Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1 | /* Copyright 2012 STEC, Inc. |
| 2 | * |
| 3 | * This file is licensed under the terms of the 3-clause |
| 4 | * BSD License (http://opensource.org/licenses/BSD-3-Clause) |
| 5 | * or the GNU GPL-2.0 (http://www.gnu.org/licenses/gpl-2.0.html), |
| 6 | * at your option. Both licenses are also available in the LICENSE file |
| 7 | * distributed with this project. This file may not be copied, modified, |
| 8 | * or distributed except in accordance with those terms. |
| 9 | * Gordoni Waidhofer <gwaidhofer@stec-inc.com> |
| 10 | * Initial Driver Design! |
| 11 | * Thomas Swann <tswann@stec-inc.com> |
| 12 | * Interrupt handling. |
| 13 | * Ramprasad Chinthekindi <rchinthekindi@stec-inc.com> |
| 14 | * biomode implementation. |
| 15 | * Akhil Bhansali <abhansali@stec-inc.com> |
| 16 | * Added support for DISCARD / FLUSH and FUA. |
| 17 | */ |
| 18 | |
| 19 | #include <linux/kernel.h> |
| 20 | #include <linux/module.h> |
| 21 | #include <linux/init.h> |
| 22 | #include <linux/pci.h> |
| 23 | #include <linux/slab.h> |
| 24 | #include <linux/spinlock.h> |
| 25 | #include <linux/blkdev.h> |
| 26 | #include <linux/sched.h> |
| 27 | #include <linux/interrupt.h> |
| 28 | #include <linux/compiler.h> |
| 29 | #include <linux/workqueue.h> |
| 30 | #include <linux/bitops.h> |
| 31 | #include <linux/delay.h> |
| 32 | #include <linux/time.h> |
| 33 | #include <linux/hdreg.h> |
| 34 | #include <linux/dma-mapping.h> |
| 35 | #include <linux/completion.h> |
| 36 | #include <linux/scatterlist.h> |
| 37 | #include <linux/version.h> |
| 38 | #include <linux/err.h> |
| 39 | #include <linux/scatterlist.h> |
| 40 | #include <linux/aer.h> |
| 41 | #include <linux/ctype.h> |
| 42 | #include <linux/wait.h> |
| 43 | #include <linux/uio.h> |
| 44 | #include <scsi/scsi.h> |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 45 | #include <scsi/sg.h> |
| 46 | #include <linux/io.h> |
| 47 | #include <linux/uaccess.h> |
Bartlomiej Zolnierkiewicz | 4ca90b5 | 2013-11-05 12:37:04 +0100 | [diff] [blame] | 48 | #include <asm/unaligned.h> |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 49 | |
| 50 | #include "skd_s1120.h" |
| 51 | |
| 52 | static int skd_dbg_level; |
| 53 | static int skd_isr_comp_limit = 4; |
| 54 | |
| 55 | enum { |
| 56 | STEC_LINK_2_5GTS = 0, |
| 57 | STEC_LINK_5GTS = 1, |
| 58 | STEC_LINK_8GTS = 2, |
| 59 | STEC_LINK_UNKNOWN = 0xFF |
| 60 | }; |
| 61 | |
| 62 | enum { |
| 63 | SKD_FLUSH_INITIALIZER, |
| 64 | SKD_FLUSH_ZERO_SIZE_FIRST, |
| 65 | SKD_FLUSH_DATA_SECOND, |
| 66 | }; |
| 67 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 68 | #define SKD_ASSERT(expr) \ |
| 69 | do { \ |
| 70 | if (unlikely(!(expr))) { \ |
| 71 | pr_err("Assertion failed! %s,%s,%s,line=%d\n", \ |
| 72 | # expr, __FILE__, __func__, __LINE__); \ |
| 73 | } \ |
| 74 | } while (0) |
| 75 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 76 | #define DRV_NAME "skd" |
| 77 | #define DRV_VERSION "2.2.1" |
| 78 | #define DRV_BUILD_ID "0260" |
| 79 | #define PFX DRV_NAME ": " |
| 80 | #define DRV_BIN_VERSION 0x100 |
| 81 | #define DRV_VER_COMPL "2.2.1." DRV_BUILD_ID |
| 82 | |
| 83 | MODULE_AUTHOR("bug-reports: support@stec-inc.com"); |
| 84 | MODULE_LICENSE("Dual BSD/GPL"); |
| 85 | |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 86 | MODULE_DESCRIPTION("STEC s1120 PCIe SSD block driver (b" DRV_BUILD_ID ")"); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 87 | MODULE_VERSION(DRV_VERSION "-" DRV_BUILD_ID); |
| 88 | |
| 89 | #define PCI_VENDOR_ID_STEC 0x1B39 |
| 90 | #define PCI_DEVICE_ID_S1120 0x0001 |
| 91 | |
| 92 | #define SKD_FUA_NV (1 << 1) |
| 93 | #define SKD_MINORS_PER_DEVICE 16 |
| 94 | |
| 95 | #define SKD_MAX_QUEUE_DEPTH 200u |
| 96 | |
| 97 | #define SKD_PAUSE_TIMEOUT (5 * 1000) |
| 98 | |
| 99 | #define SKD_N_FITMSG_BYTES (512u) |
| 100 | |
| 101 | #define SKD_N_SPECIAL_CONTEXT 32u |
| 102 | #define SKD_N_SPECIAL_FITMSG_BYTES (128u) |
| 103 | |
| 104 | /* SG elements are 32 bytes, so we can make this 4096 and still be under the |
| 105 | * 128KB limit. That allows 4096*4K = 16M xfer size |
| 106 | */ |
| 107 | #define SKD_N_SG_PER_REQ_DEFAULT 256u |
| 108 | #define SKD_N_SG_PER_SPECIAL 256u |
| 109 | |
| 110 | #define SKD_N_COMPLETION_ENTRY 256u |
| 111 | #define SKD_N_READ_CAP_BYTES (8u) |
| 112 | |
| 113 | #define SKD_N_INTERNAL_BYTES (512u) |
| 114 | |
| 115 | /* 5 bits of uniqifier, 0xF800 */ |
| 116 | #define SKD_ID_INCR (0x400) |
| 117 | #define SKD_ID_TABLE_MASK (3u << 8u) |
| 118 | #define SKD_ID_RW_REQUEST (0u << 8u) |
| 119 | #define SKD_ID_INTERNAL (1u << 8u) |
| 120 | #define SKD_ID_SPECIAL_REQUEST (2u << 8u) |
| 121 | #define SKD_ID_FIT_MSG (3u << 8u) |
| 122 | #define SKD_ID_SLOT_MASK 0x00FFu |
| 123 | #define SKD_ID_SLOT_AND_TABLE_MASK 0x03FFu |
| 124 | |
| 125 | #define SKD_N_TIMEOUT_SLOT 4u |
| 126 | #define SKD_TIMEOUT_SLOT_MASK 3u |
| 127 | |
| 128 | #define SKD_N_MAX_SECTORS 2048u |
| 129 | |
| 130 | #define SKD_MAX_RETRIES 2u |
| 131 | |
| 132 | #define SKD_TIMER_SECONDS(seconds) (seconds) |
| 133 | #define SKD_TIMER_MINUTES(minutes) ((minutes) * (60)) |
| 134 | |
| 135 | #define INQ_STD_NBYTES 36 |
| 136 | #define SKD_DISCARD_CDB_LENGTH 24 |
| 137 | |
| 138 | enum skd_drvr_state { |
| 139 | SKD_DRVR_STATE_LOAD, |
| 140 | SKD_DRVR_STATE_IDLE, |
| 141 | SKD_DRVR_STATE_BUSY, |
| 142 | SKD_DRVR_STATE_STARTING, |
| 143 | SKD_DRVR_STATE_ONLINE, |
| 144 | SKD_DRVR_STATE_PAUSING, |
| 145 | SKD_DRVR_STATE_PAUSED, |
| 146 | SKD_DRVR_STATE_DRAINING_TIMEOUT, |
| 147 | SKD_DRVR_STATE_RESTARTING, |
| 148 | SKD_DRVR_STATE_RESUMING, |
| 149 | SKD_DRVR_STATE_STOPPING, |
| 150 | SKD_DRVR_STATE_FAULT, |
| 151 | SKD_DRVR_STATE_DISAPPEARED, |
| 152 | SKD_DRVR_STATE_PROTOCOL_MISMATCH, |
| 153 | SKD_DRVR_STATE_BUSY_ERASE, |
| 154 | SKD_DRVR_STATE_BUSY_SANITIZE, |
| 155 | SKD_DRVR_STATE_BUSY_IMMINENT, |
| 156 | SKD_DRVR_STATE_WAIT_BOOT, |
| 157 | SKD_DRVR_STATE_SYNCING, |
| 158 | }; |
| 159 | |
| 160 | #define SKD_WAIT_BOOT_TIMO SKD_TIMER_SECONDS(90u) |
| 161 | #define SKD_STARTING_TIMO SKD_TIMER_SECONDS(8u) |
| 162 | #define SKD_RESTARTING_TIMO SKD_TIMER_MINUTES(4u) |
| 163 | #define SKD_DRAINING_TIMO SKD_TIMER_SECONDS(6u) |
| 164 | #define SKD_BUSY_TIMO SKD_TIMER_MINUTES(20u) |
| 165 | #define SKD_STARTED_BUSY_TIMO SKD_TIMER_SECONDS(60u) |
| 166 | #define SKD_START_WAIT_SECONDS 90u |
| 167 | |
| 168 | enum skd_req_state { |
| 169 | SKD_REQ_STATE_IDLE, |
| 170 | SKD_REQ_STATE_SETUP, |
| 171 | SKD_REQ_STATE_BUSY, |
| 172 | SKD_REQ_STATE_COMPLETED, |
| 173 | SKD_REQ_STATE_TIMEOUT, |
| 174 | SKD_REQ_STATE_ABORTED, |
| 175 | }; |
| 176 | |
| 177 | enum skd_fit_msg_state { |
| 178 | SKD_MSG_STATE_IDLE, |
| 179 | SKD_MSG_STATE_BUSY, |
| 180 | }; |
| 181 | |
| 182 | enum skd_check_status_action { |
| 183 | SKD_CHECK_STATUS_REPORT_GOOD, |
| 184 | SKD_CHECK_STATUS_REPORT_SMART_ALERT, |
| 185 | SKD_CHECK_STATUS_REQUEUE_REQUEST, |
| 186 | SKD_CHECK_STATUS_REPORT_ERROR, |
| 187 | SKD_CHECK_STATUS_BUSY_IMMINENT, |
| 188 | }; |
| 189 | |
| 190 | struct skd_fitmsg_context { |
| 191 | enum skd_fit_msg_state state; |
| 192 | |
| 193 | struct skd_fitmsg_context *next; |
| 194 | |
| 195 | u32 id; |
| 196 | u16 outstanding; |
| 197 | |
| 198 | u32 length; |
| 199 | u32 offset; |
| 200 | |
| 201 | u8 *msg_buf; |
| 202 | dma_addr_t mb_dma_address; |
| 203 | }; |
| 204 | |
| 205 | struct skd_request_context { |
| 206 | enum skd_req_state state; |
| 207 | |
| 208 | struct skd_request_context *next; |
| 209 | |
| 210 | u16 id; |
| 211 | u32 fitmsg_id; |
| 212 | |
| 213 | struct request *req; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 214 | u8 flush_cmd; |
| 215 | u8 discard_page; |
| 216 | |
| 217 | u32 timeout_stamp; |
| 218 | u8 sg_data_dir; |
| 219 | struct scatterlist *sg; |
| 220 | u32 n_sg; |
| 221 | u32 sg_byte_count; |
| 222 | |
| 223 | struct fit_sg_descriptor *sksg_list; |
| 224 | dma_addr_t sksg_dma_address; |
| 225 | |
| 226 | struct fit_completion_entry_v1 completion; |
| 227 | |
| 228 | struct fit_comp_error_info err_info; |
| 229 | |
| 230 | }; |
| 231 | #define SKD_DATA_DIR_HOST_TO_CARD 1 |
| 232 | #define SKD_DATA_DIR_CARD_TO_HOST 2 |
| 233 | #define SKD_DATA_DIR_NONE 3 /* especially for DISCARD requests. */ |
| 234 | |
| 235 | struct skd_special_context { |
| 236 | struct skd_request_context req; |
| 237 | |
| 238 | u8 orphaned; |
| 239 | |
| 240 | void *data_buf; |
| 241 | dma_addr_t db_dma_address; |
| 242 | |
| 243 | u8 *msg_buf; |
| 244 | dma_addr_t mb_dma_address; |
| 245 | }; |
| 246 | |
| 247 | struct skd_sg_io { |
| 248 | fmode_t mode; |
| 249 | void __user *argp; |
| 250 | |
| 251 | struct sg_io_hdr sg; |
| 252 | |
| 253 | u8 cdb[16]; |
| 254 | |
| 255 | u32 dxfer_len; |
| 256 | u32 iovcnt; |
| 257 | struct sg_iovec *iov; |
| 258 | struct sg_iovec no_iov_iov; |
| 259 | |
| 260 | struct skd_special_context *skspcl; |
| 261 | }; |
| 262 | |
| 263 | typedef enum skd_irq_type { |
| 264 | SKD_IRQ_LEGACY, |
| 265 | SKD_IRQ_MSI, |
| 266 | SKD_IRQ_MSIX |
| 267 | } skd_irq_type_t; |
| 268 | |
| 269 | #define SKD_MAX_BARS 2 |
| 270 | |
| 271 | struct skd_device { |
| 272 | volatile void __iomem *mem_map[SKD_MAX_BARS]; |
| 273 | resource_size_t mem_phys[SKD_MAX_BARS]; |
| 274 | u32 mem_size[SKD_MAX_BARS]; |
| 275 | |
| 276 | skd_irq_type_t irq_type; |
| 277 | u32 msix_count; |
| 278 | struct skd_msix_entry *msix_entries; |
| 279 | |
| 280 | struct pci_dev *pdev; |
| 281 | int pcie_error_reporting_is_enabled; |
| 282 | |
| 283 | spinlock_t lock; |
| 284 | struct gendisk *disk; |
| 285 | struct request_queue *queue; |
| 286 | struct device *class_dev; |
| 287 | int gendisk_on; |
| 288 | int sync_done; |
| 289 | |
| 290 | atomic_t device_count; |
| 291 | u32 devno; |
| 292 | u32 major; |
| 293 | char name[32]; |
| 294 | char isr_name[30]; |
| 295 | |
| 296 | enum skd_drvr_state state; |
| 297 | u32 drive_state; |
| 298 | |
| 299 | u32 in_flight; |
| 300 | u32 cur_max_queue_depth; |
| 301 | u32 queue_low_water_mark; |
| 302 | u32 dev_max_queue_depth; |
| 303 | |
| 304 | u32 num_fitmsg_context; |
| 305 | u32 num_req_context; |
| 306 | |
| 307 | u32 timeout_slot[SKD_N_TIMEOUT_SLOT]; |
| 308 | u32 timeout_stamp; |
| 309 | struct skd_fitmsg_context *skmsg_free_list; |
| 310 | struct skd_fitmsg_context *skmsg_table; |
| 311 | |
| 312 | struct skd_request_context *skreq_free_list; |
| 313 | struct skd_request_context *skreq_table; |
| 314 | |
| 315 | struct skd_special_context *skspcl_free_list; |
| 316 | struct skd_special_context *skspcl_table; |
| 317 | |
| 318 | struct skd_special_context internal_skspcl; |
| 319 | u32 read_cap_blocksize; |
| 320 | u32 read_cap_last_lba; |
| 321 | int read_cap_is_valid; |
| 322 | int inquiry_is_valid; |
| 323 | u8 inq_serial_num[13]; /*12 chars plus null term */ |
| 324 | u8 id_str[80]; /* holds a composite name (pci + sernum) */ |
| 325 | |
| 326 | u8 skcomp_cycle; |
| 327 | u32 skcomp_ix; |
| 328 | struct fit_completion_entry_v1 *skcomp_table; |
| 329 | struct fit_comp_error_info *skerr_table; |
| 330 | dma_addr_t cq_dma_address; |
| 331 | |
| 332 | wait_queue_head_t waitq; |
| 333 | |
| 334 | struct timer_list timer; |
| 335 | u32 timer_countdown; |
| 336 | u32 timer_substate; |
| 337 | |
| 338 | int n_special; |
| 339 | int sgs_per_request; |
| 340 | u32 last_mtd; |
| 341 | |
| 342 | u32 proto_ver; |
| 343 | |
| 344 | int dbg_level; |
| 345 | u32 connect_time_stamp; |
| 346 | int connect_retries; |
| 347 | #define SKD_MAX_CONNECT_RETRIES 16 |
| 348 | u32 drive_jiffies; |
| 349 | |
| 350 | u32 timo_slot; |
| 351 | |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 352 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 353 | struct work_struct completion_worker; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 354 | }; |
| 355 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 356 | #define SKD_WRITEL(DEV, VAL, OFF) skd_reg_write32(DEV, VAL, OFF) |
| 357 | #define SKD_READL(DEV, OFF) skd_reg_read32(DEV, OFF) |
| 358 | #define SKD_WRITEQ(DEV, VAL, OFF) skd_reg_write64(DEV, VAL, OFF) |
| 359 | |
| 360 | static inline u32 skd_reg_read32(struct skd_device *skdev, u32 offset) |
| 361 | { |
| 362 | u32 val; |
| 363 | |
| 364 | if (likely(skdev->dbg_level < 2)) |
| 365 | return readl(skdev->mem_map[1] + offset); |
| 366 | else { |
| 367 | barrier(); |
| 368 | val = readl(skdev->mem_map[1] + offset); |
| 369 | barrier(); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 370 | pr_debug("%s:%s:%d offset %x = %x\n", |
| 371 | skdev->name, __func__, __LINE__, offset, val); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 372 | return val; |
| 373 | } |
| 374 | |
| 375 | } |
| 376 | |
| 377 | static inline void skd_reg_write32(struct skd_device *skdev, u32 val, |
| 378 | u32 offset) |
| 379 | { |
| 380 | if (likely(skdev->dbg_level < 2)) { |
| 381 | writel(val, skdev->mem_map[1] + offset); |
| 382 | barrier(); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 383 | } else { |
| 384 | barrier(); |
| 385 | writel(val, skdev->mem_map[1] + offset); |
| 386 | barrier(); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 387 | pr_debug("%s:%s:%d offset %x = %x\n", |
| 388 | skdev->name, __func__, __LINE__, offset, val); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 389 | } |
| 390 | } |
| 391 | |
| 392 | static inline void skd_reg_write64(struct skd_device *skdev, u64 val, |
| 393 | u32 offset) |
| 394 | { |
| 395 | if (likely(skdev->dbg_level < 2)) { |
| 396 | writeq(val, skdev->mem_map[1] + offset); |
| 397 | barrier(); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 398 | } else { |
| 399 | barrier(); |
| 400 | writeq(val, skdev->mem_map[1] + offset); |
| 401 | barrier(); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 402 | pr_debug("%s:%s:%d offset %x = %016llx\n", |
| 403 | skdev->name, __func__, __LINE__, offset, val); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 404 | } |
| 405 | } |
| 406 | |
| 407 | |
| 408 | #define SKD_IRQ_DEFAULT SKD_IRQ_MSI |
| 409 | static int skd_isr_type = SKD_IRQ_DEFAULT; |
| 410 | |
| 411 | module_param(skd_isr_type, int, 0444); |
| 412 | MODULE_PARM_DESC(skd_isr_type, "Interrupt type capability." |
| 413 | " (0==legacy, 1==MSI, 2==MSI-X, default==1)"); |
| 414 | |
| 415 | #define SKD_MAX_REQ_PER_MSG_DEFAULT 1 |
| 416 | static int skd_max_req_per_msg = SKD_MAX_REQ_PER_MSG_DEFAULT; |
| 417 | |
| 418 | module_param(skd_max_req_per_msg, int, 0444); |
| 419 | MODULE_PARM_DESC(skd_max_req_per_msg, |
| 420 | "Maximum SCSI requests packed in a single message." |
| 421 | " (1-14, default==1)"); |
| 422 | |
| 423 | #define SKD_MAX_QUEUE_DEPTH_DEFAULT 64 |
| 424 | #define SKD_MAX_QUEUE_DEPTH_DEFAULT_STR "64" |
| 425 | static int skd_max_queue_depth = SKD_MAX_QUEUE_DEPTH_DEFAULT; |
| 426 | |
| 427 | module_param(skd_max_queue_depth, int, 0444); |
| 428 | MODULE_PARM_DESC(skd_max_queue_depth, |
| 429 | "Maximum SCSI requests issued to s1120." |
| 430 | " (1-200, default==" SKD_MAX_QUEUE_DEPTH_DEFAULT_STR ")"); |
| 431 | |
| 432 | static int skd_sgs_per_request = SKD_N_SG_PER_REQ_DEFAULT; |
| 433 | module_param(skd_sgs_per_request, int, 0444); |
| 434 | MODULE_PARM_DESC(skd_sgs_per_request, |
| 435 | "Maximum SG elements per block request." |
| 436 | " (1-4096, default==256)"); |
| 437 | |
| 438 | static int skd_max_pass_thru = SKD_N_SPECIAL_CONTEXT; |
| 439 | module_param(skd_max_pass_thru, int, 0444); |
| 440 | MODULE_PARM_DESC(skd_max_pass_thru, |
| 441 | "Maximum SCSI pass-thru at a time." " (1-50, default==32)"); |
| 442 | |
| 443 | module_param(skd_dbg_level, int, 0444); |
| 444 | MODULE_PARM_DESC(skd_dbg_level, "s1120 debug level (0,1,2)"); |
| 445 | |
| 446 | module_param(skd_isr_comp_limit, int, 0444); |
| 447 | MODULE_PARM_DESC(skd_isr_comp_limit, "s1120 isr comp limit (0=none) default=4"); |
| 448 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 449 | /* Major device number dynamically assigned. */ |
| 450 | static u32 skd_major; |
| 451 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 452 | static void skd_destruct(struct skd_device *skdev); |
| 453 | static const struct block_device_operations skd_blockdev_ops; |
| 454 | static void skd_send_fitmsg(struct skd_device *skdev, |
| 455 | struct skd_fitmsg_context *skmsg); |
| 456 | static void skd_send_special_fitmsg(struct skd_device *skdev, |
| 457 | struct skd_special_context *skspcl); |
| 458 | static void skd_request_fn(struct request_queue *rq); |
| 459 | static void skd_end_request(struct skd_device *skdev, |
| 460 | struct skd_request_context *skreq, int error); |
| 461 | static int skd_preop_sg_list(struct skd_device *skdev, |
| 462 | struct skd_request_context *skreq); |
| 463 | static void skd_postop_sg_list(struct skd_device *skdev, |
| 464 | struct skd_request_context *skreq); |
| 465 | |
| 466 | static void skd_restart_device(struct skd_device *skdev); |
| 467 | static int skd_quiesce_dev(struct skd_device *skdev); |
| 468 | static int skd_unquiesce_dev(struct skd_device *skdev); |
| 469 | static void skd_release_special(struct skd_device *skdev, |
| 470 | struct skd_special_context *skspcl); |
| 471 | static void skd_disable_interrupts(struct skd_device *skdev); |
| 472 | static void skd_isr_fwstate(struct skd_device *skdev); |
| 473 | static void skd_recover_requests(struct skd_device *skdev, int requeue); |
| 474 | static void skd_soft_reset(struct skd_device *skdev); |
| 475 | |
| 476 | static const char *skd_name(struct skd_device *skdev); |
| 477 | const char *skd_drive_state_to_str(int state); |
| 478 | const char *skd_skdev_state_to_str(enum skd_drvr_state state); |
| 479 | static void skd_log_skdev(struct skd_device *skdev, const char *event); |
| 480 | static void skd_log_skmsg(struct skd_device *skdev, |
| 481 | struct skd_fitmsg_context *skmsg, const char *event); |
| 482 | static void skd_log_skreq(struct skd_device *skdev, |
| 483 | struct skd_request_context *skreq, const char *event); |
| 484 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 485 | /* |
| 486 | ***************************************************************************** |
| 487 | * READ/WRITE REQUESTS |
| 488 | ***************************************************************************** |
| 489 | */ |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 490 | static void skd_fail_all_pending(struct skd_device *skdev) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 491 | { |
| 492 | struct request_queue *q = skdev->queue; |
| 493 | struct request *req; |
| 494 | |
| 495 | for (;; ) { |
| 496 | req = blk_peek_request(q); |
| 497 | if (req == NULL) |
| 498 | break; |
| 499 | blk_start_request(req); |
| 500 | __blk_end_request_all(req, -EIO); |
| 501 | } |
| 502 | } |
| 503 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 504 | static void |
| 505 | skd_prep_rw_cdb(struct skd_scsi_request *scsi_req, |
| 506 | int data_dir, unsigned lba, |
| 507 | unsigned count) |
| 508 | { |
| 509 | if (data_dir == READ) |
| 510 | scsi_req->cdb[0] = 0x28; |
| 511 | else |
| 512 | scsi_req->cdb[0] = 0x2a; |
| 513 | |
| 514 | scsi_req->cdb[1] = 0; |
| 515 | scsi_req->cdb[2] = (lba & 0xff000000) >> 24; |
| 516 | scsi_req->cdb[3] = (lba & 0xff0000) >> 16; |
| 517 | scsi_req->cdb[4] = (lba & 0xff00) >> 8; |
| 518 | scsi_req->cdb[5] = (lba & 0xff); |
| 519 | scsi_req->cdb[6] = 0; |
| 520 | scsi_req->cdb[7] = (count & 0xff00) >> 8; |
| 521 | scsi_req->cdb[8] = count & 0xff; |
| 522 | scsi_req->cdb[9] = 0; |
| 523 | } |
| 524 | |
| 525 | static void |
| 526 | skd_prep_zerosize_flush_cdb(struct skd_scsi_request *scsi_req, |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 527 | struct skd_request_context *skreq) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 528 | { |
| 529 | skreq->flush_cmd = 1; |
| 530 | |
| 531 | scsi_req->cdb[0] = 0x35; |
| 532 | scsi_req->cdb[1] = 0; |
| 533 | scsi_req->cdb[2] = 0; |
| 534 | scsi_req->cdb[3] = 0; |
| 535 | scsi_req->cdb[4] = 0; |
| 536 | scsi_req->cdb[5] = 0; |
| 537 | scsi_req->cdb[6] = 0; |
| 538 | scsi_req->cdb[7] = 0; |
| 539 | scsi_req->cdb[8] = 0; |
| 540 | scsi_req->cdb[9] = 0; |
| 541 | } |
| 542 | |
| 543 | static void |
| 544 | skd_prep_discard_cdb(struct skd_scsi_request *scsi_req, |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 545 | struct skd_request_context *skreq, |
| 546 | struct page *page, |
| 547 | u32 lba, u32 count) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 548 | { |
| 549 | char *buf; |
| 550 | unsigned long len; |
| 551 | struct request *req; |
| 552 | |
| 553 | buf = page_address(page); |
| 554 | len = SKD_DISCARD_CDB_LENGTH; |
| 555 | |
| 556 | scsi_req->cdb[0] = UNMAP; |
| 557 | scsi_req->cdb[8] = len; |
| 558 | |
| 559 | put_unaligned_be16(6 + 16, &buf[0]); |
| 560 | put_unaligned_be16(16, &buf[2]); |
| 561 | put_unaligned_be64(lba, &buf[8]); |
| 562 | put_unaligned_be32(count, &buf[16]); |
| 563 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 564 | req = skreq->req; |
| 565 | blk_add_request_payload(req, page, len); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 566 | } |
| 567 | |
| 568 | static void skd_request_fn_not_online(struct request_queue *q); |
| 569 | |
| 570 | static void skd_request_fn(struct request_queue *q) |
| 571 | { |
| 572 | struct skd_device *skdev = q->queuedata; |
| 573 | struct skd_fitmsg_context *skmsg = NULL; |
| 574 | struct fit_msg_hdr *fmh = NULL; |
| 575 | struct skd_request_context *skreq; |
| 576 | struct request *req = NULL; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 577 | struct skd_scsi_request *scsi_req; |
| 578 | struct page *page; |
| 579 | unsigned long io_flags; |
| 580 | int error; |
| 581 | u32 lba; |
| 582 | u32 count; |
| 583 | int data_dir; |
| 584 | u32 be_lba; |
| 585 | u32 be_count; |
| 586 | u64 be_dmaa; |
| 587 | u64 cmdctxt; |
| 588 | u32 timo_slot; |
| 589 | void *cmd_ptr; |
| 590 | int flush, fua; |
| 591 | |
| 592 | if (skdev->state != SKD_DRVR_STATE_ONLINE) { |
| 593 | skd_request_fn_not_online(q); |
| 594 | return; |
| 595 | } |
| 596 | |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 597 | if (blk_queue_stopped(skdev->queue)) { |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 598 | if (skdev->skmsg_free_list == NULL || |
| 599 | skdev->skreq_free_list == NULL || |
| 600 | skdev->in_flight >= skdev->queue_low_water_mark) |
| 601 | /* There is still some kind of shortage */ |
| 602 | return; |
| 603 | |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 604 | queue_flag_clear(QUEUE_FLAG_STOPPED, skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 605 | } |
| 606 | |
| 607 | /* |
| 608 | * Stop conditions: |
| 609 | * - There are no more native requests |
| 610 | * - There are already the maximum number of requests in progress |
| 611 | * - There are no more skd_request_context entries |
| 612 | * - There are no more FIT msg buffers |
| 613 | */ |
| 614 | for (;; ) { |
| 615 | |
| 616 | flush = fua = 0; |
| 617 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 618 | req = blk_peek_request(q); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 619 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 620 | /* Are there any native requests to start? */ |
| 621 | if (req == NULL) |
| 622 | break; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 623 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 624 | lba = (u32)blk_rq_pos(req); |
| 625 | count = blk_rq_sectors(req); |
| 626 | data_dir = rq_data_dir(req); |
| 627 | io_flags = req->cmd_flags; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 628 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 629 | if (io_flags & REQ_FLUSH) |
| 630 | flush++; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 631 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 632 | if (io_flags & REQ_FUA) |
| 633 | fua++; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 634 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 635 | pr_debug("%s:%s:%d new req=%p lba=%u(0x%x) " |
| 636 | "count=%u(0x%x) dir=%d\n", |
| 637 | skdev->name, __func__, __LINE__, |
| 638 | req, lba, lba, count, count, data_dir); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 639 | |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 640 | /* At this point we know there is a request */ |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 641 | |
| 642 | /* Are too many requets already in progress? */ |
| 643 | if (skdev->in_flight >= skdev->cur_max_queue_depth) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 644 | pr_debug("%s:%s:%d qdepth %d, limit %d\n", |
| 645 | skdev->name, __func__, __LINE__, |
| 646 | skdev->in_flight, skdev->cur_max_queue_depth); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 647 | break; |
| 648 | } |
| 649 | |
| 650 | /* Is a skd_request_context available? */ |
| 651 | skreq = skdev->skreq_free_list; |
| 652 | if (skreq == NULL) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 653 | pr_debug("%s:%s:%d Out of req=%p\n", |
| 654 | skdev->name, __func__, __LINE__, q); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 655 | break; |
| 656 | } |
| 657 | SKD_ASSERT(skreq->state == SKD_REQ_STATE_IDLE); |
| 658 | SKD_ASSERT((skreq->id & SKD_ID_INCR) == 0); |
| 659 | |
| 660 | /* Now we check to see if we can get a fit msg */ |
| 661 | if (skmsg == NULL) { |
| 662 | if (skdev->skmsg_free_list == NULL) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 663 | pr_debug("%s:%s:%d Out of msg\n", |
| 664 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 665 | break; |
| 666 | } |
| 667 | } |
| 668 | |
| 669 | skreq->flush_cmd = 0; |
| 670 | skreq->n_sg = 0; |
| 671 | skreq->sg_byte_count = 0; |
| 672 | skreq->discard_page = 0; |
| 673 | |
| 674 | /* |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 675 | * OK to now dequeue request from q. |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 676 | * |
| 677 | * At this point we are comitted to either start or reject |
| 678 | * the native request. Note that skd_request_context is |
| 679 | * available but is still at the head of the free list. |
| 680 | */ |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 681 | blk_start_request(req); |
| 682 | skreq->req = req; |
| 683 | skreq->fitmsg_id = 0; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 684 | |
| 685 | /* Either a FIT msg is in progress or we have to start one. */ |
| 686 | if (skmsg == NULL) { |
| 687 | /* Are there any FIT msg buffers available? */ |
| 688 | skmsg = skdev->skmsg_free_list; |
| 689 | if (skmsg == NULL) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 690 | pr_debug("%s:%s:%d Out of msg skdev=%p\n", |
| 691 | skdev->name, __func__, __LINE__, |
| 692 | skdev); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 693 | break; |
| 694 | } |
