Masahiro Yamada | e7ecbc0 | 2015-10-02 13:42:19 +0900 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License as published by |
| 6 | * the Free Software Foundation; either version 2 of the License, or |
| 7 | * (at your option) any later version. |
| 8 | * |
| 9 | * This program is distributed in the hope that it will be useful, |
| 10 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 11 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 12 | * GNU General Public License for more details. |
| 13 | */ |
| 14 | |
| 15 | #define pr_fmt(fmt) "uniphier: " fmt |
| 16 | |
| 17 | #include <linux/init.h> |
| 18 | #include <linux/io.h> |
| 19 | #include <linux/log2.h> |
| 20 | #include <linux/of_address.h> |
| 21 | #include <linux/slab.h> |
| 22 | #include <asm/hardware/cache-uniphier.h> |
| 23 | #include <asm/outercache.h> |
| 24 | |
| 25 | /* control registers */ |
| 26 | #define UNIPHIER_SSCC 0x0 /* Control Register */ |
| 27 | #define UNIPHIER_SSCC_BST BIT(20) /* UCWG burst read */ |
| 28 | #define UNIPHIER_SSCC_ACT BIT(19) /* Inst-Data separate */ |
| 29 | #define UNIPHIER_SSCC_WTG BIT(18) /* WT gathering on */ |
| 30 | #define UNIPHIER_SSCC_PRD BIT(17) /* enable pre-fetch */ |
| 31 | #define UNIPHIER_SSCC_ON BIT(0) /* enable cache */ |
| 32 | #define UNIPHIER_SSCLPDAWCR 0x30 /* Unified/Data Active Way Control */ |
| 33 | #define UNIPHIER_SSCLPIAWCR 0x34 /* Instruction Active Way Control */ |
| 34 | |
| 35 | /* revision registers */ |
| 36 | #define UNIPHIER_SSCID 0x0 /* ID Register */ |
| 37 | |
| 38 | /* operation registers */ |
| 39 | #define UNIPHIER_SSCOPE 0x244 /* Cache Operation Primitive Entry */ |
| 40 | #define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */ |
| 41 | #define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */ |
| 42 | #define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */ |
| 43 | #define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */ |
| 44 | #define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */ |
| 45 | #define UNIPHIER_SSCOQM 0x248 /* Cache Operation Queue Mode */ |
| 46 | #define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21) |
| 47 | #define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21) |
| 48 | #define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21) |
| 49 | #define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21) |
| 50 | #define UNIPHIER_SSCOQM_S_MASK (0x3 << 17) |
| 51 | #define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17) |
| 52 | #define UNIPHIER_SSCOQM_S_ALL (0x1 << 17) |
| 53 | #define UNIPHIER_SSCOQM_S_WAY (0x2 << 17) |
| 54 | #define UNIPHIER_SSCOQM_CE BIT(15) /* notify completion */ |
| 55 | #define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */ |
| 56 | #define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */ |
| 57 | #define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */ |
| 58 | #define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */ |
| 59 | #define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */ |
| 60 | #define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */ |
| 61 | #define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */ |
| 62 | #define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */ |
