Peter Ujfalusi | aa76564 | 2012-11-27 11:09:58 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Driver for TWL4030/6030 Pulse Width Modulator used as LED driver |
| 3 | * |
| 4 | * Copyright (C) 2012 Texas Instruments |
| 5 | * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> |
| 6 | * |
| 7 | * This driver is a complete rewrite of the former pwm-twl6030.c authorded by: |
| 8 | * Hemanth V <hemanthv@ti.com> |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify it |
| 11 | * under the terms of the GNU General Public License version 2 as published by |
| 12 | * the Free Software Foundation. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, but WITHOUT |
| 15 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 16 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 17 | * more details. |
| 18 | * |
| 19 | * You should have received a copy of the GNU General Public License along with |
| 20 | * this program. If not, see <http://www.gnu.org/licenses/>. |
| 21 | */ |
| 22 | |
| 23 | #include <linux/module.h> |
Sachin Kamat | e852340 | 2013-09-27 16:53:25 +0530 | [diff] [blame] | 24 | #include <linux/of.h> |
Peter Ujfalusi | aa76564 | 2012-11-27 11:09:58 +0100 | [diff] [blame] | 25 | #include <linux/platform_device.h> |
| 26 | #include <linux/pwm.h> |
Wolfram Sang | a205425 | 2017-08-14 18:34:24 +0200 | [diff] [blame] | 27 | #include <linux/mfd/twl.h> |
Peter Ujfalusi | aa76564 | 2012-11-27 11:09:58 +0100 | [diff] [blame] | 28 | #include <linux/slab.h> |
| 29 | |
| 30 | /* |
| 31 | * This driver handles the PWM driven LED terminals of TWL4030 and TWL6030. |
| 32 | * To generate the signal on TWL4030: |
| 33 | * - LEDA uses PWMA |
| 34 | * - LEDB uses PWMB |
| 35 | * TWL6030 has one LED pin with dedicated LEDPWM |
| 36 | */ |
| 37 | |
| 38 | #define TWL4030_LED_MAX 0x7f |
| 39 | #define TWL6030_LED_MAX 0xff |
| 40 | |
| 41 | /* Registers, bits and macro for TWL4030 */ |
| 42 | #define TWL4030_LEDEN_REG 0x00 |
| 43 | #define TWL4030_PWMA_REG 0x01 |
| 44 | |
| 45 | #define TWL4030_LEDXON (1 << 0) |
| 46 | #define TWL4030_LEDXPWM (1 << 4) |
| 47 | #define TWL4030_LED_PINS (TWL4030_LEDXON | TWL4030_LEDXPWM) |
| 48 | #define TWL4030_LED_TOGGLE(led, x) ((x) << (led)) |
| 49 | |
| 50 | /* Register, bits and macro for TWL6030 */ |
| 51 | #define TWL6030_LED_PWM_CTRL1 0xf4 |
| 52 | #define TWL6030_LED_PWM_CTRL2 0xf5 |
| 53 | |
| 54 | #define TWL6040_LED_MODE_HW 0x00 |
| 55 | #define TWL6040_LED_MODE_ON 0x01 |
| 56 | #define TWL6040_LED_MODE_OFF 0x02 |
| 57 | #define TWL6040_LED_MODE_MASK 0x03 |
| 58 | |
| 59 | struct twl_pwmled_chip { |
| 60 | struct pwm_chip chip; |
| 61 | struct mutex mutex; |
| 62 | }; |
| 63 | |
| 64 | static inline struct twl_pwmled_chip *to_twl(struct pwm_chip *chip) |
| 65 | { |
| 66 | return container_of(chip, struct twl_pwmled_chip, chip); |
| 67 | } |
| 68 | |
| 69 | static int twl4030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| 70 | int duty_ns, int period_ns) |
| 71 | { |
| 72 | int duty_cycle = DIV_ROUND_UP(duty_ns * TWL4030_LED_MAX, period_ns) + 1; |
| 73 | u8 pwm_config[2] = { 1, 0 }; |