| 695 | SKD_ASSERT(skmsg->state == SKD_MSG_STATE_IDLE); |
| 696 | SKD_ASSERT((skmsg->id & SKD_ID_INCR) == 0); |
| 697 | |
| 698 | skdev->skmsg_free_list = skmsg->next; |
| 699 | |
| 700 | skmsg->state = SKD_MSG_STATE_BUSY; |
| 701 | skmsg->id += SKD_ID_INCR; |
| 702 | |
| 703 | /* Initialize the FIT msg header */ |
| 704 | fmh = (struct fit_msg_hdr *)skmsg->msg_buf; |
| 705 | memset(fmh, 0, sizeof(*fmh)); |
| 706 | fmh->protocol_id = FIT_PROTOCOL_ID_SOFIT; |
| 707 | skmsg->length = sizeof(*fmh); |
| 708 | } |
| 709 | |
| 710 | skreq->fitmsg_id = skmsg->id; |
| 711 | |
| 712 | /* |
| 713 | * Note that a FIT msg may have just been started |
| 714 | * but contains no SoFIT requests yet. |
| 715 | */ |
| 716 | |
| 717 | /* |
| 718 | * Transcode the request, checking as we go. The outcome of |
| 719 | * the transcoding is represented by the error variable. |
| 720 | */ |
| 721 | cmd_ptr = &skmsg->msg_buf[skmsg->length]; |
| 722 | memset(cmd_ptr, 0, 32); |
| 723 | |
| 724 | be_lba = cpu_to_be32(lba); |
| 725 | be_count = cpu_to_be32(count); |
| 726 | be_dmaa = cpu_to_be64((u64)skreq->sksg_dma_address); |
| 727 | cmdctxt = skreq->id + SKD_ID_INCR; |
| 728 | |
| 729 | scsi_req = cmd_ptr; |
| 730 | scsi_req->hdr.tag = cmdctxt; |
| 731 | scsi_req->hdr.sg_list_dma_address = be_dmaa; |
| 732 | |
| 733 | if (data_dir == READ) |
| 734 | skreq->sg_data_dir = SKD_DATA_DIR_CARD_TO_HOST; |
| 735 | else |
| 736 | skreq->sg_data_dir = SKD_DATA_DIR_HOST_TO_CARD; |
| 737 | |
| 738 | if (io_flags & REQ_DISCARD) { |
| 739 | page = alloc_page(GFP_ATOMIC | __GFP_ZERO); |
| 740 | if (!page) { |
| 741 | pr_err("request_fn:Page allocation failed.\n"); |
| 742 | skd_end_request(skdev, skreq, -ENOMEM); |
| 743 | break; |
| 744 | } |
| 745 | skreq->discard_page = 1; |
Jens Axboe | dc4a930 | 2014-04-16 21:37:30 -0600 | [diff] [blame] | 746 | req->completion_data = page; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 747 | skd_prep_discard_cdb(scsi_req, skreq, page, lba, count); |
| 748 | |
| 749 | } else if (flush == SKD_FLUSH_ZERO_SIZE_FIRST) { |
| 750 | skd_prep_zerosize_flush_cdb(scsi_req, skreq); |
| 751 | SKD_ASSERT(skreq->flush_cmd == 1); |
| 752 | |
| 753 | } else { |
| 754 | skd_prep_rw_cdb(scsi_req, data_dir, lba, count); |
| 755 | } |
| 756 | |
| 757 | if (fua) |
| 758 | scsi_req->cdb[1] |= SKD_FUA_NV; |
| 759 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 760 | if (!req->bio) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 761 | goto skip_sg; |
| 762 | |
| 763 | error = skd_preop_sg_list(skdev, skreq); |
| 764 | |
| 765 | if (error != 0) { |
| 766 | /* |
| 767 | * Complete the native request with error. |
| 768 | * Note that the request context is still at the |
| 769 | * head of the free list, and that the SoFIT request |
| 770 | * was encoded into the FIT msg buffer but the FIT |
| 771 | * msg length has not been updated. In short, the |
| 772 | * only resource that has been allocated but might |
| 773 | * not be used is that the FIT msg could be empty. |
| 774 | */ |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 775 | pr_debug("%s:%s:%d error Out\n", |
| 776 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 777 | skd_end_request(skdev, skreq, error); |
| 778 | continue; |
| 779 | } |
| 780 | |
| 781 | skip_sg: |
| 782 | scsi_req->hdr.sg_list_len_bytes = |
| 783 | cpu_to_be32(skreq->sg_byte_count); |
| 784 | |
| 785 | /* Complete resource allocations. */ |
| 786 | skdev->skreq_free_list = skreq->next; |
| 787 | skreq->state = SKD_REQ_STATE_BUSY; |
| 788 | skreq->id += SKD_ID_INCR; |
| 789 | |
| 790 | skmsg->length += sizeof(struct skd_scsi_request); |
| 791 | fmh->num_protocol_cmds_coalesced++; |
| 792 | |
| 793 | /* |
| 794 | * Update the active request counts. |
| 795 | * Capture the timeout timestamp. |
| 796 | */ |
| 797 | skreq->timeout_stamp = skdev->timeout_stamp; |
| 798 | timo_slot = skreq->timeout_stamp & SKD_TIMEOUT_SLOT_MASK; |
| 799 | skdev->timeout_slot[timo_slot]++; |
| 800 | skdev->in_flight++; |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 801 | pr_debug("%s:%s:%d req=0x%x busy=%d\n", |
| 802 | skdev->name, __func__, __LINE__, |
| 803 | skreq->id, skdev->in_flight); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 804 | |
| 805 | /* |
| 806 | * If the FIT msg buffer is full send it. |
| 807 | */ |
| 808 | if (skmsg->length >= SKD_N_FITMSG_BYTES || |
| 809 | fmh->num_protocol_cmds_coalesced >= skd_max_req_per_msg) { |
| 810 | skd_send_fitmsg(skdev, skmsg); |
| 811 | skmsg = NULL; |
| 812 | fmh = NULL; |
| 813 | } |
| 814 | } |
| 815 | |
| 816 | /* |
| 817 | * Is a FIT msg in progress? If it is empty put the buffer back |
| 818 | * on the free list. If it is non-empty send what we got. |
| 819 | * This minimizes latency when there are fewer requests than |
| 820 | * what fits in a FIT msg. |
| 821 | */ |
| 822 | if (skmsg != NULL) { |
| 823 | /* Bigger than just a FIT msg header? */ |
| 824 | if (skmsg->length > sizeof(struct fit_msg_hdr)) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 825 | pr_debug("%s:%s:%d sending msg=%p, len %d\n", |
| 826 | skdev->name, __func__, __LINE__, |
| 827 | skmsg, skmsg->length); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 828 | skd_send_fitmsg(skdev, skmsg); |
| 829 | } else { |
| 830 | /* |
| 831 | * The FIT msg is empty. It means we got started |
| 832 | * on the msg, but the requests were rejected. |
| 833 | */ |
| 834 | skmsg->state = SKD_MSG_STATE_IDLE; |
| 835 | skmsg->id += SKD_ID_INCR; |
| 836 | skmsg->next = skdev->skmsg_free_list; |
| 837 | skdev->skmsg_free_list = skmsg; |
| 838 | } |
| 839 | skmsg = NULL; |
| 840 | fmh = NULL; |
| 841 | } |
| 842 | |
| 843 | /* |
| 844 | * If req is non-NULL it means there is something to do but |
| 845 | * we are out of a resource. |
| 846 | */ |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 847 | if (req) |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 848 | blk_stop_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 849 | } |
| 850 | |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 851 | static void skd_end_request(struct skd_device *skdev, |
| 852 | struct skd_request_context *skreq, int error) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 853 | { |
| 854 | struct request *req = skreq->req; |
| 855 | unsigned int io_flags = req->cmd_flags; |
| 856 | |
| 857 | if ((io_flags & REQ_DISCARD) && |
| 858 | (skreq->discard_page == 1)) { |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 859 | pr_debug("%s:%s:%d, free the page!", |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 860 | skdev->name, __func__, __LINE__); |
Jens Axboe | dc4a930 | 2014-04-16 21:37:30 -0600 | [diff] [blame] | 861 | __free_page(req->completion_data); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 862 | } |
| 863 | |
| 864 | if (unlikely(error)) { |
| 865 | struct request *req = skreq->req; |
| 866 | char *cmd = (rq_data_dir(req) == READ) ? "read" : "write"; |
| 867 | u32 lba = (u32)blk_rq_pos(req); |
| 868 | u32 count = blk_rq_sectors(req); |
| 869 | |
| 870 | pr_err("(%s): Error cmd=%s sect=%u count=%u id=0x%x\n", |
| 871 | skd_name(skdev), cmd, lba, count, skreq->id); |
| 872 | } else |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 873 | pr_debug("%s:%s:%d id=0x%x error=%d\n", |
| 874 | skdev->name, __func__, __LINE__, skreq->id, error); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 875 | |
| 876 | __blk_end_request_all(skreq->req, error); |
| 877 | } |
| 878 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 879 | static int skd_preop_sg_list(struct skd_device *skdev, |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 880 | struct skd_request_context *skreq) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 881 | { |
| 882 | struct request *req = skreq->req; |
| 883 | int writing = skreq->sg_data_dir == SKD_DATA_DIR_HOST_TO_CARD; |
| 884 | int pci_dir = writing ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE; |
| 885 | struct scatterlist *sg = &skreq->sg[0]; |
| 886 | int n_sg; |
| 887 | int i; |
| 888 | |
| 889 | skreq->sg_byte_count = 0; |
| 890 | |
| 891 | /* SKD_ASSERT(skreq->sg_data_dir == SKD_DATA_DIR_HOST_TO_CARD || |
| 892 | skreq->sg_data_dir == SKD_DATA_DIR_CARD_TO_HOST); */ |
| 893 | |
| 894 | n_sg = blk_rq_map_sg(skdev->queue, req, sg); |
| 895 | if (n_sg <= 0) |
| 896 | return -EINVAL; |
| 897 | |
| 898 | /* |
| 899 | * Map scatterlist to PCI bus addresses. |
| 900 | * Note PCI might change the number of entries. |
| 901 | */ |
| 902 | n_sg = pci_map_sg(skdev->pdev, sg, n_sg, pci_dir); |
| 903 | if (n_sg <= 0) |
| 904 | return -EINVAL; |
| 905 | |
| 906 | SKD_ASSERT(n_sg <= skdev->sgs_per_request); |
| 907 | |
| 908 | skreq->n_sg = n_sg; |
| 909 | |
| 910 | for (i = 0; i < n_sg; i++) { |
| 911 | struct fit_sg_descriptor *sgd = &skreq->sksg_list[i]; |
| 912 | u32 cnt = sg_dma_len(&sg[i]); |
| 913 | uint64_t dma_addr = sg_dma_address(&sg[i]); |
| 914 | |
| 915 | sgd->control = FIT_SGD_CONTROL_NOT_LAST; |
| 916 | sgd->byte_count = cnt; |
| 917 | skreq->sg_byte_count += cnt; |
| 918 | sgd->host_side_addr = dma_addr; |
| 919 | sgd->dev_side_addr = 0; |
| 920 | } |
| 921 | |
| 922 | skreq->sksg_list[n_sg - 1].next_desc_ptr = 0LL; |
| 923 | skreq->sksg_list[n_sg - 1].control = FIT_SGD_CONTROL_LAST; |
| 924 | |
| 925 | if (unlikely(skdev->dbg_level > 1)) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 926 | pr_debug("%s:%s:%d skreq=%x sksg_list=%p sksg_dma=%llx\n", |
| 927 | skdev->name, __func__, __LINE__, |
| 928 | skreq->id, skreq->sksg_list, skreq->sksg_dma_address); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 929 | for (i = 0; i < n_sg; i++) { |
| 930 | struct fit_sg_descriptor *sgd = &skreq->sksg_list[i]; |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 931 | pr_debug("%s:%s:%d sg[%d] count=%u ctrl=0x%x " |
| 932 | "addr=0x%llx next=0x%llx\n", |
| 933 | skdev->name, __func__, __LINE__, |
| 934 | i, sgd->byte_count, sgd->control, |
| 935 | sgd->host_side_addr, sgd->next_desc_ptr); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 936 | } |
| 937 | } |
| 938 | |
| 939 | return 0; |
| 940 | } |
| 941 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 942 | static void skd_postop_sg_list(struct skd_device *skdev, |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 943 | struct skd_request_context *skreq) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 944 | { |
| 945 | int writing = skreq->sg_data_dir == SKD_DATA_DIR_HOST_TO_CARD; |
| 946 | int pci_dir = writing ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE; |
| 947 | |
| 948 | /* |
| 949 | * restore the next ptr for next IO request so we |
| 950 | * don't have to set it every time. |
| 951 | */ |
| 952 | skreq->sksg_list[skreq->n_sg - 1].next_desc_ptr = |
| 953 | skreq->sksg_dma_address + |
| 954 | ((skreq->n_sg) * sizeof(struct fit_sg_descriptor)); |
| 955 | pci_unmap_sg(skdev->pdev, &skreq->sg[0], skreq->n_sg, pci_dir); |
| 956 | } |
| 957 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 958 | static void skd_request_fn_not_online(struct request_queue *q) |
| 959 | { |
| 960 | struct skd_device *skdev = q->queuedata; |
| 961 | int error; |
| 962 | |
| 963 | SKD_ASSERT(skdev->state != SKD_DRVR_STATE_ONLINE); |
| 964 | |
| 965 | skd_log_skdev(skdev, "req_not_online"); |
| 966 | switch (skdev->state) { |
| 967 | case SKD_DRVR_STATE_PAUSING: |
| 968 | case SKD_DRVR_STATE_PAUSED: |
| 969 | case SKD_DRVR_STATE_STARTING: |
| 970 | case SKD_DRVR_STATE_RESTARTING: |
| 971 | case SKD_DRVR_STATE_WAIT_BOOT: |
| 972 | /* In case of starting, we haven't started the queue, |
| 973 | * so we can't get here... but requests are |
| 974 | * possibly hanging out waiting for us because we |
| 975 | * reported the dev/skd0 already. They'll wait |
| 976 | * forever if connect doesn't complete. |
| 977 | * What to do??? delay dev/skd0 ?? |
| 978 | */ |
| 979 | case SKD_DRVR_STATE_BUSY: |
| 980 | case SKD_DRVR_STATE_BUSY_IMMINENT: |
| 981 | case SKD_DRVR_STATE_BUSY_ERASE: |
| 982 | case SKD_DRVR_STATE_DRAINING_TIMEOUT: |
| 983 | return; |
| 984 | |
| 985 | case SKD_DRVR_STATE_BUSY_SANITIZE: |
| 986 | case SKD_DRVR_STATE_STOPPING: |
| 987 | case SKD_DRVR_STATE_SYNCING: |
| 988 | case SKD_DRVR_STATE_FAULT: |
| 989 | case SKD_DRVR_STATE_DISAPPEARED: |
| 990 | default: |
| 991 | error = -EIO; |
| 992 | break; |
| 993 | } |
| 994 | |
| 995 | /* If we get here, terminate all pending block requeusts |
| 996 | * with EIO and any scsi pass thru with appropriate sense |
| 997 | */ |
| 998 | |
| 999 | skd_fail_all_pending(skdev); |
| 1000 | } |
| 1001 | |
| 1002 | /* |
| 1003 | ***************************************************************************** |
| 1004 | * TIMER |
| 1005 | ***************************************************************************** |
| 1006 | */ |
| 1007 | |
| 1008 | static void skd_timer_tick_not_online(struct skd_device *skdev); |
| 1009 | |
| 1010 | static void skd_timer_tick(ulong arg) |
| 1011 | { |
| 1012 | struct skd_device *skdev = (struct skd_device *)arg; |
| 1013 | |
| 1014 | u32 timo_slot; |
| 1015 | u32 overdue_timestamp; |
| 1016 | unsigned long reqflags; |
| 1017 | u32 state; |
| 1018 | |
| 1019 | if (skdev->state == SKD_DRVR_STATE_FAULT) |
| 1020 | /* The driver has declared fault, and we want it to |
| 1021 | * stay that way until driver is reloaded. |
| 1022 | */ |
| 1023 | return; |
| 1024 | |
| 1025 | spin_lock_irqsave(&skdev->lock, reqflags); |
| 1026 | |
| 1027 | state = SKD_READL(skdev, FIT_STATUS); |
| 1028 | state &= FIT_SR_DRIVE_STATE_MASK; |
| 1029 | if (state != skdev->drive_state) |
| 1030 | skd_isr_fwstate(skdev); |
| 1031 | |
| 1032 | if (skdev->state != SKD_DRVR_STATE_ONLINE) { |
| 1033 | skd_timer_tick_not_online(skdev); |
| 1034 | goto timer_func_out; |
| 1035 | } |
| 1036 | skdev->timeout_stamp++; |
| 1037 | timo_slot = skdev->timeout_stamp & SKD_TIMEOUT_SLOT_MASK; |
| 1038 | |
| 1039 | /* |
| 1040 | * All requests that happened during the previous use of |
| 1041 | * this slot should be done by now. The previous use was |
| 1042 | * over 7 seconds ago. |
| 1043 | */ |
| 1044 | if (skdev->timeout_slot[timo_slot] == 0) |
| 1045 | goto timer_func_out; |
| 1046 | |
| 1047 | /* Something is overdue */ |
| 1048 | overdue_timestamp = skdev->timeout_stamp - SKD_N_TIMEOUT_SLOT; |
| 1049 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1050 | pr_debug("%s:%s:%d found %d timeouts, draining busy=%d\n", |
| 1051 | skdev->name, __func__, __LINE__, |
| 1052 | skdev->timeout_slot[timo_slot], skdev->in_flight); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1053 | pr_err("(%s): Overdue IOs (%d), busy %d\n", |
| 1054 | skd_name(skdev), skdev->timeout_slot[timo_slot], |
| 1055 | skdev->in_flight); |
| 1056 | |
| 1057 | skdev->timer_countdown = SKD_DRAINING_TIMO; |
| 1058 | skdev->state = SKD_DRVR_STATE_DRAINING_TIMEOUT; |
| 1059 | skdev->timo_slot = timo_slot; |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 1060 | blk_stop_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1061 | |
| 1062 | timer_func_out: |
| 1063 | mod_timer(&skdev->timer, (jiffies + HZ)); |
| 1064 | |
| 1065 | spin_unlock_irqrestore(&skdev->lock, reqflags); |
| 1066 | } |
| 1067 | |
| 1068 | static void skd_timer_tick_not_online(struct skd_device *skdev) |
| 1069 | { |
| 1070 | switch (skdev->state) { |
| 1071 | case SKD_DRVR_STATE_IDLE: |
| 1072 | case SKD_DRVR_STATE_LOAD: |
| 1073 | break; |
| 1074 | case SKD_DRVR_STATE_BUSY_SANITIZE: |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1075 | pr_debug("%s:%s:%d drive busy sanitize[%x], driver[%x]\n", |
| 1076 | skdev->name, __func__, __LINE__, |
| 1077 | skdev->drive_state, skdev->state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1078 | /* If we've been in sanitize for 3 seconds, we figure we're not |
| 1079 | * going to get anymore completions, so recover requests now |
| 1080 | */ |
| 1081 | if (skdev->timer_countdown > 0) { |
| 1082 | skdev->timer_countdown--; |
| 1083 | return; |
| 1084 | } |
| 1085 | skd_recover_requests(skdev, 0); |
| 1086 | break; |
| 1087 | |
| 1088 | case SKD_DRVR_STATE_BUSY: |
| 1089 | case SKD_DRVR_STATE_BUSY_IMMINENT: |
| 1090 | case SKD_DRVR_STATE_BUSY_ERASE: |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1091 | pr_debug("%s:%s:%d busy[%x], countdown=%d\n", |
| 1092 | skdev->name, __func__, __LINE__, |
| 1093 | skdev->state, skdev->timer_countdown); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1094 | if (skdev->timer_countdown > 0) { |
| 1095 | skdev->timer_countdown--; |
| 1096 | return; |
| 1097 | } |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1098 | pr_debug("%s:%s:%d busy[%x], timedout=%d, restarting device.", |
| 1099 | skdev->name, __func__, __LINE__, |
| 1100 | skdev->state, skdev->timer_countdown); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1101 | skd_restart_device(skdev); |
| 1102 | break; |
| 1103 | |
| 1104 | case SKD_DRVR_STATE_WAIT_BOOT: |
| 1105 | case SKD_DRVR_STATE_STARTING: |
| 1106 | if (skdev->timer_countdown > 0) { |
| 1107 | skdev->timer_countdown--; |
| 1108 | return; |
| 1109 | } |
| 1110 | /* For now, we fault the drive. Could attempt resets to |
| 1111 | * revcover at some point. */ |
| 1112 | skdev->state = SKD_DRVR_STATE_FAULT; |
| 1113 | |
| 1114 | pr_err("(%s): DriveFault Connect Timeout (%x)\n", |
| 1115 | skd_name(skdev), skdev->drive_state); |
| 1116 | |
| 1117 | /*start the queue so we can respond with error to requests */ |
| 1118 | /* wakeup anyone waiting for startup complete */ |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 1119 | blk_start_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1120 | skdev->gendisk_on = -1; |
| 1121 | wake_up_interruptible(&skdev->waitq); |
| 1122 | break; |
| 1123 | |
| 1124 | case SKD_DRVR_STATE_ONLINE: |
| 1125 | /* shouldn't get here. */ |
| 1126 | break; |
| 1127 | |
| 1128 | case SKD_DRVR_STATE_PAUSING: |
| 1129 | case SKD_DRVR_STATE_PAUSED: |
| 1130 | break; |
| 1131 | |
| 1132 | case SKD_DRVR_STATE_DRAINING_TIMEOUT: |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1133 | pr_debug("%s:%s:%d " |
| 1134 | "draining busy [%d] tick[%d] qdb[%d] tmls[%d]\n", |
| 1135 | skdev->name, __func__, __LINE__, |
| 1136 | skdev->timo_slot, |
| 1137 | skdev->timer_countdown, |
| 1138 | skdev->in_flight, |
| 1139 | skdev->timeout_slot[skdev->timo_slot]); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1140 | /* if the slot has cleared we can let the I/O continue */ |
| 1141 | if (skdev->timeout_slot[skdev->timo_slot] == 0) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1142 | pr_debug("%s:%s:%d Slot drained, starting queue.\n", |
| 1143 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1144 | skdev->state = SKD_DRVR_STATE_ONLINE; |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 1145 | blk_start_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1146 | return; |
| 1147 | } |
| 1148 | if (skdev->timer_countdown > 0) { |
| 1149 | skdev->timer_countdown--; |
| 1150 | return; |
| 1151 | } |
| 1152 | skd_restart_device(skdev); |
| 1153 | break; |
| 1154 | |
| 1155 | case SKD_DRVR_STATE_RESTARTING: |
| 1156 | if (skdev->timer_countdown > 0) { |
| 1157 | skdev->timer_countdown--; |
| 1158 | return; |
| 1159 | } |
| 1160 | /* For now, we fault the drive. Could attempt resets to |
| 1161 | * revcover at some point. */ |
| 1162 | skdev->state = SKD_DRVR_STATE_FAULT; |
| 1163 | pr_err("(%s): DriveFault Reconnect Timeout (%x)\n", |
| 1164 | skd_name(skdev), skdev->drive_state); |
| 1165 | |
| 1166 | /* |
| 1167 | * Recovering does two things: |
| 1168 | * 1. completes IO with error |
| 1169 | * 2. reclaims dma resources |
| 1170 | * When is it safe to recover requests? |
| 1171 | * - if the drive state is faulted |
| 1172 | * - if the state is still soft reset after out timeout |
| 1173 | * - if the drive registers are dead (state = FF) |
| 1174 | * If it is "unsafe", we still need to recover, so we will |
| 1175 | * disable pci bus mastering and disable our interrupts. |
| 1176 | */ |
| 1177 | |
| 1178 | if ((skdev->drive_state == FIT_SR_DRIVE_SOFT_RESET) || |
| 1179 | (skdev->drive_state == FIT_SR_DRIVE_FAULT) || |
| 1180 | (skdev->drive_state == FIT_SR_DRIVE_STATE_MASK)) |
| 1181 | /* It never came out of soft reset. Try to |
| 1182 | * recover the requests and then let them |
| 1183 | * fail. This is to mitigate hung processes. */ |
| 1184 | skd_recover_requests(skdev, 0); |
| 1185 | else { |
| 1186 | pr_err("(%s): Disable BusMaster (%x)\n", |
| 1187 | skd_name(skdev), skdev->drive_state); |
| 1188 | pci_disable_device(skdev->pdev); |
| 1189 | skd_disable_interrupts(skdev); |
| 1190 | skd_recover_requests(skdev, 0); |
| 1191 | } |
| 1192 | |
| 1193 | /*start the queue so we can respond with error to requests */ |
| 1194 | /* wakeup anyone waiting for startup complete */ |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 1195 | blk_start_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1196 | skdev->gendisk_on = -1; |
| 1197 | wake_up_interruptible(&skdev->waitq); |
| 1198 | break; |
| 1199 | |
| 1200 | case SKD_DRVR_STATE_RESUMING: |
| 1201 | case SKD_DRVR_STATE_STOPPING: |
| 1202 | case SKD_DRVR_STATE_SYNCING: |
| 1203 | case SKD_DRVR_STATE_FAULT: |
| 1204 | case SKD_DRVR_STATE_DISAPPEARED: |
| 1205 | default: |
| 1206 | break; |
| 1207 | } |
| 1208 | } |
| 1209 | |
| 1210 | static int skd_start_timer(struct skd_device *skdev) |
| 1211 | { |
| 1212 | int rc; |
| 1213 | |
| 1214 | init_timer(&skdev->timer); |
| 1215 | setup_timer(&skdev->timer, skd_timer_tick, (ulong)skdev); |
| 1216 | |
| 1217 | rc = mod_timer(&skdev->timer, (jiffies + HZ)); |
| 1218 | if (rc) |
| 1219 | pr_err("%s: failed to start timer %d\n", |
| 1220 | __func__, rc); |
| 1221 | return rc; |
| 1222 | } |
| 1223 | |
| 1224 | static void skd_kill_timer(struct skd_device *skdev) |
| 1225 | { |
| 1226 | del_timer_sync(&skdev->timer); |
| 1227 | } |
| 1228 | |
| 1229 | /* |
| 1230 | ***************************************************************************** |
| 1231 | * IOCTL |
| 1232 | ***************************************************************************** |
| 1233 | */ |
| 1234 | static int skd_ioctl_sg_io(struct skd_device *skdev, |
| 1235 | fmode_t mode, void __user *argp); |
| 1236 | static int skd_sg_io_get_and_check_args(struct skd_device *skdev, |
| 1237 | struct skd_sg_io *sksgio); |
| 1238 | static int skd_sg_io_obtain_skspcl(struct skd_device *skdev, |
| 1239 | struct skd_sg_io *sksgio); |
| 1240 | static int skd_sg_io_prep_buffering(struct skd_device *skdev, |
| 1241 | struct skd_sg_io *sksgio); |
| 1242 | static int skd_sg_io_copy_buffer(struct skd_device *skdev, |
| 1243 | struct skd_sg_io *sksgio, int dxfer_dir); |
| 1244 | static int skd_sg_io_send_fitmsg(struct skd_device *skdev, |
| 1245 | struct skd_sg_io *sksgio); |
| 1246 | static int skd_sg_io_await(struct skd_device *skdev, struct skd_sg_io *sksgio); |
| 1247 | static int skd_sg_io_release_skspcl(struct skd_device *skdev, |
| 1248 | struct skd_sg_io *sksgio); |
| 1249 | static int skd_sg_io_put_status(struct skd_device *skdev, |
| 1250 | struct skd_sg_io *sksgio); |
| 1251 | |
| 1252 | static void skd_complete_special(struct skd_device *skdev, |
| 1253 | volatile struct fit_completion_entry_v1 |
| 1254 | *skcomp, |
| 1255 | volatile struct fit_comp_error_info *skerr, |
| 1256 | struct skd_special_context *skspcl); |
| 1257 | |
| 1258 | static int skd_bdev_ioctl(struct block_device *bdev, fmode_t mode, |
| 1259 | uint cmd_in, ulong arg) |
| 1260 | { |
| 1261 | int rc = 0; |
| 1262 | struct gendisk *disk = bdev->bd_disk; |
| 1263 | struct skd_device *skdev = disk->private_data; |
| 1264 | void __user *p = (void *)arg; |
| 1265 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1266 | pr_debug("%s:%s:%d %s: CMD[%s] ioctl mode 0x%x, cmd 0x%x arg %0lx\n", |
| 1267 | skdev->name, __func__, __LINE__, |
| 1268 | disk->disk_name, current->comm, mode, cmd_in, arg); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1269 | |
| 1270 | if (!capable(CAP_SYS_ADMIN)) |
| 1271 | return -EPERM; |
| 1272 | |
| 1273 | switch (cmd_in) { |
| 1274 | case SG_SET_TIMEOUT: |
| 1275 | case SG_GET_TIMEOUT: |
| 1276 | case SG_GET_VERSION_NUM: |
| 1277 | rc = scsi_cmd_ioctl(disk->queue, disk, mode, cmd_in, p); |
| 1278 | break; |
| 1279 | case SG_IO: |
| 1280 | rc = skd_ioctl_sg_io(skdev, mode, p); |
| 1281 | break; |
| 1282 | |
| 1283 | default: |
| 1284 | rc = -ENOTTY; |
| 1285 | break; |
| 1286 | } |
| 1287 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1288 | pr_debug("%s:%s:%d %s: completion rc %d\n", |
| 1289 | skdev->name, __func__, __LINE__, disk->disk_name, rc); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1290 | return rc; |
| 1291 | } |
| 1292 | |
| 1293 | static int skd_ioctl_sg_io(struct skd_device *skdev, fmode_t mode, |
| 1294 | void __user *argp) |
| 1295 | { |
| 1296 | int rc; |
| 1297 | struct skd_sg_io sksgio; |
| 1298 | |
| 1299 | memset(&sksgio, 0, sizeof(sksgio)); |
| 1300 | sksgio.mode = mode; |
| 1301 | sksgio.argp = argp; |
| 1302 | sksgio.iov = &sksgio.no_iov_iov; |
| 1303 | |
| 1304 | switch (skdev->state) { |
| 1305 | case SKD_DRVR_STATE_ONLINE: |
| 1306 | case SKD_DRVR_STATE_BUSY_IMMINENT: |
| 1307 | break; |
| 1308 | |
| 1309 | default: |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1310 | pr_debug("%s:%s:%d drive not online\n", |
| 1311 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1312 | rc = -ENXIO; |
| 1313 | goto out; |
| 1314 | } |
| 1315 | |
Akhil Bhansali | f721bb0 | 2013-10-23 13:00:08 +0100 | [diff] [blame] | 1316 | rc = skd_sg_io_get_and_check_args(skdev, &sksgio); |
| 1317 | if (rc) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1318 | goto out; |
| 1319 | |
Akhil Bhansali | f721bb0 | 2013-10-23 13:00:08 +0100 | [diff] [blame] | 1320 | rc = skd_sg_io_obtain_skspcl(skdev, &sksgio); |
| 1321 | if (rc) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1322 | goto out; |
| 1323 | |
Akhil Bhansali | f721bb0 | 2013-10-23 13:00:08 +0100 | [diff] [blame] | 1324 | rc = skd_sg_io_prep_buffering(skdev, &sksgio); |
| 1325 | if (rc) |
| 1326 | goto out; |
| 1327 | |
| 1328 | rc = skd_sg_io_copy_buffer(skdev, &sksgio, SG_DXFER_TO_DEV); |
| 1329 | if (rc) |
| 1330 | goto out; |
| 1331 | |
| 1332 | rc = skd_sg_io_send_fitmsg(skdev, &sksgio); |
| 1333 | if (rc) |
| 1334 | goto out; |
| 1335 | |
| 1336 | rc = skd_sg_io_await(skdev, &sksgio); |
| 1337 | if (rc) |
| 1338 | goto out; |
| 1339 | |
| 1340 | rc = skd_sg_io_copy_buffer(skdev, &sksgio, SG_DXFER_FROM_DEV); |
| 1341 | if (rc) |
| 1342 | goto out; |
| 1343 | |
| 1344 | rc = skd_sg_io_put_status(skdev, &sksgio); |
| 1345 | if (rc) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1346 | goto out; |
| 1347 | |
| 1348 | rc = 0; |
| 1349 | |
