Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2012 Red Hat |
| 3 | * |
| 4 | * based in parts on udlfb.c: |
| 5 | * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> |
| 6 | * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> |
| 7 | * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> |
| 8 | |
| 9 | * This file is subject to the terms and conditions of the GNU General Public |
| 10 | * License v2. See the file COPYING in the main directory of this archive for |
| 11 | * more details. |
| 12 | */ |
| 13 | |
| 14 | #include "drmP.h" |
| 15 | #include "drm_crtc.h" |
| 16 | #include "drm_crtc_helper.h" |
| 17 | #include "udl_drv.h" |
| 18 | |
| 19 | /* |
| 20 | * All DisplayLink bulk operations start with 0xAF, followed by specific code |
| 21 | * All operations are written to buffers which then later get sent to device |
| 22 | */ |
| 23 | static char *udl_set_register(char *buf, u8 reg, u8 val) |
| 24 | { |
| 25 | *buf++ = 0xAF; |
| 26 | *buf++ = 0x20; |
| 27 | *buf++ = reg; |
| 28 | *buf++ = val; |
| 29 | return buf; |
| 30 | } |
| 31 | |
| 32 | static char *udl_vidreg_lock(char *buf) |
| 33 | { |
| 34 | return udl_set_register(buf, 0xFF, 0x00); |
| 35 | } |
| 36 | |
| 37 | static char *udl_vidreg_unlock(char *buf) |
| 38 | { |
| 39 | return udl_set_register(buf, 0xFF, 0xFF); |
| 40 | } |
| 41 | |
| 42 | /* |
| 43 | * On/Off for driving the DisplayLink framebuffer to the display |
| 44 | * 0x00 H and V sync on |
| 45 | * 0x01 H and V sync off (screen blank but powered) |
| 46 | * 0x07 DPMS powerdown (requires modeset to come back) |
| 47 | */ |
Dave Airlie | 5bd42f6 | 2012-06-26 14:53:07 +0100 | [diff] [blame] | 48 | static char *udl_set_blank(char *buf, int dpms_mode) |
Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 49 | { |
Dave Airlie | 5bd42f6 | 2012-06-26 14:53:07 +0100 | [diff] [blame] | 50 | u8 reg; |
| 51 | switch (dpms_mode) { |
| 52 | case DRM_MODE_DPMS_OFF: |
| 53 | reg = 0x07; |
| 54 | break; |
| 55 | case DRM_MODE_DPMS_STANDBY: |
| 56 | reg = 0x05; |
| 57 | break; |
| 58 | case DRM_MODE_DPMS_SUSPEND: |
| 59 | reg = 0x01; |
| 60 | break; |
| 61 | case DRM_MODE_DPMS_ON: |
| 62 | reg = 0x00; |
| 63 | break; |
| 64 | } |
| 65 | |
| 66 | return udl_set_register(buf, 0x1f, reg); |
Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 67 | } |
| 68 | |
| 69 | static char *udl_set_color_depth(char *buf, u8 selection) |
| 70 | { |
| 71 | return udl_set_register(buf, 0x00, selection); |
| 72 | } |
| 73 | |
| 74 | static char *udl_set_base16bpp(char *wrptr, u32 base) |
| 75 | { |
| 76 | /* the base pointer is 16 bits wide, 0x20 is hi byte. */ |
| 77 | wrptr = udl_set_register(wrptr, 0x20, base >> 16); |
| 78 | wrptr = udl_set_register(wrptr, 0x21, base >> 8); |
| 79 | return udl_set_register(wrptr, 0x22, base); |
| 80 | } |
| 81 | |
| 82 | /* |
| 83 | * DisplayLink HW has separate 16bpp and 8bpp framebuffers. |
| 84 | * In 24bpp modes, the low 323 RGB bits go in the 8bpp framebuffer |
| 85 | */ |
| 86 | static char *udl_set_base8bpp(char *wrptr, u32 base) |
| 87 | { |
| 88 | wrptr = udl_set_register(wrptr, 0x26, base >> 16); |
| 89 | wrptr = udl_set_register(wrptr, 0x27, base >> 8); |
| 90 | return udl_set_register(wrptr, 0x28, base); |
| 91 | } |
| 92 | |
| 93 | static char *udl_set_register_16(char *wrptr, u8 reg, u16 value) |
