blob: 02a5345a44a60a0346ba08b31acdc9af6f5c92c6 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001#
2# Block device driver configuration
3#
4
Jan Engelhardtafd44032007-07-17 04:06:11 -07005menuconfig MD
Linus Torvalds1da177e2005-04-16 15:20:36 -07006 bool "Multiple devices driver support (RAID and LVM)"
Jan Engelhardtafd44032007-07-17 04:06:11 -07007 depends on BLOCK
Pranith Kumar83fe27e2014-12-05 11:24:45 -05008 select SRCU
Linus Torvalds1da177e2005-04-16 15:20:36 -07009 help
10 Support multiple physical spindles through a single logical device.
11 Required for RAID and logical volume management.
12
Jan Engelhardtafd44032007-07-17 04:06:11 -070013if MD
14
Linus Torvalds1da177e2005-04-16 15:20:36 -070015config BLK_DEV_MD
16 tristate "RAID support"
Linus Torvalds1da177e2005-04-16 15:20:36 -070017 ---help---
18 This driver lets you combine several hard disk partitions into one
19 logical block device. This can be used to simply append one
20 partition to another one or to combine several redundant hard disks
21 into a RAID1/4/5 device so as to provide protection against hard
22 disk failures. This is called "Software RAID" since the combining of
23 the partitions is done by the kernel. "Hardware RAID" means that the
24 combining is done by a dedicated controller; if you have such a
25 controller, you do not need to say Y here.
26
27 More information about Software RAID on Linux is contained in the
28 Software RAID mini-HOWTO, available from
29 <http://www.tldp.org/docs.html#howto>. There you will also learn
30 where to get the supporting user space utilities raidtools.
31
32 If unsure, say N.
33
Arjan van de Vena3640922008-09-21 15:44:32 -070034config MD_AUTODETECT
35 bool "Autodetect RAID arrays during kernel boot"
Alan Jenkinsce52aeb2008-10-10 16:02:53 +010036 depends on BLK_DEV_MD=y
Arjan van de Vena3640922008-09-21 15:44:32 -070037 default y
38 ---help---
39 If you say Y here, then the kernel will try to autodetect raid
40 arrays as part of its boot process.
41
42 If you don't use raid and say Y, this autodetection can cause
43 a several-second delay in the boot time due to various
44 synchronisation steps that are part of this step.
45
46 If unsure, say Y.
47
Linus Torvalds1da177e2005-04-16 15:20:36 -070048config MD_LINEAR
49 tristate "Linear (append) mode"
50 depends on BLK_DEV_MD
51 ---help---
52 If you say Y here, then your multiple devices driver will be able to
53 use the so-called linear mode, i.e. it will combine the hard disk
54 partitions by simply appending one to the other.
55
56 To compile this as a module, choose M here: the module
57 will be called linear.
58
59 If unsure, say Y.
60
61config MD_RAID0
62 tristate "RAID-0 (striping) mode"
63 depends on BLK_DEV_MD
64 ---help---
65 If you say Y here, then your multiple devices driver will be able to
66 use the so-called raid0 mode, i.e. it will combine the hard disk
67 partitions into one logical device in such a fashion as to fill them
68 up evenly, one chunk here and one chunk there. This will increase
69 the throughput rate if the partitions reside on distinct disks.
70
71 Information about Software RAID on Linux is contained in the
72 Software-RAID mini-HOWTO, available from
73 <http://www.tldp.org/docs.html#howto>. There you will also
74 learn where to get the supporting user space utilities raidtools.
75
76 To compile this as a module, choose M here: the module
77 will be called raid0.
78
79 If unsure, say Y.
80
81config MD_RAID1
82 tristate "RAID-1 (mirroring) mode"
83 depends on BLK_DEV_MD
84 ---help---
85 A RAID-1 set consists of several disk drives which are exact copies
86 of each other. In the event of a mirror failure, the RAID driver
87 will continue to use the operational mirrors in the set, providing
88 an error free MD (multiple device) to the higher levels of the
89 kernel. In a set with N drives, the available space is the capacity
90 of a single drive, and the set protects against a failure of (N - 1)
91 drives.