| 74 | int base, ret; |
| 75 | |
| 76 | /* |
| 77 | * To configure the duty period: |
| 78 | * On-cycle is set to 1 (the minimum allowed value) |
| 79 | * The off time of 0 is not configurable, so the mapping is: |
| 80 | * 0 -> off cycle = 2, |
| 81 | * 1 -> off cycle = 2, |
| 82 | * 2 -> off cycle = 3, |
| 83 | * 126 - > off cycle 127, |
| 84 | * 127 - > off cycle 1 |
| 85 | * When on cycle == off cycle the PWM will be always on |
| 86 | */ |
| 87 | if (duty_cycle == 1) |
| 88 | duty_cycle = 2; |
| 89 | else if (duty_cycle > TWL4030_LED_MAX) |
| 90 | duty_cycle = 1; |
| 91 | |
| 92 | base = pwm->hwpwm * 2 + TWL4030_PWMA_REG; |
| 93 | |
| 94 | pwm_config[1] = duty_cycle; |
| 95 | |
| 96 | ret = twl_i2c_write(TWL4030_MODULE_LED, pwm_config, base, 2); |
| 97 | if (ret < 0) |
| 98 | dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label); |
| 99 | |
| 100 | return ret; |
| 101 | } |
| 102 | |
| 103 | static int twl4030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 104 | { |
| 105 | struct twl_pwmled_chip *twl = to_twl(chip); |
| 106 | int ret; |
| 107 | u8 val; |
| 108 | |
| 109 | mutex_lock(&twl->mutex); |
| 110 | ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG); |
| 111 | if (ret < 0) { |
| 112 | dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label); |
| 113 | goto out; |
| 114 | } |
| 115 | |
| 116 | val |= TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS); |
| 117 | |
| 118 | ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG); |
| 119 | if (ret < 0) |
| 120 | dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label); |
| 121 | |
| 122 | out: |
| 123 | mutex_unlock(&twl->mutex); |
| 124 | return ret; |
| 125 | } |
| 126 | |
| 127 | static void twl4030_pwmled_disable(struct pwm_chip *chip, |
| 128 | struct pwm_device *pwm) |
| 129 | { |
| 130 | struct twl_pwmled_chip *twl = to_twl(chip); |
| 131 | int ret; |
| 132 | u8 val; |
| 133 | |
| 134 | mutex_lock(&twl->mutex); |
| 135 | ret = twl_i2c_read_u8(TWL4030_MODULE_LED, &val, TWL4030_LEDEN_REG); |
| 136 | if (ret < 0) { |
| 137 | dev_err(chip->dev, "%s: Failed to read LEDEN\n", pwm->label); |
| 138 | goto out; |
| 139 | } |
| 140 | |
| 141 | val &= ~TWL4030_LED_TOGGLE(pwm->hwpwm, TWL4030_LED_PINS); |
| 142 | |
| 143 | ret = twl_i2c_write_u8(TWL4030_MODULE_LED, val, TWL4030_LEDEN_REG); |
| 144 | if (ret < 0) |
| 145 | dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); |
| 146 | |
| 147 | out: |
| 148 | mutex_unlock(&twl->mutex); |
| 149 | } |
| 150 | |
| 151 | static int twl6030_pwmled_config(struct pwm_chip *chip, struct pwm_device *pwm, |
| 152 | int duty_ns, int period_ns) |
| 153 | { |
| 154 | int duty_cycle = (duty_ns * TWL6030_LED_MAX) / period_ns; |
| 155 | u8 on_time; |
| 156 | int ret; |
| 157 | |
| 158 | on_time = duty_cycle & 0xff; |
| 159 | |
| 160 | ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, on_time, |
| 161 | TWL6030_LED_PWM_CTRL1); |
| 162 | if (ret < 0) |
| 163 | dev_err(chip->dev, "%s: Failed to configure PWM\n", pwm->label); |
| 164 | |
| 165 | return ret; |
| 166 | } |
| 167 | |
| 168 | static int twl6030_pwmled_enable(struct pwm_chip *chip, struct pwm_device *pwm) |
