Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.19 / e2047e33f2bd2713f6924c6dc2bf13e15784402e / . / arch / arm / boot / dts / imx6qdl-rex.dtsi
blob: df7bcf86c156958c99c844ed09212643a576305d [file] [log] [blame]
Robert Nelsone2047e32014-07-08 09:49:22 -0500[diff] [blame^]1/*
2 * Copyright 2014 FEDEVEL, Inc.
3 *
4 * Author: Robert Nelson <robertcnelson@gmail.com>
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 */
11
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/input/input.h>
14
15/ {
16 chosen {
17 stdout-path = &uart1;
18 };
19
20 regulators {
21 compatible = "simple-bus";
22 #address-cells = <1>;
23 #size-cells = <0>;
24
25 reg_3p3v: regulator@0 {
26 compatible = "regulator-fixed";
27 reg = <0>;
28 regulator-name = "3P3V";
29 regulator-min-microvolt = <3300000>;
30 regulator-max-microvolt = <3300000>;
31 regulator-always-on;
32 };
33
34 reg_usbh1_vbus: regulator@1 {
35 compatible = "regulator-fixed";
36 reg = <1>;
37 pinctrl-names = "default";
38 pinctrl-0 = <&pinctrl_usbh1>;
39 regulator-name = "usbh1_vbus";
40 regulator-min-microvolt = <5000000>;
41 regulator-max-microvolt = <5000000>;
42 gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
43 enable-active-high;
44 };
45
46 reg_usb_otg_vbus: regulator@2 {
47 compatible = "regulator-fixed";
48 reg = <2>;
49 pinctrl-names = "default";
50 pinctrl-0 = <&pinctrl_usbotg>;
51 regulator-name = "usb_otg_vbus";
52 regulator-min-microvolt = <5000000>;
53 regulator-max-microvolt = <5000000>;
54 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
55 enable-active-high;
56 };
57 };
58
59 leds {
60 compatible = "gpio-leds";
61 pinctrl-names = "default";
62 pinctrl-0 = <&pinctrl_led>;
63
64 led0: usr {
65 label = "usr";
66 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
67 default-state = "off";
68 linux,default-trigger = "heartbeat";
69 };
70 };
71
72 sound {
73 compatible = "fsl,imx6-rex-sgtl5000",
74 "fsl,imx-audio-sgtl5000";
75 model = "imx6-rex-sgtl5000";
76 ssi-controller = <&ssi1>;
77 audio-codec = <&codec>;
78 audio-routing =
79 "MIC_IN", "Mic Jack",
80 "Mic Jack", "Mic Bias",
81 "Headphone Jack", "HP_OUT";
82 mux-int-port = <1>;
83 mux-ext-port = <3>;
84 };
85};
86
87&audmux {
88 pinctrl-names = "default";
89 pinctrl-0 = <&pinctrl_audmux>;
90 status = "okay";
91};
92
93&ecspi2 {
94 fsl,spi-num-chipselects = <1>;
95 cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
96 pinctrl-names = "default";
97 pinctrl-0 = <&pinctrl_ecspi2>;
98 status = "okay";
99};
100
101&ecspi3 {
102 fsl,spi-num-chipselects = <1>;
103 cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
104 pinctrl-names = "default";
105 pinctrl-0 = <&pinctrl_ecspi3>;
106 status = "okay";
107};
108
109&fec {
110 pinctrl-names = "default";
111 pinctrl-0 = <&pinctrl_enet>;
112 phy-mode = "rgmii";
113 phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
114 status = "okay";
115};
116
117&hdmi {
118 ddc-i2c-bus = <&i2c2>;
119 status = "okay";
120};
121
122&i2c1 {
123 clock-frequency = <100000>;
124 pinctrl-names = "default";
125 pinctrl-0 = <&pinctrl_i2c1>;
126 status = "okay";
127
128 codec: sgtl5000@0a {
129 compatible = "fsl,sgtl5000";
130 reg = <0x0a>;
131 clocks = <&clks 201>;
132 VDDA-supply = <&reg_3p3v>;
133 VDDIO-supply = <&reg_3p3v>;
134 };
135};
136
137&i2c2 {
138 clock-frequency = <100000>;
139 pinctrl-names = "default";
140 pinctrl-0 = <&pinctrl_i2c2>;
141 status = "okay";
142
143 eeprom@57 {
144 compatible = "at,24c02";
145 reg = <0x57>;
146 };
147};
148
149&i2c3 {
150 clock-frequency = <100000>;
151 pinctrl-names = "default";
152 pinctrl-0 = <&pinctrl_i2c3>;
153 status = "okay";
154};
155
156&iomuxc {
157 pinctrl-names = "default";
158 pinctrl-0 = <&pinctrl_hog>;
159
160 imx6qdl-rex {
161 pinctrl_hog: hoggrp {
162 fsl,pins = <
163 /* SGTL5000 sys_mclk */
164 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0
165 >;
166 };
167
168 pinctrl_audmux: audmuxgrp {
169 fsl,pins = <
170 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
171 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
172 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
173 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
174 >;
175 };
176
177 pinctrl_ecspi2: ecspi2grp {
178 fsl,pins = <
179 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
180 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
181 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
182 /* CS */
183 MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x000b1
184 >;
185 };
186
187 pinctrl_ecspi3: ecspi3grp {
188 fsl,pins = <
189 MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
190 MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
191 MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
192 /* CS */
193 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1