| 63 | #define UNIPHIER_SSCOQAD 0x24c /* Cache Operation Queue Address */ |
| 64 | #define UNIPHIER_SSCOQSZ 0x250 /* Cache Operation Queue Size */ |
| 65 | #define UNIPHIER_SSCOQMASK 0x254 /* Cache Operation Queue Address Mask */ |
| 66 | #define UNIPHIER_SSCOQWN 0x258 /* Cache Operation Queue Way Number */ |
| 67 | #define UNIPHIER_SSCOPPQSEF 0x25c /* Cache Operation Queue Set Complete*/ |
| 68 | #define UNIPHIER_SSCOPPQSEF_FE BIT(1) |
| 69 | #define UNIPHIER_SSCOPPQSEF_OE BIT(0) |
| 70 | #define UNIPHIER_SSCOLPQS 0x260 /* Cache Operation Queue Status */ |
| 71 | #define UNIPHIER_SSCOLPQS_EF BIT(2) |
| 72 | #define UNIPHIER_SSCOLPQS_EST BIT(1) |
| 73 | #define UNIPHIER_SSCOLPQS_QST BIT(0) |
| 74 | |
| 75 | /* Is the touch/pre-fetch destination specified by ways? */ |
| 76 | #define UNIPHIER_SSCOQM_TID_IS_WAY(op) \ |
| 77 | ((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY) |
| 78 | /* Is the operation region specified by address range? */ |
| 79 | #define UNIPHIER_SSCOQM_S_IS_RANGE(op) \ |
| 80 | ((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE) |
| 81 | |
| 82 | /** |
| 83 | * uniphier_cache_data - UniPhier outer cache specific data |
| 84 | * |
| 85 | * @ctrl_base: virtual base address of control registers |
| 86 | * @rev_base: virtual base address of revision registers |
| 87 | * @op_base: virtual base address of operation registers |
| 88 | * @way_present_mask: each bit specifies if the way is present |
| 89 | * @way_locked_mask: each bit specifies if the way is locked |
| 90 | * @nsets: number of associativity sets |
| 91 | * @line_size: line size in bytes |
| 92 | * @range_op_max_size: max size that can be handled by a single range operation |
| 93 | * @list: list node to include this level in the whole cache hierarchy |
| 94 | */ |
| 95 | struct uniphier_cache_data { |
| 96 | void __iomem *ctrl_base; |
| 97 | void __iomem *rev_base; |
| 98 | void __iomem *op_base; |
Masahiro Yamada | 6427a84 | 2016-04-26 09:11:13 +0100 | [diff] [blame] | 99 | void __iomem *way_ctrl_base; |
Masahiro Yamada | e7ecbc0 | 2015-10-02 13:42:19 +0900 | [diff] [blame] | 100 | u32 way_present_mask; |
| 101 | u32 way_locked_mask; |
| 102 | u32 nsets; |
| 103 | u32 line_size; |
| 104 | u32 range_op_max_size; |
| 105 | struct list_head list; |
| 106 | }; |
| 107 | |
| 108 | /* |
| 109 | * List of the whole outer cache hierarchy. This list is only modified during |
| 110 | * the early boot stage, so no mutex is taken for the access to the list. |
| 111 | */ |
| 112 | static LIST_HEAD(uniphier_cache_list); |
| 113 | |
| 114 | /** |
| 115 | * __uniphier_cache_sync - perform a sync point for a particular cache level |
| 116 | * |
| 117 | * @data: cache controller specific data |
| 118 | */ |
| 119 | static void __uniphier_cache_sync(struct uniphier_cache_data *data) |
| 120 | { |
| 121 | /* This sequence need not be atomic. Do not disable IRQ. */ |
| 122 | writel_relaxed(UNIPHIER_SSCOPE_CM_SYNC, |
| 123 | data->op_base + UNIPHIER_SSCOPE); |
| 124 | /* need a read back to confirm */ |
| 125 | readl_relaxed(data->op_base + UNIPHIER_SSCOPE); |
| 126 | } |
| 127 | |
| 128 | /** |
| 129 | * __uniphier_cache_maint_common - run a queue operation for a particular level |
| 130 | * |
