Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2015 Hans de Goede <hdegoede@redhat.com> |
| 3 | * |
| 4 | * This file is dual-licensed: you can use it either under the terms |
| 5 | * of the GPL or the X11 license, at your option. Note that this dual |
| 6 | * licensing only applies to this file, and not this project as a |
| 7 | * whole. |
| 8 | * |
| 9 | * a) This file is free software; you can redistribute it and/or |
| 10 | * modify it under the terms of the GNU General Public License as |
| 11 | * published by the Free Software Foundation; either version 2 of the |
| 12 | * License, or (at your option) any later version. |
| 13 | * |
| 14 | * This file is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | * GNU General Public License for more details. |
| 18 | * |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 19 | * Or, alternatively, |
| 20 | * |
| 21 | * b) Permission is hereby granted, free of charge, to any person |
| 22 | * obtaining a copy of this software and associated documentation |
| 23 | * files (the "Software"), to deal in the Software without |
| 24 | * restriction, including without limitation the rights to use, |
| 25 | * copy, modify, merge, publish, distribute, sublicense, and/or |
| 26 | * sell copies of the Software, and to permit persons to whom the |
| 27 | * Software is furnished to do so, subject to the following |
| 28 | * conditions: |
| 29 | * |
| 30 | * The above copyright notice and this permission notice shall be |
| 31 | * included in all copies or substantial portions of the Software. |
| 32 | * |
| 33 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| 34 | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| 35 | * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| 36 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| 37 | * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| 38 | * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| 39 | * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| 40 | * OTHER DEALINGS IN THE SOFTWARE. |
| 41 | */ |
| 42 | |
| 43 | /dts-v1/; |
| 44 | #include "sun7i-a20.dtsi" |
| 45 | #include "sunxi-common-regulators.dtsi" |
| 46 | #include <dt-bindings/gpio/gpio.h> |
| 47 | #include <dt-bindings/interrupt-controller/arm-gic.h> |
| 48 | |
| 49 | / { |
| 50 | model = "LeMaker Banana Pro"; |
| 51 | compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; |
| 52 | |
Maxime Ripard | 59ebbe8 | 2015-03-15 20:47:31 +0100 | [diff] [blame] | 53 | aliases { |
| 54 | serial0 = &uart0; |
Michael Ring | 4528f53 | 2015-05-22 16:33:04 +0200 | [diff] [blame] | 55 | serial1 = &uart4; |
Maxime Ripard | 59ebbe8 | 2015-03-15 20:47:31 +0100 | [diff] [blame] | 56 | serial2 = &uart7; |
| 57 | }; |
| 58 | |
| 59 | chosen { |
| 60 | stdout-path = "serial0:115200n8"; |
| 61 | }; |
| 62 | |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 63 | leds { |
| 64 | compatible = "gpio-leds"; |
| 65 | pinctrl-names = "default"; |
| 66 | pinctrl-0 = <&led_pins_bananapro>; |
| 67 | |
| 68 | blue { |
| 69 | label = "bananapro:blue:usr"; |
| 70 | gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; |
| 71 | }; |
| 72 | |
| 73 | green { |
| 74 | label = "bananapro:green:usr"; |
| 75 | gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; |
| 76 | }; |
| 77 | }; |
| 78 | |
Jörg Krause | f2cb904 | 2017-01-09 21:36:38 +0100 | [diff] [blame] | 79 | wifi_pwrseq: wifi-pwrseq { |