| 1350 | out: |
| 1351 | skd_sg_io_release_skspcl(skdev, &sksgio); |
| 1352 | |
| 1353 | if (sksgio.iov != NULL && sksgio.iov != &sksgio.no_iov_iov) |
| 1354 | kfree(sksgio.iov); |
| 1355 | return rc; |
| 1356 | } |
| 1357 | |
| 1358 | static int skd_sg_io_get_and_check_args(struct skd_device *skdev, |
| 1359 | struct skd_sg_io *sksgio) |
| 1360 | { |
| 1361 | struct sg_io_hdr *sgp = &sksgio->sg; |
| 1362 | int i, acc; |
| 1363 | |
| 1364 | if (!access_ok(VERIFY_WRITE, sksgio->argp, sizeof(sg_io_hdr_t))) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1365 | pr_debug("%s:%s:%d access sg failed %p\n", |
| 1366 | skdev->name, __func__, __LINE__, sksgio->argp); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1367 | return -EFAULT; |
| 1368 | } |
| 1369 | |
| 1370 | if (__copy_from_user(sgp, sksgio->argp, sizeof(sg_io_hdr_t))) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1371 | pr_debug("%s:%s:%d copy_from_user sg failed %p\n", |
| 1372 | skdev->name, __func__, __LINE__, sksgio->argp); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1373 | return -EFAULT; |
| 1374 | } |
| 1375 | |
| 1376 | if (sgp->interface_id != SG_INTERFACE_ID_ORIG) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1377 | pr_debug("%s:%s:%d interface_id invalid 0x%x\n", |
| 1378 | skdev->name, __func__, __LINE__, sgp->interface_id); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1379 | return -EINVAL; |
| 1380 | } |
| 1381 | |
| 1382 | if (sgp->cmd_len > sizeof(sksgio->cdb)) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1383 | pr_debug("%s:%s:%d cmd_len invalid %d\n", |
| 1384 | skdev->name, __func__, __LINE__, sgp->cmd_len); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1385 | return -EINVAL; |
| 1386 | } |
| 1387 | |
| 1388 | if (sgp->iovec_count > 256) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1389 | pr_debug("%s:%s:%d iovec_count invalid %d\n", |
| 1390 | skdev->name, __func__, __LINE__, sgp->iovec_count); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1391 | return -EINVAL; |
| 1392 | } |
| 1393 | |
| 1394 | if (sgp->dxfer_len > (PAGE_SIZE * SKD_N_SG_PER_SPECIAL)) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1395 | pr_debug("%s:%s:%d dxfer_len invalid %d\n", |
| 1396 | skdev->name, __func__, __LINE__, sgp->dxfer_len); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1397 | return -EINVAL; |
| 1398 | } |
| 1399 | |
| 1400 | switch (sgp->dxfer_direction) { |
| 1401 | case SG_DXFER_NONE: |
| 1402 | acc = -1; |
| 1403 | break; |
| 1404 | |
| 1405 | case SG_DXFER_TO_DEV: |
| 1406 | acc = VERIFY_READ; |
| 1407 | break; |
| 1408 | |
| 1409 | case SG_DXFER_FROM_DEV: |
| 1410 | case SG_DXFER_TO_FROM_DEV: |
| 1411 | acc = VERIFY_WRITE; |
| 1412 | break; |
| 1413 | |
| 1414 | default: |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1415 | pr_debug("%s:%s:%d dxfer_dir invalid %d\n", |
| 1416 | skdev->name, __func__, __LINE__, sgp->dxfer_direction); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1417 | return -EINVAL; |
| 1418 | } |
| 1419 | |
| 1420 | if (copy_from_user(sksgio->cdb, sgp->cmdp, sgp->cmd_len)) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1421 | pr_debug("%s:%s:%d copy_from_user cmdp failed %p\n", |
| 1422 | skdev->name, __func__, __LINE__, sgp->cmdp); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1423 | return -EFAULT; |
| 1424 | } |
| 1425 | |
| 1426 | if (sgp->mx_sb_len != 0) { |
| 1427 | if (!access_ok(VERIFY_WRITE, sgp->sbp, sgp->mx_sb_len)) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1428 | pr_debug("%s:%s:%d access sbp failed %p\n", |
| 1429 | skdev->name, __func__, __LINE__, sgp->sbp); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1430 | return -EFAULT; |
| 1431 | } |
| 1432 | } |
| 1433 | |
| 1434 | if (sgp->iovec_count == 0) { |
| 1435 | sksgio->iov[0].iov_base = sgp->dxferp; |
| 1436 | sksgio->iov[0].iov_len = sgp->dxfer_len; |
| 1437 | sksgio->iovcnt = 1; |
| 1438 | sksgio->dxfer_len = sgp->dxfer_len; |
| 1439 | } else { |
| 1440 | struct sg_iovec *iov; |
| 1441 | uint nbytes = sizeof(*iov) * sgp->iovec_count; |
| 1442 | size_t iov_data_len; |
| 1443 | |
| 1444 | iov = kmalloc(nbytes, GFP_KERNEL); |
| 1445 | if (iov == NULL) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1446 | pr_debug("%s:%s:%d alloc iovec failed %d\n", |
| 1447 | skdev->name, __func__, __LINE__, |
| 1448 | sgp->iovec_count); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1449 | return -ENOMEM; |
| 1450 | } |
| 1451 | sksgio->iov = iov; |
| 1452 | sksgio->iovcnt = sgp->iovec_count; |
| 1453 | |
| 1454 | if (copy_from_user(iov, sgp->dxferp, nbytes)) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1455 | pr_debug("%s:%s:%d copy_from_user iovec failed %p\n", |
| 1456 | skdev->name, __func__, __LINE__, sgp->dxferp); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1457 | return -EFAULT; |
| 1458 | } |
| 1459 | |
| 1460 | /* |
| 1461 | * Sum up the vecs, making sure they don't overflow |
| 1462 | */ |
| 1463 | iov_data_len = 0; |
| 1464 | for (i = 0; i < sgp->iovec_count; i++) { |
| 1465 | if (iov_data_len + iov[i].iov_len < iov_data_len) |
| 1466 | return -EINVAL; |
| 1467 | iov_data_len += iov[i].iov_len; |
| 1468 | } |
| 1469 | |
| 1470 | /* SG_IO howto says that the shorter of the two wins */ |
| 1471 | if (sgp->dxfer_len < iov_data_len) { |
| 1472 | sksgio->iovcnt = iov_shorten((struct iovec *)iov, |
| 1473 | sgp->iovec_count, |
| 1474 | sgp->dxfer_len); |
| 1475 | sksgio->dxfer_len = sgp->dxfer_len; |
| 1476 | } else |
| 1477 | sksgio->dxfer_len = iov_data_len; |
| 1478 | } |
| 1479 | |
| 1480 | if (sgp->dxfer_direction != SG_DXFER_NONE) { |
| 1481 | struct sg_iovec *iov = sksgio->iov; |
| 1482 | for (i = 0; i < sksgio->iovcnt; i++, iov++) { |
| 1483 | if (!access_ok(acc, iov->iov_base, iov->iov_len)) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1484 | pr_debug("%s:%s:%d access data failed %p/%d\n", |
| 1485 | skdev->name, __func__, __LINE__, |
| 1486 | iov->iov_base, (int)iov->iov_len); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1487 | return -EFAULT; |
| 1488 | } |
| 1489 | } |
| 1490 | } |
| 1491 | |
| 1492 | return 0; |
| 1493 | } |
| 1494 | |
| 1495 | static int skd_sg_io_obtain_skspcl(struct skd_device *skdev, |
| 1496 | struct skd_sg_io *sksgio) |
| 1497 | { |
| 1498 | struct skd_special_context *skspcl = NULL; |
| 1499 | int rc; |
| 1500 | |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 1501 | for (;;) { |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1502 | ulong flags; |
| 1503 | |
| 1504 | spin_lock_irqsave(&skdev->lock, flags); |
| 1505 | skspcl = skdev->skspcl_free_list; |
| 1506 | if (skspcl != NULL) { |
| 1507 | skdev->skspcl_free_list = |
| 1508 | (struct skd_special_context *)skspcl->req.next; |
| 1509 | skspcl->req.id += SKD_ID_INCR; |
| 1510 | skspcl->req.state = SKD_REQ_STATE_SETUP; |
| 1511 | skspcl->orphaned = 0; |
| 1512 | skspcl->req.n_sg = 0; |
| 1513 | } |
| 1514 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 1515 | |
| 1516 | if (skspcl != NULL) { |
| 1517 | rc = 0; |
| 1518 | break; |
| 1519 | } |
| 1520 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1521 | pr_debug("%s:%s:%d blocking\n", |
| 1522 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1523 | |
| 1524 | rc = wait_event_interruptible_timeout( |
| 1525 | skdev->waitq, |
| 1526 | (skdev->skspcl_free_list != NULL), |
| 1527 | msecs_to_jiffies(sksgio->sg.timeout)); |
| 1528 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1529 | pr_debug("%s:%s:%d unblocking, rc=%d\n", |
| 1530 | skdev->name, __func__, __LINE__, rc); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1531 | |
| 1532 | if (rc <= 0) { |
| 1533 | if (rc == 0) |
| 1534 | rc = -ETIMEDOUT; |
| 1535 | else |
| 1536 | rc = -EINTR; |
| 1537 | break; |
| 1538 | } |
| 1539 | /* |
| 1540 | * If we get here rc > 0 meaning the timeout to |
| 1541 | * wait_event_interruptible_timeout() had time left, hence the |
| 1542 | * sought event -- non-empty free list -- happened. |
| 1543 | * Retry the allocation. |
| 1544 | */ |
| 1545 | } |
| 1546 | sksgio->skspcl = skspcl; |
| 1547 | |
| 1548 | return rc; |
| 1549 | } |
| 1550 | |
| 1551 | static int skd_skreq_prep_buffering(struct skd_device *skdev, |
| 1552 | struct skd_request_context *skreq, |
| 1553 | u32 dxfer_len) |
| 1554 | { |
| 1555 | u32 resid = dxfer_len; |
| 1556 | |
| 1557 | /* |
| 1558 | * The DMA engine must have aligned addresses and byte counts. |
| 1559 | */ |
| 1560 | resid += (-resid) & 3; |
| 1561 | skreq->sg_byte_count = resid; |
| 1562 | |
| 1563 | skreq->n_sg = 0; |
| 1564 | |
| 1565 | while (resid > 0) { |
| 1566 | u32 nbytes = PAGE_SIZE; |
| 1567 | u32 ix = skreq->n_sg; |
| 1568 | struct scatterlist *sg = &skreq->sg[ix]; |
| 1569 | struct fit_sg_descriptor *sksg = &skreq->sksg_list[ix]; |
| 1570 | struct page *page; |
| 1571 | |
| 1572 | if (nbytes > resid) |
| 1573 | nbytes = resid; |
| 1574 | |
| 1575 | page = alloc_page(GFP_KERNEL); |
| 1576 | if (page == NULL) |
| 1577 | return -ENOMEM; |
| 1578 | |
| 1579 | sg_set_page(sg, page, nbytes, 0); |
| 1580 | |
| 1581 | /* TODO: This should be going through a pci_???() |
| 1582 | * routine to do proper mapping. */ |
| 1583 | sksg->control = FIT_SGD_CONTROL_NOT_LAST; |
| 1584 | sksg->byte_count = nbytes; |
| 1585 | |
| 1586 | sksg->host_side_addr = sg_phys(sg); |
| 1587 | |
| 1588 | sksg->dev_side_addr = 0; |
| 1589 | sksg->next_desc_ptr = skreq->sksg_dma_address + |
| 1590 | (ix + 1) * sizeof(*sksg); |
| 1591 | |
| 1592 | skreq->n_sg++; |
| 1593 | resid -= nbytes; |
| 1594 | } |
| 1595 | |
| 1596 | if (skreq->n_sg > 0) { |
| 1597 | u32 ix = skreq->n_sg - 1; |
| 1598 | struct fit_sg_descriptor *sksg = &skreq->sksg_list[ix]; |
| 1599 | |
| 1600 | sksg->control = FIT_SGD_CONTROL_LAST; |
| 1601 | sksg->next_desc_ptr = 0; |
| 1602 | } |
| 1603 | |
| 1604 | if (unlikely(skdev->dbg_level > 1)) { |
| 1605 | u32 i; |
| 1606 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1607 | pr_debug("%s:%s:%d skreq=%x sksg_list=%p sksg_dma=%llx\n", |
| 1608 | skdev->name, __func__, __LINE__, |
| 1609 | skreq->id, skreq->sksg_list, skreq->sksg_dma_address); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1610 | for (i = 0; i < skreq->n_sg; i++) { |
| 1611 | struct fit_sg_descriptor *sgd = &skreq->sksg_list[i]; |
| 1612 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1613 | pr_debug("%s:%s:%d sg[%d] count=%u ctrl=0x%x " |
| 1614 | "addr=0x%llx next=0x%llx\n", |
| 1615 | skdev->name, __func__, __LINE__, |
| 1616 | i, sgd->byte_count, sgd->control, |
| 1617 | sgd->host_side_addr, sgd->next_desc_ptr); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1618 | } |
| 1619 | } |
| 1620 | |
| 1621 | return 0; |
| 1622 | } |
| 1623 | |
| 1624 | static int skd_sg_io_prep_buffering(struct skd_device *skdev, |
| 1625 | struct skd_sg_io *sksgio) |
| 1626 | { |
| 1627 | struct skd_special_context *skspcl = sksgio->skspcl; |
| 1628 | struct skd_request_context *skreq = &skspcl->req; |
| 1629 | u32 dxfer_len = sksgio->dxfer_len; |
| 1630 | int rc; |
| 1631 | |
| 1632 | rc = skd_skreq_prep_buffering(skdev, skreq, dxfer_len); |
| 1633 | /* |
| 1634 | * Eventually, errors or not, skd_release_special() is called |
| 1635 | * to recover allocations including partial allocations. |
| 1636 | */ |
| 1637 | return rc; |
| 1638 | } |
| 1639 | |
| 1640 | static int skd_sg_io_copy_buffer(struct skd_device *skdev, |
| 1641 | struct skd_sg_io *sksgio, int dxfer_dir) |
| 1642 | { |
| 1643 | struct skd_special_context *skspcl = sksgio->skspcl; |
| 1644 | u32 iov_ix = 0; |
| 1645 | struct sg_iovec curiov; |
| 1646 | u32 sksg_ix = 0; |
| 1647 | u8 *bufp = NULL; |
| 1648 | u32 buf_len = 0; |
| 1649 | u32 resid = sksgio->dxfer_len; |
| 1650 | int rc; |
| 1651 | |
| 1652 | curiov.iov_len = 0; |
| 1653 | curiov.iov_base = NULL; |
| 1654 | |
| 1655 | if (dxfer_dir != sksgio->sg.dxfer_direction) { |
| 1656 | if (dxfer_dir != SG_DXFER_TO_DEV || |
| 1657 | sksgio->sg.dxfer_direction != SG_DXFER_TO_FROM_DEV) |
| 1658 | return 0; |
| 1659 | } |
| 1660 | |
| 1661 | while (resid > 0) { |
| 1662 | u32 nbytes = PAGE_SIZE; |
| 1663 | |
| 1664 | if (curiov.iov_len == 0) { |
| 1665 | curiov = sksgio->iov[iov_ix++]; |
| 1666 | continue; |
| 1667 | } |
| 1668 | |
| 1669 | if (buf_len == 0) { |
| 1670 | struct page *page; |
| 1671 | page = sg_page(&skspcl->req.sg[sksg_ix++]); |
| 1672 | bufp = page_address(page); |
| 1673 | buf_len = PAGE_SIZE; |
| 1674 | } |
| 1675 | |
| 1676 | nbytes = min_t(u32, nbytes, resid); |
| 1677 | nbytes = min_t(u32, nbytes, curiov.iov_len); |
| 1678 | nbytes = min_t(u32, nbytes, buf_len); |
| 1679 | |
| 1680 | if (dxfer_dir == SG_DXFER_TO_DEV) |
| 1681 | rc = __copy_from_user(bufp, curiov.iov_base, nbytes); |
| 1682 | else |
| 1683 | rc = __copy_to_user(curiov.iov_base, bufp, nbytes); |
| 1684 | |
| 1685 | if (rc) |
| 1686 | return -EFAULT; |
| 1687 | |
| 1688 | resid -= nbytes; |
| 1689 | curiov.iov_len -= nbytes; |
| 1690 | curiov.iov_base += nbytes; |
| 1691 | buf_len -= nbytes; |
| 1692 | } |
| 1693 | |
| 1694 | return 0; |
| 1695 | } |
| 1696 | |
| 1697 | static int skd_sg_io_send_fitmsg(struct skd_device *skdev, |
| 1698 | struct skd_sg_io *sksgio) |
| 1699 | { |
| 1700 | struct skd_special_context *skspcl = sksgio->skspcl; |
| 1701 | struct fit_msg_hdr *fmh = (struct fit_msg_hdr *)skspcl->msg_buf; |
| 1702 | struct skd_scsi_request *scsi_req = (struct skd_scsi_request *)&fmh[1]; |
| 1703 | |
| 1704 | memset(skspcl->msg_buf, 0, SKD_N_SPECIAL_FITMSG_BYTES); |
| 1705 | |
| 1706 | /* Initialize the FIT msg header */ |
| 1707 | fmh->protocol_id = FIT_PROTOCOL_ID_SOFIT; |
| 1708 | fmh->num_protocol_cmds_coalesced = 1; |
| 1709 | |
| 1710 | /* Initialize the SCSI request */ |
| 1711 | if (sksgio->sg.dxfer_direction != SG_DXFER_NONE) |
| 1712 | scsi_req->hdr.sg_list_dma_address = |
| 1713 | cpu_to_be64(skspcl->req.sksg_dma_address); |
| 1714 | scsi_req->hdr.tag = skspcl->req.id; |
| 1715 | scsi_req->hdr.sg_list_len_bytes = |
| 1716 | cpu_to_be32(skspcl->req.sg_byte_count); |
| 1717 | memcpy(scsi_req->cdb, sksgio->cdb, sizeof(scsi_req->cdb)); |
| 1718 | |
| 1719 | skspcl->req.state = SKD_REQ_STATE_BUSY; |
| 1720 | skd_send_special_fitmsg(skdev, skspcl); |
| 1721 | |
| 1722 | return 0; |
| 1723 | } |
| 1724 | |
| 1725 | static int skd_sg_io_await(struct skd_device *skdev, struct skd_sg_io *sksgio) |
| 1726 | { |
| 1727 | unsigned long flags; |
| 1728 | int rc; |
| 1729 | |
| 1730 | rc = wait_event_interruptible_timeout(skdev->waitq, |
| 1731 | (sksgio->skspcl->req.state != |
| 1732 | SKD_REQ_STATE_BUSY), |
| 1733 | msecs_to_jiffies(sksgio->sg. |
| 1734 | timeout)); |
| 1735 | |
| 1736 | spin_lock_irqsave(&skdev->lock, flags); |
| 1737 | |
| 1738 | if (sksgio->skspcl->req.state == SKD_REQ_STATE_ABORTED) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1739 | pr_debug("%s:%s:%d skspcl %p aborted\n", |
| 1740 | skdev->name, __func__, __LINE__, sksgio->skspcl); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1741 | |
| 1742 | /* Build check cond, sense and let command finish. */ |
| 1743 | /* For a timeout, we must fabricate completion and sense |
| 1744 | * data to complete the command */ |
| 1745 | sksgio->skspcl->req.completion.status = |
| 1746 | SAM_STAT_CHECK_CONDITION; |
| 1747 | |
| 1748 | memset(&sksgio->skspcl->req.err_info, 0, |
| 1749 | sizeof(sksgio->skspcl->req.err_info)); |
| 1750 | sksgio->skspcl->req.err_info.type = 0x70; |
| 1751 | sksgio->skspcl->req.err_info.key = ABORTED_COMMAND; |
| 1752 | sksgio->skspcl->req.err_info.code = 0x44; |
| 1753 | sksgio->skspcl->req.err_info.qual = 0; |
| 1754 | rc = 0; |
| 1755 | } else if (sksgio->skspcl->req.state != SKD_REQ_STATE_BUSY) |
| 1756 | /* No longer on the adapter. We finish. */ |
| 1757 | rc = 0; |
| 1758 | else { |
| 1759 | /* Something's gone wrong. Still busy. Timeout or |
| 1760 | * user interrupted (control-C). Mark as an orphan |
| 1761 | * so it will be disposed when completed. */ |
| 1762 | sksgio->skspcl->orphaned = 1; |
| 1763 | sksgio->skspcl = NULL; |
| 1764 | if (rc == 0) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1765 | pr_debug("%s:%s:%d timed out %p (%u ms)\n", |
| 1766 | skdev->name, __func__, __LINE__, |
| 1767 | sksgio, sksgio->sg.timeout); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1768 | rc = -ETIMEDOUT; |
| 1769 | } else { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1770 | pr_debug("%s:%s:%d cntlc %p\n", |
| 1771 | skdev->name, __func__, __LINE__, sksgio); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1772 | rc = -EINTR; |
| 1773 | } |
| 1774 | } |
| 1775 | |
| 1776 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 1777 | |
| 1778 | return rc; |
| 1779 | } |
| 1780 | |
| 1781 | static int skd_sg_io_put_status(struct skd_device *skdev, |
| 1782 | struct skd_sg_io *sksgio) |
| 1783 | { |
| 1784 | struct sg_io_hdr *sgp = &sksgio->sg; |
| 1785 | struct skd_special_context *skspcl = sksgio->skspcl; |
| 1786 | int resid = 0; |
| 1787 | |
| 1788 | u32 nb = be32_to_cpu(skspcl->req.completion.num_returned_bytes); |
| 1789 | |
| 1790 | sgp->status = skspcl->req.completion.status; |
| 1791 | resid = sksgio->dxfer_len - nb; |
| 1792 | |
| 1793 | sgp->masked_status = sgp->status & STATUS_MASK; |
| 1794 | sgp->msg_status = 0; |
| 1795 | sgp->host_status = 0; |
| 1796 | sgp->driver_status = 0; |
| 1797 | sgp->resid = resid; |
| 1798 | if (sgp->masked_status || sgp->host_status || sgp->driver_status) |
| 1799 | sgp->info |= SG_INFO_CHECK; |
| 1800 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1801 | pr_debug("%s:%s:%d status %x masked %x resid 0x%x\n", |
| 1802 | skdev->name, __func__, __LINE__, |
| 1803 | sgp->status, sgp->masked_status, sgp->resid); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1804 | |
| 1805 | if (sgp->masked_status == SAM_STAT_CHECK_CONDITION) { |
| 1806 | if (sgp->mx_sb_len > 0) { |
| 1807 | struct fit_comp_error_info *ei = &skspcl->req.err_info; |
| 1808 | u32 nbytes = sizeof(*ei); |
| 1809 | |
| 1810 | nbytes = min_t(u32, nbytes, sgp->mx_sb_len); |
| 1811 | |
| 1812 | sgp->sb_len_wr = nbytes; |
| 1813 | |
| 1814 | if (__copy_to_user(sgp->sbp, ei, nbytes)) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1815 | pr_debug("%s:%s:%d copy_to_user sense failed %p\n", |
| 1816 | skdev->name, __func__, __LINE__, |
| 1817 | sgp->sbp); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1818 | return -EFAULT; |
| 1819 | } |
| 1820 | } |
| 1821 | } |
| 1822 | |
| 1823 | if (__copy_to_user(sksgio->argp, sgp, sizeof(sg_io_hdr_t))) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 1824 | pr_debug("%s:%s:%d copy_to_user sg failed %p\n", |
| 1825 | skdev->name, __func__, __LINE__, sksgio->argp); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 1826 | return -EFAULT; |
| 1827 | } |
| 1828 | |
| 1829 | return 0; |
| 1830 | } |
| 1831 | |
| 1832 | static int skd_sg_io_release_skspcl(struct skd_device *skdev, |
| 1833 | struct skd_sg_io *sksgio) |
| 1834 | { |
| 1835 | struct skd_special_context *skspcl = sksgio->skspcl; |
| 1836 | |
| 1837 | if (skspcl != NULL) { |
| 1838 | ulong flags; |
| 1839 | |
| 1840 | sksgio->skspcl = NULL; |
| 1841 | |
| 1842 | spin_lock_irqsave(&skdev->lock, flags); |
| 1843 | skd_release_special(skdev, skspcl); |
| 1844 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 1845 | } |
| 1846 | |
| 1847 | return 0; |
| 1848 | } |
| 1849 | |
| 1850 | /* |
| 1851 | ***************************************************************************** |
| 1852 | * INTERNAL REQUESTS -- generated by driver itself |
| 1853 | ***************************************************************************** |
| 1854 | */ |
| 1855 | |
| 1856 | static int skd_format_internal_skspcl(struct skd_device *skdev) |
| 1857 | { |
| 1858 | struct skd_special_context *skspcl = &skdev->internal_skspcl; |
| 1859 | struct fit_sg_descriptor *sgd = &skspcl->req.sksg_list[0]; |
| 1860 | struct fit_msg_hdr *fmh; |
| 1861 | uint64_t dma_address; |
| 1862 | struct skd_scsi_request *scsi; |
| 1863 | |
| 1864 | fmh = (struct fit_msg_hdr *)&skspcl->msg_buf[0]; |
| 1865 | fmh->protocol_id = FIT_PROTOCOL_ID_SOFIT; |
| 1866 | fmh->num_protocol_cmds_coalesced = 1; |
| 1867 | |
| 1868 | scsi = (struct skd_scsi_request *)&skspcl->msg_buf[64]; |
| 1869 | memset(scsi, 0, sizeof(*scsi)); |
| 1870 | dma_address = skspcl->req.sksg_dma_address; |
| 1871 | scsi->hdr.sg_list_dma_address = cpu_to_be64(dma_address); |
| 1872 | sgd->control = FIT_SGD_CONTROL_LAST; |
| 1873 | sgd->byte_count = 0; |
| 1874 | sgd->host_side_addr = skspcl->db_dma_address; |
| 1875 | sgd->dev_side_addr = 0; |
| 1876 | sgd->next_desc_ptr = 0LL; |
| 1877 | |
| 1878 | return 1; |
| 1879 | } |
| 1880 | |
| 1881 | #define WR_BUF_SIZE SKD_N_INTERNAL_BYTES |
| 1882 | |
| 1883 | static void skd_send_internal_skspcl(struct skd_device *skdev, |
| 1884 | struct skd_special_context *skspcl, |
| 1885 | u8 opcode) |
| 1886 | { |
| 1887 | struct fit_sg_descriptor *sgd = &skspcl->req.sksg_list[0]; |
| 1888 | struct skd_scsi_request *scsi; |
| 1889 | unsigned char *buf = skspcl->data_buf; |
| 1890 | int i; |
| 1891 | |
| 1892 | if (skspcl->req.state != SKD_REQ_STATE_IDLE) |
| 1893 | /* |
| 1894 | * A refresh is already in progress. |
| 1895 | * Just wait for it to finish. |
| 1896 | */ |
| 1897 | return; |
| 1898 | |
| 1899 | SKD_ASSERT((skspcl->req.id & SKD_ID_INCR) == 0); |
| 1900 | skspcl->req.state = SKD_REQ_STATE_BUSY; |
| 1901 | skspcl->req.id += SKD_ID_INCR; |
| 1902 | |
| 1903 | scsi = (struct skd_scsi_request *)&skspcl->msg_buf[64]; |
| 1904 | scsi->hdr.tag = skspcl->req.id; |
| 1905 | |
| 1906 | memset(scsi->cdb, 0, sizeof(scsi->cdb)); |
| 1907 | |
| 1908 | switch (opcode) { |
| 1909 | case TEST_UNIT_READY: |
| 1910 | scsi->cdb[0] = TEST_UNIT_READY; |
| 1911 | sgd->byte_count = 0; |
| 1912 | scsi->hdr.sg_list_len_bytes = 0; |
| 1913 | break; |
| 1914 | |
| 1915 | case READ_CAPACITY: |
| 1916 | scsi->cdb[0] = READ_CAPACITY; |
| 1917 | sgd->byte_count = SKD_N_READ_CAP_BYTES; |
| 1918 | scsi->hdr.sg_list_len_bytes = cpu_to_be32(sgd->byte_count); |
| 1919 | break; |
| 1920 | |
| 1921 | case INQUIRY: |
| 1922 | scsi->cdb[0] = INQUIRY; |
| 1923 | scsi->cdb[1] = 0x01; /* evpd */ |
| 1924 | scsi->cdb[2] = 0x80; /* serial number page */ |
| 1925 | scsi->cdb[4] = 0x10; |
| 1926 | sgd->byte_count = 16; |
| 1927 | scsi->hdr.sg_list_len_bytes = cpu_to_be32(sgd->byte_count); |
| 1928 | break; |
| 1929 | |
| 1930 | case SYNCHRONIZE_CACHE: |
| 1931 | scsi->cdb[0] = SYNCHRONIZE_CACHE; |
| 1932 | sgd->byte_count = 0; |
| 1933 | scsi->hdr.sg_list_len_bytes = 0; |
| 1934 | break; |
| 1935 | |
| 1936 | case WRITE_BUFFER: |
| 1937 | scsi->cdb[0] = WRITE_BUFFER; |
| 1938 | scsi->cdb[1] = 0x02; |
| 1939 | scsi->cdb[7] = (WR_BUF_SIZE & 0xFF00) >> 8; |
| 1940 | scsi->cdb[8] = WR_BUF_SIZE & 0xFF; |
| 1941 | sgd->byte_count = WR_BUF_SIZE; |
| 1942 | scsi->hdr.sg_list_len_bytes = cpu_to_be32(sgd->byte_count); |
| 1943 | /* fill incrementing byte pattern */ |
| 1944 | for (i = 0; i < sgd->byte_count; i++) |
| 1945 | buf[i] = i & 0xFF; |
| 1946 | break; |
| 1947 | |
| 1948 | case READ_BUFFER: |
| 1949 | scsi->cdb[0] = READ_BUFFER; |
| 1950 | scsi->cdb[1] = 0x02; |
| 1951 | scsi->cdb[7] = (WR_BUF_SIZE & 0xFF00) >> 8; |
| 1952 | scsi->cdb[8] = WR_BUF_SIZE & 0xFF; |
| 1953 | sgd->byte_count = WR_BUF_SIZE; |
| 1954 | scsi->hdr.sg_list_len_bytes = cpu_to_be32(sgd->byte_count); |
| 1955 | memset(skspcl->data_buf, 0, sgd->byte_count); |
| 1956 | break; |
| 1957 | |
| 1958 | default: |
| 1959 | SKD_ASSERT("Don't know what to send"); |
| 1960 | return; |
| 1961 | |
| 1962 | } |
| 1963 | skd_send_special_fitmsg(skdev, skspcl); |
| 1964 | } |
| 1965 | |
| 1966 | static void skd_refresh_device_data(struct skd_device *skdev) |
| 1967 | { |
| 1968 | struct skd_special_context *skspcl = &skdev->internal_skspcl; |
| 1969 | |
| 1970 | skd_send_internal_skspcl(skdev, skspcl, TEST_UNIT_READY); |
| 1971 | } |
| 1972 | |
| 1973 | static int skd_chk_read_buf(struct skd_device *skdev, |
| 1974 | struct skd_special_context *skspcl) |
| 1975 | { |
| 1976 | unsigned char *buf = skspcl->data_buf; |
| 1977 | int i; |
| 1978 | |
| 1979 | /* check for incrementing byte pattern */ |
| 1980 | for (i = 0; i < WR_BUF_SIZE; i++) |
| 1981 | if (buf[i] != (i & 0xFF)) |
| 1982 | return 1; |
| 1983 | |
| 1984 | return 0; |
| 1985 | } |
| 1986 | |
| 1987 | static void skd_log_check_status(struct skd_device *skdev, u8 status, u8 key, |
| 1988 | u8 code, u8 qual, u8 fruc) |
| 1989 | { |
| 1990 | /* If the check condition is of special interest, log a message */ |
| 1991 | if ((status == SAM_STAT_CHECK_CONDITION) && (key == 0x02) |
| 1992 | && (code == 0x04) && (qual == 0x06)) { |
| 1993 | pr_err("(%s): *** LOST_WRITE_DATA ERROR *** key/asc/" |
| 1994 | "ascq/fruc %02x/%02x/%02x/%02x\n", |
| 1995 | skd_name(skdev), key, code, qual, fruc); |
| 1996 | } |
| 1997 | } |
| 1998 | |
| 1999 | static void skd_complete_internal(struct skd_device *skdev, |
| 2000 | volatile struct fit_completion_entry_v1 |
| 2001 | *skcomp, |
| 2002 | volatile struct fit_comp_error_info *skerr, |
| 2003 | struct skd_special_context *skspcl) |
| 2004 | { |
| 2005 | u8 *buf = skspcl->data_buf; |
| 2006 | u8 status; |
| 2007 | int i; |
| 2008 | struct skd_scsi_request *scsi = |
| 2009 | (struct skd_scsi_request *)&skspcl->msg_buf[64]; |
| 2010 | |
| 2011 | SKD_ASSERT(skspcl == &skdev->internal_skspcl); |
| 2012 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2013 | pr_debug("%s:%s:%d complete internal %x\n", |
| 2014 | skdev->name, __func__, __LINE__, scsi->cdb[0]); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2015 | |
| 2016 | skspcl->req.completion = *skcomp; |
| 2017 | skspcl->req.state = SKD_REQ_STATE_IDLE; |
| 2018 | skspcl->req.id += SKD_ID_INCR; |
| 2019 | |
| 2020 | status = skspcl->req.completion.status; |
| 2021 | |
| 2022 | skd_log_check_status(skdev, status, skerr->key, skerr->code, |
| 2023 | skerr->qual, skerr->fruc); |
| 2024 | |
| 2025 | switch (scsi->cdb[0]) { |
| 2026 | case TEST_UNIT_READY: |
| 2027 | if (status == SAM_STAT_GOOD) |
| 2028 | skd_send_internal_skspcl(skdev, skspcl, WRITE_BUFFER); |
| 2029 | else if ((status == SAM_STAT_CHECK_CONDITION) && |
| 2030 | (skerr->key == MEDIUM_ERROR)) |
| 2031 | skd_send_internal_skspcl(skdev, skspcl, WRITE_BUFFER); |
| 2032 | else { |
| 2033 | if (skdev->state == SKD_DRVR_STATE_STOPPING) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2034 | pr_debug("%s:%s:%d TUR failed, don't send anymore state 0x%x\n", |
| 2035 | skdev->name, __func__, __LINE__, |
| 2036 | skdev->state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2037 | return; |
| 2038 | } |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2039 | pr_debug("%s:%s:%d **** TUR failed, retry skerr\n", |
