blob: a58bcc069c54f5a6dcc4ccca7e7821f4163bd279 [file] [log] [blame]
Richard Zhu9e54eae2013-07-24 14:15:29 +08001/*
Richard Zhu8b789d82013-10-15 10:44:54 +08002 * copyright (c) 2013 Freescale Semiconductor, Inc.
Richard Zhu9e54eae2013-07-24 14:15:29 +08003 * Freescale IMX AHCI SATA platform driver
Richard Zhu9e54eae2013-07-24 14:15:29 +08004 *
5 * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms and conditions of the GNU General Public License,
9 * version 2, as published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * more details.
15 *
16 * You should have received a copy of the GNU General Public License along with
17 * this program. If not, see <http://www.gnu.org/licenses/>.
18 */
19
20#include <linux/kernel.h>
21#include <linux/module.h>
22#include <linux/platform_device.h>
23#include <linux/regmap.h>
24#include <linux/ahci_platform.h>
25#include <linux/of_device.h>
26#include <linux/mfd/syscon.h>
27#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
Richard Zhu8b789d82013-10-15 10:44:54 +080028#include <linux/libata.h>
Csaba Kertesz54643a82016-10-25 22:08:07 +020029#include <linux/hwmon.h>
30#include <linux/hwmon-sysfs.h>
31#include <linux/thermal.h>
Richard Zhu9e54eae2013-07-24 14:15:29 +080032#include "ahci.h"
33
Akinobu Mita018d5ef2015-01-29 08:30:29 +090034#define DRV_NAME "ahci-imx"
35
Richard Zhu9e54eae2013-07-24 14:15:29 +080036enum {
Shawn Guo24a9ad52014-05-04 21:48:05 +080037 /* Timer 1-ms Register */
38 IMX_TIMER1MS = 0x00e0,
39 /* Port0 PHY Control Register */
40 IMX_P0PHYCR = 0x0178,
41 IMX_P0PHYCR_TEST_PDDQ = 1 << 20,
Shawn Guoe783c512014-05-04 21:48:06 +080042 IMX_P0PHYCR_CR_READ = 1 << 19,
43 IMX_P0PHYCR_CR_WRITE = 1 << 18,
44 IMX_P0PHYCR_CR_CAP_DATA = 1 << 17,
45 IMX_P0PHYCR_CR_CAP_ADDR = 1 << 16,
46 /* Port0 PHY Status Register */
47 IMX_P0PHYSR = 0x017c,
48 IMX_P0PHYSR_CR_ACK = 1 << 18,
49 IMX_P0PHYSR_CR_DATA_OUT = 0xffff << 0,
50 /* Lane0 Output Status Register */
51 IMX_LANE0_OUT_STAT = 0x2003,
52 IMX_LANE0_OUT_STAT_RX_PLL_STATE = 1 << 1,
53 /* Clock Reset Register */
54 IMX_CLOCK_RESET = 0x7f3f,
55 IMX_CLOCK_RESET_RESET = 1 << 0,
Richard Zhu9e54eae2013-07-24 14:15:29 +080056};
57
Marek Vasut4a23d172013-11-25 09:47:02 +010058enum ahci_imx_type {
59 AHCI_IMX53,
60 AHCI_IMX6Q,
61};
62
Richard Zhu9e54eae2013-07-24 14:15:29 +080063struct imx_ahci_priv {
64 struct platform_device *ahci_pdev;
Marek Vasut4a23d172013-11-25 09:47:02 +010065 enum ahci_imx_type type;
Shawn Guoe6dd42a2014-05-28 23:05:39 +080066 struct clk *sata_clk;
67 struct clk *sata_ref_clk;
Richard Zhu9e54eae2013-07-24 14:15:29 +080068 struct clk *ahb_clk;
69 struct regmap *gpr;
Richard Zhu8b789d82013-10-15 10:44:54 +080070 bool no_device;
71 bool first_time;
Russell King29e69412014-06-24 11:19:37 +010072 u32 phy_params;
Richard Zhu8b789d82013-10-15 10:44:54 +080073};
74
75static int ahci_imx_hotplug;
76module_param_named(hotplug, ahci_imx_hotplug, int, 0644);
77MODULE_PARM_DESC(hotplug, "AHCI IMX hot-plug support (0=Don't support, 1=support)");
78
Hans de Goede90870d72014-02-22 16:53:37 +010079static void ahci_imx_host_stop(struct ata_host *host);
80
Shawn Guoe783c512014-05-04 21:48:06 +080081static int imx_phy_crbit_assert(void __iomem *mmio, u32 bit, bool assert)
82{
83 int timeout = 10;
84 u32 crval;
85 u32 srval;
86
87 /* Assert or deassert the bit */
88 crval = readl(mmio + IMX_P0PHYCR);
89 if (assert)
90 crval |= bit;
91 else
92 crval &= ~bit;
93 writel(crval, mmio + IMX_P0PHYCR);
94
95 /* Wait for the cr_ack signal */
96 do {
97 srval = readl(mmio + IMX_P0PHYSR);
98 if ((assert ? srval : ~srval) & IMX_P0PHYSR_CR_ACK)
99 break;
100 usleep_range(100, 200);
101 } while (--timeout);
102
103 return timeout ? 0 : -ETIMEDOUT;
104}
105
106static int imx_phy_reg_addressing(u16 addr, void __iomem *mmio)
107{
108 u32 crval = addr;
109 int ret;
110
111 /* Supply the address on cr_data_in */
112 writel(crval, mmio + IMX_P0PHYCR);
113
114 /* Assert the cr_cap_addr signal */
115 ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, true);
116 if (ret)
117 return ret;
118
119 /* Deassert cr_cap_addr */
120 ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_ADDR, false);
121 if (ret)
122 return ret;
123
124 return 0;
125}
126
127static int imx_phy_reg_write(u16 val, void __iomem *mmio)
128{
129 u32 crval = val;
130 int ret;
131
132 /* Supply the data on cr_data_in */
133 writel(crval, mmio + IMX_P0PHYCR);
134
135 /* Assert the cr_cap_data signal */
136 ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, true);
137 if (ret)
138 return ret;
139
140 /* Deassert cr_cap_data */
141 ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_CAP_DATA, false);
142 if (ret)
143 return ret;
144
145 if (val & IMX_CLOCK_RESET_RESET) {
146 /*
147 * In case we're resetting the phy, it's unable to acknowledge,
148 * so we return immediately here.