| 169 | { |
| 170 | struct twl_pwmled_chip *twl = to_twl(chip); |
| 171 | int ret; |
| 172 | u8 val; |
| 173 | |
| 174 | mutex_lock(&twl->mutex); |
| 175 | ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2); |
| 176 | if (ret < 0) { |
| 177 | dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n", |
| 178 | pwm->label); |
| 179 | goto out; |
| 180 | } |
| 181 | |
| 182 | val &= ~TWL6040_LED_MODE_MASK; |
| 183 | val |= TWL6040_LED_MODE_ON; |
| 184 | |
| 185 | ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2); |
| 186 | if (ret < 0) |
| 187 | dev_err(chip->dev, "%s: Failed to enable PWM\n", pwm->label); |
| 188 | |
| 189 | out: |
| 190 | mutex_unlock(&twl->mutex); |
| 191 | return ret; |
| 192 | } |
| 193 | |
| 194 | static void twl6030_pwmled_disable(struct pwm_chip *chip, |
| 195 | struct pwm_device *pwm) |
| 196 | { |
| 197 | struct twl_pwmled_chip *twl = to_twl(chip); |
| 198 | int ret; |
| 199 | u8 val; |
| 200 | |
| 201 | mutex_lock(&twl->mutex); |
| 202 | ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2); |
| 203 | if (ret < 0) { |
| 204 | dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n", |
| 205 | pwm->label); |
| 206 | goto out; |
| 207 | } |
| 208 | |
| 209 | val &= ~TWL6040_LED_MODE_MASK; |
| 210 | val |= TWL6040_LED_MODE_OFF; |
| 211 | |
| 212 | ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2); |
| 213 | if (ret < 0) |
| 214 | dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label); |
| 215 | |
| 216 | out: |
| 217 | mutex_unlock(&twl->mutex); |
| 218 | } |
| 219 | |
| 220 | static int twl6030_pwmled_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| 221 | { |
| 222 | struct twl_pwmled_chip *twl = to_twl(chip); |
| 223 | int ret; |
| 224 | u8 val; |
| 225 | |
| 226 | mutex_lock(&twl->mutex); |
| 227 | ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2); |
| 228 | if (ret < 0) { |
| 229 | dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n", |
| 230 | pwm->label); |
| 231 | goto out; |
| 232 | } |
| 233 | |
| 234 | val &= ~TWL6040_LED_MODE_MASK; |
| 235 | val |= TWL6040_LED_MODE_OFF; |
| 236 | |
| 237 | ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2); |
| 238 | if (ret < 0) |
| 239 | dev_err(chip->dev, "%s: Failed to request PWM\n", pwm->label); |
| 240 | |
| 241 | out: |
| 242 | mutex_unlock(&twl->mutex); |
| 243 | return ret; |
| 244 | } |
| 245 | |
| 246 | static void twl6030_pwmled_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| 247 | { |
| 248 | struct twl_pwmled_chip *twl = to_twl(chip); |
| 249 | int ret; |
| 250 | u8 val; |
| 251 | |
| 252 | mutex_lock(&twl->mutex); |
| 253 | ret = twl_i2c_read_u8(TWL6030_MODULE_ID1, &val, TWL6030_LED_PWM_CTRL2); |
| 254 | if (ret < 0) { |
| 255 | dev_err(chip->dev, "%s: Failed to read PWM_CTRL2\n", |
| 256 | pwm->label); |
| 257 | goto out; |
| 258 | } |
| 259 | |
| 260 | val &= ~TWL6040_LED_MODE_MASK; |
| 261 | val |= TWL6040_LED_MODE_HW; |
| 262 | |
| 263 | ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_LED_PWM_CTRL2); |
| 264 | if (ret < 0) |
