isooutlock, flags);
		done = ubc->isooutdone;
		ubc->isooutdone = NULL;
		ovfl = ubc->isooutovfl;
		ubc->isooutovfl = NULL;
		spin_unlock_irqrestore(&ubc->isooutlock, flags);
		if (ovfl) {
			dev_err(cs->dev, "isoc write underrun\n");
			error_hangup(bcs);
			break;
		}
		if (!done)
			break;

		/* submit free URB if available */
		spin_lock_irqsave(&ubc->isooutlock, flags);
		next = ubc->isooutfree;
		ubc->isooutfree = NULL;
		spin_unlock_irqrestore(&ubc->isooutlock, flags);
		if (next) {
			rc = submit_iso_write_urb(next);
			if (unlikely(rc <= 0 && rc != -ENODEV)) {
				/* could not submit URB, put it back */
				spin_lock_irqsave(&ubc->isooutlock, flags);
				if (ubc->isooutfree == NULL) {
					ubc->isooutfree = next;
					next = NULL;
				}
				spin_unlock_irqrestore(&ubc->isooutlock, flags);
				if (next) {
					/* couldn't put it back */
					dev_err(cs->dev,
						"losing isoc write URB\n");
					error_hangup(bcs);
				}
			}
		}

		/* process completed URB */
		urb = done->urb;
		status = done->status;
		switch (status) {
		case -EXDEV:			/* partial completion */
			gig_dbg(DEBUG_ISO, "%s: URB partially completed",
				__func__);
			/* fall through - what's the difference anyway? */
		case 0:				/* normal completion */
			/* inspect individual frames
			 * assumptions (for lack of documentation):
			 * - actual_length bytes of first frame in error are
			 *   successfully sent
			 * - all following frames are not sent at all
			 */
			offset = done->limit;	/* default (no error) */
			for (i = 0; i < BAS_NUMFRAMES; i++) {
				ifd = &urb->iso_frame_desc[i];
				if (ifd->status ||
				    ifd->actual_length != ifd->length) {
					dev_warn(cs->dev,
					    "isoc write: frame %d[%d/%d]: %s\n",
						 i, ifd->actual_length,
						 ifd->length,
						 get_usb_statmsg(ifd->status));
					offset = (ifd->offset +
						  ifd->actual_length)
						 % BAS_OUTBUFSIZE;
					break;
				}
			}
			break;
		case -EPIPE:			/* stall - probably underrun */
			dev_err(cs->dev, "isoc write: stalled\n");
			error_hangup(bcs);
			break;
		default:			/* other errors */
			dev_warn(cs->dev, "isoc write: %s\n",
				 get_usb_statmsg(status));
		}

		/* mark the write buffer area covered by this URB as free */
		if (done->limit >= 0)
			ubc->isooutbuf->read = done->limit;

		/* mark URB as free */
		spin_lock_irqsave(&ubc->isooutlock, flags);
		next = ubc->isooutfree;
		ubc->isooutfree = done;
		spin_unlock_irqrestore(&ubc->isooutlock, flags);
		if (next) {
			/* only one URB still active - resubmit one */
			rc = submit_iso_write_urb(next);
			if (unlikely(rc <= 0 && rc != -ENODEV)) {
				/* couldn't submit */
				error_hangup(bcs);
			}
		}
	}

	/* process queued SKBs */
	while ((skb = skb_dequeue(&bcs->squeue))) {
		/* copy to output buffer, doing L2 encapsulation */
		len = skb->len;
		if (gigaset_isoc_buildframe(bcs, skb->data, len) == -EAGAIN) {
			/* insufficient buffer space, push back onto queue */
			skb_queue_head(&bcs->squeue, skb);
			gig_dbg(DEBUG_ISO, "%s: skb requeued, qlen=%d",
				__func__, skb_queue_len(&bcs->squeue));
			break;
		}
		skb_pull(skb, len);
		gigaset_skb_sent(bcs, skb);
		dev_kfree_skb_any(skb);
	}
}

/* Isochronous Read - Bottom Half */
/* ============================== */

/* read_iso_tasklet
 * tasklet scheduled when an isochronous input URB from the Gigaset device
 * has completed
 * parameter:
 *	data	B channel state structure
 */
static void read_iso_tasklet(unsigned long data)
{
	struct bc_state *bcs = (struct bc_state *) data;
	struct bas_bc_state *ubc = bcs->hw.bas;
	struct cardstate *cs = bcs->cs;
	struct urb *urb;
	int status;
	struct usb_iso_packet_descriptor *ifd;
	char *rcvbuf;
	unsigned long flags;
	int totleft, numbytes, offset, frame, rc;

	/* loop while more completed URBs arrive in the meantime */
	for (;;) {
		/* retrieve URB */
		spin_lock_irqsave(&ubc->isoinlock, flags);
		urb = ubc->isoindone;
		if (!urb) {
			spin_unlock_irqrestore(&ubc->isoinlock, flags);
			return;
		}
		status = ubc->isoinstatus;
		ubc->isoindone = NULL;
		if (unlikely(ubc->loststatus != -EINPROGRESS)) {
			dev_warn(cs->dev,
		"isoc read overrun, URB dropped (status: %s, %d bytes)\n",
				 get_usb_statmsg(ubc->loststatus),
				 ubc->isoinlost);
			ubc->loststatus = -EINPROGRESS;
		}
		spin_unlock_irqrestore(&ubc->isoinlock, flags);

		if (unlikely(!(ubc->running))) {
			gig_dbg(DEBUG_ISO,
				"%s: channel not running, "
				"dropped URB with status: %s",
				__func__, get_usb_statmsg(status));
			return;
		}

		switch (status) {
		case 0:				/* normal completion */
			break;
		case -EXDEV:			/* inspect individual frames
						   (we do that anyway) */
			gig_dbg(DEBUG_ISO, "%s: URB partially completed",
				__func__);
			break;
		case -ENOENT:
		case -ECONNRESET:
		case -EINPROGRESS:
			gig_dbg(DEBUG_ISO, "%s: %s",
				__func__, get_usb_statmsg(status));
			continue;		/* -> skip */
		case -EPIPE:
			dev_err(cs->dev, "isoc read: stalled\n");
			error_hangup(bcs);
			continue;		/* -> skip */
		default:			/* other error */
			dev_warn(cs->dev, "isoc read: %s\n",
				 get_usb_statmsg(status));
			goto error;
		}