| 2040 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2041 | skd_send_internal_skspcl(skdev, skspcl, 0x00); |
| 2042 | } |
| 2043 | break; |
| 2044 | |
| 2045 | case WRITE_BUFFER: |
| 2046 | if (status == SAM_STAT_GOOD) |
| 2047 | skd_send_internal_skspcl(skdev, skspcl, READ_BUFFER); |
| 2048 | else { |
| 2049 | if (skdev->state == SKD_DRVR_STATE_STOPPING) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2050 | pr_debug("%s:%s:%d write buffer failed, don't send anymore state 0x%x\n", |
| 2051 | skdev->name, __func__, __LINE__, |
| 2052 | skdev->state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2053 | return; |
| 2054 | } |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2055 | pr_debug("%s:%s:%d **** write buffer failed, retry skerr\n", |
| 2056 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2057 | skd_send_internal_skspcl(skdev, skspcl, 0x00); |
| 2058 | } |
| 2059 | break; |
| 2060 | |
| 2061 | case READ_BUFFER: |
| 2062 | if (status == SAM_STAT_GOOD) { |
| 2063 | if (skd_chk_read_buf(skdev, skspcl) == 0) |
| 2064 | skd_send_internal_skspcl(skdev, skspcl, |
| 2065 | READ_CAPACITY); |
| 2066 | else { |
| 2067 | pr_err( |
| 2068 | "(%s):*** W/R Buffer mismatch %d ***\n", |
| 2069 | skd_name(skdev), skdev->connect_retries); |
| 2070 | if (skdev->connect_retries < |
| 2071 | SKD_MAX_CONNECT_RETRIES) { |
| 2072 | skdev->connect_retries++; |
| 2073 | skd_soft_reset(skdev); |
| 2074 | } else { |
| 2075 | pr_err( |
| 2076 | "(%s): W/R Buffer Connect Error\n", |
| 2077 | skd_name(skdev)); |
| 2078 | return; |
| 2079 | } |
| 2080 | } |
| 2081 | |
| 2082 | } else { |
| 2083 | if (skdev->state == SKD_DRVR_STATE_STOPPING) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2084 | pr_debug("%s:%s:%d " |
| 2085 | "read buffer failed, don't send anymore state 0x%x\n", |
| 2086 | skdev->name, __func__, __LINE__, |
| 2087 | skdev->state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2088 | return; |
| 2089 | } |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2090 | pr_debug("%s:%s:%d " |
| 2091 | "**** read buffer failed, retry skerr\n", |
| 2092 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2093 | skd_send_internal_skspcl(skdev, skspcl, 0x00); |
| 2094 | } |
| 2095 | break; |
| 2096 | |
| 2097 | case READ_CAPACITY: |
| 2098 | skdev->read_cap_is_valid = 0; |
| 2099 | if (status == SAM_STAT_GOOD) { |
| 2100 | skdev->read_cap_last_lba = |
| 2101 | (buf[0] << 24) | (buf[1] << 16) | |
| 2102 | (buf[2] << 8) | buf[3]; |
| 2103 | skdev->read_cap_blocksize = |
| 2104 | (buf[4] << 24) | (buf[5] << 16) | |
| 2105 | (buf[6] << 8) | buf[7]; |
| 2106 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2107 | pr_debug("%s:%s:%d last lba %d, bs %d\n", |
| 2108 | skdev->name, __func__, __LINE__, |
| 2109 | skdev->read_cap_last_lba, |
| 2110 | skdev->read_cap_blocksize); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2111 | |
| 2112 | set_capacity(skdev->disk, skdev->read_cap_last_lba + 1); |
| 2113 | |
| 2114 | skdev->read_cap_is_valid = 1; |
| 2115 | |
| 2116 | skd_send_internal_skspcl(skdev, skspcl, INQUIRY); |
| 2117 | } else if ((status == SAM_STAT_CHECK_CONDITION) && |
| 2118 | (skerr->key == MEDIUM_ERROR)) { |
| 2119 | skdev->read_cap_last_lba = ~0; |
| 2120 | set_capacity(skdev->disk, skdev->read_cap_last_lba + 1); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2121 | pr_debug("%s:%s:%d " |
| 2122 | "**** MEDIUM ERROR caused READCAP to fail, ignore failure and continue to inquiry\n", |
| 2123 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2124 | skd_send_internal_skspcl(skdev, skspcl, INQUIRY); |
| 2125 | } else { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2126 | pr_debug("%s:%s:%d **** READCAP failed, retry TUR\n", |
| 2127 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2128 | skd_send_internal_skspcl(skdev, skspcl, |
| 2129 | TEST_UNIT_READY); |
| 2130 | } |
| 2131 | break; |
| 2132 | |
| 2133 | case INQUIRY: |
| 2134 | skdev->inquiry_is_valid = 0; |
| 2135 | if (status == SAM_STAT_GOOD) { |
| 2136 | skdev->inquiry_is_valid = 1; |
| 2137 | |
| 2138 | for (i = 0; i < 12; i++) |
| 2139 | skdev->inq_serial_num[i] = buf[i + 4]; |
| 2140 | skdev->inq_serial_num[12] = 0; |
| 2141 | } |
| 2142 | |
| 2143 | if (skd_unquiesce_dev(skdev) < 0) |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2144 | pr_debug("%s:%s:%d **** failed, to ONLINE device\n", |
| 2145 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2146 | /* connection is complete */ |
| 2147 | skdev->connect_retries = 0; |
| 2148 | break; |
| 2149 | |
| 2150 | case SYNCHRONIZE_CACHE: |
| 2151 | if (status == SAM_STAT_GOOD) |
| 2152 | skdev->sync_done = 1; |
| 2153 | else |
| 2154 | skdev->sync_done = -1; |
| 2155 | wake_up_interruptible(&skdev->waitq); |
| 2156 | break; |
| 2157 | |
| 2158 | default: |
| 2159 | SKD_ASSERT("we didn't send this"); |
| 2160 | } |
| 2161 | } |
| 2162 | |
| 2163 | /* |
| 2164 | ***************************************************************************** |
| 2165 | * FIT MESSAGES |
| 2166 | ***************************************************************************** |
| 2167 | */ |
| 2168 | |
| 2169 | static void skd_send_fitmsg(struct skd_device *skdev, |
| 2170 | struct skd_fitmsg_context *skmsg) |
| 2171 | { |
| 2172 | u64 qcmd; |
| 2173 | struct fit_msg_hdr *fmh; |
| 2174 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2175 | pr_debug("%s:%s:%d dma address 0x%llx, busy=%d\n", |
| 2176 | skdev->name, __func__, __LINE__, |
| 2177 | skmsg->mb_dma_address, skdev->in_flight); |
| 2178 | pr_debug("%s:%s:%d msg_buf 0x%p, offset %x\n", |
| 2179 | skdev->name, __func__, __LINE__, |
| 2180 | skmsg->msg_buf, skmsg->offset); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2181 | |
| 2182 | qcmd = skmsg->mb_dma_address; |
| 2183 | qcmd |= FIT_QCMD_QID_NORMAL; |
| 2184 | |
| 2185 | fmh = (struct fit_msg_hdr *)skmsg->msg_buf; |
| 2186 | skmsg->outstanding = fmh->num_protocol_cmds_coalesced; |
| 2187 | |
| 2188 | if (unlikely(skdev->dbg_level > 1)) { |
| 2189 | u8 *bp = (u8 *)skmsg->msg_buf; |
| 2190 | int i; |
| 2191 | for (i = 0; i < skmsg->length; i += 8) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2192 | pr_debug("%s:%s:%d msg[%2d] %02x %02x %02x %02x " |
| 2193 | "%02x %02x %02x %02x\n", |
| 2194 | skdev->name, __func__, __LINE__, |
| 2195 | i, bp[i + 0], bp[i + 1], bp[i + 2], |
| 2196 | bp[i + 3], bp[i + 4], bp[i + 5], |
| 2197 | bp[i + 6], bp[i + 7]); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2198 | if (i == 0) |
| 2199 | i = 64 - 8; |
| 2200 | } |
| 2201 | } |
| 2202 | |
| 2203 | if (skmsg->length > 256) |
| 2204 | qcmd |= FIT_QCMD_MSGSIZE_512; |
| 2205 | else if (skmsg->length > 128) |
| 2206 | qcmd |= FIT_QCMD_MSGSIZE_256; |
| 2207 | else if (skmsg->length > 64) |
| 2208 | qcmd |= FIT_QCMD_MSGSIZE_128; |
| 2209 | else |
| 2210 | /* |
| 2211 | * This makes no sense because the FIT msg header is |
| 2212 | * 64 bytes. If the msg is only 64 bytes long it has |
| 2213 | * no payload. |
| 2214 | */ |
| 2215 | qcmd |= FIT_QCMD_MSGSIZE_64; |
| 2216 | |
| 2217 | SKD_WRITEQ(skdev, qcmd, FIT_Q_COMMAND); |
| 2218 | |
| 2219 | } |
| 2220 | |
| 2221 | static void skd_send_special_fitmsg(struct skd_device *skdev, |
| 2222 | struct skd_special_context *skspcl) |
| 2223 | { |
| 2224 | u64 qcmd; |
| 2225 | |
| 2226 | if (unlikely(skdev->dbg_level > 1)) { |
| 2227 | u8 *bp = (u8 *)skspcl->msg_buf; |
| 2228 | int i; |
| 2229 | |
| 2230 | for (i = 0; i < SKD_N_SPECIAL_FITMSG_BYTES; i += 8) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2231 | pr_debug("%s:%s:%d spcl[%2d] %02x %02x %02x %02x " |
| 2232 | "%02x %02x %02x %02x\n", |
| 2233 | skdev->name, __func__, __LINE__, i, |
| 2234 | bp[i + 0], bp[i + 1], bp[i + 2], bp[i + 3], |
| 2235 | bp[i + 4], bp[i + 5], bp[i + 6], bp[i + 7]); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2236 | if (i == 0) |
| 2237 | i = 64 - 8; |
| 2238 | } |
| 2239 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2240 | pr_debug("%s:%s:%d skspcl=%p id=%04x sksg_list=%p sksg_dma=%llx\n", |
| 2241 | skdev->name, __func__, __LINE__, |
| 2242 | skspcl, skspcl->req.id, skspcl->req.sksg_list, |
| 2243 | skspcl->req.sksg_dma_address); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2244 | for (i = 0; i < skspcl->req.n_sg; i++) { |
| 2245 | struct fit_sg_descriptor *sgd = |
| 2246 | &skspcl->req.sksg_list[i]; |
| 2247 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2248 | pr_debug("%s:%s:%d sg[%d] count=%u ctrl=0x%x " |
| 2249 | "addr=0x%llx next=0x%llx\n", |
| 2250 | skdev->name, __func__, __LINE__, |
| 2251 | i, sgd->byte_count, sgd->control, |
| 2252 | sgd->host_side_addr, sgd->next_desc_ptr); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2253 | } |
| 2254 | } |
| 2255 | |
| 2256 | /* |
| 2257 | * Special FIT msgs are always 128 bytes: a 64-byte FIT hdr |
| 2258 | * and one 64-byte SSDI command. |
| 2259 | */ |
| 2260 | qcmd = skspcl->mb_dma_address; |
| 2261 | qcmd |= FIT_QCMD_QID_NORMAL + FIT_QCMD_MSGSIZE_128; |
| 2262 | |
| 2263 | SKD_WRITEQ(skdev, qcmd, FIT_Q_COMMAND); |
| 2264 | } |
| 2265 | |
| 2266 | /* |
| 2267 | ***************************************************************************** |
| 2268 | * COMPLETION QUEUE |
| 2269 | ***************************************************************************** |
| 2270 | */ |
| 2271 | |
| 2272 | static void skd_complete_other(struct skd_device *skdev, |
| 2273 | volatile struct fit_completion_entry_v1 *skcomp, |
| 2274 | volatile struct fit_comp_error_info *skerr); |
| 2275 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2276 | struct sns_info { |
| 2277 | u8 type; |
| 2278 | u8 stat; |
| 2279 | u8 key; |
| 2280 | u8 asc; |
| 2281 | u8 ascq; |
| 2282 | u8 mask; |
| 2283 | enum skd_check_status_action action; |
| 2284 | }; |
| 2285 | |
| 2286 | static struct sns_info skd_chkstat_table[] = { |
| 2287 | /* Good */ |
| 2288 | { 0x70, 0x02, RECOVERED_ERROR, 0, 0, 0x1c, |
| 2289 | SKD_CHECK_STATUS_REPORT_GOOD }, |
| 2290 | |
| 2291 | /* Smart alerts */ |
| 2292 | { 0x70, 0x02, NO_SENSE, 0x0B, 0x00, 0x1E, /* warnings */ |
| 2293 | SKD_CHECK_STATUS_REPORT_SMART_ALERT }, |
| 2294 | { 0x70, 0x02, NO_SENSE, 0x5D, 0x00, 0x1E, /* thresholds */ |
| 2295 | SKD_CHECK_STATUS_REPORT_SMART_ALERT }, |
| 2296 | { 0x70, 0x02, RECOVERED_ERROR, 0x0B, 0x01, 0x1F, /* temperature over trigger */ |
| 2297 | SKD_CHECK_STATUS_REPORT_SMART_ALERT }, |
| 2298 | |
| 2299 | /* Retry (with limits) */ |
| 2300 | { 0x70, 0x02, 0x0B, 0, 0, 0x1C, /* This one is for DMA ERROR */ |
| 2301 | SKD_CHECK_STATUS_REQUEUE_REQUEST }, |
| 2302 | { 0x70, 0x02, 0x06, 0x0B, 0x00, 0x1E, /* warnings */ |
| 2303 | SKD_CHECK_STATUS_REQUEUE_REQUEST }, |
| 2304 | { 0x70, 0x02, 0x06, 0x5D, 0x00, 0x1E, /* thresholds */ |
| 2305 | SKD_CHECK_STATUS_REQUEUE_REQUEST }, |
| 2306 | { 0x70, 0x02, 0x06, 0x80, 0x30, 0x1F, /* backup power */ |
| 2307 | SKD_CHECK_STATUS_REQUEUE_REQUEST }, |
| 2308 | |
| 2309 | /* Busy (or about to be) */ |
| 2310 | { 0x70, 0x02, 0x06, 0x3f, 0x01, 0x1F, /* fw changed */ |
| 2311 | SKD_CHECK_STATUS_BUSY_IMMINENT }, |
| 2312 | }; |
| 2313 | |
| 2314 | /* |
| 2315 | * Look up status and sense data to decide how to handle the error |
| 2316 | * from the device. |
| 2317 | * mask says which fields must match e.g., mask=0x18 means check |
| 2318 | * type and stat, ignore key, asc, ascq. |
| 2319 | */ |
| 2320 | |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 2321 | static enum skd_check_status_action |
| 2322 | skd_check_status(struct skd_device *skdev, |
| 2323 | u8 cmp_status, volatile struct fit_comp_error_info *skerr) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2324 | { |
| 2325 | int i, n; |
| 2326 | |
| 2327 | pr_err("(%s): key/asc/ascq/fruc %02x/%02x/%02x/%02x\n", |
| 2328 | skd_name(skdev), skerr->key, skerr->code, skerr->qual, |
| 2329 | skerr->fruc); |
| 2330 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2331 | pr_debug("%s:%s:%d stat: t=%02x stat=%02x k=%02x c=%02x q=%02x fruc=%02x\n", |
| 2332 | skdev->name, __func__, __LINE__, skerr->type, cmp_status, |
| 2333 | skerr->key, skerr->code, skerr->qual, skerr->fruc); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2334 | |
| 2335 | /* Does the info match an entry in the good category? */ |
| 2336 | n = sizeof(skd_chkstat_table) / sizeof(skd_chkstat_table[0]); |
| 2337 | for (i = 0; i < n; i++) { |
| 2338 | struct sns_info *sns = &skd_chkstat_table[i]; |
| 2339 | |
| 2340 | if (sns->mask & 0x10) |
| 2341 | if (skerr->type != sns->type) |
| 2342 | continue; |
| 2343 | |
| 2344 | if (sns->mask & 0x08) |
| 2345 | if (cmp_status != sns->stat) |
| 2346 | continue; |
| 2347 | |
| 2348 | if (sns->mask & 0x04) |
| 2349 | if (skerr->key != sns->key) |
| 2350 | continue; |
| 2351 | |
| 2352 | if (sns->mask & 0x02) |
| 2353 | if (skerr->code != sns->asc) |
| 2354 | continue; |
| 2355 | |
| 2356 | if (sns->mask & 0x01) |
| 2357 | if (skerr->qual != sns->ascq) |
| 2358 | continue; |
| 2359 | |
| 2360 | if (sns->action == SKD_CHECK_STATUS_REPORT_SMART_ALERT) { |
| 2361 | pr_err("(%s): SMART Alert: sense key/asc/ascq " |
| 2362 | "%02x/%02x/%02x\n", |
| 2363 | skd_name(skdev), skerr->key, |
| 2364 | skerr->code, skerr->qual); |
| 2365 | } |
| 2366 | return sns->action; |
| 2367 | } |
| 2368 | |
| 2369 | /* No other match, so nonzero status means error, |
| 2370 | * zero status means good |
| 2371 | */ |
| 2372 | if (cmp_status) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2373 | pr_debug("%s:%s:%d status check: error\n", |
| 2374 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2375 | return SKD_CHECK_STATUS_REPORT_ERROR; |
| 2376 | } |
| 2377 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2378 | pr_debug("%s:%s:%d status check good default\n", |
| 2379 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2380 | return SKD_CHECK_STATUS_REPORT_GOOD; |
| 2381 | } |
| 2382 | |
| 2383 | static void skd_resolve_req_exception(struct skd_device *skdev, |
| 2384 | struct skd_request_context *skreq) |
| 2385 | { |
| 2386 | u8 cmp_status = skreq->completion.status; |
| 2387 | |
| 2388 | switch (skd_check_status(skdev, cmp_status, &skreq->err_info)) { |
| 2389 | case SKD_CHECK_STATUS_REPORT_GOOD: |
| 2390 | case SKD_CHECK_STATUS_REPORT_SMART_ALERT: |
| 2391 | skd_end_request(skdev, skreq, 0); |
| 2392 | break; |
| 2393 | |
| 2394 | case SKD_CHECK_STATUS_BUSY_IMMINENT: |
| 2395 | skd_log_skreq(skdev, skreq, "retry(busy)"); |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 2396 | blk_requeue_request(skdev->queue, skreq->req); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2397 | pr_info("(%s) drive BUSY imminent\n", skd_name(skdev)); |
| 2398 | skdev->state = SKD_DRVR_STATE_BUSY_IMMINENT; |
| 2399 | skdev->timer_countdown = SKD_TIMER_MINUTES(20); |
| 2400 | skd_quiesce_dev(skdev); |
| 2401 | break; |
| 2402 | |
| 2403 | case SKD_CHECK_STATUS_REQUEUE_REQUEST: |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 2404 | if ((unsigned long) ++skreq->req->special < SKD_MAX_RETRIES) { |
| 2405 | skd_log_skreq(skdev, skreq, "retry"); |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 2406 | blk_requeue_request(skdev->queue, skreq->req); |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 2407 | break; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2408 | } |
| 2409 | /* fall through to report error */ |
| 2410 | |
| 2411 | case SKD_CHECK_STATUS_REPORT_ERROR: |
| 2412 | default: |
| 2413 | skd_end_request(skdev, skreq, -EIO); |
| 2414 | break; |
| 2415 | } |
| 2416 | } |
| 2417 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2418 | /* assume spinlock is already held */ |
| 2419 | static void skd_release_skreq(struct skd_device *skdev, |
| 2420 | struct skd_request_context *skreq) |
| 2421 | { |
| 2422 | u32 msg_slot; |
| 2423 | struct skd_fitmsg_context *skmsg; |
| 2424 | |
| 2425 | u32 timo_slot; |
| 2426 | |
| 2427 | /* |
| 2428 | * Reclaim the FIT msg buffer if this is |
| 2429 | * the first of the requests it carried to |
| 2430 | * be completed. The FIT msg buffer used to |
| 2431 | * send this request cannot be reused until |
| 2432 | * we are sure the s1120 card has copied |
| 2433 | * it to its memory. The FIT msg might have |
| 2434 | * contained several requests. As soon as |
| 2435 | * any of them are completed we know that |
| 2436 | * the entire FIT msg was transferred. |
| 2437 | * Only the first completed request will |
| 2438 | * match the FIT msg buffer id. The FIT |
| 2439 | * msg buffer id is immediately updated. |
| 2440 | * When subsequent requests complete the FIT |
| 2441 | * msg buffer id won't match, so we know |
| 2442 | * quite cheaply that it is already done. |
| 2443 | */ |
| 2444 | msg_slot = skreq->fitmsg_id & SKD_ID_SLOT_MASK; |
| 2445 | SKD_ASSERT(msg_slot < skdev->num_fitmsg_context); |
| 2446 | |
| 2447 | skmsg = &skdev->skmsg_table[msg_slot]; |
| 2448 | if (skmsg->id == skreq->fitmsg_id) { |
| 2449 | SKD_ASSERT(skmsg->state == SKD_MSG_STATE_BUSY); |
| 2450 | SKD_ASSERT(skmsg->outstanding > 0); |
| 2451 | skmsg->outstanding--; |
| 2452 | if (skmsg->outstanding == 0) { |
| 2453 | skmsg->state = SKD_MSG_STATE_IDLE; |
| 2454 | skmsg->id += SKD_ID_INCR; |
| 2455 | skmsg->next = skdev->skmsg_free_list; |
| 2456 | skdev->skmsg_free_list = skmsg; |
| 2457 | } |
| 2458 | } |
| 2459 | |
| 2460 | /* |
| 2461 | * Decrease the number of active requests. |
| 2462 | * Also decrements the count in the timeout slot. |
| 2463 | */ |
| 2464 | SKD_ASSERT(skdev->in_flight > 0); |
| 2465 | skdev->in_flight -= 1; |
| 2466 | |
| 2467 | timo_slot = skreq->timeout_stamp & SKD_TIMEOUT_SLOT_MASK; |
| 2468 | SKD_ASSERT(skdev->timeout_slot[timo_slot] > 0); |
| 2469 | skdev->timeout_slot[timo_slot] -= 1; |
| 2470 | |
| 2471 | /* |
| 2472 | * Reset backpointer |
| 2473 | */ |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 2474 | skreq->req = NULL; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2475 | |
| 2476 | /* |
| 2477 | * Reclaim the skd_request_context |
| 2478 | */ |
| 2479 | skreq->state = SKD_REQ_STATE_IDLE; |
| 2480 | skreq->id += SKD_ID_INCR; |
| 2481 | skreq->next = skdev->skreq_free_list; |
| 2482 | skdev->skreq_free_list = skreq; |
| 2483 | } |
| 2484 | |
| 2485 | #define DRIVER_INQ_EVPD_PAGE_CODE 0xDA |
| 2486 | |
| 2487 | static void skd_do_inq_page_00(struct skd_device *skdev, |
| 2488 | volatile struct fit_completion_entry_v1 *skcomp, |
| 2489 | volatile struct fit_comp_error_info *skerr, |
| 2490 | uint8_t *cdb, uint8_t *buf) |
| 2491 | { |
| 2492 | uint16_t insert_pt, max_bytes, drive_pages, drive_bytes, new_size; |
| 2493 | |
| 2494 | /* Caller requested "supported pages". The driver needs to insert |
| 2495 | * its page. |
| 2496 | */ |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2497 | pr_debug("%s:%s:%d skd_do_driver_inquiry: modify supported pages.\n", |
| 2498 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2499 | |
| 2500 | /* If the device rejected the request because the CDB was |
| 2501 | * improperly formed, then just leave. |
| 2502 | */ |
| 2503 | if (skcomp->status == SAM_STAT_CHECK_CONDITION && |
| 2504 | skerr->key == ILLEGAL_REQUEST && skerr->code == 0x24) |
| 2505 | return; |
| 2506 | |
| 2507 | /* Get the amount of space the caller allocated */ |
| 2508 | max_bytes = (cdb[3] << 8) | cdb[4]; |
| 2509 | |
| 2510 | /* Get the number of pages actually returned by the device */ |
| 2511 | drive_pages = (buf[2] << 8) | buf[3]; |
| 2512 | drive_bytes = drive_pages + 4; |
| 2513 | new_size = drive_pages + 1; |
| 2514 | |
| 2515 | /* Supported pages must be in numerical order, so find where |
| 2516 | * the driver page needs to be inserted into the list of |
| 2517 | * pages returned by the device. |
| 2518 | */ |
| 2519 | for (insert_pt = 4; insert_pt < drive_bytes; insert_pt++) { |
| 2520 | if (buf[insert_pt] == DRIVER_INQ_EVPD_PAGE_CODE) |
| 2521 | return; /* Device using this page code. abort */ |
| 2522 | else if (buf[insert_pt] > DRIVER_INQ_EVPD_PAGE_CODE) |
| 2523 | break; |
| 2524 | } |
| 2525 | |
| 2526 | if (insert_pt < max_bytes) { |
| 2527 | uint16_t u; |
| 2528 | |
| 2529 | /* Shift everything up one byte to make room. */ |
| 2530 | for (u = new_size + 3; u > insert_pt; u--) |
| 2531 | buf[u] = buf[u - 1]; |
| 2532 | buf[insert_pt] = DRIVER_INQ_EVPD_PAGE_CODE; |
| 2533 | |
| 2534 | /* SCSI byte order increment of num_returned_bytes by 1 */ |
| 2535 | skcomp->num_returned_bytes = |
| 2536 | be32_to_cpu(skcomp->num_returned_bytes) + 1; |
| 2537 | skcomp->num_returned_bytes = |
| 2538 | be32_to_cpu(skcomp->num_returned_bytes); |
| 2539 | } |
| 2540 | |
| 2541 | /* update page length field to reflect the driver's page too */ |
| 2542 | buf[2] = (uint8_t)((new_size >> 8) & 0xFF); |
| 2543 | buf[3] = (uint8_t)((new_size >> 0) & 0xFF); |
| 2544 | } |
| 2545 | |
| 2546 | static void skd_get_link_info(struct pci_dev *pdev, u8 *speed, u8 *width) |
| 2547 | { |
| 2548 | int pcie_reg; |
| 2549 | u16 pci_bus_speed; |
| 2550 | u8 pci_lanes; |
| 2551 | |
| 2552 | pcie_reg = pci_find_capability(pdev, PCI_CAP_ID_EXP); |
| 2553 | if (pcie_reg) { |
| 2554 | u16 linksta; |
| 2555 | pci_read_config_word(pdev, pcie_reg + PCI_EXP_LNKSTA, &linksta); |
| 2556 | |
| 2557 | pci_bus_speed = linksta & 0xF; |
| 2558 | pci_lanes = (linksta & 0x3F0) >> 4; |
| 2559 | } else { |
| 2560 | *speed = STEC_LINK_UNKNOWN; |
| 2561 | *width = 0xFF; |
| 2562 | return; |
| 2563 | } |
| 2564 | |
| 2565 | switch (pci_bus_speed) { |
| 2566 | case 1: |
| 2567 | *speed = STEC_LINK_2_5GTS; |
| 2568 | break; |
| 2569 | case 2: |
| 2570 | *speed = STEC_LINK_5GTS; |
| 2571 | break; |
| 2572 | case 3: |
| 2573 | *speed = STEC_LINK_8GTS; |
| 2574 | break; |
| 2575 | default: |
| 2576 | *speed = STEC_LINK_UNKNOWN; |
| 2577 | break; |
| 2578 | } |
| 2579 | |
| 2580 | if (pci_lanes <= 0x20) |
| 2581 | *width = pci_lanes; |
| 2582 | else |
| 2583 | *width = 0xFF; |
| 2584 | } |
| 2585 | |
| 2586 | static void skd_do_inq_page_da(struct skd_device *skdev, |
| 2587 | volatile struct fit_completion_entry_v1 *skcomp, |
| 2588 | volatile struct fit_comp_error_info *skerr, |
| 2589 | uint8_t *cdb, uint8_t *buf) |
| 2590 | { |
Bartlomiej Zolnierkiewicz | fec23f6 | 2013-11-05 12:37:07 +0100 | [diff] [blame] | 2591 | struct pci_dev *pdev = skdev->pdev; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2592 | unsigned max_bytes; |
| 2593 | struct driver_inquiry_data inq; |
| 2594 | u16 val; |
| 2595 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2596 | pr_debug("%s:%s:%d skd_do_driver_inquiry: return driver page\n", |
| 2597 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2598 | |
| 2599 | memset(&inq, 0, sizeof(inq)); |
| 2600 | |
| 2601 | inq.page_code = DRIVER_INQ_EVPD_PAGE_CODE; |
| 2602 | |
Bartlomiej Zolnierkiewicz | fec23f6 | 2013-11-05 12:37:07 +0100 | [diff] [blame] | 2603 | skd_get_link_info(pdev, &inq.pcie_link_speed, &inq.pcie_link_lanes); |
| 2604 | inq.pcie_bus_number = cpu_to_be16(pdev->bus->number); |
| 2605 | inq.pcie_device_number = PCI_SLOT(pdev->devfn); |
| 2606 | inq.pcie_function_number = PCI_FUNC(pdev->devfn); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2607 | |
Bartlomiej Zolnierkiewicz | fec23f6 | 2013-11-05 12:37:07 +0100 | [diff] [blame] | 2608 | pci_read_config_word(pdev, PCI_VENDOR_ID, &val); |
| 2609 | inq.pcie_vendor_id = cpu_to_be16(val); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2610 | |
Bartlomiej Zolnierkiewicz | fec23f6 | 2013-11-05 12:37:07 +0100 | [diff] [blame] | 2611 | pci_read_config_word(pdev, PCI_DEVICE_ID, &val); |
| 2612 | inq.pcie_device_id = cpu_to_be16(val); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2613 | |
Bartlomiej Zolnierkiewicz | fec23f6 | 2013-11-05 12:37:07 +0100 | [diff] [blame] | 2614 | pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &val); |
| 2615 | inq.pcie_subsystem_vendor_id = cpu_to_be16(val); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2616 | |
Bartlomiej Zolnierkiewicz | fec23f6 | 2013-11-05 12:37:07 +0100 | [diff] [blame] | 2617 | pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &val); |
| 2618 | inq.pcie_subsystem_device_id = cpu_to_be16(val); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2619 | |
| 2620 | /* Driver version, fixed lenth, padded with spaces on the right */ |
| 2621 | inq.driver_version_length = sizeof(inq.driver_version); |
| 2622 | memset(&inq.driver_version, ' ', sizeof(inq.driver_version)); |
| 2623 | memcpy(inq.driver_version, DRV_VER_COMPL, |
| 2624 | min(sizeof(inq.driver_version), strlen(DRV_VER_COMPL))); |
| 2625 | |
| 2626 | inq.page_length = cpu_to_be16((sizeof(inq) - 4)); |
| 2627 | |
| 2628 | /* Clear the error set by the device */ |
| 2629 | skcomp->status = SAM_STAT_GOOD; |
| 2630 | memset((void *)skerr, 0, sizeof(*skerr)); |
| 2631 | |
| 2632 | /* copy response into output buffer */ |
| 2633 | max_bytes = (cdb[3] << 8) | cdb[4]; |
| 2634 | memcpy(buf, &inq, min_t(unsigned, max_bytes, sizeof(inq))); |
| 2635 | |
| 2636 | skcomp->num_returned_bytes = |
| 2637 | be32_to_cpu(min_t(uint16_t, max_bytes, sizeof(inq))); |
| 2638 | } |
| 2639 | |
| 2640 | static void skd_do_driver_inq(struct skd_device *skdev, |
| 2641 | volatile struct fit_completion_entry_v1 *skcomp, |
| 2642 | volatile struct fit_comp_error_info *skerr, |
| 2643 | uint8_t *cdb, uint8_t *buf) |
| 2644 | { |
| 2645 | if (!buf) |
| 2646 | return; |
| 2647 | else if (cdb[0] != INQUIRY) |
| 2648 | return; /* Not an INQUIRY */ |
| 2649 | else if ((cdb[1] & 1) == 0) |
| 2650 | return; /* EVPD not set */ |
| 2651 | else if (cdb[2] == 0) |
| 2652 | /* Need to add driver's page to supported pages list */ |
| 2653 | skd_do_inq_page_00(skdev, skcomp, skerr, cdb, buf); |
| 2654 | else if (cdb[2] == DRIVER_INQ_EVPD_PAGE_CODE) |
| 2655 | /* Caller requested driver's page */ |
| 2656 | skd_do_inq_page_da(skdev, skcomp, skerr, cdb, buf); |
| 2657 | } |
| 2658 | |
| 2659 | static unsigned char *skd_sg_1st_page_ptr(struct scatterlist *sg) |
| 2660 | { |
| 2661 | if (!sg) |
| 2662 | return NULL; |
| 2663 | if (!sg_page(sg)) |
| 2664 | return NULL; |
| 2665 | return sg_virt(sg); |
| 2666 | } |
| 2667 | |
| 2668 | static void skd_process_scsi_inq(struct skd_device *skdev, |
| 2669 | volatile struct fit_completion_entry_v1 |
| 2670 | *skcomp, |
| 2671 | volatile struct fit_comp_error_info *skerr, |
| 2672 | struct skd_special_context *skspcl) |
| 2673 | { |
| 2674 | uint8_t *buf; |
| 2675 | struct fit_msg_hdr *fmh = (struct fit_msg_hdr *)skspcl->msg_buf; |
| 2676 | struct skd_scsi_request *scsi_req = (struct skd_scsi_request *)&fmh[1]; |
| 2677 | |
| 2678 | dma_sync_sg_for_cpu(skdev->class_dev, skspcl->req.sg, skspcl->req.n_sg, |
| 2679 | skspcl->req.sg_data_dir); |
| 2680 | buf = skd_sg_1st_page_ptr(skspcl->req.sg); |
| 2681 | |