| 265 | dev_err(chip->dev, "%s: Failed to free PWM\n", pwm->label); |
| 266 | |
| 267 | out: |
| 268 | mutex_unlock(&twl->mutex); |
| 269 | } |
| 270 | |
| 271 | static const struct pwm_ops twl4030_pwmled_ops = { |
| 272 | .enable = twl4030_pwmled_enable, |
| 273 | .disable = twl4030_pwmled_disable, |
| 274 | .config = twl4030_pwmled_config, |
Axel Lin | 7fa2531 | 2013-03-31 11:16:14 +0800 | [diff] [blame] | 275 | .owner = THIS_MODULE, |
Peter Ujfalusi | aa76564 | 2012-11-27 11:09:58 +0100 | [diff] [blame] | 276 | }; |
| 277 | |
| 278 | static const struct pwm_ops twl6030_pwmled_ops = { |
| 279 | .enable = twl6030_pwmled_enable, |
| 280 | .disable = twl6030_pwmled_disable, |
| 281 | .config = twl6030_pwmled_config, |
| 282 | .request = twl6030_pwmled_request, |
| 283 | .free = twl6030_pwmled_free, |
Axel Lin | 7fa2531 | 2013-03-31 11:16:14 +0800 | [diff] [blame] | 284 | .owner = THIS_MODULE, |
Peter Ujfalusi | aa76564 | 2012-11-27 11:09:58 +0100 | [diff] [blame] | 285 | }; |
| 286 | |
| 287 | static int twl_pwmled_probe(struct platform_device *pdev) |
| 288 | { |
| 289 | struct twl_pwmled_chip *twl; |
| 290 | int ret; |
| 291 | |
| 292 | twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL); |
| 293 | if (!twl) |
| 294 | return -ENOMEM; |
| 295 | |
| 296 | if (twl_class_is_4030()) { |
| 297 | twl->chip.ops = &twl4030_pwmled_ops; |
| 298 | twl->chip.npwm = 2; |
| 299 | } else { |
| 300 | twl->chip.ops = &twl6030_pwmled_ops; |
| 301 | twl->chip.npwm = 1; |
| 302 | } |
| 303 | |
| 304 | twl->chip.dev = &pdev->dev; |
| 305 | twl->chip.base = -1; |
Peter Ujfalusi | aa76564 | 2012-11-27 11:09:58 +0100 | [diff] [blame] | 306 | |
| 307 | mutex_init(&twl->mutex); |
| 308 | |
| 309 | ret = pwmchip_add(&twl->chip); |
| 310 | if (ret < 0) |
| 311 | return ret; |
| 312 | |
| 313 | platform_set_drvdata(pdev, twl); |
| 314 | |
| 315 | return 0; |
| 316 | } |
| 317 | |
| 318 | static int twl_pwmled_remove(struct platform_device *pdev) |
| 319 | { |
| 320 | struct twl_pwmled_chip *twl = platform_get_drvdata(pdev); |
| 321 | |
| 322 | return pwmchip_remove(&twl->chip); |
| 323 | } |
| 324 | |
| 325 | #ifdef CONFIG_OF |
Thierry Reding | f1a8870 | 2013-04-18 10:04:14 +0200 | [diff] [blame] | 326 | static const struct of_device_id twl_pwmled_of_match[] = { |
Peter Ujfalusi | aa76564 | 2012-11-27 11:09:58 +0100 | [diff] [blame] | 327 | { .compatible = "ti,twl4030-pwmled" }, |
| 328 | { .compatible = "ti,twl6030-pwmled" }, |
| 329 | { }, |
| 330 | }; |
| 331 | MODULE_DEVICE_TABLE(of, twl_pwmled_of_match); |
| 332 | #endif |
| 333 | |
| 334 | static struct platform_driver twl_pwmled_driver = { |
| 335 | .driver = { |
| 336 | .name = "twl-pwmled", |
| 337 | .of_match_table = of_match_ptr(twl_pwmled_of_match), |
| 338 | }, |
| 339 | .probe = twl_pwmled_probe, |
| 340 | .remove = twl_pwmled_remove, |
| 341 | }; |
| 342 | module_platform_driver(twl_pwmled_driver); |
| 343 | |
| 344 | MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>"); |
| 345 | MODULE_DESCRIPTION("PWM driver for TWL4030 and TWL6030 LED outputs"); |
| 346 | MODULE_ALIAS("platform:twl-pwmled"); |
| 347 | MODULE_LICENSE("GPL"); |