		rcvbuf = urb->transfer_buffer;
		totleft = urb->actual_length;
		for (frame = 0; totleft > 0 && frame < BAS_NUMFRAMES; frame++) {
			ifd = &urb->iso_frame_desc[frame];
			numbytes = ifd->actual_length;
			switch (ifd->status) {
			case 0:			/* success */
				break;
			case -EPROTO:		/* protocol error or unplug */
			case -EILSEQ:
			case -ETIME:
				/* probably just disconnected, ignore */
				gig_dbg(DEBUG_ISO,
					"isoc read: frame %d[%d]: %s\n",
					frame, numbytes,
					get_usb_statmsg(ifd->status));
				break;
			default:		/* other error */
				/* report, assume transferred bytes are ok */
				dev_warn(cs->dev,
					 "isoc read: frame %d[%d]: %s\n",
					 frame, numbytes,
					 get_usb_statmsg(ifd->status));
			}
			if (unlikely(numbytes > BAS_MAXFRAME))
				dev_warn(cs->dev,
					 "isoc read: frame %d[%d]: %s\n",
					 frame, numbytes,
					 "exceeds max frame size");
			if (unlikely(numbytes > totleft)) {
				dev_warn(cs->dev,
					 "isoc read: frame %d[%d]: %s\n",
					 frame, numbytes,
					 "exceeds total transfer length");
				numbytes = totleft;
			}
			offset = ifd->offset;
			if (unlikely(offset + numbytes > BAS_INBUFSIZE)) {
				dev_warn(cs->dev,
					 "isoc read: frame %d[%d]: %s\n",
					 frame, numbytes,
					 "exceeds end of buffer");
				numbytes = BAS_INBUFSIZE - offset;
			}
			gigaset_isoc_receive(rcvbuf + offset, numbytes, bcs);
			totleft -= numbytes;
		}
		if (unlikely(totleft > 0))
			dev_warn(cs->dev, "isoc read: %d data bytes missing\n",
				 totleft);

error:
		/* URB processed, resubmit */
		for (frame = 0; frame < BAS_NUMFRAMES; frame++) {
			urb->iso_frame_desc[frame].status = 0;
			urb->iso_frame_desc[frame].actual_length = 0;
		}
		/* urb->dev is clobbered by USB subsystem */
		urb->dev = bcs->cs->hw.bas->udev;
		urb->transfer_flags = URB_ISO_ASAP;
		urb->number_of_packets = BAS_NUMFRAMES;
		rc = usb_submit_urb(urb, GFP_ATOMIC);
		if (unlikely(rc != 0 && rc != -ENODEV)) {
			dev_err(cs->dev,
				"could not resubmit isoc read URB: %s\n",
				get_usb_rcmsg(rc));
			dump_urb(DEBUG_ISO, "resubmit isoc read", urb);
			error_hangup(bcs);
		}
	}
}

/* Channel Operations */
/* ================== */

/* req_timeout
 * timeout routine for control output request
 * argument:
 *	controller state structure
 */
static void req_timeout(unsigned long data)
{
	struct cardstate *cs = (struct cardstate *) data;
	struct bas_cardstate *ucs = cs->hw.bas;
	int pending;
	unsigned long flags;

	check_pending(ucs);

	spin_lock_irqsave(&ucs->lock, flags);
	pending = ucs->pending;
	ucs->pending = 0;
	spin_unlock_irqrestore(&ucs->lock, flags);

	switch (pending) {
	case 0:					/* no pending request */
		gig_dbg(DEBUG_USBREQ, "%s: no request pending", __func__);
		break;

	case HD_OPEN_ATCHANNEL:
		dev_err(cs->dev, "timeout opening AT channel\n");
		error_reset(cs);
		break;

	case HD_OPEN_B1CHANNEL:
		dev_err(cs->dev, "timeout opening channel 1\n");
		error_hangup(&cs->bcs[0]);
		break;

	case HD_OPEN_B2CHANNEL:
		dev_err(cs->dev, "timeout opening channel 2\n");
		error_hangup(&cs->bcs[1]);
		break;

	case HD_CLOSE_ATCHANNEL:
		dev_err(cs->dev, "timeout closing AT channel\n");
		error_reset(cs);
		break;

	case HD_CLOSE_B1CHANNEL:
		dev_err(cs->dev, "timeout closing channel 1\n");
		error_reset(cs);
		break;

	case HD_CLOSE_B2CHANNEL:
		dev_err(cs->dev, "timeout closing channel 2\n");
		error_reset(cs);
		break;

	case HD_RESET_INTERRUPT_PIPE:
		/* error recovery escalation */
		dev_err(cs->dev,
			"reset interrupt pipe timeout, attempting USB reset\n");
		usb_queue_reset_device(ucs->interface);
		break;

	default:
		dev_warn(cs->dev, "request 0x%02x timed out, clearing\n",
			 pending);
	}

	wake_up(&ucs->waitqueue);
}

/* write_ctrl_callback
 * USB completion handler for control pipe output
 * called by the USB subsystem in interrupt context
 * parameter:
 *	urb	USB request block of completed request
 *		urb->context = hardware specific controller state structure
 */
static void write_ctrl_callback(struct urb *urb)
{
	struct bas_cardstate *ucs = urb->context;
	int status = urb->status;
	int rc;
	unsigned long flags;

	/* check status */
	switch (status) {
	case 0:					/* normal completion */
		spin_lock_irqsave(&ucs->lock, flags);
		switch (ucs->pending) {
		case HD_DEVICE_INIT_ACK:	/* no reply expected */
			del_timer(&ucs->timer_ctrl);
			ucs->pending = 0;
			break;
		}
		spin_unlock_irqrestore(&ucs->lock, flags);
		return;

	case -ENOENT:			/* cancelled */
	case -ECONNRESET:		/* cancelled (async) */
	case -EINPROGRESS:		/* pending */
	case -ENODEV:			/* device removed */
	case -ESHUTDOWN:		/* device shut down */
		/* ignore silently */
		gig_dbg(DEBUG_USBREQ, "%s: %s",
			__func__, get_usb_statmsg(status));
		break;

	default:				/* any failure */
		/* don't retry if suspend requested */
		if (++ucs->retry_ctrl > BAS_RETRY ||
		    (ucs->basstate & BS_SUSPEND)) {
			dev_err(&ucs->interface->dev,
				"control request 0x%02x failed: %s\n",
				ucs->dr_ctrl.bRequest,
				get_usb_statmsg(status));
			break;		/* give up */
		}
		dev_notice(&ucs->interface->dev,
			   "control request 0x%02x: %s, retry %d\n",
			   ucs->dr_ctrl.bRequest, get_usb_statmsg(status),
			   ucs->retry_ctrl);
		/* urb->dev is clobbered by USB subsystem */
		urb->dev = ucs->udev;
		rc = usb_submit_urb(urb, GFP_ATOMIC);
		if (unlikely(rc)) {
			dev_err(&ucs->interface->dev,
				"could not resubmit request 0x%02x: %s\n",
				ucs->dr_ctrl.bRequest, get_usb_rcmsg(rc));
			break;
		}
		/* resubmitted */
		return;
	}