| 2682 | if (buf) |
| 2683 | skd_do_driver_inq(skdev, skcomp, skerr, scsi_req->cdb, buf); |
| 2684 | } |
| 2685 | |
| 2686 | |
| 2687 | static int skd_isr_completion_posted(struct skd_device *skdev, |
| 2688 | int limit, int *enqueued) |
| 2689 | { |
| 2690 | volatile struct fit_completion_entry_v1 *skcmp = NULL; |
| 2691 | volatile struct fit_comp_error_info *skerr; |
| 2692 | u16 req_id; |
| 2693 | u32 req_slot; |
| 2694 | struct skd_request_context *skreq; |
| 2695 | u16 cmp_cntxt = 0; |
| 2696 | u8 cmp_status = 0; |
| 2697 | u8 cmp_cycle = 0; |
| 2698 | u32 cmp_bytes = 0; |
| 2699 | int rc = 0; |
| 2700 | int processed = 0; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2701 | |
| 2702 | for (;; ) { |
| 2703 | SKD_ASSERT(skdev->skcomp_ix < SKD_N_COMPLETION_ENTRY); |
| 2704 | |
| 2705 | skcmp = &skdev->skcomp_table[skdev->skcomp_ix]; |
| 2706 | cmp_cycle = skcmp->cycle; |
| 2707 | cmp_cntxt = skcmp->tag; |
| 2708 | cmp_status = skcmp->status; |
| 2709 | cmp_bytes = be32_to_cpu(skcmp->num_returned_bytes); |
| 2710 | |
| 2711 | skerr = &skdev->skerr_table[skdev->skcomp_ix]; |
| 2712 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2713 | pr_debug("%s:%s:%d " |
| 2714 | "cycle=%d ix=%d got cycle=%d cmdctxt=0x%x stat=%d " |
| 2715 | "busy=%d rbytes=0x%x proto=%d\n", |
| 2716 | skdev->name, __func__, __LINE__, skdev->skcomp_cycle, |
| 2717 | skdev->skcomp_ix, cmp_cycle, cmp_cntxt, cmp_status, |
| 2718 | skdev->in_flight, cmp_bytes, skdev->proto_ver); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2719 | |
| 2720 | if (cmp_cycle != skdev->skcomp_cycle) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2721 | pr_debug("%s:%s:%d end of completions\n", |
| 2722 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2723 | break; |
| 2724 | } |
| 2725 | /* |
| 2726 | * Update the completion queue head index and possibly |
| 2727 | * the completion cycle count. 8-bit wrap-around. |
| 2728 | */ |
| 2729 | skdev->skcomp_ix++; |
| 2730 | if (skdev->skcomp_ix >= SKD_N_COMPLETION_ENTRY) { |
| 2731 | skdev->skcomp_ix = 0; |
| 2732 | skdev->skcomp_cycle++; |
| 2733 | } |
| 2734 | |
| 2735 | /* |
| 2736 | * The command context is a unique 32-bit ID. The low order |
| 2737 | * bits help locate the request. The request is usually a |
| 2738 | * r/w request (see skd_start() above) or a special request. |
| 2739 | */ |
| 2740 | req_id = cmp_cntxt; |
| 2741 | req_slot = req_id & SKD_ID_SLOT_AND_TABLE_MASK; |
| 2742 | |
| 2743 | /* Is this other than a r/w request? */ |
| 2744 | if (req_slot >= skdev->num_req_context) { |
| 2745 | /* |
| 2746 | * This is not a completion for a r/w request. |
| 2747 | */ |
| 2748 | skd_complete_other(skdev, skcmp, skerr); |
| 2749 | continue; |
| 2750 | } |
| 2751 | |
| 2752 | skreq = &skdev->skreq_table[req_slot]; |
| 2753 | |
| 2754 | /* |
| 2755 | * Make sure the request ID for the slot matches. |
| 2756 | */ |
| 2757 | if (skreq->id != req_id) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2758 | pr_debug("%s:%s:%d mismatch comp_id=0x%x req_id=0x%x\n", |
| 2759 | skdev->name, __func__, __LINE__, |
| 2760 | req_id, skreq->id); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2761 | { |
| 2762 | u16 new_id = cmp_cntxt; |
| 2763 | pr_err("(%s): Completion mismatch " |
| 2764 | "comp_id=0x%04x skreq=0x%04x new=0x%04x\n", |
| 2765 | skd_name(skdev), req_id, |
| 2766 | skreq->id, new_id); |
| 2767 | |
| 2768 | continue; |
| 2769 | } |
| 2770 | } |
| 2771 | |
| 2772 | SKD_ASSERT(skreq->state == SKD_REQ_STATE_BUSY); |
| 2773 | |
| 2774 | if (skreq->state == SKD_REQ_STATE_ABORTED) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2775 | pr_debug("%s:%s:%d reclaim req %p id=%04x\n", |
| 2776 | skdev->name, __func__, __LINE__, |
| 2777 | skreq, skreq->id); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2778 | /* a previously timed out command can |
| 2779 | * now be cleaned up */ |
| 2780 | skd_release_skreq(skdev, skreq); |
| 2781 | continue; |
| 2782 | } |
| 2783 | |
| 2784 | skreq->completion = *skcmp; |
| 2785 | if (unlikely(cmp_status == SAM_STAT_CHECK_CONDITION)) { |
| 2786 | skreq->err_info = *skerr; |
| 2787 | skd_log_check_status(skdev, cmp_status, skerr->key, |
| 2788 | skerr->code, skerr->qual, |
| 2789 | skerr->fruc); |
| 2790 | } |
| 2791 | /* Release DMA resources for the request. */ |
| 2792 | if (skreq->n_sg > 0) |
| 2793 | skd_postop_sg_list(skdev, skreq); |
| 2794 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 2795 | if (!skreq->req) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2796 | pr_debug("%s:%s:%d NULL backptr skdreq %p, " |
| 2797 | "req=0x%x req_id=0x%x\n", |
| 2798 | skdev->name, __func__, __LINE__, |
| 2799 | skreq, skreq->id, req_id); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2800 | } else { |
| 2801 | /* |
| 2802 | * Capture the outcome and post it back to the |
| 2803 | * native request. |
| 2804 | */ |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 2805 | if (likely(cmp_status == SAM_STAT_GOOD)) |
| 2806 | skd_end_request(skdev, skreq, 0); |
| 2807 | else |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2808 | skd_resolve_req_exception(skdev, skreq); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2809 | } |
| 2810 | |
| 2811 | /* |
| 2812 | * Release the skreq, its FIT msg (if one), timeout slot, |
| 2813 | * and queue depth. |
| 2814 | */ |
| 2815 | skd_release_skreq(skdev, skreq); |
| 2816 | |
| 2817 | /* skd_isr_comp_limit equal zero means no limit */ |
| 2818 | if (limit) { |
| 2819 | if (++processed >= limit) { |
| 2820 | rc = 1; |
| 2821 | break; |
| 2822 | } |
| 2823 | } |
| 2824 | } |
| 2825 | |
| 2826 | if ((skdev->state == SKD_DRVR_STATE_PAUSING) |
| 2827 | && (skdev->in_flight) == 0) { |
| 2828 | skdev->state = SKD_DRVR_STATE_PAUSED; |
| 2829 | wake_up_interruptible(&skdev->waitq); |
| 2830 | } |
| 2831 | |
| 2832 | return rc; |
| 2833 | } |
| 2834 | |
| 2835 | static void skd_complete_other(struct skd_device *skdev, |
| 2836 | volatile struct fit_completion_entry_v1 *skcomp, |
| 2837 | volatile struct fit_comp_error_info *skerr) |
| 2838 | { |
| 2839 | u32 req_id = 0; |
| 2840 | u32 req_table; |
| 2841 | u32 req_slot; |
| 2842 | struct skd_special_context *skspcl; |
| 2843 | |
| 2844 | req_id = skcomp->tag; |
| 2845 | req_table = req_id & SKD_ID_TABLE_MASK; |
| 2846 | req_slot = req_id & SKD_ID_SLOT_MASK; |
| 2847 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2848 | pr_debug("%s:%s:%d table=0x%x id=0x%x slot=%d\n", |
| 2849 | skdev->name, __func__, __LINE__, |
| 2850 | req_table, req_id, req_slot); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2851 | |
| 2852 | /* |
| 2853 | * Based on the request id, determine how to dispatch this completion. |
| 2854 | * This swich/case is finding the good cases and forwarding the |
| 2855 | * completion entry. Errors are reported below the switch. |
| 2856 | */ |
| 2857 | switch (req_table) { |
| 2858 | case SKD_ID_RW_REQUEST: |
| 2859 | /* |
| 2860 | * The caller, skd_completion_posted_isr() above, |
| 2861 | * handles r/w requests. The only way we get here |
| 2862 | * is if the req_slot is out of bounds. |
| 2863 | */ |
| 2864 | break; |
| 2865 | |
| 2866 | case SKD_ID_SPECIAL_REQUEST: |
| 2867 | /* |
| 2868 | * Make sure the req_slot is in bounds and that the id |
| 2869 | * matches. |
| 2870 | */ |
| 2871 | if (req_slot < skdev->n_special) { |
| 2872 | skspcl = &skdev->skspcl_table[req_slot]; |
| 2873 | if (skspcl->req.id == req_id && |
| 2874 | skspcl->req.state == SKD_REQ_STATE_BUSY) { |
| 2875 | skd_complete_special(skdev, |
| 2876 | skcomp, skerr, skspcl); |
| 2877 | return; |
| 2878 | } |
| 2879 | } |
| 2880 | break; |
| 2881 | |
| 2882 | case SKD_ID_INTERNAL: |
| 2883 | if (req_slot == 0) { |
| 2884 | skspcl = &skdev->internal_skspcl; |
| 2885 | if (skspcl->req.id == req_id && |
| 2886 | skspcl->req.state == SKD_REQ_STATE_BUSY) { |
| 2887 | skd_complete_internal(skdev, |
| 2888 | skcomp, skerr, skspcl); |
| 2889 | return; |
| 2890 | } |
| 2891 | } |
| 2892 | break; |
| 2893 | |
| 2894 | case SKD_ID_FIT_MSG: |
| 2895 | /* |
| 2896 | * These id's should never appear in a completion record. |
| 2897 | */ |
| 2898 | break; |
| 2899 | |
| 2900 | default: |
| 2901 | /* |
| 2902 | * These id's should never appear anywhere; |
| 2903 | */ |
| 2904 | break; |
| 2905 | } |
| 2906 | |
| 2907 | /* |
| 2908 | * If we get here it is a bad or stale id. |
| 2909 | */ |
| 2910 | } |
| 2911 | |
| 2912 | static void skd_complete_special(struct skd_device *skdev, |
| 2913 | volatile struct fit_completion_entry_v1 |
| 2914 | *skcomp, |
| 2915 | volatile struct fit_comp_error_info *skerr, |
| 2916 | struct skd_special_context *skspcl) |
| 2917 | { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2918 | pr_debug("%s:%s:%d completing special request %p\n", |
| 2919 | skdev->name, __func__, __LINE__, skspcl); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2920 | if (skspcl->orphaned) { |
| 2921 | /* Discard orphaned request */ |
| 2922 | /* ?: Can this release directly or does it need |
| 2923 | * to use a worker? */ |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2924 | pr_debug("%s:%s:%d release orphaned %p\n", |
| 2925 | skdev->name, __func__, __LINE__, skspcl); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2926 | skd_release_special(skdev, skspcl); |
| 2927 | return; |
| 2928 | } |
| 2929 | |
| 2930 | skd_process_scsi_inq(skdev, skcomp, skerr, skspcl); |
| 2931 | |
| 2932 | skspcl->req.state = SKD_REQ_STATE_COMPLETED; |
| 2933 | skspcl->req.completion = *skcomp; |
| 2934 | skspcl->req.err_info = *skerr; |
| 2935 | |
| 2936 | skd_log_check_status(skdev, skspcl->req.completion.status, skerr->key, |
| 2937 | skerr->code, skerr->qual, skerr->fruc); |
| 2938 | |
| 2939 | wake_up_interruptible(&skdev->waitq); |
| 2940 | } |
| 2941 | |
| 2942 | /* assume spinlock is already held */ |
| 2943 | static void skd_release_special(struct skd_device *skdev, |
| 2944 | struct skd_special_context *skspcl) |
| 2945 | { |
| 2946 | int i, was_depleted; |
| 2947 | |
| 2948 | for (i = 0; i < skspcl->req.n_sg; i++) { |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2949 | struct page *page = sg_page(&skspcl->req.sg[i]); |
| 2950 | __free_page(page); |
| 2951 | } |
| 2952 | |
| 2953 | was_depleted = (skdev->skspcl_free_list == NULL); |
| 2954 | |
| 2955 | skspcl->req.state = SKD_REQ_STATE_IDLE; |
| 2956 | skspcl->req.id += SKD_ID_INCR; |
| 2957 | skspcl->req.next = |
| 2958 | (struct skd_request_context *)skdev->skspcl_free_list; |
| 2959 | skdev->skspcl_free_list = (struct skd_special_context *)skspcl; |
| 2960 | |
| 2961 | if (was_depleted) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 2962 | pr_debug("%s:%s:%d skspcl was depleted\n", |
| 2963 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 2964 | /* Free list was depleted. Their might be waiters. */ |
| 2965 | wake_up_interruptible(&skdev->waitq); |
| 2966 | } |
| 2967 | } |
| 2968 | |
| 2969 | static void skd_reset_skcomp(struct skd_device *skdev) |
| 2970 | { |
| 2971 | u32 nbytes; |
| 2972 | struct fit_completion_entry_v1 *skcomp; |
| 2973 | |
| 2974 | nbytes = sizeof(*skcomp) * SKD_N_COMPLETION_ENTRY; |
| 2975 | nbytes += sizeof(struct fit_comp_error_info) * SKD_N_COMPLETION_ENTRY; |
| 2976 | |
| 2977 | memset(skdev->skcomp_table, 0, nbytes); |
| 2978 | |
| 2979 | skdev->skcomp_ix = 0; |
| 2980 | skdev->skcomp_cycle = 1; |
| 2981 | } |
| 2982 | |
| 2983 | /* |
| 2984 | ***************************************************************************** |
| 2985 | * INTERRUPTS |
| 2986 | ***************************************************************************** |
| 2987 | */ |
| 2988 | static void skd_completion_worker(struct work_struct *work) |
| 2989 | { |
| 2990 | struct skd_device *skdev = |
| 2991 | container_of(work, struct skd_device, completion_worker); |
| 2992 | unsigned long flags; |
| 2993 | int flush_enqueued = 0; |
| 2994 | |
| 2995 | spin_lock_irqsave(&skdev->lock, flags); |
| 2996 | |
| 2997 | /* |
| 2998 | * pass in limit=0, which means no limit.. |
| 2999 | * process everything in compq |
| 3000 | */ |
| 3001 | skd_isr_completion_posted(skdev, 0, &flush_enqueued); |
| 3002 | skd_request_fn(skdev->queue); |
| 3003 | |
| 3004 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 3005 | } |
| 3006 | |
| 3007 | static void skd_isr_msg_from_dev(struct skd_device *skdev); |
| 3008 | |
| 3009 | irqreturn_t |
| 3010 | static skd_isr(int irq, void *ptr) |
| 3011 | { |
| 3012 | struct skd_device *skdev; |
| 3013 | u32 intstat; |
| 3014 | u32 ack; |
| 3015 | int rc = 0; |
| 3016 | int deferred = 0; |
| 3017 | int flush_enqueued = 0; |
| 3018 | |
| 3019 | skdev = (struct skd_device *)ptr; |
| 3020 | spin_lock(&skdev->lock); |
| 3021 | |
| 3022 | for (;; ) { |
| 3023 | intstat = SKD_READL(skdev, FIT_INT_STATUS_HOST); |
| 3024 | |
| 3025 | ack = FIT_INT_DEF_MASK; |
| 3026 | ack &= intstat; |
| 3027 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3028 | pr_debug("%s:%s:%d intstat=0x%x ack=0x%x\n", |
| 3029 | skdev->name, __func__, __LINE__, intstat, ack); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3030 | |
| 3031 | /* As long as there is an int pending on device, keep |
| 3032 | * running loop. When none, get out, but if we've never |
| 3033 | * done any processing, call completion handler? |
| 3034 | */ |
| 3035 | if (ack == 0) { |
| 3036 | /* No interrupts on device, but run the completion |
| 3037 | * processor anyway? |
| 3038 | */ |
| 3039 | if (rc == 0) |
| 3040 | if (likely (skdev->state |
| 3041 | == SKD_DRVR_STATE_ONLINE)) |
| 3042 | deferred = 1; |
| 3043 | break; |
| 3044 | } |
| 3045 | |
| 3046 | rc = IRQ_HANDLED; |
| 3047 | |
| 3048 | SKD_WRITEL(skdev, ack, FIT_INT_STATUS_HOST); |
| 3049 | |
| 3050 | if (likely((skdev->state != SKD_DRVR_STATE_LOAD) && |
| 3051 | (skdev->state != SKD_DRVR_STATE_STOPPING))) { |
| 3052 | if (intstat & FIT_ISH_COMPLETION_POSTED) { |
| 3053 | /* |
| 3054 | * If we have already deferred completion |
| 3055 | * processing, don't bother running it again |
| 3056 | */ |
| 3057 | if (deferred == 0) |
| 3058 | deferred = |
| 3059 | skd_isr_completion_posted(skdev, |
| 3060 | skd_isr_comp_limit, &flush_enqueued); |
| 3061 | } |
| 3062 | |
| 3063 | if (intstat & FIT_ISH_FW_STATE_CHANGE) { |
| 3064 | skd_isr_fwstate(skdev); |
| 3065 | if (skdev->state == SKD_DRVR_STATE_FAULT || |
| 3066 | skdev->state == |
| 3067 | SKD_DRVR_STATE_DISAPPEARED) { |
| 3068 | spin_unlock(&skdev->lock); |
| 3069 | return rc; |
| 3070 | } |
| 3071 | } |
| 3072 | |
| 3073 | if (intstat & FIT_ISH_MSG_FROM_DEV) |
| 3074 | skd_isr_msg_from_dev(skdev); |
| 3075 | } |
| 3076 | } |
| 3077 | |
| 3078 | if (unlikely(flush_enqueued)) |
| 3079 | skd_request_fn(skdev->queue); |
| 3080 | |
| 3081 | if (deferred) |
| 3082 | schedule_work(&skdev->completion_worker); |
| 3083 | else if (!flush_enqueued) |
| 3084 | skd_request_fn(skdev->queue); |
| 3085 | |
| 3086 | spin_unlock(&skdev->lock); |
| 3087 | |
| 3088 | return rc; |
| 3089 | } |
| 3090 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3091 | static void skd_drive_fault(struct skd_device *skdev) |
| 3092 | { |
| 3093 | skdev->state = SKD_DRVR_STATE_FAULT; |
| 3094 | pr_err("(%s): Drive FAULT\n", skd_name(skdev)); |
| 3095 | } |
| 3096 | |
| 3097 | static void skd_drive_disappeared(struct skd_device *skdev) |
| 3098 | { |
| 3099 | skdev->state = SKD_DRVR_STATE_DISAPPEARED; |
| 3100 | pr_err("(%s): Drive DISAPPEARED\n", skd_name(skdev)); |
| 3101 | } |
| 3102 | |
| 3103 | static void skd_isr_fwstate(struct skd_device *skdev) |
| 3104 | { |
| 3105 | u32 sense; |
| 3106 | u32 state; |
| 3107 | u32 mtd; |
| 3108 | int prev_driver_state = skdev->state; |
| 3109 | |
| 3110 | sense = SKD_READL(skdev, FIT_STATUS); |
| 3111 | state = sense & FIT_SR_DRIVE_STATE_MASK; |
| 3112 | |
| 3113 | pr_err("(%s): s1120 state %s(%d)=>%s(%d)\n", |
| 3114 | skd_name(skdev), |
| 3115 | skd_drive_state_to_str(skdev->drive_state), skdev->drive_state, |
| 3116 | skd_drive_state_to_str(state), state); |
| 3117 | |
| 3118 | skdev->drive_state = state; |
| 3119 | |
| 3120 | switch (skdev->drive_state) { |
| 3121 | case FIT_SR_DRIVE_INIT: |
| 3122 | if (skdev->state == SKD_DRVR_STATE_PROTOCOL_MISMATCH) { |
| 3123 | skd_disable_interrupts(skdev); |
| 3124 | break; |
| 3125 | } |
| 3126 | if (skdev->state == SKD_DRVR_STATE_RESTARTING) |
| 3127 | skd_recover_requests(skdev, 0); |
| 3128 | if (skdev->state == SKD_DRVR_STATE_WAIT_BOOT) { |
| 3129 | skdev->timer_countdown = SKD_STARTING_TIMO; |
| 3130 | skdev->state = SKD_DRVR_STATE_STARTING; |
| 3131 | skd_soft_reset(skdev); |
| 3132 | break; |
| 3133 | } |
| 3134 | mtd = FIT_MXD_CONS(FIT_MTD_FITFW_INIT, 0, 0); |
| 3135 | SKD_WRITEL(skdev, mtd, FIT_MSG_TO_DEVICE); |
| 3136 | skdev->last_mtd = mtd; |
| 3137 | break; |
| 3138 | |
| 3139 | case FIT_SR_DRIVE_ONLINE: |
| 3140 | skdev->cur_max_queue_depth = skd_max_queue_depth; |
| 3141 | if (skdev->cur_max_queue_depth > skdev->dev_max_queue_depth) |
| 3142 | skdev->cur_max_queue_depth = skdev->dev_max_queue_depth; |
| 3143 | |
| 3144 | skdev->queue_low_water_mark = |
| 3145 | skdev->cur_max_queue_depth * 2 / 3 + 1; |
| 3146 | if (skdev->queue_low_water_mark < 1) |
| 3147 | skdev->queue_low_water_mark = 1; |
| 3148 | pr_info( |
| 3149 | "(%s): Queue depth limit=%d dev=%d lowat=%d\n", |
| 3150 | skd_name(skdev), |
| 3151 | skdev->cur_max_queue_depth, |
| 3152 | skdev->dev_max_queue_depth, skdev->queue_low_water_mark); |
| 3153 | |
| 3154 | skd_refresh_device_data(skdev); |
| 3155 | break; |
| 3156 | |
| 3157 | case FIT_SR_DRIVE_BUSY: |
| 3158 | skdev->state = SKD_DRVR_STATE_BUSY; |
| 3159 | skdev->timer_countdown = SKD_BUSY_TIMO; |
| 3160 | skd_quiesce_dev(skdev); |
| 3161 | break; |
| 3162 | case FIT_SR_DRIVE_BUSY_SANITIZE: |
| 3163 | /* set timer for 3 seconds, we'll abort any unfinished |
| 3164 | * commands after that expires |
| 3165 | */ |
| 3166 | skdev->state = SKD_DRVR_STATE_BUSY_SANITIZE; |
| 3167 | skdev->timer_countdown = SKD_TIMER_SECONDS(3); |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 3168 | blk_start_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3169 | break; |
| 3170 | case FIT_SR_DRIVE_BUSY_ERASE: |
| 3171 | skdev->state = SKD_DRVR_STATE_BUSY_ERASE; |
| 3172 | skdev->timer_countdown = SKD_BUSY_TIMO; |
| 3173 | break; |
| 3174 | case FIT_SR_DRIVE_OFFLINE: |
| 3175 | skdev->state = SKD_DRVR_STATE_IDLE; |
| 3176 | break; |
| 3177 | case FIT_SR_DRIVE_SOFT_RESET: |
| 3178 | switch (skdev->state) { |
| 3179 | case SKD_DRVR_STATE_STARTING: |
| 3180 | case SKD_DRVR_STATE_RESTARTING: |
| 3181 | /* Expected by a caller of skd_soft_reset() */ |
| 3182 | break; |
| 3183 | default: |
| 3184 | skdev->state = SKD_DRVR_STATE_RESTARTING; |
| 3185 | break; |
| 3186 | } |
| 3187 | break; |
| 3188 | case FIT_SR_DRIVE_FW_BOOTING: |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3189 | pr_debug("%s:%s:%d ISR FIT_SR_DRIVE_FW_BOOTING %s\n", |
| 3190 | skdev->name, __func__, __LINE__, skdev->name); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3191 | skdev->state = SKD_DRVR_STATE_WAIT_BOOT; |
| 3192 | skdev->timer_countdown = SKD_WAIT_BOOT_TIMO; |
| 3193 | break; |
| 3194 | |
| 3195 | case FIT_SR_DRIVE_DEGRADED: |
| 3196 | case FIT_SR_PCIE_LINK_DOWN: |
| 3197 | case FIT_SR_DRIVE_NEED_FW_DOWNLOAD: |
| 3198 | break; |
| 3199 | |
| 3200 | case FIT_SR_DRIVE_FAULT: |
| 3201 | skd_drive_fault(skdev); |
| 3202 | skd_recover_requests(skdev, 0); |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 3203 | blk_start_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3204 | break; |
| 3205 | |
| 3206 | /* PCIe bus returned all Fs? */ |
| 3207 | case 0xFF: |
| 3208 | pr_info("(%s): state=0x%x sense=0x%x\n", |
| 3209 | skd_name(skdev), state, sense); |
| 3210 | skd_drive_disappeared(skdev); |
| 3211 | skd_recover_requests(skdev, 0); |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 3212 | blk_start_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3213 | break; |
| 3214 | default: |
| 3215 | /* |
| 3216 | * Uknown FW State. Wait for a state we recognize. |
| 3217 | */ |
| 3218 | break; |
| 3219 | } |
| 3220 | pr_err("(%s): Driver state %s(%d)=>%s(%d)\n", |
| 3221 | skd_name(skdev), |
| 3222 | skd_skdev_state_to_str(prev_driver_state), prev_driver_state, |
| 3223 | skd_skdev_state_to_str(skdev->state), skdev->state); |
| 3224 | } |
| 3225 | |
| 3226 | static void skd_recover_requests(struct skd_device *skdev, int requeue) |
| 3227 | { |
| 3228 | int i; |
| 3229 | |
| 3230 | for (i = 0; i < skdev->num_req_context; i++) { |
| 3231 | struct skd_request_context *skreq = &skdev->skreq_table[i]; |
| 3232 | |
| 3233 | if (skreq->state == SKD_REQ_STATE_BUSY) { |
| 3234 | skd_log_skreq(skdev, skreq, "recover"); |
| 3235 | |
| 3236 | SKD_ASSERT((skreq->id & SKD_ID_INCR) != 0); |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 3237 | SKD_ASSERT(skreq->req != NULL); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3238 | |
| 3239 | /* Release DMA resources for the request. */ |
| 3240 | if (skreq->n_sg > 0) |
| 3241 | skd_postop_sg_list(skdev, skreq); |
| 3242 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 3243 | if (requeue && |
| 3244 | (unsigned long) ++skreq->req->special < |
| 3245 | SKD_MAX_RETRIES) |
Mike Snitzer | 38d4a1b | 2013-11-01 15:05:10 -0400 | [diff] [blame] | 3246 | blk_requeue_request(skdev->queue, skreq->req); |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 3247 | else |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3248 | skd_end_request(skdev, skreq, -EIO); |
| 3249 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 3250 | skreq->req = NULL; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3251 | |
| 3252 | skreq->state = SKD_REQ_STATE_IDLE; |
| 3253 | skreq->id += SKD_ID_INCR; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3254 | } |
| 3255 | if (i > 0) |
| 3256 | skreq[-1].next = skreq; |
| 3257 | skreq->next = NULL; |
| 3258 | } |
| 3259 | skdev->skreq_free_list = skdev->skreq_table; |
| 3260 | |
| 3261 | for (i = 0; i < skdev->num_fitmsg_context; i++) { |
| 3262 | struct skd_fitmsg_context *skmsg = &skdev->skmsg_table[i]; |
| 3263 | |
| 3264 | if (skmsg->state == SKD_MSG_STATE_BUSY) { |
| 3265 | skd_log_skmsg(skdev, skmsg, "salvaged"); |
| 3266 | SKD_ASSERT((skmsg->id & SKD_ID_INCR) != 0); |
| 3267 | skmsg->state = SKD_MSG_STATE_IDLE; |
| 3268 | skmsg->id += SKD_ID_INCR; |
| 3269 | } |
| 3270 | if (i > 0) |
| 3271 | skmsg[-1].next = skmsg; |
| 3272 | skmsg->next = NULL; |
| 3273 | } |
| 3274 | skdev->skmsg_free_list = skdev->skmsg_table; |
| 3275 | |
| 3276 | for (i = 0; i < skdev->n_special; i++) { |
| 3277 | struct skd_special_context *skspcl = &skdev->skspcl_table[i]; |
| 3278 | |
| 3279 | /* If orphaned, reclaim it because it has already been reported |
| 3280 | * to the process as an error (it was just waiting for |
| 3281 | * a completion that didn't come, and now it will never come) |
| 3282 | * If busy, change to a state that will cause it to error |
| 3283 | * out in the wait routine and let it do the normal |
| 3284 | * reporting and reclaiming |
| 3285 | */ |
| 3286 | if (skspcl->req.state == SKD_REQ_STATE_BUSY) { |
| 3287 | if (skspcl->orphaned) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3288 | pr_debug("%s:%s:%d orphaned %p\n", |
| 3289 | skdev->name, __func__, __LINE__, |
| 3290 | skspcl); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3291 | skd_release_special(skdev, skspcl); |
| 3292 | } else { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3293 | pr_debug("%s:%s:%d not orphaned %p\n", |
| 3294 | skdev->name, __func__, __LINE__, |
| 3295 | skspcl); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3296 | skspcl->req.state = SKD_REQ_STATE_ABORTED; |
| 3297 | } |
| 3298 | } |
| 3299 | } |
| 3300 | skdev->skspcl_free_list = skdev->skspcl_table; |
| 3301 | |
| 3302 | for (i = 0; i < SKD_N_TIMEOUT_SLOT; i++) |
| 3303 | skdev->timeout_slot[i] = 0; |
| 3304 | |
| 3305 | skdev->in_flight = 0; |
| 3306 | } |
| 3307 | |
| 3308 | static void skd_isr_msg_from_dev(struct skd_device *skdev) |
| 3309 | { |
| 3310 | u32 mfd; |
| 3311 | u32 mtd; |
| 3312 | u32 data; |
| 3313 | |
| 3314 | mfd = SKD_READL(skdev, FIT_MSG_FROM_DEVICE); |
| 3315 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3316 | pr_debug("%s:%s:%d mfd=0x%x last_mtd=0x%x\n", |
| 3317 | skdev->name, __func__, __LINE__, mfd, skdev->last_mtd); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3318 | |
| 3319 | /* ignore any mtd that is an ack for something we didn't send */ |
| 3320 | if (FIT_MXD_TYPE(mfd) != FIT_MXD_TYPE(skdev->last_mtd)) |
| 3321 | return; |
| 3322 | |
| 3323 | switch (FIT_MXD_TYPE(mfd)) { |
| 3324 | case FIT_MTD_FITFW_INIT: |
| 3325 | skdev->proto_ver = FIT_PROTOCOL_MAJOR_VER(mfd); |
| 3326 | |
| 3327 | if (skdev->proto_ver != FIT_PROTOCOL_VERSION_1) { |
| 3328 | pr_err("(%s): protocol mismatch\n", |
| 3329 | skdev->name); |
| 3330 | pr_err("(%s): got=%d support=%d\n", |
| 3331 | skdev->name, skdev->proto_ver, |
| 3332 | FIT_PROTOCOL_VERSION_1); |
| 3333 | pr_err("(%s): please upgrade driver\n", |
| 3334 | skdev->name); |
| 3335 | skdev->state = SKD_DRVR_STATE_PROTOCOL_MISMATCH; |
| 3336 | skd_soft_reset(skdev); |
| 3337 | break; |
| 3338 | } |
| 3339 | mtd = FIT_MXD_CONS(FIT_MTD_GET_CMDQ_DEPTH, 0, 0); |
| 3340 | SKD_WRITEL(skdev, mtd, FIT_MSG_TO_DEVICE); |
| 3341 | skdev->last_mtd = mtd; |
| 3342 | break; |
| 3343 | |
| 3344 | case FIT_MTD_GET_CMDQ_DEPTH: |
| 3345 | skdev->dev_max_queue_depth = FIT_MXD_DATA(mfd); |
| 3346 | mtd = FIT_MXD_CONS(FIT_MTD_SET_COMPQ_DEPTH, 0, |
| 3347 | SKD_N_COMPLETION_ENTRY); |
| 3348 | SKD_WRITEL(skdev, mtd, FIT_MSG_TO_DEVICE); |
| 3349 | skdev->last_mtd = mtd; |
| 3350 | break; |
| 3351 | |
| 3352 | case FIT_MTD_SET_COMPQ_DEPTH: |
| 3353 | SKD_WRITEQ(skdev, skdev->cq_dma_address, FIT_MSG_TO_DEVICE_ARG); |
| 3354 | mtd = FIT_MXD_CONS(FIT_MTD_SET_COMPQ_ADDR, 0, 0); |
| 3355 | SKD_WRITEL(skdev, mtd, FIT_MSG_TO_DEVICE); |
| 3356 | skdev->last_mtd = mtd; |
| 3357 | break; |
| 3358 | |
| 3359 | case FIT_MTD_SET_COMPQ_ADDR: |
| 3360 | skd_reset_skcomp(skdev); |
| 3361 | mtd = FIT_MXD_CONS(FIT_MTD_CMD_LOG_HOST_ID, 0, skdev->devno); |
| 3362 | SKD_WRITEL(skdev, mtd, FIT_MSG_TO_DEVICE); |
| 3363 | skdev->last_mtd = mtd; |
| 3364 | break; |
| 3365 | |
| 3366 | case FIT_MTD_CMD_LOG_HOST_ID: |
| 3367 | skdev->connect_time_stamp = get_seconds(); |
| 3368 | data = skdev->connect_time_stamp & 0xFFFF; |
| 3369 | mtd = FIT_MXD_CONS(FIT_MTD_CMD_LOG_TIME_STAMP_LO, 0, data); |
| 3370 | SKD_WRITEL(skdev, mtd, FIT_MSG_TO_DEVICE); |
| 3371 | skdev->last_mtd = mtd; |
| 3372 | break; |
| 3373 | |
| 3374 | case FIT_MTD_CMD_LOG_TIME_STAMP_LO: |
| 3375 | skdev->drive_jiffies = FIT_MXD_DATA(mfd); |