92
93 Information about Software RAID on Linux is contained in the
94 Software-RAID mini-HOWTO, available from
95 <http://www.tldp.org/docs.html#howto>. There you will also
96 learn where to get the supporting user space utilities raidtools.
97
98 If you want to use such a RAID-1 set, say Y. To compile this code
99 as a module, choose M here: the module will be called raid1.
100
101 If unsure, say Y.
102
103config MD_RAID10
NeilBrown08fb7302010-05-03 13:16:56 +1000104 tristate "RAID-10 (mirrored striping) mode"
105 depends on BLK_DEV_MD
Linus Torvalds1da177e2005-04-16 15:20:36 -0700106 ---help---
107 RAID-10 provides a combination of striping (RAID-0) and
Justin Piszcz4d2554d2006-06-26 00:27:50 -0700108 mirroring (RAID-1) with easier configuration and more flexible
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109 layout.
110 Unlike RAID-0, but like RAID-1, RAID-10 requires all devices to
111 be the same size (or at least, only as much as the smallest device
112 will be used).
113 RAID-10 provides a variety of layouts that provide different levels
114 of redundancy and performance.
115
116 RAID-10 requires mdadm-1.7.0 or later, available at:
117
118 ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/
119
120 If unsure, say Y.
121
NeilBrown16a53ec2006-06-26 00:27:38 -0700122config MD_RAID456
123 tristate "RAID-4/RAID-5/RAID-6 mode"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700124 depends on BLK_DEV_MD
David Woodhousef5e70d02009-07-13 11:35:12 +0100125 select RAID6_PQ
Arnd Bergmann14f09e22015-11-03 15:12:01 +0100126 select LIBCRC32C
Dan Williams9bc89cd2007-01-02 11:10:44 -0700127 select ASYNC_MEMCPY
128 select ASYNC_XOR
Dan Williamsac6b53b2009-07-14 13:40:19 -0700129 select ASYNC_PQ
130 select ASYNC_RAID6_RECOV
Linus Torvalds1da177e2005-04-16 15:20:36 -0700131 ---help---
132 A RAID-5 set of N drives with a capacity of C MB per drive provides
133 the capacity of C * (N - 1) MB, and protects against a failure
134 of a single drive. For a given sector (row) number, (N - 1) drives
135 contain data sectors, and one drive contains the parity protection.
136 For a RAID-4 set, the parity blocks are present on a single drive,
137 while a RAID-5 set distributes the parity across the drives in one
138 of the available parity distribution methods.
139
NeilBrown16a53ec2006-06-26 00:27:38 -0700140 A RAID-6 set of N drives with a capacity of C MB per drive
141 provides the capacity of C * (N - 2) MB, and protects
142 against a failure of any two drives. For a given sector
143 (row) number, (N - 2) drives contain data sectors, and two
144 drives contains two independent redundancy syndromes. Like
145 RAID-5, RAID-6 distributes the syndromes across the drives
146 in one of the available parity distribution methods.
147
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148 Information about Software RAID on Linux is contained in the
149 Software-RAID mini-HOWTO, available from
150 <http://www.tldp.org/docs.html#howto>. There you will also
151 learn where to get the supporting user space utilities raidtools.
152
NeilBrown16a53ec2006-06-26 00:27:38 -0700153 If you want to use such a RAID-4/RAID-5/RAID-6 set, say Y. To
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154 compile this code as a module, choose M here: the module
NeilBrown16a53ec2006-06-26 00:27:38 -0700155 will be called raid456.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700156
157 If unsure, say Y.
158
Linus Torvalds1da177e2005-04-16 15:20:36 -0700159config MD_MULTIPATH
160 tristate "Multipath I/O support"
161 depends on BLK_DEV_MD
162 help
NeilBrown93bd89a62009-12-14 12:49:59 +1100163 MD_MULTIPATH provides a simple multi-path personality for use
164 the MD framework. It is not under active development. New
165 projects should consider using DM_MULTIPATH which has more
166 features and more testing.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700167
168 If unsure, say N.
169
170config MD_FAULTY
171 tristate "Faulty test module for MD"
172 depends on BLK_DEV_MD
173 help
174 The "faulty" module allows for a block device that occasionally returns
175 read or write errors. It is useful for testing.