	/* failed, clear pending request */
	spin_lock_irqsave(&ucs->lock, flags);
	del_timer(&ucs->timer_ctrl);
	ucs->pending = 0;
	spin_unlock_irqrestore(&ucs->lock, flags);
	wake_up(&ucs->waitqueue);
}

/* req_submit
 * submit a control output request without message buffer to the Gigaset base
 * and optionally start a timeout
 * parameters:
 *	bcs	B channel control structure
 *	req	control request code (HD_*)
 *	val	control request parameter value (set to 0 if unused)
 *	timeout	timeout in seconds (0: no timeout)
 * return value:
 *	0 on success
 *	-EBUSY if another request is pending
 *	any URB submission error code
 */
static int req_submit(struct bc_state *bcs, int req, int val, int timeout)
{
	struct bas_cardstate *ucs = bcs->cs->hw.bas;
	int ret;
	unsigned long flags;

	gig_dbg(DEBUG_USBREQ, "-------> 0x%02x (%d)", req, val);

	spin_lock_irqsave(&ucs->lock, flags);
	if (ucs->pending) {
		spin_unlock_irqrestore(&ucs->lock, flags);
		dev_err(bcs->cs->dev,
			"submission of request 0x%02x failed: "
			"request 0x%02x still pending\n",
			req, ucs->pending);
		return -EBUSY;
	}

	ucs->dr_ctrl.bRequestType = OUT_VENDOR_REQ;
	ucs->dr_ctrl.bRequest = req;
	ucs->dr_ctrl.wValue = cpu_to_le16(val);
	ucs->dr_ctrl.wIndex = 0;
	ucs->dr_ctrl.wLength = 0;
	usb_fill_control_urb(ucs->urb_ctrl, ucs->udev,
			     usb_sndctrlpipe(ucs->udev, 0),
			     (unsigned char *) &ucs->dr_ctrl, NULL, 0,
			     write_ctrl_callback, ucs);
	ucs->retry_ctrl = 0;
	ret = usb_submit_urb(ucs->urb_ctrl, GFP_ATOMIC);
	if (unlikely(ret)) {
		dev_err(bcs->cs->dev, "could not submit request 0x%02x: %s\n",
			req, get_usb_rcmsg(ret));
		spin_unlock_irqrestore(&ucs->lock, flags);
		return ret;
	}
	ucs->pending = req;

	if (timeout > 0) {
		gig_dbg(DEBUG_USBREQ, "setting timeout of %d/10 secs", timeout);
		mod_timer(&ucs->timer_ctrl, jiffies + timeout * HZ / 10);
	}

	spin_unlock_irqrestore(&ucs->lock, flags);
	return 0;
}

/* gigaset_init_bchannel
 * called by common.c to connect a B channel
 * initialize isochronous I/O and tell the Gigaset base to open the channel
 * argument:
 *	B channel control structure
 * return value:
 *	0 on success, error code < 0 on error
 */
static int gigaset_init_bchannel(struct bc_state *bcs)
{
	struct cardstate *cs = bcs->cs;
	int req, ret;
	unsigned long flags;

	spin_lock_irqsave(&cs->lock, flags);
	if (unlikely(!cs->connected)) {
		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
		spin_unlock_irqrestore(&cs->lock, flags);
		return -ENODEV;
	}

	if (cs->hw.bas->basstate & BS_SUSPEND) {
		dev_notice(cs->dev,
			   "not starting isoc I/O, suspend in progress\n");
		spin_unlock_irqrestore(&cs->lock, flags);
		return -EHOSTUNREACH;
	}

	ret = starturbs(bcs);
	if (ret < 0) {
		spin_unlock_irqrestore(&cs->lock, flags);
		dev_err(cs->dev,
			"could not start isoc I/O for channel B%d: %s\n",
			bcs->channel + 1,
			ret == -EFAULT ? "null URB" : get_usb_rcmsg(ret));
		if (ret != -ENODEV)
			error_hangup(bcs);
		return ret;
	}

	req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL;
	ret = req_submit(bcs, req, 0, BAS_TIMEOUT);
	if (ret < 0) {
		dev_err(cs->dev, "could not open channel B%d\n",
			bcs->channel + 1);
		stopurbs(bcs->hw.bas);
	}

	spin_unlock_irqrestore(&cs->lock, flags);
	if (ret < 0 && ret != -ENODEV)
		error_hangup(bcs);
	return ret;
}

/* gigaset_close_bchannel
 * called by common.c to disconnect a B channel
 * tell the Gigaset base to close the channel
 * stopping isochronous I/O and LL notification will be done when the
 * acknowledgement for the close arrives
 * argument:
 *	B channel control structure
 * return value:
 *	0 on success, error code < 0 on error
 */
static int gigaset_close_bchannel(struct bc_state *bcs)
{
	struct cardstate *cs = bcs->cs;
	int req, ret;
	unsigned long flags;

	spin_lock_irqsave(&cs->lock, flags);
	if (unlikely(!cs->connected)) {
		spin_unlock_irqrestore(&cs->lock, flags);
		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
		return -ENODEV;
	}

	if (!(cs->hw.bas->basstate & (bcs->channel ? BS_B2OPEN : BS_B1OPEN))) {
		/* channel not running: just signal common.c */
		spin_unlock_irqrestore(&cs->lock, flags);
		gigaset_bchannel_down(bcs);
		return 0;
	}

	/* channel running: tell device to close it */
	req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL;
	ret = req_submit(bcs, req, 0, BAS_TIMEOUT);
	if (ret < 0)
		dev_err(cs->dev, "closing channel B%d failed\n",
			bcs->channel + 1);

	spin_unlock_irqrestore(&cs->lock, flags);
	return ret;
}

/* Device Operations */
/* ================= */

/* complete_cb
 * unqueue first command buffer from queue, waking any sleepers
 * must be called with cs->cmdlock held
 * parameter:
 *	cs	controller state structure
 */
static void complete_cb(struct cardstate *cs)
{
	struct cmdbuf_t *cb = cs->cmdbuf;