| 94 | { |
| 95 | wrptr = udl_set_register(wrptr, reg, value >> 8); |
| 96 | return udl_set_register(wrptr, reg+1, value); |
| 97 | } |
| 98 | |
| 99 | /* |
| 100 | * This is kind of weird because the controller takes some |
| 101 | * register values in a different byte order than other registers. |
| 102 | */ |
| 103 | static char *udl_set_register_16be(char *wrptr, u8 reg, u16 value) |
| 104 | { |
| 105 | wrptr = udl_set_register(wrptr, reg, value); |
| 106 | return udl_set_register(wrptr, reg+1, value >> 8); |
| 107 | } |
| 108 | |
| 109 | /* |
| 110 | * LFSR is linear feedback shift register. The reason we have this is |
| 111 | * because the display controller needs to minimize the clock depth of |
| 112 | * various counters used in the display path. So this code reverses the |
| 113 | * provided value into the lfsr16 value by counting backwards to get |
| 114 | * the value that needs to be set in the hardware comparator to get the |
| 115 | * same actual count. This makes sense once you read above a couple of |
| 116 | * times and think about it from a hardware perspective. |
| 117 | */ |
| 118 | static u16 udl_lfsr16(u16 actual_count) |
| 119 | { |
| 120 | u32 lv = 0xFFFF; /* This is the lfsr value that the hw starts with */ |
| 121 | |
| 122 | while (actual_count--) { |
| 123 | lv = ((lv << 1) | |
| 124 | (((lv >> 15) ^ (lv >> 4) ^ (lv >> 2) ^ (lv >> 1)) & 1)) |
| 125 | & 0xFFFF; |
| 126 | } |
| 127 | |
| 128 | return (u16) lv; |
| 129 | } |
| 130 | |
| 131 | /* |
| 132 | * This does LFSR conversion on the value that is to be written. |
| 133 | * See LFSR explanation above for more detail. |
| 134 | */ |
| 135 | static char *udl_set_register_lfsr16(char *wrptr, u8 reg, u16 value) |
| 136 | { |
| 137 | return udl_set_register_16(wrptr, reg, udl_lfsr16(value)); |
| 138 | } |
| 139 | |
| 140 | /* |
| 141 | * This takes a standard fbdev screeninfo struct and all of its monitor mode |
| 142 | * details and converts them into the DisplayLink equivalent register commands. |
| 143 | ERR(vreg(dev, 0x00, (color_depth == 16) ? 0 : 1)); |
| 144 | ERR(vreg_lfsr16(dev, 0x01, xDisplayStart)); |
| 145 | ERR(vreg_lfsr16(dev, 0x03, xDisplayEnd)); |
| 146 | ERR(vreg_lfsr16(dev, 0x05, yDisplayStart)); |
| 147 | ERR(vreg_lfsr16(dev, 0x07, yDisplayEnd)); |
| 148 | ERR(vreg_lfsr16(dev, 0x09, xEndCount)); |
| 149 | ERR(vreg_lfsr16(dev, 0x0B, hSyncStart)); |
| 150 | ERR(vreg_lfsr16(dev, 0x0D, hSyncEnd)); |
| 151 | ERR(vreg_big_endian(dev, 0x0F, hPixels)); |
| 152 | ERR(vreg_lfsr16(dev, 0x11, yEndCount)); |
| 153 | ERR(vreg_lfsr16(dev, 0x13, vSyncStart)); |
| 154 | ERR(vreg_lfsr16(dev, 0x15, vSyncEnd)); |
| 155 | ERR(vreg_big_endian(dev, 0x17, vPixels)); |
| 156 | ERR(vreg_little_endian(dev, 0x1B, pixelClock5KHz)); |
| 157 | |
| 158 | ERR(vreg(dev, 0x1F, 0)); |
| 159 | |
| 160 | ERR(vbuf(dev, WRITE_VIDREG_UNLOCK, DSIZEOF(WRITE_VIDREG_UNLOCK))); |
| 161 | */ |
| 162 | static char *udl_set_vid_cmds(char *wrptr, struct drm_display_mode *mode) |
| 163 | { |
| 164 | u16 xds, yds; |
| 165 | u16 xde, yde; |
| 166 | u16 yec; |
| 167 | |
| 168 | /* x display start */ |
| 169 | xds = mode->crtc_htotal - mode->crtc_hsync_start; |
| 170 | wrptr = udl_set_register_lfsr16(wrptr, 0x01, xds); |
| 171 | /* x display end */ |