176
177 In unsure, say N.
178
Goldwyn Rodrigues8e854e92014-03-07 11:21:15 -0600179
180config MD_CLUSTER
181 tristate "Cluster Support for MD (EXPERIMENTAL)"
182 depends on BLK_DEV_MD
183 depends on DLM
184 default n
185 ---help---
186 Clustering support for MD devices. This enables locking and
187 synchronization across multiple systems on the cluster, so all
188 nodes in the cluster can access the MD devices simultaneously.
189
190 This brings the redundancy (and uptime) of RAID levels across the
191 nodes of the cluster.
192
193 If unsure, say N.
194
Kent Overstreetcafe5632013-03-23 16:11:31 -0700195source "drivers/md/bcache/Kconfig"
196
Mikulas Patocka2995fa72014-01-13 19:37:54 -0500197config BLK_DEV_DM_BUILTIN
Christoph Jaeger6341e622014-12-20 15:41:11 -0500198 bool
Mikulas Patocka2995fa72014-01-13 19:37:54 -0500199
Linus Torvalds1da177e2005-04-16 15:20:36 -0700200config BLK_DEV_DM
201 tristate "Device mapper support"
Mikulas Patocka2995fa72014-01-13 19:37:54 -0500202 select BLK_DEV_DM_BUILTIN
Linus Torvalds1da177e2005-04-16 15:20:36 -0700203 ---help---
204 Device-mapper is a low level volume manager. It works by allowing
205 people to specify mappings for ranges of logical sectors. Various
206 mapping types are available, in addition people may write their own
207 modules containing custom mappings if they wish.
208
209 Higher level volume managers such as LVM2 use this driver.
210
211 To compile this as a module, choose M here: the module will be
212 called dm-mod.
213
214 If unsure, say N.
215
Mike Snitzer17e149b2015-03-11 15:01:09 -0400216config DM_MQ_DEFAULT
217 bool "request-based DM: use blk-mq I/O path by default"
218 depends on BLK_DEV_DM
219 ---help---
220 This option enables the blk-mq based I/O path for request-based
221 DM devices by default. With the option the dm_mod.use_blk_mq
222 module/boot option defaults to Y, without it to N, but it can
223 still be overriden either way.
224
225 If unsure say N.
226
Bryn Reevescc109202006-10-03 01:15:35 -0700227config DM_DEBUG
Christoph Jaeger6341e622014-12-20 15:41:11 -0500228 bool "Device mapper debugging support"
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000229 depends on BLK_DEV_DM
Bryn Reevescc109202006-10-03 01:15:35 -0700230 ---help---
231 Enable this for messages that may help debug device-mapper problems.
232
233 If unsure, say N.
234
Mikulas Patocka95d402f2011-10-31 20:19:09 +0000235config DM_BUFIO
236 tristate
Alasdair G Kergond57916a2013-03-01 22:45:46 +0000237 depends on BLK_DEV_DM
Mikulas Patocka95d402f2011-10-31 20:19:09 +0000238 ---help---
239 This interface allows you to do buffered I/O on a device and acts
240 as a cache, holding recently-read blocks in memory and performing
241 delayed writes.
242
Mikulas Patocka86bad0c2015-11-23 19:20:06 -0500243config DM_DEBUG_BLOCK_STACK_TRACING
244 bool "Keep stack trace of persistent data block lock holders"
245 depends on STACKTRACE_SUPPORT && DM_BUFIO
246 select STACKTRACE
247 ---help---
248 Enable this for messages that may help debug problems with the
249 block manager locking used by thin provisioning and caching.
250
251 If unsure, say N.
Mike Snitzer3f068042016-03-04 14:37:16 -0500252
Mike Snitzer4f81a412012-10-12 21:02:13 +0100253config DM_BIO_PRISON
254 tristate
Alasdair G Kergond57916a2013-03-01 22:45:46 +0000255 depends on BLK_DEV_DM
Mike Snitzer4f81a412012-10-12 21:02:13 +0100256 ---help---
257 Some bio locking schemes used by other device-mapper targets
258 including thin provisioning.