	/* unqueue completed buffer */
	cs->cmdbytes -= cs->curlen;
	gig_dbg(DEBUG_OUTPUT, "write_command: sent %u bytes, %u left",
		cs->curlen, cs->cmdbytes);
	if (cb->next != NULL) {
		cs->cmdbuf = cb->next;
		cs->cmdbuf->prev = NULL;
		cs->curlen = cs->cmdbuf->len;
	} else {
		cs->cmdbuf = NULL;
		cs->lastcmdbuf = NULL;
		cs->curlen = 0;
	}

	if (cb->wake_tasklet)
		tasklet_schedule(cb->wake_tasklet);

	kfree(cb);
}

/* write_command_callback
 * USB completion handler for AT command transmission
 * called by the USB subsystem in interrupt context
 * parameter:
 *	urb	USB request block of completed request
 *		urb->context = controller state structure
 */
static void write_command_callback(struct urb *urb)
{
	struct cardstate *cs = urb->context;
	struct bas_cardstate *ucs = cs->hw.bas;
	int status = urb->status;
	unsigned long flags;

	update_basstate(ucs, 0, BS_ATWRPEND);
	wake_up(&ucs->waitqueue);

	/* check status */
	switch (status) {
	case 0:					/* normal completion */
		break;
	case -ENOENT:			/* cancelled */
	case -ECONNRESET:		/* cancelled (async) */
	case -EINPROGRESS:		/* pending */
	case -ENODEV:			/* device removed */
	case -ESHUTDOWN:		/* device shut down */
		/* ignore silently */
		gig_dbg(DEBUG_USBREQ, "%s: %s",
			__func__, get_usb_statmsg(status));
		return;
	default:				/* any failure */
		if (++ucs->retry_cmd_out > BAS_RETRY) {
			dev_warn(cs->dev,
				 "command write: %s, "
				 "giving up after %d retries\n",
				 get_usb_statmsg(status),
				 ucs->retry_cmd_out);
			break;
		}
		if (ucs->basstate & BS_SUSPEND) {
			dev_warn(cs->dev,
				 "command write: %s, "
				 "won't retry - suspend requested\n",
				 get_usb_statmsg(status));
			break;
		}
		if (cs->cmdbuf == NULL) {
			dev_warn(cs->dev,
				 "command write: %s, "
				 "cannot retry - cmdbuf gone\n",
				 get_usb_statmsg(status));
			break;
		}
		dev_notice(cs->dev, "command write: %s, retry %d\n",
			   get_usb_statmsg(status), ucs->retry_cmd_out);
		if (atwrite_submit(cs, cs->cmdbuf->buf, cs->cmdbuf->len) >= 0)
			/* resubmitted - bypass regular exit block */
			return;
		/* command send failed, assume base still waiting */
		update_basstate(ucs, BS_ATREADY, 0);
	}

	spin_lock_irqsave(&cs->cmdlock, flags);
	if (cs->cmdbuf != NULL)
		complete_cb(cs);
	spin_unlock_irqrestore(&cs->cmdlock, flags);
}

/* atrdy_timeout
 * timeout routine for AT command transmission
 * argument:
 *	controller state structure
 */
static void atrdy_timeout(unsigned long data)
{
	struct cardstate *cs = (struct cardstate *) data;
	struct bas_cardstate *ucs = cs->hw.bas;

	dev_warn(cs->dev, "timeout waiting for HD_READY_SEND_ATDATA\n");

	/* fake the missing signal - what else can I do? */
	update_basstate(ucs, BS_ATREADY, BS_ATTIMER);
	start_cbsend(cs);
}

/* atwrite_submit
 * submit an HD_WRITE_ATMESSAGE command URB
 * parameters:
 *	cs	controller state structure
 *	buf	buffer containing command to send
 *	len	length of command to send
 * return value:
 *	0 on success
 *	-EBUSY if another request is pending
 *	any URB submission error code
 */
static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len)
{
	struct bas_cardstate *ucs = cs->hw.bas;
	int rc;

	gig_dbg(DEBUG_USBREQ, "-------> HD_WRITE_ATMESSAGE (%d)", len);

	if (update_basstate(ucs, BS_ATWRPEND, 0) & BS_ATWRPEND) {
		dev_err(cs->dev,
			"could not submit HD_WRITE_ATMESSAGE: URB busy\n");
		return -EBUSY;
	}

	ucs->dr_cmd_out.bRequestType = OUT_VENDOR_REQ;
	ucs->dr_cmd_out.bRequest = HD_WRITE_ATMESSAGE;
	ucs->dr_cmd_out.wValue = 0;
	ucs->dr_cmd_out.wIndex = 0;
	ucs->dr_cmd_out.wLength = cpu_to_le16(len);
	usb_fill_control_urb(ucs->urb_cmd_out, ucs->udev,
			     usb_sndctrlpipe(ucs->udev, 0),
			     (unsigned char *) &ucs->dr_cmd_out, buf, len,
			     write_command_callback, cs);
	rc = usb_submit_urb(ucs->urb_cmd_out, GFP_ATOMIC);
	if (unlikely(rc)) {
		update_basstate(ucs, 0, BS_ATWRPEND);
		dev_err(cs->dev, "could not submit HD_WRITE_ATMESSAGE: %s\n",
			get_usb_rcmsg(rc));
		return rc;
	}

	/* submitted successfully, start timeout if necessary */
	if (!(update_basstate(ucs, BS_ATTIMER, BS_ATREADY) & BS_ATTIMER)) {
		gig_dbg(DEBUG_OUTPUT, "setting ATREADY timeout of %d/10 secs",
			ATRDY_TIMEOUT);
		mod_timer(&ucs->timer_atrdy, jiffies + ATRDY_TIMEOUT * HZ / 10);
	}
	return 0;
}

/* start_cbsend
 * start transmission of AT command queue if necessary
 * parameter:
 *	cs		controller state structure
 * return value:
 *	0 on success
 *	error code < 0 on error
 */
static int start_cbsend(struct cardstate *cs)
{
	struct cmdbuf_t *cb;
	struct bas_cardstate *ucs = cs->hw.bas;
	unsigned long flags;
	int rc;
	int retval = 0;

	/* check if suspend requested */
	if (ucs->basstate & BS_SUSPEND) {
		gig_dbg(DEBUG_OUTPUT, "suspending");
		return -EHOSTUNREACH;
	}