| 3376 | data = (skdev->connect_time_stamp >> 16) & 0xFFFF; |
| 3377 | mtd = FIT_MXD_CONS(FIT_MTD_CMD_LOG_TIME_STAMP_HI, 0, data); |
| 3378 | SKD_WRITEL(skdev, mtd, FIT_MSG_TO_DEVICE); |
| 3379 | skdev->last_mtd = mtd; |
| 3380 | break; |
| 3381 | |
| 3382 | case FIT_MTD_CMD_LOG_TIME_STAMP_HI: |
| 3383 | skdev->drive_jiffies |= (FIT_MXD_DATA(mfd) << 16); |
| 3384 | mtd = FIT_MXD_CONS(FIT_MTD_ARM_QUEUE, 0, 0); |
| 3385 | SKD_WRITEL(skdev, mtd, FIT_MSG_TO_DEVICE); |
| 3386 | skdev->last_mtd = mtd; |
| 3387 | |
| 3388 | pr_err("(%s): Time sync driver=0x%x device=0x%x\n", |
| 3389 | skd_name(skdev), |
| 3390 | skdev->connect_time_stamp, skdev->drive_jiffies); |
| 3391 | break; |
| 3392 | |
| 3393 | case FIT_MTD_ARM_QUEUE: |
| 3394 | skdev->last_mtd = 0; |
| 3395 | /* |
| 3396 | * State should be, or soon will be, FIT_SR_DRIVE_ONLINE. |
| 3397 | */ |
| 3398 | break; |
| 3399 | |
| 3400 | default: |
| 3401 | break; |
| 3402 | } |
| 3403 | } |
| 3404 | |
| 3405 | static void skd_disable_interrupts(struct skd_device *skdev) |
| 3406 | { |
| 3407 | u32 sense; |
| 3408 | |
| 3409 | sense = SKD_READL(skdev, FIT_CONTROL); |
| 3410 | sense &= ~FIT_CR_ENABLE_INTERRUPTS; |
| 3411 | SKD_WRITEL(skdev, sense, FIT_CONTROL); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3412 | pr_debug("%s:%s:%d sense 0x%x\n", |
| 3413 | skdev->name, __func__, __LINE__, sense); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3414 | |
| 3415 | /* Note that the 1s is written. A 1-bit means |
| 3416 | * disable, a 0 means enable. |
| 3417 | */ |
| 3418 | SKD_WRITEL(skdev, ~0, FIT_INT_MASK_HOST); |
| 3419 | } |
| 3420 | |
| 3421 | static void skd_enable_interrupts(struct skd_device *skdev) |
| 3422 | { |
| 3423 | u32 val; |
| 3424 | |
| 3425 | /* unmask interrupts first */ |
| 3426 | val = FIT_ISH_FW_STATE_CHANGE + |
| 3427 | FIT_ISH_COMPLETION_POSTED + FIT_ISH_MSG_FROM_DEV; |
| 3428 | |
| 3429 | /* Note that the compliment of mask is written. A 1-bit means |
| 3430 | * disable, a 0 means enable. */ |
| 3431 | SKD_WRITEL(skdev, ~val, FIT_INT_MASK_HOST); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3432 | pr_debug("%s:%s:%d interrupt mask=0x%x\n", |
| 3433 | skdev->name, __func__, __LINE__, ~val); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3434 | |
| 3435 | val = SKD_READL(skdev, FIT_CONTROL); |
| 3436 | val |= FIT_CR_ENABLE_INTERRUPTS; |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3437 | pr_debug("%s:%s:%d control=0x%x\n", |
| 3438 | skdev->name, __func__, __LINE__, val); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3439 | SKD_WRITEL(skdev, val, FIT_CONTROL); |
| 3440 | } |
| 3441 | |
| 3442 | /* |
| 3443 | ***************************************************************************** |
| 3444 | * START, STOP, RESTART, QUIESCE, UNQUIESCE |
| 3445 | ***************************************************************************** |
| 3446 | */ |
| 3447 | |
| 3448 | static void skd_soft_reset(struct skd_device *skdev) |
| 3449 | { |
| 3450 | u32 val; |
| 3451 | |
| 3452 | val = SKD_READL(skdev, FIT_CONTROL); |
| 3453 | val |= (FIT_CR_SOFT_RESET); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3454 | pr_debug("%s:%s:%d control=0x%x\n", |
| 3455 | skdev->name, __func__, __LINE__, val); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3456 | SKD_WRITEL(skdev, val, FIT_CONTROL); |
| 3457 | } |
| 3458 | |
| 3459 | static void skd_start_device(struct skd_device *skdev) |
| 3460 | { |
| 3461 | unsigned long flags; |
| 3462 | u32 sense; |
| 3463 | u32 state; |
| 3464 | |
| 3465 | spin_lock_irqsave(&skdev->lock, flags); |
| 3466 | |
| 3467 | /* ack all ghost interrupts */ |
| 3468 | SKD_WRITEL(skdev, FIT_INT_DEF_MASK, FIT_INT_STATUS_HOST); |
| 3469 | |
| 3470 | sense = SKD_READL(skdev, FIT_STATUS); |
| 3471 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3472 | pr_debug("%s:%s:%d initial status=0x%x\n", |
| 3473 | skdev->name, __func__, __LINE__, sense); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3474 | |
| 3475 | state = sense & FIT_SR_DRIVE_STATE_MASK; |
| 3476 | skdev->drive_state = state; |
| 3477 | skdev->last_mtd = 0; |
| 3478 | |
| 3479 | skdev->state = SKD_DRVR_STATE_STARTING; |
| 3480 | skdev->timer_countdown = SKD_STARTING_TIMO; |
| 3481 | |
| 3482 | skd_enable_interrupts(skdev); |
| 3483 | |
| 3484 | switch (skdev->drive_state) { |
| 3485 | case FIT_SR_DRIVE_OFFLINE: |
| 3486 | pr_err("(%s): Drive offline...\n", skd_name(skdev)); |
| 3487 | break; |
| 3488 | |
| 3489 | case FIT_SR_DRIVE_FW_BOOTING: |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3490 | pr_debug("%s:%s:%d FIT_SR_DRIVE_FW_BOOTING %s\n", |
| 3491 | skdev->name, __func__, __LINE__, skdev->name); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3492 | skdev->state = SKD_DRVR_STATE_WAIT_BOOT; |
| 3493 | skdev->timer_countdown = SKD_WAIT_BOOT_TIMO; |
| 3494 | break; |
| 3495 | |
| 3496 | case FIT_SR_DRIVE_BUSY_SANITIZE: |
| 3497 | pr_info("(%s): Start: BUSY_SANITIZE\n", |
| 3498 | skd_name(skdev)); |
| 3499 | skdev->state = SKD_DRVR_STATE_BUSY_SANITIZE; |
| 3500 | skdev->timer_countdown = SKD_STARTED_BUSY_TIMO; |
| 3501 | break; |
| 3502 | |
| 3503 | case FIT_SR_DRIVE_BUSY_ERASE: |
| 3504 | pr_info("(%s): Start: BUSY_ERASE\n", skd_name(skdev)); |
| 3505 | skdev->state = SKD_DRVR_STATE_BUSY_ERASE; |
| 3506 | skdev->timer_countdown = SKD_STARTED_BUSY_TIMO; |
| 3507 | break; |
| 3508 | |
| 3509 | case FIT_SR_DRIVE_INIT: |
| 3510 | case FIT_SR_DRIVE_ONLINE: |
| 3511 | skd_soft_reset(skdev); |
| 3512 | break; |
| 3513 | |
| 3514 | case FIT_SR_DRIVE_BUSY: |
| 3515 | pr_err("(%s): Drive Busy...\n", skd_name(skdev)); |
| 3516 | skdev->state = SKD_DRVR_STATE_BUSY; |
| 3517 | skdev->timer_countdown = SKD_STARTED_BUSY_TIMO; |
| 3518 | break; |
| 3519 | |
| 3520 | case FIT_SR_DRIVE_SOFT_RESET: |
| 3521 | pr_err("(%s) drive soft reset in prog\n", |
| 3522 | skd_name(skdev)); |
| 3523 | break; |
| 3524 | |
| 3525 | case FIT_SR_DRIVE_FAULT: |
| 3526 | /* Fault state is bad...soft reset won't do it... |
| 3527 | * Hard reset, maybe, but does it work on device? |
| 3528 | * For now, just fault so the system doesn't hang. |
| 3529 | */ |
| 3530 | skd_drive_fault(skdev); |
| 3531 | /*start the queue so we can respond with error to requests */ |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3532 | pr_debug("%s:%s:%d starting %s queue\n", |
| 3533 | skdev->name, __func__, __LINE__, skdev->name); |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 3534 | blk_start_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3535 | skdev->gendisk_on = -1; |
| 3536 | wake_up_interruptible(&skdev->waitq); |
| 3537 | break; |
| 3538 | |
| 3539 | case 0xFF: |
| 3540 | /* Most likely the device isn't there or isn't responding |
| 3541 | * to the BAR1 addresses. */ |
| 3542 | skd_drive_disappeared(skdev); |
| 3543 | /*start the queue so we can respond with error to requests */ |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3544 | pr_debug("%s:%s:%d starting %s queue to error-out reqs\n", |
| 3545 | skdev->name, __func__, __LINE__, skdev->name); |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 3546 | blk_start_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3547 | skdev->gendisk_on = -1; |
| 3548 | wake_up_interruptible(&skdev->waitq); |
| 3549 | break; |
| 3550 | |
| 3551 | default: |
| 3552 | pr_err("(%s) Start: unknown state %x\n", |
| 3553 | skd_name(skdev), skdev->drive_state); |
| 3554 | break; |
| 3555 | } |
| 3556 | |
| 3557 | state = SKD_READL(skdev, FIT_CONTROL); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3558 | pr_debug("%s:%s:%d FIT Control Status=0x%x\n", |
| 3559 | skdev->name, __func__, __LINE__, state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3560 | |
| 3561 | state = SKD_READL(skdev, FIT_INT_STATUS_HOST); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3562 | pr_debug("%s:%s:%d Intr Status=0x%x\n", |
| 3563 | skdev->name, __func__, __LINE__, state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3564 | |
| 3565 | state = SKD_READL(skdev, FIT_INT_MASK_HOST); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3566 | pr_debug("%s:%s:%d Intr Mask=0x%x\n", |
| 3567 | skdev->name, __func__, __LINE__, state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3568 | |
| 3569 | state = SKD_READL(skdev, FIT_MSG_FROM_DEVICE); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3570 | pr_debug("%s:%s:%d Msg from Dev=0x%x\n", |
| 3571 | skdev->name, __func__, __LINE__, state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3572 | |
| 3573 | state = SKD_READL(skdev, FIT_HW_VERSION); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3574 | pr_debug("%s:%s:%d HW version=0x%x\n", |
| 3575 | skdev->name, __func__, __LINE__, state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3576 | |
| 3577 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 3578 | } |
| 3579 | |
| 3580 | static void skd_stop_device(struct skd_device *skdev) |
| 3581 | { |
| 3582 | unsigned long flags; |
| 3583 | struct skd_special_context *skspcl = &skdev->internal_skspcl; |
| 3584 | u32 dev_state; |
| 3585 | int i; |
| 3586 | |
| 3587 | spin_lock_irqsave(&skdev->lock, flags); |
| 3588 | |
| 3589 | if (skdev->state != SKD_DRVR_STATE_ONLINE) { |
| 3590 | pr_err("(%s): skd_stop_device not online no sync\n", |
| 3591 | skd_name(skdev)); |
| 3592 | goto stop_out; |
| 3593 | } |
| 3594 | |
| 3595 | if (skspcl->req.state != SKD_REQ_STATE_IDLE) { |
| 3596 | pr_err("(%s): skd_stop_device no special\n", |
| 3597 | skd_name(skdev)); |
| 3598 | goto stop_out; |
| 3599 | } |
| 3600 | |
| 3601 | skdev->state = SKD_DRVR_STATE_SYNCING; |
| 3602 | skdev->sync_done = 0; |
| 3603 | |
| 3604 | skd_send_internal_skspcl(skdev, skspcl, SYNCHRONIZE_CACHE); |
| 3605 | |
| 3606 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 3607 | |
| 3608 | wait_event_interruptible_timeout(skdev->waitq, |
| 3609 | (skdev->sync_done), (10 * HZ)); |
| 3610 | |
| 3611 | spin_lock_irqsave(&skdev->lock, flags); |
| 3612 | |
| 3613 | switch (skdev->sync_done) { |
| 3614 | case 0: |
| 3615 | pr_err("(%s): skd_stop_device no sync\n", |
| 3616 | skd_name(skdev)); |
| 3617 | break; |
| 3618 | case 1: |
| 3619 | pr_err("(%s): skd_stop_device sync done\n", |
| 3620 | skd_name(skdev)); |
| 3621 | break; |
| 3622 | default: |
| 3623 | pr_err("(%s): skd_stop_device sync error\n", |
| 3624 | skd_name(skdev)); |
| 3625 | } |
| 3626 | |
| 3627 | stop_out: |
| 3628 | skdev->state = SKD_DRVR_STATE_STOPPING; |
| 3629 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 3630 | |
| 3631 | skd_kill_timer(skdev); |
| 3632 | |
| 3633 | spin_lock_irqsave(&skdev->lock, flags); |
| 3634 | skd_disable_interrupts(skdev); |
| 3635 | |
| 3636 | /* ensure all ints on device are cleared */ |
| 3637 | /* soft reset the device to unload with a clean slate */ |
| 3638 | SKD_WRITEL(skdev, FIT_INT_DEF_MASK, FIT_INT_STATUS_HOST); |
| 3639 | SKD_WRITEL(skdev, FIT_CR_SOFT_RESET, FIT_CONTROL); |
| 3640 | |
| 3641 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 3642 | |
| 3643 | /* poll every 100ms, 1 second timeout */ |
| 3644 | for (i = 0; i < 10; i++) { |
| 3645 | dev_state = |
| 3646 | SKD_READL(skdev, FIT_STATUS) & FIT_SR_DRIVE_STATE_MASK; |
| 3647 | if (dev_state == FIT_SR_DRIVE_INIT) |
| 3648 | break; |
| 3649 | set_current_state(TASK_INTERRUPTIBLE); |
| 3650 | schedule_timeout(msecs_to_jiffies(100)); |
| 3651 | } |
| 3652 | |
| 3653 | if (dev_state != FIT_SR_DRIVE_INIT) |
| 3654 | pr_err("(%s): skd_stop_device state error 0x%02x\n", |
| 3655 | skd_name(skdev), dev_state); |
| 3656 | } |
| 3657 | |
| 3658 | /* assume spinlock is held */ |
| 3659 | static void skd_restart_device(struct skd_device *skdev) |
| 3660 | { |
| 3661 | u32 state; |
| 3662 | |
| 3663 | /* ack all ghost interrupts */ |
| 3664 | SKD_WRITEL(skdev, FIT_INT_DEF_MASK, FIT_INT_STATUS_HOST); |
| 3665 | |
| 3666 | state = SKD_READL(skdev, FIT_STATUS); |
| 3667 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3668 | pr_debug("%s:%s:%d drive status=0x%x\n", |
| 3669 | skdev->name, __func__, __LINE__, state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3670 | |
| 3671 | state &= FIT_SR_DRIVE_STATE_MASK; |
| 3672 | skdev->drive_state = state; |
| 3673 | skdev->last_mtd = 0; |
| 3674 | |
| 3675 | skdev->state = SKD_DRVR_STATE_RESTARTING; |
| 3676 | skdev->timer_countdown = SKD_RESTARTING_TIMO; |
| 3677 | |
| 3678 | skd_soft_reset(skdev); |
| 3679 | } |
| 3680 | |
| 3681 | /* assume spinlock is held */ |
| 3682 | static int skd_quiesce_dev(struct skd_device *skdev) |
| 3683 | { |
| 3684 | int rc = 0; |
| 3685 | |
| 3686 | switch (skdev->state) { |
| 3687 | case SKD_DRVR_STATE_BUSY: |
| 3688 | case SKD_DRVR_STATE_BUSY_IMMINENT: |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3689 | pr_debug("%s:%s:%d stopping %s queue\n", |
| 3690 | skdev->name, __func__, __LINE__, skdev->name); |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 3691 | blk_stop_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3692 | break; |
| 3693 | case SKD_DRVR_STATE_ONLINE: |
| 3694 | case SKD_DRVR_STATE_STOPPING: |
| 3695 | case SKD_DRVR_STATE_SYNCING: |
| 3696 | case SKD_DRVR_STATE_PAUSING: |
| 3697 | case SKD_DRVR_STATE_PAUSED: |
| 3698 | case SKD_DRVR_STATE_STARTING: |
| 3699 | case SKD_DRVR_STATE_RESTARTING: |
| 3700 | case SKD_DRVR_STATE_RESUMING: |
| 3701 | default: |
| 3702 | rc = -EINVAL; |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3703 | pr_debug("%s:%s:%d state [%d] not implemented\n", |
| 3704 | skdev->name, __func__, __LINE__, skdev->state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3705 | } |
| 3706 | return rc; |
| 3707 | } |
| 3708 | |
| 3709 | /* assume spinlock is held */ |
| 3710 | static int skd_unquiesce_dev(struct skd_device *skdev) |
| 3711 | { |
| 3712 | int prev_driver_state = skdev->state; |
| 3713 | |
| 3714 | skd_log_skdev(skdev, "unquiesce"); |
| 3715 | if (skdev->state == SKD_DRVR_STATE_ONLINE) { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3716 | pr_debug("%s:%s:%d **** device already ONLINE\n", |
| 3717 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3718 | return 0; |
| 3719 | } |
| 3720 | if (skdev->drive_state != FIT_SR_DRIVE_ONLINE) { |
| 3721 | /* |
| 3722 | * If there has been an state change to other than |
| 3723 | * ONLINE, we will rely on controller state change |
| 3724 | * to come back online and restart the queue. |
| 3725 | * The BUSY state means that driver is ready to |
| 3726 | * continue normal processing but waiting for controller |
| 3727 | * to become available. |
| 3728 | */ |
| 3729 | skdev->state = SKD_DRVR_STATE_BUSY; |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3730 | pr_debug("%s:%s:%d drive BUSY state\n", |
| 3731 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3732 | return 0; |
| 3733 | } |
| 3734 | |
| 3735 | /* |
| 3736 | * Drive has just come online, driver is either in startup, |
| 3737 | * paused performing a task, or bust waiting for hardware. |
| 3738 | */ |
| 3739 | switch (skdev->state) { |
| 3740 | case SKD_DRVR_STATE_PAUSED: |
| 3741 | case SKD_DRVR_STATE_BUSY: |
| 3742 | case SKD_DRVR_STATE_BUSY_IMMINENT: |
| 3743 | case SKD_DRVR_STATE_BUSY_ERASE: |
| 3744 | case SKD_DRVR_STATE_STARTING: |
| 3745 | case SKD_DRVR_STATE_RESTARTING: |
| 3746 | case SKD_DRVR_STATE_FAULT: |
| 3747 | case SKD_DRVR_STATE_IDLE: |
| 3748 | case SKD_DRVR_STATE_LOAD: |
| 3749 | skdev->state = SKD_DRVR_STATE_ONLINE; |
| 3750 | pr_err("(%s): Driver state %s(%d)=>%s(%d)\n", |
| 3751 | skd_name(skdev), |
| 3752 | skd_skdev_state_to_str(prev_driver_state), |
| 3753 | prev_driver_state, skd_skdev_state_to_str(skdev->state), |
| 3754 | skdev->state); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3755 | pr_debug("%s:%s:%d **** device ONLINE...starting block queue\n", |
| 3756 | skdev->name, __func__, __LINE__); |
| 3757 | pr_debug("%s:%s:%d starting %s queue\n", |
| 3758 | skdev->name, __func__, __LINE__, skdev->name); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3759 | pr_info("(%s): STEC s1120 ONLINE\n", skd_name(skdev)); |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 3760 | blk_start_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3761 | skdev->gendisk_on = 1; |
| 3762 | wake_up_interruptible(&skdev->waitq); |
| 3763 | break; |
| 3764 | |
| 3765 | case SKD_DRVR_STATE_DISAPPEARED: |
| 3766 | default: |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3767 | pr_debug("%s:%s:%d **** driver state %d, not implemented \n", |
| 3768 | skdev->name, __func__, __LINE__, |
| 3769 | skdev->state); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3770 | return -EBUSY; |
| 3771 | } |
| 3772 | return 0; |
| 3773 | } |
| 3774 | |
| 3775 | /* |
| 3776 | ***************************************************************************** |
| 3777 | * PCIe MSI/MSI-X INTERRUPT HANDLERS |
| 3778 | ***************************************************************************** |
| 3779 | */ |
| 3780 | |
| 3781 | static irqreturn_t skd_reserved_isr(int irq, void *skd_host_data) |
| 3782 | { |
| 3783 | struct skd_device *skdev = skd_host_data; |
| 3784 | unsigned long flags; |
| 3785 | |
| 3786 | spin_lock_irqsave(&skdev->lock, flags); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3787 | pr_debug("%s:%s:%d MSIX = 0x%x\n", |
| 3788 | skdev->name, __func__, __LINE__, |
| 3789 | SKD_READL(skdev, FIT_INT_STATUS_HOST)); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3790 | pr_err("(%s): MSIX reserved irq %d = 0x%x\n", skd_name(skdev), |
| 3791 | irq, SKD_READL(skdev, FIT_INT_STATUS_HOST)); |
| 3792 | SKD_WRITEL(skdev, FIT_INT_RESERVED_MASK, FIT_INT_STATUS_HOST); |
| 3793 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 3794 | return IRQ_HANDLED; |
| 3795 | } |
| 3796 | |
| 3797 | static irqreturn_t skd_statec_isr(int irq, void *skd_host_data) |
| 3798 | { |
| 3799 | struct skd_device *skdev = skd_host_data; |
| 3800 | unsigned long flags; |
| 3801 | |
| 3802 | spin_lock_irqsave(&skdev->lock, flags); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3803 | pr_debug("%s:%s:%d MSIX = 0x%x\n", |
| 3804 | skdev->name, __func__, __LINE__, |
| 3805 | SKD_READL(skdev, FIT_INT_STATUS_HOST)); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3806 | SKD_WRITEL(skdev, FIT_ISH_FW_STATE_CHANGE, FIT_INT_STATUS_HOST); |
| 3807 | skd_isr_fwstate(skdev); |
| 3808 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 3809 | return IRQ_HANDLED; |
| 3810 | } |
| 3811 | |
| 3812 | static irqreturn_t skd_comp_q(int irq, void *skd_host_data) |
| 3813 | { |
| 3814 | struct skd_device *skdev = skd_host_data; |
| 3815 | unsigned long flags; |
| 3816 | int flush_enqueued = 0; |
| 3817 | int deferred; |
| 3818 | |
| 3819 | spin_lock_irqsave(&skdev->lock, flags); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3820 | pr_debug("%s:%s:%d MSIX = 0x%x\n", |
| 3821 | skdev->name, __func__, __LINE__, |
| 3822 | SKD_READL(skdev, FIT_INT_STATUS_HOST)); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3823 | SKD_WRITEL(skdev, FIT_ISH_COMPLETION_POSTED, FIT_INT_STATUS_HOST); |
| 3824 | deferred = skd_isr_completion_posted(skdev, skd_isr_comp_limit, |
| 3825 | &flush_enqueued); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3826 | if (flush_enqueued) |
| 3827 | skd_request_fn(skdev->queue); |
| 3828 | |
| 3829 | if (deferred) |
| 3830 | schedule_work(&skdev->completion_worker); |
| 3831 | else if (!flush_enqueued) |
| 3832 | skd_request_fn(skdev->queue); |
| 3833 | |
| 3834 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 3835 | |
| 3836 | return IRQ_HANDLED; |
| 3837 | } |
| 3838 | |
| 3839 | static irqreturn_t skd_msg_isr(int irq, void *skd_host_data) |
| 3840 | { |
| 3841 | struct skd_device *skdev = skd_host_data; |
| 3842 | unsigned long flags; |
| 3843 | |
| 3844 | spin_lock_irqsave(&skdev->lock, flags); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3845 | pr_debug("%s:%s:%d MSIX = 0x%x\n", |
| 3846 | skdev->name, __func__, __LINE__, |
| 3847 | SKD_READL(skdev, FIT_INT_STATUS_HOST)); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3848 | SKD_WRITEL(skdev, FIT_ISH_MSG_FROM_DEV, FIT_INT_STATUS_HOST); |
| 3849 | skd_isr_msg_from_dev(skdev); |
| 3850 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 3851 | return IRQ_HANDLED; |
| 3852 | } |
| 3853 | |
| 3854 | static irqreturn_t skd_qfull_isr(int irq, void *skd_host_data) |
| 3855 | { |
| 3856 | struct skd_device *skdev = skd_host_data; |
| 3857 | unsigned long flags; |
| 3858 | |
| 3859 | spin_lock_irqsave(&skdev->lock, flags); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3860 | pr_debug("%s:%s:%d MSIX = 0x%x\n", |
| 3861 | skdev->name, __func__, __LINE__, |
| 3862 | SKD_READL(skdev, FIT_INT_STATUS_HOST)); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3863 | SKD_WRITEL(skdev, FIT_INT_QUEUE_FULL, FIT_INT_STATUS_HOST); |
| 3864 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 3865 | return IRQ_HANDLED; |
| 3866 | } |
| 3867 | |
| 3868 | /* |
| 3869 | ***************************************************************************** |
| 3870 | * PCIe MSI/MSI-X SETUP |
| 3871 | ***************************************************************************** |
| 3872 | */ |
| 3873 | |
| 3874 | struct skd_msix_entry { |
| 3875 | int have_irq; |
| 3876 | u32 vector; |
| 3877 | u32 entry; |
| 3878 | struct skd_device *rsp; |
| 3879 | char isr_name[30]; |
| 3880 | }; |
| 3881 | |
| 3882 | struct skd_init_msix_entry { |
| 3883 | const char *name; |
| 3884 | irq_handler_t handler; |
| 3885 | }; |
| 3886 | |
| 3887 | #define SKD_MAX_MSIX_COUNT 13 |
| 3888 | #define SKD_MIN_MSIX_COUNT 7 |
| 3889 | #define SKD_BASE_MSIX_IRQ 4 |
| 3890 | |
| 3891 | static struct skd_init_msix_entry msix_entries[SKD_MAX_MSIX_COUNT] = { |
| 3892 | { "(DMA 0)", skd_reserved_isr }, |
| 3893 | { "(DMA 1)", skd_reserved_isr }, |
| 3894 | { "(DMA 2)", skd_reserved_isr }, |
| 3895 | { "(DMA 3)", skd_reserved_isr }, |
| 3896 | { "(State Change)", skd_statec_isr }, |
| 3897 | { "(COMPL_Q)", skd_comp_q }, |
| 3898 | { "(MSG)", skd_msg_isr }, |
| 3899 | { "(Reserved)", skd_reserved_isr }, |
| 3900 | { "(Reserved)", skd_reserved_isr }, |
| 3901 | { "(Queue Full 0)", skd_qfull_isr }, |
| 3902 | { "(Queue Full 1)", skd_qfull_isr }, |
| 3903 | { "(Queue Full 2)", skd_qfull_isr }, |
| 3904 | { "(Queue Full 3)", skd_qfull_isr }, |
| 3905 | }; |
| 3906 | |
| 3907 | static void skd_release_msix(struct skd_device *skdev) |
| 3908 | { |
| 3909 | struct skd_msix_entry *qentry; |
| 3910 | int i; |
| 3911 | |
Alexander Gordeev | 4681776 | 2014-02-19 09:58:19 +0100 | [diff] [blame] | 3912 | if (skdev->msix_entries) { |
| 3913 | for (i = 0; i < skdev->msix_count; i++) { |
| 3914 | qentry = &skdev->msix_entries[i]; |
| 3915 | skdev = qentry->rsp; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3916 | |
Alexander Gordeev | 4681776 | 2014-02-19 09:58:19 +0100 | [diff] [blame] | 3917 | if (qentry->have_irq) |
| 3918 | devm_free_irq(&skdev->pdev->dev, |
| 3919 | qentry->vector, qentry->rsp); |
| 3920 | } |
| 3921 | |
| 3922 | kfree(skdev->msix_entries); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3923 | } |
Alexander Gordeev | 4681776 | 2014-02-19 09:58:19 +0100 | [diff] [blame] | 3924 | |
| 3925 | if (skdev->msix_count) |
| 3926 | pci_disable_msix(skdev->pdev); |
| 3927 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3928 | skdev->msix_count = 0; |
| 3929 | skdev->msix_entries = NULL; |
| 3930 | } |
| 3931 | |
| 3932 | static int skd_acquire_msix(struct skd_device *skdev) |
| 3933 | { |
Alexander Gordeev | a9df862 | 2014-02-19 09:58:21 +0100 | [diff] [blame] | 3934 | int i, rc; |
Alexander Gordeev | 4681776 | 2014-02-19 09:58:19 +0100 | [diff] [blame] | 3935 | struct pci_dev *pdev = skdev->pdev; |
| 3936 | struct msix_entry *entries; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3937 | struct skd_msix_entry *qentry; |
| 3938 | |
Alexander Gordeev | a9df862 | 2014-02-19 09:58:21 +0100 | [diff] [blame] | 3939 | entries = kzalloc(sizeof(struct msix_entry) * SKD_MAX_MSIX_COUNT, |
| 3940 | GFP_KERNEL); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3941 | if (!entries) |
| 3942 | return -ENOMEM; |
| 3943 | |
Alexander Gordeev | a9df862 | 2014-02-19 09:58:21 +0100 | [diff] [blame] | 3944 | for (i = 0; i < SKD_MAX_MSIX_COUNT; i++) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3945 | entries[i].entry = i; |
| 3946 | |
Alexander Gordeev | 01aad3f | 2014-04-21 17:19:31 +0200 | [diff] [blame] | 3947 | rc = pci_enable_msix_exact(pdev, entries, SKD_MAX_MSIX_COUNT); |
| 3948 | if (rc) { |
Alexander Gordeev | a9df862 | 2014-02-19 09:58:21 +0100 | [diff] [blame] | 3949 | pr_err("(%s): failed to enable MSI-X %d\n", |
| 3950 | skd_name(skdev), rc); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3951 | goto msix_out; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3952 | } |
Alexander Gordeev | 4681776 | 2014-02-19 09:58:19 +0100 | [diff] [blame] | 3953 | |
Alexander Gordeev | 01aad3f | 2014-04-21 17:19:31 +0200 | [diff] [blame] | 3954 | skdev->msix_count = SKD_MAX_MSIX_COUNT; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3955 | skdev->msix_entries = kzalloc(sizeof(struct skd_msix_entry) * |
| 3956 | skdev->msix_count, GFP_KERNEL); |
| 3957 | if (!skdev->msix_entries) { |
| 3958 | rc = -ENOMEM; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3959 | pr_err("(%s): msix table allocation error\n", |
| 3960 | skd_name(skdev)); |
| 3961 | goto msix_out; |
| 3962 | } |
| 3963 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3964 | for (i = 0; i < skdev->msix_count; i++) { |
Alexander Gordeev | 1bc5ce5 | 2014-02-19 09:58:20 +0100 | [diff] [blame] | 3965 | qentry = &skdev->msix_entries[i]; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3966 | qentry->vector = entries[i].vector; |
| 3967 | qentry->entry = entries[i].entry; |
| 3968 | qentry->rsp = NULL; |
| 3969 | qentry->have_irq = 0; |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3970 | pr_debug("%s:%s:%d %s: <%s> msix (%d) vec %d, entry %x\n", |
| 3971 | skdev->name, __func__, __LINE__, |
| 3972 | pci_name(pdev), skdev->name, |
| 3973 | i, qentry->vector, qentry->entry); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3974 | } |
| 3975 | |
| 3976 | /* Enable MSI-X vectors for the base queue */ |
Alexander Gordeev | c5e3035 | 2014-02-19 09:58:18 +0100 | [diff] [blame] | 3977 | for (i = 0; i < skdev->msix_count; i++) { |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3978 | qentry = &skdev->msix_entries[i]; |
| 3979 | snprintf(qentry->isr_name, sizeof(qentry->isr_name), |
| 3980 | "%s%d-msix %s", DRV_NAME, skdev->devno, |
| 3981 | msix_entries[i].name); |
| 3982 | rc = devm_request_irq(&skdev->pdev->dev, qentry->vector, |
| 3983 | msix_entries[i].handler, 0, |
| 3984 | qentry->isr_name, skdev); |