149 */
150 crval |= IMX_P0PHYCR_CR_WRITE;
151 writel(crval, mmio + IMX_P0PHYCR);
152 goto out;
153 }
154
155 /* Assert the cr_write signal */
156 ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, true);
157 if (ret)
158 return ret;
159
160 /* Deassert cr_write */
161 ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_WRITE, false);
162 if (ret)
163 return ret;
164
165out:
166 return 0;
167}
168
169static int imx_phy_reg_read(u16 *val, void __iomem *mmio)
170{
171 int ret;
172
173 /* Assert the cr_read signal */
174 ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, true);
175 if (ret)
176 return ret;
177
178 /* Capture the data from cr_data_out[] */
179 *val = readl(mmio + IMX_P0PHYSR) & IMX_P0PHYSR_CR_DATA_OUT;
180
181 /* Deassert cr_read */
182 ret = imx_phy_crbit_assert(mmio, IMX_P0PHYCR_CR_READ, false);
183 if (ret)
184 return ret;
185
186 return 0;
187}
188
189static int imx_sata_phy_reset(struct ahci_host_priv *hpriv)
190{
191 void __iomem *mmio = hpriv->mmio;
192 int timeout = 10;
193 u16 val;
194 int ret;
195
196 /* Reset SATA PHY by setting RESET bit of PHY register CLOCK_RESET */
197 ret = imx_phy_reg_addressing(IMX_CLOCK_RESET, mmio);
198 if (ret)
199 return ret;
200 ret = imx_phy_reg_write(IMX_CLOCK_RESET_RESET, mmio);
201 if (ret)
202 return ret;
203
204 /* Wait for PHY RX_PLL to be stable */
205 do {
206 usleep_range(100, 200);
207 ret = imx_phy_reg_addressing(IMX_LANE0_OUT_STAT, mmio);
208 if (ret)
209 return ret;
210 ret = imx_phy_reg_read(&val, mmio);
211 if (ret)
212 return ret;
213 if (val & IMX_LANE0_OUT_STAT_RX_PLL_STATE)
214 break;
215 } while (--timeout);
216
217 return timeout ? 0 : -ETIMEDOUT;
218}
219
Csaba Kertesz54643a82016-10-25 22:08:07 +0200220enum {
221 /* SATA PHY Register */
222 SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT = 0x0001,
223 SATA_PHY_CR_CLOCK_DAC_CTL = 0x0008,
224 SATA_PHY_CR_CLOCK_RTUNE_CTL = 0x0009,
225 SATA_PHY_CR_CLOCK_ADC_OUT = 0x000A,
226 SATA_PHY_CR_CLOCK_MPLL_TST = 0x0017,
227};
228
229static int read_adc_sum(void *dev, u16 rtune_ctl_reg, void __iomem * mmio)
230{
231 u16 adc_out_reg, read_sum;
232 u32 index, read_attempt;
Egor Starkov5bca4622017-11-13 10:31:01 +0000233 const u32 attempt_limit = 200;
Csaba Kertesz54643a82016-10-25 22:08:07 +0200234
235 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio);
236 imx_phy_reg_write(rtune_ctl_reg, mmio);
237
238 /* two dummy read */
239 index = 0;
240 read_attempt = 0;
241 adc_out_reg = 0;
242 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_ADC_OUT, mmio);
243 while (index < 2) {
244 imx_phy_reg_read(&adc_out_reg, mmio);
245 /* check if valid */
246 if (adc_out_reg & 0x400)
247 index++;
248
249 read_attempt++;
250 if (read_attempt > attempt_limit) {
251 dev_err(dev, "Read REG more than %d times!\n",
252 attempt_limit);
253 break;
254 }
255 }
256
257 index = 0;
258 read_attempt = 0;
259 read_sum = 0;
260 while (index < 80) {
261 imx_phy_reg_read(&adc_out_reg, mmio);
262 if (adc_out_reg & 0x400) {
263 read_sum = read_sum + (adc_out_reg & 0x3FF);
264 index++;
265 }
266 read_attempt++;
267 if (read_attempt > attempt_limit) {
268 dev_err(dev, "Read REG more than %d times!\n",
269 attempt_limit);
270 break;
271 }
272 }
273
274 /* Use the U32 to make 1000 precision */
275 return (read_sum * 1000) / 80;
276}
277
278/* SATA AHCI temperature monitor */
279static int sata_ahci_read_temperature(void *dev, int *temp)
280{
281 u16 mpll_test_reg, rtune_ctl_reg, dac_ctl_reg, read_sum;
282 u32 str1, str2, str3, str4;
283 int m1, m2, a;
284 struct ahci_host_priv *hpriv = dev_get_drvdata(dev);
285 void __iomem *mmio = hpriv->mmio;
286
287 /* check rd-wr to reg */
288 read_sum = 0;
289 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_CRCMP_LT_LIMIT, mmio);
290 imx_phy_reg_write(read_sum, mmio);
291 imx_phy_reg_read(&read_sum, mmio);
292 if ((read_sum & 0xffff) != 0)
293 dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum);
294
295 imx_phy_reg_write(0x5A5A, mmio);
296 imx_phy_reg_read(&read_sum, mmio);
297 if ((read_sum & 0xffff) != 0x5A5A)
298 dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum);
299
300 imx_phy_reg_write(0x1234, mmio);
301 imx_phy_reg_read(&read_sum, mmio);
302 if ((read_sum & 0xffff) != 0x1234)
303 dev_err(dev, "Read/Write REG error, 0x%x!\n", read_sum);
304
305 /* start temperature test */
306 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio);