	/* check if AT channel is open */
	if (!(ucs->basstate & BS_ATOPEN)) {
		gig_dbg(DEBUG_OUTPUT, "AT channel not open");
		rc = req_submit(cs->bcs, HD_OPEN_ATCHANNEL, 0, BAS_TIMEOUT);
		if (rc < 0) {
			/* flush command queue */
			spin_lock_irqsave(&cs->cmdlock, flags);
			while (cs->cmdbuf != NULL)
				complete_cb(cs);
			spin_unlock_irqrestore(&cs->cmdlock, flags);
		}
		return rc;
	}

	/* try to send first command in queue */
	spin_lock_irqsave(&cs->cmdlock, flags);

	while ((cb = cs->cmdbuf) != NULL && (ucs->basstate & BS_ATREADY)) {
		ucs->retry_cmd_out = 0;
		rc = atwrite_submit(cs, cb->buf, cb->len);
		if (unlikely(rc)) {
			retval = rc;
			complete_cb(cs);
		}
	}

	spin_unlock_irqrestore(&cs->cmdlock, flags);
	return retval;
}

/* gigaset_write_cmd
 * This function is called by the device independent part of the driver
 * to transmit an AT command string to the Gigaset device.
 * It encapsulates the device specific method for transmission over the
 * direct USB connection to the base.
 * The command string is added to the queue of commands to send, and
 * USB transmission is started if necessary.
 * parameters:
 *	cs		controller state structure
 *	cb		command buffer structure
 * return value:
 *	number of bytes queued on success
 *	error code < 0 on error
 */
static int gigaset_write_cmd(struct cardstate *cs, struct cmdbuf_t *cb)
{
	unsigned long flags;
	int rc;

	gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
			     DEBUG_TRANSCMD : DEBUG_LOCKCMD,
			   "CMD Transmit", cb->len, cb->buf);

	/* translate "+++" escape sequence sent as a single separate command
	 * into "close AT channel" command for error recovery
	 * The next command will reopen the AT channel automatically.
	 */
	if (cb->len == 3 && !memcmp(cb->buf, "+++", 3)) {
		/* If an HD_RECEIVEATDATA_ACK message remains unhandled
		 * because of an error, the base never sends another one.
		 * The response channel is thus effectively blocked.
		 * Closing and reopening the AT channel does *not* clear
		 * this condition.
		 * As a stopgap measure, submit a zero-length AT read
		 * before closing the AT channel. This has the undocumented
		 * effect of triggering a new HD_RECEIVEATDATA_ACK message
		 * from the base if necessary.
		 * The subsequent AT channel close then discards any pending
		 * messages.
		 */
		spin_lock_irqsave(&cs->lock, flags);
		if (!(cs->hw.bas->basstate & BS_ATRDPEND)) {
			kfree(cs->hw.bas->rcvbuf);
			cs->hw.bas->rcvbuf = NULL;
			cs->hw.bas->rcvbuf_size = 0;
			cs->hw.bas->retry_cmd_in = 0;
			atread_submit(cs, 0);
		}
		spin_unlock_irqrestore(&cs->lock, flags);

		rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT);
		if (cb->wake_tasklet)
			tasklet_schedule(cb->wake_tasklet);
		if (!rc)
			rc = cb->len;
		kfree(cb);
		return rc;
	}

	spin_lock_irqsave(&cs->cmdlock, flags);
	cb->prev = cs->lastcmdbuf;
	if (cs->lastcmdbuf)
		cs->lastcmdbuf->next = cb;
	else {
		cs->cmdbuf = cb;
		cs->curlen = cb->len;
	}
	cs->cmdbytes += cb->len;
	cs->lastcmdbuf = cb;
	spin_unlock_irqrestore(&cs->cmdlock, flags);

	spin_lock_irqsave(&cs->lock, flags);
	if (unlikely(!cs->connected)) {
		spin_unlock_irqrestore(&cs->lock, flags);
		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
		/* flush command queue */
		spin_lock_irqsave(&cs->cmdlock, flags);
		while (cs->cmdbuf != NULL)
			complete_cb(cs);
		spin_unlock_irqrestore(&cs->cmdlock, flags);
		return -ENODEV;
	}
	rc = start_cbsend(cs);
	spin_unlock_irqrestore(&cs->lock, flags);
	return rc < 0 ? rc : cb->len;
}

/* gigaset_write_room
 * tty_driver.write_room interface routine
 * return number of characters the driver will accept to be written via
 * gigaset_write_cmd
 * parameter:
 *	controller state structure
 * return value:
 *	number of characters
 */
static int gigaset_write_room(struct cardstate *cs)
{
	return IF_WRITEBUF;
}

/* gigaset_chars_in_buffer
 * tty_driver.chars_in_buffer interface routine
 * return number of characters waiting to be sent
 * parameter:
 *	controller state structure
 * return value:
 *	number of characters
 */
static int gigaset_chars_in_buffer(struct cardstate *cs)
{
	return cs->cmdbytes;
}

/* gigaset_brkchars
 * implementation of ioctl(GIGASET_BRKCHARS)
 * parameter:
 *	controller state structure
 * return value:
 *	-EINVAL (unimplemented function)
 */
static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
{
	return -EINVAL;
}


/* Device Initialization/Shutdown */
/* ============================== */

/* Free hardware dependent part of the B channel structure
 * parameter:
 *	bcs	B channel structure
 * return value:
 *	!=0 on success
 */
static int gigaset_freebcshw(struct bc_state *bcs)
{
	struct bas_bc_state *ubc = bcs->hw.bas;
	int i;

	if (!ubc)
		return 0;

	/* kill URBs and tasklets before freeing - better safe than sorry */
	ubc->running = 0;
	gig_dbg(DEBUG_INIT, "%s: killing isoc URBs", __func__);
	for (i = 0; i < BAS_OUTURBS; ++i) {
		usb_kill_urb(ubc->isoouturbs[i].urb);
		usb_free_urb(ubc->isoouturbs[i].urb);
	}
	for (i = 0; i < BAS_INURBS; ++i) {
		usb_kill_urb(ubc->isoinurbs[i]);
		usb_free_urb(ubc->isoinurbs[i]);
	}
	tasklet_kill(&ubc->sent_tasklet);
	tasklet_kill(&ubc->rcvd_tasklet);
	kfree(ubc->isooutbuf);
	kfree(ubc);
	bcs->hw.bas = NULL;
	return 1;
}