| 172 | xde = xds + mode->crtc_hdisplay; |
| 173 | wrptr = udl_set_register_lfsr16(wrptr, 0x03, xde); |
| 174 | |
| 175 | /* y display start */ |
| 176 | yds = mode->crtc_vtotal - mode->crtc_vsync_start; |
| 177 | wrptr = udl_set_register_lfsr16(wrptr, 0x05, yds); |
| 178 | /* y display end */ |
| 179 | yde = yds + mode->crtc_vdisplay; |
| 180 | wrptr = udl_set_register_lfsr16(wrptr, 0x07, yde); |
| 181 | |
| 182 | /* x end count is active + blanking - 1 */ |
| 183 | wrptr = udl_set_register_lfsr16(wrptr, 0x09, |
| 184 | mode->crtc_htotal - 1); |
| 185 | |
| 186 | /* libdlo hardcodes hsync start to 1 */ |
| 187 | wrptr = udl_set_register_lfsr16(wrptr, 0x0B, 1); |
| 188 | |
| 189 | /* hsync end is width of sync pulse + 1 */ |
| 190 | wrptr = udl_set_register_lfsr16(wrptr, 0x0D, |
| 191 | mode->crtc_hsync_end - mode->crtc_hsync_start + 1); |
| 192 | |
| 193 | /* hpixels is active pixels */ |
| 194 | wrptr = udl_set_register_16(wrptr, 0x0F, mode->hdisplay); |
| 195 | |
| 196 | /* yendcount is vertical active + vertical blanking */ |
| 197 | yec = mode->crtc_vtotal; |
| 198 | wrptr = udl_set_register_lfsr16(wrptr, 0x11, yec); |
| 199 | |
| 200 | /* libdlo hardcodes vsync start to 0 */ |
| 201 | wrptr = udl_set_register_lfsr16(wrptr, 0x13, 0); |
| 202 | |
| 203 | /* vsync end is width of vsync pulse */ |
| 204 | wrptr = udl_set_register_lfsr16(wrptr, 0x15, mode->crtc_vsync_end - mode->crtc_vsync_start); |
| 205 | |
| 206 | /* vpixels is active pixels */ |
| 207 | wrptr = udl_set_register_16(wrptr, 0x17, mode->crtc_vdisplay); |
| 208 | |
| 209 | wrptr = udl_set_register_16be(wrptr, 0x1B, |
| 210 | mode->clock / 5); |
| 211 | |
| 212 | return wrptr; |
| 213 | } |
| 214 | |
Dave Airlie | 5bd42f6 | 2012-06-26 14:53:07 +0100 | [diff] [blame] | 215 | static char *udl_dummy_render(char *wrptr) |
| 216 | { |
| 217 | *wrptr++ = 0xAF; |
| 218 | *wrptr++ = 0x6A; /* copy */ |
| 219 | *wrptr++ = 0x00; /* from addr */ |
| 220 | *wrptr++ = 0x00; |
| 221 | *wrptr++ = 0x00; |
| 222 | *wrptr++ = 0x01; /* one pixel */ |
| 223 | *wrptr++ = 0x00; /* to address */ |
| 224 | *wrptr++ = 0x00; |
| 225 | *wrptr++ = 0x00; |
| 226 | return wrptr; |
| 227 | } |
| 228 | |
Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 229 | static int udl_crtc_write_mode_to_hw(struct drm_crtc *crtc) |
| 230 | { |
| 231 | struct drm_device *dev = crtc->dev; |
| 232 | struct udl_device *udl = dev->dev_private; |
| 233 | struct urb *urb; |
| 234 | char *buf; |
| 235 | int retval; |
| 236 | |
| 237 | urb = udl_get_urb(dev); |
| 238 | if (!urb) |
| 239 | return -ENOMEM; |
| 240 | |
| 241 | buf = (char *)urb->transfer_buffer; |
| 242 | |
| 243 | memcpy(buf, udl->mode_buf, udl->mode_buf_len); |
| 244 | retval = udl_submit_urb(dev, urb, udl->mode_buf_len); |
| 245 | DRM_INFO("write mode info %d\n", udl->mode_buf_len); |
| 246 | return retval; |
| 247 | } |
| 248 | |
| 249 | |
| 250 | static void udl_crtc_dpms(struct drm_crtc *crtc, int mode) |
| 251 | { |
| 252 | struct drm_device *dev = crtc->dev; |
| 253 | struct udl_device *udl = dev->dev_private; |
| 254 | int retval; |
| 255 | |
| 256 | if (mode == DRM_MODE_DPMS_OFF) { |
| 257 | char *buf; |
| 258 | struct urb *urb; |
| 259 | urb = udl_get_urb(dev); |
| 260 | if (!urb) |
| 261 | return; |
| 262 | |
| 263 | buf = (char *)urb->transfer_buffer; |