| 131 | * @data: cache controller specific data |
| 132 | * @start: start address of range operation (don't care for "all" operation) |
| 133 | * @size: data size of range operation (don't care for "all" operation) |
| 134 | * @operation: flags to specify the desired cache operation |
| 135 | */ |
| 136 | static void __uniphier_cache_maint_common(struct uniphier_cache_data *data, |
| 137 | unsigned long start, |
| 138 | unsigned long size, |
| 139 | u32 operation) |
| 140 | { |
| 141 | unsigned long flags; |
| 142 | |
| 143 | /* |
| 144 | * No spin lock is necessary here because: |
| 145 | * |
| 146 | * [1] This outer cache controller is able to accept maintenance |
| 147 | * operations from multiple CPUs at a time in an SMP system; if a |
| 148 | * maintenance operation is under way and another operation is issued, |
| 149 | * the new one is stored in the queue. The controller performs one |
| 150 | * operation after another. If the queue is full, the status register, |
| 151 | * UNIPHIER_SSCOPPQSEF, indicates that the queue registration has |
| 152 | * failed. The status registers, UNIPHIER_{SSCOPPQSEF, SSCOLPQS}, have |
| 153 | * different instances for each CPU, i.e. each CPU can track the status |
| 154 | * of the maintenance operations triggered by itself. |
| 155 | * |
| 156 | * [2] The cache command registers, UNIPHIER_{SSCOQM, SSCOQAD, SSCOQSZ, |
| 157 | * SSCOQWN}, are shared between multiple CPUs, but the hardware still |
| 158 | * guarantees the registration sequence is atomic; the write access to |
| 159 | * them are arbitrated by the hardware. The first accessor to the |
| 160 | * register, UNIPHIER_SSCOQM, holds the access right and it is released |
| 161 | * by reading the status register, UNIPHIER_SSCOPPQSEF. While one CPU |
| 162 | * is holding the access right, other CPUs fail to register operations. |
| 163 | * One CPU should not hold the access right for a long time, so local |
| 164 | * IRQs should be disabled while the following sequence. |
| 165 | */ |
| 166 | local_irq_save(flags); |
| 167 | |
| 168 | /* clear the complete notification flag */ |
| 169 | writel_relaxed(UNIPHIER_SSCOLPQS_EF, data->op_base + UNIPHIER_SSCOLPQS); |
| 170 | |
| 171 | do { |
| 172 | /* set cache operation */ |
| 173 | writel_relaxed(UNIPHIER_SSCOQM_CE | operation, |
| 174 | data->op_base + UNIPHIER_SSCOQM); |
| 175 | |
| 176 | /* set address range if needed */ |
| 177 | if (likely(UNIPHIER_SSCOQM_S_IS_RANGE(operation))) { |
| 178 | writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD); |
| 179 | writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ); |
| 180 | } |
| 181 | |
| 182 | /* set target ways if needed */ |
| 183 | if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation))) |
| 184 | writel_relaxed(data->way_locked_mask, |
| 185 | data->op_base + UNIPHIER_SSCOQWN); |
| 186 | } while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) & |
| 187 | (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE))); |
| 188 | |
| 189 | /* wait until the operation is completed */ |
| 190 | while (likely(readl_relaxed(data->op_base + UNIPHIER_SSCOLPQS) != |
| 191 | UNIPHIER_SSCOLPQS_EF)) |
| 192 | cpu_relax(); |
| 193 | |
| 194 | local_irq_restore(flags); |