/* Initialize hardware dependent part of the B channel structure
 * parameter:
 *	bcs	B channel structure
 * return value:
 *	!=0 on success
 */
static int gigaset_initbcshw(struct bc_state *bcs)
{
	int i;
	struct bas_bc_state *ubc;

	bcs->hw.bas = ubc = kmalloc(sizeof(struct bas_bc_state), GFP_KERNEL);
	if (!ubc) {
		pr_err("out of memory\n");
		return 0;
	}

	ubc->running = 0;
	atomic_set(&ubc->corrbytes, 0);
	spin_lock_init(&ubc->isooutlock);
	for (i = 0; i < BAS_OUTURBS; ++i) {
		ubc->isoouturbs[i].urb = NULL;
		ubc->isoouturbs[i].bcs = bcs;
	}
	ubc->isooutdone = ubc->isooutfree = ubc->isooutovfl = NULL;
	ubc->numsub = 0;
	ubc->isooutbuf = kmalloc(sizeof(struct isowbuf_t), GFP_KERNEL);
	if (!ubc->isooutbuf) {
		pr_err("out of memory\n");
		kfree(ubc);
		bcs->hw.bas = NULL;
		return 0;
	}
	tasklet_init(&ubc->sent_tasklet,
		     write_iso_tasklet, (unsigned long) bcs);

	spin_lock_init(&ubc->isoinlock);
	for (i = 0; i < BAS_INURBS; ++i)
		ubc->isoinurbs[i] = NULL;
	ubc->isoindone = NULL;
	ubc->loststatus = -EINPROGRESS;
	ubc->isoinlost = 0;
	ubc->seqlen = 0;
	ubc->inbyte = 0;
	ubc->inbits = 0;
	ubc->goodbytes = 0;
	ubc->alignerrs = 0;
	ubc->fcserrs = 0;
	ubc->frameerrs = 0;
	ubc->giants = 0;
	ubc->runts = 0;
	ubc->aborts = 0;
	ubc->shared0s = 0;
	ubc->stolen0s = 0;
	tasklet_init(&ubc->rcvd_tasklet,
		     read_iso_tasklet, (unsigned long) bcs);
	return 1;
}

static void gigaset_reinitbcshw(struct bc_state *bcs)
{
	struct bas_bc_state *ubc = bcs->hw.bas;

	bcs->hw.bas->running = 0;
	atomic_set(&bcs->hw.bas->corrbytes, 0);
	bcs->hw.bas->numsub = 0;
	spin_lock_init(&ubc->isooutlock);
	spin_lock_init(&ubc->isoinlock);
	ubc->loststatus = -EINPROGRESS;
}

static void gigaset_freecshw(struct cardstate *cs)
{
	/* timers, URBs and rcvbuf are disposed of in disconnect */
	kfree(cs->hw.bas->int_in_buf);
	kfree(cs->hw.bas);
	cs->hw.bas = NULL;
}

static int gigaset_initcshw(struct cardstate *cs)
{
	struct bas_cardstate *ucs;

	cs->hw.bas = ucs = kmalloc(sizeof *ucs, GFP_KERNEL);
	if (!ucs) {
		pr_err("out of memory\n");
		return 0;
	}
	ucs->int_in_buf = kmalloc(IP_MSGSIZE, GFP_KERNEL);
	if (!ucs->int_in_buf) {
		kfree(ucs);
		pr_err("out of memory\n");
		return 0;
	}

	ucs->urb_cmd_in = NULL;
	ucs->urb_cmd_out = NULL;
	ucs->rcvbuf = NULL;
	ucs->rcvbuf_size = 0;

	spin_lock_init(&ucs->lock);
	ucs->pending = 0;

	ucs->basstate = 0;
	setup_timer(&ucs->timer_ctrl, req_timeout, (unsigned long) cs);
	setup_timer(&ucs->timer_atrdy, atrdy_timeout, (unsigned long) cs);
	setup_timer(&ucs->timer_cmd_in, cmd_in_timeout, (unsigned long) cs);
	setup_timer(&ucs->timer_int_in, int_in_resubmit, (unsigned long) cs);
	init_waitqueue_head(&ucs->waitqueue);
	INIT_WORK(&ucs->int_in_wq, int_in_work);

	return 1;
}

/* freeurbs
 * unlink and deallocate all URBs unconditionally
 * caller must make sure that no commands are still in progress
 * parameter:
 *	cs	controller state structure
 */
static void freeurbs(struct cardstate *cs)
{
	struct bas_cardstate *ucs = cs->hw.bas;
	struct bas_bc_state *ubc;
	int i, j;

	gig_dbg(DEBUG_INIT, "%s: killing URBs", __func__);
	for (j = 0; j < BAS_CHANNELS; ++j) {
		ubc = cs->bcs[j].hw.bas;
		for (i = 0; i < BAS_OUTURBS; ++i) {
			usb_kill_urb(ubc->isoouturbs[i].urb);
			usb_free_urb(ubc->isoouturbs[i].urb);
			ubc->isoouturbs[i].urb = NULL;
		}
		for (i = 0; i < BAS_INURBS; ++i) {
			usb_kill_urb(ubc->isoinurbs[i]);
			usb_free_urb(ubc->isoinurbs[i]);
			ubc->isoinurbs[i] = NULL;
		}
	}
	usb_kill_urb(ucs->urb_int_in);
	usb_free_urb(ucs->urb_int_in);
	ucs->urb_int_in = NULL;
	usb_kill_urb(ucs->urb_cmd_out);
	usb_free_urb(ucs->urb_cmd_out);
	ucs->urb_cmd_out = NULL;
	usb_kill_urb(ucs->urb_cmd_in);
	usb_free_urb(ucs->urb_cmd_in);
	ucs->urb_cmd_in = NULL;
	usb_kill_urb(ucs->urb_ctrl);
	usb_free_urb(ucs->urb_ctrl);
	ucs->urb_ctrl = NULL;
}

/* gigaset_probe
 * This function is called when a new USB device is connected.
 * It checks whether the new device is handled by this driver.
 */
static int gigaset_probe(struct usb_interface *interface,
			 const struct usb_device_id *id)
{
	struct usb_host_interface *hostif;
	struct usb_device *udev = interface_to_usbdev(interface);
	struct cardstate *cs = NULL;
	struct bas_cardstate *ucs = NULL;
	struct bas_bc_state *ubc;
	struct usb_endpoint_descriptor *endpoint;
	int i, j;
	int rc;

	gig_dbg(DEBUG_INIT,
		"%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)",
		__func__, le16_to_cpu(udev->descriptor.idVendor),
		le16_to_cpu(udev->descriptor.idProduct));