259
Joe Thornber991d9fa2011-10-31 20:21:18 +0000260source "drivers/md/persistent-data/Kconfig"
261
Linus Torvalds1da177e2005-04-16 15:20:36 -0700262config DM_CRYPT
263 tristate "Crypt target support"
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000264 depends on BLK_DEV_DM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700265 select CRYPTO
Herbert Xu32632632006-12-10 09:50:36 +1100266 select CRYPTO_CBC
Linus Torvalds1da177e2005-04-16 15:20:36 -0700267 ---help---
268 This device-mapper target allows you to create a device that
269 transparently encrypts the data on it. You'll need to activate
270 the ciphers you're going to use in the cryptoapi configuration.
271
Loic Pefferkorncf352482014-12-15 22:18:43 +0100272 For further information on dm-crypt and userspace tools see:
Baruch Siach6ed443c2015-07-05 09:55:44 +0300273 <https://gitlab.com/cryptsetup/cryptsetup/wikis/DMCrypt>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700274
275 To compile this code as a module, choose M here: the module will
276 be called dm-crypt.
277
278 If unsure, say N.
279
280config DM_SNAPSHOT
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000281 tristate "Snapshot target"
282 depends on BLK_DEV_DM
Mikulas Patocka55494bf2014-01-13 19:12:36 -0500283 select DM_BUFIO
Linus Torvalds1da177e2005-04-16 15:20:36 -0700284 ---help---
Justin Piszcz4d2554d2006-06-26 00:27:50 -0700285 Allow volume managers to take writable snapshots of a device.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700286
Joe Thornber991d9fa2011-10-31 20:21:18 +0000287config DM_THIN_PROVISIONING
Alasdair G Kergond57916a2013-03-01 22:45:46 +0000288 tristate "Thin provisioning target"
289 depends on BLK_DEV_DM
Joe Thornber991d9fa2011-10-31 20:21:18 +0000290 select DM_PERSISTENT_DATA
Mike Snitzer4f81a412012-10-12 21:02:13 +0100291 select DM_BIO_PRISON
Joe Thornber991d9fa2011-10-31 20:21:18 +0000292 ---help---
293 Provides thin provisioning and snapshots that share a data store.
294
Joe Thornberc6b4fcb2013-03-01 22:45:51 +0000295config DM_CACHE
296 tristate "Cache target (EXPERIMENTAL)"
297 depends on BLK_DEV_DM
298 default n
299 select DM_PERSISTENT_DATA
300 select DM_BIO_PRISON
301 ---help---
302 dm-cache attempts to improve performance of a block device by
303 moving frequently used data to a smaller, higher performance
304 device. Different 'policy' plugins can be used to change the
305 algorithms used to select which blocks are promoted, demoted,
306 cleaned etc. It supports writeback and writethrough modes.
307
Joe Thornber66a63632015-05-15 15:33:34 +0100308config DM_CACHE_SMQ
309 tristate "Stochastic MQ Cache Policy (EXPERIMENTAL)"
310 depends on DM_CACHE
311 default y
312 ---help---
313 A cache policy that uses a multiqueue ordered by recent hits
314 to select which blocks should be promoted and demoted.
315 This is meant to be a general purpose policy. It prioritises
316 reads over writes. This SMQ policy (vs MQ) offers the promise
317 of less memory utilization, improved performance and increased
318 adaptability in the face of changing workloads.
319
Heinz Mauelshagen8735a812013-03-01 22:45:52 +0000320config DM_CACHE_CLEANER
321 tristate "Cleaner Cache Policy (EXPERIMENTAL)"
322 depends on DM_CACHE
323 default y
324 ---help---
325 A simple cache policy that writes back all data to the
326 origin. Used when decommissioning a dm-cache.
327
Joe Thornbereec40572014-03-03 10:23:15 -0500328config DM_ERA
329 tristate "Era target (EXPERIMENTAL)"
330 depends on BLK_DEV_DM
331 default n
332 select DM_PERSISTENT_DATA
333 select DM_BIO_PRISON
334 ---help---
335 dm-era tracks which parts of a block device are written to
336 over time. Useful for maintaining cache coherency when using
337 vendor snapshots.
