Alan Tull | e5f8efa | 2016-11-01 14:14:30 -0500 | [diff] [blame] | 1 | /* |
| 2 | * FPGA to SDRAM Bridge Driver for Altera SoCFPGA Devices |
| 3 | * |
| 4 | * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify it |
| 7 | * under the terms and conditions of the GNU General Public License, |
| 8 | * version 2, as published by the Free Software Foundation. |
| 9 | * |
| 10 | * This program is distributed in the hope it will be useful, but WITHOUT |
| 11 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 12 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 13 | * more details. |
| 14 | * |
| 15 | * You should have received a copy of the GNU General Public License along with |
| 16 | * this program. If not, see <http://www.gnu.org/licenses/>. |
| 17 | */ |
| 18 | |
| 19 | /* |
| 20 | * This driver manages a bridge between an FPGA and the SDRAM used by the ARM |
| 21 | * host processor system (HPS). |
| 22 | * |
| 23 | * The bridge contains 4 read ports, 4 write ports, and 6 command ports. |
| 24 | * Reconfiguring these ports requires that no SDRAM transactions occur during |
| 25 | * reconfiguration. The code reconfiguring the ports cannot run out of SDRAM |
| 26 | * nor can the FPGA access the SDRAM during reconfiguration. This driver does |
| 27 | * not support reconfiguring the ports. The ports are configured by code |
| 28 | * running out of on chip ram before Linux is started and the configuration |
| 29 | * is passed in a handoff register in the system manager. |
| 30 | * |
| 31 | * This driver supports enabling and disabling of the configured ports, which |
| 32 | * allows for safe reprogramming of the FPGA, assuming that the new FPGA image |
| 33 | * uses the same port configuration. Bridges must be disabled before |
| 34 | * reprogramming the FPGA and re-enabled after the FPGA has been programmed. |
| 35 | */ |
| 36 | |
| 37 | #include <linux/fpga/fpga-bridge.h> |
| 38 | #include <linux/kernel.h> |
| 39 | #include <linux/mfd/syscon.h> |
| 40 | #include <linux/module.h> |
| 41 | #include <linux/of_platform.h> |
| 42 | #include <linux/regmap.h> |
| 43 | |
| 44 | #define ALT_SDR_CTL_FPGAPORTRST_OFST 0x80 |
| 45 | #define ALT_SDR_CTL_FPGAPORTRST_PORTRSTN_MSK 0x00003fff |
| 46 | #define ALT_SDR_CTL_FPGAPORTRST_RD_SHIFT 0 |
| 47 | #define ALT_SDR_CTL_FPGAPORTRST_WR_SHIFT 4 |
| 48 | #define ALT_SDR_CTL_FPGAPORTRST_CTRL_SHIFT 8 |
| 49 | |
| 50 | /* |
| 51 | * From the Cyclone V HPS Memory Map document: |
| 52 | * These registers are used to store handoff information between the |
| 53 | * preloader and the OS. These 8 registers can be used to store any |
| 54 | * information. The contents of these registers have no impact on |
| 55 | * the state of the HPS hardware. |
| 56 | */ |
| 57 | #define SYSMGR_ISWGRP_HANDOFF3 (0x8C) |
| 58 | |
| 59 | #define F2S_BRIDGE_NAME "fpga2sdram" |
| 60 | |
| 61 | struct alt_fpga2sdram_data { |
| 62 | struct device *dev; |
| 63 | struct regmap *sdrctl; |
| 64 | int mask; |
| 65 | }; |
| 66 | |
| 67 | static int alt_fpga2sdram_enable_show(struct fpga_bridge *bridge) |
| 68 | { |
| 69 | struct alt_fpga2sdram_data *priv = bridge->priv; |
| 70 | int value; |
| 71 | |
| 72 | regmap_read(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST, &value); |
| 73 | |
| 74 | return (value & priv->mask) == priv->mask; |
| 75 | } |
| 76 | |
| 77 | static inline int _alt_fpga2sdram_enable_set(struct alt_fpga2sdram_data *priv, |
| 78 | bool enable) |
| 79 | { |
| 80 | return regmap_update_bits(priv->sdrctl, ALT_SDR_CTL_FPGAPORTRST_OFST, |