| 80 | compatible = "mmc-pwrseq-simple"; |
| 81 | pinctrl-names = "default"; |
| 82 | pinctrl-0 = <&vmmc3_pin_bananapro>; |
| 83 | reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; |
| 84 | }; |
| 85 | |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 86 | reg_gmac_3v3: gmac-3v3 { |
| 87 | compatible = "regulator-fixed"; |
| 88 | pinctrl-names = "default"; |
| 89 | pinctrl-0 = <&gmac_power_pin_bananapro>; |
| 90 | regulator-name = "gmac-3v3"; |
| 91 | regulator-min-microvolt = <3300000>; |
| 92 | regulator-max-microvolt = <3300000>; |
| 93 | startup-delay-us = <100000>; |
| 94 | enable-active-high; |
| 95 | gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; |
| 96 | }; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 97 | }; |
| 98 | |
| 99 | &ahci { |
| 100 | status = "okay"; |
| 101 | }; |
| 102 | |
Jörg Krause | 1647fe3 | 2017-01-04 15:22:50 +0100 | [diff] [blame] | 103 | &codec { |
| 104 | status = "okay"; |
| 105 | }; |
| 106 | |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 107 | &ehci0 { |
| 108 | status = "okay"; |
| 109 | }; |
| 110 | |
| 111 | &ehci1 { |
| 112 | status = "okay"; |
| 113 | }; |
| 114 | |
| 115 | &gmac { |
| 116 | pinctrl-names = "default"; |
| 117 | pinctrl-0 = <&gmac_pins_rgmii_a>; |
| 118 | phy = <&phy1>; |
| 119 | phy-mode = "rgmii"; |
| 120 | phy-supply = <®_gmac_3v3>; |
| 121 | status = "okay"; |
| 122 | |
| 123 | phy1: ethernet-phy@1 { |
| 124 | reg = <1>; |
| 125 | }; |
| 126 | }; |
| 127 | |
| 128 | &i2c0 { |
| 129 | pinctrl-names = "default"; |
| 130 | pinctrl-0 = <&i2c0_pins_a>; |
| 131 | status = "okay"; |
| 132 | |
| 133 | axp209: pmic@34 { |
| 134 | compatible = "x-powers,axp209"; |
| 135 | reg = <0x34>; |
| 136 | interrupt-parent = <&nmi_intc>; |
| 137 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 138 | |
| 139 | interrupt-controller; |
| 140 | #interrupt-cells = <1>; |
| 141 | }; |
| 142 | }; |
| 143 | |
| 144 | &i2c2 { |
| 145 | pinctrl-names = "default"; |
| 146 | pinctrl-0 = <&i2c2_pins_a>; |
| 147 | status = "okay"; |
| 148 | }; |
| 149 | |
| 150 | &ir0 { |
| 151 | pinctrl-names = "default"; |
Marcus Cooper | 469a22e | 2015-05-02 13:36:20 +0200 | [diff] [blame] | 152 | pinctrl-0 = <&ir0_rx_pins_a>; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 153 | status = "okay"; |
| 154 | }; |
| 155 | |
| 156 | &mmc0 { |
| 157 | pinctrl-names = "default"; |
| 158 | pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>; |
| 159 | vmmc-supply = <®_vcc3v3>; |
| 160 | bus-width = <4>; |
| 161 | cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ |
| 162 | cd-inverted; |
| 163 | status = "okay"; |
| 164 | }; |
| 165 | |
| 166 | &mmc3 { |
| 167 | pinctrl-names = "default"; |
| 168 | pinctrl-0 = <&mmc3_pins_a>; |
Jörg Krause | f2cb904 | 2017-01-09 21:36:38 +0100 | [diff] [blame] | 169 | vmmc-supply = <®_vcc3v3>; |
| 170 | mmc-pwrseq = <&wifi_pwrseq>; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 171 | bus-width = <4>; |
| 172 | non-removable; |
| 173 | status = "okay"; |
Jörg Krause | f2cb904 | 2017-01-09 21:36:38 +0100 | [diff] [blame] | 174 | |
Fabio Estevam | e5b558a | 2017-05-21 18:16:55 -0300 | [diff] [blame] | 175 | brcmf: wifi@1 { |
Jörg Krause | f2cb904 | 2017-01-09 21:36:38 +0100 | [diff] [blame] | 176 | reg = <1>; |
| 177 | compatible = "brcm,bcm4329-fmac"; |
| 178 | interrupt-parent = <&pio>; |
| 179 | interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; |