338
Linus Torvalds1da177e2005-04-16 15:20:36 -0700339config DM_MIRROR
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000340 tristate "Mirror target"
341 depends on BLK_DEV_DM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700342 ---help---
343 Allow volume managers to mirror logical volumes, also
344 needed for live data migration tools such as 'pvmove'.
345
Mikulas Patocka54428512013-11-08 10:47:12 -0500346config DM_LOG_USERSPACE
347 tristate "Mirror userspace logging"
348 depends on DM_MIRROR && NET
349 select CONNECTOR
350 ---help---
351 The userspace logging module provides a mechanism for
352 relaying the dm-dirty-log API to userspace. Log designs
353 which are more suited to userspace implementation (e.g.
354 shared storage logs) or experimental logs can be implemented
355 by leveraging this framework.
356
NeilBrown9d09e662011-01-13 20:00:02 +0000357config DM_RAID
NeilBrownd9f691c2012-08-02 08:35:43 +1000358 tristate "RAID 1/4/5/6/10 target"
Alasdair G Kergon035220b2012-03-28 18:41:24 +0100359 depends on BLK_DEV_DM
Jonathan Brassowb12d4372011-08-02 12:32:07 +0100360 select MD_RAID1
NeilBrownd9f691c2012-08-02 08:35:43 +1000361 select MD_RAID10
NeilBrown9d09e662011-01-13 20:00:02 +0000362 select MD_RAID456
363 select BLK_DEV_MD
364 ---help---
NeilBrownd9f691c2012-08-02 08:35:43 +1000365 A dm target that supports RAID1, RAID10, RAID4, RAID5 and RAID6 mappings
NeilBrown9d09e662011-01-13 20:00:02 +0000366
367 A RAID-5 set of N drives with a capacity of C MB per drive provides
368 the capacity of C * (N - 1) MB, and protects against a failure
369 of a single drive. For a given sector (row) number, (N - 1) drives
370 contain data sectors, and one drive contains the parity protection.
371 For a RAID-4 set, the parity blocks are present on a single drive,
372 while a RAID-5 set distributes the parity across the drives in one
373 of the available parity distribution methods.
374
375 A RAID-6 set of N drives with a capacity of C MB per drive
376 provides the capacity of C * (N - 2) MB, and protects
377 against a failure of any two drives. For a given sector
378 (row) number, (N - 2) drives contain data sectors, and two
379 drives contains two independent redundancy syndromes. Like
380 RAID-5, RAID-6 distributes the syndromes across the drives
381 in one of the available parity distribution methods.
382
Linus Torvalds1da177e2005-04-16 15:20:36 -0700383config DM_ZERO
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000384 tristate "Zero target"
385 depends on BLK_DEV_DM
Linus Torvalds1da177e2005-04-16 15:20:36 -0700386 ---help---
387 A target that discards writes, and returns all zeroes for
388 reads. Useful in some recovery situations.
389
390config DM_MULTIPATH
Alasdair G Kergon0149e572008-02-08 02:10:32 +0000391 tristate "Multipath target"
392 depends on BLK_DEV_DM
Chandra Seetharamanfe9233f2008-05-23 18:16:40 -0700393 # nasty syntax but means make DM_MULTIPATH independent
394 # of SCSI_DH if the latter isn't defined but if
395 # it is, DM_MULTIPATH must depend on it. We get a build
396 # error if SCSI_DH=m and DM_MULTIPATH=y
Christoph Hellwig294ab782015-09-09 18:04:18 +0200397 depends on !SCSI_DH || SCSI
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398 ---help---
399 Allow volume managers to support multipath hardware.
400
Kiyoshi Uedafd5e0332009-06-22 10:12:27 +0100401config DM_MULTIPATH_QL
402 tristate "I/O Path Selector based on the number of in-flight I/Os"
403 depends on DM_MULTIPATH
404 ---help---
405 This path selector is a dynamic load balancer which selects
406 the path with the least number of in-flight I/Os.