| 195 | } |
| 196 | |
| 197 | static void __uniphier_cache_maint_all(struct uniphier_cache_data *data, |
| 198 | u32 operation) |
| 199 | { |
| 200 | __uniphier_cache_maint_common(data, 0, 0, |
| 201 | UNIPHIER_SSCOQM_S_ALL | operation); |
| 202 | |
| 203 | __uniphier_cache_sync(data); |
| 204 | } |
| 205 | |
| 206 | static void __uniphier_cache_maint_range(struct uniphier_cache_data *data, |
| 207 | unsigned long start, unsigned long end, |
| 208 | u32 operation) |
| 209 | { |
| 210 | unsigned long size; |
| 211 | |
| 212 | /* |
| 213 | * If the start address is not aligned, |
| 214 | * perform a cache operation for the first cache-line |
| 215 | */ |
| 216 | start = start & ~(data->line_size - 1); |
| 217 | |
| 218 | size = end - start; |
| 219 | |
| 220 | if (unlikely(size >= (unsigned long)(-data->line_size))) { |
| 221 | /* this means cache operation for all range */ |
| 222 | __uniphier_cache_maint_all(data, operation); |
| 223 | return; |
| 224 | } |
| 225 | |
| 226 | /* |
| 227 | * If the end address is not aligned, |
| 228 | * perform a cache operation for the last cache-line |
| 229 | */ |
| 230 | size = ALIGN(size, data->line_size); |
| 231 | |
| 232 | while (size) { |
| 233 | unsigned long chunk_size = min_t(unsigned long, size, |
| 234 | data->range_op_max_size); |
| 235 | |
| 236 | __uniphier_cache_maint_common(data, start, chunk_size, |
| 237 | UNIPHIER_SSCOQM_S_RANGE | operation); |
| 238 | |
| 239 | start += chunk_size; |
| 240 | size -= chunk_size; |
| 241 | } |
| 242 | |
| 243 | __uniphier_cache_sync(data); |
| 244 | } |
| 245 | |
| 246 | static void __uniphier_cache_enable(struct uniphier_cache_data *data, bool on) |
| 247 | { |
| 248 | u32 val = 0; |
| 249 | |
| 250 | if (on) |
| 251 | val = UNIPHIER_SSCC_WTG | UNIPHIER_SSCC_PRD | UNIPHIER_SSCC_ON; |
| 252 | |
| 253 | writel_relaxed(val, data->ctrl_base + UNIPHIER_SSCC); |
| 254 | } |
| 255 | |
| 256 | static void __init __uniphier_cache_set_locked_ways( |
| 257 | struct uniphier_cache_data *data, |
| 258 | u32 way_mask) |
| 259 | { |
Masahiro Yamada | 6427a84 | 2016-04-26 09:11:13 +0100 | [diff] [blame] | 260 | unsigned int cpu; |
| 261 | |
Masahiro Yamada | e7ecbc0 | 2015-10-02 13:42:19 +0900 | [diff] [blame] | 262 | data->way_locked_mask = way_mask & data->way_present_mask; |
| 263 | |
Masahiro Yamada | 6427a84 | 2016-04-26 09:11:13 +0100 | [diff] [blame] | 264 | for_each_possible_cpu(cpu) |
| 265 | writel_relaxed(~data->way_locked_mask & data->way_present_mask, |
| 266 | data->way_ctrl_base + 4 * cpu); |
Masahiro Yamada | e7ecbc0 | 2015-10-02 13:42:19 +0900 | [diff] [blame] | 267 | } |
| 268 | |
| 269 | static void uniphier_cache_maint_range(unsigned long start, unsigned long end, |
| 270 | u32 operation) |
| 271 | { |
| 272 | struct uniphier_cache_data *data; |
| 273 | |
| 274 | list_for_each_entry(data, &uniphier_cache_list, list) |
| 275 | __uniphier_cache_maint_range(data, start, end, operation); |
| 276 | } |
| 277 | |
| 278 | static void uniphier_cache_maint_all(u32 operation) |
| 279 | { |
| 280 | struct uniphier_cache_data *data; |
| 281 | |
| 282 | list_for_each_entry(data, &uniphier_cache_list, list) |
| 283 | __uniphier_cache_maint_all(data, operation); |
| 284 | } |
| 285 | |