307 imx_phy_reg_read(&mpll_test_reg, mmio);
308 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio);
309 imx_phy_reg_read(&rtune_ctl_reg, mmio);
310 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio);
311 imx_phy_reg_read(&dac_ctl_reg, mmio);
312
313 /* mpll_tst.meas_iv ([12:2]) */
314 str1 = (mpll_test_reg >> 2) & 0x7FF;
315 /* rtune_ctl.mode ([1:0]) */
316 str2 = (rtune_ctl_reg) & 0x3;
317 /* dac_ctl.dac_mode ([14:12]) */
318 str3 = (dac_ctl_reg >> 12) & 0x7;
319 /* rtune_ctl.sel_atbp ([4]) */
320 str4 = (rtune_ctl_reg >> 4);
321
322 /* Calculate the m1 */
323 /* mpll_tst.meas_iv */
324 mpll_test_reg = (mpll_test_reg & 0xE03) | (512) << 2;
325 /* rtune_ctl.mode */
326 rtune_ctl_reg = (rtune_ctl_reg & 0xFFC) | (1);
327 /* dac_ctl.dac_mode */
328 dac_ctl_reg = (dac_ctl_reg & 0x8FF) | (4) << 12;
329 /* rtune_ctl.sel_atbp */
330 rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (0) << 4;
331 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio);
332 imx_phy_reg_write(mpll_test_reg, mmio);
333 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio);
334 imx_phy_reg_write(dac_ctl_reg, mmio);
335 m1 = read_adc_sum(dev, rtune_ctl_reg, mmio);
336
337 /* Calculate the m2 */
338 /* rtune_ctl.sel_atbp */
339 rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (1) << 4;
340 m2 = read_adc_sum(dev, rtune_ctl_reg, mmio);
341
342 /* restore the status */
343 /* mpll_tst.meas_iv */
344 mpll_test_reg = (mpll_test_reg & 0xE03) | (str1) << 2;
345 /* rtune_ctl.mode */
346 rtune_ctl_reg = (rtune_ctl_reg & 0xFFC) | (str2);
347 /* dac_ctl.dac_mode */
348 dac_ctl_reg = (dac_ctl_reg & 0x8FF) | (str3) << 12;
349 /* rtune_ctl.sel_atbp */
350 rtune_ctl_reg = (rtune_ctl_reg & 0xFEF) | (str4) << 4;
351
352 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_MPLL_TST, mmio);
353 imx_phy_reg_write(mpll_test_reg, mmio);
354 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_DAC_CTL, mmio);
355 imx_phy_reg_write(dac_ctl_reg, mmio);
356 imx_phy_reg_addressing(SATA_PHY_CR_CLOCK_RTUNE_CTL, mmio);
357 imx_phy_reg_write(rtune_ctl_reg, mmio);
358
359 /* Compute temperature */
360 if (!(m2 / 1000))
361 m2 = 1000;
362 a = (m2 - m1) / (m2/1000);
363 *temp = ((-559) * a * a) / 1000 + (1379) * a + (-458000);
364
365 return 0;
366}
367
368static ssize_t sata_ahci_show_temp(struct device *dev,
369 struct device_attribute *da,
370 char *buf)
371{
372 unsigned int temp = 0;
373 int err;
374
375 err = sata_ahci_read_temperature(dev, &temp);
376 if (err < 0)
377 return err;
378
379 return sprintf(buf, "%u\n", temp);
380}
381
382static const struct thermal_zone_of_device_ops fsl_sata_ahci_of_thermal_ops = {
383 .get_temp = sata_ahci_read_temperature,
384};
385
386static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, sata_ahci_show_temp, NULL, 0);
387
388static struct attribute *fsl_sata_ahci_attrs[] = {
389 &sensor_dev_attr_temp1_input.dev_attr.attr,
390 NULL
391};
392ATTRIBUTE_GROUPS(fsl_sata_ahci);
393
Hans de Goede90870d72014-02-22 16:53:37 +0100394static int imx_sata_enable(struct ahci_host_priv *hpriv)
Marek Vasut8403e2e2013-11-25 09:47:01 +0100395{
Hans de Goede90870d72014-02-22 16:53:37 +0100396 struct imx_ahci_priv *imxpriv = hpriv->plat_data;
Shawn Guoe783c512014-05-04 21:48:06 +0800397 struct device *dev = &imxpriv->ahci_pdev->dev;
Marek Vasut8403e2e2013-11-25 09:47:01 +0100398 int ret;
399
Hans de Goede90870d72014-02-22 16:53:37 +0100400 if (imxpriv->no_device)
401 return 0;
402
Gregory CLEMENTc7d7dde2015-01-15 15:09:37 +0100403 ret = ahci_platform_enable_regulators(hpriv);
404 if (ret)
405 return ret;
Marek Vasut8403e2e2013-11-25 09:47:01 +0100406
Shawn Guoe6dd42a2014-05-28 23:05:39 +0800407 ret = clk_prepare_enable(imxpriv->sata_ref_clk);
Marek Vasut8403e2e2013-11-25 09:47:01 +0100408 if (ret < 0)
Hans de Goede90870d72014-02-22 16:53:37 +0100409 goto disable_regulator;
Richard Zhu9e54eae2013-07-24 14:15:29 +0800410
Hans de Goede90870d72014-02-22 16:53:37 +0100411 if (imxpriv->type == AHCI_IMX6Q) {
Marek Vasut4a23d172013-11-25 09:47:02 +0100412 /*
Hans de Goede90870d72014-02-22 16:53:37 +0100413 * set PHY Paremeters, two steps to configure the GPR13,
Marek Vasut4a23d172013-11-25 09:47:02 +0100414 * one write for rest of parameters, mask of first write
Hans de Goede90870d72014-02-22 16:53:37 +0100415 * is 0x07ffffff, and the other one write for setting
416 * the mpll_clk_en.
