blob: f05e39f7aad943c2e5591cda8aac4b4336d524de [file] [log] [blame]
Giuliano Pochinidd7b2542006-06-28 13:53:41 +02001/****************************************************************************
2
3 Copyright Echo Digital Audio Corporation (c) 1998 - 2004
4 All rights reserved
5 www.echoaudio.com
6
7 This file is part of Echo Digital Audio's generic driver library.
8
9 Echo Digital Audio's generic driver library is free software;
10 you can redistribute it and/or modify it under the terms of
11 the GNU General Public License as published by the Free Software
12 Foundation.
13
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
18
19 You should have received a copy of the GNU General Public License
20 along with this program; if not, write to the Free Software
21 Foundation, Inc., 59 Temple Place - Suite 330, Boston,
22 MA 02111-1307, USA.
23
24 *************************************************************************
25
26 Translation from C++ and adaptation for use in ALSA-Driver
27 were made by Giuliano Pochini <pochini@shiny.it>
28
29****************************************************************************/
30
31
32static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
33 int gain);
34static int update_vmixer_level(struct echoaudio *chip);
35
36
37static int init_hw(struct echoaudio *chip, u16 device_id, u16 subdevice_id)
38{
39 int err;
40
41 DE_INIT(("init_hw() - Indigo\n"));
Takashi Iwaida3cec32008-08-08 17:12:14 +020042 if (snd_BUG_ON((subdevice_id & 0xfff0) != INDIGO))
43 return -ENODEV;
Giuliano Pochinidd7b2542006-06-28 13:53:41 +020044
45 if ((err = init_dsp_comm_page(chip))) {
46 DE_INIT(("init_hw - could not initialize DSP comm page\n"));
47 return err;
48 }
49
50 chip->device_id = device_id;
51 chip->subdevice_id = subdevice_id;
52 chip->bad_board = TRUE;
53 chip->dsp_code_to_load = &card_fw[FW_INDIGO_DSP];
54 /* Since this card has no ASIC, mark it as loaded so everything
55 works OK */
56 chip->asic_loaded = TRUE;
57 chip->input_clock_types = ECHO_CLOCK_BIT_INTERNAL;
58
59 if ((err = load_firmware(chip)) < 0)
60 return err;
61 chip->bad_board = FALSE;
62
63 if ((err = init_line_levels(chip)) < 0)
64 return err;
65
66 /* Default routing of the virtual channels: all vchannels are routed
67 to the stereo output */
68 set_vmixer_gain(chip, 0, 0, 0);
69 set_vmixer_gain(chip, 1, 1, 0);
70 set_vmixer_gain(chip, 0, 2, 0);
71 set_vmixer_gain(chip, 1, 3, 0);
72 set_vmixer_gain(chip, 0, 4, 0);
73 set_vmixer_gain(chip, 1, 5, 0);
74 set_vmixer_gain(chip, 0, 6, 0);
75 set_vmixer_gain(chip, 1, 7, 0);
76 err = update_vmixer_level(chip);
77
78 DE_INIT(("init_hw done\n"));
79 return err;
80}
81
82
83
84static u32 detect_input_clocks(const struct echoaudio *chip)
85{
86 return ECHO_CLOCK_BIT_INTERNAL;
87}
88
89
90
91/* The Indigo has no ASIC. Just do nothing */
92static int load_asic(struct echoaudio *chip)
93{
94 return 0;
95}
96
97
98
99static int set_sample_rate(struct echoaudio *chip, u32 rate)
100{
101 u32 control_reg;
102
103 switch (rate) {
104 case 96000:
105 control_reg = MIA_96000;
106 break;
107 case 88200:
108 control_reg = MIA_88200;
109 break;
110 case 48000:
111 control_reg = MIA_48000;
112 break;
113 case 44100:
114 control_reg = MIA_44100;
115 break;
116 case 32000:
117 control_reg = MIA_32000;
118 break;
119 default:
120 DE_ACT(("set_sample_rate: %d invalid!\n", rate));
121 return -EINVAL;
122 }
123
124 /* Set the control register if it has changed */
125 if (control_reg != le32_to_cpu(chip->comm_page->control_register)) {
126 if (wait_handshake(chip))
127 return -EIO;
128
129 chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */
130 chip->comm_page->control_register = cpu_to_le32(control_reg);
131 chip->sample_rate = rate;
132
133 clear_handshake(chip);
134 return send_vector(chip, DSP_VC_UPDATE_CLOCKS);
135 }
136 return 0;
137}
138
139
140
141/* This function routes the sound from a virtual channel to a real output */
142static int set_vmixer_gain(struct echoaudio *chip, u16 output, u16 pipe,
143 int gain)
144{
145 int index;
146
Takashi Iwaida3cec32008-08-08 17:12:14 +0200147 if (snd_BUG_ON(pipe >= num_pipes_out(chip) ||
148 output >= num_busses_out(chip)))
149 return -EINVAL;
Giuliano Pochinidd7b2542006-06-28 13:53:41 +0200150
151 if (wait_handshake(chip))
152 return -EIO;
153
154 chip->vmixer_gain[output][pipe] = gain;
155 index = output * num_pipes_out(chip) + pipe;
156 chip->comm_page->vmixer[index] = gain;
157
158 DE_ACT(("set_vmixer_gain: pipe %d, out %d = %d\n", pipe, output, gain));
159 return 0;
160}
161
162
163
164/* Tell the DSP to read and update virtual mixer levels in comm page. */
165static int update_vmixer_level(struct echoaudio *chip)
166{
167 if (wait_handshake(chip))
168 return -EIO;
169 clear_handshake(chip);
170 return send_vector(chip, DSP_VC_SET_VMIXER_GAIN);
171}
172