| 180 | interrupt-names = "host-wake"; |
| 181 | }; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 182 | }; |
| 183 | |
| 184 | &ohci0 { |
| 185 | status = "okay"; |
| 186 | }; |
| 187 | |
| 188 | &ohci1 { |
| 189 | status = "okay"; |
| 190 | }; |
| 191 | |
| 192 | &pio { |
| 193 | gmac_power_pin_bananapro: gmac_power_pin@0 { |
Maxime Ripard | 1edcd36 | 2016-09-23 14:28:10 +0300 | [diff] [blame] | 194 | pins = "PH23"; |
| 195 | function = "gpio_out"; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 196 | }; |
| 197 | |
| 198 | led_pins_bananapro: led_pins@0 { |
Maxime Ripard | 1edcd36 | 2016-09-23 14:28:10 +0300 | [diff] [blame] | 199 | pins = "PH24", "PG2"; |
| 200 | function = "gpio_out"; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 201 | }; |
| 202 | |
| 203 | mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { |
Maxime Ripard | 1edcd36 | 2016-09-23 14:28:10 +0300 | [diff] [blame] | 204 | pins = "PH10"; |
| 205 | function = "gpio_in"; |
| 206 | bias-pull-up; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 207 | }; |
| 208 | |
| 209 | usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { |
Maxime Ripard | 1edcd36 | 2016-09-23 14:28:10 +0300 | [diff] [blame] | 210 | pins = "PH0"; |
| 211 | function = "gpio_out"; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 212 | }; |
| 213 | |
| 214 | usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { |
Maxime Ripard | 1edcd36 | 2016-09-23 14:28:10 +0300 | [diff] [blame] | 215 | pins = "PH1"; |
| 216 | function = "gpio_out"; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 217 | }; |
| 218 | |
| 219 | vmmc3_pin_bananapro: vmmc3_pin@0 { |
Maxime Ripard | 1edcd36 | 2016-09-23 14:28:10 +0300 | [diff] [blame] | 220 | pins = "PH22"; |
| 221 | function = "gpio_out"; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 222 | }; |
| 223 | }; |
| 224 | |
| 225 | ®_usb1_vbus { |
| 226 | pinctrl-0 = <&usb1_vbus_pin_bananapro>; |
| 227 | gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ |
| 228 | status = "okay"; |
| 229 | }; |
| 230 | |
| 231 | ®_usb2_vbus { |
| 232 | pinctrl-0 = <&usb2_vbus_pin_bananapro>; |
| 233 | gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ |
| 234 | status = "okay"; |
| 235 | }; |
| 236 | |
| 237 | &spi0 { |
| 238 | pinctrl-names = "default"; |
Maxime Ripard | f3022c6 | 2015-05-03 09:25:41 +0200 | [diff] [blame] | 239 | pinctrl-0 = <&spi0_pins_a>, |
| 240 | <&spi0_cs0_pins_a>, |
| 241 | <&spi0_cs1_pins_a>; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 242 | status = "okay"; |
| 243 | }; |
| 244 | |
| 245 | &uart0 { |
| 246 | pinctrl-names = "default"; |
| 247 | pinctrl-0 = <&uart0_pins_a>; |
| 248 | status = "okay"; |
| 249 | }; |
| 250 | |
Michael Ring | 4528f53 | 2015-05-22 16:33:04 +0200 | [diff] [blame] | 251 | &uart4 { |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 252 | pinctrl-names = "default"; |
Michael Ring | 4528f53 | 2015-05-22 16:33:04 +0200 | [diff] [blame] | 253 | pinctrl-0 = <&uart4_pins_b>; |
Hans de Goede | 10662a3 | 2015-01-18 13:08:19 +0100 | [diff] [blame] | 254 | status = "okay"; |
| 255 | }; |
| 256 | |
| 257 | &uart7 { |
| 258 | pinctrl-names = "default"; |
| 259 | pinctrl-0 = <&uart7_pins_a>; |
| 260 | status = "okay"; |
| 261 | }; |
| 262 | |
| 263 | &usbphy { |
| 264 | usb1_vbus-supply = <®_usb1_vbus>; |
| 265 | usb2_vbus-supply = <®_usb2_vbus>; |
| 266 | status = "okay"; |
| 267 | }; |