Marek Vasut4a23d172013-11-25 09:47:02 +0100417 */
418 regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
419 IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK |
420 IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK |
421 IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK |
422 IMX6Q_GPR13_SATA_SPD_MODE_MASK |
423 IMX6Q_GPR13_SATA_MPLL_SS_EN |
424 IMX6Q_GPR13_SATA_TX_ATTEN_MASK |
425 IMX6Q_GPR13_SATA_TX_BOOST_MASK |
426 IMX6Q_GPR13_SATA_TX_LVL_MASK |
427 IMX6Q_GPR13_SATA_MPLL_CLK_EN |
428 IMX6Q_GPR13_SATA_TX_EDGE_RATE,
Russell King29e69412014-06-24 11:19:37 +0100429 imxpriv->phy_params);
Hans de Goede90870d72014-02-22 16:53:37 +0100430 regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
431 IMX6Q_GPR13_SATA_MPLL_CLK_EN,
432 IMX6Q_GPR13_SATA_MPLL_CLK_EN);
Shawn Guoe783c512014-05-04 21:48:06 +0800433
Shawn Guo3685f2512014-05-17 20:46:01 +0800434 usleep_range(100, 200);
435
Shawn Guoe783c512014-05-04 21:48:06 +0800436 ret = imx_sata_phy_reset(hpriv);
437 if (ret) {
438 dev_err(dev, "failed to reset phy: %d\n", ret);
Wei Yongjun19f5be02014-07-30 08:54:07 +0800439 goto disable_clk;
Shawn Guoe783c512014-05-04 21:48:06 +0800440 }
Marek Vasut8403e2e2013-11-25 09:47:01 +0100441 }
442
Hans de Goede90870d72014-02-22 16:53:37 +0100443 usleep_range(1000, 2000);
Richard Zhu9e54eae2013-07-24 14:15:29 +0800444
445 return 0;
Hans de Goede90870d72014-02-22 16:53:37 +0100446
Wei Yongjun19f5be02014-07-30 08:54:07 +0800447disable_clk:
448 clk_disable_unprepare(imxpriv->sata_ref_clk);
Hans de Goede90870d72014-02-22 16:53:37 +0100449disable_regulator:
Gregory CLEMENTc7d7dde2015-01-15 15:09:37 +0100450 ahci_platform_disable_regulators(hpriv);
Hans de Goede90870d72014-02-22 16:53:37 +0100451
452 return ret;
Richard Zhu9e54eae2013-07-24 14:15:29 +0800453}
454
Hans de Goede90870d72014-02-22 16:53:37 +0100455static void imx_sata_disable(struct ahci_host_priv *hpriv)
Richard Zhu9e54eae2013-07-24 14:15:29 +0800456{
Hans de Goede90870d72014-02-22 16:53:37 +0100457 struct imx_ahci_priv *imxpriv = hpriv->plat_data;
Richard Zhu9e54eae2013-07-24 14:15:29 +0800458
Hans de Goede90870d72014-02-22 16:53:37 +0100459 if (imxpriv->no_device)
460 return;
461
462 if (imxpriv->type == AHCI_IMX6Q) {
463 regmap_update_bits(imxpriv->gpr, IOMUXC_GPR13,
464 IMX6Q_GPR13_SATA_MPLL_CLK_EN,
465 !IMX6Q_GPR13_SATA_MPLL_CLK_EN);
466 }
467
Shawn Guoe6dd42a2014-05-28 23:05:39 +0800468 clk_disable_unprepare(imxpriv->sata_ref_clk);
Hans de Goede90870d72014-02-22 16:53:37 +0100469
Gregory CLEMENTc7d7dde2015-01-15 15:09:37 +0100470 ahci_platform_disable_regulators(hpriv);
Hans de Goede90870d72014-02-22 16:53:37 +0100471}
472
473static void ahci_imx_error_handler(struct ata_port *ap)
474{
475 u32 reg_val;
476 struct ata_device *dev;
477 struct ata_host *host = dev_get_drvdata(ap->dev);
478 struct ahci_host_priv *hpriv = host->private_data;
479 void __iomem *mmio = hpriv->mmio;
480 struct imx_ahci_priv *imxpriv = hpriv->plat_data;
481
482 ahci_error_handler(ap);
483
484 if (!(imxpriv->first_time) || ahci_imx_hotplug)
485 return;
486
487 imxpriv->first_time = false;
488
489 ata_for_each_dev(dev, &ap->link, ENABLED)
490 return;
491 /*
492 * Disable link to save power. An imx ahci port can't be recovered
493 * without full reset once the pddq mode is enabled making it
494 * impossible to use as part of libata LPM.
