Robert Baldyga | c04c674 | 2015-08-20 17:26:02 +0200 | [diff] [blame] | 1 | /* |
| 2 | * I2C Link Layer for Samsung S3FWRN5 NCI based Driver |
| 3 | * |
| 4 | * Copyright (C) 2015 Samsung Electrnoics |
| 5 | * Robert Baldyga <r.baldyga@samsung.com> |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify it |
| 8 | * under the terms and conditions of the GNU General Public License, |
| 9 | * version 2 or later, as published by the Free Software Foundation. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| 18 | */ |
| 19 | |
| 20 | #include <linux/i2c.h> |
| 21 | #include <linux/gpio.h> |
| 22 | #include <linux/delay.h> |
| 23 | #include <linux/of_gpio.h> |
| 24 | #include <linux/of_irq.h> |
| 25 | #include <linux/module.h> |
| 26 | |
| 27 | #include <net/nfc/nfc.h> |
| 28 | |
| 29 | #include "s3fwrn5.h" |
| 30 | |
| 31 | #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c" |
| 32 | |
| 33 | #define S3FWRN5_I2C_MAX_PAYLOAD 32 |
| 34 | #define S3FWRN5_EN_WAIT_TIME 150 |
| 35 | |
| 36 | struct s3fwrn5_i2c_phy { |
| 37 | struct i2c_client *i2c_dev; |
| 38 | struct nci_dev *ndev; |
| 39 | |
| 40 | unsigned int gpio_en; |
| 41 | unsigned int gpio_fw_wake; |
| 42 | |
| 43 | struct mutex mutex; |
| 44 | |
| 45 | enum s3fwrn5_mode mode; |
| 46 | unsigned int irq_skip:1; |
| 47 | }; |
| 48 | |
| 49 | static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake) |
| 50 | { |
| 51 | struct s3fwrn5_i2c_phy *phy = phy_id; |
| 52 | |
| 53 | mutex_lock(&phy->mutex); |
| 54 | gpio_set_value(phy->gpio_fw_wake, wake); |
| 55 | msleep(S3FWRN5_EN_WAIT_TIME/2); |
| 56 | mutex_unlock(&phy->mutex); |
| 57 | } |
| 58 | |
| 59 | static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode) |
| 60 | { |
| 61 | struct s3fwrn5_i2c_phy *phy = phy_id; |
| 62 | |
| 63 | mutex_lock(&phy->mutex); |
| 64 | |
| 65 | if (phy->mode == mode) |
| 66 | goto out; |
| 67 | |
| 68 | phy->mode = mode; |
| 69 | |
| 70 | gpio_set_value(phy->gpio_en, 1); |
| 71 | gpio_set_value(phy->gpio_fw_wake, 0); |
| 72 | if (mode == S3FWRN5_MODE_FW) |
| 73 | gpio_set_value(phy->gpio_fw_wake, 1); |
| 74 | |
| 75 | if (mode != S3FWRN5_MODE_COLD) { |
| 76 | msleep(S3FWRN5_EN_WAIT_TIME); |
| 77 | gpio_set_value(phy->gpio_en, 0); |
| 78 | msleep(S3FWRN5_EN_WAIT_TIME/2); |
| 79 | } |
| 80 | |
| 81 | phy->irq_skip = true; |
| 82 | |
| 83 | out: |
| 84 | mutex_unlock(&phy->mutex); |
| 85 | } |
| 86 | |
| 87 | static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id) |
| 88 | { |
| 89 | struct s3fwrn5_i2c_phy *phy = phy_id; |
| 90 | enum s3fwrn5_mode mode; |
| 91 | |
| 92 | mutex_lock(&phy->mutex); |
| 93 | |
| 94 | mode = phy->mode; |
| 95 | |
| 96 | mutex_unlock(&phy->mutex); |
| 97 | |
| 98 | return mode; |
| 99 | } |
| 100 | |
| 101 | static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb) |
| 102 | { |
| 103 | struct s3fwrn5_i2c_phy *phy = phy_id; |
| 104 | int ret; |
| 105 | |
| 106 | mutex_lock(&phy->mutex); |
| 107 | |
| 108 | phy->irq_skip = false; |
| 109 | |
| 110 | ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len); |