| 3985 | if (rc) { |
| 3986 | pr_err("(%s): Unable to register(%d) MSI-X " |
| 3987 | "handler %d: %s\n", |
| 3988 | skd_name(skdev), rc, i, qentry->isr_name); |
| 3989 | goto msix_out; |
| 3990 | } else { |
| 3991 | qentry->have_irq = 1; |
| 3992 | qentry->rsp = skdev; |
| 3993 | } |
| 3994 | } |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 3995 | pr_debug("%s:%s:%d %s: <%s> msix %d irq(s) enabled\n", |
| 3996 | skdev->name, __func__, __LINE__, |
| 3997 | pci_name(pdev), skdev->name, skdev->msix_count); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 3998 | return 0; |
| 3999 | |
| 4000 | msix_out: |
| 4001 | if (entries) |
| 4002 | kfree(entries); |
| 4003 | skd_release_msix(skdev); |
| 4004 | return rc; |
| 4005 | } |
| 4006 | |
| 4007 | static int skd_acquire_irq(struct skd_device *skdev) |
| 4008 | { |
| 4009 | int rc; |
| 4010 | struct pci_dev *pdev; |
| 4011 | |
| 4012 | pdev = skdev->pdev; |
| 4013 | skdev->msix_count = 0; |
| 4014 | |
| 4015 | RETRY_IRQ_TYPE: |
| 4016 | switch (skdev->irq_type) { |
| 4017 | case SKD_IRQ_MSIX: |
| 4018 | rc = skd_acquire_msix(skdev); |
| 4019 | if (!rc) |
| 4020 | pr_info("(%s): MSI-X %d irqs enabled\n", |
| 4021 | skd_name(skdev), skdev->msix_count); |
| 4022 | else { |
| 4023 | pr_err( |
| 4024 | "(%s): failed to enable MSI-X, re-trying with MSI %d\n", |
| 4025 | skd_name(skdev), rc); |
| 4026 | skdev->irq_type = SKD_IRQ_MSI; |
| 4027 | goto RETRY_IRQ_TYPE; |
| 4028 | } |
| 4029 | break; |
| 4030 | case SKD_IRQ_MSI: |
| 4031 | snprintf(skdev->isr_name, sizeof(skdev->isr_name), "%s%d-msi", |
| 4032 | DRV_NAME, skdev->devno); |
Alexander Gordeev | a9df862 | 2014-02-19 09:58:21 +0100 | [diff] [blame] | 4033 | rc = pci_enable_msi_range(pdev, 1, 1); |
| 4034 | if (rc > 0) { |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4035 | rc = devm_request_irq(&pdev->dev, pdev->irq, skd_isr, 0, |
| 4036 | skdev->isr_name, skdev); |
| 4037 | if (rc) { |
| 4038 | pci_disable_msi(pdev); |
| 4039 | pr_err( |
| 4040 | "(%s): failed to allocate the MSI interrupt %d\n", |
| 4041 | skd_name(skdev), rc); |
| 4042 | goto RETRY_IRQ_LEGACY; |
| 4043 | } |
| 4044 | pr_info("(%s): MSI irq %d enabled\n", |
| 4045 | skd_name(skdev), pdev->irq); |
| 4046 | } else { |
| 4047 | RETRY_IRQ_LEGACY: |
| 4048 | pr_err( |
| 4049 | "(%s): failed to enable MSI, re-trying with LEGACY %d\n", |
| 4050 | skd_name(skdev), rc); |
| 4051 | skdev->irq_type = SKD_IRQ_LEGACY; |
| 4052 | goto RETRY_IRQ_TYPE; |
| 4053 | } |
| 4054 | break; |
| 4055 | case SKD_IRQ_LEGACY: |
| 4056 | snprintf(skdev->isr_name, sizeof(skdev->isr_name), |
| 4057 | "%s%d-legacy", DRV_NAME, skdev->devno); |
| 4058 | rc = devm_request_irq(&pdev->dev, pdev->irq, skd_isr, |
| 4059 | IRQF_SHARED, skdev->isr_name, skdev); |
| 4060 | if (!rc) |
| 4061 | pr_info("(%s): LEGACY irq %d enabled\n", |
| 4062 | skd_name(skdev), pdev->irq); |
| 4063 | else |
| 4064 | pr_err("(%s): request LEGACY irq error %d\n", |
| 4065 | skd_name(skdev), rc); |
| 4066 | break; |
| 4067 | default: |
| 4068 | pr_info("(%s): irq_type %d invalid, re-set to %d\n", |
| 4069 | skd_name(skdev), skdev->irq_type, SKD_IRQ_DEFAULT); |
| 4070 | skdev->irq_type = SKD_IRQ_LEGACY; |
| 4071 | goto RETRY_IRQ_TYPE; |
| 4072 | } |
| 4073 | return rc; |
| 4074 | } |
| 4075 | |
| 4076 | static void skd_release_irq(struct skd_device *skdev) |
| 4077 | { |
| 4078 | switch (skdev->irq_type) { |
| 4079 | case SKD_IRQ_MSIX: |
| 4080 | skd_release_msix(skdev); |
| 4081 | break; |
| 4082 | case SKD_IRQ_MSI: |
| 4083 | devm_free_irq(&skdev->pdev->dev, skdev->pdev->irq, skdev); |
| 4084 | pci_disable_msi(skdev->pdev); |
| 4085 | break; |
| 4086 | case SKD_IRQ_LEGACY: |
| 4087 | devm_free_irq(&skdev->pdev->dev, skdev->pdev->irq, skdev); |
| 4088 | break; |
| 4089 | default: |
| 4090 | pr_err("(%s): wrong irq type %d!", |
| 4091 | skd_name(skdev), skdev->irq_type); |
| 4092 | break; |
| 4093 | } |
| 4094 | } |
| 4095 | |
| 4096 | /* |
| 4097 | ***************************************************************************** |
| 4098 | * CONSTRUCT |
| 4099 | ***************************************************************************** |
| 4100 | */ |
| 4101 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4102 | static int skd_cons_skcomp(struct skd_device *skdev) |
| 4103 | { |
| 4104 | int rc = 0; |
| 4105 | struct fit_completion_entry_v1 *skcomp; |
| 4106 | u32 nbytes; |
| 4107 | |
| 4108 | nbytes = sizeof(*skcomp) * SKD_N_COMPLETION_ENTRY; |
| 4109 | nbytes += sizeof(struct fit_comp_error_info) * SKD_N_COMPLETION_ENTRY; |
| 4110 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 4111 | pr_debug("%s:%s:%d comp pci_alloc, total bytes %d entries %d\n", |
| 4112 | skdev->name, __func__, __LINE__, |
| 4113 | nbytes, SKD_N_COMPLETION_ENTRY); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4114 | |
Joe Perches | a5bbf61 | 2014-08-08 14:24:12 -0700 | [diff] [blame] | 4115 | skcomp = pci_zalloc_consistent(skdev->pdev, nbytes, |
| 4116 | &skdev->cq_dma_address); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4117 | |
| 4118 | if (skcomp == NULL) { |
| 4119 | rc = -ENOMEM; |
| 4120 | goto err_out; |
| 4121 | } |
| 4122 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4123 | skdev->skcomp_table = skcomp; |
| 4124 | skdev->skerr_table = (struct fit_comp_error_info *)((char *)skcomp + |
| 4125 | sizeof(*skcomp) * |
| 4126 | SKD_N_COMPLETION_ENTRY); |
| 4127 | |
| 4128 | err_out: |
| 4129 | return rc; |
| 4130 | } |
| 4131 | |
| 4132 | static int skd_cons_skmsg(struct skd_device *skdev) |
| 4133 | { |
| 4134 | int rc = 0; |
| 4135 | u32 i; |
| 4136 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 4137 | pr_debug("%s:%s:%d skmsg_table kzalloc, struct %lu, count %u total %lu\n", |
| 4138 | skdev->name, __func__, __LINE__, |
| 4139 | sizeof(struct skd_fitmsg_context), |
| 4140 | skdev->num_fitmsg_context, |
| 4141 | sizeof(struct skd_fitmsg_context) * skdev->num_fitmsg_context); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4142 | |
| 4143 | skdev->skmsg_table = kzalloc(sizeof(struct skd_fitmsg_context) |
| 4144 | *skdev->num_fitmsg_context, GFP_KERNEL); |
| 4145 | if (skdev->skmsg_table == NULL) { |
| 4146 | rc = -ENOMEM; |
| 4147 | goto err_out; |
| 4148 | } |
| 4149 | |
| 4150 | for (i = 0; i < skdev->num_fitmsg_context; i++) { |
| 4151 | struct skd_fitmsg_context *skmsg; |
| 4152 | |
| 4153 | skmsg = &skdev->skmsg_table[i]; |
| 4154 | |
| 4155 | skmsg->id = i + SKD_ID_FIT_MSG; |
| 4156 | |
| 4157 | skmsg->state = SKD_MSG_STATE_IDLE; |
| 4158 | skmsg->msg_buf = pci_alloc_consistent(skdev->pdev, |
| 4159 | SKD_N_FITMSG_BYTES + 64, |
| 4160 | &skmsg->mb_dma_address); |
| 4161 | |
| 4162 | if (skmsg->msg_buf == NULL) { |
| 4163 | rc = -ENOMEM; |
| 4164 | goto err_out; |
| 4165 | } |
| 4166 | |
| 4167 | skmsg->offset = (u32)((u64)skmsg->msg_buf & |
| 4168 | (~FIT_QCMD_BASE_ADDRESS_MASK)); |
| 4169 | skmsg->msg_buf += ~FIT_QCMD_BASE_ADDRESS_MASK; |
| 4170 | skmsg->msg_buf = (u8 *)((u64)skmsg->msg_buf & |
| 4171 | FIT_QCMD_BASE_ADDRESS_MASK); |
| 4172 | skmsg->mb_dma_address += ~FIT_QCMD_BASE_ADDRESS_MASK; |
| 4173 | skmsg->mb_dma_address &= FIT_QCMD_BASE_ADDRESS_MASK; |
| 4174 | memset(skmsg->msg_buf, 0, SKD_N_FITMSG_BYTES); |
| 4175 | |
| 4176 | skmsg->next = &skmsg[1]; |
| 4177 | } |
| 4178 | |
| 4179 | /* Free list is in order starting with the 0th entry. */ |
| 4180 | skdev->skmsg_table[i - 1].next = NULL; |
| 4181 | skdev->skmsg_free_list = skdev->skmsg_table; |
| 4182 | |
| 4183 | err_out: |
| 4184 | return rc; |
| 4185 | } |
| 4186 | |
Bartlomiej Zolnierkiewicz | 542d7b0 | 2013-11-05 12:37:08 +0100 | [diff] [blame] | 4187 | static struct fit_sg_descriptor *skd_cons_sg_list(struct skd_device *skdev, |
| 4188 | u32 n_sg, |
| 4189 | dma_addr_t *ret_dma_addr) |
| 4190 | { |
| 4191 | struct fit_sg_descriptor *sg_list; |
| 4192 | u32 nbytes; |
| 4193 | |
| 4194 | nbytes = sizeof(*sg_list) * n_sg; |
| 4195 | |
| 4196 | sg_list = pci_alloc_consistent(skdev->pdev, nbytes, ret_dma_addr); |
| 4197 | |
| 4198 | if (sg_list != NULL) { |
| 4199 | uint64_t dma_address = *ret_dma_addr; |
| 4200 | u32 i; |
| 4201 | |
| 4202 | memset(sg_list, 0, nbytes); |
| 4203 | |
| 4204 | for (i = 0; i < n_sg - 1; i++) { |
| 4205 | uint64_t ndp_off; |
| 4206 | ndp_off = (i + 1) * sizeof(struct fit_sg_descriptor); |
| 4207 | |
| 4208 | sg_list[i].next_desc_ptr = dma_address + ndp_off; |
| 4209 | } |
| 4210 | sg_list[i].next_desc_ptr = 0LL; |
| 4211 | } |
| 4212 | |
| 4213 | return sg_list; |
| 4214 | } |
| 4215 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4216 | static int skd_cons_skreq(struct skd_device *skdev) |
| 4217 | { |
| 4218 | int rc = 0; |
| 4219 | u32 i; |
| 4220 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 4221 | pr_debug("%s:%s:%d skreq_table kzalloc, struct %lu, count %u total %lu\n", |
| 4222 | skdev->name, __func__, __LINE__, |
| 4223 | sizeof(struct skd_request_context), |
| 4224 | skdev->num_req_context, |
| 4225 | sizeof(struct skd_request_context) * skdev->num_req_context); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4226 | |
| 4227 | skdev->skreq_table = kzalloc(sizeof(struct skd_request_context) |
| 4228 | * skdev->num_req_context, GFP_KERNEL); |
| 4229 | if (skdev->skreq_table == NULL) { |
| 4230 | rc = -ENOMEM; |
| 4231 | goto err_out; |
| 4232 | } |
| 4233 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 4234 | pr_debug("%s:%s:%d alloc sg_table sg_per_req %u scatlist %lu total %lu\n", |
| 4235 | skdev->name, __func__, __LINE__, |
| 4236 | skdev->sgs_per_request, sizeof(struct scatterlist), |
| 4237 | skdev->sgs_per_request * sizeof(struct scatterlist)); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4238 | |
| 4239 | for (i = 0; i < skdev->num_req_context; i++) { |
| 4240 | struct skd_request_context *skreq; |
| 4241 | |
| 4242 | skreq = &skdev->skreq_table[i]; |
| 4243 | |
| 4244 | skreq->id = i + SKD_ID_RW_REQUEST; |
| 4245 | skreq->state = SKD_REQ_STATE_IDLE; |
| 4246 | |
| 4247 | skreq->sg = kzalloc(sizeof(struct scatterlist) * |
| 4248 | skdev->sgs_per_request, GFP_KERNEL); |
| 4249 | if (skreq->sg == NULL) { |
| 4250 | rc = -ENOMEM; |
| 4251 | goto err_out; |
| 4252 | } |
| 4253 | sg_init_table(skreq->sg, skdev->sgs_per_request); |
| 4254 | |
| 4255 | skreq->sksg_list = skd_cons_sg_list(skdev, |
| 4256 | skdev->sgs_per_request, |
| 4257 | &skreq->sksg_dma_address); |
| 4258 | |
| 4259 | if (skreq->sksg_list == NULL) { |
| 4260 | rc = -ENOMEM; |
| 4261 | goto err_out; |
| 4262 | } |
| 4263 | |
| 4264 | skreq->next = &skreq[1]; |
| 4265 | } |
| 4266 | |
| 4267 | /* Free list is in order starting with the 0th entry. */ |
| 4268 | skdev->skreq_table[i - 1].next = NULL; |
| 4269 | skdev->skreq_free_list = skdev->skreq_table; |
| 4270 | |
| 4271 | err_out: |
| 4272 | return rc; |
| 4273 | } |
| 4274 | |
| 4275 | static int skd_cons_skspcl(struct skd_device *skdev) |
| 4276 | { |
| 4277 | int rc = 0; |
| 4278 | u32 i, nbytes; |
| 4279 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 4280 | pr_debug("%s:%s:%d skspcl_table kzalloc, struct %lu, count %u total %lu\n", |
| 4281 | skdev->name, __func__, __LINE__, |
| 4282 | sizeof(struct skd_special_context), |
| 4283 | skdev->n_special, |
| 4284 | sizeof(struct skd_special_context) * skdev->n_special); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4285 | |
| 4286 | skdev->skspcl_table = kzalloc(sizeof(struct skd_special_context) |
| 4287 | * skdev->n_special, GFP_KERNEL); |
| 4288 | if (skdev->skspcl_table == NULL) { |
| 4289 | rc = -ENOMEM; |
| 4290 | goto err_out; |
| 4291 | } |
| 4292 | |
| 4293 | for (i = 0; i < skdev->n_special; i++) { |
| 4294 | struct skd_special_context *skspcl; |
| 4295 | |
| 4296 | skspcl = &skdev->skspcl_table[i]; |
| 4297 | |
| 4298 | skspcl->req.id = i + SKD_ID_SPECIAL_REQUEST; |
| 4299 | skspcl->req.state = SKD_REQ_STATE_IDLE; |
| 4300 | |
| 4301 | skspcl->req.next = &skspcl[1].req; |
| 4302 | |
| 4303 | nbytes = SKD_N_SPECIAL_FITMSG_BYTES; |
| 4304 | |
Joe Perches | a5bbf61 | 2014-08-08 14:24:12 -0700 | [diff] [blame] | 4305 | skspcl->msg_buf = |
| 4306 | pci_zalloc_consistent(skdev->pdev, nbytes, |
| 4307 | &skspcl->mb_dma_address); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4308 | if (skspcl->msg_buf == NULL) { |
| 4309 | rc = -ENOMEM; |
| 4310 | goto err_out; |
| 4311 | } |
| 4312 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4313 | skspcl->req.sg = kzalloc(sizeof(struct scatterlist) * |
| 4314 | SKD_N_SG_PER_SPECIAL, GFP_KERNEL); |
| 4315 | if (skspcl->req.sg == NULL) { |
| 4316 | rc = -ENOMEM; |
| 4317 | goto err_out; |
| 4318 | } |
| 4319 | |
| 4320 | skspcl->req.sksg_list = skd_cons_sg_list(skdev, |
| 4321 | SKD_N_SG_PER_SPECIAL, |
| 4322 | &skspcl->req. |
| 4323 | sksg_dma_address); |
| 4324 | if (skspcl->req.sksg_list == NULL) { |
| 4325 | rc = -ENOMEM; |
| 4326 | goto err_out; |
| 4327 | } |
| 4328 | } |
| 4329 | |
| 4330 | /* Free list is in order starting with the 0th entry. */ |
| 4331 | skdev->skspcl_table[i - 1].req.next = NULL; |
| 4332 | skdev->skspcl_free_list = skdev->skspcl_table; |
| 4333 | |
| 4334 | return rc; |
| 4335 | |
| 4336 | err_out: |
| 4337 | return rc; |
| 4338 | } |
| 4339 | |
| 4340 | static int skd_cons_sksb(struct skd_device *skdev) |
| 4341 | { |
| 4342 | int rc = 0; |
| 4343 | struct skd_special_context *skspcl; |
| 4344 | u32 nbytes; |
| 4345 | |
| 4346 | skspcl = &skdev->internal_skspcl; |
| 4347 | |
| 4348 | skspcl->req.id = 0 + SKD_ID_INTERNAL; |
| 4349 | skspcl->req.state = SKD_REQ_STATE_IDLE; |
| 4350 | |
| 4351 | nbytes = SKD_N_INTERNAL_BYTES; |
| 4352 | |
Joe Perches | a5bbf61 | 2014-08-08 14:24:12 -0700 | [diff] [blame] | 4353 | skspcl->data_buf = pci_zalloc_consistent(skdev->pdev, nbytes, |
| 4354 | &skspcl->db_dma_address); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4355 | if (skspcl->data_buf == NULL) { |
| 4356 | rc = -ENOMEM; |
| 4357 | goto err_out; |
| 4358 | } |
| 4359 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4360 | nbytes = SKD_N_SPECIAL_FITMSG_BYTES; |
Joe Perches | a5bbf61 | 2014-08-08 14:24:12 -0700 | [diff] [blame] | 4361 | skspcl->msg_buf = pci_zalloc_consistent(skdev->pdev, nbytes, |
| 4362 | &skspcl->mb_dma_address); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4363 | if (skspcl->msg_buf == NULL) { |
| 4364 | rc = -ENOMEM; |
| 4365 | goto err_out; |
| 4366 | } |
| 4367 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4368 | skspcl->req.sksg_list = skd_cons_sg_list(skdev, 1, |
| 4369 | &skspcl->req.sksg_dma_address); |
| 4370 | if (skspcl->req.sksg_list == NULL) { |
| 4371 | rc = -ENOMEM; |
| 4372 | goto err_out; |
| 4373 | } |
| 4374 | |
| 4375 | if (!skd_format_internal_skspcl(skdev)) { |
| 4376 | rc = -EINVAL; |
| 4377 | goto err_out; |
| 4378 | } |
| 4379 | |
| 4380 | err_out: |
| 4381 | return rc; |
| 4382 | } |
| 4383 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4384 | static int skd_cons_disk(struct skd_device *skdev) |
| 4385 | { |
| 4386 | int rc = 0; |
| 4387 | struct gendisk *disk; |
| 4388 | struct request_queue *q; |
| 4389 | unsigned long flags; |
| 4390 | |
| 4391 | disk = alloc_disk(SKD_MINORS_PER_DEVICE); |
| 4392 | if (!disk) { |
| 4393 | rc = -ENOMEM; |
| 4394 | goto err_out; |
| 4395 | } |
| 4396 | |
| 4397 | skdev->disk = disk; |
| 4398 | sprintf(disk->disk_name, DRV_NAME "%u", skdev->devno); |
| 4399 | |
| 4400 | disk->major = skdev->major; |
| 4401 | disk->first_minor = skdev->devno * SKD_MINORS_PER_DEVICE; |
| 4402 | disk->fops = &skd_blockdev_ops; |
| 4403 | disk->private_data = skdev; |
| 4404 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 4405 | q = blk_init_queue(skd_request_fn, &skdev->lock); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4406 | if (!q) { |
| 4407 | rc = -ENOMEM; |
| 4408 | goto err_out; |
| 4409 | } |
| 4410 | |
| 4411 | skdev->queue = q; |
| 4412 | disk->queue = q; |
| 4413 | q->queuedata = skdev; |
| 4414 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4415 | blk_queue_flush(q, REQ_FLUSH | REQ_FUA); |
| 4416 | blk_queue_max_segments(q, skdev->sgs_per_request); |
| 4417 | blk_queue_max_hw_sectors(q, SKD_N_MAX_SECTORS); |
| 4418 | |
| 4419 | /* set sysfs ptimal_io_size to 8K */ |
| 4420 | blk_queue_io_opt(q, 8192); |
| 4421 | |
| 4422 | /* DISCARD Flag initialization. */ |
| 4423 | q->limits.discard_granularity = 8192; |
| 4424 | q->limits.discard_alignment = 0; |
| 4425 | q->limits.max_discard_sectors = UINT_MAX >> 9; |
| 4426 | q->limits.discard_zeroes_data = 1; |
| 4427 | queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); |
| 4428 | queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q); |
Mike Snitzer | b277da0 | 2014-10-04 10:55:32 -0600 | [diff] [blame] | 4429 | queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4430 | |
| 4431 | spin_lock_irqsave(&skdev->lock, flags); |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 4432 | pr_debug("%s:%s:%d stopping %s queue\n", |
| 4433 | skdev->name, __func__, __LINE__, skdev->name); |
Jens Axboe | 6a5ec65 | 2013-11-01 10:38:45 -0600 | [diff] [blame] | 4434 | blk_stop_queue(skdev->queue); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4435 | spin_unlock_irqrestore(&skdev->lock, flags); |
| 4436 | |
| 4437 | err_out: |
| 4438 | return rc; |
| 4439 | } |
| 4440 | |
Bartlomiej Zolnierkiewicz | 542d7b0 | 2013-11-05 12:37:08 +0100 | [diff] [blame] | 4441 | #define SKD_N_DEV_TABLE 16u |
| 4442 | static u32 skd_next_devno; |
| 4443 | |
| 4444 | static struct skd_device *skd_construct(struct pci_dev *pdev) |
| 4445 | { |
| 4446 | struct skd_device *skdev; |
| 4447 | int blk_major = skd_major; |
| 4448 | int rc; |
| 4449 | |
| 4450 | skdev = kzalloc(sizeof(*skdev), GFP_KERNEL); |
| 4451 | |
| 4452 | if (!skdev) { |
| 4453 | pr_err(PFX "(%s): memory alloc failure\n", |
| 4454 | pci_name(pdev)); |
| 4455 | return NULL; |
| 4456 | } |
| 4457 | |
| 4458 | skdev->state = SKD_DRVR_STATE_LOAD; |
| 4459 | skdev->pdev = pdev; |
| 4460 | skdev->devno = skd_next_devno++; |
| 4461 | skdev->major = blk_major; |
| 4462 | skdev->irq_type = skd_isr_type; |
| 4463 | sprintf(skdev->name, DRV_NAME "%d", skdev->devno); |
| 4464 | skdev->dev_max_queue_depth = 0; |
| 4465 | |
| 4466 | skdev->num_req_context = skd_max_queue_depth; |
| 4467 | skdev->num_fitmsg_context = skd_max_queue_depth; |
| 4468 | skdev->n_special = skd_max_pass_thru; |
| 4469 | skdev->cur_max_queue_depth = 1; |
| 4470 | skdev->queue_low_water_mark = 1; |
| 4471 | skdev->proto_ver = 99; |
| 4472 | skdev->sgs_per_request = skd_sgs_per_request; |
| 4473 | skdev->dbg_level = skd_dbg_level; |
| 4474 | |
| 4475 | atomic_set(&skdev->device_count, 0); |
| 4476 | |
| 4477 | spin_lock_init(&skdev->lock); |
| 4478 | |
| 4479 | INIT_WORK(&skdev->completion_worker, skd_completion_worker); |
| 4480 | |
| 4481 | pr_debug("%s:%s:%d skcomp\n", skdev->name, __func__, __LINE__); |
| 4482 | rc = skd_cons_skcomp(skdev); |
| 4483 | if (rc < 0) |
| 4484 | goto err_out; |
| 4485 | |
| 4486 | pr_debug("%s:%s:%d skmsg\n", skdev->name, __func__, __LINE__); |
| 4487 | rc = skd_cons_skmsg(skdev); |
| 4488 | if (rc < 0) |
| 4489 | goto err_out; |
| 4490 | |
| 4491 | pr_debug("%s:%s:%d skreq\n", skdev->name, __func__, __LINE__); |
| 4492 | rc = skd_cons_skreq(skdev); |
| 4493 | if (rc < 0) |
| 4494 | goto err_out; |
| 4495 | |
| 4496 | pr_debug("%s:%s:%d skspcl\n", skdev->name, __func__, __LINE__); |
| 4497 | rc = skd_cons_skspcl(skdev); |
| 4498 | if (rc < 0) |
| 4499 | goto err_out; |
| 4500 | |
| 4501 | pr_debug("%s:%s:%d sksb\n", skdev->name, __func__, __LINE__); |
| 4502 | rc = skd_cons_sksb(skdev); |
| 4503 | if (rc < 0) |
| 4504 | goto err_out; |
| 4505 | |
| 4506 | pr_debug("%s:%s:%d disk\n", skdev->name, __func__, __LINE__); |
| 4507 | rc = skd_cons_disk(skdev); |
| 4508 | if (rc < 0) |
| 4509 | goto err_out; |
| 4510 | |
| 4511 | pr_debug("%s:%s:%d VICTORY\n", skdev->name, __func__, __LINE__); |
| 4512 | return skdev; |
| 4513 | |
| 4514 | err_out: |
| 4515 | pr_debug("%s:%s:%d construct failed\n", |
| 4516 | skdev->name, __func__, __LINE__); |
| 4517 | skd_destruct(skdev); |
| 4518 | return NULL; |
| 4519 | } |
| 4520 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4521 | /* |
| 4522 | ***************************************************************************** |
| 4523 | * DESTRUCT (FREE) |
| 4524 | ***************************************************************************** |
| 4525 | */ |
| 4526 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4527 | static void skd_free_skcomp(struct skd_device *skdev) |
| 4528 | { |
| 4529 | if (skdev->skcomp_table != NULL) { |
| 4530 | u32 nbytes; |
| 4531 | |
| 4532 | nbytes = sizeof(skdev->skcomp_table[0]) * |
| 4533 | SKD_N_COMPLETION_ENTRY; |
| 4534 | pci_free_consistent(skdev->pdev, nbytes, |
| 4535 | skdev->skcomp_table, skdev->cq_dma_address); |
| 4536 | } |
| 4537 | |
| 4538 | skdev->skcomp_table = NULL; |
| 4539 | skdev->cq_dma_address = 0; |
| 4540 | } |
| 4541 | |
| 4542 | static void skd_free_skmsg(struct skd_device *skdev) |
| 4543 | { |
| 4544 | u32 i; |
| 4545 | |
| 4546 | if (skdev->skmsg_table == NULL) |
| 4547 | return; |
| 4548 | |
| 4549 | for (i = 0; i < skdev->num_fitmsg_context; i++) { |
| 4550 | struct skd_fitmsg_context *skmsg; |
| 4551 | |
| 4552 | skmsg = &skdev->skmsg_table[i]; |
| 4553 | |
| 4554 | if (skmsg->msg_buf != NULL) { |
| 4555 | skmsg->msg_buf += skmsg->offset; |
| 4556 | skmsg->mb_dma_address += skmsg->offset; |
| 4557 | pci_free_consistent(skdev->pdev, SKD_N_FITMSG_BYTES, |
| 4558 | skmsg->msg_buf, |
| 4559 | skmsg->mb_dma_address); |
| 4560 | } |
| 4561 | skmsg->msg_buf = NULL; |
| 4562 | skmsg->mb_dma_address = 0; |
| 4563 | } |
| 4564 | |
| 4565 | kfree(skdev->skmsg_table); |
| 4566 | skdev->skmsg_table = NULL; |
| 4567 | } |
| 4568 | |
Bartlomiej Zolnierkiewicz | 542d7b0 | 2013-11-05 12:37:08 +0100 | [diff] [blame] | 4569 | static void skd_free_sg_list(struct skd_device *skdev, |
| 4570 | struct fit_sg_descriptor *sg_list, |
| 4571 | u32 n_sg, dma_addr_t dma_addr) |
| 4572 | { |
| 4573 | if (sg_list != NULL) { |
| 4574 | u32 nbytes; |
| 4575 | |
| 4576 | nbytes = sizeof(*sg_list) * n_sg; |
| 4577 | |
| 4578 | pci_free_consistent(skdev->pdev, nbytes, sg_list, dma_addr); |
| 4579 | } |
| 4580 | } |
| 4581 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4582 | static void skd_free_skreq(struct skd_device *skdev) |
| 4583 | { |
| 4584 | u32 i; |
| 4585 | |
| 4586 | if (skdev->skreq_table == NULL) |
| 4587 | return; |
| 4588 | |
| 4589 | for (i = 0; i < skdev->num_req_context; i++) { |
| 4590 | struct skd_request_context *skreq; |
| 4591 | |
| 4592 | skreq = &skdev->skreq_table[i]; |
| 4593 | |
| 4594 | skd_free_sg_list(skdev, skreq->sksg_list, |
| 4595 | skdev->sgs_per_request, |
| 4596 | skreq->sksg_dma_address); |
| 4597 | |
| 4598 | skreq->sksg_list = NULL; |
| 4599 | skreq->sksg_dma_address = 0; |
| 4600 | |
| 4601 | kfree(skreq->sg); |
| 4602 | } |
| 4603 | |
| 4604 | kfree(skdev->skreq_table); |
| 4605 | skdev->skreq_table = NULL; |
| 4606 | } |
| 4607 | |
| 4608 | static void skd_free_skspcl(struct skd_device *skdev) |
| 4609 | { |
| 4610 | u32 i; |
| 4611 | u32 nbytes; |
| 4612 | |
| 4613 | if (skdev->skspcl_table == NULL) |
| 4614 | return; |
| 4615 | |
| 4616 | for (i = 0; i < skdev->n_special; i++) { |
| 4617 | struct skd_special_context *skspcl; |
| 4618 | |
| 4619 | skspcl = &skdev->skspcl_table[i]; |
| 4620 | |
| 4621 | if (skspcl->msg_buf != NULL) { |
| 4622 | nbytes = SKD_N_SPECIAL_FITMSG_BYTES; |
| 4623 | pci_free_consistent(skdev->pdev, nbytes, |
| 4624 | skspcl->msg_buf, |
| 4625 | skspcl->mb_dma_address); |
| 4626 | } |
| 4627 | |
| 4628 | skspcl->msg_buf = NULL; |
| 4629 | skspcl->mb_dma_address = 0; |
| 4630 | |
| 4631 | skd_free_sg_list(skdev, skspcl->req.sksg_list, |
| 4632 | SKD_N_SG_PER_SPECIAL, |
| 4633 | skspcl->req.sksg_dma_address); |
| 4634 | |
| 4635 | skspcl->req.sksg_list = NULL; |
| 4636 | skspcl->req.sksg_dma_address = 0; |
| 4637 | |
| 4638 | kfree(skspcl->req.sg); |
| 4639 | } |
| 4640 | |
| 4641 | kfree(skdev->skspcl_table); |
| 4642 | skdev->skspcl_table = NULL; |
| 4643 | } |
| 4644 | |
| 4645 | static void skd_free_sksb(struct skd_device *skdev) |
| 4646 | { |
| 4647 | struct skd_special_context *skspcl; |
| 4648 | u32 nbytes; |
| 4649 | |
| 4650 | skspcl = &skdev->internal_skspcl; |
| 4651 | |
| 4652 | if (skspcl->data_buf != NULL) { |
| 4653 | nbytes = SKD_N_INTERNAL_BYTES; |
| 4654 | |
| 4655 | pci_free_consistent(skdev->pdev, nbytes, |
| 4656 | skspcl->data_buf, skspcl->db_dma_address); |
| 4657 | } |
| 4658 | |
| 4659 | skspcl->data_buf = NULL; |
| 4660 | skspcl->db_dma_address = 0; |
| 4661 | |
| 4662 | if (skspcl->msg_buf != NULL) { |
| 4663 | nbytes = SKD_N_SPECIAL_FITMSG_BYTES; |
| 4664 | pci_free_consistent(skdev->pdev, nbytes, |
| 4665 | skspcl->msg_buf, skspcl->mb_dma_address); |
| 4666 | } |
| 4667 | |
| 4668 | skspcl->msg_buf = NULL; |
| 4669 | skspcl->mb_dma_address = 0; |
| 4670 | |
| 4671 | skd_free_sg_list(skdev, skspcl->req.sksg_list, 1, |
| 4672 | skspcl->req.sksg_dma_address); |
| 4673 | |
| 4674 | skspcl->req.sksg_list = NULL; |
| 4675 | skspcl->req.sksg_dma_address = 0; |
| 4676 | } |
| 4677 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4678 | static void skd_free_disk(struct skd_device *skdev) |
| 4679 | { |
| 4680 | struct gendisk *disk = skdev->disk; |
| 4681 | |
| 4682 | if (disk != NULL) { |
| 4683 | struct request_queue *q = disk->queue; |
| 4684 | |
| 4685 | if (disk->flags & GENHD_FL_UP) |
| 4686 | del_gendisk(disk); |
| 4687 | if (q) |
| 4688 | blk_cleanup_queue(q); |
| 4689 | put_disk(disk); |
| 4690 | } |
| 4691 | skdev->disk = NULL; |
| 4692 | } |
| 4693 | |
Bartlomiej Zolnierkiewicz | 542d7b0 | 2013-11-05 12:37:08 +0100 | [diff] [blame] | 4694 | static void skd_destruct(struct skd_device *skdev) |
| 4695 | { |
| 4696 | if (skdev == NULL) |
| 4697 | return; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4698 | |
| 4699 | |
Bartlomiej Zolnierkiewicz | 542d7b0 | 2013-11-05 12:37:08 +0100 | [diff] [blame] | 4700 | pr_debug("%s:%s:%d disk\n", skdev->name, __func__, __LINE__); |
| 4701 | skd_free_disk(skdev); |
| 4702 | |
| 4703 | pr_debug("%s:%s:%d sksb\n", skdev->name, __func__, __LINE__); |
| 4704 | skd_free_sksb(skdev); |
| 4705 | |
| 4706 | pr_debug("%s:%s:%d skspcl\n", skdev->name, __func__, __LINE__); |
| 4707 | skd_free_skspcl(skdev); |
| 4708 | |
| 4709 | pr_debug("%s:%s:%d skreq\n", skdev->name, __func__, __LINE__); |
| 4710 | skd_free_skreq(skdev); |
| 4711 | |
| 4712 | pr_debug("%s:%s:%d skmsg\n", skdev->name, __func__, __LINE__); |
| 4713 | skd_free_skmsg(skdev); |
| 4714 | |
| 4715 | pr_debug("%s:%s:%d skcomp\n", skdev->name, __func__, __LINE__); |
| 4716 | skd_free_skcomp(skdev); |
| 4717 | |