495 */
Shawn Guo24a9ad52014-05-04 21:48:05 +0800496 reg_val = readl(mmio + IMX_P0PHYCR);
497 writel(reg_val | IMX_P0PHYCR_TEST_PDDQ, mmio + IMX_P0PHYCR);
Hans de Goede90870d72014-02-22 16:53:37 +0100498 imx_sata_disable(hpriv);
499 imxpriv->no_device = true;
Russell Kingf118ae52014-06-23 12:59:08 +0100500
501 dev_info(ap->dev, "no device found, disabling link.\n");
502 dev_info(ap->dev, "pass " MODULE_PARAM_PREFIX ".hotplug=1 to enable hotplug\n");
Hans de Goede90870d72014-02-22 16:53:37 +0100503}
504
505static int ahci_imx_softreset(struct ata_link *link, unsigned int *class,
506 unsigned long deadline)
507{
508 struct ata_port *ap = link->ap;
509 struct ata_host *host = dev_get_drvdata(ap->dev);
510 struct ahci_host_priv *hpriv = host->private_data;
511 struct imx_ahci_priv *imxpriv = hpriv->plat_data;
512 int ret = -EIO;
513
514 if (imxpriv->type == AHCI_IMX53)
515 ret = ahci_pmp_retry_srst_ops.softreset(link, class, deadline);
516 else if (imxpriv->type == AHCI_IMX6Q)
517 ret = ahci_ops.softreset(link, class, deadline);
518
519 return ret;
520}
521
522static struct ata_port_operations ahci_imx_ops = {
523 .inherits = &ahci_ops,
524 .host_stop = ahci_imx_host_stop,
525 .error_handler = ahci_imx_error_handler,
526 .softreset = ahci_imx_softreset,
527};
528
529static const struct ata_port_info ahci_imx_port_info = {
530 .flags = AHCI_FLAG_COMMON,
531 .pio_mask = ATA_PIO4,
532 .udma_mask = ATA_UDMA6,
533 .port_ops = &ahci_imx_ops,
534};
535
536static const struct of_device_id imx_ahci_of_match[] = {
537 { .compatible = "fsl,imx53-ahci", .data = (void *)AHCI_IMX53 },
538 { .compatible = "fsl,imx6q-ahci", .data = (void *)AHCI_IMX6Q },
539 {},
540};
541MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
542
Russell King29e69412014-06-24 11:19:37 +0100543struct reg_value {
544 u32 of_value;
545 u32 reg_value;
546};
547
548struct reg_property {
549 const char *name;
550 const struct reg_value *values;
551 size_t num_values;
552 u32 def_value;
Russell Kinga6e72622014-06-24 11:19:47 +0100553 u32 set_value;
Russell King29e69412014-06-24 11:19:37 +0100554};
555
556static const struct reg_value gpr13_tx_level[] = {
557 { 937, IMX6Q_GPR13_SATA_TX_LVL_0_937_V },
558 { 947, IMX6Q_GPR13_SATA_TX_LVL_0_947_V },
559 { 957, IMX6Q_GPR13_SATA_TX_LVL_0_957_V },
560 { 966, IMX6Q_GPR13_SATA_TX_LVL_0_966_V },
561 { 976, IMX6Q_GPR13_SATA_TX_LVL_0_976_V },
562 { 986, IMX6Q_GPR13_SATA_TX_LVL_0_986_V },
563 { 996, IMX6Q_GPR13_SATA_TX_LVL_0_996_V },
564 { 1005, IMX6Q_GPR13_SATA_TX_LVL_1_005_V },
565 { 1015, IMX6Q_GPR13_SATA_TX_LVL_1_015_V },
566 { 1025, IMX6Q_GPR13_SATA_TX_LVL_1_025_V },
567 { 1035, IMX6Q_GPR13_SATA_TX_LVL_1_035_V },
568 { 1045, IMX6Q_GPR13_SATA_TX_LVL_1_045_V },
569 { 1054, IMX6Q_GPR13_SATA_TX_LVL_1_054_V },
570 { 1064, IMX6Q_GPR13_SATA_TX_LVL_1_064_V },
571 { 1074, IMX6Q_GPR13_SATA_TX_LVL_1_074_V },
572 { 1084, IMX6Q_GPR13_SATA_TX_LVL_1_084_V },
573 { 1094, IMX6Q_GPR13_SATA_TX_LVL_1_094_V },
574 { 1104, IMX6Q_GPR13_SATA_TX_LVL_1_104_V },
575 { 1113, IMX6Q_GPR13_SATA_TX_LVL_1_113_V },
576 { 1123, IMX6Q_GPR13_SATA_TX_LVL_1_123_V },
577 { 1133, IMX6Q_GPR13_SATA_TX_LVL_1_133_V },
578 { 1143, IMX6Q_GPR13_SATA_TX_LVL_1_143_V },
579 { 1152, IMX6Q_GPR13_SATA_TX_LVL_1_152_V },
580 { 1162, IMX6Q_GPR13_SATA_TX_LVL_1_162_V },
581 { 1172, IMX6Q_GPR13_SATA_TX_LVL_1_172_V },
582 { 1182, IMX6Q_GPR13_SATA_TX_LVL_1_182_V },
583 { 1191, IMX6Q_GPR13_SATA_TX_LVL_1_191_V },
584 { 1201, IMX6Q_GPR13_SATA_TX_LVL_1_201_V },
585 { 1211, IMX6Q_GPR13_SATA_TX_LVL_1_211_V },
586 { 1221, IMX6Q_GPR13_SATA_TX_LVL_1_221_V },
587 { 1230, IMX6Q_GPR13_SATA_TX_LVL_1_230_V },
588 { 1240, IMX6Q_GPR13_SATA_TX_LVL_1_240_V }
589};
590
591static const struct reg_value gpr13_tx_boost[] = {