| 111 | if (ret == -EREMOTEIO) { |
| 112 | /* Retry, chip was in standby */ |
| 113 | usleep_range(110000, 120000); |
| 114 | ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len); |
| 115 | } |
| 116 | |
| 117 | mutex_unlock(&phy->mutex); |
| 118 | |
| 119 | if (ret < 0) |
| 120 | return ret; |
| 121 | |
| 122 | if (ret != skb->len) |
| 123 | return -EREMOTEIO; |
| 124 | |
| 125 | return 0; |
| 126 | } |
| 127 | |
| 128 | static struct s3fwrn5_phy_ops i2c_phy_ops = { |
| 129 | .set_wake = s3fwrn5_i2c_set_wake, |
| 130 | .set_mode = s3fwrn5_i2c_set_mode, |
| 131 | .get_mode = s3fwrn5_i2c_get_mode, |
| 132 | .write = s3fwrn5_i2c_write, |
| 133 | }; |
| 134 | |
| 135 | static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy) |
| 136 | { |
| 137 | struct sk_buff *skb; |
| 138 | size_t hdr_size; |
| 139 | size_t data_len; |
| 140 | char hdr[4]; |
| 141 | int ret; |
| 142 | |
| 143 | hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ? |
| 144 | NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE; |
| 145 | ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size); |
| 146 | if (ret < 0) |
| 147 | return ret; |
| 148 | |
| 149 | if (ret < hdr_size) |
| 150 | return -EBADMSG; |
| 151 | |
| 152 | data_len = (phy->mode == S3FWRN5_MODE_NCI) ? |
| 153 | ((struct nci_ctrl_hdr *)hdr)->plen : |
| 154 | ((struct s3fwrn5_fw_header *)hdr)->len; |
| 155 | |
| 156 | skb = alloc_skb(hdr_size + data_len, GFP_KERNEL); |
| 157 | if (!skb) |
| 158 | return -ENOMEM; |
| 159 | |
| 160 | memcpy(skb_put(skb, hdr_size), hdr, hdr_size); |
| 161 | |
| 162 | if (data_len == 0) |
| 163 | goto out; |
| 164 | |
| 165 | ret = i2c_master_recv(phy->i2c_dev, skb_put(skb, data_len), data_len); |
| 166 | if (ret != data_len) { |
| 167 | kfree_skb(skb); |
| 168 | return -EBADMSG; |
| 169 | } |
| 170 | |
| 171 | out: |
| 172 | return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode); |
| 173 | } |
| 174 | |
| 175 | static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id) |
| 176 | { |
| 177 | struct s3fwrn5_i2c_phy *phy = phy_id; |
| 178 | int ret = 0; |
| 179 | |
| 180 | if (!phy || !phy->ndev) { |
| 181 | WARN_ON_ONCE(1); |
| 182 | return IRQ_NONE; |
| 183 | } |
| 184 | |
| 185 | mutex_lock(&phy->mutex); |
| 186 | |
| 187 | if (phy->irq_skip) |
| 188 | goto out; |
| 189 | |
| 190 | switch (phy->mode) { |
| 191 | case S3FWRN5_MODE_NCI: |
| 192 | case S3FWRN5_MODE_FW: |
| 193 | ret = s3fwrn5_i2c_read(phy); |
| 194 | break; |
| 195 | case S3FWRN5_MODE_COLD: |
| 196 | ret = -EREMOTEIO; |
| 197 | break; |
| 198 | } |
| 199 | |
| 200 | out: |
| 201 | mutex_unlock(&phy->mutex); |
| 202 | |
| 203 | return IRQ_HANDLED; |
| 204 | } |
| 205 | |
| 206 | static int s3fwrn5_i2c_parse_dt(struct i2c_client *client) |
| 207 | { |
| 208 | struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); |
| 209 | struct device_node *np = client->dev.of_node; |
| 210 | |
| 211 | if (!np) |
| 212 | return -ENODEV; |
| 213 | |
| 214 | phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0); |
| 215 | if (!gpio_is_valid(phy->gpio_en)) |
