blob: 7596c144a9fb54d45e313588cddc9ec7e1836c79 [file] [log] [blame]
Rob Clark16ea9752013-01-08 15:04:28 -06001/*
2 * Copyright (C) 2012 Texas Instruments
3 * Author: Rob Clark <robdclark@gmail.com>
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License version 2 as published by
7 * the Free Software Foundation.
8 *
9 * This program is distributed in the hope that it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program. If not, see <http://www.gnu.org/licenses/>.
16 */
17
18#ifndef __TILCDC_DRV_H__
19#define __TILCDC_DRV_H__
20
21#include <linux/clk.h>
22#include <linux/cpufreq.h>
23#include <linux/module.h>
24#include <linux/platform_device.h>
25#include <linux/pm.h>
26#include <linux/pm_runtime.h>
27#include <linux/slab.h>
28#include <linux/of.h>
29#include <linux/of_device.h>
30#include <linux/list.h>
31
32#include <drm/drmP.h>
33#include <drm/drm_crtc_helper.h>
34#include <drm/drm_gem_cma_helper.h>
35#include <drm/drm_fb_cma_helper.h>
36
Darren Etheridge4e564342013-06-21 13:52:23 -050037/* Defaulting to pixel clock defined on AM335x */
38#define TILCDC_DEFAULT_MAX_PIXELCLOCK 126000
39/* Defaulting to max width as defined on AM335x */
40#define TILCDC_DEFAULT_MAX_WIDTH 2048
41/*
42 * This may need some tweaking, but want to allow at least 1280x1024@60
43 * with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to
44 * be supportable
45 */
46#define TILCDC_DEFAULT_MAX_BANDWIDTH (1280*1024*60)
47
48
Rob Clark16ea9752013-01-08 15:04:28 -060049struct tilcdc_drm_private {
50 void __iomem *mmio;
51
52 struct clk *disp_clk; /* display dpll */
53 struct clk *clk; /* functional clock */
54 int rev; /* IP revision */
55
56 /* don't attempt resolutions w/ higher W * H * Hz: */
57 uint32_t max_bandwidth;
Darren Etheridge4e564342013-06-21 13:52:23 -050058 /*
59 * Pixel Clock will be restricted to some value as
60 * defined in the device datasheet measured in KHz
61 */
62 uint32_t max_pixelclock;
63 /*
64 * Max allowable width is limited on a per device basis
65 * measured in pixels
66 */
67 uint32_t max_width;
Rob Clark16ea9752013-01-08 15:04:28 -060068
69 /* register contents saved across suspend/resume: */
70 u32 saved_register[12];
71
72#ifdef CONFIG_CPU_FREQ
73 struct notifier_block freq_transition;
74 unsigned int lcd_fck_rate;
75#endif
76
77 struct workqueue_struct *wq;
78
79 struct drm_fbdev_cma *fbdev;
80
81 struct drm_crtc *crtc;
82
83 unsigned int num_encoders;
84 struct drm_encoder *encoders[8];
85
86 unsigned int num_connectors;
87 struct drm_connector *connectors[8];
88};
89
90/* Sub-module for display. Since we don't know at compile time what panels
91 * or display adapter(s) might be present (for ex, off chip dvi/tfp410,
92 * hdmi encoder, various lcd panels), the connector/encoder(s) are split into
93 * separate drivers. If they are probed and found to be present, they
94 * register themselves with tilcdc_register_module().
95 */
96struct tilcdc_module;
97
98struct tilcdc_module_ops {
99 /* create appropriate encoders/connectors: */
100 int (*modeset_init)(struct tilcdc_module *mod, struct drm_device *dev);
Rob Clark16ea9752013-01-08 15:04:28 -0600101#ifdef CONFIG_DEBUG_FS
102 /* create debugfs nodes (can be NULL): */
103 int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor);
104 /* cleanup debugfs nodes (can be NULL): */
105 void (*debugfs_cleanup)(struct tilcdc_module *mod, struct drm_minor *minor);
106#endif
107};
108
109struct tilcdc_module {
110 const char *name;
111 struct list_head list;
112 const struct tilcdc_module_ops *funcs;
Benoit Parrotdc28aa02013-06-18 17:18:31 -0500113 unsigned int preferred_bpp;
Rob Clark16ea9752013-01-08 15:04:28 -0600114};
115
116void tilcdc_module_init(struct tilcdc_module *mod, const char *name,
117 const struct tilcdc_module_ops *funcs);
118void tilcdc_module_cleanup(struct tilcdc_module *mod);
Darren Etheridge39de6192013-06-21 13:52:27 -0500119void tilcdc_slave_probedefer(bool defered);
Rob Clark16ea9752013-01-08 15:04:28 -0600120
121/* Panel config that needs to be set in the crtc, but is not coming from
122 * the mode timings. The display module is expected to call
123 * tilcdc_crtc_set_panel_info() to set this during modeset.
124 */
125struct tilcdc_panel_info {
126
127 /* AC Bias Pin Frequency */
128 uint32_t ac_bias;
129
130 /* AC Bias Pin Transitions per Interrupt */
131 uint32_t ac_bias_intrpt;
132
133 /* DMA burst size */
134 uint32_t dma_burst_sz;
135
136 /* Bits per pixel */
137 uint32_t bpp;
138
139 /* FIFO DMA Request Delay */
140 uint32_t fdd;
141
142 /* TFT Alternative Signal Mapping (Only for active) */
143 bool tft_alt_mode;
144
145 /* Invert pixel clock */
146 bool invert_pxl_clk;
147
148 /* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
149 uint32_t sync_edge;
150
151 /* Horizontal and Vertical Sync: Control: 0=ignore */
152 uint32_t sync_ctrl;
153
154 /* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
155 uint32_t raster_order;
156
157 /* DMA FIFO threshold */
158 uint32_t fifo_th;
159};
160
161#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
162
163struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev);
164void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file);
165irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc);
166void tilcdc_crtc_update_clk(struct drm_crtc *crtc);
167void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
168 const struct tilcdc_panel_info *info);
169int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode);
170int tilcdc_crtc_max_width(struct drm_crtc *crtc);
171
172#endif /* __TILCDC_DRV_H__ */