592 { 0, IMX6Q_GPR13_SATA_TX_BOOST_0_00_DB },
593 { 370, IMX6Q_GPR13_SATA_TX_BOOST_0_37_DB },
594 { 740, IMX6Q_GPR13_SATA_TX_BOOST_0_74_DB },
595 { 1110, IMX6Q_GPR13_SATA_TX_BOOST_1_11_DB },
596 { 1480, IMX6Q_GPR13_SATA_TX_BOOST_1_48_DB },
597 { 1850, IMX6Q_GPR13_SATA_TX_BOOST_1_85_DB },
598 { 2220, IMX6Q_GPR13_SATA_TX_BOOST_2_22_DB },
599 { 2590, IMX6Q_GPR13_SATA_TX_BOOST_2_59_DB },
600 { 2960, IMX6Q_GPR13_SATA_TX_BOOST_2_96_DB },
601 { 3330, IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB },
602 { 3700, IMX6Q_GPR13_SATA_TX_BOOST_3_70_DB },
603 { 4070, IMX6Q_GPR13_SATA_TX_BOOST_4_07_DB },
604 { 4440, IMX6Q_GPR13_SATA_TX_BOOST_4_44_DB },
605 { 4810, IMX6Q_GPR13_SATA_TX_BOOST_4_81_DB },
606 { 5280, IMX6Q_GPR13_SATA_TX_BOOST_5_28_DB },
607 { 5750, IMX6Q_GPR13_SATA_TX_BOOST_5_75_DB }
608};
609
610static const struct reg_value gpr13_tx_atten[] = {
611 { 8, IMX6Q_GPR13_SATA_TX_ATTEN_8_16 },
612 { 9, IMX6Q_GPR13_SATA_TX_ATTEN_9_16 },
613 { 10, IMX6Q_GPR13_SATA_TX_ATTEN_10_16 },
614 { 12, IMX6Q_GPR13_SATA_TX_ATTEN_12_16 },
615 { 14, IMX6Q_GPR13_SATA_TX_ATTEN_14_16 },
616 { 16, IMX6Q_GPR13_SATA_TX_ATTEN_16_16 },
617};
618
619static const struct reg_value gpr13_rx_eq[] = {
620 { 500, IMX6Q_GPR13_SATA_RX_EQ_VAL_0_5_DB },
621 { 1000, IMX6Q_GPR13_SATA_RX_EQ_VAL_1_0_DB },
622 { 1500, IMX6Q_GPR13_SATA_RX_EQ_VAL_1_5_DB },
623 { 2000, IMX6Q_GPR13_SATA_RX_EQ_VAL_2_0_DB },
624 { 2500, IMX6Q_GPR13_SATA_RX_EQ_VAL_2_5_DB },
625 { 3000, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB },
626 { 3500, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_5_DB },
627 { 4000, IMX6Q_GPR13_SATA_RX_EQ_VAL_4_0_DB },
628};
629
630static const struct reg_property gpr13_props[] = {
631 {
632 .name = "fsl,transmit-level-mV",
633 .values = gpr13_tx_level,
634 .num_values = ARRAY_SIZE(gpr13_tx_level),
635 .def_value = IMX6Q_GPR13_SATA_TX_LVL_1_025_V,
636 }, {
637 .name = "fsl,transmit-boost-mdB",
638 .values = gpr13_tx_boost,
639 .num_values = ARRAY_SIZE(gpr13_tx_boost),
640 .def_value = IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB,
641 }, {
642 .name = "fsl,transmit-atten-16ths",
643 .values = gpr13_tx_atten,
644 .num_values = ARRAY_SIZE(gpr13_tx_atten),
645 .def_value = IMX6Q_GPR13_SATA_TX_ATTEN_9_16,
646 }, {
647 .name = "fsl,receive-eq-mdB",
648 .values = gpr13_rx_eq,
649 .num_values = ARRAY_SIZE(gpr13_rx_eq),
650 .def_value = IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB,
Russell Kinga6e72622014-06-24 11:19:47 +0100651 }, {
652 .name = "fsl,no-spread-spectrum",
653 .def_value = IMX6Q_GPR13_SATA_MPLL_SS_EN,
654 .set_value = 0,
Russell King29e69412014-06-24 11:19:37 +0100655 },
656};
657
658static u32 imx_ahci_parse_props(struct device *dev,
659 const struct reg_property *prop, size_t num)
660{
661 struct device_node *np = dev->of_node;
662 u32 reg_value = 0;
663 int i, j;
664
665 for (i = 0; i < num; i++, prop++) {
666 u32 of_val;
667
Russell Kinga6e72622014-06-24 11:19:47 +0100668 if (prop->num_values == 0) {
669 if (of_property_read_bool(np, prop->name))
670 reg_value |= prop->set_value;
671 else
672 reg_value |= prop->def_value;
673 continue;
674 }
675
Russell King29e69412014-06-24 11:19:37 +0100676 if (of_property_read_u32(np, prop->name, &of_val)) {
677 dev_info(dev, "%s not specified, using %08x\n",
678 prop->name, prop->def_value);
679 reg_value |= prop->def_value;
680 continue;
681 }
682
683 for (j = 0; j < prop->num_values; j++) {
684 if (prop->values[j].of_value == of_val) {
685 dev_info(dev, "%s value %u, using %08x\n",
686 prop->name, of_val, prop->values[j].reg_value);
687 reg_value |= prop->values[j].reg_value;
688 break;
689 }
690 }
691
692 if (j == prop->num_values) {
693 dev_err(dev, "DT property %s is not a valid value\n",