| 4718 | pr_debug("%s:%s:%d skdev\n", skdev->name, __func__, __LINE__); |
| 4719 | kfree(skdev); |
| 4720 | } |
| 4721 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4722 | /* |
| 4723 | ***************************************************************************** |
| 4724 | * BLOCK DEVICE (BDEV) GLUE |
| 4725 | ***************************************************************************** |
| 4726 | */ |
| 4727 | |
| 4728 | static int skd_bdev_getgeo(struct block_device *bdev, struct hd_geometry *geo) |
| 4729 | { |
| 4730 | struct skd_device *skdev; |
| 4731 | u64 capacity; |
| 4732 | |
| 4733 | skdev = bdev->bd_disk->private_data; |
| 4734 | |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 4735 | pr_debug("%s:%s:%d %s: CMD[%s] getgeo device\n", |
| 4736 | skdev->name, __func__, __LINE__, |
| 4737 | bdev->bd_disk->disk_name, current->comm); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4738 | |
| 4739 | if (skdev->read_cap_is_valid) { |
| 4740 | capacity = get_capacity(skdev->disk); |
| 4741 | geo->heads = 64; |
| 4742 | geo->sectors = 255; |
| 4743 | geo->cylinders = (capacity) / (255 * 64); |
| 4744 | |
| 4745 | return 0; |
| 4746 | } |
| 4747 | return -EIO; |
| 4748 | } |
| 4749 | |
| 4750 | static int skd_bdev_attach(struct skd_device *skdev) |
| 4751 | { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 4752 | pr_debug("%s:%s:%d add_disk\n", skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4753 | add_disk(skdev->disk); |
| 4754 | return 0; |
| 4755 | } |
| 4756 | |
| 4757 | static const struct block_device_operations skd_blockdev_ops = { |
| 4758 | .owner = THIS_MODULE, |
| 4759 | .ioctl = skd_bdev_ioctl, |
| 4760 | .getgeo = skd_bdev_getgeo, |
| 4761 | }; |
| 4762 | |
| 4763 | |
| 4764 | /* |
| 4765 | ***************************************************************************** |
| 4766 | * PCIe DRIVER GLUE |
| 4767 | ***************************************************************************** |
| 4768 | */ |
| 4769 | |
Benoit Taine | 9baa3c3 | 2014-08-08 15:56:03 +0200 | [diff] [blame] | 4770 | static const struct pci_device_id skd_pci_tbl[] = { |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4771 | { PCI_VENDOR_ID_STEC, PCI_DEVICE_ID_S1120, |
| 4772 | PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, |
| 4773 | { 0 } /* terminate list */ |
| 4774 | }; |
| 4775 | |
| 4776 | MODULE_DEVICE_TABLE(pci, skd_pci_tbl); |
| 4777 | |
| 4778 | static char *skd_pci_info(struct skd_device *skdev, char *str) |
| 4779 | { |
| 4780 | int pcie_reg; |
| 4781 | |
| 4782 | strcpy(str, "PCIe ("); |
| 4783 | pcie_reg = pci_find_capability(skdev->pdev, PCI_CAP_ID_EXP); |
| 4784 | |
| 4785 | if (pcie_reg) { |
| 4786 | |
| 4787 | char lwstr[6]; |
| 4788 | uint16_t pcie_lstat, lspeed, lwidth; |
| 4789 | |
| 4790 | pcie_reg += 0x12; |
| 4791 | pci_read_config_word(skdev->pdev, pcie_reg, &pcie_lstat); |
| 4792 | lspeed = pcie_lstat & (0xF); |
| 4793 | lwidth = (pcie_lstat & 0x3F0) >> 4; |
| 4794 | |
| 4795 | if (lspeed == 1) |
| 4796 | strcat(str, "2.5GT/s "); |
| 4797 | else if (lspeed == 2) |
| 4798 | strcat(str, "5.0GT/s "); |
| 4799 | else |
| 4800 | strcat(str, "<unknown> "); |
| 4801 | snprintf(lwstr, sizeof(lwstr), "%dX)", lwidth); |
| 4802 | strcat(str, lwstr); |
| 4803 | } |
| 4804 | return str; |
| 4805 | } |
| 4806 | |
| 4807 | static int skd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| 4808 | { |
| 4809 | int i; |
| 4810 | int rc = 0; |
| 4811 | char pci_str[32]; |
| 4812 | struct skd_device *skdev; |
| 4813 | |
| 4814 | pr_info("STEC s1120 Driver(%s) version %s-b%s\n", |
| 4815 | DRV_NAME, DRV_VERSION, DRV_BUILD_ID); |
| 4816 | pr_info("(skd?:??:[%s]): vendor=%04X device=%04x\n", |
| 4817 | pci_name(pdev), pdev->vendor, pdev->device); |
| 4818 | |
| 4819 | rc = pci_enable_device(pdev); |
| 4820 | if (rc) |
| 4821 | return rc; |
| 4822 | rc = pci_request_regions(pdev, DRV_NAME); |
| 4823 | if (rc) |
| 4824 | goto err_out; |
| 4825 | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); |
| 4826 | if (!rc) { |
| 4827 | if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { |
| 4828 | |
| 4829 | pr_err("(%s): consistent DMA mask error %d\n", |
| 4830 | pci_name(pdev), rc); |
| 4831 | } |
| 4832 | } else { |
| 4833 | (rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))); |
| 4834 | if (rc) { |
| 4835 | |
| 4836 | pr_err("(%s): DMA mask error %d\n", |
| 4837 | pci_name(pdev), rc); |
| 4838 | goto err_out_regions; |
| 4839 | } |
| 4840 | } |
| 4841 | |
Bartlomiej Zolnierkiewicz | b8df664 | 2013-11-05 12:37:02 +0100 | [diff] [blame] | 4842 | if (!skd_major) { |
| 4843 | rc = register_blkdev(0, DRV_NAME); |
| 4844 | if (rc < 0) |
| 4845 | goto err_out_regions; |
| 4846 | BUG_ON(!rc); |
| 4847 | skd_major = rc; |
| 4848 | } |
| 4849 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4850 | skdev = skd_construct(pdev); |
Wei Yongjun | 1762b57 | 2013-10-30 13:23:53 +0800 | [diff] [blame] | 4851 | if (skdev == NULL) { |
| 4852 | rc = -ENOMEM; |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4853 | goto err_out_regions; |
Wei Yongjun | 1762b57 | 2013-10-30 13:23:53 +0800 | [diff] [blame] | 4854 | } |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4855 | |
| 4856 | skd_pci_info(skdev, pci_str); |
| 4857 | pr_info("(%s): %s 64bit\n", skd_name(skdev), pci_str); |
| 4858 | |
| 4859 | pci_set_master(pdev); |
| 4860 | rc = pci_enable_pcie_error_reporting(pdev); |
| 4861 | if (rc) { |
| 4862 | pr_err( |
| 4863 | "(%s): bad enable of PCIe error reporting rc=%d\n", |
| 4864 | skd_name(skdev), rc); |
| 4865 | skdev->pcie_error_reporting_is_enabled = 0; |
| 4866 | } else |
| 4867 | skdev->pcie_error_reporting_is_enabled = 1; |
| 4868 | |
| 4869 | |
| 4870 | pci_set_drvdata(pdev, skdev); |
Bartlomiej Zolnierkiewicz | ebedd16 | 2013-11-05 12:37:05 +0100 | [diff] [blame] | 4871 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4872 | skdev->disk->driverfs_dev = &pdev->dev; |
| 4873 | |
| 4874 | for (i = 0; i < SKD_MAX_BARS; i++) { |
| 4875 | skdev->mem_phys[i] = pci_resource_start(pdev, i); |
| 4876 | skdev->mem_size[i] = (u32)pci_resource_len(pdev, i); |
| 4877 | skdev->mem_map[i] = ioremap(skdev->mem_phys[i], |
| 4878 | skdev->mem_size[i]); |
| 4879 | if (!skdev->mem_map[i]) { |
| 4880 | pr_err("(%s): Unable to map adapter memory!\n", |
| 4881 | skd_name(skdev)); |
| 4882 | rc = -ENODEV; |
| 4883 | goto err_out_iounmap; |
| 4884 | } |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 4885 | pr_debug("%s:%s:%d mem_map=%p, phyd=%016llx, size=%d\n", |
| 4886 | skdev->name, __func__, __LINE__, |
| 4887 | skdev->mem_map[i], |
| 4888 | (uint64_t)skdev->mem_phys[i], skdev->mem_size[i]); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 4889 | } |
| 4890 | |
| 4891 | rc = skd_acquire_irq(skdev); |
| 4892 | if (rc) { |
| 4893 | pr_err("(%s): interrupt resource error %d\n", |
| 4894 | skd_name(skdev), rc); |
| 4895 | goto err_out_iounmap; |
| 4896 | } |
| 4897 | |
| 4898 | rc = skd_start_timer(skdev); |
| 4899 | if (rc) |
| 4900 | goto err_out_timer; |
| 4901 | |
| 4902 | init_waitqueue_head(&skdev->waitq); |
| 4903 | |
| 4904 | skd_start_device(skdev); |
| 4905 | |
| 4906 | rc = wait_event_interruptible_timeout(skdev->waitq, |
| 4907 | (skdev->gendisk_on), |
| 4908 | (SKD_START_WAIT_SECONDS * HZ)); |
| 4909 | if (skdev->gendisk_on > 0) { |
| 4910 | /* device came on-line after reset */ |
| 4911 | skd_bdev_attach(skdev); |
| 4912 | rc = 0; |
| 4913 | } else { |
| 4914 | /* we timed out, something is wrong with the device, |
| 4915 | don't add the disk structure */ |
| 4916 | pr_err( |
| 4917 | "(%s): error: waiting for s1120 timed out %d!\n", |
| 4918 | skd_name(skdev), rc); |
| 4919 | /* in case of no error; we timeout with ENXIO */ |
| 4920 | if (!rc) |
| 4921 | rc = -ENXIO; |
| 4922 | goto err_out_timer; |
| 4923 | } |
| 4924 | |
| 4925 | |
| 4926 | #ifdef SKD_VMK_POLL_HANDLER |
| 4927 | if (skdev->irq_type == SKD_IRQ_MSIX) { |
| 4928 | /* MSIX completion handler is being used for coredump */ |
| 4929 | vmklnx_scsi_register_poll_handler(skdev->scsi_host, |
| 4930 | skdev->msix_entries[5].vector, |
| 4931 | skd_comp_q, skdev); |
| 4932 | } else { |
| 4933 | vmklnx_scsi_register_poll_handler(skdev->scsi_host, |
| 4934 | skdev->pdev->irq, skd_isr, |
| 4935 | skdev); |
| 4936 | } |
| 4937 | #endif /* SKD_VMK_POLL_HANDLER */ |
| 4938 | |
| 4939 | return rc; |
| 4940 | |
| 4941 | err_out_timer: |
| 4942 | skd_stop_device(skdev); |
| 4943 | skd_release_irq(skdev); |
| 4944 | |
| 4945 | err_out_iounmap: |
| 4946 | for (i = 0; i < SKD_MAX_BARS; i++) |
| 4947 | if (skdev->mem_map[i]) |
| 4948 | iounmap(skdev->mem_map[i]); |
| 4949 | |
| 4950 | if (skdev->pcie_error_reporting_is_enabled) |
| 4951 | pci_disable_pcie_error_reporting(pdev); |
| 4952 | |
| 4953 | skd_destruct(skdev); |
| 4954 | |
| 4955 | err_out_regions: |
| 4956 | pci_release_regions(pdev); |
| 4957 | |
| 4958 | err_out: |
| 4959 | pci_disable_device(pdev); |
| 4960 | pci_set_drvdata(pdev, NULL); |
| 4961 | return rc; |
| 4962 | } |
| 4963 | |
| 4964 | static void skd_pci_remove(struct pci_dev *pdev) |
| 4965 | { |
| 4966 | int i; |
| 4967 | struct skd_device *skdev; |
| 4968 | |
| 4969 | skdev = pci_get_drvdata(pdev); |
| 4970 | if (!skdev) { |
| 4971 | pr_err("%s: no device data for PCI\n", pci_name(pdev)); |
| 4972 | return; |
| 4973 | } |
| 4974 | skd_stop_device(skdev); |
| 4975 | skd_release_irq(skdev); |
| 4976 | |
| 4977 | for (i = 0; i < SKD_MAX_BARS; i++) |
| 4978 | if (skdev->mem_map[i]) |
| 4979 | iounmap((u32 *)skdev->mem_map[i]); |
| 4980 | |
| 4981 | if (skdev->pcie_error_reporting_is_enabled) |
| 4982 | pci_disable_pcie_error_reporting(pdev); |
| 4983 | |
| 4984 | skd_destruct(skdev); |
| 4985 | |
| 4986 | pci_release_regions(pdev); |
| 4987 | pci_disable_device(pdev); |
| 4988 | pci_set_drvdata(pdev, NULL); |
| 4989 | |
| 4990 | return; |
| 4991 | } |
| 4992 | |
| 4993 | static int skd_pci_suspend(struct pci_dev *pdev, pm_message_t state) |
| 4994 | { |
| 4995 | int i; |
| 4996 | struct skd_device *skdev; |
| 4997 | |
| 4998 | skdev = pci_get_drvdata(pdev); |
| 4999 | if (!skdev) { |
| 5000 | pr_err("%s: no device data for PCI\n", pci_name(pdev)); |
| 5001 | return -EIO; |
| 5002 | } |
| 5003 | |
| 5004 | skd_stop_device(skdev); |
| 5005 | |
| 5006 | skd_release_irq(skdev); |
| 5007 | |
| 5008 | for (i = 0; i < SKD_MAX_BARS; i++) |
| 5009 | if (skdev->mem_map[i]) |
| 5010 | iounmap((u32 *)skdev->mem_map[i]); |
| 5011 | |
| 5012 | if (skdev->pcie_error_reporting_is_enabled) |
| 5013 | pci_disable_pcie_error_reporting(pdev); |
| 5014 | |
| 5015 | pci_release_regions(pdev); |
| 5016 | pci_save_state(pdev); |
| 5017 | pci_disable_device(pdev); |
| 5018 | pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| 5019 | return 0; |
| 5020 | } |
| 5021 | |
| 5022 | static int skd_pci_resume(struct pci_dev *pdev) |
| 5023 | { |
| 5024 | int i; |
| 5025 | int rc = 0; |
| 5026 | struct skd_device *skdev; |
| 5027 | |
| 5028 | skdev = pci_get_drvdata(pdev); |
| 5029 | if (!skdev) { |
| 5030 | pr_err("%s: no device data for PCI\n", pci_name(pdev)); |
| 5031 | return -1; |
| 5032 | } |
| 5033 | |
| 5034 | pci_set_power_state(pdev, PCI_D0); |
| 5035 | pci_enable_wake(pdev, PCI_D0, 0); |
| 5036 | pci_restore_state(pdev); |
| 5037 | |
| 5038 | rc = pci_enable_device(pdev); |
| 5039 | if (rc) |
| 5040 | return rc; |
| 5041 | rc = pci_request_regions(pdev, DRV_NAME); |
| 5042 | if (rc) |
| 5043 | goto err_out; |
| 5044 | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); |
| 5045 | if (!rc) { |
| 5046 | if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { |
| 5047 | |
| 5048 | pr_err("(%s): consistent DMA mask error %d\n", |
| 5049 | pci_name(pdev), rc); |
| 5050 | } |
| 5051 | } else { |
| 5052 | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| 5053 | if (rc) { |
| 5054 | |
| 5055 | pr_err("(%s): DMA mask error %d\n", |
| 5056 | pci_name(pdev), rc); |
| 5057 | goto err_out_regions; |
| 5058 | } |
| 5059 | } |
| 5060 | |
| 5061 | pci_set_master(pdev); |
| 5062 | rc = pci_enable_pcie_error_reporting(pdev); |
| 5063 | if (rc) { |
| 5064 | pr_err("(%s): bad enable of PCIe error reporting rc=%d\n", |
| 5065 | skdev->name, rc); |
| 5066 | skdev->pcie_error_reporting_is_enabled = 0; |
| 5067 | } else |
| 5068 | skdev->pcie_error_reporting_is_enabled = 1; |
| 5069 | |
| 5070 | for (i = 0; i < SKD_MAX_BARS; i++) { |
| 5071 | |
| 5072 | skdev->mem_phys[i] = pci_resource_start(pdev, i); |
| 5073 | skdev->mem_size[i] = (u32)pci_resource_len(pdev, i); |
| 5074 | skdev->mem_map[i] = ioremap(skdev->mem_phys[i], |
| 5075 | skdev->mem_size[i]); |
| 5076 | if (!skdev->mem_map[i]) { |
| 5077 | pr_err("(%s): Unable to map adapter memory!\n", |
| 5078 | skd_name(skdev)); |
| 5079 | rc = -ENODEV; |
| 5080 | goto err_out_iounmap; |
| 5081 | } |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 5082 | pr_debug("%s:%s:%d mem_map=%p, phyd=%016llx, size=%d\n", |
| 5083 | skdev->name, __func__, __LINE__, |
| 5084 | skdev->mem_map[i], |
| 5085 | (uint64_t)skdev->mem_phys[i], skdev->mem_size[i]); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5086 | } |
| 5087 | rc = skd_acquire_irq(skdev); |
| 5088 | if (rc) { |
| 5089 | |
| 5090 | pr_err("(%s): interrupt resource error %d\n", |
| 5091 | pci_name(pdev), rc); |
| 5092 | goto err_out_iounmap; |
| 5093 | } |
| 5094 | |
| 5095 | rc = skd_start_timer(skdev); |
| 5096 | if (rc) |
| 5097 | goto err_out_timer; |
| 5098 | |
| 5099 | init_waitqueue_head(&skdev->waitq); |
| 5100 | |
| 5101 | skd_start_device(skdev); |
| 5102 | |
| 5103 | return rc; |
| 5104 | |
| 5105 | err_out_timer: |
| 5106 | skd_stop_device(skdev); |
| 5107 | skd_release_irq(skdev); |
| 5108 | |
| 5109 | err_out_iounmap: |
| 5110 | for (i = 0; i < SKD_MAX_BARS; i++) |
| 5111 | if (skdev->mem_map[i]) |
| 5112 | iounmap(skdev->mem_map[i]); |
| 5113 | |
| 5114 | if (skdev->pcie_error_reporting_is_enabled) |
| 5115 | pci_disable_pcie_error_reporting(pdev); |
| 5116 | |
| 5117 | err_out_regions: |
| 5118 | pci_release_regions(pdev); |
| 5119 | |
| 5120 | err_out: |
| 5121 | pci_disable_device(pdev); |
| 5122 | return rc; |
| 5123 | } |
| 5124 | |
| 5125 | static void skd_pci_shutdown(struct pci_dev *pdev) |
| 5126 | { |
| 5127 | struct skd_device *skdev; |
| 5128 | |
| 5129 | pr_err("skd_pci_shutdown called\n"); |
| 5130 | |
| 5131 | skdev = pci_get_drvdata(pdev); |
| 5132 | if (!skdev) { |
| 5133 | pr_err("%s: no device data for PCI\n", pci_name(pdev)); |
| 5134 | return; |
| 5135 | } |
| 5136 | |
| 5137 | pr_err("%s: calling stop\n", skd_name(skdev)); |
| 5138 | skd_stop_device(skdev); |
| 5139 | } |
| 5140 | |
| 5141 | static struct pci_driver skd_driver = { |
| 5142 | .name = DRV_NAME, |
| 5143 | .id_table = skd_pci_tbl, |
| 5144 | .probe = skd_pci_probe, |
| 5145 | .remove = skd_pci_remove, |
| 5146 | .suspend = skd_pci_suspend, |
| 5147 | .resume = skd_pci_resume, |
| 5148 | .shutdown = skd_pci_shutdown, |
| 5149 | }; |
| 5150 | |
| 5151 | /* |
| 5152 | ***************************************************************************** |
| 5153 | * LOGGING SUPPORT |
| 5154 | ***************************************************************************** |
| 5155 | */ |
| 5156 | |
| 5157 | static const char *skd_name(struct skd_device *skdev) |
| 5158 | { |
| 5159 | memset(skdev->id_str, 0, sizeof(skdev->id_str)); |
| 5160 | |
| 5161 | if (skdev->inquiry_is_valid) |
| 5162 | snprintf(skdev->id_str, sizeof(skdev->id_str), "%s:%s:[%s]", |
| 5163 | skdev->name, skdev->inq_serial_num, |
| 5164 | pci_name(skdev->pdev)); |
| 5165 | else |
| 5166 | snprintf(skdev->id_str, sizeof(skdev->id_str), "%s:??:[%s]", |
| 5167 | skdev->name, pci_name(skdev->pdev)); |
| 5168 | |
| 5169 | return skdev->id_str; |
| 5170 | } |
| 5171 | |
| 5172 | const char *skd_drive_state_to_str(int state) |
| 5173 | { |
| 5174 | switch (state) { |
| 5175 | case FIT_SR_DRIVE_OFFLINE: |
| 5176 | return "OFFLINE"; |
| 5177 | case FIT_SR_DRIVE_INIT: |
| 5178 | return "INIT"; |
| 5179 | case FIT_SR_DRIVE_ONLINE: |
| 5180 | return "ONLINE"; |
| 5181 | case FIT_SR_DRIVE_BUSY: |
| 5182 | return "BUSY"; |
| 5183 | case FIT_SR_DRIVE_FAULT: |
| 5184 | return "FAULT"; |
| 5185 | case FIT_SR_DRIVE_DEGRADED: |
| 5186 | return "DEGRADED"; |
| 5187 | case FIT_SR_PCIE_LINK_DOWN: |
| 5188 | return "INK_DOWN"; |
| 5189 | case FIT_SR_DRIVE_SOFT_RESET: |
| 5190 | return "SOFT_RESET"; |
| 5191 | case FIT_SR_DRIVE_NEED_FW_DOWNLOAD: |
| 5192 | return "NEED_FW"; |
| 5193 | case FIT_SR_DRIVE_INIT_FAULT: |
| 5194 | return "INIT_FAULT"; |
| 5195 | case FIT_SR_DRIVE_BUSY_SANITIZE: |
| 5196 | return "BUSY_SANITIZE"; |
| 5197 | case FIT_SR_DRIVE_BUSY_ERASE: |
| 5198 | return "BUSY_ERASE"; |
| 5199 | case FIT_SR_DRIVE_FW_BOOTING: |
| 5200 | return "FW_BOOTING"; |
| 5201 | default: |
| 5202 | return "???"; |
| 5203 | } |
| 5204 | } |
| 5205 | |
| 5206 | const char *skd_skdev_state_to_str(enum skd_drvr_state state) |
| 5207 | { |
| 5208 | switch (state) { |
| 5209 | case SKD_DRVR_STATE_LOAD: |
| 5210 | return "LOAD"; |
| 5211 | case SKD_DRVR_STATE_IDLE: |
| 5212 | return "IDLE"; |
| 5213 | case SKD_DRVR_STATE_BUSY: |
| 5214 | return "BUSY"; |
| 5215 | case SKD_DRVR_STATE_STARTING: |
| 5216 | return "STARTING"; |
| 5217 | case SKD_DRVR_STATE_ONLINE: |
| 5218 | return "ONLINE"; |
| 5219 | case SKD_DRVR_STATE_PAUSING: |
| 5220 | return "PAUSING"; |
| 5221 | case SKD_DRVR_STATE_PAUSED: |
| 5222 | return "PAUSED"; |
| 5223 | case SKD_DRVR_STATE_DRAINING_TIMEOUT: |
| 5224 | return "DRAINING_TIMEOUT"; |
| 5225 | case SKD_DRVR_STATE_RESTARTING: |
| 5226 | return "RESTARTING"; |
| 5227 | case SKD_DRVR_STATE_RESUMING: |
| 5228 | return "RESUMING"; |
| 5229 | case SKD_DRVR_STATE_STOPPING: |
| 5230 | return "STOPPING"; |
| 5231 | case SKD_DRVR_STATE_SYNCING: |
| 5232 | return "SYNCING"; |
| 5233 | case SKD_DRVR_STATE_FAULT: |
| 5234 | return "FAULT"; |
| 5235 | case SKD_DRVR_STATE_DISAPPEARED: |
| 5236 | return "DISAPPEARED"; |
| 5237 | case SKD_DRVR_STATE_BUSY_ERASE: |
| 5238 | return "BUSY_ERASE"; |
| 5239 | case SKD_DRVR_STATE_BUSY_SANITIZE: |
| 5240 | return "BUSY_SANITIZE"; |
| 5241 | case SKD_DRVR_STATE_BUSY_IMMINENT: |
| 5242 | return "BUSY_IMMINENT"; |
| 5243 | case SKD_DRVR_STATE_WAIT_BOOT: |
| 5244 | return "WAIT_BOOT"; |
| 5245 | |
| 5246 | default: |
| 5247 | return "???"; |
| 5248 | } |
| 5249 | } |
| 5250 | |
Rashika Kheria | a26ba7f | 2013-12-19 15:02:22 +0530 | [diff] [blame] | 5251 | static const char *skd_skmsg_state_to_str(enum skd_fit_msg_state state) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5252 | { |
| 5253 | switch (state) { |
| 5254 | case SKD_MSG_STATE_IDLE: |
| 5255 | return "IDLE"; |
| 5256 | case SKD_MSG_STATE_BUSY: |
| 5257 | return "BUSY"; |
| 5258 | default: |
| 5259 | return "???"; |
| 5260 | } |
| 5261 | } |
| 5262 | |
Rashika Kheria | a26ba7f | 2013-12-19 15:02:22 +0530 | [diff] [blame] | 5263 | static const char *skd_skreq_state_to_str(enum skd_req_state state) |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5264 | { |
| 5265 | switch (state) { |
| 5266 | case SKD_REQ_STATE_IDLE: |
| 5267 | return "IDLE"; |
| 5268 | case SKD_REQ_STATE_SETUP: |
| 5269 | return "SETUP"; |
| 5270 | case SKD_REQ_STATE_BUSY: |
| 5271 | return "BUSY"; |
| 5272 | case SKD_REQ_STATE_COMPLETED: |
| 5273 | return "COMPLETED"; |
| 5274 | case SKD_REQ_STATE_TIMEOUT: |
| 5275 | return "TIMEOUT"; |
| 5276 | case SKD_REQ_STATE_ABORTED: |
| 5277 | return "ABORTED"; |
| 5278 | default: |
| 5279 | return "???"; |
| 5280 | } |
| 5281 | } |
| 5282 | |
| 5283 | static void skd_log_skdev(struct skd_device *skdev, const char *event) |
| 5284 | { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 5285 | pr_debug("%s:%s:%d (%s) skdev=%p event='%s'\n", |
| 5286 | skdev->name, __func__, __LINE__, skdev->name, skdev, event); |
| 5287 | pr_debug("%s:%s:%d drive_state=%s(%d) driver_state=%s(%d)\n", |
| 5288 | skdev->name, __func__, __LINE__, |
| 5289 | skd_drive_state_to_str(skdev->drive_state), skdev->drive_state, |
| 5290 | skd_skdev_state_to_str(skdev->state), skdev->state); |
| 5291 | pr_debug("%s:%s:%d busy=%d limit=%d dev=%d lowat=%d\n", |
| 5292 | skdev->name, __func__, __LINE__, |
| 5293 | skdev->in_flight, skdev->cur_max_queue_depth, |
| 5294 | skdev->dev_max_queue_depth, skdev->queue_low_water_mark); |
| 5295 | pr_debug("%s:%s:%d timestamp=0x%x cycle=%d cycle_ix=%d\n", |
| 5296 | skdev->name, __func__, __LINE__, |
| 5297 | skdev->timeout_stamp, skdev->skcomp_cycle, skdev->skcomp_ix); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5298 | } |
| 5299 | |
| 5300 | static void skd_log_skmsg(struct skd_device *skdev, |
| 5301 | struct skd_fitmsg_context *skmsg, const char *event) |
| 5302 | { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 5303 | pr_debug("%s:%s:%d (%s) skmsg=%p event='%s'\n", |
| 5304 | skdev->name, __func__, __LINE__, skdev->name, skmsg, event); |
| 5305 | pr_debug("%s:%s:%d state=%s(%d) id=0x%04x length=%d\n", |
| 5306 | skdev->name, __func__, __LINE__, |
| 5307 | skd_skmsg_state_to_str(skmsg->state), skmsg->state, |
| 5308 | skmsg->id, skmsg->length); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5309 | } |
| 5310 | |
| 5311 | static void skd_log_skreq(struct skd_device *skdev, |
| 5312 | struct skd_request_context *skreq, const char *event) |
| 5313 | { |
rchinthekindi | 2e44b42 | 2013-10-24 12:51:23 +0100 | [diff] [blame] | 5314 | pr_debug("%s:%s:%d (%s) skreq=%p event='%s'\n", |
| 5315 | skdev->name, __func__, __LINE__, skdev->name, skreq, event); |
| 5316 | pr_debug("%s:%s:%d state=%s(%d) id=0x%04x fitmsg=0x%04x\n", |
| 5317 | skdev->name, __func__, __LINE__, |
| 5318 | skd_skreq_state_to_str(skreq->state), skreq->state, |
| 5319 | skreq->id, skreq->fitmsg_id); |
| 5320 | pr_debug("%s:%s:%d timo=0x%x sg_dir=%d n_sg=%d\n", |
| 5321 | skdev->name, __func__, __LINE__, |
| 5322 | skreq->timeout_stamp, skreq->sg_data_dir, skreq->n_sg); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5323 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 5324 | if (skreq->req != NULL) { |
| 5325 | struct request *req = skreq->req; |
| 5326 | u32 lba = (u32)blk_rq_pos(req); |
| 5327 | u32 count = blk_rq_sectors(req); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5328 | |
Jens Axboe | fcd37eb | 2013-11-01 10:14:56 -0600 | [diff] [blame] | 5329 | pr_debug("%s:%s:%d " |
| 5330 | "req=%p lba=%u(0x%x) count=%u(0x%x) dir=%d\n", |
| 5331 | skdev->name, __func__, __LINE__, |
| 5332 | req, lba, lba, count, count, |
| 5333 | (int)rq_data_dir(req)); |
| 5334 | } else |
| 5335 | pr_debug("%s:%s:%d req=NULL\n", |
| 5336 | skdev->name, __func__, __LINE__); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5337 | } |
| 5338 | |
| 5339 | /* |
| 5340 | ***************************************************************************** |
| 5341 | * MODULE GLUE |
| 5342 | ***************************************************************************** |
| 5343 | */ |
| 5344 | |
| 5345 | static int __init skd_init(void) |
| 5346 | { |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5347 | pr_info(PFX " v%s-b%s loaded\n", DRV_VERSION, DRV_BUILD_ID); |
| 5348 | |
| 5349 | switch (skd_isr_type) { |
| 5350 | case SKD_IRQ_LEGACY: |
| 5351 | case SKD_IRQ_MSI: |
| 5352 | case SKD_IRQ_MSIX: |
| 5353 | break; |
| 5354 | default: |
Bartlomiej Zolnierkiewicz | fbed149 | 2013-11-05 12:37:01 +0100 | [diff] [blame] | 5355 | pr_err(PFX "skd_isr_type %d invalid, re-set to %d\n", |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5356 | skd_isr_type, SKD_IRQ_DEFAULT); |
| 5357 | skd_isr_type = SKD_IRQ_DEFAULT; |
| 5358 | } |
| 5359 | |
Bartlomiej Zolnierkiewicz | fbed149 | 2013-11-05 12:37:01 +0100 | [diff] [blame] | 5360 | if (skd_max_queue_depth < 1 || |
| 5361 | skd_max_queue_depth > SKD_MAX_QUEUE_DEPTH) { |
| 5362 | pr_err(PFX "skd_max_queue_depth %d invalid, re-set to %d\n", |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5363 | skd_max_queue_depth, SKD_MAX_QUEUE_DEPTH_DEFAULT); |
| 5364 | skd_max_queue_depth = SKD_MAX_QUEUE_DEPTH_DEFAULT; |
| 5365 | } |
| 5366 | |
| 5367 | if (skd_max_req_per_msg < 1 || skd_max_req_per_msg > 14) { |
Bartlomiej Zolnierkiewicz | fbed149 | 2013-11-05 12:37:01 +0100 | [diff] [blame] | 5368 | pr_err(PFX "skd_max_req_per_msg %d invalid, re-set to %d\n", |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5369 | skd_max_req_per_msg, SKD_MAX_REQ_PER_MSG_DEFAULT); |
| 5370 | skd_max_req_per_msg = SKD_MAX_REQ_PER_MSG_DEFAULT; |
| 5371 | } |
| 5372 | |
| 5373 | if (skd_sgs_per_request < 1 || skd_sgs_per_request > 4096) { |
Bartlomiej Zolnierkiewicz | fbed149 | 2013-11-05 12:37:01 +0100 | [diff] [blame] | 5374 | pr_err(PFX "skd_sg_per_request %d invalid, re-set to %d\n", |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5375 | skd_sgs_per_request, SKD_N_SG_PER_REQ_DEFAULT); |
| 5376 | skd_sgs_per_request = SKD_N_SG_PER_REQ_DEFAULT; |
| 5377 | } |
| 5378 | |
| 5379 | if (skd_dbg_level < 0 || skd_dbg_level > 2) { |
Bartlomiej Zolnierkiewicz | fbed149 | 2013-11-05 12:37:01 +0100 | [diff] [blame] | 5380 | pr_err(PFX "skd_dbg_level %d invalid, re-set to %d\n", |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5381 | skd_dbg_level, 0); |
| 5382 | skd_dbg_level = 0; |
| 5383 | } |
| 5384 | |
| 5385 | if (skd_isr_comp_limit < 0) { |
Bartlomiej Zolnierkiewicz | fbed149 | 2013-11-05 12:37:01 +0100 | [diff] [blame] | 5386 | pr_err(PFX "skd_isr_comp_limit %d invalid, set to %d\n", |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5387 | skd_isr_comp_limit, 0); |
| 5388 | skd_isr_comp_limit = 0; |
| 5389 | } |
| 5390 | |
| 5391 | if (skd_max_pass_thru < 1 || skd_max_pass_thru > 50) { |
Bartlomiej Zolnierkiewicz | fbed149 | 2013-11-05 12:37:01 +0100 | [diff] [blame] | 5392 | pr_err(PFX "skd_max_pass_thru %d invalid, re-set to %d\n", |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5393 | skd_max_pass_thru, SKD_N_SPECIAL_CONTEXT); |
| 5394 | skd_max_pass_thru = SKD_N_SPECIAL_CONTEXT; |
| 5395 | } |
| 5396 | |
Bartlomiej Zolnierkiewicz | b8df664 | 2013-11-05 12:37:02 +0100 | [diff] [blame] | 5397 | return pci_register_driver(&skd_driver); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5398 | } |
| 5399 | |
| 5400 | static void __exit skd_exit(void) |
| 5401 | { |
| 5402 | pr_info(PFX " v%s-b%s unloading\n", DRV_VERSION, DRV_BUILD_ID); |
| 5403 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5404 | pci_unregister_driver(&skd_driver); |
Bartlomiej Zolnierkiewicz | b8df664 | 2013-11-05 12:37:02 +0100 | [diff] [blame] | 5405 | |
| 5406 | if (skd_major) |
| 5407 | unregister_blkdev(skd_major, DRV_NAME); |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5408 | } |
| 5409 | |
Akhil Bhansali | e67f86b | 2013-10-15 14:19:07 -0600 | [diff] [blame] | 5410 | module_init(skd_init); |
| 5411 | module_exit(skd_exit); |