| 286 | static void uniphier_cache_inv_range(unsigned long start, unsigned long end) |
| 287 | { |
| 288 | uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV); |
| 289 | } |
| 290 | |
| 291 | static void uniphier_cache_clean_range(unsigned long start, unsigned long end) |
| 292 | { |
| 293 | uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN); |
| 294 | } |
| 295 | |
| 296 | static void uniphier_cache_flush_range(unsigned long start, unsigned long end) |
| 297 | { |
| 298 | uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH); |
| 299 | } |
| 300 | |
| 301 | static void __init uniphier_cache_inv_all(void) |
| 302 | { |
| 303 | uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV); |
| 304 | } |
| 305 | |
| 306 | static void uniphier_cache_flush_all(void) |
| 307 | { |
| 308 | uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH); |
| 309 | } |
| 310 | |
| 311 | static void uniphier_cache_disable(void) |
| 312 | { |
| 313 | struct uniphier_cache_data *data; |
| 314 | |
| 315 | list_for_each_entry_reverse(data, &uniphier_cache_list, list) |
| 316 | __uniphier_cache_enable(data, false); |
| 317 | |
| 318 | uniphier_cache_flush_all(); |
| 319 | } |
| 320 | |
| 321 | static void __init uniphier_cache_enable(void) |
| 322 | { |
| 323 | struct uniphier_cache_data *data; |
| 324 | |
| 325 | uniphier_cache_inv_all(); |
| 326 | |
| 327 | list_for_each_entry(data, &uniphier_cache_list, list) { |
| 328 | __uniphier_cache_enable(data, true); |
| 329 | __uniphier_cache_set_locked_ways(data, 0); |
| 330 | } |
| 331 | } |
| 332 | |
| 333 | static void uniphier_cache_sync(void) |
| 334 | { |
| 335 | struct uniphier_cache_data *data; |
| 336 | |
| 337 | list_for_each_entry(data, &uniphier_cache_list, list) |
| 338 | __uniphier_cache_sync(data); |
| 339 | } |
| 340 | |
| 341 | int __init uniphier_cache_l2_is_enabled(void) |
| 342 | { |
| 343 | struct uniphier_cache_data *data; |
| 344 | |
| 345 | data = list_first_entry_or_null(&uniphier_cache_list, |
| 346 | struct uniphier_cache_data, list); |
| 347 | if (!data) |
| 348 | return 0; |
| 349 | |
| 350 | return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) & |
| 351 | UNIPHIER_SSCC_ON); |
| 352 | } |
| 353 | |
| 354 | void __init uniphier_cache_l2_touch_range(unsigned long start, |
| 355 | unsigned long end) |
| 356 | { |
| 357 | struct uniphier_cache_data *data; |
| 358 | |
| 359 | data = list_first_entry_or_null(&uniphier_cache_list, |
| 360 | struct uniphier_cache_data, list); |
| 361 | if (data) |
| 362 | __uniphier_cache_maint_range(data, start, end, |
| 363 | UNIPHIER_SSCOQM_TID_WAY | |
| 364 | UNIPHIER_SSCOQM_CM_TOUCH); |
| 365 | } |
| 366 | |
| 367 | void __init uniphier_cache_l2_set_locked_ways(u32 way_mask) |
| 368 | { |
| 369 | struct uniphier_cache_data *data; |
| 370 | |
| 371 | data = list_first_entry_or_null(&uniphier_cache_list, |
| 372 | struct uniphier_cache_data, list); |
| 373 | if (data) |
| 374 | __uniphier_cache_set_locked_ways(data, way_mask); |
| 375 | } |
| 376 | |
| 377 | static const struct of_device_id uniphier_cache_match[] __initconst = { |
| 378 | { |
| 379 | .compatible = "socionext,uniphier-system-cache", |
| 380 | }, |
| 381 | { /* sentinel */ } |
| 382 | }; |
| 383 | |