694 prop->name);
695 reg_value |= prop->def_value;
696 }
697 }
698
699 return reg_value;
700}
701
Akinobu Mita018d5ef2015-01-29 08:30:29 +0900702static struct scsi_host_template ahci_platform_sht = {
703 AHCI_SHT(DRV_NAME),
704};
705
Hans de Goede90870d72014-02-22 16:53:37 +0100706static int imx_ahci_probe(struct platform_device *pdev)
707{
708 struct device *dev = &pdev->dev;
709 const struct of_device_id *of_id;
710 struct ahci_host_priv *hpriv;
711 struct imx_ahci_priv *imxpriv;
712 unsigned int reg_val;
713 int ret;
714
715 of_id = of_match_device(imx_ahci_of_match, dev);
716 if (!of_id)
717 return -EINVAL;
718
719 imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
720 if (!imxpriv)
721 return -ENOMEM;
722
Shawn Guoe783c512014-05-04 21:48:06 +0800723 imxpriv->ahci_pdev = pdev;
Hans de Goede90870d72014-02-22 16:53:37 +0100724 imxpriv->no_device = false;
725 imxpriv->first_time = true;
726 imxpriv->type = (enum ahci_imx_type)of_id->data;
Shawn Guoe6dd42a2014-05-28 23:05:39 +0800727
728 imxpriv->sata_clk = devm_clk_get(dev, "sata");
729 if (IS_ERR(imxpriv->sata_clk)) {
730 dev_err(dev, "can't get sata clock.\n");
731 return PTR_ERR(imxpriv->sata_clk);
732 }
733
734 imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
735 if (IS_ERR(imxpriv->sata_ref_clk)) {
736 dev_err(dev, "can't get sata_ref clock.\n");
737 return PTR_ERR(imxpriv->sata_ref_clk);
738 }
739
Hans de Goede90870d72014-02-22 16:53:37 +0100740 imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
741 if (IS_ERR(imxpriv->ahb_clk)) {
742 dev_err(dev, "can't get ahb clock.\n");
743 return PTR_ERR(imxpriv->ahb_clk);
744 }
745
746 if (imxpriv->type == AHCI_IMX6Q) {
Russell King29e69412014-06-24 11:19:37 +0100747 u32 reg_value;
748
Hans de Goede90870d72014-02-22 16:53:37 +0100749 imxpriv->gpr = syscon_regmap_lookup_by_compatible(
750 "fsl,imx6q-iomuxc-gpr");
751 if (IS_ERR(imxpriv->gpr)) {
752 dev_err(dev,
753 "failed to find fsl,imx6q-iomux-gpr regmap\n");
754 return PTR_ERR(imxpriv->gpr);
755 }
Russell King29e69412014-06-24 11:19:37 +0100756
757 reg_value = imx_ahci_parse_props(dev, gpr13_props,
758 ARRAY_SIZE(gpr13_props));
759
760 imxpriv->phy_params =
761 IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M |
762 IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F |
763 IMX6Q_GPR13_SATA_SPD_MODE_3P0G |
Russell King29e69412014-06-24 11:19:37 +0100764 reg_value;
Hans de Goede90870d72014-02-22 16:53:37 +0100765 }
766
767 hpriv = ahci_platform_get_resources(pdev);
768 if (IS_ERR(hpriv))
769 return PTR_ERR(hpriv);
770
771 hpriv->plat_data = imxpriv;
772
Shawn Guoe6dd42a2014-05-28 23:05:39 +0800773 ret = clk_prepare_enable(imxpriv->sata_clk);
Hans de Goede90870d72014-02-22 16:53:37 +0100774 if (ret)
775 return ret;
776
Arnd Bergmannd7969f52017-01-11 14:36:16 +0100777 if (imxpriv->type == AHCI_IMX53 &&
778 IS_ENABLED(CONFIG_HWMON)) {
Csaba Kertesz54643a82016-10-25 22:08:07 +0200779 /* Add the temperature monitor */
780 struct device *hwmon_dev;
781
782 hwmon_dev =
783 devm_hwmon_device_register_with_groups(dev,
784 "sata_ahci",
785 hpriv,
786 fsl_sata_ahci_groups);
787 if (IS_ERR(hwmon_dev)) {
788 ret = PTR_ERR(hwmon_dev);
789 goto disable_clk;
790 }
791 devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev,
792 &fsl_sata_ahci_of_thermal_ops);
793 dev_info(dev, "%s: sensor 'sata_ahci'\n", dev_name(hwmon_dev));
794 }
795
Shawn Guoe6dd42a2014-05-28 23:05:39 +0800796 ret = imx_sata_enable(hpriv);
797 if (ret)
798 goto disable_clk;
799
Hans de Goede90870d72014-02-22 16:53:37 +0100800 /*
801 * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
Shawn Guo24a9ad52014-05-04 21:48:05 +0800802 * and IP vendor specific register IMX_TIMER1MS.