194 >;
195 };
196
197 pinctrl_enet: enetgrp {
198 fsl,pins = <
199 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
200 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
201 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
202 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
203 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
204 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
205 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
206 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
207 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
208 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
209 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
210 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
211 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
212 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
213 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
214 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
215 /* Phy reset */
216 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0
217 >;
218 };
219
220 pinctrl_i2c1: i2c1grp {
221 fsl,pins = <
222 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
223 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
224 >;
225 };
226
227 pinctrl_i2c2: i2c2grp {
228 fsl,pins = <
229 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
230 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
231 >;
232 };
233
234 pinctrl_i2c3: i2c3grp {
235 fsl,pins = <
236 MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
237 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
238 >;
239 };
240
241 pinctrl_led: ledgrp {
242 fsl,pins = <
243 /* user led */
244 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
245 >;
246 };
247
248 pinctrl_uart1: uart1grp {
249 fsl,pins = <
250 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
251 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
252 >;
253 };
254
255 pinctrl_uart2: uart2grp {
256 fsl,pins = <
257 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
258 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
259 >;
260 };
261
262 pinctrl_usbh1: usbh1grp {
263 fsl,pins = <
264 /* power enable, high active */
265 MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x10b0
266 >;
267 };
268
269 pinctrl_usbotg: usbotggrp {
270 fsl,pins = <
271 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
272 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
273 /* power enable, high active */
274 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0
275 >;
276 };
277
278 pinctrl_usdhc2: usdhc2grp {
279 fsl,pins = <
280 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
281 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
282 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
283 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
284 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
285 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
286 /* CD */
287 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
288 /* WP */
289 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1f0b0
290 >;
291 };
292
293 pinctrl_usdhc3: usdhc3grp {
294 fsl,pins = <
295 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
296 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
297 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
298 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
299 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
300 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
301 /* CD */
302 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
303 /* WP */
304 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1f0b0
305 >;
306 };
307 };
308};
309
310&ssi1 {
311 fsl,mode = "i2s-slave";
312 status = "okay";
313};
314
315&uart1 {
316 pinctrl-names = "default";
317 pinctrl-0 = <&pinctrl_uart1>;
318 status = "okay";
319};
320
321&uart2 {
322 pinctrl-names = "default";
323 pinctrl-0 = <&pinctrl_uart2>;
324 status = "okay";
325};
326
327&usbh1 {
328 vbus-supply = <&reg_usbh1_vbus>;
329 pinctrl-names = "default";
330 pinctrl-0 = <&pinctrl_usbh1>;
331 status = "okay";
332};
333
334&usbotg {
335 vbus-supply = <&reg_usb_otg_vbus>;
336 pinctrl-names = "default";
337 pinctrl-0 = <&pinctrl_usbotg>;
338 status = "okay";
339};
340
341&usdhc2 {
342 pinctrl-names = "default";
343 pinctrl-0 = <&pinctrl_usdhc2>;
344 bus-width = <4>;
345 cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
346 wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
347 status = "okay";
348};
349
350&usdhc3 {
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_usdhc3>;
353 bus-width = <4>;
354 cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
355 wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
356 status = "okay";
357};