Masahiro Yamada | e7ecbc0 | 2015-10-02 13:42:19 +0900 | [diff] [blame] | 384 | static int __init __uniphier_cache_init(struct device_node *np, |
| 385 | unsigned int *cache_level) |
| 386 | { |
| 387 | struct uniphier_cache_data *data; |
| 388 | u32 level, cache_size; |
| 389 | struct device_node *next_np; |
| 390 | int ret = 0; |
| 391 | |
| 392 | if (!of_match_node(uniphier_cache_match, np)) { |
| 393 | pr_err("L%d: not compatible with uniphier cache\n", |
| 394 | *cache_level); |
| 395 | return -EINVAL; |
| 396 | } |
| 397 | |
| 398 | if (of_property_read_u32(np, "cache-level", &level)) { |
| 399 | pr_err("L%d: cache-level is not specified\n", *cache_level); |
| 400 | return -EINVAL; |
| 401 | } |
| 402 | |
| 403 | if (level != *cache_level) { |
| 404 | pr_err("L%d: cache-level is unexpected value %d\n", |
| 405 | *cache_level, level); |
| 406 | return -EINVAL; |
| 407 | } |
| 408 | |
| 409 | if (!of_property_read_bool(np, "cache-unified")) { |
| 410 | pr_err("L%d: cache-unified is not specified\n", *cache_level); |
| 411 | return -EINVAL; |
| 412 | } |
| 413 | |
| 414 | data = kzalloc(sizeof(*data), GFP_KERNEL); |
| 415 | if (!data) |
| 416 | return -ENOMEM; |
| 417 | |
| 418 | if (of_property_read_u32(np, "cache-line-size", &data->line_size) || |
| 419 | !is_power_of_2(data->line_size)) { |
| 420 | pr_err("L%d: cache-line-size is unspecified or invalid\n", |
| 421 | *cache_level); |
| 422 | ret = -EINVAL; |
| 423 | goto err; |
| 424 | } |
| 425 | |
| 426 | if (of_property_read_u32(np, "cache-sets", &data->nsets) || |
| 427 | !is_power_of_2(data->nsets)) { |
| 428 | pr_err("L%d: cache-sets is unspecified or invalid\n", |
| 429 | *cache_level); |
| 430 | ret = -EINVAL; |
| 431 | goto err; |
| 432 | } |
| 433 | |
| 434 | if (of_property_read_u32(np, "cache-size", &cache_size) || |
| 435 | cache_size == 0 || cache_size % (data->nsets * data->line_size)) { |
| 436 | pr_err("L%d: cache-size is unspecified or invalid\n", |
| 437 | *cache_level); |
| 438 | ret = -EINVAL; |
| 439 | goto err; |
| 440 | } |
| 441 | |
| 442 | data->way_present_mask = |
| 443 | ((u32)1 << cache_size / data->nsets / data->line_size) - 1; |
| 444 | |
| 445 | data->ctrl_base = of_iomap(np, 0); |
| 446 | if (!data->ctrl_base) { |
| 447 | pr_err("L%d: failed to map control register\n", *cache_level); |
| 448 | ret = -ENOMEM; |
| 449 | goto err; |
| 450 | } |
| 451 | |
| 452 | data->rev_base = of_iomap(np, 1); |
| 453 | if (!data->rev_base) { |
| 454 | pr_err("L%d: failed to map revision register\n", *cache_level); |
| 455 | ret = -ENOMEM; |
| 456 | goto err; |
| 457 | } |
| 458 | |
| 459 | data->op_base = of_iomap(np, 2); |
| 460 | if (!data->op_base) { |
| 461 | pr_err("L%d: failed to map operation register\n", *cache_level); |
| 462 | ret = -ENOMEM; |
| 463 | goto err; |
| 464 | } |
| 465 | |
Masahiro Yamada | 6427a84 | 2016-04-26 09:11:13 +0100 | [diff] [blame] | 466 | data->way_ctrl_base = data->ctrl_base + 0xc00; |
| 467 | |
Masahiro Yamada | e7ecbc0 | 2015-10-02 13:42:19 +0900 | [diff] [blame] | 468 | if (*cache_level == 2) { |
| 469 | u32 revision = readl(data->rev_base + UNIPHIER_SSCID); |
| 470 | /* |
| 471 | * The size of range operation is limited to (1 << 22) or less |
| 472 | * for PH-sLD8 or older SoCs. |