Hans de Goede90870d72014-02-22 16:53:37 +0100803 * Configure CAP_SSS (support stagered spin up).
804 * Implement the port0.
805 * Get the ahb clock rate, and configure the TIMER1MS register.
806 */
807 reg_val = readl(hpriv->mmio + HOST_CAP);
808 if (!(reg_val & HOST_CAP_SSS)) {
809 reg_val |= HOST_CAP_SSS;
810 writel(reg_val, hpriv->mmio + HOST_CAP);
811 }
812 reg_val = readl(hpriv->mmio + HOST_PORTS_IMPL);
813 if (!(reg_val & 0x1)) {
814 reg_val |= 0x1;
815 writel(reg_val, hpriv->mmio + HOST_PORTS_IMPL);
816 }
817
818 reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
Shawn Guo24a9ad52014-05-04 21:48:05 +0800819 writel(reg_val, hpriv->mmio + IMX_TIMER1MS);
Hans de Goede90870d72014-02-22 16:53:37 +0100820
Akinobu Mita018d5ef2015-01-29 08:30:29 +0900821 ret = ahci_platform_init_host(pdev, hpriv, &ahci_imx_port_info,
822 &ahci_platform_sht);
Hans de Goede90870d72014-02-22 16:53:37 +0100823 if (ret)
Shawn Guoe6dd42a2014-05-28 23:05:39 +0800824 goto disable_sata;
Hans de Goede90870d72014-02-22 16:53:37 +0100825
Shawn Guoe6dd42a2014-05-28 23:05:39 +0800826 return 0;
827
828disable_sata:
829 imx_sata_disable(hpriv);
830disable_clk:
831 clk_disable_unprepare(imxpriv->sata_clk);
Hans de Goede90870d72014-02-22 16:53:37 +0100832 return ret;
833}
834
835static void ahci_imx_host_stop(struct ata_host *host)
836{
837 struct ahci_host_priv *hpriv = host->private_data;
Shawn Guoe6dd42a2014-05-28 23:05:39 +0800838 struct imx_ahci_priv *imxpriv = hpriv->plat_data;
Hans de Goede90870d72014-02-22 16:53:37 +0100839
840 imx_sata_disable(hpriv);
Shawn Guoe6dd42a2014-05-28 23:05:39 +0800841 clk_disable_unprepare(imxpriv->sata_clk);
Hans de Goede90870d72014-02-22 16:53:37 +0100842}
843
Hans de Goede46ce6b72014-03-05 20:17:49 +0100844#ifdef CONFIG_PM_SLEEP
Hans de Goede90870d72014-02-22 16:53:37 +0100845static int imx_ahci_suspend(struct device *dev)
846{
847 struct ata_host *host = dev_get_drvdata(dev);
848 struct ahci_host_priv *hpriv = host->private_data;
849 int ret;
850
851 ret = ahci_platform_suspend_host(dev);
852 if (ret)
853 return ret;
854
855 imx_sata_disable(hpriv);
856
Richard Zhu9e54eae2013-07-24 14:15:29 +0800857 return 0;
858}
859
Hans de Goede90870d72014-02-22 16:53:37 +0100860static int imx_ahci_resume(struct device *dev)
861{
862 struct ata_host *host = dev_get_drvdata(dev);
863 struct ahci_host_priv *hpriv = host->private_data;
864 int ret;
865
866 ret = imx_sata_enable(hpriv);
867 if (ret)
868 return ret;
869
870 return ahci_platform_resume_host(dev);
871}
Hans de Goede46ce6b72014-03-05 20:17:49 +0100872#endif
Hans de Goede90870d72014-02-22 16:53:37 +0100873
874static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume);
875
Richard Zhu9e54eae2013-07-24 14:15:29 +0800876static struct platform_driver imx_ahci_driver = {
877 .probe = imx_ahci_probe,
Hans de Goede90870d72014-02-22 16:53:37 +0100878 .remove = ata_platform_remove_one,
Richard Zhu9e54eae2013-07-24 14:15:29 +0800879 .driver = {
Akinobu Mita018d5ef2015-01-29 08:30:29 +0900880 .name = DRV_NAME,
Richard Zhu9e54eae2013-07-24 14:15:29 +0800881 .of_match_table = imx_ahci_of_match,
Hans de Goede90870d72014-02-22 16:53:37 +0100882 .pm = &ahci_imx_pm_ops,
Richard Zhu9e54eae2013-07-24 14:15:29 +0800883 },
884};
885module_platform_driver(imx_ahci_driver);
886
887MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver");
888MODULE_AUTHOR("Richard Zhu <Hong-Xing.Zhu@freescale.com>");
889MODULE_LICENSE("GPL");
890MODULE_ALIAS("ahci:imx");