| 216 | return -ENODEV; |
| 217 | |
| 218 | phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0); |
| 219 | if (!gpio_is_valid(phy->gpio_fw_wake)) |
| 220 | return -ENODEV; |
| 221 | |
| 222 | return 0; |
| 223 | } |
| 224 | |
| 225 | static int s3fwrn5_i2c_probe(struct i2c_client *client, |
| 226 | const struct i2c_device_id *id) |
| 227 | { |
| 228 | struct s3fwrn5_i2c_phy *phy; |
| 229 | int ret; |
| 230 | |
| 231 | phy = devm_kzalloc(&client->dev, sizeof(*phy), GFP_KERNEL); |
| 232 | if (!phy) |
| 233 | return -ENOMEM; |
| 234 | |
| 235 | mutex_init(&phy->mutex); |
| 236 | phy->mode = S3FWRN5_MODE_COLD; |
| 237 | phy->irq_skip = true; |
| 238 | |
| 239 | phy->i2c_dev = client; |
| 240 | i2c_set_clientdata(client, phy); |
| 241 | |
| 242 | ret = s3fwrn5_i2c_parse_dt(client); |
| 243 | if (ret < 0) |
| 244 | return ret; |
| 245 | |
| 246 | ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en, |
| 247 | GPIOF_OUT_INIT_HIGH, "s3fwrn5_en"); |
| 248 | if (ret < 0) |
| 249 | return ret; |
| 250 | |
| 251 | ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake, |
| 252 | GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake"); |
| 253 | if (ret < 0) |
| 254 | return ret; |
| 255 | |
| 256 | ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops, |
| 257 | S3FWRN5_I2C_MAX_PAYLOAD); |
| 258 | if (ret < 0) |
| 259 | return ret; |
| 260 | |
Axel Lin | d7e7f02 | 2015-09-22 17:49:26 +0800 | [diff] [blame^] | 261 | ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL, |
Robert Baldyga | c04c674 | 2015-08-20 17:26:02 +0200 | [diff] [blame] | 262 | s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, |
| 263 | S3FWRN5_I2C_DRIVER_NAME, phy); |
| 264 | if (ret) |
| 265 | s3fwrn5_remove(phy->ndev); |
| 266 | |
| 267 | return ret; |
| 268 | } |
| 269 | |
| 270 | static int s3fwrn5_i2c_remove(struct i2c_client *client) |
| 271 | { |
| 272 | struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client); |
| 273 | |
| 274 | s3fwrn5_remove(phy->ndev); |
| 275 | |
| 276 | return 0; |
| 277 | } |
| 278 | |
| 279 | static struct i2c_device_id s3fwrn5_i2c_id_table[] = { |
| 280 | {S3FWRN5_I2C_DRIVER_NAME, 0}, |
| 281 | {} |
| 282 | }; |
| 283 | MODULE_DEVICE_TABLE(i2c, s3fwrn5_i2c_id_table); |
| 284 | |
| 285 | static const struct of_device_id of_s3fwrn5_i2c_match[] = { |
| 286 | { .compatible = "samsung,s3fwrn5-i2c", }, |
| 287 | {} |
| 288 | }; |
| 289 | MODULE_DEVICE_TABLE(of, of_s3fwrn5_i2c_match); |
| 290 | |
| 291 | static struct i2c_driver s3fwrn5_i2c_driver = { |
| 292 | .driver = { |
| 293 | .owner = THIS_MODULE, |
| 294 | .name = S3FWRN5_I2C_DRIVER_NAME, |
| 295 | .of_match_table = of_match_ptr(of_s3fwrn5_i2c_match), |
| 296 | }, |
| 297 | .probe = s3fwrn5_i2c_probe, |
| 298 | .remove = s3fwrn5_i2c_remove, |
| 299 | .id_table = s3fwrn5_i2c_id_table, |
| 300 | }; |
| 301 | |
| 302 | module_i2c_driver(s3fwrn5_i2c_driver); |
| 303 | |
| 304 | MODULE_LICENSE("GPL"); |
| 305 | MODULE_DESCRIPTION("I2C driver for Samsung S3FWRN5"); |
| 306 | MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>"); |