407
408 If unsure, say N.
409
Kiyoshi Uedaf392ba82009-06-22 10:12:28 +0100410config DM_MULTIPATH_ST
411 tristate "I/O Path Selector based on the service time"
412 depends on DM_MULTIPATH
413 ---help---
414 This path selector is a dynamic load balancer which selects
415 the path expected to complete the incoming I/O in the shortest
416 time.
417
418 If unsure, say N.
419
Heinz Mauelshagen26b9f222007-05-09 02:33:06 -0700420config DM_DELAY
Alasdair G Kergond57916a2013-03-01 22:45:46 +0000421 tristate "I/O delaying target"
422 depends on BLK_DEV_DM
Heinz Mauelshagen26b9f222007-05-09 02:33:06 -0700423 ---help---
424 A target that delays reads and/or writes and can send
425 them to different devices. Useful for testing.
426
427 If unsure, say N.
428
Mike Anderson51e5b2b2007-10-19 22:48:00 +0100429config DM_UEVENT
Alasdair G Kergone0b215d2012-03-28 18:41:24 +0100430 bool "DM uevents"
431 depends on BLK_DEV_DM
Mike Anderson51e5b2b2007-10-19 22:48:00 +0100432 ---help---
433 Generate udev events for DM events.
434
Josef Bacik3407ef52011-03-24 13:54:24 +0000435config DM_FLAKEY
Alasdair G Kergond57916a2013-03-01 22:45:46 +0000436 tristate "Flakey target"
437 depends on BLK_DEV_DM
Josef Bacik3407ef52011-03-24 13:54:24 +0000438 ---help---
439 A target that intermittently fails I/O for debugging purposes.
440
Mikulas Patockaa4ffc152012-03-28 18:43:38 +0100441config DM_VERITY
Alasdair G Kergond57916a2013-03-01 22:45:46 +0000442 tristate "Verity target support"
443 depends on BLK_DEV_DM
Mikulas Patockaa4ffc152012-03-28 18:43:38 +0100444 select CRYPTO
445 select CRYPTO_HASH
446 select DM_BUFIO
447 ---help---
448 This device-mapper target creates a read-only device that
449 transparently validates the data on one underlying device against
450 a pre-generated tree of cryptographic checksums stored on a second
451 device.
452
453 You'll need to activate the digests you're going to use in the
454 cryptoapi configuration.
455
456 To compile this code as a module, choose M here: the module will
457 be called dm-verity.
458
459 If unsure, say N.
460
Sami Tolvanena739ff32015-12-03 14:26:30 +0000461config DM_VERITY_FEC
462 bool "Verity forward error correction support"
463 depends on DM_VERITY
464 select REED_SOLOMON
465 select REED_SOLOMON_DEC8
466 ---help---
467 Add forward error correction support to dm-verity. This option
468 makes it possible to use pre-generated error correction data to
469 recover from corrupted blocks.
470
471 If unsure, say N.
472
Jim Ramsay9d0eb0a2013-07-10 23:41:19 +0100473config DM_SWITCH
474 tristate "Switch target support (EXPERIMENTAL)"
475 depends on BLK_DEV_DM
476 ---help---
477 This device-mapper target creates a device that supports an arbitrary
478 mapping of fixed-size regions of I/O across a fixed set of paths.
479 The path used for any specific region can be switched dynamically
480 by sending the target a message.
481
482 To compile this code as a module, choose M here: the module will
483 be called dm-switch.
484
485 If unsure, say N.
486
Josef Bacik0e9cebe2015-03-20 10:50:37 -0400487config DM_LOG_WRITES
488 tristate "Log writes target support"
489 depends on BLK_DEV_DM
490 ---help---
491 This device-mapper target takes two devices, one device to use
492 normally, one to log all write operations done to the first device.
493 This is for use by file system developers wishing to verify that
Geert Uytterhoeven57d42482015-07-06 15:39:17 +0200494 their fs is writing a consistent file system at all times by allowing
Josef Bacik0e9cebe2015-03-20 10:50:37 -0400495 them to replay the log in a variety of ways and to check the
496 contents.
497
498 To compile this code as a module, choose M here: the module will
499 be called dm-log-writes.
500
501 If unsure, say N.
502
Jan Engelhardtafd44032007-07-17 04:06:11 -0700503endif # MD