| 264 | buf = udl_vidreg_lock(buf); |
Dave Airlie | 5bd42f6 | 2012-06-26 14:53:07 +0100 | [diff] [blame] | 265 | buf = udl_set_blank(buf, mode); |
Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 266 | buf = udl_vidreg_unlock(buf); |
| 267 | |
Dave Airlie | 5bd42f6 | 2012-06-26 14:53:07 +0100 | [diff] [blame] | 268 | buf = udl_dummy_render(buf); |
Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 269 | retval = udl_submit_urb(dev, urb, buf - (char *) |
| 270 | urb->transfer_buffer); |
| 271 | } else { |
| 272 | if (udl->mode_buf_len == 0) { |
| 273 | DRM_ERROR("Trying to enable DPMS with no mode\n"); |
| 274 | return; |
| 275 | } |
| 276 | udl_crtc_write_mode_to_hw(crtc); |
| 277 | } |
| 278 | |
| 279 | } |
| 280 | |
| 281 | static bool udl_crtc_mode_fixup(struct drm_crtc *crtc, |
Laurent Pinchart | e811f5a | 2012-07-17 17:56:50 +0200 | [diff] [blame] | 282 | const struct drm_display_mode *mode, |
Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 283 | struct drm_display_mode *adjusted_mode) |
| 284 | |
| 285 | { |
| 286 | return true; |
| 287 | } |
| 288 | |
| 289 | #if 0 |
| 290 | static int |
| 291 | udl_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, |
| 292 | int x, int y, enum mode_set_atomic state) |
| 293 | { |
| 294 | return 0; |
| 295 | } |
| 296 | |
| 297 | static int |
| 298 | udl_pipe_set_base(struct drm_crtc *crtc, int x, int y, |
| 299 | struct drm_framebuffer *old_fb) |
| 300 | { |
| 301 | return 0; |
| 302 | } |
| 303 | #endif |
| 304 | |
| 305 | static int udl_crtc_mode_set(struct drm_crtc *crtc, |
| 306 | struct drm_display_mode *mode, |
| 307 | struct drm_display_mode *adjusted_mode, |
| 308 | int x, int y, |
| 309 | struct drm_framebuffer *old_fb) |
| 310 | |
| 311 | { |
| 312 | struct drm_device *dev = crtc->dev; |
| 313 | struct udl_framebuffer *ufb = to_udl_fb(crtc->fb); |
| 314 | struct udl_device *udl = dev->dev_private; |
| 315 | char *buf; |
| 316 | char *wrptr; |
| 317 | int color_depth = 0; |
| 318 | |
| 319 | buf = (char *)udl->mode_buf; |
| 320 | |
| 321 | /* for now we just clip 24 -> 16 - if we fix that fix this */ |
| 322 | /*if (crtc->fb->bits_per_pixel != 16) |
| 323 | color_depth = 1; */ |
| 324 | |
| 325 | /* This first section has to do with setting the base address on the |
| 326 | * controller * associated with the display. There are 2 base |
| 327 | * pointers, currently, we only * use the 16 bpp segment. |
| 328 | */ |
| 329 | wrptr = udl_vidreg_lock(buf); |
| 330 | wrptr = udl_set_color_depth(wrptr, color_depth); |
| 331 | /* set base for 16bpp segment to 0 */ |
| 332 | wrptr = udl_set_base16bpp(wrptr, 0); |
| 333 | /* set base for 8bpp segment to end of fb */ |
| 334 | wrptr = udl_set_base8bpp(wrptr, 2 * mode->vdisplay * mode->hdisplay); |
| 335 | |
| 336 | wrptr = udl_set_vid_cmds(wrptr, adjusted_mode); |
Dave Airlie | 5bd42f6 | 2012-06-26 14:53:07 +0100 | [diff] [blame] | 337 | wrptr = udl_set_blank(wrptr, DRM_MODE_DPMS_ON); |
Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 338 | wrptr = udl_vidreg_unlock(wrptr); |
| 339 | |
Dave Airlie | 5bd42f6 | 2012-06-26 14:53:07 +0100 | [diff] [blame] | 340 | wrptr = udl_dummy_render(wrptr); |
| 341 | |
Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 342 | ufb->active_16 = true; |