	/* set required alternate setting */
	hostif = interface->cur_altsetting;
	if (hostif->desc.bAlternateSetting != 3) {
		gig_dbg(DEBUG_INIT,
			"%s: wrong alternate setting %d - trying to switch",
			__func__, hostif->desc.bAlternateSetting);
		if (usb_set_interface(udev, hostif->desc.bInterfaceNumber, 3)
		    < 0) {
			dev_warn(&udev->dev, "usb_set_interface failed, "
				 "device %d interface %d altsetting %d\n",
				 udev->devnum, hostif->desc.bInterfaceNumber,
				 hostif->desc.bAlternateSetting);
			return -ENODEV;
		}
		hostif = interface->cur_altsetting;
	}

	/* Reject application specific interfaces
	 */
	if (hostif->desc.bInterfaceClass != 255) {
		dev_warn(&udev->dev, "%s: bInterfaceClass == %d\n",
			 __func__, hostif->desc.bInterfaceClass);
		return -ENODEV;
	}

	dev_info(&udev->dev,
		 "%s: Device matched (Vendor: 0x%x, Product: 0x%x)\n",
		 __func__, le16_to_cpu(udev->descriptor.idVendor),
		 le16_to_cpu(udev->descriptor.idProduct));

	/* allocate memory for our device state and intialize it */
	cs = gigaset_initcs(driver, BAS_CHANNELS, 0, 0, cidmode,
			    GIGASET_MODULENAME);
	if (!cs)
		return -ENODEV;
	ucs = cs->hw.bas;

	/* save off device structure ptrs for later use */
	usb_get_dev(udev);
	ucs->udev = udev;
	ucs->interface = interface;
	cs->dev = &interface->dev;

	/* allocate URBs:
	 * - one for the interrupt pipe
	 * - three for the different uses of the default control pipe
	 * - three for each isochronous pipe
	 */
	if (!(ucs->urb_int_in = usb_alloc_urb(0, GFP_KERNEL)) ||
	    !(ucs->urb_cmd_in = usb_alloc_urb(0, GFP_KERNEL)) ||
	    !(ucs->urb_cmd_out = usb_alloc_urb(0, GFP_KERNEL)) ||
	    !(ucs->urb_ctrl = usb_alloc_urb(0, GFP_KERNEL)))
		goto allocerr;

	for (j = 0; j < BAS_CHANNELS; ++j) {
		ubc = cs->bcs[j].hw.bas;
		for (i = 0; i < BAS_OUTURBS; ++i)
			if (!(ubc->isoouturbs[i].urb =
			      usb_alloc_urb(BAS_NUMFRAMES, GFP_KERNEL)))
				goto allocerr;
		for (i = 0; i < BAS_INURBS; ++i)
			if (!(ubc->isoinurbs[i] =
			      usb_alloc_urb(BAS_NUMFRAMES, GFP_KERNEL)))
				goto allocerr;
	}

	ucs->rcvbuf = NULL;
	ucs->rcvbuf_size = 0;

	/* Fill the interrupt urb and send it to the core */
	endpoint = &hostif->endpoint[0].desc;
	usb_fill_int_urb(ucs->urb_int_in, udev,
			 usb_rcvintpipe(udev,
					(endpoint->bEndpointAddress) & 0x0f),
			 ucs->int_in_buf, IP_MSGSIZE, read_int_callback, cs,
			 endpoint->bInterval);
	rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL);
	if (rc != 0) {
		dev_err(cs->dev, "could not submit interrupt URB: %s\n",
			get_usb_rcmsg(rc));
		goto error;
	}
	ucs->retry_int_in = 0;

	/* tell the device that the driver is ready */
	rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0);
	if (rc != 0)
		goto error;

	/* tell common part that the device is ready */
	if (startmode == SM_LOCKED)
		cs->mstate = MS_LOCKED;

	/* save address of controller structure */
	usb_set_intfdata(interface, cs);

	if (!gigaset_start(cs))
		goto error;

	return 0;

allocerr:
	dev_err(cs->dev, "could not allocate URBs\n");
error:
	freeurbs(cs);
	usb_set_intfdata(interface, NULL);
	gigaset_freecs(cs);
	return -ENODEV;
}

/* gigaset_disconnect
 * This function is called when the Gigaset base is unplugged.
 */
static void gigaset_disconnect(struct usb_interface *interface)
{
	struct cardstate *cs;
	struct bas_cardstate *ucs;
	int j;

	cs = usb_get_intfdata(interface);

	ucs = cs->hw.bas;

	dev_info(cs->dev, "disconnecting Gigaset base\n");

	/* mark base as not ready, all channels disconnected */
	ucs->basstate = 0;

	/* tell LL all channels are down */
	for (j = 0; j < BAS_CHANNELS; ++j)
		gigaset_bchannel_down(cs->bcs + j);

	/* stop driver (common part) */
	gigaset_stop(cs);

	/* stop delayed work and URBs, free ressources */
	del_timer_sync(&ucs->timer_ctrl);
	del_timer_sync(&ucs->timer_atrdy);
	del_timer_sync(&ucs->timer_cmd_in);
	del_timer_sync(&ucs->timer_int_in);
	cancel_work_sync(&ucs->int_in_wq);
	freeurbs(cs);
	usb_set_intfdata(interface, NULL);
	kfree(ucs->rcvbuf);
	ucs->rcvbuf = NULL;
	ucs->rcvbuf_size = 0;
	usb_put_dev(ucs->udev);
	ucs->interface = NULL;
	ucs->udev = NULL;
	cs->dev = NULL;
	gigaset_freecs(cs);
}

/* gigaset_suspend
 * This function is called before the USB connection is suspended.
 */
static int gigaset_suspend(struct usb_interface *intf, pm_message_t message)
{
	struct cardstate *cs = usb_get_intfdata(intf);
	struct bas_cardstate *ucs = cs->hw.bas;
	int rc;

	/* set suspend flag; this stops AT command/response traffic */
	if (update_basstate(ucs, BS_SUSPEND, 0) & BS_SUSPEND) {
		gig_dbg(DEBUG_SUSPEND, "already suspended");
		return 0;
	}

	/* wait a bit for blocking conditions to go away */
	rc = wait_event_timeout(ucs->waitqueue,
			!(ucs->basstate &
			  (BS_B1OPEN|BS_B2OPEN|BS_ATRDPEND|BS_ATWRPEND)),
			BAS_TIMEOUT*HZ/10);
	gig_dbg(DEBUG_SUSPEND, "wait_event_timeout() -> %d", rc);