| 473 | */ |
| 474 | if (revision <= 0x16) |
| 475 | data->range_op_max_size = (u32)1 << 22; |
Masahiro Yamada | 6427a84 | 2016-04-26 09:11:13 +0100 | [diff] [blame] | 476 | |
| 477 | /* |
| 478 | * Unfortunatly, the offset address of active way control base |
| 479 | * varies from SoC to SoC. |
| 480 | */ |
| 481 | switch (revision) { |
| 482 | case 0x11: /* sLD3 */ |
| 483 | data->way_ctrl_base = data->ctrl_base + 0x870; |
| 484 | break; |
| 485 | case 0x12: /* LD4 */ |
| 486 | case 0x16: /* sld8 */ |
| 487 | data->way_ctrl_base = data->ctrl_base + 0x840; |
| 488 | break; |
| 489 | default: |
| 490 | break; |
| 491 | } |
Masahiro Yamada | e7ecbc0 | 2015-10-02 13:42:19 +0900 | [diff] [blame] | 492 | } |
| 493 | |
| 494 | data->range_op_max_size -= data->line_size; |
| 495 | |
| 496 | INIT_LIST_HEAD(&data->list); |
| 497 | list_add_tail(&data->list, &uniphier_cache_list); /* no mutex */ |
| 498 | |
| 499 | /* |
| 500 | * OK, this level has been successfully initialized. Look for the next |
| 501 | * level cache. Do not roll back even if the initialization of the |
| 502 | * next level cache fails because we want to continue with available |
| 503 | * cache levels. |
| 504 | */ |
Masahiro Yamada | 89e69fb | 2015-11-24 17:01:10 +0100 | [diff] [blame] | 505 | next_np = of_find_next_cache_node(np); |
Masahiro Yamada | e7ecbc0 | 2015-10-02 13:42:19 +0900 | [diff] [blame] | 506 | if (next_np) { |
| 507 | (*cache_level)++; |
| 508 | ret = __uniphier_cache_init(next_np, cache_level); |
| 509 | } |
| 510 | of_node_put(next_np); |
| 511 | |
| 512 | return ret; |
| 513 | err: |
| 514 | iounmap(data->op_base); |
| 515 | iounmap(data->rev_base); |
| 516 | iounmap(data->ctrl_base); |
| 517 | kfree(data); |
| 518 | |
| 519 | return ret; |
| 520 | } |
| 521 | |
| 522 | int __init uniphier_cache_init(void) |
| 523 | { |
| 524 | struct device_node *np = NULL; |
| 525 | unsigned int cache_level; |
| 526 | int ret = 0; |
| 527 | |
| 528 | /* look for level 2 cache */ |
| 529 | while ((np = of_find_matching_node(np, uniphier_cache_match))) |
| 530 | if (!of_property_read_u32(np, "cache-level", &cache_level) && |
| 531 | cache_level == 2) |
| 532 | break; |
| 533 | |
| 534 | if (!np) |
| 535 | return -ENODEV; |
| 536 | |
| 537 | ret = __uniphier_cache_init(np, &cache_level); |
| 538 | of_node_put(np); |
| 539 | |
| 540 | if (ret) { |
| 541 | /* |
| 542 | * Error out iif L2 initialization fails. Continue with any |
| 543 | * error on L3 or outer because they are optional. |
| 544 | */ |
| 545 | if (cache_level == 2) { |
| 546 | pr_err("failed to initialize L2 cache\n"); |
| 547 | return ret; |
| 548 | } |
| 549 | |
| 550 | cache_level--; |
| 551 | ret = 0; |
| 552 | } |
| 553 | |
| 554 | outer_cache.inv_range = uniphier_cache_inv_range; |
| 555 | outer_cache.clean_range = uniphier_cache_clean_range; |
| 556 | outer_cache.flush_range = uniphier_cache_flush_range; |
| 557 | outer_cache.flush_all = uniphier_cache_flush_all; |
| 558 | outer_cache.disable = uniphier_cache_disable; |
| 559 | outer_cache.sync = uniphier_cache_sync; |
| 560 | |
| 561 | uniphier_cache_enable(); |
| 562 | |
| 563 | pr_info("enabled outer cache (cache level: %d)\n", cache_level); |
| 564 | |
| 565 | return ret; |
| 566 | } |