| 343 | if (old_fb) { |
| 344 | struct udl_framebuffer *uold_fb = to_udl_fb(old_fb); |
| 345 | uold_fb->active_16 = false; |
| 346 | } |
| 347 | udl->mode_buf_len = wrptr - buf; |
| 348 | |
| 349 | /* damage all of it */ |
| 350 | udl_handle_damage(ufb, 0, 0, ufb->base.width, ufb->base.height); |
| 351 | return 0; |
| 352 | } |
| 353 | |
| 354 | |
| 355 | static void udl_crtc_disable(struct drm_crtc *crtc) |
| 356 | { |
Dave Airlie | d5c2c20 | 2012-08-17 02:55:48 +0000 | [diff] [blame^] | 357 | udl_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); |
Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 358 | } |
| 359 | |
| 360 | static void udl_crtc_destroy(struct drm_crtc *crtc) |
| 361 | { |
| 362 | drm_crtc_cleanup(crtc); |
| 363 | kfree(crtc); |
| 364 | } |
| 365 | |
| 366 | static void udl_load_lut(struct drm_crtc *crtc) |
| 367 | { |
| 368 | } |
| 369 | |
| 370 | static void udl_crtc_prepare(struct drm_crtc *crtc) |
| 371 | { |
| 372 | } |
| 373 | |
| 374 | static void udl_crtc_commit(struct drm_crtc *crtc) |
| 375 | { |
| 376 | udl_crtc_dpms(crtc, DRM_MODE_DPMS_ON); |
| 377 | } |
| 378 | |
| 379 | static struct drm_crtc_helper_funcs udl_helper_funcs = { |
| 380 | .dpms = udl_crtc_dpms, |
| 381 | .mode_fixup = udl_crtc_mode_fixup, |
| 382 | .mode_set = udl_crtc_mode_set, |
| 383 | .prepare = udl_crtc_prepare, |
| 384 | .commit = udl_crtc_commit, |
| 385 | .disable = udl_crtc_disable, |
| 386 | .load_lut = udl_load_lut, |
| 387 | }; |
| 388 | |
| 389 | static const struct drm_crtc_funcs udl_crtc_funcs = { |
| 390 | .set_config = drm_crtc_helper_set_config, |
| 391 | .destroy = udl_crtc_destroy, |
| 392 | }; |
| 393 | |
| 394 | int udl_crtc_init(struct drm_device *dev) |
| 395 | { |
| 396 | struct drm_crtc *crtc; |
| 397 | |
| 398 | crtc = kzalloc(sizeof(struct drm_crtc) + sizeof(struct drm_connector *), GFP_KERNEL); |
| 399 | if (crtc == NULL) |
| 400 | return -ENOMEM; |
| 401 | |
| 402 | drm_crtc_init(dev, crtc, &udl_crtc_funcs); |
| 403 | drm_crtc_helper_add(crtc, &udl_helper_funcs); |
| 404 | |
| 405 | return 0; |
| 406 | } |
| 407 | |
| 408 | static const struct drm_mode_config_funcs udl_mode_funcs = { |
| 409 | .fb_create = udl_fb_user_fb_create, |
| 410 | .output_poll_changed = NULL, |
| 411 | }; |
| 412 | |
| 413 | int udl_modeset_init(struct drm_device *dev) |
| 414 | { |
| 415 | struct drm_encoder *encoder; |
| 416 | drm_mode_config_init(dev); |
| 417 | |
| 418 | dev->mode_config.min_width = 640; |
| 419 | dev->mode_config.min_height = 480; |
| 420 | |
| 421 | dev->mode_config.max_width = 2048; |
| 422 | dev->mode_config.max_height = 2048; |
| 423 | |
| 424 | dev->mode_config.prefer_shadow = 0; |
| 425 | dev->mode_config.preferred_depth = 24; |
| 426 | |
Laurent Pinchart | e6ecefa | 2012-05-17 13:27:23 +0200 | [diff] [blame] | 427 | dev->mode_config.funcs = &udl_mode_funcs; |
Dave Airlie | 5320918 | 2010-12-15 07:14:24 +1000 | [diff] [blame] | 428 | |
| 429 | drm_mode_create_dirty_info_property(dev); |
| 430 | |
| 431 | udl_crtc_init(dev); |
| 432 | |
| 433 | encoder = udl_encoder_init(dev); |
| 434 | |
| 435 | udl_connector_init(dev, encoder); |
| 436 | |
| 437 | return 0; |
| 438 | } |
| 439 | |
| 440 | void udl_modeset_cleanup(struct drm_device *dev) |
| 441 | { |
| 442 | drm_mode_config_cleanup(dev); |
| 443 | } |