	/* check for conditions preventing suspend */
	if (ucs->basstate & (BS_B1OPEN|BS_B2OPEN|BS_ATRDPEND|BS_ATWRPEND)) {
		dev_warn(cs->dev, "cannot suspend:\n");
		if (ucs->basstate & BS_B1OPEN)
			dev_warn(cs->dev, " B channel 1 open\n");
		if (ucs->basstate & BS_B2OPEN)
			dev_warn(cs->dev, " B channel 2 open\n");
		if (ucs->basstate & BS_ATRDPEND)
			dev_warn(cs->dev, " receiving AT reply\n");
		if (ucs->basstate & BS_ATWRPEND)
			dev_warn(cs->dev, " sending AT command\n");
		update_basstate(ucs, 0, BS_SUSPEND);
		return -EBUSY;
	}

	/* close AT channel if open */
	if (ucs->basstate & BS_ATOPEN) {
		gig_dbg(DEBUG_SUSPEND, "closing AT channel");
		rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, 0);
		if (rc) {
			update_basstate(ucs, 0, BS_SUSPEND);
			return rc;
		}
		wait_event_timeout(ucs->waitqueue, !ucs->pending,
				   BAS_TIMEOUT*HZ/10);
		/* in case of timeout, proceed anyway */
	}

	/* kill all URBs and delayed work that might still be pending */
	usb_kill_urb(ucs->urb_ctrl);
	usb_kill_urb(ucs->urb_int_in);
	del_timer_sync(&ucs->timer_ctrl);
	del_timer_sync(&ucs->timer_atrdy);
	del_timer_sync(&ucs->timer_cmd_in);
	del_timer_sync(&ucs->timer_int_in);
	cancel_work_sync(&ucs->int_in_wq);

	gig_dbg(DEBUG_SUSPEND, "suspend complete");
	return 0;
}

/* gigaset_resume
 * This function is called after the USB connection has been resumed.
 */
static int gigaset_resume(struct usb_interface *intf)
{
	struct cardstate *cs = usb_get_intfdata(intf);
	struct bas_cardstate *ucs = cs->hw.bas;
	int rc;

	/* resubmit interrupt URB for spontaneous messages from base */
	rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL);
	if (rc) {
		dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
			get_usb_rcmsg(rc));
		return rc;
	}
	ucs->retry_int_in = 0;

	/* clear suspend flag to reallow activity */
	update_basstate(ucs, 0, BS_SUSPEND);

	gig_dbg(DEBUG_SUSPEND, "resume complete");
	return 0;
}

/* gigaset_pre_reset
 * This function is called before the USB connection is reset.
 */
static int gigaset_pre_reset(struct usb_interface *intf)
{
	/* handle just like suspend */
	return gigaset_suspend(intf, PMSG_ON);
}

/* gigaset_post_reset
 * This function is called after the USB connection has been reset.
 */
static int gigaset_post_reset(struct usb_interface *intf)
{
	/* FIXME: send HD_DEVICE_INIT_ACK? */

	/* resume operations */
	return gigaset_resume(intf);
}


static const struct gigaset_ops gigops = {
	gigaset_write_cmd,
	gigaset_write_room,
	gigaset_chars_in_buffer,
	gigaset_brkchars,
	gigaset_init_bchannel,
	gigaset_close_bchannel,
	gigaset_initbcshw,
	gigaset_freebcshw,
	gigaset_reinitbcshw,
	gigaset_initcshw,
	gigaset_freecshw,
	gigaset_set_modem_ctrl,
	gigaset_baud_rate,
	gigaset_set_line_ctrl,
	gigaset_isoc_send_skb,
	gigaset_isoc_input,
};

/* bas_gigaset_init
 * This function is called after the kernel module is loaded.
 */
static int __init bas_gigaset_init(void)
{
	int result;

	/* allocate memory for our driver state and intialize it */
	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
				    GIGASET_MODULENAME, GIGASET_DEVNAME,
				    &gigops, THIS_MODULE);
	if (driver == NULL)
		goto error;

	/* register this driver with the USB subsystem */
	result = usb_register(&gigaset_usb_driver);
	if (result < 0) {
		pr_err("error %d registering USB driver\n", -result);
		goto error;
	}

	pr_info(DRIVER_DESC "\n");
	return 0;

error:
	if (driver)
		gigaset_freedriver(driver);
	driver = NULL;
	return -1;
}

/* bas_gigaset_exit
 * This function is called before the kernel module is unloaded.
 */
static void __exit bas_gigaset_exit(void)
{
	struct bas_cardstate *ucs;
	int i;

	gigaset_blockdriver(driver); /* => probe will fail
				      * => no gigaset_start any more
				      */

	/* stop all connected devices */
	for (i = 0; i < driver->minors; i++) {
		if (gigaset_shutdown(driver->cs + i) < 0)
			continue;		/* no device */
		/* from now on, no isdn callback should be possible */

		/* close all still open channels */
		ucs = driver->cs[i].hw.bas;
		if (ucs->basstate & BS_B1OPEN) {
			gig_dbg(DEBUG_INIT, "closing B1 channel");
			usb_control_msg(ucs->udev,
					usb_sndctrlpipe(ucs->udev, 0),
					HD_CLOSE_B1CHANNEL, OUT_VENDOR_REQ,
					0, 0, NULL, 0, BAS_TIMEOUT);
		}
		if (ucs->basstate & BS_B2OPEN) {
			gig_dbg(DEBUG_INIT, "closing B2 channel");
			usb_control_msg(ucs->udev,
					usb_sndctrlpipe(ucs->udev, 0),
					HD_CLOSE_B2CHANNEL, OUT_VENDOR_REQ,
					0, 0, NULL, 0, BAS_TIMEOUT);
		}
		if (ucs->basstate & BS_ATOPEN) {
			gig_dbg(DEBUG_INIT, "closing AT channel");
			usb_control_msg(ucs->udev,
					usb_sndctrlpipe(ucs->udev, 0),
					HD_CLOSE_ATCHANNEL, OUT_VENDOR_REQ,
					0, 0, NULL, 0, BAS_TIMEOUT);
		}
		ucs->basstate = 0;
	}

	/* deregister this driver with the USB subsystem */
	usb_deregister(&gigaset_usb_driver);
	/* this will call the disconnect-callback */
	/* from now on, no disconnect/probe callback should be running */

	gigaset_freedriver(driver);
	driver = NULL;
}


module_init(bas_gigaset_init);
module_exit(bas_gigaset_exit);

MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");