| 81 | priv->mask, enable ? priv->mask : 0); |
| 82 | } |
| 83 | |
| 84 | static int alt_fpga2sdram_enable_set(struct fpga_bridge *bridge, bool enable) |
| 85 | { |
| 86 | return _alt_fpga2sdram_enable_set(bridge->priv, enable); |
| 87 | } |
| 88 | |
| 89 | struct prop_map { |
| 90 | char *prop_name; |
| 91 | u32 *prop_value; |
| 92 | u32 prop_max; |
| 93 | }; |
| 94 | |
| 95 | static const struct fpga_bridge_ops altera_fpga2sdram_br_ops = { |
| 96 | .enable_set = alt_fpga2sdram_enable_set, |
| 97 | .enable_show = alt_fpga2sdram_enable_show, |
| 98 | }; |
| 99 | |
| 100 | static const struct of_device_id altera_fpga_of_match[] = { |
| 101 | { .compatible = "altr,socfpga-fpga2sdram-bridge" }, |
| 102 | {}, |
| 103 | }; |
| 104 | |
| 105 | static int alt_fpga_bridge_probe(struct platform_device *pdev) |
| 106 | { |
| 107 | struct device *dev = &pdev->dev; |
| 108 | struct alt_fpga2sdram_data *priv; |
| 109 | u32 enable; |
| 110 | struct regmap *sysmgr; |
| 111 | int ret = 0; |
| 112 | |
| 113 | priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| 114 | if (!priv) |
| 115 | return -ENOMEM; |
| 116 | |
| 117 | priv->dev = dev; |
| 118 | |
| 119 | priv->sdrctl = syscon_regmap_lookup_by_compatible("altr,sdr-ctl"); |
| 120 | if (IS_ERR(priv->sdrctl)) { |
| 121 | dev_err(dev, "regmap for altr,sdr-ctl lookup failed.\n"); |
| 122 | return PTR_ERR(priv->sdrctl); |
| 123 | } |
| 124 | |
| 125 | sysmgr = syscon_regmap_lookup_by_compatible("altr,sys-mgr"); |
Dan Carpenter | 96bc8183 | 2016-11-16 19:54:40 -0600 | [diff] [blame] | 126 | if (IS_ERR(sysmgr)) { |
Alan Tull | e5f8efa | 2016-11-01 14:14:30 -0500 | [diff] [blame] | 127 | dev_err(dev, "regmap for altr,sys-mgr lookup failed.\n"); |
| 128 | return PTR_ERR(sysmgr); |
| 129 | } |
| 130 | |
| 131 | /* Get f2s bridge configuration saved in handoff register */ |
| 132 | regmap_read(sysmgr, SYSMGR_ISWGRP_HANDOFF3, &priv->mask); |
| 133 | |
| 134 | ret = fpga_bridge_register(dev, F2S_BRIDGE_NAME, |
| 135 | &altera_fpga2sdram_br_ops, priv); |
| 136 | if (ret) |
| 137 | return ret; |
| 138 | |
| 139 | dev_info(dev, "driver initialized with handoff %08x\n", priv->mask); |
| 140 | |
| 141 | if (!of_property_read_u32(dev->of_node, "bridge-enable", &enable)) { |
| 142 | if (enable > 1) { |
| 143 | dev_warn(dev, "invalid bridge-enable %u > 1\n", enable); |
| 144 | } else { |
| 145 | dev_info(dev, "%s bridge\n", |
| 146 | (enable ? "enabling" : "disabling")); |
| 147 | ret = _alt_fpga2sdram_enable_set(priv, enable); |
| 148 | if (ret) { |
| 149 | fpga_bridge_unregister(&pdev->dev); |
| 150 | return ret; |
| 151 | } |
| 152 | } |
| 153 | } |
| 154 | |
| 155 | return ret; |
| 156 | } |
| 157 | |
| 158 | static int alt_fpga_bridge_remove(struct platform_device *pdev) |
| 159 | { |
| 160 | fpga_bridge_unregister(&pdev->dev); |
| 161 | |
| 162 | return 0; |
| 163 | } |
| 164 | |
| 165 | MODULE_DEVICE_TABLE(of, altera_fpga_of_match); |
| 166 | |
| 167 | static struct platform_driver altera_fpga_driver = { |
| 168 | .probe = alt_fpga_bridge_probe, |
| 169 | .remove = alt_fpga_bridge_remove, |
| 170 | .driver = { |
| 171 | .name = "altera_fpga2sdram_bridge", |
| 172 | .of_match_table = of_match_ptr(altera_fpga_of_match), |
| 173 | }, |
| 174 | }; |
| 175 | |
| 176 | module_platform_driver(altera_fpga_driver); |
| 177 | |
| 178 | MODULE_DESCRIPTION("Altera SoCFPGA FPGA to SDRAM Bridge"); |
| 179 | MODULE_AUTHOR("Alan Tull <atull@opensource.altera.com>"); |
| 180 | MODULE_LICENSE("GPL v2"); |